1 files changed, 0 insertions, 48 deletions
diff --git a/dts/Bindings/net/mdio-mux-meson-g12a.txt b/dts/Bindings/net/mdio-mux-meson-g12a.txt
deleted file mode 100644
index 3a96cbed92..0000000000
--- a/dts/Bindings/net/mdio-mux-meson-g12a.txt
+++ /dev/null
@@ -1,48 +0,0 @@
-Properties for the MDIO bus multiplexer/glue of Amlogic G12a SoC family.
-
-This is a special case of a MDIO bus multiplexer. It allows to choose between
-the internal mdio bus leading to the embedded 10/100 PHY or the external
-MDIO bus.
-
-Required properties in addition to the generic multiplexer properties:
-- compatible : amlogic,g12a-mdio-mux
-- reg: physical address and length of the multiplexer/glue registers
-- clocks: list of clock phandle, one for each entry clock-names.
-- clock-names: should contain the following:
-  * "pclk"   : peripheral clock.
-  * "clkin0" : platform crytal
-  * "clkin1" : SoC 50MHz MPLL
-
-Example :
-
-mdio_mux: mdio-multiplexer@4c000 {
-	compatible = "amlogic,g12a-mdio-mux";
-	reg = <0x0 0x4c000 0x0 0xa4>;
-	clocks = <&clkc CLKID_ETH_PHY>,
-		 <&xtal>,
-		 <&clkc CLKID_MPLL_5OM>;
-	clock-names = "pclk", "clkin0", "clkin1";
-	mdio-parent-bus = <&mdio0>;
-	#address-cells = <1>;
-	#size-cells = <0>;
-
-	ext_mdio: mdio@0 {
-		reg = <0>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-	};
-
-	int_mdio: mdio@1 {
-		reg = <1>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		internal_ephy: ethernet-phy@8 {
-			compatible = "ethernet-phy-id0180.3301",
-				     "ethernet-phy-ieee802.3-c22";
-			interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
-			reg = <8>;
-			max-speed = <100>;
-		};
-	};
-};