diff options
Diffstat (limited to 'dts/Bindings/net/ethernet.txt')
| -rw-r--r-- | dts/Bindings/net/ethernet.txt | 12 |
1 files changed, 9 insertions, 3 deletions
diff --git a/dts/Bindings/net/ethernet.txt b/dts/Bindings/net/ethernet.txt index 3a6916909d..7da86f22a1 100644 --- a/dts/Bindings/net/ethernet.txt +++ b/dts/Bindings/net/ethernet.txt @@ -8,9 +8,11 @@ The following properties are common to the Ethernet controllers: property; - max-speed: number, specifies maximum speed in Mbit/s supported by the device; - max-frame-size: number, maximum transfer unit (IEEE defined MTU), rather than - the maximum frame size (there's contradiction in ePAPR). + the maximum frame size (there's contradiction in the Devicetree + Specification). - phy-mode: string, operation mode of the PHY interface. This is now a de-facto standard property; supported values are: + * "internal" * "mii" * "gmii" * "sgmii" @@ -32,9 +34,13 @@ The following properties are common to the Ethernet controllers: * "2000base-x", * "2500base-x", * "rxaui" -- phy-connection-type: the same as "phy-mode" property but described in ePAPR; + * "xaui" + * "10gbase-kr" (10GBASE-KR, XFI, SFI) +- phy-connection-type: the same as "phy-mode" property but described in the + Devicetree Specification; - phy-handle: phandle, specifies a reference to a node representing a PHY - device; this property is described in ePAPR and so preferred; + device; this property is described in the Devicetree Specification and so + preferred; - phy: the same as "phy-handle" property, not recommended for new bindings. - phy-device: the same as "phy-handle" property, not recommended for new bindings. |