diff options
Diffstat (limited to 'dts/Bindings/net/wireless')
-rw-r--r-- | dts/Bindings/net/wireless/brcm,bcm4329-fmac.yaml | 55 | ||||
-rw-r--r-- | dts/Bindings/net/wireless/esp,esp8089.yaml | 22 | ||||
-rw-r--r-- | dts/Bindings/net/wireless/ieee80211.yaml | 3 | ||||
-rw-r--r-- | dts/Bindings/net/wireless/marvell-8xxx.txt | 4 | ||||
-rw-r--r-- | dts/Bindings/net/wireless/mediatek,mt76.yaml | 34 | ||||
-rw-r--r-- | dts/Bindings/net/wireless/microchip,wilc1000.yaml | 9 | ||||
-rw-r--r-- | dts/Bindings/net/wireless/qca,ath9k.yaml | 4 | ||||
-rw-r--r-- | dts/Bindings/net/wireless/qcom,ath10k.txt | 215 | ||||
-rw-r--r-- | dts/Bindings/net/wireless/qcom,ath10k.yaml | 362 | ||||
-rw-r--r-- | dts/Bindings/net/wireless/qcom,ath11k-pci.yaml | 58 | ||||
-rw-r--r-- | dts/Bindings/net/wireless/qcom,ath11k.yaml | 30 | ||||
-rw-r--r-- | dts/Bindings/net/wireless/silabs,wfx.yaml | 18 | ||||
-rw-r--r-- | dts/Bindings/net/wireless/ti,wlcore.yaml | 112 |
13 files changed, 610 insertions, 316 deletions
diff --git a/dts/Bindings/net/wireless/brcm,bcm4329-fmac.yaml b/dts/Bindings/net/wireless/brcm,bcm4329-fmac.yaml index c11f23b20c..4aa521f1be 100644 --- a/dts/Bindings/net/wireless/brcm,bcm4329-fmac.yaml +++ b/dts/Bindings/net/wireless/brcm,bcm4329-fmac.yaml @@ -4,7 +4,7 @@ $id: http://devicetree.org/schemas/net/wireless/brcm,bcm4329-fmac.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# -title: Broadcom BCM4329 family fullmac wireless SDIO devices +title: Broadcom BCM4329 family fullmac wireless SDIO/PCIE devices maintainers: - Arend van Spriel <arend@broadcom.com> @@ -15,6 +15,9 @@ description: These chips also have a Bluetooth portion described in a separate binding. +allOf: + - $ref: ieee80211.yaml# + properties: compatible: oneOf: @@ -38,14 +41,21 @@ properties: - brcm,bcm4354-fmac - brcm,bcm4356-fmac - brcm,bcm4359-fmac + - brcm,bcm4366-fmac - cypress,cyw4373-fmac - cypress,cyw43012-fmac - const: brcm,bcm4329-fmac - - const: brcm,bcm4329-fmac + - enum: + - brcm,bcm4329-fmac + - pci14e4,43dc # BCM4355 + - pci14e4,4464 # BCM4364 + - pci14e4,4488 # BCM4377 + - pci14e4,4425 # BCM4378 + - pci14e4,4433 # BCM4387 reg: - description: SDIO function number for the device, for most cases - this will be 1. + description: SDIO function number for the device (for most cases + this will be 1) or PCI device identifier. interrupts: maxItems: 1 @@ -75,11 +85,46 @@ properties: items: pattern: '^[A-Z][A-Z]-[A-Z][0-9A-Z]-[0-9]+$' + brcm,ccode-map-trivial: + description: | + Use a trivial mapping of ISO3166 country codes to brcmfmac firmware + country code and revision: cc -> { cc, 0 }. In other words, assume that + the CLM blob firmware uses ISO3166 country codes as well, and that all + revisions are zero. This property is mutually exclusive with + brcm,ccode-map. If both properties are specified, then brcm,ccode-map + takes precedence. + type: boolean + + brcm,cal-blob: + $ref: /schemas/types.yaml#/definitions/uint8-array + description: A per-device calibration blob for the Wi-Fi radio. This + should be filled in by the bootloader from platform configuration + data, if necessary, and will be uploaded to the device if present. + + brcm,board-type: + $ref: /schemas/types.yaml#/definitions/string + description: Overrides the board type, which is normally the compatible of + the root node. This can be used to decouple the overall system board or + device name from the board type for WiFi purposes, which is used to + construct firmware and NVRAM configuration filenames, allowing for + multiple devices that share the same module or characteristics for the + WiFi subsystem to share the same firmware/NVRAM files. On Apple platforms, + this should be the Apple module-instance codename prefixed by "apple,", + e.g. "apple,honshu". + + apple,antenna-sku: + $ref: /schemas/types.yaml#/definitions/string + description: Antenna SKU used to identify a specific antenna configuration + on Apple platforms. This is use to build firmware filenames, to allow + platforms with different antenna configs to have different firmware and/or + NVRAM. This would normally be filled in by the bootloader from platform + configuration data. + required: - compatible - reg -additionalProperties: false +unevaluatedProperties: false examples: - | diff --git a/dts/Bindings/net/wireless/esp,esp8089.yaml b/dts/Bindings/net/wireless/esp,esp8089.yaml index 284ef45add..0ea84d6fe7 100644 --- a/dts/Bindings/net/wireless/esp,esp8089.yaml +++ b/dts/Bindings/net/wireless/esp,esp8089.yaml @@ -4,7 +4,7 @@ $id: http://devicetree.org/schemas/net/wireless/esp,esp8089.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# -title: Espressif ESP8089 Device Tree Bindings +title: Espressif ESP8089 maintainers: - Hans de Goede <hdegoede@redhat.com> @@ -29,15 +29,15 @@ additionalProperties: false examples: - | - mmc { - #address-cells = <1>; - #size-cells = <0>; - - wifi@1 { - compatible = "esp,esp8089"; - reg = <1>; - esp,crystal-26M-en = <2>; - }; - }; + mmc { + #address-cells = <1>; + #size-cells = <0>; + + wifi@1 { + compatible = "esp,esp8089"; + reg = <1>; + esp,crystal-26M-en = <2>; + }; + }; ... diff --git a/dts/Bindings/net/wireless/ieee80211.yaml b/dts/Bindings/net/wireless/ieee80211.yaml index d58e1571df..d89f7a3f88 100644 --- a/dts/Bindings/net/wireless/ieee80211.yaml +++ b/dts/Bindings/net/wireless/ieee80211.yaml @@ -1,12 +1,11 @@ # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) # Copyright (c) 2018-2019 The Linux Foundation. All rights reserved. - %YAML 1.2 --- $id: http://devicetree.org/schemas/net/wireless/ieee80211.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# -title: Common IEEE 802.11 Binding +title: Common IEEE 802.11 maintainers: - Lorenzo Bianconi <lorenzo@kernel.org> diff --git a/dts/Bindings/net/wireless/marvell-8xxx.txt b/dts/Bindings/net/wireless/marvell-8xxx.txt index 9bf9bbac16..cdc303caf5 100644 --- a/dts/Bindings/net/wireless/marvell-8xxx.txt +++ b/dts/Bindings/net/wireless/marvell-8xxx.txt @@ -1,4 +1,4 @@ -Marvell 8787/8897/8997 (sd8787/sd8897/sd8997/pcie8997) SDIO/PCIE devices +Marvell 8787/8897/8978/8997 (sd8787/sd8897/sd8978/sd8997/pcie8997) SDIO/PCIE devices ------ This node provides properties for controlling the Marvell SDIO/PCIE wireless device. @@ -10,7 +10,9 @@ Required properties: - compatible : should be one of the following: * "marvell,sd8787" * "marvell,sd8897" + * "marvell,sd8978" * "marvell,sd8997" + * "nxp,iw416" * "pci11ab,2b42" * "pci1b4b,2b42" diff --git a/dts/Bindings/net/wireless/mediatek,mt76.yaml b/dts/Bindings/net/wireless/mediatek,mt76.yaml index 5a12dc3228..252207adbc 100644 --- a/dts/Bindings/net/wireless/mediatek,mt76.yaml +++ b/dts/Bindings/net/wireless/mediatek,mt76.yaml @@ -1,12 +1,11 @@ # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) # Copyright (c) 2018-2019 The Linux Foundation. All rights reserved. - %YAML 1.2 --- $id: http://devicetree.org/schemas/net/wireless/mediatek,mt76.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# -title: MediaTek mt76 wireless devices Generic Binding +title: MediaTek mt76 wireless devices maintainers: - Felix Fietkau <nbd@nbd.name> @@ -29,6 +28,7 @@ properties: - mediatek,mt76 - mediatek,mt7628-wmac - mediatek,mt7622-wmac + - mediatek,mt7981-wmac - mediatek,mt7986-wmac reg: @@ -54,6 +54,16 @@ properties: reset-names: const: consys + clocks: + maxItems: 2 + description: + Specify the consys clocks for mt7986. + + clock-names: + items: + - const: mcu + - const: ap2conn + mediatek,infracfg: $ref: /schemas/types.yaml#/definitions/phandle description: @@ -62,6 +72,14 @@ properties: ieee80211-freq-limit: true + nvmem-cells: + items: + - description: NVMEM cell with EEPROM + + nvmem-cell-names: + items: + - const: eeprom + mediatek,eeprom-data: $ref: /schemas/types.yaml#/definitions/uint32-array description: @@ -75,6 +93,7 @@ properties: - description: offset containing EEPROM data description: Phandle to a MTD partition + offset containing EEPROM data + deprecated: true big-endian: $ref: /schemas/types.yaml#/definitions/flag @@ -102,6 +121,11 @@ properties: $ref: /schemas/leds/common.yaml# additionalProperties: false properties: + led-active-low: + description: + LED is enabled with ground signal. + type: boolean + led-sources: maxItems: 1 @@ -244,7 +268,8 @@ examples: interrupt-parent = <&cpuintc>; interrupts = <6>; - mediatek,mtd-eeprom = <&factory 0x0>; + nvmem-cells = <&eeprom>; + nvmem-cell-names = "eeprom"; }; - | @@ -269,5 +294,8 @@ examples: <0x10003000 0x1000>, <0x11d10000 0x1000>; interrupts = <GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&topckgen 50>, + <&topckgen 62>; + clock-names = "mcu", "ap2conn"; memory-region = <&wmcpu_emi>; }; diff --git a/dts/Bindings/net/wireless/microchip,wilc1000.yaml b/dts/Bindings/net/wireless/microchip,wilc1000.yaml index 60de78f1bc..2460ccc082 100644 --- a/dts/Bindings/net/wireless/microchip,wilc1000.yaml +++ b/dts/Bindings/net/wireless/microchip,wilc1000.yaml @@ -4,7 +4,7 @@ $id: http://devicetree.org/schemas/net/wireless/microchip,wilc1000.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# -title: Microchip WILC wireless devicetree bindings +title: Microchip WILC wireless maintainers: - Adham Abozaeid <adham.abozaeid@microchip.com> @@ -20,8 +20,6 @@ properties: reg: true - spi-max-frequency: true - interrupts: maxItems: 1 @@ -51,7 +49,10 @@ required: - compatible - interrupts -additionalProperties: false +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false examples: - | diff --git a/dts/Bindings/net/wireless/qca,ath9k.yaml b/dts/Bindings/net/wireless/qca,ath9k.yaml index 8cd0adbf70..0e5412cff2 100644 --- a/dts/Bindings/net/wireless/qca,ath9k.yaml +++ b/dts/Bindings/net/wireless/qca,ath9k.yaml @@ -4,10 +4,10 @@ $id: http://devicetree.org/schemas/net/wireless/qca,ath9k.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# -title: Qualcomm Atheros ath9k wireless devices Generic Binding +title: Qualcomm Atheros ath9k wireless devices maintainers: - - Kalle Valo <kvalo@codeaurora.org> + - Toke Høiland-Jørgensen <toke@toke.dk> description: | This node provides properties for configuring the ath9k wireless device. diff --git a/dts/Bindings/net/wireless/qcom,ath10k.txt b/dts/Bindings/net/wireless/qcom,ath10k.txt deleted file mode 100644 index b61c2d5a0f..0000000000 --- a/dts/Bindings/net/wireless/qcom,ath10k.txt +++ /dev/null @@ -1,215 +0,0 @@ -* Qualcomm Atheros ath10k wireless devices - -Required properties: -- compatible: Should be one of the following: - * "qcom,ath10k" - * "qcom,ipq4019-wifi" - * "qcom,wcn3990-wifi" - -PCI based devices uses compatible string "qcom,ath10k" and takes calibration -data along with board specific data via "qcom,ath10k-calibration-data". -Rest of the properties are not applicable for PCI based devices. - -AHB based devices (i.e. ipq4019) uses compatible string "qcom,ipq4019-wifi" -and also uses most of the properties defined in this doc (except -"qcom,ath10k-calibration-data"). It uses "qcom,ath10k-pre-calibration-data" -to carry pre calibration data. - -In general, entry "qcom,ath10k-pre-calibration-data" and -"qcom,ath10k-calibration-data" conflict with each other and only one -can be provided per device. - -SNOC based devices (i.e. wcn3990) uses compatible string "qcom,wcn3990-wifi". - -- reg: Address and length of the register set for the device. -- reg-names: Must include the list of following reg names, - "membase" -- interrupts: reference to the list of 17 interrupt numbers for "qcom,ipq4019-wifi" - compatible target. - reference to the list of 12 interrupt numbers for "qcom,wcn3990-wifi" - compatible target. - Must contain interrupt-names property per entry for - "qcom,ath10k", "qcom,ipq4019-wifi" compatible targets. - -- interrupt-names: Must include the entries for MSI interrupt - names ("msi0" to "msi15") and legacy interrupt - name ("legacy") for "qcom,ath10k", "qcom,ipq4019-wifi" - compatible targets. - -Optional properties: -- resets: Must contain an entry for each entry in reset-names. - See ../reset/reseti.txt for details. -- reset-names: Must include the list of following reset names, - "wifi_cpu_init" - "wifi_radio_srif" - "wifi_radio_warm" - "wifi_radio_cold" - "wifi_core_warm" - "wifi_core_cold" -- clocks: List of clock specifiers, must contain an entry for each required - entry in clock-names. -- clock-names: Should contain the clock names "wifi_wcss_cmd", "wifi_wcss_ref", - "wifi_wcss_rtc" for "qcom,ipq4019-wifi" compatible target and - "cxo_ref_clk_pin" and optionally "qdss" for "qcom,wcn3990-wifi" - compatible target. -- qcom,msi_addr: MSI interrupt address. -- qcom,msi_base: Base value to add before writing MSI data into - MSI address register. -- qcom,ath10k-calibration-variant: string to search for in the board-2.bin - variant list with the same bus and device - specific ids -- qcom,ath10k-calibration-data : calibration data + board specific data - as an array, the length can vary between - hw versions. -- qcom,ath10k-pre-calibration-data : pre calibration data as an array, - the length can vary between hw versions. -- <supply-name>-supply: handle to the regulator device tree node - optional "supply-name" are "vdd-0.8-cx-mx", - "vdd-1.8-xo", "vdd-1.3-rfa", "vdd-3.3-ch0", - and "vdd-3.3-ch1". -- memory-region: - Usage: optional - Value type: <phandle> - Definition: reference to the reserved-memory for the msa region - used by the wifi firmware running in Q6. -- iommus: - Usage: optional - Value type: <prop-encoded-array> - Definition: A list of phandle and IOMMU specifier pairs. -- ext-fem-name: - Usage: Optional - Value type: string - Definition: Name of external front end module used. Some valid FEM names - for example: "microsemi-lx5586", "sky85703-11" - and "sky85803" etc. -- qcom,snoc-host-cap-8bit-quirk: - Usage: Optional - Value type: <empty> - Definition: Quirk specifying that the firmware expects the 8bit version - of the host capability QMI request -- qcom,xo-cal-data: xo cal offset to be configured in xo trim register. - -- qcom,msa-fixed-perm: Boolean context flag to disable SCM call for statically - mapped msa region. - -- qcom,coexist-support : should contain eithr "0" or "1" to indicate coex - support by the hardware. -- qcom,coexist-gpio-pin : gpio pin number information to support coex - which will be used by wifi firmware. - -* Subnodes -The ath10k wifi node can contain one optional firmware subnode. -Firmware subnode is needed when the platform does not have TustZone. -The firmware subnode must have: - -- iommus: - Usage: required - Value type: <prop-encoded-array> - Definition: A list of phandle and IOMMU specifier pairs. - - -Example (to supply PCI based wifi block details): - -In this example, the node is defined as child node of the PCI controller. - -pci { - pcie@0 { - reg = <0 0 0 0 0>; - #interrupt-cells = <1>; - #size-cells = <2>; - #address-cells = <3>; - device_type = "pci"; - - wifi@0,0 { - reg = <0 0 0 0 0>; - qcom,ath10k-calibration-data = [ 01 02 03 ... ]; - ext-fem-name = "microsemi-lx5586"; - }; - }; -}; - -Example (to supply ipq4019 SoC wifi block details): - -wifi0: wifi@a000000 { - compatible = "qcom,ipq4019-wifi"; - reg = <0xa000000 0x200000>; - resets = <&gcc WIFI0_CPU_INIT_RESET>, - <&gcc WIFI0_RADIO_SRIF_RESET>, - <&gcc WIFI0_RADIO_WARM_RESET>, - <&gcc WIFI0_RADIO_COLD_RESET>, - <&gcc WIFI0_CORE_WARM_RESET>, - <&gcc WIFI0_CORE_COLD_RESET>; - reset-names = "wifi_cpu_init", - "wifi_radio_srif", - "wifi_radio_warm", - "wifi_radio_cold", - "wifi_core_warm", - "wifi_core_cold"; - clocks = <&gcc GCC_WCSS2G_CLK>, - <&gcc GCC_WCSS2G_REF_CLK>, - <&gcc GCC_WCSS2G_RTC_CLK>; - clock-names = "wifi_wcss_cmd", - "wifi_wcss_ref", - "wifi_wcss_rtc"; - interrupts = <0 0x20 0x1>, - <0 0x21 0x1>, - <0 0x22 0x1>, - <0 0x23 0x1>, - <0 0x24 0x1>, - <0 0x25 0x1>, - <0 0x26 0x1>, - <0 0x27 0x1>, - <0 0x28 0x1>, - <0 0x29 0x1>, - <0 0x2a 0x1>, - <0 0x2b 0x1>, - <0 0x2c 0x1>, - <0 0x2d 0x1>, - <0 0x2e 0x1>, - <0 0x2f 0x1>, - <0 0xa8 0x0>; - interrupt-names = "msi0", "msi1", "msi2", "msi3", - "msi4", "msi5", "msi6", "msi7", - "msi8", "msi9", "msi10", "msi11", - "msi12", "msi13", "msi14", "msi15", - "legacy"; - qcom,msi_addr = <0x0b006040>; - qcom,msi_base = <0x40>; - qcom,ath10k-pre-calibration-data = [ 01 02 03 ... ]; - qcom,coexist-support = <1>; - qcom,coexist-gpio-pin = <0x33>; -}; - -Example (to supply wcn3990 SoC wifi block details): - -wifi@18000000 { - compatible = "qcom,wcn3990-wifi"; - reg = <0x18800000 0x800000>; - reg-names = "membase"; - clocks = <&clock_gcc clk_rf_clk2_pin>; - clock-names = "cxo_ref_clk_pin"; - interrupts = - <GIC_SPI 414 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 415 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 416 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 417 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 419 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 420 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 423 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH>; - vdd-0.8-cx-mx-supply = <&pm8998_l5>; - vdd-1.8-xo-supply = <&vreg_l7a_1p8>; - vdd-1.3-rfa-supply = <&vreg_l17a_1p3>; - vdd-3.3-ch0-supply = <&vreg_l25a_3p3>; - vdd-3.3-ch1-supply = <&vreg_l26a_3p3>; - memory-region = <&wifi_msa_mem>; - iommus = <&apps_smmu 0x0040 0x1>; - qcom,msa-fixed-perm; - wifi-firmware { - iommus = <&apps_iommu 0xc22 0x1>; - }; -}; diff --git a/dts/Bindings/net/wireless/qcom,ath10k.yaml b/dts/Bindings/net/wireless/qcom,ath10k.yaml new file mode 100644 index 0000000000..7758a55dd3 --- /dev/null +++ b/dts/Bindings/net/wireless/qcom,ath10k.yaml @@ -0,0 +1,362 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/wireless/qcom,ath10k.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Technologies ath10k wireless devices + +maintainers: + - Kalle Valo <kvalo@kernel.org> + +description: + Qualcomm Technologies, Inc. IEEE 802.11ac devices. + +properties: + compatible: + enum: + - qcom,ath10k # SDIO-based devices + - qcom,ipq4019-wifi + - qcom,wcn3990-wifi # SNoC-based devices + + reg: + maxItems: 1 + + reg-names: + items: + - const: membase + + interrupts: + minItems: 12 + maxItems: 17 + + interrupt-names: + minItems: 12 + maxItems: 17 + + memory-region: + maxItems: 1 + description: + Reference to the MSA memory region used by the Wi-Fi firmware + running on the Q6 core. + + iommus: + minItems: 1 + maxItems: 2 + + clocks: + minItems: 1 + maxItems: 3 + + clock-names: + minItems: 1 + maxItems: 3 + + resets: + maxItems: 6 + + reset-names: + items: + - const: wifi_cpu_init + - const: wifi_radio_srif + - const: wifi_radio_warm + - const: wifi_radio_cold + - const: wifi_core_warm + - const: wifi_core_cold + + ext-fem-name: + $ref: /schemas/types.yaml#/definitions/string + description: Name of external front end module used. + enum: + - microsemi-lx5586 + - sky85703-11 + - sky85803 + + wifi-firmware: + type: object + additionalProperties: false + description: | + The ath10k Wi-Fi node can contain one optional firmware subnode. + Firmware subnode is needed when the platform does not have Trustzone. + properties: + iommus: + maxItems: 1 + required: + - iommus + + ieee80211-freq-limit: true + + qcom,ath10k-calibration-data: + $ref: /schemas/types.yaml#/definitions/uint8-array + description: + Calibration data + board-specific data as a byte array. The length + can vary between hardware versions. + + qcom,ath10k-calibration-variant: + $ref: /schemas/types.yaml#/definitions/string + description: + Unique variant identifier of the calibration data in board-2.bin + for designs with colliding bus and device specific ids + + qcom,ath10k-pre-calibration-data: + $ref: /schemas/types.yaml#/definitions/uint8-array + description: + Pre-calibration data as a byte array. The length can vary between + hardware versions. + + qcom,coexist-support: + $ref: /schemas/types.yaml#/definitions/uint8 + enum: [0, 1] + description: + Indicate coex support by the hardware. + + qcom,coexist-gpio-pin: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + COEX GPIO number provided to the Wi-Fi firmware. + + qcom,msa-fixed-perm: + type: boolean + description: + Whether to skip executing an SCM call that reassigns the memory + region ownership. + + qcom,smem-states: + $ref: /schemas/types.yaml#/definitions/phandle-array + description: State bits used by the AP to signal the WLAN Q6. + items: + - description: Signal bits used to enable/disable low power mode + on WCN in the case of WoW (Wake on Wireless). + + qcom,smem-state-names: + description: The names of the state bits used for SMP2P output. + items: + - const: wlan-smp2p-out + + qcom,snoc-host-cap-8bit-quirk: + type: boolean + description: + Quirk specifying that the firmware expects the 8bit version + of the host capability QMI request + + qcom,xo-cal-data: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + XO cal offset to be configured in XO trim register. + + vdd-0.8-cx-mx-supply: + description: Main logic power rail + + vdd-1.8-xo-supply: + description: Crystal oscillator supply + + vdd-1.3-rfa-supply: + description: RFA supply + + vdd-3.3-ch0-supply: + description: Primary Wi-Fi antenna supply + + vdd-3.3-ch1-supply: + description: Secondary Wi-Fi antenna supply + +required: + - compatible + - reg + +additionalProperties: false + +allOf: + - $ref: ieee80211.yaml# + - if: + properties: + compatible: + contains: + enum: + - qcom,ipq4019-wifi + then: + properties: + interrupts: + minItems: 17 + maxItems: 17 + + interrupt-names: + items: + - const: msi0 + - const: msi1 + - const: msi2 + - const: msi3 + - const: msi4 + - const: msi5 + - const: msi6 + - const: msi7 + - const: msi8 + - const: msi9 + - const: msi10 + - const: msi11 + - const: msi12 + - const: msi13 + - const: msi14 + - const: msi15 + - const: legacy + + clocks: + items: + - description: Wi-Fi command clock + - description: Wi-Fi reference clock + - description: Wi-Fi RTC clock + + clock-names: + items: + - const: wifi_wcss_cmd + - const: wifi_wcss_ref + - const: wifi_wcss_rtc + + required: + - clocks + - clock-names + - interrupts + - interrupt-names + - resets + - reset-names + + - if: + properties: + compatible: + contains: + enum: + - qcom,wcn3990-wifi + + then: + properties: + clocks: + minItems: 1 + items: + - description: XO reference clock + - description: Qualcomm Debug Subsystem clock + + clock-names: + minItems: 1 + items: + - const: cxo_ref_clk_pin + - const: qdss + + interrupts: + items: + - description: CE0 + - description: CE1 + - description: CE2 + - description: CE3 + - description: CE4 + - description: CE5 + - description: CE6 + - description: CE7 + - description: CE8 + - description: CE9 + - description: CE10 + - description: CE11 + + interrupt-names: false + + required: + - interrupts + +examples: + # SNoC + - | + #include <dt-bindings/clock/qcom,rpmcc.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + + wifi@18800000 { + compatible = "qcom,wcn3990-wifi"; + reg = <0x18800000 0x800000>; + reg-names = "membase"; + memory-region = <&wlan_msa_mem>; + clocks = <&rpmcc RPM_SMD_RF_CLK2_PIN>; + clock-names = "cxo_ref_clk_pin"; + interrupts = <GIC_SPI 413 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 414 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 415 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 416 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 417 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 420 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 423 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH>; + iommus = <&anoc2_smmu 0x1900>, + <&anoc2_smmu 0x1901>; + qcom,snoc-host-cap-8bit-quirk; + vdd-0.8-cx-mx-supply = <&vreg_l5a_0p8>; + vdd-1.8-xo-supply = <&vreg_l7a_1p8>; + vdd-1.3-rfa-supply = <&vreg_l17a_1p3>; + vdd-3.3-ch0-supply = <&vreg_l25a_3p3>; + vdd-3.3-ch1-supply = <&vreg_l23a_3p3>; + + wifi-firmware { + iommus = <&apps_smmu 0x1c02 0x1>; + }; + }; + + # AHB + - | + #include <dt-bindings/clock/qcom,gcc-ipq4019.h> + + wifi@a000000 { + compatible = "qcom,ipq4019-wifi"; + reg = <0xa000000 0x200000>; + resets = <&gcc WIFI0_CPU_INIT_RESET>, + <&gcc WIFI0_RADIO_SRIF_RESET>, + <&gcc WIFI0_RADIO_WARM_RESET>, + <&gcc WIFI0_RADIO_COLD_RESET>, + <&gcc WIFI0_CORE_WARM_RESET>, + <&gcc WIFI0_CORE_COLD_RESET>; + reset-names = "wifi_cpu_init", + "wifi_radio_srif", + "wifi_radio_warm", + "wifi_radio_cold", + "wifi_core_warm", + "wifi_core_cold"; + clocks = <&gcc GCC_WCSS2G_CLK>, + <&gcc GCC_WCSS2G_REF_CLK>, + <&gcc GCC_WCSS2G_RTC_CLK>; + clock-names = "wifi_wcss_cmd", + "wifi_wcss_ref", + "wifi_wcss_rtc"; + interrupts = <GIC_SPI 32 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 33 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 34 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 35 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 36 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 37 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 38 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 39 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 40 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 41 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 42 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 43 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 44 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 45 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 46 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 47 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "msi0", + "msi1", + "msi2", + "msi3", + "msi4", + "msi5", + "msi6", + "msi7", + "msi8", + "msi9", + "msi10", + "msi11", + "msi12", + "msi13", + "msi14", + "msi15", + "legacy"; + ieee80211-freq-limit = <5470000 5875000>; + }; diff --git a/dts/Bindings/net/wireless/qcom,ath11k-pci.yaml b/dts/Bindings/net/wireless/qcom,ath11k-pci.yaml new file mode 100644 index 0000000000..817f02a8b4 --- /dev/null +++ b/dts/Bindings/net/wireless/qcom,ath11k-pci.yaml @@ -0,0 +1,58 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +# Copyright (c) 2023 Linaro Limited +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/wireless/qcom,ath11k-pci.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Technologies ath11k wireless devices (PCIe) + +maintainers: + - Kalle Valo <kvalo@kernel.org> + +description: | + Qualcomm Technologies IEEE 802.11ax PCIe devices + +properties: + compatible: + enum: + - pci17cb,1103 # WCN6855 + + reg: + maxItems: 1 + + qcom,ath11k-calibration-variant: + $ref: /schemas/types.yaml#/definitions/string + description: | + string to uniquely identify variant of the calibration data for designs + with colliding bus and device ids + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + pcie { + #address-cells = <3>; + #size-cells = <2>; + + pcie@0 { + device_type = "pci"; + reg = <0x0 0x0 0x0 0x0 0x0>; + #address-cells = <3>; + #size-cells = <2>; + ranges; + + bus-range = <0x01 0xff>; + + wifi@0 { + compatible = "pci17cb,1103"; + reg = <0x10000 0x0 0x0 0x0 0x0>; + + qcom,ath11k-calibration-variant = "LE_X13S"; + }; + }; + }; diff --git a/dts/Bindings/net/wireless/qcom,ath11k.yaml b/dts/Bindings/net/wireless/qcom,ath11k.yaml index 8c01fdba13..7d5f982a3d 100644 --- a/dts/Bindings/net/wireless/qcom,ath11k.yaml +++ b/dts/Bindings/net/wireless/qcom,ath11k.yaml @@ -1,15 +1,14 @@ # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) # Copyright (c) 2018-2019 The Linux Foundation. All rights reserved. - %YAML 1.2 --- $id: http://devicetree.org/schemas/net/wireless/qcom,ath11k.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# -title: Qualcomm Technologies ath11k wireless devices Generic Binding +title: Qualcomm Technologies ath11k wireless devices maintainers: - - Kalle Valo <kvalo@codeaurora.org> + - Kalle Valo <kvalo@kernel.org> description: | These are dt entries for Qualcomm Technologies, Inc. IEEE 802.11ax @@ -21,6 +20,7 @@ properties: - qcom,ipq8074-wifi - qcom,ipq6018-wifi - qcom,wcn6750-wifi + - qcom,ipq5018-wifi reg: maxItems: 1 @@ -66,6 +66,18 @@ properties: required: - iommus + qcom,smem-states: + $ref: /schemas/types.yaml#/definitions/phandle-array + description: State bits used by the AP to signal the WLAN Q6. + items: + - description: Signal bits used to enable/disable low power mode + on WCN6750 in the case of WoW (Wake on Wireless). + + qcom,smem-state-names: + description: The names of the state bits used for SMP2P output. + items: + - const: wlan-smp2p-out + required: - compatible - reg @@ -250,10 +262,10 @@ allOf: examples: - | - q6v5_wcss: q6v5_wcss@CD00000 { + q6v5_wcss: remoteproc@cd00000 { compatible = "qcom,ipq8074-wcss-pil"; - reg = <0xCD00000 0x4040>, - <0x4AB000 0x20>; + reg = <0xcd00000 0x4040>, + <0x4ab000 0x20>; reg-names = "qdsp6", "rmb"; }; @@ -374,7 +386,7 @@ examples: #address-cells = <2>; #size-cells = <2>; - qcn9074_0: qcn9074_0@51100000 { + qcn9074_0: wifi@51100000 { no-map; reg = <0x0 0x51100000 0x0 0x03500000>; }; @@ -448,7 +460,9 @@ examples: <GIC_SPI 799 IRQ_TYPE_EDGE_RISING>; qcom,rproc = <&remoteproc_wpss>; memory-region = <&wlan_fw_mem>, <&wlan_ce_mem>; + qcom,smem-states = <&wlan_smp2p_out 0>; + qcom,smem-state-names = "wlan-smp2p-out"; wifi-firmware { - iommus = <&apps_smmu 0x1c02 0x1>; + iommus = <&apps_smmu 0x1c02 0x1>; }; }; diff --git a/dts/Bindings/net/wireless/silabs,wfx.yaml b/dts/Bindings/net/wireless/silabs,wfx.yaml index 76199a67d6..84e5659e50 100644 --- a/dts/Bindings/net/wireless/silabs,wfx.yaml +++ b/dts/Bindings/net/wireless/silabs,wfx.yaml @@ -2,11 +2,10 @@ # Copyright (c) 2020, Silicon Laboratories, Inc. %YAML 1.2 --- - $id: http://devicetree.org/schemas/net/wireless/silabs,wfx.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# -title: Silicon Labs WFxxx devicetree bindings +title: Silicon Labs WFxxx maintainers: - Jérôme Pouiller <jerome.pouiller@silabs.com> @@ -29,12 +28,6 @@ description: > Documentation/devicetree/bindings/mmc/mmc-pwrseq-simple.yaml for more information. - For SPI: - - In add of the properties below, please consult - Documentation/devicetree/bindings/spi/spi-controller.yaml for optional SPI - related properties. - properties: compatible: items: @@ -52,8 +45,6 @@ properties: bindings. maxItems: 1 - spi-max-frequency: true - interrupts: description: The interrupt line. Should be IRQ_TYPE_EDGE_RISING. When SPI is used, this property is required. When SDIO is used, the "in-band" @@ -84,12 +75,15 @@ properties: mac-address: true -additionalProperties: false - required: - compatible - reg +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false + examples: - | #include <dt-bindings/gpio/gpio.h> diff --git a/dts/Bindings/net/wireless/ti,wlcore.yaml b/dts/Bindings/net/wireless/ti,wlcore.yaml index d68bb2ec1f..75c9489f31 100644 --- a/dts/Bindings/net/wireless/ti,wlcore.yaml +++ b/dts/Bindings/net/wireless/ti,wlcore.yaml @@ -36,8 +36,6 @@ properties: This is required when connected via SPI, and optional when connected via SDIO. - spi-max-frequency: true - interrupts: minItems: 1 maxItems: 2 @@ -69,68 +67,76 @@ required: - compatible - interrupts -if: - properties: - compatible: - contains: - enum: - - ti,wl1271 - - ti,wl1273 - - ti,wl1281 - - ti,wl1283 -then: - required: - - ref-clock-frequency - -additionalProperties: false +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + - if: + properties: + compatible: + contains: + enum: + - ti,wl1271 + - ti,wl1273 + - ti,wl1281 + - ti,wl1283 + then: + required: + - ref-clock-frequency + +unevaluatedProperties: false examples: - | #include <dt-bindings/interrupt-controller/irq.h> // For wl12xx family: - spi1 { - #address-cells = <1>; - #size-cells = <0>; - - wlcore1: wlcore@1 { - compatible = "ti,wl1271"; - reg = <1>; - spi-max-frequency = <48000000>; - interrupts = <8 IRQ_TYPE_LEVEL_HIGH>; - vwlan-supply = <&vwlan_fixed>; - clock-xtal; - ref-clock-frequency = <38400000>; - }; + spi { + #address-cells = <1>; + #size-cells = <0>; + + wlcore1: wlcore@1 { + compatible = "ti,wl1271"; + reg = <1>; + spi-max-frequency = <48000000>; + interrupts = <8 IRQ_TYPE_LEVEL_HIGH>; + vwlan-supply = <&vwlan_fixed>; + clock-xtal; + ref-clock-frequency = <38400000>; + }; }; + - | + #include <dt-bindings/interrupt-controller/irq.h> + // For wl18xx family: - spi2 { - #address-cells = <1>; - #size-cells = <0>; - - wlcore2: wlcore@0 { - compatible = "ti,wl1835"; - reg = <0>; - spi-max-frequency = <48000000>; - interrupts = <27 IRQ_TYPE_EDGE_RISING>; - vwlan-supply = <&vwlan_fixed>; - }; + spi { + #address-cells = <1>; + #size-cells = <0>; + + wlcore2: wlcore@0 { + compatible = "ti,wl1835"; + reg = <0>; + spi-max-frequency = <48000000>; + interrupts = <27 IRQ_TYPE_EDGE_RISING>; + vwlan-supply = <&vwlan_fixed>; + }; }; + - | + #include <dt-bindings/interrupt-controller/irq.h> + // SDIO example: mmc3 { - vmmc-supply = <&wlan_en_reg>; - bus-width = <4>; - cap-power-off-card; - keep-power-in-suspend; - - #address-cells = <1>; - #size-cells = <0>; - - wlcore3: wlcore@2 { - compatible = "ti,wl1835"; - reg = <2>; - interrupts = <19 IRQ_TYPE_LEVEL_HIGH>; - }; + vmmc-supply = <&wlan_en_reg>; + bus-width = <4>; + cap-power-off-card; + keep-power-in-suspend; + + #address-cells = <1>; + #size-cells = <0>; + + wlcore3: wlcore@2 { + compatible = "ti,wl1835"; + reg = <2>; + interrupts = <19 IRQ_TYPE_LEVEL_HIGH>; + }; }; |