1 files changed, 109 insertions, 0 deletions
diff --git a/dts/Bindings/net/wireless/brcm,bcm4329-fmac.yaml b/dts/Bindings/net/wireless/brcm,bcm4329-fmac.yaml
new file mode 100644
index 0000000000..c11f23b20c
--- /dev/null
+++ b/dts/Bindings/net/wireless/brcm,bcm4329-fmac.yaml
@@ -0,0 +1,109 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/wireless/brcm,bcm4329-fmac.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom BCM4329 family fullmac wireless SDIO devices
+
+maintainers:
+  - Arend van Spriel <arend@broadcom.com>
+
+description:
+  The Broadcom Single chip MAC part for the BCM4329 family and
+  later Cypress chips in the same family named CYW4373 and similar.
+  These chips also have a Bluetooth portion described in a separate
+  binding.
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - brcm,bcm43143-fmac
+              - brcm,bcm4341b0-fmac
+              - brcm,bcm4341b4-fmac
+              - brcm,bcm4341b5-fmac
+              - brcm,bcm4329-fmac
+              - brcm,bcm4330-fmac
+              - brcm,bcm4334-fmac
+              - brcm,bcm43340-fmac
+              - brcm,bcm4335-fmac
+              - brcm,bcm43362-fmac
+              - brcm,bcm4339-fmac
+              - brcm,bcm43430a0-fmac
+              - brcm,bcm43430a1-fmac
+              - brcm,bcm43455-fmac
+              - brcm,bcm43456-fmac
+              - brcm,bcm4354-fmac
+              - brcm,bcm4356-fmac
+              - brcm,bcm4359-fmac
+              - cypress,cyw4373-fmac
+              - cypress,cyw43012-fmac
+          - const: brcm,bcm4329-fmac
+      - const: brcm,bcm4329-fmac
+
+  reg:
+    description: SDIO function number for the device, for most cases
+      this will be 1.
+
+  interrupts:
+    maxItems: 1
+    description: Out-of-band (OOB) IRQ line for waking up the host
+      in response to WLAN activity. This corresponds to the HOST_WAKE
+      line into the chip.
+
+  interrupt-names:
+    description: Name for the OOB IRQ, this must be set to "host-wake".
+    const: host-wake
+
+  brcm,drive-strength:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: Drive strength used for the SDIO pins on the device in mA.
+    minimum: 0
+    maximum: 32
+
+  reset-gpios:
+    maxItems: 1
+    description: A GPIO line connected to the WL_RST line, if present
+      this shall be flagged as active low.
+
+  brcm,ccode-map:
+    $ref: /schemas/types.yaml#/definitions/string-array
+    description: Multiple strings for translating ISO3166 country code to
+      brcmfmac firmware country code and revision.
+    items:
+      pattern: '^[A-Z][A-Z]-[A-Z][0-9A-Z]-[0-9]+$'
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/gpio/gpio.h>
+    mmc@80118000 {
+      compatible = "arm,pl18x", "arm,primecell";
+      reg = <0x80118000 0x1000>;
+      clocks = <&clk 0>, <&clk 1>;
+      clock-names = "mclk", "apb_pclk";
+      interrupts = <0 60 IRQ_TYPE_LEVEL_HIGH>;
+      bus-width = <4>;
+      non-removable;
+      vmmc-supply = <&wl_bt_reg>;
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      wifi@1 {
+        compatible = "brcm,bcm4334-fmac", "brcm,bcm4329-fmac";
+        reg = <1>;
+        interrupt-parent = <&gpio>;
+        interrupts = <24 IRQ_TYPE_EDGE_FALLING>;
+        interrupt-names = "host-wake";
+        reset-gpios = <&gpio 23 GPIO_ACTIVE_LOW>;
+        brcm,ccode-map = "JP-JP-78", "US-Q2-86";
+      };
+    };