1 files changed, 0 insertions, 82 deletions
diff --git a/dts/Bindings/net/mdio-mux-multiplexer.txt b/dts/Bindings/net/mdio-mux-multiplexer.txt
deleted file mode 100644
index 534e38058f..0000000000
--- a/dts/Bindings/net/mdio-mux-multiplexer.txt
+++ /dev/null
@@ -1,82 +0,0 @@
-Properties for an MDIO bus multiplexer consumer device
-
-This is a special case of MDIO mux  when MDIO mux is defined as a consumer
-of a mux producer device. The mux producer can be of any type like mmio mux
-producer, gpio mux producer or generic register based mux producer.
-
-Required properties in addition to the MDIO Bus multiplexer properties:
-
-- compatible : should be "mmio-mux-multiplexer"
-- mux-controls : mux controller node to use for operating the mux
-- mdio-parent-bus : phandle to the parent MDIO bus.
-
-each child node of mdio bus multiplexer consumer device represent a mdio
-bus.
-
-for more information please refer
-Documentation/devicetree/bindings/mux/mux-controller.txt
-and Documentation/devicetree/bindings/net/mdio-mux.txt
-
-Example:
-In below example the Mux producer and consumer are separate nodes.
-
-&i2c0 {
-	fpga@66 { // fpga connected to i2c
-		compatible = "fsl,lx2160aqds-fpga", "fsl,fpga-qixis-i2c",
-			     "simple-mfd";
-		reg = <0x66>;
-
-		mux: mux-controller { // Mux Producer
-			compatible = "reg-mux";
-			#mux-control-cells = <1>;
-			mux-reg-masks = <0x54 0xf8>, /* 0: reg 0x54, bits 7:3 */
-					<0x54 0x07>; /* 1: reg 0x54, bits 2:0 */
-		};
-	};
-};
-
-mdio-mux-1 { // Mux consumer
-	compatible = "mdio-mux-multiplexer";
-	mux-controls = <&mux 0>;
-	mdio-parent-bus = <&emdio1>;
-	#address-cells = <1>;
-	#size-cells = <0>;
-
-	mdio@0 {
-		reg = <0x0>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-	};
-
-	mdio@8 {
-		reg = <0x8>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-	};
-
-	..
-	..
-};
-
-mdio-mux-2 { // Mux consumer
-	compatible = "mdio-mux-multiplexer";
-	mux-controls = <&mux 1>;
-	mdio-parent-bus = <&emdio2>;
-	#address-cells = <1>;
-	#size-cells = <0>;
-
-	mdio@0 {
-		reg = <0x0>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-	};
-
-	mdio@1 {
-		reg = <0x1>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-	};
-
-	..
-	..
-};