diff options
Diffstat (limited to 'dts/Bindings/net/dsa/qca8k.yaml')
| -rw-r--r-- | dts/Bindings/net/dsa/qca8k.yaml | 40 |
1 files changed, 26 insertions, 14 deletions
diff --git a/dts/Bindings/net/dsa/qca8k.yaml b/dts/Bindings/net/dsa/qca8k.yaml index f3c88371d7..167398ab25 100644 --- a/dts/Bindings/net/dsa/qca8k.yaml +++ b/dts/Bindings/net/dsa/qca8k.yaml @@ -18,6 +18,8 @@ description: PHY it is connected to. In this config, an internal mdio-bus is registered and the MDIO master is used for communication. Mixed external and internal mdio-bus configurations are not supported by the hardware. + Each phy has at most 3 LEDs connected and can be declared + using the standard LEDs structure. properties: compatible: @@ -66,15 +68,12 @@ properties: With the legacy mapping the reg corresponding to the internal mdio is the switch reg with an offset of -1. +$ref: dsa.yaml# + patternProperties: "^(ethernet-)?ports$": type: object - properties: - '#address-cells': - const: 1 - '#size-cells': - const: 0 - + additionalProperties: true patternProperties: "^(ethernet-)?port@[0-6]$": type: object @@ -116,11 +115,12 @@ required: - compatible - reg -additionalProperties: true +unevaluatedProperties: false examples: - | #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/leds/common.h> mdio { #address-cells = <1>; @@ -148,8 +148,6 @@ examples: switch@10 { compatible = "qca,qca8337"; - #address-cells = <1>; - #size-cells = <0>; reset-gpios = <&gpio 42 GPIO_ACTIVE_LOW>; reg = <0x10>; @@ -159,7 +157,6 @@ examples: port@0 { reg = <0>; - label = "cpu"; ethernet = <&gmac1>; phy-mode = "rgmii"; @@ -210,8 +207,6 @@ examples: switch@10 { compatible = "qca,qca8337"; - #address-cells = <1>; - #size-cells = <0>; reset-gpios = <&gpio 42 GPIO_ACTIVE_LOW>; reg = <0x10>; @@ -221,7 +216,6 @@ examples: port@0 { reg = <0>; - label = "cpu"; ethernet = <&gmac1>; phy-mode = "rgmii"; @@ -236,6 +230,25 @@ examples: label = "lan1"; phy-mode = "internal"; phy-handle = <&internal_phy_port1>; + + leds { + #address-cells = <1>; + #size-cells = <0>; + + led@0 { + reg = <0>; + color = <LED_COLOR_ID_WHITE>; + function = LED_FUNCTION_LAN; + default-state = "keep"; + }; + + led@1 { + reg = <1>; + color = <LED_COLOR_ID_AMBER>; + function = LED_FUNCTION_LAN; + default-state = "keep"; + }; + }; }; port@2 { @@ -268,7 +281,6 @@ examples: port@6 { reg = <0>; - label = "cpu"; ethernet = <&gmac1>; phy-mode = "sgmii"; |