1 files changed, 0 insertions, 64 deletions
diff --git a/dts/Bindings/net/qcom,ethqos.txt b/dts/Bindings/net/qcom,ethqos.txt
deleted file mode 100644
index fcf5035810..0000000000
--- a/dts/Bindings/net/qcom,ethqos.txt
+++ /dev/null
@@ -1,64 +0,0 @@
-Qualcomm Ethernet ETHQOS device
-
-This documents dwmmac based ethernet device which supports Gigabit
-ethernet for version v2.3.0 onwards.
-
-This device has following properties:
-
-Required properties:
-
-- compatible: Should be qcom,qcs404-ethqos"
-
-- reg: Address and length of the register set for the device
-
-- reg-names: Should contain register names "stmmaceth", "rgmii"
-
-- clocks: Should contain phandle to clocks
-
-- clock-names: Should contain clock names "stmmaceth", "pclk",
-		"ptp_ref", "rgmii"
-
-- interrupts: Should contain phandle to interrupts
-
-- interrupt-names: Should contain interrupt names "macirq", "eth_lpi"
-
-Rest of the properties are defined in stmmac.txt file in same directory
-
-
-Example:
-
-ethernet: ethernet@7a80000 {
-	compatible = "qcom,qcs404-ethqos";
-	reg = <0x07a80000 0x10000>,
-		<0x07a96000 0x100>;
-	reg-names = "stmmaceth", "rgmii";
-	clock-names = "stmmaceth", "pclk", "ptp_ref", "rgmii";
-	clocks = <&gcc GCC_ETH_AXI_CLK>,
-		<&gcc GCC_ETH_SLAVE_AHB_CLK>,
-		<&gcc GCC_ETH_PTP_CLK>,
-		<&gcc GCC_ETH_RGMII_CLK>;
-	interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>,
-			<GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
-	interrupt-names = "macirq", "eth_lpi";
-	snps,reset-gpio = <&tlmm 60 GPIO_ACTIVE_LOW>;
-	snps,reset-active-low;
-
-	snps,txpbl = <8>;
-	snps,rxpbl = <2>;
-	snps,aal;
-	snps,tso;
-
-	phy-handle = <&phy1>;
-	phy-mode = "rgmii";
-
-	mdio {
-		#address-cells = <0x1>;
-		#size-cells = <0x0>;
-		compatible = "snps,dwmac-mdio";
-		phy1: phy@4 {
-			device_type = "ethernet-phy";
-			reg = <0x4>;
-		};
-	};
-
-};