diff options
Diffstat (limited to 'dts/Bindings/pci')
83 files changed, 7751 insertions, 2225 deletions
diff --git a/dts/Bindings/pci/amlogic,axg-pcie.yaml b/dts/Bindings/pci/amlogic,axg-pcie.yaml new file mode 100644 index 0000000000..a5bd90bc07 --- /dev/null +++ b/dts/Bindings/pci/amlogic,axg-pcie.yaml @@ -0,0 +1,134 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pci/amlogic,axg-pcie.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Amlogic Meson AXG DWC PCIe SoC controller + +maintainers: + - Neil Armstrong <neil.armstrong@linaro.org> + +description: + Amlogic Meson PCIe host controller is based on the Synopsys DesignWare PCI core. + +allOf: + - $ref: /schemas/pci/pci-bus.yaml# + - $ref: /schemas/pci/snps,dw-pcie-common.yaml# + +# We need a select here so we don't match all nodes with 'snps,dw-pcie' +select: + properties: + compatible: + enum: + - amlogic,axg-pcie + - amlogic,g12a-pcie + required: + - compatible + +properties: + compatible: + items: + - enum: + - amlogic,axg-pcie + - amlogic,g12a-pcie + - const: snps,dw-pcie + + reg: + items: + - description: External local bus interface registers + - description: Meson designed configuration registers + - description: PCIe configuration space + + reg-names: + items: + - const: elbi + - const: cfg + - const: config + + interrupts: + maxItems: 1 + + clocks: + items: + - description: PCIe GEN 100M PLL clock + - description: PCIe RC clock gate + - description: PCIe PHY clock + + clock-names: + items: + - const: pclk + - const: port + - const: general + + phys: + maxItems: 1 + + phy-names: + const: pcie + + resets: + items: + - description: Port Reset + - description: Shared APB reset + + reset-names: + items: + - const: port + - const: apb + + num-lanes: + const: 1 + + power-domains: + maxItems: 1 + +required: + - compatible + - reg + - reg-names + - interrupts + - clock + - clock-names + - "#address-cells" + - "#size-cells" + - "#interrupt-cells" + - interrupt-map + - interrupt-map-mask + - ranges + - bus-range + - device_type + - num-lanes + - phys + - phy-names + - resets + - reset-names + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + pcie: pcie@f9800000 { + compatible = "amlogic,axg-pcie", "snps,dw-pcie"; + reg = <0xf9800000 0x400000>, <0xff646000 0x2000>, <0xf9f00000 0x100000>; + reg-names = "elbi", "cfg", "config"; + interrupts = <GIC_SPI 177 IRQ_TYPE_EDGE_RISING>; + clocks = <&pclk>, <&clk_port>, <&clk_phy>; + clock-names = "pclk", "port", "general"; + resets = <&reset_pcie_port>, <&reset_pcie_apb>; + reset-names = "port", "apb"; + phys = <&pcie_phy>; + phy-names = "pcie"; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &gic GIC_SPI 179 IRQ_TYPE_EDGE_RISING>; + bus-range = <0x0 0xff>; + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + num-lanes = <1>; + ranges = <0x82000000 0 0 0xf9c00000 0 0x00300000>; + }; +... diff --git a/dts/Bindings/pci/amlogic,meson-pcie.txt b/dts/Bindings/pci/amlogic,meson-pcie.txt deleted file mode 100644 index b6acbe694f..0000000000 --- a/dts/Bindings/pci/amlogic,meson-pcie.txt +++ /dev/null @@ -1,70 +0,0 @@ -Amlogic Meson AXG DWC PCIE SoC controller - -Amlogic Meson PCIe host controller is based on the Synopsys DesignWare PCI core. -It shares common functions with the PCIe DesignWare core driver and -inherits common properties defined in -Documentation/devicetree/bindings/pci/designware-pcie.txt. - -Additional properties are described here: - -Required properties: -- compatible: - should contain : - - "amlogic,axg-pcie" for AXG SoC Family - - "amlogic,g12a-pcie" for G12A SoC Family - to identify the core. -- reg: - should contain the configuration address space. -- reg-names: Must be - - "elbi" External local bus interface registers - - "cfg" Meson specific registers - - "config" PCIe configuration space -- reset-gpios: The GPIO to generate PCIe PERST# assert and deassert signal. -- clocks: Must contain an entry for each entry in clock-names. -- clock-names: Must include the following entries: - - "pclk" PCIe GEN 100M PLL clock - - "port" PCIe_x(A or B) RC clock gate - - "general" PCIe Phy clock -- resets: phandle to the reset lines. -- reset-names: must contain "port" and "apb" - - "port" Port A or B reset - - "apb" Share APB reset -- phys: should contain a phandle to the PCIE phy -- phy-names: must contain "pcie" - -- device_type: - should be "pci". As specified in designware-pcie.txt - - -Example configuration: - - pcie: pcie@f9800000 { - compatible = "amlogic,axg-pcie", "snps,dw-pcie"; - reg = <0x0 0xf9800000 0x0 0x400000 - 0x0 0xff646000 0x0 0x2000 - 0x0 0xf9f00000 0x0 0x100000>; - reg-names = "elbi", "cfg", "config"; - reset-gpios = <&gpio GPIOX_19 GPIO_ACTIVE_HIGH>; - interrupts = <GIC_SPI 177 IRQ_TYPE_EDGE_RISING>; - #interrupt-cells = <1>; - interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &gic GIC_SPI 179 IRQ_TYPE_EDGE_RISING>; - bus-range = <0x0 0xff>; - #address-cells = <3>; - #size-cells = <2>; - device_type = "pci"; - ranges = <0x82000000 0 0 0x0 0xf9c00000 0 0x00300000>; - - clocks = <&clkc CLKID_USB - &clkc CLKID_PCIE_A - &clkc CLKID_PCIE_CML_EN0>; - clock-names = "general", - "pclk", - "port"; - resets = <&reset RESET_PCIE_A>, - <&reset RESET_PCIE_APB>; - reset-names = "port", - "apb"; - phys = <&pcie_phy>; - phy-names = "pcie"; - }; diff --git a/dts/Bindings/pci/apple,pcie.yaml b/dts/Bindings/pci/apple,pcie.yaml new file mode 100644 index 0000000000..215ff9a9c8 --- /dev/null +++ b/dts/Bindings/pci/apple,pcie.yaml @@ -0,0 +1,175 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pci/apple,pcie.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Apple PCIe host controller + +maintainers: + - Mark Kettenis <kettenis@openbsd.org> + +description: | + The Apple PCIe host controller is a PCIe host controller with + multiple root ports present in Apple ARM SoC platforms, including + various iPhone and iPad devices and the "Apple Silicon" Macs. + The controller incorporates Synopsys DesigWare PCIe logic to + implements its root ports. But the ATU found on most DesignWare + PCIe host bridges is absent. + + All root ports share a single ECAM space, but separate GPIOs are + used to take the PCI devices on those ports out of reset. Therefore + the standard "reset-gpios" and "max-link-speed" properties appear on + the child nodes that represent the PCI bridges that correspond to + the individual root ports. + + MSIs are handled by the PCIe controller and translated into regular + interrupts. A range of 32 MSIs is provided. These 32 MSIs can be + distributed over the root ports as the OS sees fit by programming + the PCIe controller's port registers. + +properties: + compatible: + items: + - enum: + - apple,t8103-pcie + - apple,t8112-pcie + - apple,t6000-pcie + - const: apple,pcie + + reg: + minItems: 3 + maxItems: 6 + + reg-names: + minItems: 3 + items: + - const: config + - const: rc + - const: port0 + - const: port1 + - const: port2 + - const: port3 + + ranges: + minItems: 2 + maxItems: 2 + + interrupts: + description: + Interrupt specifiers, one for each root port. + minItems: 1 + maxItems: 4 + + msi-parent: true + + msi-ranges: + maxItems: 1 + + iommu-map: true + iommu-map-mask: true + + power-domains: + maxItems: 1 + +required: + - compatible + - reg + - reg-names + - bus-range + - interrupts + - msi-controller + - msi-parent + - msi-ranges + +unevaluatedProperties: false + +allOf: + - $ref: /schemas/pci/pci-bus.yaml# + - $ref: /schemas/interrupt-controller/msi-controller.yaml# + - if: + properties: + compatible: + contains: + const: apple,t8103-pcie + then: + properties: + reg: + maxItems: 5 + interrupts: + maxItems: 3 + +examples: + - | + #include <dt-bindings/interrupt-controller/apple-aic.h> + + soc { + #address-cells = <2>; + #size-cells = <2>; + + pcie0: pcie@690000000 { + compatible = "apple,t8103-pcie", "apple,pcie"; + device_type = "pci"; + + reg = <0x6 0x90000000 0x0 0x1000000>, + <0x6 0x80000000 0x0 0x100000>, + <0x6 0x81000000 0x0 0x4000>, + <0x6 0x82000000 0x0 0x4000>, + <0x6 0x83000000 0x0 0x4000>; + reg-names = "config", "rc", "port0", "port1", "port2"; + + interrupt-parent = <&aic>; + interrupts = <AIC_IRQ 695 IRQ_TYPE_LEVEL_HIGH>, + <AIC_IRQ 698 IRQ_TYPE_LEVEL_HIGH>, + <AIC_IRQ 701 IRQ_TYPE_LEVEL_HIGH>; + + msi-controller; + msi-parent = <&pcie0>; + msi-ranges = <&aic AIC_IRQ 704 IRQ_TYPE_EDGE_RISING 32>; + + iommu-map = <0x100 &dart0 1 1>, + <0x200 &dart1 1 1>, + <0x300 &dart2 1 1>; + iommu-map-mask = <0xff00>; + + bus-range = <0 3>; + #address-cells = <3>; + #size-cells = <2>; + ranges = <0x43000000 0x6 0xa0000000 0x6 0xa0000000 0x0 0x20000000>, + <0x02000000 0x0 0xc0000000 0x6 0xc0000000 0x0 0x40000000>; + + power-domains = <&ps_apcie_gp>; + pinctrl-0 = <&pcie_pins>; + pinctrl-names = "default"; + + pci@0,0 { + device_type = "pci"; + reg = <0x0 0x0 0x0 0x0 0x0>; + reset-gpios = <&pinctrl_ap 152 0>; + + #address-cells = <3>; + #size-cells = <2>; + ranges; + }; + + pci@1,0 { + device_type = "pci"; + reg = <0x800 0x0 0x0 0x0 0x0>; + reset-gpios = <&pinctrl_ap 153 0>; + + #address-cells = <3>; + #size-cells = <2>; + ranges; + }; + + pci@2,0 { + device_type = "pci"; + reg = <0x1000 0x0 0x0 0x0 0x0>; + reset-gpios = <&pinctrl_ap 33 0>; + + #address-cells = <3>; + #size-cells = <2>; + ranges; + }; + }; + }; diff --git a/dts/Bindings/pci/axis,artpec6-pcie.txt b/dts/Bindings/pci/axis,artpec6-pcie.txt index 979dc7b6cf..cc6dcdb676 100644 --- a/dts/Bindings/pci/axis,artpec6-pcie.txt +++ b/dts/Bindings/pci/axis,artpec6-pcie.txt @@ -1,7 +1,7 @@ * Axis ARTPEC-6 PCIe interface This PCIe host controller is based on the Synopsys DesignWare PCIe IP -and thus inherits all the common properties defined in designware-pcie.txt. +and thus inherits all the common properties defined in snps,dw-pcie.yaml. Required properties: - compatible: "axis,artpec6-pcie", "snps,dw-pcie" for ARTPEC-6 in RC mode; diff --git a/dts/Bindings/pci/baikal,bt1-pcie.yaml b/dts/Bindings/pci/baikal,bt1-pcie.yaml new file mode 100644 index 0000000000..8eaa07ae97 --- /dev/null +++ b/dts/Bindings/pci/baikal,bt1-pcie.yaml @@ -0,0 +1,168 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pci/baikal,bt1-pcie.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Baikal-T1 PCIe Root Port Controller + +maintainers: + - Serge Semin <fancer.lancer@gmail.com> + +description: + Embedded into Baikal-T1 SoC Root Complex controller with a single port + activated. It's based on the DWC RC PCIe v4.60a IP-core, which is configured + to have just a single Root Port function and is capable of establishing the + link up to Gen.3 speed on x4 lanes. It doesn't have embedded clock and reset + control module, so the proper interface initialization is supposed to be + performed by software. There four in- and four outbound iATU regions + which can be used to emit all required TLP types on the PCIe bus. + +allOf: + - $ref: /schemas/pci/snps,dw-pcie.yaml# + +properties: + compatible: + const: baikal,bt1-pcie + + reg: + description: + DBI, DBI2 and at least 4KB outbound iATU-capable region for the + peripheral devices CFG-space access. + maxItems: 3 + + reg-names: + items: + - const: dbi + - const: dbi2 + - const: config + + interrupts: + description: + MSI, AER, PME, Hot-plug, Link Bandwidth Management, Link Equalization + request and eight Read/Write eDMA IRQ lines are available. + maxItems: 14 + + interrupt-names: + items: + - const: dma0 + - const: dma1 + - const: dma2 + - const: dma3 + - const: dma4 + - const: dma5 + - const: dma6 + - const: dma7 + - const: msi + - const: aer + - const: pme + - const: hp + - const: bw_mg + - const: l_eq + + clocks: + description: + DBI (attached to the APB bus), AXI-bus master and slave interfaces + are fed up by the dedicated application clocks. A common reference + clock signal is supposed to be attached to the corresponding Ref-pad + of the SoC. It will be redistributed amongst the controller core + sub-modules (pipe, core, aux, etc). + maxItems: 4 + + clock-names: + items: + - const: dbi + - const: mstr + - const: slv + - const: ref + + resets: + description: + A comprehensive controller reset logic is supposed to be implemented + by software, so almost all the possible application and core reset + signals are exposed via the system CCU module. + maxItems: 9 + + reset-names: + items: + - const: mstr + - const: slv + - const: pwr + - const: hot + - const: phy + - const: core + - const: pipe + - const: sticky + - const: non-sticky + + baikal,bt1-syscon: + $ref: /schemas/types.yaml#/definitions/phandle + description: + Phandle to the Baikal-T1 System Controller DT node. It's required to + access some additional PM, Reset-related and LTSSM signals. + + num-lanes: + maximum: 4 + + max-link-speed: + maximum: 3 + +required: + - compatible + - reg + - reg-names + - interrupts + - interrupt-names + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/mips-gic.h> + #include <dt-bindings/gpio/gpio.h> + + pcie@1f052000 { + compatible = "baikal,bt1-pcie"; + device_type = "pci"; + reg = <0x1f052000 0x1000>, <0x1f053000 0x1000>, <0x1bdbf000 0x1000>; + reg-names = "dbi", "dbi2", "config"; + #address-cells = <3>; + #size-cells = <2>; + ranges = <0x81000000 0 0x00000000 0x1bdb0000 0 0x00008000>, + <0x82000000 0 0x20000000 0x08000000 0 0x13db0000>; + bus-range = <0x0 0xff>; + + interrupts = <GIC_SHARED 80 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SHARED 81 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SHARED 82 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SHARED 83 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SHARED 84 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SHARED 85 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SHARED 86 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SHARED 87 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SHARED 88 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SHARED 89 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SHARED 90 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SHARED 91 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SHARED 92 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SHARED 93 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "dma0", "dma1", "dma2", "dma3", + "dma4", "dma5", "dma6", "dma7", + "msi", "aer", "pme", "hp", "bw_mg", + "l_eq"; + + clocks = <&ccu_sys 1>, <&ccu_axi 6>, <&ccu_axi 7>, <&clk_pcie>; + clock-names = "dbi", "mstr", "slv", "ref"; + + resets = <&ccu_axi 6>, <&ccu_axi 7>, <&ccu_sys 7>, <&ccu_sys 10>, + <&ccu_sys 4>, <&ccu_sys 6>, <&ccu_sys 5>, <&ccu_sys 8>, + <&ccu_sys 9>; + reset-names = "mstr", "slv", "pwr", "hot", "phy", "core", "pipe", + "sticky", "non-sticky"; + + reset-gpios = <&port0 0 GPIO_ACTIVE_LOW>; + + num-lanes = <4>; + max-link-speed = <3>; + }; +... diff --git a/dts/Bindings/pci/brcm,iproc-pcie.txt b/dts/Bindings/pci/brcm,iproc-pcie.txt deleted file mode 100644 index df065aa53a..0000000000 --- a/dts/Bindings/pci/brcm,iproc-pcie.txt +++ /dev/null @@ -1,133 +0,0 @@ -* Broadcom iProc PCIe controller with the platform bus interface - -Required properties: -- compatible: - "brcm,iproc-pcie" for the first generation of PAXB based controller, -used in SoCs including NSP, Cygnus, NS2, and Pegasus - "brcm,iproc-pcie-paxb-v2" for the second generation of PAXB-based -controllers, used in Stingray - "brcm,iproc-pcie-paxc" for the first generation of PAXC based -controller, used in NS2 - "brcm,iproc-pcie-paxc-v2" for the second generation of PAXC based -controller, used in Stingray - PAXB-based root complex is used for external endpoint devices. PAXC-based -root complex is connected to emulated endpoint devices internal to the ASIC -- reg: base address and length of the PCIe controller I/O register space -- #interrupt-cells: set to <1> -- interrupt-map-mask and interrupt-map, standard PCI properties to define the - mapping of the PCIe interface to interrupt numbers -- linux,pci-domain: PCI domain ID. Should be unique for each host controller -- bus-range: PCI bus numbers covered -- #address-cells: set to <3> -- #size-cells: set to <2> -- device_type: set to "pci" -- ranges: ranges for the PCI memory and I/O regions - -Optional properties: -- phys: phandle of the PCIe PHY device -- phy-names: must be "pcie-phy" -- dma-coherent: present if DMA operations are coherent -- dma-ranges: Some PAXB-based root complexes do not have inbound mapping done - by the ASIC after power on reset. In this case, SW is required to configure -the mapping, based on inbound memory regions specified by this property. - -- brcm,pcie-ob: Some iProc SoCs do not have the outbound address mapping done -by the ASIC after power on reset. In this case, SW needs to configure it - -If the brcm,pcie-ob property is present, the following properties become -effective: - -Required: -- brcm,pcie-ob-axi-offset: The offset from the AXI address to the internal -address used by the iProc PCIe core (not the PCIe address) - -MSI support (optional): - -For older platforms without MSI integrated in the GIC, iProc PCIe core provides -an event queue based MSI support. The iProc MSI uses host memories to store -MSI posted writes in the event queues - -On newer iProc platforms, gicv2m or gicv3-its based MSI support should be used - -- msi-map: Maps a Requester ID to an MSI controller and associated MSI -sideband data - -- msi-parent: Link to the device node of the MSI controller, used when no MSI -sideband data is passed between the iProc PCIe controller and the MSI -controller - -Refer to the following binding documents for more detailed description on -the use of 'msi-map' and 'msi-parent': - Documentation/devicetree/bindings/pci/pci-msi.txt - Documentation/devicetree/bindings/interrupt-controller/msi.txt - -When the iProc event queue based MSI is used, one needs to define the -following properties in the MSI device node: -- compatible: Must be "brcm,iproc-msi" -- msi-controller: claims itself as an MSI controller -- interrupts: List of interrupt IDs from its parent interrupt device - -Optional properties: -- brcm,pcie-msi-inten: Needs to be present for some older iProc platforms that -require the interrupt enable registers to be set explicitly to enable MSI - -Example: - pcie0: pcie@18012000 { - compatible = "brcm,iproc-pcie"; - reg = <0x18012000 0x1000>; - - #interrupt-cells = <1>; - interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &gic GIC_SPI 100 IRQ_TYPE_NONE>; - - linux,pci-domain = <0>; - - bus-range = <0x00 0xff>; - - #address-cells = <3>; - #size-cells = <2>; - device_type = "pci"; - ranges = <0x81000000 0 0 0x28000000 0 0x00010000 - 0x82000000 0 0x20000000 0x20000000 0 0x04000000>; - - phys = <&phy 0 5>; - phy-names = "pcie-phy"; - - brcm,pcie-ob; - brcm,pcie-ob-axi-offset = <0x00000000>; - - msi-parent = <&msi0>; - - /* iProc event queue based MSI */ - msi0: msi@18012000 { - compatible = "brcm,iproc-msi"; - msi-controller; - interrupt-parent = <&gic>; - interrupts = <GIC_SPI 96 IRQ_TYPE_NONE>, - <GIC_SPI 97 IRQ_TYPE_NONE>, - <GIC_SPI 98 IRQ_TYPE_NONE>, - <GIC_SPI 99 IRQ_TYPE_NONE>, - }; - }; - - pcie1: pcie@18013000 { - compatible = "brcm,iproc-pcie"; - reg = <0x18013000 0x1000>; - - #interrupt-cells = <1>; - interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &gic GIC_SPI 106 IRQ_TYPE_NONE>; - - linux,pci-domain = <1>; - - bus-range = <0x00 0xff>; - - #address-cells = <3>; - #size-cells = <2>; - device_type = "pci"; - ranges = <0x81000000 0 0 0x48000000 0 0x00010000 - 0x82000000 0 0x40000000 0x40000000 0 0x04000000>; - - phys = <&phy 1 6>; - phy-names = "pcie-phy"; - }; diff --git a/dts/Bindings/pci/brcm,iproc-pcie.yaml b/dts/Bindings/pci/brcm,iproc-pcie.yaml new file mode 100644 index 0000000000..0e07ab61a4 --- /dev/null +++ b/dts/Bindings/pci/brcm,iproc-pcie.yaml @@ -0,0 +1,173 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pci/brcm,iproc-pcie.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Broadcom iProc PCIe controller with the platform bus interface + +maintainers: + - Ray Jui <ray.jui@broadcom.com> + - Scott Branden <scott.branden@broadcom.com> + +allOf: + - $ref: /schemas/pci/pci-bus.yaml# + +properties: + compatible: + items: + - enum: + # for the first generation of PAXB based controller, used in SoCs + # including NSP, Cygnus, NS2, and Pegasus + - brcm,iproc-pcie + # for the second generation of PAXB-based controllers, used in + # Stingray + - brcm,iproc-pcie-paxb-v2 + # For the first generation of PAXC based controller, used in NS2 + - brcm,iproc-pcie-paxc + # For the second generation of PAXC based controller, used in Stingray + - brcm,iproc-pcie-paxc-v2 + + reg: + maxItems: 1 + description: > + Base address and length of the PCIe controller I/O register space + + ranges: + minItems: 1 + maxItems: 2 + description: > + Ranges for the PCI memory and I/O regions + + phys: + maxItems: 1 + + phy-names: + items: + - const: pcie-phy + + dma-coherent: true + + brcm,pcie-ob: + type: boolean + description: > + Some iProc SoCs do not have the outbound address mapping done by the + ASIC after power on reset. In this case, SW needs to configure it + + brcm,pcie-ob-axi-offset: + $ref: /schemas/types.yaml#/definitions/uint32 + description: > + The offset from the AXI address to the internal address used by the + iProc PCIe core (not the PCIe address) + + msi: + type: object + $ref: /schemas/interrupt-controller/msi-controller.yaml# + unevaluatedProperties: false + + properties: + compatible: + items: + - const: brcm,iproc-msi + + interrupts: + maxItems: 4 + + brcm,pcie-msi-inten: + type: boolean + description: + Needs to be present for some older iProc platforms that require the + interrupt enable registers to be set explicitly to enable MSI + + msi-parent: true + +dependencies: + brcm,pcie-ob-axi-offset: ["brcm,pcie-ob"] + brcm,pcie-msi-inten: [msi-controller] + +required: + - compatible + - reg + - ranges + +if: + properties: + compatible: + contains: + enum: + - brcm,iproc-pcie +then: + required: + - interrupt-map + - interrupt-map-mask + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + + gic: interrupt-controller { + interrupt-controller; + #interrupt-cells = <3>; + }; + + pcie@18012000 { + compatible = "brcm,iproc-pcie"; + reg = <0x18012000 0x1000>; + + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &gic GIC_SPI 100 IRQ_TYPE_NONE>; + + linux,pci-domain = <0>; + + bus-range = <0x00 0xff>; + + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + ranges = <0x81000000 0 0 0x28000000 0 0x00010000>, + <0x82000000 0 0x20000000 0x20000000 0 0x04000000>; + + phys = <&phy 0 5>; + phy-names = "pcie-phy"; + + brcm,pcie-ob; + brcm,pcie-ob-axi-offset = <0x00000000>; + + msi-parent = <&msi0>; + + /* iProc event queue based MSI */ + msi0: msi { + compatible = "brcm,iproc-msi"; + msi-controller; + interrupt-parent = <&gic>; + interrupts = <GIC_SPI 96 IRQ_TYPE_NONE>, + <GIC_SPI 97 IRQ_TYPE_NONE>, + <GIC_SPI 98 IRQ_TYPE_NONE>, + <GIC_SPI 99 IRQ_TYPE_NONE>; + }; + }; + - | + pcie@18013000 { + compatible = "brcm,iproc-pcie"; + reg = <0x18013000 0x1000>; + + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &gic GIC_SPI 106 IRQ_TYPE_NONE>; + + linux,pci-domain = <1>; + + bus-range = <0x00 0xff>; + + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + ranges = <0x81000000 0 0 0x48000000 0 0x00010000>, + <0x82000000 0 0x40000000 0x40000000 0 0x04000000>; + + phys = <&phy 1 6>; + phy-names = "pcie-phy"; + }; diff --git a/dts/Bindings/pci/brcm,stb-pcie.yaml b/dts/Bindings/pci/brcm,stb-pcie.yaml index 8680a0f86c..22491f7f88 100644 --- a/dts/Bindings/pci/brcm,stb-pcie.yaml +++ b/dts/Bindings/pci/brcm,stb-pcie.yaml @@ -4,40 +4,46 @@ $id: http://devicetree.org/schemas/pci/brcm,stb-pcie.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# -title: Brcmstb PCIe Host Controller Device Tree Bindings +title: Brcmstb PCIe Host Controller maintainers: - Nicolas Saenz Julienne <nsaenzjulienne@suse.de> -allOf: - - $ref: /schemas/pci/pci-bus.yaml# - properties: compatible: - const: brcm,bcm2711-pcie # The Raspberry Pi 4 + items: + - enum: + - brcm,bcm2711-pcie # The Raspberry Pi 4 + - brcm,bcm4908-pcie + - brcm,bcm7211-pcie # Broadcom STB version of RPi4 + - brcm,bcm7278-pcie # Broadcom 7278 Arm + - brcm,bcm7216-pcie # Broadcom 7216 Arm + - brcm,bcm7445-pcie # Broadcom 7445 Arm + - brcm,bcm7425-pcie # Broadcom 7425 MIPs + - brcm,bcm7435-pcie # Broadcom 7435 MIPs reg: maxItems: 1 interrupts: minItems: 1 - maxItems: 2 items: - description: PCIe host controller - description: builtin MSI controller interrupt-names: minItems: 1 - maxItems: 2 items: - const: pcie - const: msi ranges: - maxItems: 1 + minItems: 1 + maxItems: 4 dma-ranges: - maxItems: 1 + minItems: 1 + maxItems: 6 clocks: maxItems: 1 @@ -58,8 +64,41 @@ properties: aspm-no-l0s: true + brcm,clkreq-mode: + description: A string that determines the operating + clkreq mode of the PCIe RC HW with respect to controlling the refclk + signal. There are three different modes -- "safe", which drives the + refclk signal unconditionally and will work for all devices but does + not provide any power savings; "no-l1ss" -- which provides Clock + Power Management, L0s, and L1, but cannot provide L1 substate (L1SS) + power savings. If the downstream device connected to the RC is L1SS + capable AND the OS enables L1SS, all PCIe traffic may abruptly halt, + potentially hanging the system; "default" -- which provides L0s, L1, + and L1SS, but not compliant to provide Clock Power Management; + specifically, may not be able to meet the T_CLRon max timing of 400ns + as specified in "Dynamic Clock Control", section 3.2.5.2.2 PCI + Express Mini CEM 2.1 specification. This situation is atypical and + should happen only with older devices. + $ref: /schemas/types.yaml#/definitions/string + enum: [ safe, no-l1ss, default ] + + brcm,scb-sizes: + description: u64 giving the 64bit PCIe memory + viewport size of a memory controller. There may be up to + three controllers, and each size must be a power of two + with a size greater or equal to the amount of memory the + controller supports. Note that each memory controller + may have two component regions -- base and extended -- so + this information cannot be deduced from the dma-ranges. + $ref: /schemas/types.yaml#/definitions/uint64-array + items: + minItems: 1 + maxItems: 3 + required: + - compatible - reg + - ranges - dma-ranges - "#interrupt-cells" - interrupts @@ -68,6 +107,46 @@ required: - interrupt-map - msi-controller +allOf: + - $ref: /schemas/pci/pci-bus.yaml# + - $ref: /schemas/interrupt-controller/msi-controller.yaml# + - if: + properties: + compatible: + contains: + const: brcm,bcm4908-pcie + then: + properties: + resets: + items: + - description: reset controller handling the PERST# signal + + reset-names: + items: + - const: perst + + required: + - resets + - reset-names + - if: + properties: + compatible: + contains: + const: brcm,bcm7216-pcie + then: + properties: + resets: + items: + - description: phandle pointing to the RESCAL reset controller + + reset-names: + items: + - const: rescal + + required: + - resets + - reset-names + unevaluatedProperties: false examples: @@ -85,15 +164,40 @@ examples: #address-cells = <3>; #size-cells = <2>; #interrupt-cells = <1>; - interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>, + interrupts = <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "pcie", "msi"; interrupt-map-mask = <0x0 0x0 0x0 0x7>; - interrupt-map = <0 0 0 1 &gicv2 GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>; + interrupt-map = <0 0 0 1 &gicv2 GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH + 0 0 0 2 &gicv2 GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH + 0 0 0 3 &gicv2 GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH + 0 0 0 4 &gicv2 GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>; + msi-parent = <&pcie0>; msi-controller; ranges = <0x02000000 0x0 0xf8000000 0x6 0x00000000 0x0 0x04000000>; - dma-ranges = <0x02000000 0x0 0x00000000 0x0 0x00000000 0x0 0x80000000>; + dma-ranges = <0x42000000 0x1 0x00000000 0x0 0x40000000 0x0 0x80000000>, + <0x42000000 0x1 0x80000000 0x3 0x00000000 0x0 0x80000000>; brcm,enable-ssc; + brcm,scb-sizes = <0x0000000080000000 0x0000000080000000>; + + /* PCIe bridge, Root Port */ + pci@0,0 { + #address-cells = <3>; + #size-cells = <2>; + reg = <0x0 0x0 0x0 0x0 0x0>; + compatible = "pciclass,0604"; + device_type = "pci"; + vpcie3v3-supply = <&vreg7>; + ranges; + + /* PCIe endpoint */ + pci-ep@0,0 { + assigned-addresses = + <0x82010000 0x0 0xf8000000 0x6 0x00000000 0x0 0x2000>; + reg = <0x0 0x0 0x0 0x0 0x0>; + compatible = "pci14e4,1688"; + }; + }; }; }; diff --git a/dts/Bindings/pci/cdns,cdns-pcie-ep.yaml b/dts/Bindings/pci/cdns,cdns-pcie-ep.yaml index 50ce5d79d2..98651ab221 100644 --- a/dts/Bindings/pci/cdns,cdns-pcie-ep.yaml +++ b/dts/Bindings/pci/cdns,cdns-pcie-ep.yaml @@ -10,8 +10,7 @@ maintainers: - Tom Joseph <tjoseph@cadence.com> allOf: - - $ref: "cdns-pcie-ep.yaml#" - - $ref: "pci-ep.yaml#" + - $ref: cdns-pcie-ep.yaml# properties: compatible: @@ -29,6 +28,8 @@ required: - reg - reg-names +unevaluatedProperties: false + examples: - | bus { diff --git a/dts/Bindings/pci/cdns,cdns-pcie-host.yaml b/dts/Bindings/pci/cdns,cdns-pcie-host.yaml index 6d67067843..bc3c48f60f 100644 --- a/dts/Bindings/pci/cdns,cdns-pcie-host.yaml +++ b/dts/Bindings/pci/cdns,cdns-pcie-host.yaml @@ -11,7 +11,7 @@ maintainers: allOf: - $ref: /schemas/pci/pci-bus.yaml# - - $ref: "cdns-pcie-host.yaml#" + - $ref: cdns-pcie-host.yaml# properties: compatible: @@ -31,6 +31,8 @@ required: - reg - reg-names +unevaluatedProperties: false + examples: - | bus { diff --git a/dts/Bindings/pci/cdns-pcie-ep.yaml b/dts/Bindings/pci/cdns-pcie-ep.yaml index 016a5f6159..47a302ba4a 100644 --- a/dts/Bindings/pci/cdns-pcie-ep.yaml +++ b/dts/Bindings/pci/cdns-pcie-ep.yaml @@ -1,8 +1,8 @@ # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) %YAML 1.2 --- -$id: "http://devicetree.org/schemas/pci/cdns-pcie-ep.yaml#" -$schema: "http://devicetree.org/meta-schemas/core.yaml#" +$id: http://devicetree.org/schemas/pci/cdns-pcie-ep.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# title: Cadence PCIe Device @@ -10,7 +10,8 @@ maintainers: - Tom Joseph <tjoseph@cadence.com> allOf: - - $ref: "cdns-pcie.yaml#" + - $ref: cdns-pcie.yaml# + - $ref: pci-ep.yaml# properties: cdns,max-outbound-regions: @@ -20,5 +21,4 @@ properties: maximum: 32 default: 32 -required: - - cdns,max-outbound-regions +additionalProperties: true diff --git a/dts/Bindings/pci/cdns-pcie-host.yaml b/dts/Bindings/pci/cdns-pcie-host.yaml index 303078a7b7..a6b494401e 100644 --- a/dts/Bindings/pci/cdns-pcie-host.yaml +++ b/dts/Bindings/pci/cdns-pcie-host.yaml @@ -1,8 +1,8 @@ # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) %YAML 1.2 --- -$id: "http://devicetree.org/schemas/pci/cdns-pcie-host.yaml#" -$schema: "http://devicetree.org/meta-schemas/core.yaml#" +$id: http://devicetree.org/schemas/pci/cdns-pcie-host.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# title: Cadence PCIe Host @@ -10,8 +10,8 @@ maintainers: - Tom Joseph <tjoseph@cadence.com> allOf: - - $ref: "/schemas/pci/pci-bus.yaml#" - - $ref: "cdns-pcie.yaml#" + - $ref: /schemas/pci/pci-bus.yaml# + - $ref: cdns-pcie.yaml# properties: cdns,max-outbound-regions: @@ -33,3 +33,5 @@ properties: deprecated: true msi-parent: true + +additionalProperties: true diff --git a/dts/Bindings/pci/cdns-pcie.yaml b/dts/Bindings/pci/cdns-pcie.yaml index 02553d5e6c..2e14f422e8 100644 --- a/dts/Bindings/pci/cdns-pcie.yaml +++ b/dts/Bindings/pci/cdns-pcie.yaml @@ -1,8 +1,8 @@ # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) %YAML 1.2 --- -$id: "http://devicetree.org/schemas/pci/cdns-pcie.yaml#" -$schema: "http://devicetree.org/meta-schemas/core.yaml#" +$id: http://devicetree.org/schemas/pci/cdns-pcie.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# title: Cadence PCIe Core @@ -21,3 +21,5 @@ properties: items: - const: pcie-phy # FIXME: names when more than 1 + +additionalProperties: true diff --git a/dts/Bindings/pci/designware-pcie.txt b/dts/Bindings/pci/designware-pcie.txt deleted file mode 100644 index 78494c4050..0000000000 --- a/dts/Bindings/pci/designware-pcie.txt +++ /dev/null @@ -1,77 +0,0 @@ -* Synopsys DesignWare PCIe interface - -Required properties: -- compatible: - "snps,dw-pcie" for RC mode; - "snps,dw-pcie-ep" for EP mode; -- reg: For designware cores version < 4.80 contains the configuration - address space. For designware core version >= 4.80, contains - the configuration and ATU address space -- reg-names: Must be "config" for the PCIe configuration space and "atu" for - the ATU address space. - (The old way of getting the configuration address space from "ranges" - is deprecated and should be avoided.) -RC mode: -- #address-cells: set to <3> -- #size-cells: set to <2> -- device_type: set to "pci" -- ranges: ranges for the PCI memory and I/O regions -- #interrupt-cells: set to <1> -- interrupt-map-mask and interrupt-map: standard PCI - properties to define the mapping of the PCIe interface to interrupt - numbers. -EP mode: -- num-ib-windows: number of inbound address translation windows -- num-ob-windows: number of outbound address translation windows - -Optional properties: -- num-lanes: number of lanes to use (this property should be specified unless - the link is brought already up in BIOS) -- reset-gpio: GPIO pin number of power good signal -- clocks: Must contain an entry for each entry in clock-names. - See ../clocks/clock-bindings.txt for details. -- clock-names: Must include the following entries: - - "pcie" - - "pcie_bus" -- snps,enable-cdm-check: This is a boolean property and if present enables - automatic checking of CDM (Configuration Dependent Module) registers - for data corruption. CDM registers include standard PCIe configuration - space registers, Port Logic registers, DMA and iATU (internal Address - Translation Unit) registers. -RC mode: -- num-viewport: number of view ports configured in hardware. If a platform - does not specify it, the driver assumes 2. -- bus-range: PCI bus numbers covered (it is recommended for new devicetrees - to specify this property, to keep backwards compatibility a range of - 0x00-0xff is assumed if not present) - -EP mode: -- max-functions: maximum number of functions that can be configured - -Example configuration: - - pcie: pcie@dfc00000 { - compatible = "snps,dw-pcie"; - reg = <0xdfc00000 0x0001000>, /* IP registers */ - <0xd0000000 0x0002000>; /* Configuration space */ - reg-names = "dbi", "config"; - #address-cells = <3>; - #size-cells = <2>; - device_type = "pci"; - ranges = <0x81000000 0 0x00000000 0xde000000 0 0x00010000 - 0x82000000 0 0xd0400000 0xd0400000 0 0x0d000000>; - interrupts = <25>, <24>; - #interrupt-cells = <1>; - num-lanes = <1>; - }; -or - pcie: pcie@dfc00000 { - compatible = "snps,dw-pcie-ep"; - reg = <0xdfc00000 0x0001000>, /* IP registers 1 */ - <0xdfc01000 0x0001000>, /* IP registers 2 */ - <0xd0000000 0x2000000>; /* Configuration space */ - reg-names = "dbi", "dbi2", "addr_space"; - num-ib-windows = <6>; - num-ob-windows = <2>; - num-lanes = <1>; - }; diff --git a/dts/Bindings/pci/faraday,ftpci100.txt b/dts/Bindings/pci/faraday,ftpci100.txt deleted file mode 100644 index 5f8cb4962f..0000000000 --- a/dts/Bindings/pci/faraday,ftpci100.txt +++ /dev/null @@ -1,135 +0,0 @@ -Faraday Technology FTPCI100 PCI Host Bridge - -This PCI bridge is found inside that Cortina Systems Gemini SoC platform and -is a generic IP block from Faraday Technology. It exists in two variants: -plain and dual PCI. The plain version embeds a cascading interrupt controller -into the host bridge. The dual version routes the interrupts to the host -chips interrupt controller. - -The host controller appear on the PCI bus with vendor ID 0x159b (Faraday -Technology) and product ID 0x4321. - -Mandatory properties: - -- compatible: ranging from specific to generic, should be one of - "cortina,gemini-pci", "faraday,ftpci100" - "cortina,gemini-pci-dual", "faraday,ftpci100-dual" - "faraday,ftpci100" - "faraday,ftpci100-dual" -- reg: memory base and size for the host bridge -- #address-cells: set to <3> -- #size-cells: set to <2> -- #interrupt-cells: set to <1> -- bus-range: set to <0x00 0xff> -- device_type, set to "pci" -- ranges: see pci.txt -- interrupt-map-mask: see pci.txt -- interrupt-map: see pci.txt -- dma-ranges: three ranges for the inbound memory region. The ranges must - be aligned to a 1MB boundary, and may be 1MB, 2MB, 4MB, 8MB, 16MB, 32MB, 64MB, - 128MB, 256MB, 512MB, 1GB or 2GB in size. The memory should be marked as - pre-fetchable. - -Optional properties: -- clocks: when present, this should contain the peripheral clock (PCLK) and the - PCI clock (PCICLK). If these are not present, they are assumed to be - hard-wired enabled and always on. The PCI clock will be 33 or 66 MHz. -- clock-names: when present, this should contain "PCLK" for the peripheral - clock and "PCICLK" for the PCI-side clock. - -Mandatory subnodes: -- For "faraday,ftpci100" a node representing the interrupt-controller inside the - host bridge is mandatory. It has the following mandatory properties: - - interrupt: see interrupt-controller/interrupts.txt - - interrupt-controller: see interrupt-controller/interrupts.txt - - #address-cells: set to <0> - - #interrupt-cells: set to <1> - -I/O space considerations: - -The plain variant has 128MiB of non-prefetchable memory space, whereas the -"dual" variant has 64MiB. Take this into account when describing the ranges. - -Interrupt map considerations: - -The "dual" variant will get INT A, B, C, D from the system interrupt controller -and should point to respective interrupt in that controller in its -interrupt-map. - -The code which is the only documentation of how the Faraday PCI (the non-dual -variant) interrupts assigns the default interrupt mapping/swizzling has -typically been like this, doing the swizzling on the interrupt controller side -rather than in the interconnect: - -interrupt-map-mask = <0xf800 0 0 7>; -interrupt-map = - <0x4800 0 0 1 &pci_intc 0>, /* Slot 9 */ - <0x4800 0 0 2 &pci_intc 1>, - <0x4800 0 0 3 &pci_intc 2>, - <0x4800 0 0 4 &pci_intc 3>, - <0x5000 0 0 1 &pci_intc 1>, /* Slot 10 */ - <0x5000 0 0 2 &pci_intc 2>, - <0x5000 0 0 3 &pci_intc 3>, - <0x5000 0 0 4 &pci_intc 0>, - <0x5800 0 0 1 &pci_intc 2>, /* Slot 11 */ - <0x5800 0 0 2 &pci_intc 3>, - <0x5800 0 0 3 &pci_intc 0>, - <0x5800 0 0 4 &pci_intc 1>, - <0x6000 0 0 1 &pci_intc 3>, /* Slot 12 */ - <0x6000 0 0 2 &pci_intc 0>, - <0x6000 0 0 3 &pci_intc 1>, - <0x6000 0 0 4 &pci_intc 2>; - -Example: - -pci@50000000 { - compatible = "cortina,gemini-pci", "faraday,ftpci100"; - reg = <0x50000000 0x100>; - interrupts = <8 IRQ_TYPE_LEVEL_HIGH>, /* PCI A */ - <26 IRQ_TYPE_LEVEL_HIGH>, /* PCI B */ - <27 IRQ_TYPE_LEVEL_HIGH>, /* PCI C */ - <28 IRQ_TYPE_LEVEL_HIGH>; /* PCI D */ - #address-cells = <3>; - #size-cells = <2>; - #interrupt-cells = <1>; - - bus-range = <0x00 0xff>; - ranges = /* 1MiB I/O space 0x50000000-0x500fffff */ - <0x01000000 0 0 0x50000000 0 0x00100000>, - /* 128MiB non-prefetchable memory 0x58000000-0x5fffffff */ - <0x02000000 0 0x58000000 0x58000000 0 0x08000000>; - - /* DMA ranges */ - dma-ranges = - /* 128MiB at 0x00000000-0x07ffffff */ - <0x02000000 0 0x00000000 0x00000000 0 0x08000000>, - /* 64MiB at 0x00000000-0x03ffffff */ - <0x02000000 0 0x00000000 0x00000000 0 0x04000000>, - /* 64MiB at 0x00000000-0x03ffffff */ - <0x02000000 0 0x00000000 0x00000000 0 0x04000000>; - - interrupt-map-mask = <0xf800 0 0 7>; - interrupt-map = - <0x4800 0 0 1 &pci_intc 0>, /* Slot 9 */ - <0x4800 0 0 2 &pci_intc 1>, - <0x4800 0 0 3 &pci_intc 2>, - <0x4800 0 0 4 &pci_intc 3>, - <0x5000 0 0 1 &pci_intc 1>, /* Slot 10 */ - <0x5000 0 0 2 &pci_intc 2>, - <0x5000 0 0 3 &pci_intc 3>, - <0x5000 0 0 4 &pci_intc 0>, - <0x5800 0 0 1 &pci_intc 2>, /* Slot 11 */ - <0x5800 0 0 2 &pci_intc 3>, - <0x5800 0 0 3 &pci_intc 0>, - <0x5800 0 0 4 &pci_intc 1>, - <0x6000 0 0 1 &pci_intc 3>, /* Slot 12 */ - <0x6000 0 0 2 &pci_intc 0>, - <0x6000 0 0 3 &pci_intc 0>, - <0x6000 0 0 4 &pci_intc 0>; - pci_intc: interrupt-controller { - interrupt-parent = <&intcon>; - interrupt-controller; - #address-cells = <0>; - #interrupt-cells = <1>; - }; -}; diff --git a/dts/Bindings/pci/faraday,ftpci100.yaml b/dts/Bindings/pci/faraday,ftpci100.yaml new file mode 100644 index 0000000000..92efbf0f12 --- /dev/null +++ b/dts/Bindings/pci/faraday,ftpci100.yaml @@ -0,0 +1,174 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pci/faraday,ftpci100.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Faraday Technology FTPCI100 PCI Host Bridge + +maintainers: + - Linus Walleij <linus.walleij@linaro.org> + +description: | + This PCI bridge is found inside that Cortina Systems Gemini SoC platform and + is a generic IP block from Faraday Technology. It exists in two variants: + plain and dual PCI. The plain version embeds a cascading interrupt controller + into the host bridge. The dual version routes the interrupts to the host + chips interrupt controller. + The host controller appear on the PCI bus with vendor ID 0x159b (Faraday + Technology) and product ID 0x4321. + I/O space considerations: + The plain variant has 128MiB of non-prefetchable memory space, whereas the + "dual" variant has 64MiB. Take this into account when describing the ranges. + + Interrupt map considerations: + + The "dual" variant will get INT A, B, C, D from the system interrupt controller + and should point to respective interrupt in that controller in its interrupt-map. + + The code which is the only documentation of how the Faraday PCI (the non-dual + variant) interrupts assigns the default interrupt mapping/swizzling has + typically been like this, doing the swizzling on the interrupt controller side + rather than in the interconnect: + + interrupt-map-mask = <0xf800 0 0 7>; + interrupt-map = + <0x4800 0 0 1 &pci_intc 0>, /* Slot 9 */ + <0x4800 0 0 2 &pci_intc 1>, + <0x4800 0 0 3 &pci_intc 2>, + <0x4800 0 0 4 &pci_intc 3>, + <0x5000 0 0 1 &pci_intc 1>, /* Slot 10 */ + <0x5000 0 0 2 &pci_intc 2>, + <0x5000 0 0 3 &pci_intc 3>, + <0x5000 0 0 4 &pci_intc 0>, + <0x5800 0 0 1 &pci_intc 2>, /* Slot 11 */ + <0x5800 0 0 2 &pci_intc 3>, + <0x5800 0 0 3 &pci_intc 0>, + <0x5800 0 0 4 &pci_intc 1>, + <0x6000 0 0 1 &pci_intc 3>, /* Slot 12 */ + <0x6000 0 0 2 &pci_intc 0>, + <0x6000 0 0 3 &pci_intc 1>, + <0x6000 0 0 4 &pci_intc 2>; + +allOf: + - $ref: /schemas/pci/pci-bus.yaml# + +properties: + compatible: + oneOf: + - items: + - const: cortina,gemini-pci + - const: faraday,ftpci100 + - items: + - const: cortina,gemini-pci-dual + - const: faraday,ftpci100-dual + - const: faraday,ftpci100 + - const: faraday,ftpci100-dual + + reg: + maxItems: 1 + + "#address-cells": + const: 3 + + "#interrupt-cells": + const: 1 + + ranges: + minItems: 2 + + dma-ranges: + minItems: 3 + description: | + three ranges for the inbound memory region. The ranges must + be aligned to a 1MB boundary, and may be 1MB, 2MB, 4MB, 8MB, 16MB, 32MB, 64MB, + 128MB, 256MB, 512MB, 1GB or 2GB in size. The memory should be marked as + pre-fetchable. + + clocks: + items: + - description: peripheral clock (PCLK) + - description: PCI clock (PCICLK). + description: | + If these are not present, they are assumed to be + hard-wired enabled and always on. The PCI clock will be 33 or 66 MHz. + + clock-names: + items: + - const: PCLK + - const: PCICLK + + interrupt-controller: + type: object + +required: + - reg + - compatible + - "#interrupt-cells" + - interrupt-map-mask + - interrupt-map + - dma-ranges + +if: + properties: + compatible: + contains: + const: faraday,ftpci100 +then: + required: + - interrupt-controller + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + pci@50000000 { + compatible = "cortina,gemini-pci", "faraday,ftpci100"; + reg = <0x50000000 0x100>; + device_type = "pci"; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + + bus-range = <0x00 0xff>; + ranges = /* 1MiB I/O space 0x50000000-0x500fffff */ + <0x01000000 0 0 0x50000000 0 0x00100000>, + /* 128MiB non-prefetchable memory 0x58000000-0x5fffffff */ + <0x02000000 0 0x58000000 0x58000000 0 0x08000000>; + + /* DMA ranges */ + dma-ranges = + /* 128MiB at 0x00000000-0x07ffffff */ + <0x02000000 0 0x00000000 0x00000000 0 0x08000000>, + /* 64MiB at 0x00000000-0x03ffffff */ + <0x02000000 0 0x00000000 0x00000000 0 0x04000000>, + /* 64MiB at 0x00000000-0x03ffffff */ + <0x02000000 0 0x00000000 0x00000000 0 0x04000000>; + + interrupt-map-mask = <0xf800 0 0 7>; + interrupt-map = + <0x4800 0 0 1 &pci_intc 0>, /* Slot 9 */ + <0x4800 0 0 2 &pci_intc 1>, + <0x4800 0 0 3 &pci_intc 2>, + <0x4800 0 0 4 &pci_intc 3>, + <0x5000 0 0 1 &pci_intc 1>, /* Slot 10 */ + <0x5000 0 0 2 &pci_intc 2>, + <0x5000 0 0 3 &pci_intc 3>, + <0x5000 0 0 4 &pci_intc 0>, + <0x5800 0 0 1 &pci_intc 2>, /* Slot 11 */ + <0x5800 0 0 2 &pci_intc 3>, + <0x5800 0 0 3 &pci_intc 0>, + <0x5800 0 0 4 &pci_intc 1>, + <0x6000 0 0 1 &pci_intc 3>, /* Slot 12 */ + <0x6000 0 0 2 &pci_intc 0>, + <0x6000 0 0 3 &pci_intc 0>, + <0x6000 0 0 4 &pci_intc 0>; + pci_intc: interrupt-controller { + interrupt-parent = <&intcon>; + interrupt-controller; + interrupts = <8 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <0>; + #interrupt-cells = <1>; + }; + }; diff --git a/dts/Bindings/pci/fsl,imx6q-pcie-common.yaml b/dts/Bindings/pci/fsl,imx6q-pcie-common.yaml new file mode 100644 index 0000000000..d91b639ae7 --- /dev/null +++ b/dts/Bindings/pci/fsl,imx6q-pcie-common.yaml @@ -0,0 +1,270 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pci/fsl,imx6q-pcie-common.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Freescale i.MX6 PCIe RC/EP controller + +maintainers: + - Lucas Stach <l.stach@pengutronix.de> + - Richard Zhu <hongxing.zhu@nxp.com> + +description: + Generic Freescale i.MX PCIe Root Port and Endpoint controller + properties. + +properties: + clocks: + minItems: 3 + maxItems: 4 + + clock-names: + minItems: 3 + maxItems: 4 + + num-lanes: + const: 1 + + fsl,imx7d-pcie-phy: + $ref: /schemas/types.yaml#/definitions/phandle + description: A phandle to an fsl,imx7d-pcie-phy node. Additional + required properties for imx7d-pcie, imx7d-pcie-ep, imx8mq-pcie, + and imx8mq-pcie-ep. + + power-domains: + minItems: 1 + items: + - description: The phandle pointing to the DISPLAY domain for + imx6sx-pcie, imx6sx-pcie-ep, to PCIE_PHY power domain for + imx7d-pcie, imx7d-pcie-ep, imx8mq-pcie and imx8mq-pcie-ep. + - description: The phandle pointing to the PCIE_PHY power domains + for imx6sx-pcie and imx6sx-pcie-ep. + + power-domain-names: + minItems: 1 + items: + - const: pcie + - const: pcie_phy + + resets: + minItems: 2 + maxItems: 3 + description: Phandles to PCIe-related reset lines exposed by SRC + IP block. Additional required by imx7d-pcie, imx7d-pcie-ep, + imx8mq-pcie, and imx8mq-pcie-ep. + + reset-names: + minItems: 2 + maxItems: 3 + + fsl,tx-deemph-gen1: + description: Gen1 De-emphasis value (optional required). + $ref: /schemas/types.yaml#/definitions/uint32 + default: 0 + + fsl,tx-deemph-gen2-3p5db: + description: Gen2 (3.5db) De-emphasis value (optional required). + $ref: /schemas/types.yaml#/definitions/uint32 + default: 0 + + fsl,tx-deemph-gen2-6db: + description: Gen2 (6db) De-emphasis value (optional required). + $ref: /schemas/types.yaml#/definitions/uint32 + default: 20 + + fsl,tx-swing-full: + description: Gen2 TX SWING FULL value (optional required). + $ref: /schemas/types.yaml#/definitions/uint32 + default: 127 + + fsl,tx-swing-low: + description: TX launch amplitude swing_low value (optional required). + $ref: /schemas/types.yaml#/definitions/uint32 + default: 127 + + fsl,max-link-speed: + description: Specify PCI Gen for link capability (optional required). + Note that the IMX6 LVDS clock outputs do not meet gen2 jitter + requirements and thus for gen2 capability a gen2 compliant clock + generator should be used and configured. + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [1, 2, 3, 4] + default: 1 + + phys: + maxItems: 1 + + phy-names: + const: pcie-phy + + vpcie-supply: + description: Should specify the regulator in charge of PCIe port power. + The regulator will be enabled when initializing the PCIe host and + disabled either as part of the init process or when shutting down + the host (optional required). + + vph-supply: + description: Should specify the regulator in charge of VPH one of + the three PCIe PHY powers. This regulator can be supplied by both + 1.8v and 3.3v voltage supplies (optional required). + +required: + - clocks + - clock-names + - num-lanes + +allOf: + - if: + properties: + compatible: + contains: + enum: + - fsl,imx6sx-pcie + - fsl,imx6sx-pcie-ep + then: + properties: + clock-names: + items: + - {} + - {} + - const: pcie_phy + - const: pcie_inbound_axi + power-domains: + minItems: 2 + power-domain-names: + minItems: 2 + + - if: + properties: + compatible: + contains: + enum: + - fsl,imx8mq-pcie + - fsl,imx8mq-pcie-ep + then: + properties: + clock-names: + items: + - {} + - {} + - const: pcie_phy + - const: pcie_aux + - if: + properties: + compatible: + not: + contains: + enum: + - fsl,imx6sx-pcie + - fsl,imx8mq-pcie + - fsl,imx6sx-pcie-ep + - fsl,imx8mq-pcie-ep + then: + properties: + clocks: + maxItems: 3 + clock-names: + maxItems: 3 + + - if: + properties: + compatible: + contains: + enum: + - fsl,imx6q-pcie + - fsl,imx6qp-pcie + - fsl,imx7d-pcie + - fsl,imx6q-pcie-ep + - fsl,imx6qp-pcie-ep + - fsl,imx7d-pcie-ep + then: + properties: + clock-names: + maxItems: 3 + contains: + const: pcie_phy + + - if: + properties: + compatible: + contains: + enum: + - fsl,imx8mm-pcie + - fsl,imx8mp-pcie + - fsl,imx8mm-pcie-ep + - fsl,imx8mp-pcie-ep + then: + properties: + clock-names: + maxItems: 3 + contains: + const: pcie_aux + - if: + properties: + compatible: + contains: + enum: + - fsl,imx6q-pcie + - fsl,imx6qp-pcie + - fsl,imx6q-pcie-ep + - fsl,imx6qp-pcie-ep + then: + properties: + power-domains: false + power-domain-names: false + + - if: + not: + properties: + compatible: + contains: + enum: + - fsl,imx6sx-pcie + - fsl,imx6q-pcie + - fsl,imx6qp-pcie + - fsl,imx6sx-pcie-ep + - fsl,imx6q-pcie-ep + - fsl,imx6qp-pcie-ep + then: + properties: + power-domains: + maxItems: 1 + power-domain-names: false + + - if: + properties: + compatible: + contains: + enum: + - fsl,imx6q-pcie + - fsl,imx6sx-pcie + - fsl,imx6qp-pcie + - fsl,imx7d-pcie + - fsl,imx8mq-pcie + - fsl,imx6q-pcie-ep + - fsl,imx6sx-pcie-ep + - fsl,imx6qp-pcie-ep + - fsl,imx7d-pcie-ep + - fsl,imx8mq-pcie-ep + then: + properties: + resets: + minItems: 3 + reset-names: + items: + - const: pciephy + - const: apps + - const: turnoff + else: + properties: + resets: + maxItems: 2 + reset-names: + items: + - const: apps + - const: turnoff + +additionalProperties: true + +... diff --git a/dts/Bindings/pci/fsl,imx6q-pcie-ep.yaml b/dts/Bindings/pci/fsl,imx6q-pcie-ep.yaml new file mode 100644 index 0000000000..ee155ed5f1 --- /dev/null +++ b/dts/Bindings/pci/fsl,imx6q-pcie-ep.yaml @@ -0,0 +1,123 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pci/fsl,imx6q-pcie-ep.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Freescale i.MX6 PCIe Endpoint controller + +maintainers: + - Lucas Stach <l.stach@pengutronix.de> + - Richard Zhu <hongxing.zhu@nxp.com> + +description: |+ + This PCIe controller is based on the Synopsys DesignWare PCIe IP and + thus inherits all the common properties defined in snps,dw-pcie-ep.yaml. + The controller instances are dual mode where in they can work either in + Root Port mode or Endpoint mode but one at a time. + +properties: + compatible: + enum: + - fsl,imx8mm-pcie-ep + - fsl,imx8mq-pcie-ep + - fsl,imx8mp-pcie-ep + + reg: + minItems: 2 + + reg-names: + items: + - const: dbi + - const: addr_space + + clocks: + minItems: 3 + items: + - description: PCIe bridge clock. + - description: PCIe bus clock. + - description: PCIe PHY clock. + - description: Additional required clock entry for imx6sx-pcie, + imx6sx-pcie-ep, imx8mq-pcie, imx8mq-pcie-ep. + + clock-names: + minItems: 3 + maxItems: 4 + + interrupts: + items: + - description: builtin eDMA interrupter. + + interrupt-names: + items: + - const: dma + +required: + - compatible + - reg + - reg-names + - interrupts + - interrupt-names + +allOf: + - $ref: /schemas/pci/snps,dw-pcie-ep.yaml# + - $ref: /schemas/pci/fsl,imx6q-pcie-common.yaml# + - if: + properties: + compatible: + enum: + - fsl,imx8mq-pcie-ep + then: + properties: + clocks: + minItems: 4 + clock-names: + items: + - const: pcie + - const: pcie_bus + - const: pcie_phy + - const: pcie_aux + else: + properties: + clocks: + maxItems: 3 + clock-names: + items: + - const: pcie + - const: pcie_bus + - const: pcie_aux + + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/clock/imx8mp-clock.h> + #include <dt-bindings/power/imx8mp-power.h> + #include <dt-bindings/reset/imx8mp-reset.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + + pcie_ep: pcie-ep@33800000 { + compatible = "fsl,imx8mp-pcie-ep"; + reg = <0x33800000 0x000400000>, <0x18000000 0x08000000>; + reg-names = "dbi", "addr_space"; + clocks = <&clk IMX8MP_CLK_HSIO_ROOT>, + <&clk IMX8MP_CLK_HSIO_AXI>, + <&clk IMX8MP_CLK_PCIE_ROOT>; + clock-names = "pcie", "pcie_bus", "pcie_aux"; + assigned-clocks = <&clk IMX8MP_CLK_PCIE_AUX>; + assigned-clock-rates = <10000000>; + assigned-clock-parents = <&clk IMX8MP_SYS_PLL2_50M>; + num-lanes = <1>; + interrupts = <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>; /* eDMA */ + interrupt-names = "dma"; + fsl,max-link-speed = <3>; + power-domains = <&hsio_blk_ctrl IMX8MP_HSIOBLK_PD_PCIE>; + resets = <&src IMX8MP_RESET_PCIE_CTRL_APPS_EN>, + <&src IMX8MP_RESET_PCIE_CTRL_APPS_TURNOFF>; + reset-names = "apps", "turnoff"; + phys = <&pcie_phy>; + phy-names = "pcie-phy"; + num-ib-windows = <4>; + num-ob-windows = <4>; + }; diff --git a/dts/Bindings/pci/fsl,imx6q-pcie.txt b/dts/Bindings/pci/fsl,imx6q-pcie.txt deleted file mode 100644 index de4b2baf91..0000000000 --- a/dts/Bindings/pci/fsl,imx6q-pcie.txt +++ /dev/null @@ -1,97 +0,0 @@ -* Freescale i.MX6 PCIe interface - -This PCIe host controller is based on the Synopsys DesignWare PCIe IP -and thus inherits all the common properties defined in designware-pcie.txt. - -Required properties: -- compatible: - - "fsl,imx6q-pcie" - - "fsl,imx6sx-pcie", - - "fsl,imx6qp-pcie" - - "fsl,imx7d-pcie" - - "fsl,imx8mq-pcie" -- reg: base address and length of the PCIe controller -- interrupts: A list of interrupt outputs of the controller. Must contain an - entry for each entry in the interrupt-names property. -- interrupt-names: Must include the following entries: - - "msi": The interrupt that is asserted when an MSI is received -- clock-names: Must include the following additional entries: - - "pcie_phy" - -Optional properties: -- fsl,tx-deemph-gen1: Gen1 De-emphasis value. Default: 0 -- fsl,tx-deemph-gen2-3p5db: Gen2 (3.5db) De-emphasis value. Default: 0 -- fsl,tx-deemph-gen2-6db: Gen2 (6db) De-emphasis value. Default: 20 -- fsl,tx-swing-full: Gen2 TX SWING FULL value. Default: 127 -- fsl,tx-swing-low: TX launch amplitude swing_low value. Default: 127 -- fsl,max-link-speed: Specify PCI gen for link capability. Must be '2' for - gen2, otherwise will default to gen1. Note that the IMX6 LVDS clock outputs - do not meet gen2 jitter requirements and thus for gen2 capability a gen2 - compliant clock generator should be used and configured. -- reset-gpio: Should specify the GPIO for controlling the PCI bus device reset - signal. It's not polarity aware and defaults to active-low reset sequence - (L=reset state, H=operation state). -- reset-gpio-active-high: If present then the reset sequence using the GPIO - specified in the "reset-gpio" property is reversed (H=reset state, - L=operation state). -- vpcie-supply: Should specify the regulator in charge of PCIe port power. - The regulator will be enabled when initializing the PCIe host and - disabled either as part of the init process or when shutting down the - host. - -Additional required properties for imx6sx-pcie: -- clock names: Must include the following additional entries: - - "pcie_inbound_axi" -- power-domains: Must be set to phandles pointing to the DISPLAY and - PCIE_PHY power domains -- power-domain-names: Must be "pcie", "pcie_phy" - -Additional required properties for imx7d-pcie and imx8mq-pcie: -- power-domains: Must be set to a phandle pointing to PCIE_PHY power domain -- resets: Must contain phandles to PCIe-related reset lines exposed by SRC - IP block -- reset-names: Must contain the following entries: - - "pciephy" - - "apps" - - "turnoff" -- fsl,imx7d-pcie-phy: A phandle to an fsl,imx7d-pcie-phy node. - -Additional required properties for imx8mq-pcie: -- clock-names: Must include the following additional entries: - - "pcie_aux" - -Example: - - pcie@01000000 { - compatible = "fsl,imx6q-pcie", "snps,dw-pcie"; - reg = <0x01ffc000 0x04000>, - <0x01f00000 0x80000>; - reg-names = "dbi", "config"; - #address-cells = <3>; - #size-cells = <2>; - device_type = "pci"; - ranges = <0x00000800 0 0x01f00000 0x01f00000 0 0x00080000 - 0x81000000 0 0 0x01f80000 0 0x00010000 - 0x82000000 0 0x01000000 0x01000000 0 0x00f00000>; - num-lanes = <1>; - interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "msi"; - #interrupt-cells = <1>; - interrupt-map-mask = <0 0 0 0x7>; - interrupt-map = <0 0 0 1 &intc GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>, - <0 0 0 2 &intc GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>, - <0 0 0 3 &intc GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>, - <0 0 0 4 &intc GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks 144>, <&clks 206>, <&clks 189>; - clock-names = "pcie", "pcie_bus", "pcie_phy"; - }; - -* Freescale i.MX7d PCIe PHY - -This is the PHY associated with the IMX7d PCIe controller. It's used by the -PCI-e controller via the fsl,imx7d-pcie-phy phandle. - -Required properties: -- compatible: - - "fsl,imx7d-pcie-phy" -- reg: base address and length of the PCIe PHY controller diff --git a/dts/Bindings/pci/fsl,imx6q-pcie.yaml b/dts/Bindings/pci/fsl,imx6q-pcie.yaml new file mode 100644 index 0000000000..81bbb8728f --- /dev/null +++ b/dts/Bindings/pci/fsl,imx6q-pcie.yaml @@ -0,0 +1,190 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pci/fsl,imx6q-pcie.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Freescale i.MX6 PCIe host controller + +maintainers: + - Lucas Stach <l.stach@pengutronix.de> + - Richard Zhu <hongxing.zhu@nxp.com> + +description: |+ + This PCIe host controller is based on the Synopsys DesignWare PCIe IP + and thus inherits all the common properties defined in snps,dw-pcie.yaml. + The controller instances are dual mode where in they can work either in + Root Port mode or Endpoint mode but one at a time. + + See fsl,imx6q-pcie-ep.yaml for details on the Endpoint mode device tree + bindings. + +properties: + compatible: + enum: + - fsl,imx6q-pcie + - fsl,imx6sx-pcie + - fsl,imx6qp-pcie + - fsl,imx7d-pcie + - fsl,imx8mq-pcie + - fsl,imx8mm-pcie + - fsl,imx8mp-pcie + + reg: + items: + - description: Data Bus Interface (DBI) registers. + - description: PCIe configuration space region. + + reg-names: + items: + - const: dbi + - const: config + + clocks: + minItems: 3 + items: + - description: PCIe bridge clock. + - description: PCIe bus clock. + - description: PCIe PHY clock. + - description: Additional required clock entry for imx6sx-pcie, + imx6sx-pcie-ep, imx8mq-pcie, imx8mq-pcie-ep. + + clock-names: + minItems: 3 + maxItems: 4 + + interrupts: + items: + - description: builtin MSI controller. + + interrupt-names: + items: + - const: msi + + reset-gpio: + description: Should specify the GPIO for controlling the PCI bus device + reset signal. It's not polarity aware and defaults to active-low reset + sequence (L=reset state, H=operation state) (optional required). + + reset-gpio-active-high: + description: If present then the reset sequence using the GPIO + specified in the "reset-gpio" property is reversed (H=reset state, + L=operation state) (optional required). + type: boolean + +required: + - compatible + - reg + - reg-names + - "#address-cells" + - "#size-cells" + - device_type + - bus-range + - ranges + - interrupts + - interrupt-names + - "#interrupt-cells" + - interrupt-map-mask + - interrupt-map + +allOf: + - $ref: /schemas/pci/snps,dw-pcie.yaml# + - $ref: /schemas/pci/fsl,imx6q-pcie-common.yaml# + - if: + properties: + compatible: + enum: + - fsl,imx6sx-pcie + then: + properties: + clocks: + minItems: 4 + clock-names: + items: + - const: pcie + - const: pcie_bus + - const: pcie_phy + - const: pcie_inbound_axi + + - if: + properties: + compatible: + enum: + - fsl,imx8mq-pcie + then: + properties: + clocks: + minItems: 4 + clock-names: + items: + - const: pcie + - const: pcie_bus + - const: pcie_phy + - const: pcie_aux + + - if: + properties: + compatible: + enum: + - fsl,imx6q-pcie + - fsl,imx6qp-pcie + - fsl,imx7d-pcie + then: + properties: + clocks: + maxItems: 3 + clock-names: + items: + - const: pcie + - const: pcie_bus + - const: pcie_phy + + - if: + properties: + compatible: + enum: + - fsl,imx8mm-pcie + - fsl,imx8mp-pcie + then: + properties: + clocks: + maxItems: 3 + clock-names: + items: + - const: pcie + - const: pcie_bus + - const: pcie_aux + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/clock/imx6qdl-clock.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + + pcie: pcie@1ffc000 { + compatible = "fsl,imx6q-pcie"; + reg = <0x01ffc000 0x04000>, + <0x01f00000 0x80000>; + reg-names = "dbi", "config"; + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + bus-range = <0x00 0xff>; + ranges = <0x81000000 0 0 0x01f80000 0 0x00010000>, + <0x82000000 0 0x01000000 0x01000000 0 0x00f00000>; + num-lanes = <1>; + interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "msi"; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0x7>; + interrupt-map = <0 0 0 1 &gpc GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 2 &gpc GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 3 &gpc GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 4 &gpc GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6QDL_CLK_PCIE_AXI>, + <&clks IMX6QDL_CLK_LVDS1_GATE>, + <&clks IMX6QDL_CLK_PCIE_REF_125M>; + clock-names = "pcie", "pcie_bus", "pcie_phy"; + }; +... diff --git a/dts/Bindings/pci/hisilicon,kirin-pcie.yaml b/dts/Bindings/pci/hisilicon,kirin-pcie.yaml new file mode 100644 index 0000000000..c9f04999c9 --- /dev/null +++ b/dts/Bindings/pci/hisilicon,kirin-pcie.yaml @@ -0,0 +1,180 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pci/hisilicon,kirin-pcie.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: HiSilicon Kirin SoCs PCIe host DT description + +maintainers: + - Xiaowei Song <songxiaowei@hisilicon.com> + - Binghui Wang <wangbinghui@hisilicon.com> + +description: | + Kirin PCIe host controller is based on the Synopsys DesignWare PCI core. + It shares common functions with the PCIe DesignWare core driver and + inherits common properties defined in + Documentation/devicetree/bindings/pci/snps,dw-pcie.yaml. + +allOf: + - $ref: /schemas/pci/snps,dw-pcie.yaml# + +properties: + compatible: + contains: + enum: + - hisilicon,kirin960-pcie + - hisilicon,kirin970-pcie + + reg: + description: | + Should contain dbi, apb, config registers location and length. + For hisilicon,kirin960-pcie, it should also contain phy. + minItems: 3 + maxItems: 4 + + reg-names: + minItems: 3 + maxItems: 4 + + clocks: true + + clock-names: + items: + - const: pcie_phy_ref + - const: pcie_aux + - const: pcie_apb_phy + - const: pcie_apb_sys + - const: pcie_aclk + + phys: + maxItems: 1 + + hisilicon,clken-gpios: + description: | + Clock input enablement GPIOs from PCI devices like Ethernet, M.2 and + mini-PCIe slots. + +required: + - compatible + - reg + - reg-names + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/clock/hi3660-clock.h> + #include <dt-bindings/clock/hi3670-clock.h> + + soc { + #address-cells = <2>; + #size-cells = <2>; + + pcie@f4000000 { + compatible = "hisilicon,kirin960-pcie"; + reg = <0x0 0xf4000000 0x0 0x1000>, + <0x0 0xff3fe000 0x0 0x1000>, + <0x0 0xf3f20000 0x0 0x40000>, + <0x0 0xf5000000 0x0 0x2000>; + reg-names = "dbi", "apb", "phy", "config"; + bus-range = <0x0 0xff>; + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + ranges = <0x02000000 0x0 0x00000000 + 0x0 0xf6000000 + 0x0 0x02000000>; + num-lanes = <1>; + #interrupt-cells = <1>; + interrupts = <0 283 4>; + interrupt-names = "msi"; + interrupt-map-mask = <0xf800 0 0 7>; + interrupt-map = <0x0 0 0 1 &gic GIC_SPI 282 IRQ_TYPE_LEVEL_HIGH>, + <0x0 0 0 2 &gic GIC_SPI 283 IRQ_TYPE_LEVEL_HIGH>, + <0x0 0 0 3 &gic GIC_SPI 284 IRQ_TYPE_LEVEL_HIGH>, + <0x0 0 0 4 &gic GIC_SPI 285 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&crg_ctrl HI3660_PCIEPHY_REF>, + <&crg_ctrl HI3660_CLK_GATE_PCIEAUX>, + <&crg_ctrl HI3660_PCLK_GATE_PCIE_PHY>, + <&crg_ctrl HI3660_PCLK_GATE_PCIE_SYS>, + <&crg_ctrl HI3660_ACLK_GATE_PCIE>; + clock-names = "pcie_phy_ref", "pcie_aux", "pcie_apb_phy", + "pcie_apb_sys", "pcie_aclk"; + }; + + pcie@f5000000 { + compatible = "hisilicon,kirin970-pcie"; + reg = <0x0 0xf4000000 0x0 0x1000000>, + <0x0 0xfc180000 0x0 0x1000>, + <0x0 0xf5000000 0x0 0x2000>; + reg-names = "dbi", "apb", "config"; + bus-range = <0x0 0xff>; + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + phys = <&pcie_phy>; + ranges = <0x02000000 0x0 0x00000000 + 0x0 0xf6000000 + 0x0 0x02000000>; + num-lanes = <1>; + #interrupt-cells = <1>; + interrupts = <GIC_SPI 283 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "msi"; + interrupt-map-mask = <0 0 0 7>; + interrupt-map = <0x0 0 0 1 &gic GIC_SPI 282 IRQ_TYPE_LEVEL_HIGH>, + <0x0 0 0 2 &gic GIC_SPI 283 IRQ_TYPE_LEVEL_HIGH>, + <0x0 0 0 3 &gic GIC_SPI 284 IRQ_TYPE_LEVEL_HIGH>, + <0x0 0 0 4 &gic GIC_SPI 285 IRQ_TYPE_LEVEL_HIGH>; + reset-gpios = <&gpio7 0 0>; + hisilicon,clken-gpios = <&gpio27 3 0>, <&gpio17 0 0>, <&gpio20 6 0>; + pcie@0,0 { // Lane 0: PCIe switch: Bus 1, Device 0 + reg = <0 0 0 0 0>; + compatible = "pciclass,0604"; + device_type = "pci"; + #address-cells = <3>; + #size-cells = <2>; + ranges; + + pcie@0,0 { // Lane 0: upstream + reg = <0 0 0 0 0>; + compatible = "pciclass,0604"; + device_type = "pci"; + #address-cells = <3>; + #size-cells = <2>; + ranges; + + pcie@1,0 { // Lane 4: M.2 + reg = <0x0800 0 0 0 0>; + compatible = "pciclass,0604"; + device_type = "pci"; + reset-gpios = <&gpio3 1 0>; + #address-cells = <3>; + #size-cells = <2>; + ranges; + }; + + pcie@5,0 { // Lane 5: Mini PCIe + reg = <0x2800 0 0 0 0>; + compatible = "pciclass,0604"; + device_type = "pci"; + reset-gpios = <&gpio27 4 0 >; + #address-cells = <3>; + #size-cells = <2>; + ranges; + }; + + pcie@7,0 { // Lane 6: Ethernet + reg = <0x03800 0 0 0 0>; + compatible = "pciclass,0604"; + device_type = "pci"; + reset-gpios = <&gpio25 2 0 >; + #address-cells = <3>; + #size-cells = <2>; + ranges; + }; + }; + }; + }; + }; diff --git a/dts/Bindings/pci/hisilicon-histb-pcie.txt b/dts/Bindings/pci/hisilicon-histb-pcie.txt index 760b4d7406..5f0cf6c2fe 100644 --- a/dts/Bindings/pci/hisilicon-histb-pcie.txt +++ b/dts/Bindings/pci/hisilicon-histb-pcie.txt @@ -3,7 +3,7 @@ HiSilicon STB PCIe host bridge DT description The HiSilicon STB PCIe host controller is based on the DesignWare PCIe core. It shares common functions with the DesignWare PCIe core driver and inherits common properties defined in -Documentation/devicetree/bindings/pci/designware-pcie.txt. +Documentation/devicetree/bindings/pci/snps,dw-pcie.yaml. Additional properties are described here: diff --git a/dts/Bindings/pci/hisilicon-pcie.txt b/dts/Bindings/pci/hisilicon-pcie.txt deleted file mode 100644 index d6796ef54e..0000000000 --- a/dts/Bindings/pci/hisilicon-pcie.txt +++ /dev/null @@ -1,43 +0,0 @@ -HiSilicon Hip05 and Hip06 PCIe host bridge DT description - -HiSilicon PCIe host controller is based on the Synopsys DesignWare PCI core. -It shares common functions with the PCIe DesignWare core driver and inherits -common properties defined in -Documentation/devicetree/bindings/pci/designware-pcie.txt. - -Additional properties are described here: - -Required properties -- compatible: Should contain "hisilicon,hip05-pcie" or "hisilicon,hip06-pcie". -- reg: Should contain rc_dbi, config registers location and length. -- reg-names: Must include the following entries: - "rc_dbi": controller configuration registers; - "config": PCIe configuration space registers. -- msi-parent: Should be its_pcie which is an ITS receiving MSI interrupts. -- port-id: Should be 0, 1, 2 or 3. - -Optional properties: -- status: Either "ok" or "disabled". -- dma-coherent: Present if DMA operations are coherent. - -Hip05 Example (note that Hip06 is the same except compatible): - pcie@b0080000 { - compatible = "hisilicon,hip05-pcie", "snps,dw-pcie"; - reg = <0 0xb0080000 0 0x10000>, <0x220 0x00000000 0 0x2000>; - reg-names = "rc_dbi", "config"; - bus-range = <0 15>; - msi-parent = <&its_pcie>; - #address-cells = <3>; - #size-cells = <2>; - device_type = "pci"; - dma-coherent; - ranges = <0x82000000 0 0x00000000 0x220 0x00000000 0 0x10000000>; - num-lanes = <8>; - port-id = <1>; - #interrupt-cells = <1>; - interrupt-map-mask = <0xf800 0 0 7>; - interrupt-map = <0x0 0 0 1 &mbigen_pcie 1 10 - 0x0 0 0 2 &mbigen_pcie 2 11 - 0x0 0 0 3 &mbigen_pcie 3 12 - 0x0 0 0 4 &mbigen_pcie 4 13>; - }; diff --git a/dts/Bindings/pci/host-generic-pci.yaml b/dts/Bindings/pci/host-generic-pci.yaml index 47353d0cd3..d25423aa71 100644 --- a/dts/Bindings/pci/host-generic-pci.yaml +++ b/dts/Bindings/pci/host-generic-pci.yaml @@ -106,6 +106,9 @@ properties: maxItems: 3 dma-coherent: true + iommu-map: true + iommu-map-mask: true + msi-parent: true required: - compatible @@ -137,6 +140,8 @@ allOf: reg: maxItems: 1 +unevaluatedProperties: false + examples: - | diff --git a/dts/Bindings/pci/intel,ixp4xx-pci.yaml b/dts/Bindings/pci/intel,ixp4xx-pci.yaml new file mode 100644 index 0000000000..debfb54a80 --- /dev/null +++ b/dts/Bindings/pci/intel,ixp4xx-pci.yaml @@ -0,0 +1,100 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pci/intel,ixp4xx-pci.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Intel IXP4xx PCI controller + +maintainers: + - Linus Walleij <linus.walleij@linaro.org> + +description: PCI host controller found in the Intel IXP4xx SoC series. + +allOf: + - $ref: /schemas/pci/pci-bus.yaml# + +properties: + compatible: + items: + - enum: + - intel,ixp42x-pci + - intel,ixp43x-pci + description: The two supported variants are ixp42x and ixp43x, + though more variants may exist. + + reg: + items: + - description: IXP4xx-specific registers + + interrupts: + items: + - description: Main PCI interrupt + - description: PCI DMA interrupt 1 + - description: PCI DMA interrupt 2 + + ranges: + maxItems: 2 + description: Typically one memory range of 64MB and one IO + space range of 64KB. + + dma-ranges: + maxItems: 1 + description: The DMA range tells the PCI host which addresses + the RAM is at. It can map only 64MB so if the RAM is bigger + than 64MB the DMA access has to be restricted to these + addresses. + + "#interrupt-cells": true + + interrupt-map: true + + interrupt-map-mask: + items: + - const: 0xf800 + - const: 0 + - const: 0 + - const: 7 + +required: + - compatible + - reg + - dma-ranges + - "#interrupt-cells" + - interrupt-map + - interrupt-map-mask + +unevaluatedProperties: false + +examples: + - | + pci@c0000000 { + compatible = "intel,ixp43x-pci"; + reg = <0xc0000000 0x1000>; + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + bus-range = <0x00 0xff>; + + ranges = + <0x02000000 0 0x48000000 0x48000000 0 0x04000000>, + <0x01000000 0 0x00000000 0x4c000000 0 0x00010000>; + dma-ranges = + <0x02000000 0 0x00000000 0x00000000 0 0x04000000>; + + #interrupt-cells = <1>; + interrupt-map-mask = <0xf800 0 0 7>; + interrupt-map = + <0x0800 0 0 1 &gpio0 11 3>, /* INT A on slot 1 is irq 11 */ + <0x0800 0 0 2 &gpio0 10 3>, /* INT B on slot 1 is irq 10 */ + <0x0800 0 0 3 &gpio0 9 3>, /* INT C on slot 1 is irq 9 */ + <0x0800 0 0 4 &gpio0 8 3>, /* INT D on slot 1 is irq 8 */ + <0x1000 0 0 1 &gpio0 10 3>, /* INT A on slot 2 is irq 10 */ + <0x1000 0 0 2 &gpio0 9 3>, /* INT B on slot 2 is irq 9 */ + <0x1000 0 0 3 &gpio0 8 3>, /* INT C on slot 2 is irq 8 */ + <0x1000 0 0 4 &gpio0 11 3>, /* INT D on slot 2 is irq 11 */ + <0x1800 0 0 1 &gpio0 9 3>, /* INT A on slot 3 is irq 9 */ + <0x1800 0 0 2 &gpio0 8 3>, /* INT B on slot 3 is irq 8 */ + <0x1800 0 0 3 &gpio0 11 3>, /* INT C on slot 3 is irq 11 */ + <0x1800 0 0 4 &gpio0 10 3>; /* INT D on slot 3 is irq 10 */ + }; diff --git a/dts/Bindings/pci/intel,keembay-pcie-ep.yaml b/dts/Bindings/pci/intel,keembay-pcie-ep.yaml new file mode 100644 index 0000000000..730e63fd76 --- /dev/null +++ b/dts/Bindings/pci/intel,keembay-pcie-ep.yaml @@ -0,0 +1,69 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pci/intel,keembay-pcie-ep.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Intel Keem Bay PCIe controller Endpoint mode + +maintainers: + - Wan Ahmad Zainie <wan.ahmad.zainie.wan.mohamad@intel.com> + - Srikanth Thokala <srikanth.thokala@intel.com> + +properties: + compatible: + const: intel,keembay-pcie-ep + + reg: + maxItems: 5 + + reg-names: + items: + - const: dbi + - const: dbi2 + - const: atu + - const: addr_space + - const: apb + + interrupts: + maxItems: 4 + + interrupt-names: + items: + - const: pcie + - const: pcie_ev + - const: pcie_err + - const: pcie_mem_access + + num-lanes: + description: Number of lanes to use. + enum: [ 1, 2 ] + +required: + - compatible + - reg + - reg-names + - interrupts + - interrupt-names + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/interrupt-controller/irq.h> + pcie-ep@37000000 { + compatible = "intel,keembay-pcie-ep"; + reg = <0x37000000 0x00001000>, + <0x37100000 0x00001000>, + <0x37300000 0x00001000>, + <0x36000000 0x01000000>, + <0x37800000 0x00000200>; + reg-names = "dbi", "dbi2", "atu", "addr_space", "apb"; + interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 108 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "pcie", "pcie_ev", "pcie_err", "pcie_mem_access"; + num-lanes = <2>; + }; diff --git a/dts/Bindings/pci/intel,keembay-pcie.yaml b/dts/Bindings/pci/intel,keembay-pcie.yaml new file mode 100644 index 0000000000..505acc4f3e --- /dev/null +++ b/dts/Bindings/pci/intel,keembay-pcie.yaml @@ -0,0 +1,97 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pci/intel,keembay-pcie.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Intel Keem Bay PCIe controller Root Complex mode + +maintainers: + - Wan Ahmad Zainie <wan.ahmad.zainie.wan.mohamad@intel.com> + - Srikanth Thokala <srikanth.thokala@intel.com> + +allOf: + - $ref: /schemas/pci/pci-bus.yaml# + +properties: + compatible: + const: intel,keembay-pcie + + ranges: + maxItems: 1 + + reset-gpios: + maxItems: 1 + + reg: + maxItems: 4 + + reg-names: + items: + - const: dbi + - const: atu + - const: config + - const: apb + + clocks: + maxItems: 2 + + clock-names: + items: + - const: master + - const: aux + + interrupts: + maxItems: 3 + + interrupt-names: + items: + - const: pcie + - const: pcie_ev + - const: pcie_err + + num-lanes: + description: Number of lanes to use. + enum: [ 1, 2 ] + +required: + - compatible + - reg + - reg-names + - ranges + - clocks + - clock-names + - interrupts + - interrupt-names + - reset-gpios + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/interrupt-controller/irq.h> + #include <dt-bindings/gpio/gpio.h> + #define KEEM_BAY_A53_PCIE + #define KEEM_BAY_A53_AUX_PCIE + pcie@37000000 { + compatible = "intel,keembay-pcie"; + reg = <0x37000000 0x00001000>, + <0x37300000 0x00001000>, + <0x36e00000 0x00200000>, + <0x37800000 0x00000200>; + reg-names = "dbi", "atu", "config", "apb"; + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + ranges = <0x02000000 0 0x36000000 0x36000000 0 0x00e00000>; + interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "pcie", "pcie_ev", "pcie_err"; + clocks = <&scmi_clk KEEM_BAY_A53_PCIE>, + <&scmi_clk KEEM_BAY_A53_AUX_PCIE>; + clock-names = "master", "aux"; + reset-gpios = <&pca2 9 GPIO_ACTIVE_LOW>; + num-lanes = <2>; + }; diff --git a/dts/Bindings/pci/intel-gw-pcie.yaml b/dts/Bindings/pci/intel-gw-pcie.yaml index 64b2c64ca8..54e2890ae6 100644 --- a/dts/Bindings/pci/intel-gw-pcie.yaml +++ b/dts/Bindings/pci/intel-gw-pcie.yaml @@ -7,7 +7,18 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: PCIe RC controller on Intel Gateway SoCs maintainers: - - Dilip Kota <eswara.kota@linux.intel.com> + - Rahul Tanwar <rtanwar@maxlinear.com> + +select: + properties: + compatible: + contains: + const: intel,lgm-pcie + required: + - compatible + +allOf: + - $ref: /schemas/pci/snps,dw-pcie.yaml# properties: compatible: @@ -15,15 +26,6 @@ properties: - const: intel,lgm-pcie - const: snps,dw-pcie - device_type: - const: pci - - "#address-cells": - const: 3 - - "#size-cells": - const: 2 - reg: items: - description: Controller control and status registers. @@ -54,30 +56,13 @@ properties: reset-gpios: maxItems: 1 - linux,pci-domain: true - num-lanes: maximum: 2 - description: Number of lanes to use for this port. - - '#interrupt-cells': - const: 1 - - interrupt-map-mask: - description: Standard PCI IRQ mapping properties. - - interrupt-map: - description: Standard PCI IRQ mapping properties. max-link-speed: - description: Specify PCI Gen for link capability. - $ref: /schemas/types.yaml#/definitions/uint32 enum: [1, 2, 3, 4] default: 1 - bus-range: - description: Range of bus numbers associated with this controller. - reset-assert-ms: description: | Delay after asserting reset to the PCIe device. @@ -86,9 +71,6 @@ properties: required: - compatible - - device_type - - "#address-cells" - - "#size-cells" - reg - reg-names - ranges @@ -101,7 +83,7 @@ required: - interrupt-map - interrupt-map-mask -additionalProperties: false +unevaluatedProperties: false examples: - | diff --git a/dts/Bindings/pci/kirin-pcie.txt b/dts/Bindings/pci/kirin-pcie.txt deleted file mode 100644 index 6bbe43818a..0000000000 --- a/dts/Bindings/pci/kirin-pcie.txt +++ /dev/null @@ -1,50 +0,0 @@ -HiSilicon Kirin SoCs PCIe host DT description - -Kirin PCIe host controller is based on the Synopsys DesignWare PCI core. -It shares common functions with the PCIe DesignWare core driver and -inherits common properties defined in -Documentation/devicetree/bindings/pci/designware-pcie.txt. - -Additional properties are described here: - -Required properties -- compatible: - "hisilicon,kirin960-pcie" for PCIe of Kirin960 SoC -- reg: Should contain rc_dbi, apb, phy, config registers location and length. -- reg-names: Must include the following entries: - "dbi": controller configuration registers; - "apb": apb Ctrl register defined by Kirin; - "phy": apb PHY register defined by Kirin; - "config": PCIe configuration space registers. -- reset-gpios: The GPIO to generate PCIe PERST# assert and deassert signal. - -Optional properties: - -Example based on kirin960: - - pcie@f4000000 { - compatible = "hisilicon,kirin-pcie"; - reg = <0x0 0xf4000000 0x0 0x1000>, <0x0 0xff3fe000 0x0 0x1000>, - <0x0 0xf3f20000 0x0 0x40000>, <0x0 0xF4000000 0 0x2000>; - reg-names = "dbi","apb","phy", "config"; - bus-range = <0x0 0x1>; - #address-cells = <3>; - #size-cells = <2>; - device_type = "pci"; - ranges = <0x02000000 0x0 0x00000000 0x0 0xf5000000 0x0 0x2000000>; - num-lanes = <1>; - #interrupt-cells = <1>; - interrupt-map-mask = <0xf800 0 0 7>; - interrupt-map = <0x0 0 0 1 &gic 0 0 0 282 4>, - <0x0 0 0 2 &gic 0 0 0 283 4>, - <0x0 0 0 3 &gic 0 0 0 284 4>, - <0x0 0 0 4 &gic 0 0 0 285 4>; - clocks = <&crg_ctrl HI3660_PCIEPHY_REF>, - <&crg_ctrl HI3660_CLK_GATE_PCIEAUX>, - <&crg_ctrl HI3660_PCLK_GATE_PCIE_PHY>, - <&crg_ctrl HI3660_PCLK_GATE_PCIE_SYS>, - <&crg_ctrl HI3660_ACLK_GATE_PCIE>; - clock-names = "pcie_phy_ref", "pcie_aux", - "pcie_apb_phy", "pcie_apb_sys", "pcie_aclk"; - reset-gpios = <&gpio11 1 0 >; - }; diff --git a/dts/Bindings/pci/layerscape-pci.txt b/dts/Bindings/pci/layerscape-pci.txt index 99a386ea69..ee8a4791a7 100644 --- a/dts/Bindings/pci/layerscape-pci.txt +++ b/dts/Bindings/pci/layerscape-pci.txt @@ -1,7 +1,7 @@ Freescale Layerscape PCIe controller This PCIe host controller is based on the Synopsys DesignWare PCIe IP -and thus inherits all the common properties defined in designware-pcie.txt. +and thus inherits all the common properties defined in snps,dw-pcie.yaml. This controller derives its clocks from the Reset Configuration Word (RCW) which is used to describe the PLL settings at the time of chip-reset. @@ -23,43 +23,57 @@ Required properties: "fsl,ls1012a-pcie" "fsl,ls1028a-pcie" EP mode: + "fsl,ls1028a-pcie-ep", "fsl,ls-pcie-ep" "fsl,ls1046a-pcie-ep", "fsl,ls-pcie-ep" + "fsl,ls1088a-pcie-ep", "fsl,ls-pcie-ep" + "fsl,ls2088a-pcie-ep", "fsl,ls-pcie-ep" + "fsl,lx2160ar2-pcie-ep", "fsl,ls-pcie-ep" - reg: base addresses and lengths of the PCIe controller register blocks. - interrupts: A list of interrupt outputs of the controller. Must contain an entry for each entry in the interrupt-names property. -- interrupt-names: Must include the following entries: - "intr": The interrupt that is asserted for controller interrupts +- interrupt-names: It could include the following entries: + "aer": Used for interrupt line which reports AER events when + non MSI/MSI-X/INTx mode is used + "pme": Used for interrupt line which reports PME events when + non MSI/MSI-X/INTx mode is used + "intr": Used for SoCs(like ls2080a, lx2160a, ls2080a, ls2088a, ls1088a) + which has a single interrupt line for miscellaneous controller + events(could include AER and PME events). - fsl,pcie-scfg: Must include two entries. The first entry must be a link to the SCFG device node - The second entry must be '0' or '1' based on physical PCIe controller index. + The second entry is the physical PCIe controller index starting from '0'. This is used to get SCFG PEXN registers - dma-coherent: Indicates that the hardware IP block can ensure the coherency of the data transferred from/to the IP block. This can avoid the software cache flush/invalid actions, and improve the performance significantly. +Optional properties: +- big-endian: If the PEX_LUT and PF register block is in big-endian, specify + this property. + Example: - pcie@3400000 { - compatible = "fsl,ls1021a-pcie"; - reg = <0x00 0x03400000 0x0 0x00010000 /* controller registers */ - 0x40 0x00000000 0x0 0x00002000>; /* configuration space */ - reg-names = "regs", "config"; - interrupts = <GIC_SPI 177 IRQ_TYPE_LEVEL_HIGH>; /* controller interrupt */ - interrupt-names = "intr"; - fsl,pcie-scfg = <&scfg 0>; - #address-cells = <3>; - #size-cells = <2>; - device_type = "pci"; - dma-coherent; - num-lanes = <4>; - bus-range = <0x0 0xff>; - ranges = <0x81000000 0x0 0x00000000 0x40 0x00010000 0x0 0x00010000 /* downstream I/O */ - 0xc2000000 0x0 0x20000000 0x40 0x20000000 0x0 0x20000000 /* prefetchable memory */ - 0x82000000 0x0 0x40000000 0x40 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */ - #interrupt-cells = <1>; - interrupt-map-mask = <0 0 0 7>; - interrupt-map = <0000 0 0 1 &gic GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>, - <0000 0 0 2 &gic GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>, - <0000 0 0 3 &gic GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>, - <0000 0 0 4 &gic GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>; - }; + pcie@3400000 { + compatible = "fsl,ls1088a-pcie"; + reg = <0x00 0x03400000 0x0 0x00100000>, /* controller registers */ + <0x20 0x00000000 0x0 0x00002000>; /* configuration space */ + reg-names = "regs", "config"; + interrupts = <0 108 IRQ_TYPE_LEVEL_HIGH>; /* aer interrupt */ + interrupt-names = "aer"; + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + dma-coherent; + num-viewport = <256>; + bus-range = <0x0 0xff>; + ranges = <0x81000000 0x0 0x00000000 0x20 0x00010000 0x0 0x00010000 /* downstream I/O */ + 0x82000000 0x0 0x40000000 0x20 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */ + msi-parent = <&its>; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 7>; + interrupt-map = <0000 0 0 1 &gic 0 0 0 109 IRQ_TYPE_LEVEL_HIGH>, + <0000 0 0 2 &gic 0 0 0 110 IRQ_TYPE_LEVEL_HIGH>, + <0000 0 0 3 &gic 0 0 0 111 IRQ_TYPE_LEVEL_HIGH>, + <0000 0 0 4 &gic 0 0 0 112 IRQ_TYPE_LEVEL_HIGH>; + iommu-map = <0 &smmu 0 1>; /* Fixed-up by bootloader */ + }; diff --git a/dts/Bindings/pci/loongson.yaml b/dts/Bindings/pci/loongson.yaml index 30e7cf1aeb..a8324a9bd0 100644 --- a/dts/Bindings/pci/loongson.yaml +++ b/dts/Bindings/pci/loongson.yaml @@ -17,14 +17,13 @@ allOf: properties: compatible: - oneOf: - - const: loongson,ls2k-pci - - const: loongson,ls7a-pci - - const: loongson,rs780e-pci + enum: + - loongson,ls2k-pci + - loongson,ls7a-pci + - loongson,rs780e-pci reg: minItems: 1 - maxItems: 2 items: - description: CFG0 standard config space register - description: CFG1 extended config space register @@ -39,6 +38,8 @@ required: - reg - ranges +unevaluatedProperties: false + examples: - | diff --git a/dts/Bindings/pci/mediatek,mt7621-pcie.yaml b/dts/Bindings/pci/mediatek,mt7621-pcie.yaml new file mode 100644 index 0000000000..e63e6458ce --- /dev/null +++ b/dts/Bindings/pci/mediatek,mt7621-pcie.yaml @@ -0,0 +1,145 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pci/mediatek,mt7621-pcie.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: MediaTek MT7621 PCIe controller + +maintainers: + - Sergio Paracuellos <sergio.paracuellos@gmail.com> + +description: |+ + MediaTek MT7621 PCIe subsys supports a single Root Complex (RC) + with 3 Root Ports. Each Root Port supports a Gen1 1-lane Link + +allOf: + - $ref: /schemas/pci/pci-bus.yaml# + +properties: + compatible: + const: mediatek,mt7621-pci + + reg: + items: + - description: host-pci bridge registers + - description: pcie port 0 RC control registers + - description: pcie port 1 RC control registers + - description: pcie port 2 RC control registers + + ranges: + maxItems: 2 + +patternProperties: + '^pcie@[0-2],0$': + type: object + $ref: /schemas/pci/pci-bus.yaml# + + properties: + resets: + maxItems: 1 + + clocks: + maxItems: 1 + + phys: + maxItems: 1 + + phy-names: + pattern: '^pcie-phy[0-2]$' + + required: + - "#interrupt-cells" + - interrupt-map-mask + - interrupt-map + - resets + - clocks + - phys + - phy-names + - ranges + + unevaluatedProperties: false + +required: + - compatible + - reg + - ranges + - "#interrupt-cells" + - interrupt-map-mask + - interrupt-map + - reset-gpios + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/interrupt-controller/mips-gic.h> + + pcie: pcie@1e140000 { + compatible = "mediatek,mt7621-pci"; + reg = <0x1e140000 0x100>, + <0x1e142000 0x100>, + <0x1e143000 0x100>, + <0x1e144000 0x100>; + + #address-cells = <3>; + #size-cells = <2>; + pinctrl-names = "default"; + pinctrl-0 = <&pcie_pins>; + device_type = "pci"; + ranges = <0x02000000 0 0x60000000 0x60000000 0 0x10000000>, /* pci memory */ + <0x01000000 0 0x1e160000 0x1e160000 0 0x00010000>; /* io space */ + #interrupt-cells = <1>; + interrupt-map-mask = <0xF800 0 0 0>; + interrupt-map = <0x0000 0 0 0 &gic GIC_SHARED 4 IRQ_TYPE_LEVEL_HIGH>, + <0x0800 0 0 0 &gic GIC_SHARED 24 IRQ_TYPE_LEVEL_HIGH>, + <0x1000 0 0 0 &gic GIC_SHARED 25 IRQ_TYPE_LEVEL_HIGH>; + reset-gpios = <&gpio 19 GPIO_ACTIVE_LOW>; + + pcie@0,0 { + reg = <0x0000 0 0 0 0>; + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &gic GIC_SHARED 4 IRQ_TYPE_LEVEL_HIGH>; + resets = <&rstctrl 24>; + clocks = <&clkctrl 24>; + phys = <&pcie0_phy 1>; + phy-names = "pcie-phy0"; + ranges; + }; + + pcie@1,0 { + reg = <0x0800 0 0 0 0>; + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &gic GIC_SHARED 24 IRQ_TYPE_LEVEL_HIGH>; + resets = <&rstctrl 25>; + clocks = <&clkctrl 25>; + phys = <&pcie0_phy 1>; + phy-names = "pcie-phy1"; + ranges; + }; + + pcie@2,0 { + reg = <0x1000 0 0 0 0>; + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &gic GIC_SHARED 25 IRQ_TYPE_LEVEL_HIGH>; + resets = <&rstctrl 26>; + clocks = <&clkctrl 26>; + phys = <&pcie2_phy 0>; + phy-names = "pcie-phy2"; + ranges; + }; + }; +... diff --git a/dts/Bindings/pci/mediatek-pcie-cfg.yaml b/dts/Bindings/pci/mediatek-pcie-cfg.yaml new file mode 100644 index 0000000000..841a3d284b --- /dev/null +++ b/dts/Bindings/pci/mediatek-pcie-cfg.yaml @@ -0,0 +1,39 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pci/mediatek-pcie-cfg.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: MediaTek PCIECFG controller + +maintainers: + - Chuanjia Liu <chuanjia.liu@mediatek.com> + - Jianjun Wang <jianjun.wang@mediatek.com> + +description: | + The MediaTek PCIECFG controller controls some feature about + LTSSM, ASPM and so on. + +properties: + compatible: + items: + - enum: + - mediatek,generic-pciecfg + - const: syscon + + reg: + maxItems: 1 + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + pciecfg: pciecfg@1a140000 { + compatible = "mediatek,generic-pciecfg", "syscon"; + reg = <0x1a140000 0x1000>; + }; +... diff --git a/dts/Bindings/pci/mediatek-pcie-gen3.yaml b/dts/Bindings/pci/mediatek-pcie-gen3.yaml new file mode 100644 index 0000000000..7e8c7a2a5f --- /dev/null +++ b/dts/Bindings/pci/mediatek-pcie-gen3.yaml @@ -0,0 +1,242 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pci/mediatek-pcie-gen3.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Gen3 PCIe controller on MediaTek SoCs + +maintainers: + - Jianjun Wang <jianjun.wang@mediatek.com> + +description: |+ + PCIe Gen3 MAC controller for MediaTek SoCs, it supports Gen3 speed + and compatible with Gen2, Gen1 speed. + + This PCIe controller supports up to 256 MSI vectors, the MSI hardware + block diagram is as follows: + + +-----+ + | GIC | + +-----+ + ^ + | + port->irq + | + +-+-+-+-+-+-+-+-+ + |0|1|2|3|4|5|6|7| (PCIe intc) + +-+-+-+-+-+-+-+-+ + ^ ^ ^ + | | ... | + +-------+ +------+ +-----------+ + | | | + +-+-+---+--+--+ +-+-+---+--+--+ +-+-+---+--+--+ + |0|1|...|30|31| |0|1|...|30|31| |0|1|...|30|31| (MSI sets) + +-+-+---+--+--+ +-+-+---+--+--+ +-+-+---+--+--+ + ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ + | | | | | | | | | | | | (MSI vectors) + | | | | | | | | | | | | + + (MSI SET0) (MSI SET1) ... (MSI SET7) + + With 256 MSI vectors supported, the MSI vectors are composed of 8 sets, + each set has its own address for MSI message, and supports 32 MSI vectors + to generate interrupt. + +properties: + compatible: + oneOf: + - items: + - enum: + - mediatek,mt7986-pcie + - mediatek,mt8188-pcie + - mediatek,mt8195-pcie + - const: mediatek,mt8192-pcie + - const: mediatek,mt8192-pcie + + reg: + maxItems: 1 + + reg-names: + items: + - const: pcie-mac + + interrupts: + maxItems: 1 + + ranges: + minItems: 1 + maxItems: 8 + + iommu-map: + maxItems: 1 + + iommu-map-mask: + const: 0 + + resets: + minItems: 1 + maxItems: 2 + + reset-names: + minItems: 1 + maxItems: 2 + items: + enum: [ phy, mac ] + + clocks: + minItems: 4 + maxItems: 6 + + clock-names: + minItems: 4 + maxItems: 6 + + assigned-clocks: + maxItems: 1 + + assigned-clock-parents: + maxItems: 1 + + phys: + maxItems: 1 + + phy-names: + items: + - const: pcie-phy + + power-domains: + maxItems: 1 + + '#interrupt-cells': + const: 1 + + interrupt-controller: + description: Interrupt controller node for handling legacy PCI interrupts. + type: object + properties: + '#address-cells': + const: 0 + '#interrupt-cells': + const: 1 + interrupt-controller: true + + required: + - '#address-cells' + - '#interrupt-cells' + - interrupt-controller + + additionalProperties: false + +required: + - compatible + - reg + - reg-names + - interrupts + - ranges + - clocks + - clock-names + - '#interrupt-cells' + - interrupt-controller + +allOf: + - $ref: /schemas/pci/pci-bus.yaml# + - if: + properties: + compatible: + const: mediatek,mt8192-pcie + then: + properties: + clock-names: + items: + - const: pl_250m + - const: tl_26m + - const: tl_96m + - const: tl_32k + - const: peri_26m + - const: top_133m + - if: + properties: + compatible: + contains: + enum: + - mediatek,mt8188-pcie + - mediatek,mt8195-pcie + then: + properties: + clock-names: + items: + - const: pl_250m + - const: tl_26m + - const: tl_96m + - const: tl_32k + - const: peri_26m + - const: peri_mem + - if: + properties: + compatible: + contains: + enum: + - mediatek,mt7986-pcie + then: + properties: + clock-names: + items: + - const: pl_250m + - const: tl_26m + - const: peri_26m + - const: top_133m + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/interrupt-controller/irq.h> + + bus { + #address-cells = <2>; + #size-cells = <2>; + + pcie: pcie@11230000 { + compatible = "mediatek,mt8192-pcie"; + device_type = "pci"; + #address-cells = <3>; + #size-cells = <2>; + reg = <0x00 0x11230000 0x00 0x4000>; + reg-names = "pcie-mac"; + interrupts = <GIC_SPI 251 IRQ_TYPE_LEVEL_HIGH 0>; + bus-range = <0x00 0xff>; + ranges = <0x82000000 0x00 0x12000000 0x00 + 0x12000000 0x00 0x1000000>; + clocks = <&infracfg 44>, + <&infracfg 40>, + <&infracfg 43>, + <&infracfg 97>, + <&infracfg 99>, + <&infracfg 111>; + clock-names = "pl_250m", "tl_26m", "tl_96m", + "tl_32k", "peri_26m", "top_133m"; + assigned-clocks = <&topckgen 50>; + assigned-clock-parents = <&topckgen 91>; + + phys = <&pciephy>; + phy-names = "pcie-phy"; + + resets = <&infracfg_rst 2>, + <&infracfg_rst 3>; + reset-names = "phy", "mac"; + + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0x7>; + interrupt-map = <0 0 0 1 &pcie_intc 0>, + <0 0 0 2 &pcie_intc 1>, + <0 0 0 3 &pcie_intc 2>, + <0 0 0 4 &pcie_intc 3>; + pcie_intc: interrupt-controller { + #address-cells = <0>; + #interrupt-cells = <1>; + interrupt-controller; + }; + }; + }; diff --git a/dts/Bindings/pci/mediatek-pcie.txt b/dts/Bindings/pci/mediatek-pcie.txt index 7468d66676..6842275222 100644 --- a/dts/Bindings/pci/mediatek-pcie.txt +++ b/dts/Bindings/pci/mediatek-pcie.txt @@ -7,8 +7,9 @@ Required properties: "mediatek,mt7622-pcie" "mediatek,mt7623-pcie" "mediatek,mt7629-pcie" + "airoha,en7523-pcie" - device_type: Must be "pci" -- reg: Base addresses and lengths of the PCIe subsys and root ports. +- reg: Base addresses and lengths of the root ports. - reg-names: Names of the above areas to use during resource lookup. - #address-cells: Address representation for root ports (must be 3) - #size-cells: Size representation for root ports (must be 2) @@ -47,9 +48,12 @@ Required properties for MT7623/MT2701: - reset-names: Must be "pcie-rst0", "pcie-rst1", "pcie-rstN".. based on the number of root ports. -Required properties for MT2712/MT7622: +Required properties for MT2712/MT7622/MT7629: -interrupts: A list of interrupt outputs of the controller, must have one entry for each PCIe port +- interrupt-names: Must include the following entries: + - "pcie_irq": The interrupt that is asserted when an MSI/INTX is received +- linux,pci-domain: PCI domain ID. Should be unique for each host controller In addition, the device tree node must have sub-nodes describing each PCIe port interface, having the following mandatory properties: @@ -143,130 +147,143 @@ Examples for MT7623: Examples for MT2712: - pcie: pcie@11700000 { + pcie1: pcie@112ff000 { compatible = "mediatek,mt2712-pcie"; device_type = "pci"; - reg = <0 0x11700000 0 0x1000>, - <0 0x112ff000 0 0x1000>; - reg-names = "port0", "port1"; + reg = <0 0x112ff000 0 0x1000>; + reg-names = "port1"; + linux,pci-domain = <1>; #address-cells = <3>; #size-cells = <2>; - interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&topckgen CLK_TOP_PE2_MAC_P0_SEL>, - <&topckgen CLK_TOP_PE2_MAC_P1_SEL>, - <&pericfg CLK_PERI_PCIE0>, + interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "pcie_irq"; + clocks = <&topckgen CLK_TOP_PE2_MAC_P1_SEL>, <&pericfg CLK_PERI_PCIE1>; - clock-names = "sys_ck0", "sys_ck1", "ahb_ck0", "ahb_ck1"; - phys = <&pcie0_phy PHY_TYPE_PCIE>, <&pcie1_phy PHY_TYPE_PCIE>; - phy-names = "pcie-phy0", "pcie-phy1"; + clock-names = "sys_ck1", "ahb_ck1"; + phys = <&u3port1 PHY_TYPE_PCIE>; + phy-names = "pcie-phy1"; bus-range = <0x00 0xff>; - ranges = <0x82000000 0 0x20000000 0x0 0x20000000 0 0x10000000>; + ranges = <0x82000000 0 0x11400000 0x0 0x11400000 0 0x300000>; + status = "disabled"; - pcie0: pcie@0,0 { - reg = <0x0000 0 0 0 0>; - #address-cells = <3>; - #size-cells = <2>; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 7>; + interrupt-map = <0 0 0 1 &pcie_intc1 0>, + <0 0 0 2 &pcie_intc1 1>, + <0 0 0 3 &pcie_intc1 2>, + <0 0 0 4 &pcie_intc1 3>; + pcie_intc1: interrupt-controller { + interrupt-controller; + #address-cells = <0>; #interrupt-cells = <1>; - ranges; - interrupt-map-mask = <0 0 0 7>; - interrupt-map = <0 0 0 1 &pcie_intc0 0>, - <0 0 0 2 &pcie_intc0 1>, - <0 0 0 3 &pcie_intc0 2>, - <0 0 0 4 &pcie_intc0 3>; - pcie_intc0: interrupt-controller { - interrupt-controller; - #address-cells = <0>; - #interrupt-cells = <1>; - }; }; + }; - pcie1: pcie@1,0 { - reg = <0x0800 0 0 0 0>; - #address-cells = <3>; - #size-cells = <2>; + pcie0: pcie@11700000 { + compatible = "mediatek,mt2712-pcie"; + device_type = "pci"; + reg = <0 0x11700000 0 0x1000>; + reg-names = "port0"; + linux,pci-domain = <0>; + #address-cells = <3>; + #size-cells = <2>; + interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "pcie_irq"; + clocks = <&topckgen CLK_TOP_PE2_MAC_P0_SEL>, + <&pericfg CLK_PERI_PCIE0>; + clock-names = "sys_ck0", "ahb_ck0"; + phys = <&u3port0 PHY_TYPE_PCIE>; + phy-names = "pcie-phy0"; + bus-range = <0x00 0xff>; + ranges = <0x82000000 0 0x20000000 0x0 0x20000000 0 0x10000000>; + status = "disabled"; + + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 7>; + interrupt-map = <0 0 0 1 &pcie_intc0 0>, + <0 0 0 2 &pcie_intc0 1>, + <0 0 0 3 &pcie_intc0 2>, + <0 0 0 4 &pcie_intc0 3>; + pcie_intc0: interrupt-controller { + interrupt-controller; + #address-cells = <0>; #interrupt-cells = <1>; - ranges; - interrupt-map-mask = <0 0 0 7>; - interrupt-map = <0 0 0 1 &pcie_intc1 0>, - <0 0 0 2 &pcie_intc1 1>, - <0 0 0 3 &pcie_intc1 2>, - <0 0 0 4 &pcie_intc1 3>; - pcie_intc1: interrupt-controller { - interrupt-controller; - #address-cells = <0>; - #interrupt-cells = <1>; - }; }; }; Examples for MT7622: - pcie: pcie@1a140000 { + pcie0: pcie@1a143000 { compatible = "mediatek,mt7622-pcie"; device_type = "pci"; - reg = <0 0x1a140000 0 0x1000>, - <0 0x1a143000 0 0x1000>, - <0 0x1a145000 0 0x1000>; - reg-names = "subsys", "port0", "port1"; + reg = <0 0x1a143000 0 0x1000>; + reg-names = "port0"; + linux,pci-domain = <0>; #address-cells = <3>; #size-cells = <2>; - interrupts = <GIC_SPI 228 IRQ_TYPE_LEVEL_LOW>, - <GIC_SPI 229 IRQ_TYPE_LEVEL_LOW>; + interrupts = <GIC_SPI 228 IRQ_TYPE_LEVEL_LOW>; + interrupt-names = "pcie_irq"; clocks = <&pciesys CLK_PCIE_P0_MAC_EN>, - <&pciesys CLK_PCIE_P1_MAC_EN>, <&pciesys CLK_PCIE_P0_AHB_EN>, - <&pciesys CLK_PCIE_P1_AHB_EN>, <&pciesys CLK_PCIE_P0_AUX_EN>, - <&pciesys CLK_PCIE_P1_AUX_EN>, <&pciesys CLK_PCIE_P0_AXI_EN>, - <&pciesys CLK_PCIE_P1_AXI_EN>, <&pciesys CLK_PCIE_P0_OBFF_EN>, - <&pciesys CLK_PCIE_P1_OBFF_EN>, - <&pciesys CLK_PCIE_P0_PIPE_EN>, - <&pciesys CLK_PCIE_P1_PIPE_EN>; - clock-names = "sys_ck0", "sys_ck1", "ahb_ck0", "ahb_ck1", - "aux_ck0", "aux_ck1", "axi_ck0", "axi_ck1", - "obff_ck0", "obff_ck1", "pipe_ck0", "pipe_ck1"; - phys = <&pcie0_phy PHY_TYPE_PCIE>, <&pcie1_phy PHY_TYPE_PCIE>; - phy-names = "pcie-phy0", "pcie-phy1"; + <&pciesys CLK_PCIE_P0_PIPE_EN>; + clock-names = "sys_ck0", "ahb_ck0", "aux_ck0", + "axi_ck0", "obff_ck0", "pipe_ck0"; + power-domains = <&scpsys MT7622_POWER_DOMAIN_HIF0>; bus-range = <0x00 0xff>; - ranges = <0x82000000 0 0x20000000 0x0 0x20000000 0 0x10000000>; + ranges = <0x82000000 0 0x20000000 0x0 0x20000000 0 0x8000000>; + status = "disabled"; - pcie0: pcie@0,0 { - reg = <0x0000 0 0 0 0>; - #address-cells = <3>; - #size-cells = <2>; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 7>; + interrupt-map = <0 0 0 1 &pcie_intc0 0>, + <0 0 0 2 &pcie_intc0 1>, + <0 0 0 3 &pcie_intc0 2>, + <0 0 0 4 &pcie_intc0 3>; + pcie_intc0: interrupt-controller { + interrupt-controller; + #address-cells = <0>; #interrupt-cells = <1>; - ranges; - interrupt-map-mask = <0 0 0 7>; - interrupt-map = <0 0 0 1 &pcie_intc0 0>, - <0 0 0 2 &pcie_intc0 1>, - <0 0 0 3 &pcie_intc0 2>, - <0 0 0 4 &pcie_intc0 3>; - pcie_intc0: interrupt-controller { - interrupt-controller; - #address-cells = <0>; - #interrupt-cells = <1>; - }; }; + }; - pcie1: pcie@1,0 { - reg = <0x0800 0 0 0 0>; - #address-cells = <3>; - #size-cells = <2>; + pcie1: pcie@1a145000 { + compatible = "mediatek,mt7622-pcie"; + device_type = "pci"; + reg = <0 0x1a145000 0 0x1000>; + reg-names = "port1"; + linux,pci-domain = <1>; + #address-cells = <3>; + #size-cells = <2>; + interrupts = <GIC_SPI 229 IRQ_TYPE_LEVEL_LOW>; + interrupt-names = "pcie_irq"; + clocks = <&pciesys CLK_PCIE_P1_MAC_EN>, + /* designer has connect RC1 with p0_ahb clock */ + <&pciesys CLK_PCIE_P0_AHB_EN>, + <&pciesys CLK_PCIE_P1_AUX_EN>, + <&pciesys CLK_PCIE_P1_AXI_EN>, + <&pciesys CLK_PCIE_P1_OBFF_EN>, + <&pciesys CLK_PCIE_P1_PIPE_EN>; + clock-names = "sys_ck1", "ahb_ck1", "aux_ck1", + "axi_ck1", "obff_ck1", "pipe_ck1"; + + power-domains = <&scpsys MT7622_POWER_DOMAIN_HIF0>; + bus-range = <0x00 0xff>; + ranges = <0x82000000 0 0x28000000 0x0 0x28000000 0 0x8000000>; + status = "disabled"; + + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 7>; + interrupt-map = <0 0 0 1 &pcie_intc1 0>, + <0 0 0 2 &pcie_intc1 1>, + <0 0 0 3 &pcie_intc1 2>, + <0 0 0 4 &pcie_intc1 3>; + pcie_intc1: interrupt-controller { + interrupt-controller; + #address-cells = <0>; #interrupt-cells = <1>; - ranges; - interrupt-map-mask = <0 0 0 7>; - interrupt-map = <0 0 0 1 &pcie_intc1 0>, - <0 0 0 2 &pcie_intc1 1>, - <0 0 0 3 &pcie_intc1 2>, - <0 0 0 4 &pcie_intc1 3>; - pcie_intc1: interrupt-controller { - interrupt-controller; - #address-cells = <0>; - #interrupt-cells = <1>; - }; }; }; diff --git a/dts/Bindings/pci/microchip,pcie-host.yaml b/dts/Bindings/pci/microchip,pcie-host.yaml new file mode 100644 index 0000000000..f7a3c26363 --- /dev/null +++ b/dts/Bindings/pci/microchip,pcie-host.yaml @@ -0,0 +1,140 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pci/microchip,pcie-host.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Microchip PCIe Root Port Bridge Controller + +maintainers: + - Daire McNamara <daire.mcnamara@microchip.com> + +allOf: + - $ref: /schemas/pci/pci-bus.yaml# + - $ref: /schemas/interrupt-controller/msi-controller.yaml# + +properties: + compatible: + const: microchip,pcie-host-1.0 # PolarFire + + reg: + maxItems: 2 + + reg-names: + items: + - const: cfg + - const: apb + + clocks: + description: + Fabric Interface Controllers, FICs, are the interface between the FPGA + fabric and the core complex on PolarFire SoC. The FICs require two clocks, + one from each side of the interface. The "FIC clocks" described by this + property are on the core complex side & communication through a FIC is not + possible unless it's corresponding clock is enabled. A clock must be + enabled for each of the interfaces the root port is connected through. + This could in theory be all 4 interfaces, one interface or any combination + in between. + minItems: 1 + items: + - description: FIC0's clock + - description: FIC1's clock + - description: FIC2's clock + - description: FIC3's clock + + clock-names: + description: + As any FIC connection combination is possible, the names should match the + order in the clocks property and take the form "ficN" where N is a number + 0-3 + minItems: 1 + maxItems: 4 + items: + pattern: '^fic[0-3]$' + + interrupts: + minItems: 1 + items: + - description: PCIe host controller + - description: builtin MSI controller + + interrupt-names: + minItems: 1 + items: + - const: pcie + - const: msi + + ranges: + maxItems: 1 + + dma-ranges: + minItems: 1 + maxItems: 6 + + msi-controller: + description: Identifies the node as an MSI controller. + + msi-parent: + description: MSI controller the device is capable of using. + + interrupt-controller: + type: object + properties: + '#address-cells': + const: 0 + + '#interrupt-cells': + const: 1 + + interrupt-controller: true + + required: + - '#address-cells' + - '#interrupt-cells' + - interrupt-controller + + additionalProperties: false + +required: + - reg + - reg-names + - "#interrupt-cells" + - interrupts + - interrupt-map-mask + - interrupt-map + - msi-controller + +unevaluatedProperties: false + +examples: + - | + soc { + #address-cells = <2>; + #size-cells = <2>; + pcie0: pcie@2030000000 { + compatible = "microchip,pcie-host-1.0"; + reg = <0x0 0x70000000 0x0 0x08000000>, + <0x0 0x43000000 0x0 0x00010000>; + reg-names = "cfg", "apb"; + device_type = "pci"; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + interrupts = <119>; + interrupt-map-mask = <0x0 0x0 0x0 0x7>; + interrupt-map = <0 0 0 1 &pcie_intc0 0>, + <0 0 0 2 &pcie_intc0 1>, + <0 0 0 3 &pcie_intc0 2>, + <0 0 0 4 &pcie_intc0 3>; + interrupt-parent = <&plic0>; + msi-parent = <&pcie0>; + msi-controller; + bus-range = <0x00 0x7f>; + ranges = <0x03000000 0x0 0x78000000 0x0 0x78000000 0x0 0x04000000>; + pcie_intc0: interrupt-controller { + #address-cells = <0>; + #interrupt-cells = <1>; + interrupt-controller; + }; + }; + }; diff --git a/dts/Bindings/pci/mvebu-pci.txt b/dts/Bindings/pci/mvebu-pci.txt index 6173af6885..6d022a9d36 100644 --- a/dts/Bindings/pci/mvebu-pci.txt +++ b/dts/Bindings/pci/mvebu-pci.txt @@ -77,9 +77,15 @@ and the following optional properties: - marvell,pcie-lane: the physical PCIe lane number, for ports having multiple lanes. If this property is not found, we assume that the value is 0. +- num-lanes: number of SerDes PCIe lanes for this link (1 or 4) - reset-gpios: optional GPIO to PERST# - reset-delay-us: delay in us to wait after reset de-assertion, if not specified will default to 100ms, as required by the PCIe specification. +- interrupt-names: list of interrupt names, supported are: + - "intx" - interrupt line triggered by one of the legacy interrupt +- interrupts or interrupts-extended: List of the interrupt sources which + corresponding to the "interrupt-names". If non-empty then also additional + 'interrupt-controller' subnode must be defined. Example: @@ -141,6 +147,7 @@ pcie-controller { interrupt-map = <0 0 0 0 &mpic 58>; marvell,pcie-port = <0>; marvell,pcie-lane = <0>; + num-lanes = <1>; /* low-active PERST# reset on GPIO 25 */ reset-gpios = <&gpio0 25 1>; /* wait 20ms for device settle after reset deassertion */ @@ -161,6 +168,7 @@ pcie-controller { interrupt-map = <0 0 0 0 &mpic 59>; marvell,pcie-port = <0>; marvell,pcie-lane = <1>; + num-lanes = <1>; clocks = <&gateclk 6>; }; @@ -177,6 +185,7 @@ pcie-controller { interrupt-map = <0 0 0 0 &mpic 60>; marvell,pcie-port = <0>; marvell,pcie-lane = <2>; + num-lanes = <1>; clocks = <&gateclk 7>; }; @@ -193,6 +202,7 @@ pcie-controller { interrupt-map = <0 0 0 0 &mpic 61>; marvell,pcie-port = <0>; marvell,pcie-lane = <3>; + num-lanes = <1>; clocks = <&gateclk 8>; }; @@ -209,6 +219,7 @@ pcie-controller { interrupt-map = <0 0 0 0 &mpic 62>; marvell,pcie-port = <1>; marvell,pcie-lane = <0>; + num-lanes = <1>; clocks = <&gateclk 9>; }; @@ -225,6 +236,7 @@ pcie-controller { interrupt-map = <0 0 0 0 &mpic 63>; marvell,pcie-port = <1>; marvell,pcie-lane = <1>; + num-lanes = <1>; clocks = <&gateclk 10>; }; @@ -241,6 +253,7 @@ pcie-controller { interrupt-map = <0 0 0 0 &mpic 64>; marvell,pcie-port = <1>; marvell,pcie-lane = <2>; + num-lanes = <1>; clocks = <&gateclk 11>; }; @@ -257,6 +270,7 @@ pcie-controller { interrupt-map = <0 0 0 0 &mpic 65>; marvell,pcie-port = <1>; marvell,pcie-lane = <3>; + num-lanes = <1>; clocks = <&gateclk 12>; }; @@ -273,6 +287,7 @@ pcie-controller { interrupt-map = <0 0 0 0 &mpic 99>; marvell,pcie-port = <2>; marvell,pcie-lane = <0>; + num-lanes = <1>; clocks = <&gateclk 26>; }; @@ -289,6 +304,7 @@ pcie-controller { interrupt-map = <0 0 0 0 &mpic 103>; marvell,pcie-port = <3>; marvell,pcie-lane = <0>; + num-lanes = <1>; clocks = <&gateclk 27>; }; }; diff --git a/dts/Bindings/pci/nvidia,tegra194-pcie-ep.yaml b/dts/Bindings/pci/nvidia,tegra194-pcie-ep.yaml new file mode 100644 index 0000000000..a24fb8307d --- /dev/null +++ b/dts/Bindings/pci/nvidia,tegra194-pcie-ep.yaml @@ -0,0 +1,319 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pci/nvidia,tegra194-pcie-ep.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: NVIDIA Tegra194 (and later) PCIe Endpoint controller (Synopsys DesignWare Core based) + +maintainers: + - Thierry Reding <thierry.reding@gmail.com> + - Jon Hunter <jonathanh@nvidia.com> + - Vidya Sagar <vidyas@nvidia.com> + +description: | + This PCIe controller is based on the Synopsys DesignWare PCIe IP and thus + inherits all the common properties defined in snps,dw-pcie-ep.yaml. Some + of the controller instances are dual mode; they can work either in Root + Port mode or Endpoint mode but one at a time. + + On Tegra194, controllers C0, C4 and C5 support Endpoint mode. + On Tegra234, controllers C5, C6, C7 and C10 support Endpoint mode. + + Note: On Tegra194's P2972-0000 platform, only C5 controller can be enabled to + operate in the Endpoint mode because of the way the platform is designed. + +properties: + compatible: + enum: + - nvidia,tegra194-pcie-ep + - nvidia,tegra234-pcie-ep + + reg: + items: + - description: controller's application logic registers + - description: iATU and DMA registers. This is where the iATU (internal + Address Translation Unit) registers of the PCIe core are made + available for software access. + - description: aperture where the Root Port's own configuration + registers are available. + - description: aperture used to map the remote Root Complex address space + + reg-names: + items: + - const: appl + - const: atu_dma + - const: dbi + - const: addr_space + + interrupts: + items: + - description: controller interrupt + + interrupt-names: + items: + - const: intr + + clocks: + items: + - description: module clock + + clock-names: + items: + - const: core + + resets: + items: + - description: APB bus interface reset + - description: module reset + + reset-names: + items: + - const: apb + - const: core + + reset-gpios: + description: Must contain a phandle to a GPIO controller followed by GPIO + that is being used as PERST input signal. Please refer to pci.txt. + + phys: + minItems: 1 + maxItems: 8 + + phy-names: + minItems: 1 + items: + - const: p2u-0 + - const: p2u-1 + - const: p2u-2 + - const: p2u-3 + - const: p2u-4 + - const: p2u-5 + - const: p2u-6 + - const: p2u-7 + + power-domains: + maxItems: 1 + description: | + A phandle to the node that controls power to the respective PCIe + controller and a specifier name for the PCIe controller. + + Tegra194 specifiers are defined in "include/dt-bindings/power/tegra194-powergate.h" + Tegra234 specifiers are defined in "include/dt-bindings/power/tegra234-powergate.h" + + interconnects: + items: + - description: memory read client + - description: memory write client + + interconnect-names: + items: + - const: dma-mem # read + - const: write + + dma-coherent: true + + nvidia,bpmp: + $ref: /schemas/types.yaml#/definitions/phandle-array + description: | + Must contain a pair of phandles to BPMP controller node followed by + controller ID. Following are the controller IDs for each controller: + + Tegra194 + + 0: C0 + 1: C1 + 2: C2 + 3: C3 + 4: C4 + 5: C5 + + Tegra234 + + 0 : C0 + 1 : C1 + 2 : C2 + 3 : C3 + 4 : C4 + 5 : C5 + 6 : C6 + 7 : C7 + 8 : C8 + 9 : C9 + 10: C10 + + items: + - items: + - description: phandle to BPMP controller node + - description: PCIe controller ID + maximum: 10 + + nvidia,aspm-cmrt-us: + description: Common Mode Restore Time for proper operation of ASPM to be + specified in microseconds + + nvidia,aspm-pwr-on-t-us: + description: Power On time for proper operation of ASPM to be specified in + microseconds + + nvidia,aspm-l0s-entrance-latency-us: + description: ASPM L0s entrance latency to be specified in microseconds + + vddio-pex-ctl-supply: + description: A phandle to the regulator supply for PCIe side band signals + + nvidia,refclk-select-gpios: + maxItems: 1 + description: GPIO used to enable REFCLK to controller from the host + + nvidia,enable-ext-refclk: + description: | + This boolean property needs to be present if the controller is configured + to receive Reference Clock from the host. + NOTE: This is applicable only for Tegra234. + + $ref: /schemas/types.yaml#/definitions/flag + + nvidia,enable-srns: + description: | + This boolean property needs to be present if the controller is + configured to operate in SRNS (Separate Reference Clocks with No + Spread-Spectrum Clocking). NOTE: This is applicable only for + Tegra234. + + $ref: /schemas/types.yaml#/definitions/flag + +allOf: + - $ref: /schemas/pci/snps,dw-pcie-ep.yaml# + +unevaluatedProperties: false + +required: + - interrupts + - interrupt-names + - clocks + - clock-names + - resets + - reset-names + - power-domains + - reset-gpios + - vddio-pex-ctl-supply + - num-lanes + - phys + - phy-names + - nvidia,bpmp + +examples: + - | + #include <dt-bindings/clock/tegra194-clock.h> + #include <dt-bindings/gpio/tegra194-gpio.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/power/tegra194-powergate.h> + #include <dt-bindings/reset/tegra194-reset.h> + + bus@0 { + #address-cells = <2>; + #size-cells = <2>; + ranges = <0x0 0x0 0x0 0x8 0x0>; + + pcie-ep@141a0000 { + compatible = "nvidia,tegra194-pcie-ep"; + reg = <0x00 0x141a0000 0x0 0x00020000>, /* appl registers (128K) */ + <0x00 0x3a040000 0x0 0x00040000>, /* iATU_DMA reg space (256K) */ + <0x00 0x3a080000 0x0 0x00040000>, /* DBI reg space (256K) */ + <0x1c 0x00000000 0x4 0x00000000>; /* Address Space (16G) */ + reg-names = "appl", "atu_dma", "dbi", "addr_space"; + interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>; /* controller interrupt */ + interrupt-names = "intr"; + + clocks = <&bpmp TEGRA194_CLK_PEX1_CORE_5>; + clock-names = "core"; + + resets = <&bpmp TEGRA194_RESET_PEX1_CORE_5_APB>, + <&bpmp TEGRA194_RESET_PEX1_CORE_5>; + reset-names = "apb", "core"; + + power-domains = <&bpmp TEGRA194_POWER_DOMAIN_PCIEX8A>; + pinctrl-names = "default"; + pinctrl-0 = <&clkreq_c5_bi_dir_state>; + + nvidia,bpmp = <&bpmp 5>; + + nvidia,aspm-cmrt-us = <60>; + nvidia,aspm-pwr-on-t-us = <20>; + nvidia,aspm-l0s-entrance-latency-us = <3>; + + vddio-pex-ctl-supply = <&vdd_1v8ao>; + + reset-gpios = <&gpio TEGRA194_MAIN_GPIO(GG, 1) GPIO_ACTIVE_LOW>; + + nvidia,refclk-select-gpios = <&gpio_aon TEGRA194_AON_GPIO(AA, 5) + GPIO_ACTIVE_HIGH>; + + num-lanes = <8>; + + phys = <&p2u_nvhs_0>, <&p2u_nvhs_1>, <&p2u_nvhs_2>, + <&p2u_nvhs_3>, <&p2u_nvhs_4>, <&p2u_nvhs_5>, + <&p2u_nvhs_6>, <&p2u_nvhs_7>; + + phy-names = "p2u-0", "p2u-1", "p2u-2", "p2u-3", "p2u-4", + "p2u-5", "p2u-6", "p2u-7"; + }; + }; + + - | + #include <dt-bindings/clock/tegra234-clock.h> + #include <dt-bindings/gpio/tegra234-gpio.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/power/tegra234-powergate.h> + #include <dt-bindings/reset/tegra234-reset.h> + + bus@0 { + #address-cells = <2>; + #size-cells = <2>; + ranges = <0x0 0x0 0x0 0x8 0x0>; + + pcie-ep@141a0000 { + compatible = "nvidia,tegra234-pcie-ep"; + power-domains = <&bpmp TEGRA234_POWER_DOMAIN_PCIEX8A>; + reg = <0x00 0x141a0000 0x0 0x00020000>, /* appl registers (128K) */ + <0x00 0x3a040000 0x0 0x00040000>, /* iATU_DMA reg space (256K) */ + <0x00 0x3a080000 0x0 0x00040000>, /* DBI reg space (256K) */ + <0x27 0x40000000 0x4 0x00000000>; /* Address Space (16G) */ + reg-names = "appl", "atu_dma", "dbi", "addr_space"; + + interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>; /* controller interrupt */ + interrupt-names = "intr"; + + clocks = <&bpmp TEGRA234_CLK_PEX1_C5_CORE>; + clock-names = "core"; + + resets = <&bpmp TEGRA234_RESET_PEX1_CORE_5_APB>, + <&bpmp TEGRA234_RESET_PEX1_CORE_5>; + reset-names = "apb", "core"; + + nvidia,bpmp = <&bpmp 5>; + + nvidia,enable-ext-refclk; + nvidia,aspm-cmrt-us = <60>; + nvidia,aspm-pwr-on-t-us = <20>; + nvidia,aspm-l0s-entrance-latency-us = <3>; + + vddio-pex-ctl-supply = <&p3701_vdd_1v8_ls>; + + reset-gpios = <&gpio TEGRA234_MAIN_GPIO(AF, 1) GPIO_ACTIVE_LOW>; + + nvidia,refclk-select-gpios = <&gpio_aon + TEGRA234_AON_GPIO(AA, 4) + GPIO_ACTIVE_HIGH>; + + num-lanes = <8>; + + phys = <&p2u_nvhs_0>, <&p2u_nvhs_1>, <&p2u_nvhs_2>, + <&p2u_nvhs_3>, <&p2u_nvhs_4>, <&p2u_nvhs_5>, + <&p2u_nvhs_6>, <&p2u_nvhs_7>; + + phy-names = "p2u-0", "p2u-1", "p2u-2", "p2u-3", "p2u-4", + "p2u-5", "p2u-6", "p2u-7"; + }; + }; diff --git a/dts/Bindings/pci/nvidia,tegra194-pcie.txt b/dts/Bindings/pci/nvidia,tegra194-pcie.txt deleted file mode 100644 index bd43f3c3ec..0000000000 --- a/dts/Bindings/pci/nvidia,tegra194-pcie.txt +++ /dev/null @@ -1,244 +0,0 @@ -NVIDIA Tegra PCIe controller (Synopsys DesignWare Core based) - -This PCIe controller is based on the Synopsis Designware PCIe IP -and thus inherits all the common properties defined in designware-pcie.txt. -Some of the controller instances are dual mode where in they can work either -in root port mode or endpoint mode but one at a time. - -Required properties: -- power-domains: A phandle to the node that controls power to the respective - PCIe controller and a specifier name for the PCIe controller. Following are - the specifiers for the different PCIe controllers - TEGRA194_POWER_DOMAIN_PCIEX8B: C0 - TEGRA194_POWER_DOMAIN_PCIEX1A: C1 - TEGRA194_POWER_DOMAIN_PCIEX1A: C2 - TEGRA194_POWER_DOMAIN_PCIEX1A: C3 - TEGRA194_POWER_DOMAIN_PCIEX4A: C4 - TEGRA194_POWER_DOMAIN_PCIEX8A: C5 - these specifiers are defined in - "include/dt-bindings/power/tegra194-powergate.h" file. -- reg: A list of physical base address and length pairs for each set of - controller registers. Must contain an entry for each entry in the reg-names - property. -- reg-names: Must include the following entries: - "appl": Controller's application logic registers - "config": As per the definition in designware-pcie.txt - "atu_dma": iATU and DMA registers. This is where the iATU (internal Address - Translation Unit) registers of the PCIe core are made available - for SW access. - "dbi": The aperture where root port's own configuration registers are - available -- interrupts: A list of interrupt outputs of the controller. Must contain an - entry for each entry in the interrupt-names property. -- interrupt-names: Must include the following entries: - "intr": The Tegra interrupt that is asserted for controller interrupts -- clocks: Must contain an entry for each entry in clock-names. - See ../clocks/clock-bindings.txt for details. -- clock-names: Must include the following entries: - - core -- resets: Must contain an entry for each entry in reset-names. - See ../reset/reset.txt for details. -- reset-names: Must include the following entries: - - apb - - core -- phys: Must contain a phandle to P2U PHY for each entry in phy-names. -- phy-names: Must include an entry for each active lane. - "p2u-N": where N ranges from 0 to one less than the total number of lanes -- nvidia,bpmp: Must contain a pair of phandle to BPMP controller node followed - by controller-id. Following are the controller ids for each controller. - 0: C0 - 1: C1 - 2: C2 - 3: C3 - 4: C4 - 5: C5 -- vddio-pex-ctl-supply: Regulator supply for PCIe side band signals - -RC mode: -- compatible: Tegra19x must contain "nvidia,tegra194-pcie" -- device_type: Must be "pci" for RC mode -- interrupt-names: Must include the following entries: - "msi": The Tegra interrupt that is asserted when an MSI is received -- bus-range: Range of bus numbers associated with this controller -- #address-cells: Address representation for root ports (must be 3) - - cell 0 specifies the bus and device numbers of the root port: - [23:16]: bus number - [15:11]: device number - - cell 1 denotes the upper 32 address bits and should be 0 - - cell 2 contains the lower 32 address bits and is used to translate to the - CPU address space -- #size-cells: Size representation for root ports (must be 2) -- ranges: Describes the translation of addresses for root ports and standard - PCI regions. The entries must be 7 cells each, where the first three cells - correspond to the address as described for the #address-cells property - above, the fourth and fifth cells are for the physical CPU address to - translate to and the sixth and seventh cells are as described for the - #size-cells property above. - - Entries setup the mapping for the standard I/O, memory and - prefetchable PCI regions. The first cell determines the type of region - that is setup: - - 0x81000000: I/O memory region - - 0x82000000: non-prefetchable memory region - - 0xc2000000: prefetchable memory region - Please refer to the standard PCI bus binding document for a more detailed - explanation. -- #interrupt-cells: Size representation for interrupts (must be 1) -- interrupt-map-mask and interrupt-map: Standard PCI IRQ mapping properties - Please refer to the standard PCI bus binding document for a more detailed - explanation. - -EP mode: -In Tegra194, Only controllers C0, C4 & C5 support EP mode. -- compatible: Tegra19x must contain "nvidia,tegra194-pcie-ep" -- reg-names: Must include the following entries: - "addr_space": Used to map remote RC address space -- reset-gpios: Must contain a phandle to a GPIO controller followed by - GPIO that is being used as PERST input signal. Please refer to pci.txt - document. - -Optional properties: -- pinctrl-names: A list of pinctrl state names. - It is mandatory for C5 controller and optional for other controllers. - - "default": Configures PCIe I/O for proper operation. -- pinctrl-0: phandle for the 'default' state of pin configuration. - It is mandatory for C5 controller and optional for other controllers. -- supports-clkreq: Refer to Documentation/devicetree/bindings/pci/pci.txt -- nvidia,update-fc-fixup: This is a boolean property and needs to be present to - improve performance when a platform is designed in such a way that it - satisfies at least one of the following conditions thereby enabling root - port to exchange optimum number of FC (Flow Control) credits with - downstream devices - 1. If C0/C4/C5 run at x1/x2 link widths (irrespective of speed and MPS) - 2. If C0/C1/C2/C3/C4/C5 operate at their respective max link widths and - a) speed is Gen-2 and MPS is 256B - b) speed is >= Gen-3 with any MPS -- nvidia,aspm-cmrt-us: Common Mode Restore Time for proper operation of ASPM - to be specified in microseconds -- nvidia,aspm-pwr-on-t-us: Power On time for proper operation of ASPM to be - specified in microseconds -- nvidia,aspm-l0s-entrance-latency-us: ASPM L0s entrance latency to be - specified in microseconds - -RC mode: -- vpcie3v3-supply: A phandle to the regulator node that supplies 3.3V to the slot - if the platform has one such slot. (Ex:- x16 slot owned by C5 controller - in p2972-0000 platform). -- vpcie12v-supply: A phandle to the regulator node that supplies 12V to the slot - if the platform has one such slot. (Ex:- x16 slot owned by C5 controller - in p2972-0000 platform). - -EP mode: -- nvidia,refclk-select-gpios: Must contain a phandle to a GPIO controller - followed by GPIO that is being used to enable REFCLK to controller from host - -NOTE:- On Tegra194's P2972-0000 platform, only C5 controller can be enabled to -operate in the endpoint mode because of the way the platform is designed. - -Examples: -========= - -Tegra194 RC mode: ------------------ - - pcie@14180000 { - compatible = "nvidia,tegra194-pcie"; - power-domains = <&bpmp TEGRA194_POWER_DOMAIN_PCIEX8B>; - reg = <0x00 0x14180000 0x0 0x00020000 /* appl registers (128K) */ - 0x00 0x38000000 0x0 0x00040000 /* configuration space (256K) */ - 0x00 0x38040000 0x0 0x00040000>; /* iATU_DMA reg space (256K) */ - reg-names = "appl", "config", "atu_dma"; - - #address-cells = <3>; - #size-cells = <2>; - device_type = "pci"; - num-lanes = <8>; - linux,pci-domain = <0>; - - pinctrl-names = "default"; - pinctrl-0 = <&pex_rst_c5_out_state>, <&clkreq_c5_bi_dir_state>; - - clocks = <&bpmp TEGRA194_CLK_PEX0_CORE_0>; - clock-names = "core"; - - resets = <&bpmp TEGRA194_RESET_PEX0_CORE_0_APB>, - <&bpmp TEGRA194_RESET_PEX0_CORE_0>; - reset-names = "apb", "core"; - - interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>, /* controller interrupt */ - <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>; /* MSI interrupt */ - interrupt-names = "intr", "msi"; - - #interrupt-cells = <1>; - interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &gic GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>; - - nvidia,bpmp = <&bpmp 0>; - - supports-clkreq; - nvidia,aspm-cmrt-us = <60>; - nvidia,aspm-pwr-on-t-us = <20>; - nvidia,aspm-l0s-entrance-latency-us = <3>; - - bus-range = <0x0 0xff>; - ranges = <0x81000000 0x0 0x38100000 0x0 0x38100000 0x0 0x00100000 /* downstream I/O (1MB) */ - 0x82000000 0x0 0x38200000 0x0 0x38200000 0x0 0x01E00000 /* non-prefetchable memory (30MB) */ - 0xc2000000 0x18 0x00000000 0x18 0x00000000 0x4 0x00000000>; /* prefetchable memory (16GB) */ - - vddio-pex-ctl-supply = <&vdd_1v8ao>; - vpcie3v3-supply = <&vdd_3v3_pcie>; - vpcie12v-supply = <&vdd_12v_pcie>; - - phys = <&p2u_hsio_2>, <&p2u_hsio_3>, <&p2u_hsio_4>, - <&p2u_hsio_5>; - phy-names = "p2u-0", "p2u-1", "p2u-2", "p2u-3"; - }; - -Tegra194 EP mode: ------------------ - - pcie_ep@141a0000 { - compatible = "nvidia,tegra194-pcie-ep", "snps,dw-pcie-ep"; - power-domains = <&bpmp TEGRA194_POWER_DOMAIN_PCIEX8A>; - reg = <0x00 0x141a0000 0x0 0x00020000 /* appl registers (128K) */ - 0x00 0x3a040000 0x0 0x00040000 /* iATU_DMA reg space (256K) */ - 0x00 0x3a080000 0x0 0x00040000 /* DBI reg space (256K) */ - 0x1c 0x00000000 0x4 0x00000000>; /* Address Space (16G) */ - reg-names = "appl", "atu_dma", "dbi", "addr_space"; - - num-lanes = <8>; - num-ib-windows = <2>; - num-ob-windows = <8>; - - pinctrl-names = "default"; - pinctrl-0 = <&clkreq_c5_bi_dir_state>; - - clocks = <&bpmp TEGRA194_CLK_PEX1_CORE_5>; - clock-names = "core"; - - resets = <&bpmp TEGRA194_RESET_PEX1_CORE_5_APB>, - <&bpmp TEGRA194_RESET_PEX1_CORE_5>; - reset-names = "apb", "core"; - - interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>; /* controller interrupt */ - interrupt-names = "intr"; - - nvidia,bpmp = <&bpmp 5>; - - nvidia,aspm-cmrt-us = <60>; - nvidia,aspm-pwr-on-t-us = <20>; - nvidia,aspm-l0s-entrance-latency-us = <3>; - - vddio-pex-ctl-supply = <&vdd_1v8ao>; - - reset-gpios = <&gpio TEGRA194_MAIN_GPIO(GG, 1) GPIO_ACTIVE_LOW>; - - nvidia,refclk-select-gpios = <&gpio_aon TEGRA194_AON_GPIO(AA, 5) - GPIO_ACTIVE_HIGH>; - - phys = <&p2u_nvhs_0>, <&p2u_nvhs_1>, <&p2u_nvhs_2>, - <&p2u_nvhs_3>, <&p2u_nvhs_4>, <&p2u_nvhs_5>, - <&p2u_nvhs_6>, <&p2u_nvhs_7>; - - phy-names = "p2u-0", "p2u-1", "p2u-2", "p2u-3", "p2u-4", - "p2u-5", "p2u-6", "p2u-7"; - }; diff --git a/dts/Bindings/pci/nvidia,tegra194-pcie.yaml b/dts/Bindings/pci/nvidia,tegra194-pcie.yaml new file mode 100644 index 0000000000..fe81d52c72 --- /dev/null +++ b/dts/Bindings/pci/nvidia,tegra194-pcie.yaml @@ -0,0 +1,380 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pci/nvidia,tegra194-pcie.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: NVIDIA Tegra194 (and later) PCIe controller (Synopsys DesignWare Core based) + +maintainers: + - Thierry Reding <thierry.reding@gmail.com> + - Jon Hunter <jonathanh@nvidia.com> + - Vidya Sagar <vidyas@nvidia.com> + +description: | + This PCIe controller is based on the Synopsys DesignWare PCIe IP and thus + inherits all the common properties defined in snps,dw-pcie.yaml. Some of + the controller instances are dual mode where in they can work either in + Root Port mode or Endpoint mode but one at a time. + + See nvidia,tegra194-pcie-ep.yaml for details on the Endpoint mode device + tree bindings. + +properties: + compatible: + enum: + - nvidia,tegra194-pcie + - nvidia,tegra234-pcie + + reg: + minItems: 4 + items: + - description: controller's application logic registers + - description: configuration registers + - description: iATU and DMA registers. This is where the iATU (internal + Address Translation Unit) registers of the PCIe core are made + available for software access. + - description: aperture where the Root Port's own configuration + registers are available. + - description: aperture to access the configuration space through ECAM. + + reg-names: + minItems: 4 + items: + - const: appl + - const: config + - const: atu_dma + - const: dbi + - const: ecam + + interrupts: + items: + - description: controller interrupt + - description: MSI interrupt + + interrupt-names: + items: + - const: intr + - const: msi + + clocks: + items: + - description: module clock + + clock-names: + items: + - const: core + + resets: + items: + - description: APB bus interface reset + - description: module reset + + reset-names: + items: + - const: apb + - const: core + + phys: + minItems: 1 + maxItems: 8 + + phy-names: + minItems: 1 + items: + - const: p2u-0 + - const: p2u-1 + - const: p2u-2 + - const: p2u-3 + - const: p2u-4 + - const: p2u-5 + - const: p2u-6 + - const: p2u-7 + + power-domains: + maxItems: 1 + description: | + A phandle to the node that controls power to the respective PCIe + controller and a specifier name for the PCIe controller. + + Tegra194 specifiers defined in "include/dt-bindings/power/tegra194-powergate.h" + Tegra234 specifiers defined in "include/dt-bindings/power/tegra234-powergate.h" + + interconnects: + items: + - description: memory read client + - description: memory write client + + interconnect-names: + items: + - const: dma-mem # read + - const: write + + dma-coherent: true + + nvidia,bpmp: + $ref: /schemas/types.yaml#/definitions/phandle-array + description: | + Must contain a pair of phandles to BPMP controller node followed by + controller ID. Following are the controller IDs for each controller: + + Tegra194 + + 0: C0 + 1: C1 + 2: C2 + 3: C3 + 4: C4 + 5: C5 + + Tegra234 + + 0 : C0 + 1 : C1 + 2 : C2 + 3 : C3 + 4 : C4 + 5 : C5 + 6 : C6 + 7 : C7 + 8 : C8 + 9 : C9 + 10: C10 + + items: + - items: + - description: phandle to BPMP controller node + - description: PCIe controller ID + maximum: 10 + + nvidia,update-fc-fixup: + description: | + This is a boolean property and needs to be present to improve performance + when a platform is designed in such a way that it satisfies at least one + of the following conditions thereby enabling Root Port to exchange + optimum number of FC (Flow Control) credits with downstream devices: + + NOTE: This is applicable only for Tegra194. + + 1. If C0/C4/C5 run at x1/x2 link widths (irrespective of speed and MPS) + 2. If C0/C1/C2/C3/C4/C5 operate at their respective max link widths and + a) speed is Gen-2 and MPS is 256B + b) speed is >= Gen-3 with any MPS + + $ref: /schemas/types.yaml#/definitions/flag + + nvidia,aspm-cmrt-us: + description: Common Mode Restore Time for proper operation of ASPM to be + specified in microseconds + + nvidia,aspm-pwr-on-t-us: + description: Power On time for proper operation of ASPM to be specified in + microseconds + + nvidia,aspm-l0s-entrance-latency-us: + description: ASPM L0s entrance latency to be specified in microseconds + + vddio-pex-ctl-supply: + description: A phandle to the regulator supply for PCIe side band signals. + + vpcie3v3-supply: + description: A phandle to the regulator node that supplies 3.3V to the slot + if the platform has one such slot, e.g., x16 slot owned by C5 controller + in p2972-0000 platform. + + vpcie12v-supply: + description: A phandle to the regulator node that supplies 12V to the slot + if the platform has one such slot, e.g., x16 slot owned by C5 controller + in p2972-0000 platform. + + nvidia,enable-srns: + description: | + This boolean property needs to be present if the controller is + configured to operate in SRNS (Separate Reference Clocks with No + Spread-Spectrum Clocking). NOTE: This is applicable only for + Tegra234. + + $ref: /schemas/types.yaml#/definitions/flag + + nvidia,enable-ext-refclk: + description: | + This boolean property needs to be present if the controller is + configured to use the reference clocking coming in from an external + clock source instead of using the internal clock source. + + $ref: /schemas/types.yaml#/definitions/flag + +allOf: + - $ref: /schemas/pci/snps,dw-pcie.yaml# + - if: + properties: + compatible: + contains: + enum: + - nvidia,tegra194-pcie + then: + properties: + reg: + maxItems: 4 + reg-names: + maxItems: 4 + + - if: + properties: + compatible: + contains: + enum: + - nvidia,tegra234-pcie + then: + properties: + reg: + minItems: 5 + reg-names: + minItems: 5 + +unevaluatedProperties: false + +required: + - interrupts + - interrupt-names + - interrupt-map + - interrupt-map-mask + - clocks + - clock-names + - resets + - reset-names + - power-domains + - vddio-pex-ctl-supply + - num-lanes + - phys + - phy-names + - nvidia,bpmp + +examples: + - | + #include <dt-bindings/clock/tegra194-clock.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/power/tegra194-powergate.h> + #include <dt-bindings/reset/tegra194-reset.h> + + bus@0 { + #address-cells = <2>; + #size-cells = <2>; + ranges = <0x0 0x0 0x0 0x8 0x0>; + + pcie@14180000 { + compatible = "nvidia,tegra194-pcie"; + power-domains = <&bpmp TEGRA194_POWER_DOMAIN_PCIEX8B>; + reg = <0x0 0x14180000 0x0 0x00020000>, /* appl registers (128K) */ + <0x0 0x38000000 0x0 0x00040000>, /* configuration space (256K) */ + <0x0 0x38040000 0x0 0x00040000>, /* iATU_DMA reg space (256K) */ + <0x0 0x38080000 0x0 0x00040000>; /* DBI reg space (256K) */ + reg-names = "appl", "config", "atu_dma", "dbi"; + + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + num-lanes = <8>; + linux,pci-domain = <0>; + + pinctrl-names = "default"; + pinctrl-0 = <&pex_rst_c5_out_state>, <&clkreq_c5_bi_dir_state>; + + clocks = <&bpmp TEGRA194_CLK_PEX0_CORE_0>; + clock-names = "core"; + + resets = <&bpmp TEGRA194_RESET_PEX0_CORE_0_APB>, + <&bpmp TEGRA194_RESET_PEX0_CORE_0>; + reset-names = "apb", "core"; + + interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>, /* controller interrupt */ + <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>; /* MSI interrupt */ + interrupt-names = "intr", "msi"; + + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &gic GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>; + + nvidia,bpmp = <&bpmp 0>; + + supports-clkreq; + nvidia,aspm-cmrt-us = <60>; + nvidia,aspm-pwr-on-t-us = <20>; + nvidia,aspm-l0s-entrance-latency-us = <3>; + + bus-range = <0x0 0xff>; + ranges = <0x81000000 0x0 0x38100000 0x0 0x38100000 0x0 0x00100000>, /* downstream I/O */ + <0x82000000 0x0 0x38200000 0x0 0x38200000 0x0 0x01e00000>, /* non-prefetch memory */ + <0xc2000000 0x18 0x00000000 0x18 0x00000000 0x4 0x00000000>; /* prefetchable memory */ + + vddio-pex-ctl-supply = <&vdd_1v8ao>; + vpcie3v3-supply = <&vdd_3v3_pcie>; + vpcie12v-supply = <&vdd_12v_pcie>; + + phys = <&p2u_hsio_2>, <&p2u_hsio_3>, <&p2u_hsio_4>, + <&p2u_hsio_5>; + phy-names = "p2u-0", "p2u-1", "p2u-2", "p2u-3"; + }; + }; + + - | + #include <dt-bindings/clock/tegra234-clock.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/power/tegra234-powergate.h> + #include <dt-bindings/reset/tegra234-reset.h> + + bus@0 { + #address-cells = <2>; + #size-cells = <2>; + ranges = <0x0 0x0 0x0 0x8 0x0>; + + pcie@14160000 { + compatible = "nvidia,tegra234-pcie"; + power-domains = <&bpmp TEGRA234_POWER_DOMAIN_PCIEX4BB>; + reg = <0x00 0x14160000 0x0 0x00020000>, /* appl registers (128K) */ + <0x00 0x36000000 0x0 0x00040000>, /* configuration space (256K) */ + <0x00 0x36040000 0x0 0x00040000>, /* iATU_DMA reg space (256K) */ + <0x00 0x36080000 0x0 0x00040000>, /* DBI reg space (256K) */ + <0x24 0x30000000 0x0 0x10000000>; /* ECAM (256MB) */ + reg-names = "appl", "config", "atu_dma", "dbi", "ecam"; + + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + num-lanes = <4>; + num-viewport = <8>; + linux,pci-domain = <4>; + + clocks = <&bpmp TEGRA234_CLK_PEX0_C4_CORE>; + clock-names = "core"; + + resets = <&bpmp TEGRA234_RESET_PEX0_CORE_4_APB>, + <&bpmp TEGRA234_RESET_PEX0_CORE_4>; + reset-names = "apb", "core"; + + interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>, /* controller interrupt */ + <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>; /* MSI interrupt */ + interrupt-names = "intr", "msi"; + + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &gic GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>; + + nvidia,bpmp = <&bpmp 4>; + + nvidia,aspm-cmrt-us = <60>; + nvidia,aspm-pwr-on-t-us = <20>; + nvidia,aspm-l0s-entrance-latency-us = <3>; + + bus-range = <0x0 0xff>; + ranges = <0x43000000 0x21 0x40000000 0x21 0x40000000 0x2 0xe8000000>, /* prefetchable */ + <0x02000000 0x0 0x40000000 0x24 0x28000000 0x0 0x08000000>, /* non-prefetchable */ + <0x01000000 0x0 0x36100000 0x00 0x36100000 0x0 0x00100000>; /* downstream I/O */ + + vddio-pex-ctl-supply = <&p3701_vdd_AO_1v8>; + + phys = <&p2u_hsio_4>, <&p2u_hsio_5>, <&p2u_hsio_6>, + <&p2u_hsio_7>; + phy-names = "p2u-0", "p2u-1", "p2u-2", "p2u-3"; + }; + }; diff --git a/dts/Bindings/pci/pci-armada8k.txt b/dts/Bindings/pci/pci-armada8k.txt index 7a813d0e6d..ff25a134be 100644 --- a/dts/Bindings/pci/pci-armada8k.txt +++ b/dts/Bindings/pci/pci-armada8k.txt @@ -1,7 +1,7 @@ * Marvell Armada 7K/8K PCIe interface This PCIe host controller is based on the Synopsys DesignWare PCIe IP -and thus inherits all the common properties defined in designware-pcie.txt. +and thus inherits all the common properties defined in snps,dw-pcie.yaml. Required properties: - compatible: "marvell,armada8k-pcie" diff --git a/dts/Bindings/pci/pci-ep.yaml b/dts/Bindings/pci/pci-ep.yaml index 0f8e575ac0..d1eef48252 100644 --- a/dts/Bindings/pci/pci-ep.yaml +++ b/dts/Bindings/pci/pci-ep.yaml @@ -4,7 +4,7 @@ $id: http://devicetree.org/schemas/pci/pci-ep.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# -title: PCI Endpoint Controller Schema +title: PCI Endpoint Controller description: | Common properties for PCI Endpoint Controller Nodes. @@ -23,6 +23,13 @@ properties: default: 1 maximum: 255 + max-virtual-functions: + description: Array representing the number of virtual functions corresponding to each physical + function + $ref: /schemas/types.yaml#/definitions/uint8-array + minItems: 1 + maxItems: 255 + max-link-speed: $ref: /schemas/types.yaml#/definitions/uint32 enum: [ 1, 2, 3, 4 ] @@ -36,3 +43,5 @@ properties: required: - compatible + +additionalProperties: true diff --git a/dts/Bindings/pci/pci-keystone.txt b/dts/Bindings/pci/pci-keystone.txt deleted file mode 100644 index 47202a2938..0000000000 --- a/dts/Bindings/pci/pci-keystone.txt +++ /dev/null @@ -1,115 +0,0 @@ -TI Keystone PCIe interface - -Keystone PCI host Controller is based on the Synopsys DesignWare PCI -hardware version 3.65. It shares common functions with the PCIe DesignWare -core driver and inherits common properties defined in -Documentation/devicetree/bindings/pci/designware-pcie.txt - -Please refer to Documentation/devicetree/bindings/pci/designware-pcie.txt -for the details of DesignWare DT bindings. Additional properties are -described here as well as properties that are not applicable. - -Required Properties:- - -compatibility: Should be "ti,keystone-pcie" for RC on Keystone2 SoC - Should be "ti,am654-pcie-rc" for RC on AM654x SoC -reg: Three register ranges as listed in the reg-names property -reg-names: "dbics" for the DesignWare PCIe registers, "app" for the - TI specific application registers, "config" for the - configuration space address - -pcie_msi_intc : Interrupt controller device node for MSI IRQ chip - interrupt-cells: should be set to 1 - interrupts: GIC interrupt lines connected to PCI MSI interrupt lines - (required if the compatible is "ti,keystone-pcie") -msi-map: As specified in Documentation/devicetree/bindings/pci/pci-msi.txt - (required if the compatible is "ti,am654-pcie-rc". - -ti,syscon-pcie-id : phandle to the device control module required to set device - id and vendor id. -ti,syscon-pcie-mode : phandle to the device control module required to configure - PCI in either RC mode or EP mode. - - Example: - pcie_msi_intc: msi-interrupt-controller { - interrupt-controller; - #interrupt-cells = <1>; - interrupt-parent = <&gic>; - interrupts = <GIC_SPI 30 IRQ_TYPE_EDGE_RISING>, - <GIC_SPI 31 IRQ_TYPE_EDGE_RISING>, - <GIC_SPI 32 IRQ_TYPE_EDGE_RISING>, - <GIC_SPI 33 IRQ_TYPE_EDGE_RISING>, - <GIC_SPI 34 IRQ_TYPE_EDGE_RISING>, - <GIC_SPI 35 IRQ_TYPE_EDGE_RISING>, - <GIC_SPI 36 IRQ_TYPE_EDGE_RISING>, - <GIC_SPI 37 IRQ_TYPE_EDGE_RISING>; - }; - -pcie_intc: Interrupt controller device node for Legacy IRQ chip - interrupt-cells: should be set to 1 - - Example: - pcie_intc: legacy-interrupt-controller { - interrupt-controller; - #interrupt-cells = <1>; - interrupt-parent = <&gic>; - interrupts = <GIC_SPI 26 IRQ_TYPE_EDGE_RISING>, - <GIC_SPI 27 IRQ_TYPE_EDGE_RISING>, - <GIC_SPI 28 IRQ_TYPE_EDGE_RISING>, - <GIC_SPI 29 IRQ_TYPE_EDGE_RISING>; - }; - -Optional properties:- - phys: phandle to generic Keystone SerDes PHY for PCI - phy-names: name of the generic Keystone SerDes PHY for PCI - - If boot loader already does PCI link establishment, then phys and - phy-names shouldn't be present. - interrupts: platform interrupt for error interrupts. - -DesignWare DT Properties not applicable for Keystone PCI - -1. pcie_bus clock-names not used. Instead, a phandle to phys is used. - -AM654 PCIe Endpoint -=================== - -Required Properties:- - -compatibility: Should be "ti,am654-pcie-ep" for EP on AM654x SoC -reg: Four register ranges as listed in the reg-names property -reg-names: "dbics" for the DesignWare PCIe registers, "app" for the - TI specific application registers, "atu" for the - Address Translation Unit configuration registers and - "addr_space" used to map remote RC address space -num-ib-windows: As specified in - Documentation/devicetree/bindings/pci/designware-pcie.txt -num-ob-windows: As specified in - Documentation/devicetree/bindings/pci/designware-pcie.txt -num-lanes: As specified in - Documentation/devicetree/bindings/pci/designware-pcie.txt -power-domains: As documented by the generic PM domain bindings in - Documentation/devicetree/bindings/power/power_domain.txt. -ti,syscon-pcie-mode: phandle to the device control module required to configure - PCI in either RC mode or EP mode. - -Optional properties:- - -phys: list of PHY specifiers (used by generic PHY framework) -phy-names: must be "pcie-phy0", "pcie-phy1", "pcie-phyN".. based on the - number of lanes as specified in *num-lanes* property. -("phys" and "phy-names" DT bindings are specified in -Documentation/devicetree/bindings/phy/phy-bindings.txt) -interrupts: platform interrupt for error interrupts. - -pcie-ep { - compatible = "ti,am654-pcie-ep"; - reg = <0x5500000 0x1000>, <0x5501000 0x1000>, - <0x10000000 0x8000000>, <0x5506000 0x1000>; - reg-names = "app", "dbics", "addr_space", "atu"; - power-domains = <&k3_pds 120>; - ti,syscon-pcie-mode = <&pcie0_mode>; - num-lanes = <1>; - num-ib-windows = <16>; - num-ob-windows = <16>; - interrupts = <GIC_SPI 340 IRQ_TYPE_EDGE_RISING>; -}; diff --git a/dts/Bindings/pci/pci-rcar-gen2.txt b/dts/Bindings/pci/pci-rcar-gen2.txt deleted file mode 100644 index aeba38f0a3..0000000000 --- a/dts/Bindings/pci/pci-rcar-gen2.txt +++ /dev/null @@ -1,84 +0,0 @@ -Renesas AHB to PCI bridge -------------------------- - -This is the bridge used internally to connect the USB controllers to the -AHB. There is one bridge instance per USB port connected to the internal -OHCI and EHCI controllers. - -Required properties: -- compatible: "renesas,pci-r8a7742" for the R8A7742 SoC; - "renesas,pci-r8a7743" for the R8A7743 SoC; - "renesas,pci-r8a7744" for the R8A7744 SoC; - "renesas,pci-r8a7745" for the R8A7745 SoC; - "renesas,pci-r8a7790" for the R8A7790 SoC; - "renesas,pci-r8a7791" for the R8A7791 SoC; - "renesas,pci-r8a7793" for the R8A7793 SoC; - "renesas,pci-r8a7794" for the R8A7794 SoC; - "renesas,pci-rcar-gen2" for a generic R-Car Gen2 or - RZ/G1 compatible device. - - - When compatible with the generic version, nodes must list the - SoC-specific version corresponding to the platform first - followed by the generic version. - -- reg: A list of physical regions to access the device: the first is - the operational registers for the OHCI/EHCI controllers and the - second is for the bridge configuration and control registers. -- interrupts: interrupt for the device. -- clocks: The reference to the device clock. -- bus-range: The PCI bus number range; as this is a single bus, the range - should be specified as the same value twice. -- #address-cells: must be 3. -- #size-cells: must be 2. -- #interrupt-cells: must be 1. -- interrupt-map: standard property used to define the mapping of the PCI - interrupts to the GIC interrupts. -- interrupt-map-mask: standard property that helps to define the interrupt - mapping. - -Optional properties: -- dma-ranges: a single range for the inbound memory region. If not supplied, - defaults to 1GiB at 0x40000000. Note there are hardware restrictions on the - allowed combinations of address and size. - -Example SoC configuration: - - pci0: pci@ee090000 { - compatible = "renesas,pci-r8a7790", "renesas,pci-rcar-gen2"; - clocks = <&mstp7_clks R8A7790_CLK_EHCI>; - reg = <0x0 0xee090000 0x0 0xc00>, - <0x0 0xee080000 0x0 0x1100>; - interrupts = <0 108 IRQ_TYPE_LEVEL_HIGH>; - status = "disabled"; - - bus-range = <0 0>; - #address-cells = <3>; - #size-cells = <2>; - #interrupt-cells = <1>; - dma-ranges = <0x42000000 0 0x40000000 0 0x40000000 0 0x40000000>; - interrupt-map-mask = <0xff00 0 0 0x7>; - interrupt-map = <0x0000 0 0 1 &gic 0 108 IRQ_TYPE_LEVEL_HIGH - 0x0800 0 0 1 &gic 0 108 IRQ_TYPE_LEVEL_HIGH - 0x1000 0 0 2 &gic 0 108 IRQ_TYPE_LEVEL_HIGH>; - - usb@1,0 { - reg = <0x800 0 0 0 0>; - phys = <&usb0 0>; - phy-names = "usb"; - }; - - usb@2,0 { - reg = <0x1000 0 0 0 0>; - phys = <&usb0 0>; - phy-names = "usb"; - }; - }; - -Example board setup: - -&pci0 { - status = "okay"; - pinctrl-0 = <&usb0_pins>; - pinctrl-names = "default"; -}; diff --git a/dts/Bindings/pci/pcie-al.txt b/dts/Bindings/pci/pcie-al.txt index 557a508922..2ad1fe466e 100644 --- a/dts/Bindings/pci/pcie-al.txt +++ b/dts/Bindings/pci/pcie-al.txt @@ -2,7 +2,7 @@ Amazon's Annapurna Labs PCIe Host Controller is based on the Synopsys DesignWare PCI core. It inherits common properties defined in -Documentation/devicetree/bindings/pci/designware-pcie.txt. +Documentation/devicetree/bindings/pci/snps,dw-pcie.yaml. Properties of the host controller node that differ from it are: diff --git a/dts/Bindings/pci/qcom,pcie-ep.yaml b/dts/Bindings/pci/qcom,pcie-ep.yaml new file mode 100644 index 0000000000..a223ce029c --- /dev/null +++ b/dts/Bindings/pci/qcom,pcie-ep.yaml @@ -0,0 +1,223 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pci/qcom,pcie-ep.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm PCIe Endpoint Controller + +maintainers: + - Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> + +properties: + compatible: + oneOf: + - enum: + - qcom,sdx55-pcie-ep + - qcom,sm8450-pcie-ep + - items: + - const: qcom,sdx65-pcie-ep + - const: qcom,sdx55-pcie-ep + + reg: + items: + - description: Qualcomm-specific PARF configuration registers + - description: DesignWare PCIe registers + - description: External local bus interface registers + - description: Address Translation Unit (ATU) registers + - description: Memory region used to map remote RC address space + - description: BAR memory region + + reg-names: + items: + - const: parf + - const: dbi + - const: elbi + - const: atu + - const: addr_space + - const: mmio + + clocks: + minItems: 7 + maxItems: 8 + + clock-names: + minItems: 7 + maxItems: 8 + + qcom,perst-regs: + description: Reference to a syscon representing TCSR followed by the two + offsets within syscon for Perst enable and Perst separation + enable registers + $ref: /schemas/types.yaml#/definitions/phandle-array + items: + - items: + - description: Syscon to TCSR system registers + - description: Perst enable offset + - description: Perst separation enable offset + + interrupts: + items: + - description: PCIe Global interrupt + - description: PCIe Doorbell interrupt + + interrupt-names: + items: + - const: global + - const: doorbell + + reset-gpios: + description: GPIO used as PERST# input signal + maxItems: 1 + + wake-gpios: + description: GPIO used as WAKE# output signal + maxItems: 1 + + interconnects: + maxItems: 2 + + interconnect-names: + items: + - const: pcie-mem + - const: cpu-pcie + + resets: + maxItems: 1 + + reset-names: + const: core + + power-domains: + maxItems: 1 + + phys: + maxItems: 1 + + phy-names: + const: pciephy + + num-lanes: + default: 2 + +required: + - compatible + - reg + - reg-names + - clocks + - clock-names + - interrupts + - interrupt-names + - reset-gpios + - interconnects + - interconnect-names + - resets + - reset-names + - power-domains + +allOf: + - $ref: pci-ep.yaml# + - if: + properties: + compatible: + contains: + enum: + - qcom,sdx55-pcie-ep + then: + properties: + clocks: + items: + - description: PCIe Auxiliary clock + - description: PCIe CFG AHB clock + - description: PCIe Master AXI clock + - description: PCIe Slave AXI clock + - description: PCIe Slave Q2A AXI clock + - description: PCIe Sleep clock + - description: PCIe Reference clock + clock-names: + items: + - const: aux + - const: cfg + - const: bus_master + - const: bus_slave + - const: slave_q2a + - const: sleep + - const: ref + + - if: + properties: + compatible: + contains: + enum: + - qcom,sm8450-pcie-ep + then: + properties: + clocks: + items: + - description: PCIe Auxiliary clock + - description: PCIe CFG AHB clock + - description: PCIe Master AXI clock + - description: PCIe Slave AXI clock + - description: PCIe Slave Q2A AXI clock + - description: PCIe Reference clock + - description: PCIe DDRSS SF TBU clock + - description: PCIe AGGRE NOC AXI clock + clock-names: + items: + - const: aux + - const: cfg + - const: bus_master + - const: bus_slave + - const: slave_q2a + - const: ref + - const: ddrss_sf_tbu + - const: aggre_noc_axi + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/clock/qcom,gcc-sdx55.h> + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/interconnect/qcom,sdx55.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + + pcie_ep: pcie-ep@1c00000 { + compatible = "qcom,sdx55-pcie-ep"; + reg = <0x01c00000 0x3000>, + <0x40000000 0xf1d>, + <0x40000f20 0xc8>, + <0x40001000 0x1000>, + <0x40002000 0x1000>, + <0x01c03000 0x3000>; + reg-names = "parf", "dbi", "elbi", "atu", "addr_space", + "mmio"; + + clocks = <&gcc GCC_PCIE_AUX_CLK>, + <&gcc GCC_PCIE_CFG_AHB_CLK>, + <&gcc GCC_PCIE_MSTR_AXI_CLK>, + <&gcc GCC_PCIE_SLV_AXI_CLK>, + <&gcc GCC_PCIE_SLV_Q2A_AXI_CLK>, + <&gcc GCC_PCIE_SLEEP_CLK>, + <&gcc GCC_PCIE_0_CLKREF_CLK>; + clock-names = "aux", "cfg", "bus_master", "bus_slave", + "slave_q2a", "sleep", "ref"; + + qcom,perst-regs = <&tcsr 0xb258 0xb270>; + + interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "global", "doorbell"; + interconnects = <&system_noc MASTER_PCIE &mc_virt SLAVE_EBI_CH0>, + <&mem_noc MASTER_AMPSS_M0 &system_noc SLAVE_PCIE_0>; + interconnect-names = "pcie-mem", "cpu-pcie"; + reset-gpios = <&tlmm 57 GPIO_ACTIVE_LOW>; + wake-gpios = <&tlmm 53 GPIO_ACTIVE_LOW>; + resets = <&gcc GCC_PCIE_BCR>; + reset-names = "core"; + power-domains = <&gcc PCIE_GDSC>; + phys = <&pcie0_lane>; + phy-names = "pciephy"; + max-link-speed = <3>; + num-lanes = <2>; + }; diff --git a/dts/Bindings/pci/qcom,pcie.txt b/dts/Bindings/pci/qcom,pcie.txt deleted file mode 100644 index 02bc81bb8b..0000000000 --- a/dts/Bindings/pci/qcom,pcie.txt +++ /dev/null @@ -1,337 +0,0 @@ -* Qualcomm PCI express root complex - -- compatible: - Usage: required - Value type: <stringlist> - Definition: Value should contain - - "qcom,pcie-ipq8064" for ipq8064 - - "qcom,pcie-ipq8064-v2" for ipq8064 rev 2 or ipq8065 - - "qcom,pcie-apq8064" for apq8064 - - "qcom,pcie-apq8084" for apq8084 - - "qcom,pcie-msm8996" for msm8996 or apq8096 - - "qcom,pcie-ipq4019" for ipq4019 - - "qcom,pcie-ipq8074" for ipq8074 - - "qcom,pcie-qcs404" for qcs404 - - "qcom,pcie-sdm845" for sdm845 - -- reg: - Usage: required - Value type: <prop-encoded-array> - Definition: Register ranges as listed in the reg-names property - -- reg-names: - Usage: required - Value type: <stringlist> - Definition: Must include the following entries - - "parf" Qualcomm specific registers - - "dbi" DesignWare PCIe registers - - "elbi" External local bus interface registers - - "config" PCIe configuration space - -- device_type: - Usage: required - Value type: <string> - Definition: Should be "pci". As specified in designware-pcie.txt - -- #address-cells: - Usage: required - Value type: <u32> - Definition: Should be 3. As specified in designware-pcie.txt - -- #size-cells: - Usage: required - Value type: <u32> - Definition: Should be 2. As specified in designware-pcie.txt - -- ranges: - Usage: required - Value type: <prop-encoded-array> - Definition: As specified in designware-pcie.txt - -- interrupts: - Usage: required - Value type: <prop-encoded-array> - Definition: MSI interrupt - -- interrupt-names: - Usage: required - Value type: <stringlist> - Definition: Should contain "msi" - -- #interrupt-cells: - Usage: required - Value type: <u32> - Definition: Should be 1. As specified in designware-pcie.txt - -- interrupt-map-mask: - Usage: required - Value type: <prop-encoded-array> - Definition: As specified in designware-pcie.txt - -- interrupt-map: - Usage: required - Value type: <prop-encoded-array> - Definition: As specified in designware-pcie.txt - -- clocks: - Usage: required - Value type: <prop-encoded-array> - Definition: List of phandle and clock specifier pairs as listed - in clock-names property - -- clock-names: - Usage: required - Value type: <stringlist> - Definition: Should contain the following entries - - "iface" Configuration AHB clock - -- clock-names: - Usage: required for ipq/apq8064 - Value type: <stringlist> - Definition: Should contain the following entries - - "core" Clocks the pcie hw block - - "phy" Clocks the pcie PHY block - - "aux" Clocks the pcie AUX block - - "ref" Clocks the pcie ref block -- clock-names: - Usage: required for apq8084/ipq4019 - Value type: <stringlist> - Definition: Should contain the following entries - - "aux" Auxiliary (AUX) clock - - "bus_master" Master AXI clock - - "bus_slave" Slave AXI clock - -- clock-names: - Usage: required for msm8996/apq8096 - Value type: <stringlist> - Definition: Should contain the following entries - - "pipe" Pipe Clock driving internal logic - - "aux" Auxiliary (AUX) clock - - "cfg" Configuration clock - - "bus_master" Master AXI clock - - "bus_slave" Slave AXI clock - -- clock-names: - Usage: required for ipq8074 - Value type: <stringlist> - Definition: Should contain the following entries - - "iface" PCIe to SysNOC BIU clock - - "axi_m" AXI Master clock - - "axi_s" AXI Slave clock - - "ahb" AHB clock - - "aux" Auxiliary clock - -- clock-names: - Usage: required for qcs404 - Value type: <stringlist> - Definition: Should contain the following entries - - "iface" AHB clock - - "aux" Auxiliary clock - - "master_bus" AXI Master clock - - "slave_bus" AXI Slave clock - --clock-names: - Usage: required for sdm845 - Value type: <stringlist> - Definition: Should contain the following entries - - "aux" Auxiliary clock - - "cfg" Configuration clock - - "bus_master" Master AXI clock - - "bus_slave" Slave AXI clock - - "slave_q2a" Slave Q2A clock - - "tbu" PCIe TBU clock - - "pipe" PIPE clock - -- resets: - Usage: required - Value type: <prop-encoded-array> - Definition: List of phandle and reset specifier pairs as listed - in reset-names property - -- reset-names: - Usage: required for ipq/apq8064 - Value type: <stringlist> - Definition: Should contain the following entries - - "axi" AXI reset - - "ahb" AHB reset - - "por" POR reset - - "pci" PCI reset - - "phy" PHY reset - -- reset-names: - Usage: required for apq8084 - Value type: <stringlist> - Definition: Should contain the following entries - - "core" Core reset - -- reset-names: - Usage: required for ipq/apq8064 - Value type: <stringlist> - Definition: Should contain the following entries - - "axi_m" AXI master reset - - "axi_s" AXI slave reset - - "pipe" PIPE reset - - "axi_m_vmid" VMID reset - - "axi_s_xpu" XPU reset - - "parf" PARF reset - - "phy" PHY reset - - "axi_m_sticky" AXI sticky reset - - "pipe_sticky" PIPE sticky reset - - "pwr" PWR reset - - "ahb" AHB reset - - "phy_ahb" PHY AHB reset - - "ext" EXT reset - -- reset-names: - Usage: required for ipq8074 - Value type: <stringlist> - Definition: Should contain the following entries - - "pipe" PIPE reset - - "sleep" Sleep reset - - "sticky" Core Sticky reset - - "axi_m" AXI Master reset - - "axi_s" AXI Slave reset - - "ahb" AHB Reset - - "axi_m_sticky" AXI Master Sticky reset - -- reset-names: - Usage: required for qcs404 - Value type: <stringlist> - Definition: Should contain the following entries - - "axi_m" AXI Master reset - - "axi_s" AXI Slave reset - - "axi_m_sticky" AXI Master Sticky reset - - "pipe_sticky" PIPE sticky reset - - "pwr" PWR reset - - "ahb" AHB reset - -- reset-names: - Usage: required for sdm845 - Value type: <stringlist> - Definition: Should contain the following entries - - "pci" PCIe core reset - -- power-domains: - Usage: required for apq8084 and msm8996/apq8096 - Value type: <prop-encoded-array> - Definition: A phandle and power domain specifier pair to the - power domain which is responsible for collapsing - and restoring power to the peripheral - -- vdda-supply: - Usage: required - Value type: <phandle> - Definition: A phandle to the core analog power supply - -- vdda_phy-supply: - Usage: required for ipq/apq8064 - Value type: <phandle> - Definition: A phandle to the analog power supply for PHY - -- vdda_refclk-supply: - Usage: required for ipq/apq8064 - Value type: <phandle> - Definition: A phandle to the analog power supply for IC which generates - reference clock -- vddpe-3v3-supply: - Usage: optional - Value type: <phandle> - Definition: A phandle to the PCIe endpoint power supply - -- phys: - Usage: required for apq8084 and qcs404 - Value type: <phandle> - Definition: List of phandle(s) as listed in phy-names property - -- phy-names: - Usage: required for apq8084 and qcs404 - Value type: <stringlist> - Definition: Should contain "pciephy" - -- <name>-gpios: - Usage: optional - Value type: <prop-encoded-array> - Definition: List of phandle and GPIO specifier pairs. Should contain - - "perst-gpios" PCIe endpoint reset signal line - - "wake-gpios" PCIe endpoint wake signal line - -* Example for ipq/apq8064 - pcie@1b500000 { - compatible = "qcom,pcie-apq8064", "qcom,pcie-ipq8064", "snps,dw-pcie"; - reg = <0x1b500000 0x1000 - 0x1b502000 0x80 - 0x1b600000 0x100 - 0x0ff00000 0x100000>; - reg-names = "dbi", "elbi", "parf", "config"; - device_type = "pci"; - linux,pci-domain = <0>; - bus-range = <0x00 0xff>; - num-lanes = <1>; - #address-cells = <3>; - #size-cells = <2>; - ranges = <0x81000000 0 0 0x0fe00000 0 0x00100000 /* I/O */ - 0x82000000 0 0 0x08000000 0 0x07e00000>; /* memory */ - interrupts = <GIC_SPI 238 IRQ_TYPE_NONE>; - interrupt-names = "msi"; - #interrupt-cells = <1>; - interrupt-map-mask = <0 0 0 0x7>; - interrupt-map = <0 0 0 1 &intc 0 36 IRQ_TYPE_LEVEL_HIGH>, /* int_a */ - <0 0 0 2 &intc 0 37 IRQ_TYPE_LEVEL_HIGH>, /* int_b */ - <0 0 0 3 &intc 0 38 IRQ_TYPE_LEVEL_HIGH>, /* int_c */ - <0 0 0 4 &intc 0 39 IRQ_TYPE_LEVEL_HIGH>; /* int_d */ - clocks = <&gcc PCIE_A_CLK>, - <&gcc PCIE_H_CLK>, - <&gcc PCIE_PHY_CLK>, - <&gcc PCIE_AUX_CLK>, - <&gcc PCIE_ALT_REF_CLK>; - clock-names = "core", "iface", "phy", "aux", "ref"; - resets = <&gcc PCIE_ACLK_RESET>, - <&gcc PCIE_HCLK_RESET>, - <&gcc PCIE_POR_RESET>, - <&gcc PCIE_PCI_RESET>, - <&gcc PCIE_PHY_RESET>, - <&gcc PCIE_EXT_RESET>; - reset-names = "axi", "ahb", "por", "pci", "phy", "ext"; - pinctrl-0 = <&pcie_pins_default>; - pinctrl-names = "default"; - }; - -* Example for apq8084 - pcie0@fc520000 { - compatible = "qcom,pcie-apq8084", "snps,dw-pcie"; - reg = <0xfc520000 0x2000>, - <0xff000000 0x1000>, - <0xff001000 0x1000>, - <0xff002000 0x2000>; - reg-names = "parf", "dbi", "elbi", "config"; - device_type = "pci"; - linux,pci-domain = <0>; - bus-range = <0x00 0xff>; - num-lanes = <1>; - #address-cells = <3>; - #size-cells = <2>; - ranges = <0x81000000 0 0 0xff200000 0 0x00100000 /* I/O */ - 0x82000000 0 0x00300000 0xff300000 0 0x00d00000>; /* memory */ - interrupts = <GIC_SPI 243 IRQ_TYPE_NONE>; - interrupt-names = "msi"; - #interrupt-cells = <1>; - interrupt-map-mask = <0 0 0 0x7>; - interrupt-map = <0 0 0 1 &intc 0 244 IRQ_TYPE_LEVEL_HIGH>, /* int_a */ - <0 0 0 2 &intc 0 245 IRQ_TYPE_LEVEL_HIGH>, /* int_b */ - <0 0 0 3 &intc 0 247 IRQ_TYPE_LEVEL_HIGH>, /* int_c */ - <0 0 0 4 &intc 0 248 IRQ_TYPE_LEVEL_HIGH>; /* int_d */ - clocks = <&gcc GCC_PCIE_0_CFG_AHB_CLK>, - <&gcc GCC_PCIE_0_MSTR_AXI_CLK>, - <&gcc GCC_PCIE_0_SLV_AXI_CLK>, - <&gcc GCC_PCIE_0_AUX_CLK>; - clock-names = "iface", "master_bus", "slave_bus", "aux"; - resets = <&gcc GCC_PCIE_0_BCR>; - reset-names = "core"; - power-domains = <&gcc PCIE0_GDSC>; - vdda-supply = <&pma8084_l3>; - phys = <&pciephy0>; - phy-names = "pciephy"; - perst-gpio = <&tlmm 70 GPIO_ACTIVE_LOW>; - pinctrl-0 = <&pcie0_pins_default>; - pinctrl-names = "default"; - }; diff --git a/dts/Bindings/pci/qcom,pcie.yaml b/dts/Bindings/pci/qcom,pcie.yaml new file mode 100644 index 0000000000..a93ab3b540 --- /dev/null +++ b/dts/Bindings/pci/qcom,pcie.yaml @@ -0,0 +1,1038 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pci/qcom,pcie.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm PCI express root complex + +maintainers: + - Bjorn Andersson <bjorn.andersson@linaro.org> + - Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> + +description: | + Qualcomm PCIe root complex controller is based on the Synopsys DesignWare + PCIe IP. + +properties: + compatible: + oneOf: + - enum: + - qcom,pcie-apq8064 + - qcom,pcie-apq8084 + - qcom,pcie-ipq4019 + - qcom,pcie-ipq6018 + - qcom,pcie-ipq8064 + - qcom,pcie-ipq8064-v2 + - qcom,pcie-ipq8074 + - qcom,pcie-ipq8074-gen3 + - qcom,pcie-msm8996 + - qcom,pcie-qcs404 + - qcom,pcie-sa8540p + - qcom,pcie-sa8775p + - qcom,pcie-sc7280 + - qcom,pcie-sc8180x + - qcom,pcie-sc8280xp + - qcom,pcie-sdm845 + - qcom,pcie-sdx55 + - qcom,pcie-sm8150 + - qcom,pcie-sm8250 + - qcom,pcie-sm8350 + - qcom,pcie-sm8450-pcie0 + - qcom,pcie-sm8450-pcie1 + - qcom,pcie-sm8550 + - items: + - enum: + - qcom,pcie-sm8650 + - const: qcom,pcie-sm8550 + - items: + - const: qcom,pcie-msm8998 + - const: qcom,pcie-msm8996 + + reg: + minItems: 4 + maxItems: 6 + + reg-names: + minItems: 4 + maxItems: 6 + + interrupts: + minItems: 1 + maxItems: 8 + + interrupt-names: + minItems: 1 + maxItems: 8 + + iommu-map: + minItems: 1 + maxItems: 16 + + # Common definitions for clocks, clock-names and reset. + # Platform constraints are described later. + clocks: + minItems: 3 + maxItems: 13 + + clock-names: + minItems: 3 + maxItems: 13 + + dma-coherent: true + + interconnects: + maxItems: 2 + + interconnect-names: + items: + - const: pcie-mem + - const: cpu-pcie + + resets: + minItems: 1 + maxItems: 12 + + reset-names: + minItems: 1 + maxItems: 12 + + vdda-supply: + description: A phandle to the core analog power supply + + vdda_phy-supply: + description: A phandle to the core analog power supply for PHY + + vdda_refclk-supply: + description: A phandle to the core analog power supply for IC which generates reference clock + + vddpe-3v3-supply: + description: A phandle to the PCIe endpoint power supply + + phys: + maxItems: 1 + + phy-names: + items: + - const: pciephy + + power-domains: + maxItems: 1 + + perst-gpios: + description: GPIO controlled connection to PERST# signal + maxItems: 1 + + wake-gpios: + description: GPIO controlled connection to WAKE# signal + maxItems: 1 + +required: + - compatible + - reg + - reg-names + - interrupt-map-mask + - interrupt-map + - clocks + - clock-names + +anyOf: + - required: + - interrupts + - interrupt-names + - "#interrupt-cells" + - required: + - msi-map + - msi-map-mask + +allOf: + - $ref: /schemas/pci/pci-bus.yaml# + - if: + properties: + compatible: + contains: + enum: + - qcom,pcie-apq8064 + - qcom,pcie-ipq4019 + - qcom,pcie-ipq8064 + - qcom,pcie-ipq8064v2 + - qcom,pcie-ipq8074 + - qcom,pcie-qcs404 + then: + properties: + reg: + minItems: 4 + maxItems: 4 + reg-names: + items: + - const: dbi # DesignWare PCIe registers + - const: elbi # External local bus interface registers + - const: parf # Qualcomm specific registers + - const: config # PCIe configuration space + + - if: + properties: + compatible: + contains: + enum: + - qcom,pcie-ipq6018 + - qcom,pcie-ipq8074-gen3 + then: + properties: + reg: + minItems: 5 + maxItems: 5 + reg-names: + items: + - const: dbi # DesignWare PCIe registers + - const: elbi # External local bus interface registers + - const: atu # ATU address space + - const: parf # Qualcomm specific registers + - const: config # PCIe configuration space + + - if: + properties: + compatible: + contains: + enum: + - qcom,pcie-apq8084 + - qcom,pcie-msm8996 + - qcom,pcie-sdm845 + then: + properties: + reg: + minItems: 4 + maxItems: 5 + reg-names: + minItems: 4 + items: + - const: parf # Qualcomm specific registers + - const: dbi # DesignWare PCIe registers + - const: elbi # External local bus interface registers + - const: config # PCIe configuration space + - const: mhi # MHI registers + + - if: + properties: + compatible: + contains: + enum: + - qcom,pcie-sa8775p + - qcom,pcie-sc7280 + - qcom,pcie-sc8180x + - qcom,pcie-sc8280xp + - qcom,pcie-sdx55 + - qcom,pcie-sm8250 + - qcom,pcie-sm8350 + - qcom,pcie-sm8450-pcie0 + - qcom,pcie-sm8450-pcie1 + - qcom,pcie-sm8550 + then: + properties: + reg: + minItems: 5 + maxItems: 6 + reg-names: + minItems: 5 + items: + - const: parf # Qualcomm specific registers + - const: dbi # DesignWare PCIe registers + - const: elbi # External local bus interface registers + - const: atu # ATU address space + - const: config # PCIe configuration space + - const: mhi # MHI registers + + - if: + properties: + compatible: + contains: + enum: + - qcom,pcie-apq8064 + - qcom,pcie-ipq8064 + - qcom,pcie-ipq8064v2 + then: + properties: + clocks: + minItems: 3 + maxItems: 5 + clock-names: + minItems: 3 + items: + - const: core # Clocks the pcie hw block + - const: iface # Configuration AHB clock + - const: phy # Clocks the pcie PHY block + - const: aux # Clocks the pcie AUX block, not on apq8064 + - const: ref # Clocks the pcie ref block, not on apq8064 + resets: + minItems: 5 + maxItems: 6 + reset-names: + minItems: 5 + items: + - const: axi # AXI reset + - const: ahb # AHB reset + - const: por # POR reset + - const: pci # PCI reset + - const: phy # PHY reset + - const: ext # EXT reset, not on apq8064 + required: + - vdda-supply + - vdda_phy-supply + - vdda_refclk-supply + + - if: + properties: + compatible: + contains: + enum: + - qcom,pcie-apq8084 + then: + properties: + clocks: + minItems: 4 + maxItems: 4 + clock-names: + items: + - const: iface # Configuration AHB clock + - const: master_bus # Master AXI clock + - const: slave_bus # Slave AXI clock + - const: aux # Auxiliary (AUX) clock + resets: + maxItems: 1 + reset-names: + items: + - const: core # Core reset + + - if: + properties: + compatible: + contains: + enum: + - qcom,pcie-ipq4019 + then: + properties: + clocks: + minItems: 3 + maxItems: 3 + clock-names: + items: + - const: aux # Auxiliary (AUX) clock + - const: master_bus # Master AXI clock + - const: slave_bus # Slave AXI clock + resets: + minItems: 12 + maxItems: 12 + reset-names: + items: + - const: axi_m # AXI master reset + - const: axi_s # AXI slave reset + - const: pipe # PIPE reset + - const: axi_m_vmid # VMID reset + - const: axi_s_xpu # XPU reset + - const: parf # PARF reset + - const: phy # PHY reset + - const: axi_m_sticky # AXI sticky reset + - const: pipe_sticky # PIPE sticky reset + - const: pwr # PWR reset + - const: ahb # AHB reset + - const: phy_ahb # PHY AHB reset + + - if: + properties: + compatible: + contains: + enum: + - qcom,pcie-msm8996 + then: + properties: + clocks: + minItems: 5 + maxItems: 5 + clock-names: + items: + - const: pipe # Pipe Clock driving internal logic + - const: aux # Auxiliary (AUX) clock + - const: cfg # Configuration clock + - const: bus_master # Master AXI clock + - const: bus_slave # Slave AXI clock + resets: false + reset-names: false + + - if: + properties: + compatible: + contains: + enum: + - qcom,pcie-ipq8074 + then: + properties: + clocks: + minItems: 5 + maxItems: 5 + clock-names: + items: + - const: iface # PCIe to SysNOC BIU clock + - const: axi_m # AXI Master clock + - const: axi_s # AXI Slave clock + - const: ahb # AHB clock + - const: aux # Auxiliary clock + resets: + minItems: 7 + maxItems: 7 + reset-names: + items: + - const: pipe # PIPE reset + - const: sleep # Sleep reset + - const: sticky # Core Sticky reset + - const: axi_m # AXI Master reset + - const: axi_s # AXI Slave reset + - const: ahb # AHB Reset + - const: axi_m_sticky # AXI Master Sticky reset + + - if: + properties: + compatible: + contains: + enum: + - qcom,pcie-ipq6018 + - qcom,pcie-ipq8074-gen3 + then: + properties: + clocks: + minItems: 5 + maxItems: 5 + clock-names: + items: + - const: iface # PCIe to SysNOC BIU clock + - const: axi_m # AXI Master clock + - const: axi_s # AXI Slave clock + - const: axi_bridge # AXI bridge clock + - const: rchng + resets: + minItems: 8 + maxItems: 8 + reset-names: + items: + - const: pipe # PIPE reset + - const: sleep # Sleep reset + - const: sticky # Core Sticky reset + - const: axi_m # AXI Master reset + - const: axi_s # AXI Slave reset + - const: ahb # AHB Reset + - const: axi_m_sticky # AXI Master Sticky reset + - const: axi_s_sticky # AXI Slave Sticky reset + + - if: + properties: + compatible: + contains: + enum: + - qcom,pcie-qcs404 + then: + properties: + clocks: + minItems: 4 + maxItems: 4 + clock-names: + items: + - const: iface # AHB clock + - const: aux # Auxiliary clock + - const: master_bus # AXI Master clock + - const: slave_bus # AXI Slave clock + resets: + minItems: 6 + maxItems: 6 + reset-names: + items: + - const: axi_m # AXI Master reset + - const: axi_s # AXI Slave reset + - const: axi_m_sticky # AXI Master Sticky reset + - const: pipe_sticky # PIPE sticky reset + - const: pwr # PWR reset + - const: ahb # AHB reset + + - if: + properties: + compatible: + contains: + enum: + - qcom,pcie-sc7280 + then: + properties: + clocks: + minItems: 13 + maxItems: 13 + clock-names: + items: + - const: pipe # PIPE clock + - const: pipe_mux # PIPE MUX + - const: phy_pipe # PIPE output clock + - const: ref # REFERENCE clock + - const: aux # Auxiliary clock + - const: cfg # Configuration clock + - const: bus_master # Master AXI clock + - const: bus_slave # Slave AXI clock + - const: slave_q2a # Slave Q2A clock + - const: tbu # PCIe TBU clock + - const: ddrss_sf_tbu # PCIe SF TBU clock + - const: aggre0 # Aggre NoC PCIe CENTER SF AXI clock + - const: aggre1 # Aggre NoC PCIe1 AXI clock + resets: + maxItems: 1 + reset-names: + items: + - const: pci # PCIe core reset + + - if: + properties: + compatible: + contains: + enum: + - qcom,pcie-sc8180x + then: + properties: + clocks: + minItems: 8 + maxItems: 8 + clock-names: + items: + - const: pipe # PIPE clock + - const: aux # Auxiliary clock + - const: cfg # Configuration clock + - const: bus_master # Master AXI clock + - const: bus_slave # Slave AXI clock + - const: slave_q2a # Slave Q2A clock + - const: ref # REFERENCE clock + - const: tbu # PCIe TBU clock + resets: + maxItems: 1 + reset-names: + items: + - const: pci # PCIe core reset + + - if: + properties: + compatible: + contains: + enum: + - qcom,pcie-sdm845 + then: + oneOf: + # Unfortunately the "optional" ref clock is used in the middle of the list + - properties: + clocks: + minItems: 8 + maxItems: 8 + clock-names: + items: + - const: pipe # PIPE clock + - const: aux # Auxiliary clock + - const: cfg # Configuration clock + - const: bus_master # Master AXI clock + - const: bus_slave # Slave AXI clock + - const: slave_q2a # Slave Q2A clock + - const: ref # REFERENCE clock + - const: tbu # PCIe TBU clock + - properties: + clocks: + minItems: 7 + maxItems: 7 + clock-names: + items: + - const: pipe # PIPE clock + - const: aux # Auxiliary clock + - const: cfg # Configuration clock + - const: bus_master # Master AXI clock + - const: bus_slave # Slave AXI clock + - const: slave_q2a # Slave Q2A clock + - const: tbu # PCIe TBU clock + properties: + resets: + maxItems: 1 + reset-names: + items: + - const: pci # PCIe core reset + + - if: + properties: + compatible: + contains: + enum: + - qcom,pcie-sm8150 + then: + properties: + clocks: + minItems: 8 + maxItems: 8 + clock-names: + items: + - const: pipe # PIPE clock + - const: aux # Auxiliary clock + - const: cfg # Configuration clock + - const: bus_master # Master AXI clock + - const: bus_slave # Slave AXI clock + - const: slave_q2a # Slave Q2A clock + - const: tbu # PCIe TBU clock + - const: ref # REFERENCE clock + resets: + maxItems: 1 + reset-names: + items: + - const: pci # PCIe core reset + + - if: + properties: + compatible: + contains: + enum: + - qcom,pcie-sm8250 + then: + oneOf: + # Unfortunately the "optional" ref clock is used in the middle of the list + - properties: + clocks: + minItems: 9 + maxItems: 9 + clock-names: + items: + - const: pipe # PIPE clock + - const: aux # Auxiliary clock + - const: cfg # Configuration clock + - const: bus_master # Master AXI clock + - const: bus_slave # Slave AXI clock + - const: slave_q2a # Slave Q2A clock + - const: ref # REFERENCE clock + - const: tbu # PCIe TBU clock + - const: ddrss_sf_tbu # PCIe SF TBU clock + - properties: + clocks: + minItems: 8 + maxItems: 8 + clock-names: + items: + - const: pipe # PIPE clock + - const: aux # Auxiliary clock + - const: cfg # Configuration clock + - const: bus_master # Master AXI clock + - const: bus_slave # Slave AXI clock + - const: slave_q2a # Slave Q2A clock + - const: tbu # PCIe TBU clock + - const: ddrss_sf_tbu # PCIe SF TBU clock + properties: + resets: + maxItems: 1 + reset-names: + items: + - const: pci # PCIe core reset + + - if: + properties: + compatible: + contains: + enum: + - qcom,pcie-sm8350 + then: + properties: + clocks: + minItems: 8 + maxItems: 9 + clock-names: + minItems: 8 + items: + - const: aux # Auxiliary clock + - const: cfg # Configuration clock + - const: bus_master # Master AXI clock + - const: bus_slave # Slave AXI clock + - const: slave_q2a # Slave Q2A clock + - const: tbu # PCIe TBU clock + - const: ddrss_sf_tbu # PCIe SF TBU clock + - const: aggre1 # Aggre NoC PCIe1 AXI clock + - const: aggre0 # Aggre NoC PCIe0 AXI clock + resets: + maxItems: 1 + reset-names: + items: + - const: pci # PCIe core reset + + - if: + properties: + compatible: + contains: + enum: + - qcom,pcie-sm8450-pcie0 + then: + properties: + clocks: + minItems: 12 + maxItems: 12 + clock-names: + items: + - const: pipe # PIPE clock + - const: pipe_mux # PIPE MUX + - const: phy_pipe # PIPE output clock + - const: ref # REFERENCE clock + - const: aux # Auxiliary clock + - const: cfg # Configuration clock + - const: bus_master # Master AXI clock + - const: bus_slave # Slave AXI clock + - const: slave_q2a # Slave Q2A clock + - const: ddrss_sf_tbu # PCIe SF TBU clock + - const: aggre0 # Aggre NoC PCIe0 AXI clock + - const: aggre1 # Aggre NoC PCIe1 AXI clock + resets: + maxItems: 1 + reset-names: + items: + - const: pci # PCIe core reset + + - if: + properties: + compatible: + contains: + enum: + - qcom,pcie-sm8450-pcie1 + then: + properties: + clocks: + minItems: 11 + maxItems: 11 + clock-names: + items: + - const: pipe # PIPE clock + - const: pipe_mux # PIPE MUX + - const: phy_pipe # PIPE output clock + - const: ref # REFERENCE clock + - const: aux # Auxiliary clock + - const: cfg # Configuration clock + - const: bus_master # Master AXI clock + - const: bus_slave # Slave AXI clock + - const: slave_q2a # Slave Q2A clock + - const: ddrss_sf_tbu # PCIe SF TBU clock + - const: aggre1 # Aggre NoC PCIe1 AXI clock + resets: + maxItems: 1 + reset-names: + items: + - const: pci # PCIe core reset + + - if: + properties: + compatible: + contains: + enum: + - qcom,pcie-sm8550 + then: + properties: + clocks: + minItems: 7 + maxItems: 8 + clock-names: + minItems: 7 + items: + - const: aux # Auxiliary clock + - const: cfg # Configuration clock + - const: bus_master # Master AXI clock + - const: bus_slave # Slave AXI clock + - const: slave_q2a # Slave Q2A clock + - const: ddrss_sf_tbu # PCIe SF TBU clock + - const: noc_aggr # Aggre NoC PCIe AXI clock + - const: cnoc_sf_axi # Config NoC PCIe1 AXI clock + resets: + minItems: 1 + maxItems: 2 + reset-names: + minItems: 1 + items: + - const: pci # PCIe core reset + - const: link_down # PCIe link down reset + + - if: + properties: + compatible: + contains: + enum: + - qcom,pcie-sa8540p + - qcom,pcie-sc8280xp + then: + properties: + clocks: + minItems: 8 + maxItems: 9 + clock-names: + minItems: 8 + items: + - const: aux # Auxiliary clock + - const: cfg # Configuration clock + - const: bus_master # Master AXI clock + - const: bus_slave # Slave AXI clock + - const: slave_q2a # Slave Q2A clock + - const: ddrss_sf_tbu # PCIe SF TBU clock + - const: noc_aggr_4 # NoC aggregate 4 clock + - const: noc_aggr_south_sf # NoC aggregate South SF clock + - const: cnoc_qx # Configuration NoC QX clock + resets: + maxItems: 1 + reset-names: + items: + - const: pci # PCIe core reset + + - if: + properties: + compatible: + contains: + enum: + - qcom,pcie-sdx55 + then: + properties: + clocks: + minItems: 7 + maxItems: 7 + clock-names: + items: + - const: pipe # PIPE clock + - const: aux # Auxiliary clock + - const: cfg # Configuration clock + - const: bus_master # Master AXI clock + - const: bus_slave # Slave AXI clock + - const: slave_q2a # Slave Q2A clock + - const: sleep # PCIe Sleep clock + resets: + maxItems: 1 + reset-names: + items: + - const: pci # PCIe core reset + + - if: + properties: + compatible: + contains: + enum: + - qcom,pcie-sa8775p + then: + properties: + clocks: + minItems: 5 + maxItems: 5 + clock-names: + items: + - const: aux # Auxiliary clock + - const: cfg # Configuration clock + - const: bus_master # Master AXI clock + - const: bus_slave # Slave AXI clock + - const: slave_q2a # Slave Q2A clock + resets: + maxItems: 1 + reset-names: + items: + - const: pci # PCIe core reset + + - if: + properties: + compatible: + contains: + enum: + - qcom,pcie-sa8540p + - qcom,pcie-sa8775p + - qcom,pcie-sc8280xp + then: + required: + - interconnects + - interconnect-names + + - if: + not: + properties: + compatible: + contains: + enum: + - qcom,pcie-apq8064 + - qcom,pcie-ipq4019 + - qcom,pcie-ipq8064 + - qcom,pcie-ipq8064v2 + - qcom,pcie-ipq8074 + - qcom,pcie-ipq8074-gen3 + - qcom,pcie-qcs404 + then: + required: + - power-domains + + - if: + not: + properties: + compatible: + contains: + enum: + - qcom,pcie-msm8996 + then: + required: + - resets + - reset-names + + - if: + properties: + compatible: + contains: + enum: + - qcom,pcie-msm8996 + - qcom,pcie-sa8775p + - qcom,pcie-sc7280 + - qcom,pcie-sc8180x + - qcom,pcie-sdm845 + - qcom,pcie-sm8150 + - qcom,pcie-sm8250 + - qcom,pcie-sm8350 + - qcom,pcie-sm8450-pcie0 + - qcom,pcie-sm8450-pcie1 + - qcom,pcie-sm8550 + then: + oneOf: + - properties: + interrupts: + maxItems: 1 + interrupt-names: + items: + - const: msi + - properties: + interrupts: + minItems: 8 + interrupt-names: + items: + - const: msi0 + - const: msi1 + - const: msi2 + - const: msi3 + - const: msi4 + - const: msi5 + - const: msi6 + - const: msi7 + + - if: + properties: + compatible: + contains: + enum: + - qcom,pcie-sc8280xp + then: + properties: + interrupts: + minItems: 4 + maxItems: 4 + interrupt-names: + items: + - const: msi0 + - const: msi1 + - const: msi2 + - const: msi3 + + - if: + properties: + compatible: + contains: + enum: + - qcom,pcie-apq8064 + - qcom,pcie-apq8084 + - qcom,pcie-ipq4019 + - qcom,pcie-ipq6018 + - qcom,pcie-ipq8064 + - qcom,pcie-ipq8064-v2 + - qcom,pcie-ipq8074 + - qcom,pcie-ipq8074-gen3 + - qcom,pcie-qcs404 + - qcom,pcie-sa8540p + then: + properties: + interrupts: + maxItems: 1 + interrupt-names: + items: + - const: msi + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + pcie@1b500000 { + compatible = "qcom,pcie-ipq8064"; + reg = <0x1b500000 0x1000>, + <0x1b502000 0x80>, + <0x1b600000 0x100>, + <0x0ff00000 0x100000>; + reg-names = "dbi", "elbi", "parf", "config"; + device_type = "pci"; + linux,pci-domain = <0>; + bus-range = <0x00 0xff>; + num-lanes = <1>; + #address-cells = <3>; + #size-cells = <2>; + ranges = <0x81000000 0 0 0x0fe00000 0 0x00100000>, + <0x82000000 0 0 0x08000000 0 0x07e00000>; + interrupts = <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "msi"; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0x7>; + interrupt-map = <0 0 0 1 &intc 0 36 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 2 &intc 0 37 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 3 &intc 0 38 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 4 &intc 0 39 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc 41>, + <&gcc 43>, + <&gcc 44>, + <&gcc 42>, + <&gcc 248>; + clock-names = "core", "iface", "phy", "aux", "ref"; + resets = <&gcc 27>, + <&gcc 26>, + <&gcc 25>, + <&gcc 24>, + <&gcc 23>, + <&gcc 22>; + reset-names = "axi", "ahb", "por", "pci", "phy", "ext"; + pinctrl-0 = <&pcie_pins_default>; + pinctrl-names = "default"; + vdda-supply = <&pm8921_s3>; + vdda_phy-supply = <&pm8921_lvs6>; + vdda_refclk-supply = <&ext_3p3v>; + }; + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/gpio/gpio.h> + pcie@fc520000 { + compatible = "qcom,pcie-apq8084"; + reg = <0xfc520000 0x2000>, + <0xff000000 0x1000>, + <0xff001000 0x1000>, + <0xff002000 0x2000>; + reg-names = "parf", "dbi", "elbi", "config"; + device_type = "pci"; + linux,pci-domain = <0>; + bus-range = <0x00 0xff>; + num-lanes = <1>; + #address-cells = <3>; + #size-cells = <2>; + ranges = <0x81000000 0 0 0xff200000 0 0x00100000>, + <0x82000000 0 0x00300000 0xff300000 0 0x00d00000>; + interrupts = <GIC_SPI 243 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "msi"; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0x7>; + interrupt-map = <0 0 0 1 &intc 0 244 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 2 &intc 0 245 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 3 &intc 0 247 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 4 &intc 0 248 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc 324>, + <&gcc 325>, + <&gcc 327>, + <&gcc 323>; + clock-names = "iface", "master_bus", "slave_bus", "aux"; + resets = <&gcc 81>; + reset-names = "core"; + power-domains = <&gcc 1>; + vdda-supply = <&pma8084_l3>; + phys = <&pciephy0>; + phy-names = "pciephy"; + perst-gpios = <&tlmm 70 GPIO_ACTIVE_LOW>; + pinctrl-0 = <&pcie0_pins_default>; + pinctrl-names = "default"; + }; +... diff --git a/dts/Bindings/pci/rcar-gen4-pci-ep.yaml b/dts/Bindings/pci/rcar-gen4-pci-ep.yaml new file mode 100644 index 0000000000..fe38f62da0 --- /dev/null +++ b/dts/Bindings/pci/rcar-gen4-pci-ep.yaml @@ -0,0 +1,115 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +# Copyright (C) 2022-2023 Renesas Electronics Corp. +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pci/rcar-gen4-pci-ep.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Renesas R-Car Gen4 PCIe Endpoint + +maintainers: + - Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> + +allOf: + - $ref: snps,dw-pcie-ep.yaml# + +properties: + compatible: + items: + - const: renesas,r8a779f0-pcie-ep # R-Car S4-8 + - const: renesas,rcar-gen4-pcie-ep # R-Car Gen4 + + reg: + maxItems: 7 + + reg-names: + items: + - const: dbi + - const: dbi2 + - const: atu + - const: dma + - const: app + - const: phy + - const: addr_space + + interrupts: + maxItems: 3 + + interrupt-names: + items: + - const: dma + - const: sft_ce + - const: app + + clocks: + maxItems: 2 + + clock-names: + items: + - const: core + - const: ref + + power-domains: + maxItems: 1 + + resets: + maxItems: 1 + + reset-names: + items: + - const: pwr + + max-link-speed: + maximum: 4 + + num-lanes: + maximum: 4 + + max-functions: + maximum: 2 + +required: + - compatible + - reg + - reg-names + - interrupts + - interrupt-names + - clocks + - clock-names + - power-domains + - resets + - reset-names + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/clock/r8a779f0-cpg-mssr.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/power/r8a779f0-sysc.h> + + soc { + #address-cells = <2>; + #size-cells = <2>; + + pcie0_ep: pcie-ep@e65d0000 { + compatible = "renesas,r8a779f0-pcie-ep", "renesas,rcar-gen4-pcie-ep"; + reg = <0 0xe65d0000 0 0x2000>, <0 0xe65d2000 0 0x1000>, + <0 0xe65d3000 0 0x2000>, <0 0xe65d5000 0 0x1200>, + <0 0xe65d6200 0 0x0e00>, <0 0xe65d7000 0 0x0400>, + <0 0xfe000000 0 0x400000>; + reg-names = "dbi", "dbi2", "atu", "dma", "app", "phy", "addr_space"; + interrupts = <GIC_SPI 417 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "dma", "sft_ce", "app"; + clocks = <&cpg CPG_MOD 624>, <&pcie0_clkref>; + clock-names = "core", "ref"; + power-domains = <&sysc R8A779F0_PD_ALWAYS_ON>; + resets = <&cpg 624>; + reset-names = "pwr"; + max-link-speed = <4>; + num-lanes = <2>; + max-functions = /bits/ 8 <2>; + }; + }; diff --git a/dts/Bindings/pci/rcar-gen4-pci-host.yaml b/dts/Bindings/pci/rcar-gen4-pci-host.yaml new file mode 100644 index 0000000000..ffb34339b6 --- /dev/null +++ b/dts/Bindings/pci/rcar-gen4-pci-host.yaml @@ -0,0 +1,127 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +# Copyright (C) 2022-2023 Renesas Electronics Corp. +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pci/rcar-gen4-pci-host.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Renesas R-Car Gen4 PCIe Host + +maintainers: + - Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> + +allOf: + - $ref: snps,dw-pcie.yaml# + +properties: + compatible: + items: + - const: renesas,r8a779f0-pcie # R-Car S4-8 + - const: renesas,rcar-gen4-pcie # R-Car Gen4 + + reg: + maxItems: 7 + + reg-names: + items: + - const: dbi + - const: dbi2 + - const: atu + - const: dma + - const: app + - const: phy + - const: config + + interrupts: + maxItems: 4 + + interrupt-names: + items: + - const: msi + - const: dma + - const: sft_ce + - const: app + + clocks: + maxItems: 2 + + clock-names: + items: + - const: core + - const: ref + + power-domains: + maxItems: 1 + + resets: + maxItems: 1 + + reset-names: + items: + - const: pwr + + max-link-speed: + maximum: 4 + + num-lanes: + maximum: 4 + +required: + - compatible + - reg + - reg-names + - interrupts + - interrupt-names + - clocks + - clock-names + - power-domains + - resets + - reset-names + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/clock/r8a779f0-cpg-mssr.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/power/r8a779f0-sysc.h> + + soc { + #address-cells = <2>; + #size-cells = <2>; + + pcie: pcie@e65d0000 { + compatible = "renesas,r8a779f0-pcie", "renesas,rcar-gen4-pcie"; + reg = <0 0xe65d0000 0 0x1000>, <0 0xe65d2000 0 0x0800>, + <0 0xe65d3000 0 0x2000>, <0 0xe65d5000 0 0x1200>, + <0 0xe65d6200 0 0x0e00>, <0 0xe65d7000 0 0x0400>, + <0 0xfe000000 0 0x400000>; + reg-names = "dbi", "dbi2", "atu", "dma", "app", "phy", "config"; + interrupts = <GIC_SPI 416 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 417 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "msi", "dma", "sft_ce", "app"; + clocks = <&cpg CPG_MOD 624>, <&pcie0_clkref>; + clock-names = "core", "ref"; + power-domains = <&sysc R8A779F0_PD_ALWAYS_ON>; + resets = <&cpg 624>; + reset-names = "pwr"; + max-link-speed = <4>; + num-lanes = <2>; + #address-cells = <3>; + #size-cells = <2>; + bus-range = <0x00 0xff>; + device_type = "pci"; + ranges = <0x01000000 0 0x00000000 0 0xfe000000 0 0x00400000>, + <0x02000000 0 0x30000000 0 0x30000000 0 0x10000000>; + dma-ranges = <0x42000000 0 0x00000000 0 0x00000000 1 0x00000000>; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 7>; + interrupt-map = <0 0 0 1 &gic GIC_SPI 416 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 2 &gic GIC_SPI 416 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 3 &gic GIC_SPI 416 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 4 &gic GIC_SPI 416 IRQ_TYPE_LEVEL_HIGH>; + snps,enable-cdm-check; + }; + }; diff --git a/dts/Bindings/pci/rcar-pci-ep.yaml b/dts/Bindings/pci/rcar-pci-ep.yaml index aa483c7f27..32a3b7665f 100644 --- a/dts/Bindings/pci/rcar-pci-ep.yaml +++ b/dts/Bindings/pci/rcar-pci-ep.yaml @@ -14,8 +14,13 @@ maintainers: properties: compatible: items: - - const: renesas,r8a774c0-pcie-ep - - const: renesas,rcar-gen3-pcie-ep + - enum: + - renesas,r8a774a1-pcie-ep # RZ/G2M + - renesas,r8a774b1-pcie-ep # RZ/G2N + - renesas,r8a774c0-pcie-ep # RZ/G2E + - renesas,r8a774e1-pcie-ep # RZ/G2H + - renesas,r8a7795-pcie-ep # R-Car H3 + - const: renesas,rcar-gen3-pcie-ep # R-Car Gen3 and RZ/G2 reg: maxItems: 5 @@ -28,6 +33,10 @@ properties: - const: memory2 - const: memory3 + interrupts: + minItems: 3 + maxItems: 3 + power-domains: maxItems: 1 @@ -49,15 +58,19 @@ required: - compatible - reg - reg-names + - interrupts - resets - power-domains - clocks - clock-names - max-functions +additionalProperties: false + examples: - | #include <dt-bindings/clock/r8a774c0-cpg-mssr.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/power/r8a774c0-sysc.h> pcie0_ep: pcie-ep@fe000000 { @@ -69,6 +82,9 @@ examples: <0x30000000 0x8000000>, <0x38000000 0x8000000>; reg-names = "apb-base", "memory0", "memory1", "memory2", "memory3"; + interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>; resets = <&cpg 319>; power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>; clocks = <&cpg CPG_MOD 319>; diff --git a/dts/Bindings/pci/rcar-pci-host.yaml b/dts/Bindings/pci/rcar-pci-host.yaml new file mode 100644 index 0000000000..b6a7cb32f6 --- /dev/null +++ b/dts/Bindings/pci/rcar-pci-host.yaml @@ -0,0 +1,136 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +# Copyright (C) 2020 Renesas Electronics Corp. +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pci/rcar-pci-host.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Renesas R-Car PCIe Host + +maintainers: + - Marek Vasut <marek.vasut+renesas@gmail.com> + - Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> + +allOf: + - $ref: pci-bus.yaml# + +properties: + compatible: + oneOf: + - const: renesas,pcie-r8a7779 # R-Car H1 + - items: + - enum: + - renesas,pcie-r8a7742 # RZ/G1H + - renesas,pcie-r8a7743 # RZ/G1M + - renesas,pcie-r8a7744 # RZ/G1N + - renesas,pcie-r8a7790 # R-Car H2 + - renesas,pcie-r8a7791 # R-Car M2-W + - renesas,pcie-r8a7793 # R-Car M2-N + - const: renesas,pcie-rcar-gen2 # R-Car Gen2 and RZ/G1 + - items: + - enum: + - renesas,pcie-r8a774a1 # RZ/G2M + - renesas,pcie-r8a774b1 # RZ/G2N + - renesas,pcie-r8a774c0 # RZ/G2E + - renesas,pcie-r8a774e1 # RZ/G2H + - renesas,pcie-r8a7795 # R-Car H3 + - renesas,pcie-r8a7796 # R-Car M3-W + - renesas,pcie-r8a77961 # R-Car M3-W+ + - renesas,pcie-r8a77965 # R-Car M3-N + - renesas,pcie-r8a77980 # R-Car V3H + - renesas,pcie-r8a77990 # R-Car E3 + - const: renesas,pcie-rcar-gen3 # R-Car Gen3 and RZ/G2 + + reg: + maxItems: 1 + + interrupts: + minItems: 3 + maxItems: 3 + + clocks: + maxItems: 2 + + clock-names: + items: + - const: pcie + - const: pcie_bus + + power-domains: + maxItems: 1 + + resets: + maxItems: 1 + + phys: + maxItems: 1 + + phy-names: + const: pcie + + vpcie1v5-supply: + description: The 1.5v regulator to use for PCIe. + + vpcie3v3-supply: + description: The 3.3v regulator to use for PCIe. + + vpcie12v-supply: + description: The 12v regulator to use for PCIe. + +required: + - compatible + - reg + - interrupts + - clocks + - clock-names + - power-domains + +if: + not: + properties: + compatible: + contains: + const: renesas,pcie-r8a7779 +then: + required: + - resets + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/clock/r8a7791-cpg-mssr.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/power/r8a7791-sysc.h> + + soc { + #address-cells = <2>; + #size-cells = <2>; + + pcie: pcie@fe000000 { + compatible = "renesas,pcie-r8a7791", "renesas,pcie-rcar-gen2"; + reg = <0 0xfe000000 0 0x80000>; + #address-cells = <3>; + #size-cells = <2>; + bus-range = <0x00 0xff>; + device_type = "pci"; + ranges = <0x01000000 0 0x00000000 0 0xfe100000 0 0x00100000>, + <0x02000000 0 0xfe200000 0 0xfe200000 0 0x00200000>, + <0x02000000 0 0x30000000 0 0x30000000 0 0x08000000>, + <0x42000000 0 0x38000000 0 0x38000000 0 0x08000000>; + dma-ranges = <0x42000000 0 0x40000000 0 0x40000000 0 0x40000000>, + <0x42000000 2 0x00000000 2 0x00000000 0 0x40000000>; + interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &gic GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 319>, <&pcie_bus_clk>; + clock-names = "pcie", "pcie_bus"; + power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; + resets = <&cpg 319>; + vpcie3v3-supply = <&pcie_3v3>; + vpcie12v-supply = <&pcie_12v>; + }; + }; diff --git a/dts/Bindings/pci/rcar-pci.txt b/dts/Bindings/pci/rcar-pci.txt deleted file mode 100644 index 1041c44a61..0000000000 --- a/dts/Bindings/pci/rcar-pci.txt +++ /dev/null @@ -1,71 +0,0 @@ -* Renesas R-Car PCIe interface - -Required properties: -compatible: "renesas,pcie-r8a7743" for the R8A7743 SoC; - "renesas,pcie-r8a7744" for the R8A7744 SoC; - "renesas,pcie-r8a774a1" for the R8A774A1 SoC; - "renesas,pcie-r8a774b1" for the R8A774B1 SoC; - "renesas,pcie-r8a774c0" for the R8A774C0 SoC; - "renesas,pcie-r8a7779" for the R8A7779 SoC; - "renesas,pcie-r8a7790" for the R8A7790 SoC; - "renesas,pcie-r8a7791" for the R8A7791 SoC; - "renesas,pcie-r8a7793" for the R8A7793 SoC; - "renesas,pcie-r8a7795" for the R8A7795 SoC; - "renesas,pcie-r8a7796" for the R8A77960 SoC; - "renesas,pcie-r8a77961" for the R8A77961 SoC; - "renesas,pcie-r8a77980" for the R8A77980 SoC; - "renesas,pcie-r8a77990" for the R8A77990 SoC; - "renesas,pcie-rcar-gen2" for a generic R-Car Gen2 or - RZ/G1 compatible device. - "renesas,pcie-rcar-gen3" for a generic R-Car Gen3 or - RZ/G2 compatible device. - - When compatible with the generic version, nodes must list the - SoC-specific version corresponding to the platform first - followed by the generic version. - -- reg: base address and length of the PCIe controller registers. -- #address-cells: set to <3> -- #size-cells: set to <2> -- bus-range: PCI bus numbers covered -- device_type: set to "pci" -- ranges: ranges for the PCI memory and I/O regions. -- dma-ranges: ranges for the inbound memory regions. -- interrupts: two interrupt sources for MSI interrupts, followed by interrupt - source for hardware related interrupts (e.g. link speed change). -- #interrupt-cells: set to <1> -- interrupt-map-mask and interrupt-map: standard PCI properties - to define the mapping of the PCIe interface to interrupt numbers. -- clocks: from common clock binding: clock specifiers for the PCIe controller - and PCIe bus clocks. -- clock-names: from common clock binding: should be "pcie" and "pcie_bus". - -Optional properties: -- phys: from common PHY binding: PHY phandle and specifier (only make sense - for R-Car gen3 SoCs where the PCIe PHYs have their own register blocks). -- phy-names: from common PHY binding: should be "pcie". - -Example: - -SoC-specific DT Entry: - - pcie: pcie@fe000000 { - compatible = "renesas,pcie-r8a7791", "renesas,pcie-rcar-gen2"; - reg = <0 0xfe000000 0 0x80000>; - #address-cells = <3>; - #size-cells = <2>; - bus-range = <0x00 0xff>; - device_type = "pci"; - ranges = <0x01000000 0 0x00000000 0 0xfe100000 0 0x00100000 - 0x02000000 0 0xfe200000 0 0xfe200000 0 0x00200000 - 0x02000000 0 0x30000000 0 0x30000000 0 0x08000000 - 0x42000000 0 0x38000000 0 0x38000000 0 0x08000000>; - dma-ranges = <0x42000000 0 0x40000000 0 0x40000000 0 0x40000000 - 0x42000000 2 0x00000000 2 0x00000000 0 0x40000000>; - interrupts = <0 116 4>, <0 117 4>, <0 118 4>; - #interrupt-cells = <1>; - interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &gic 0 116 4>; - clocks = <&mstp3_clks R8A7791_CLK_PCIE>, <&pcie_bus_clk>; - clock-names = "pcie", "pcie_bus"; - }; diff --git a/dts/Bindings/pci/renesas,pci-rcar-gen2.yaml b/dts/Bindings/pci/renesas,pci-rcar-gen2.yaml new file mode 100644 index 0000000000..5a0d64d3ae --- /dev/null +++ b/dts/Bindings/pci/renesas,pci-rcar-gen2.yaml @@ -0,0 +1,186 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pci/renesas,pci-rcar-gen2.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Renesas AHB to PCI bridge + +maintainers: + - Marek Vasut <marek.vasut+renesas@gmail.com> + - Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> + +description: | + This is the bridge used internally to connect the USB controllers to the + AHB. There is one bridge instance per USB port connected to the internal + OHCI and EHCI controllers. + +properties: + compatible: + oneOf: + - items: + - enum: + - renesas,pci-r8a7742 # RZ/G1H + - renesas,pci-r8a7743 # RZ/G1M + - renesas,pci-r8a7744 # RZ/G1N + - renesas,pci-r8a7745 # RZ/G1E + - renesas,pci-r8a7790 # R-Car H2 + - renesas,pci-r8a7791 # R-Car M2-W + - renesas,pci-r8a7793 # R-Car M2-N + - renesas,pci-r8a7794 # R-Car E2 + - const: renesas,pci-rcar-gen2 # R-Car Gen2 and RZ/G1 + - items: + - enum: + - renesas,pci-r9a06g032 # RZ/N1D + - const: renesas,pci-rzn1 # RZ/N1 + + reg: + items: + - description: Operational registers for the OHCI/EHCI controllers. + - description: Bridge configuration and control registers. + + interrupts: + maxItems: 1 + + clocks: true + + clock-names: true + + resets: + maxItems: 1 + + power-domains: + maxItems: 1 + + bus-range: + description: | + The PCI bus number range; as this is a single bus, the range + should be specified as the same value twice. + + dma-ranges: + description: | + A single range for the inbound memory region. If not supplied, + defaults to 1GiB at 0x40000000. Note there are hardware restrictions on + the allowed combinations of address and size. + maxItems: 1 + +patternProperties: + '^usb@[0-1],0$': + type: object + + description: + This a USB controller PCI device + + properties: + reg: + description: + Identify the correct bus, device and function number in the + form <bdf 0 0 0 0>. + + items: + minItems: 5 + maxItems: 5 + + phys: + description: + Reference to the USB phy + maxItems: 1 + + phy-names: + maxItems: 1 + + required: + - reg + - phys + - phy-names + + unevaluatedProperties: false + +required: + - compatible + - reg + - interrupts + - interrupt-map + - interrupt-map-mask + - clocks + - power-domains + - bus-range + - "#address-cells" + - "#size-cells" + - "#interrupt-cells" + +allOf: + - $ref: /schemas/pci/pci-bus.yaml# + + - if: + properties: + compatible: + contains: + enum: + - renesas,pci-rzn1 + then: + properties: + clocks: + items: + - description: Internal bus clock (AHB) for HOST + - description: Internal bus clock (AHB) Power Management + - description: PCI clock for USB subsystem + clock-names: + items: + - const: hclkh + - const: hclkpm + - const: pciclk + required: + - clock-names + else: + properties: + clocks: + items: + - description: Device clock + clock-names: + items: + - const: pclk + required: + - resets + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/clock/r8a7790-cpg-mssr.h> + #include <dt-bindings/power/r8a7790-sysc.h> + + pci@ee090000 { + compatible = "renesas,pci-r8a7790", "renesas,pci-rcar-gen2"; + device_type = "pci"; + reg = <0xee090000 0xc00>, + <0xee080000 0x1100>; + clocks = <&cpg CPG_MOD 703>; + power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; + resets = <&cpg 703>; + interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; + + bus-range = <0 0>; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + ranges = <0x02000000 0 0xee080000 0xee080000 0 0x00010000>; + dma-ranges = <0x42000000 0 0x40000000 0x40000000 0 0x40000000>; + interrupt-map-mask = <0xf800 0 0 0x7>; + interrupt-map = <0x0000 0 0 1 &gic GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>, + <0x0800 0 0 1 &gic GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>, + <0x1000 0 0 2 &gic GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; + + usb@1,0 { + reg = <0x800 0 0 0 0>; + phys = <&usb0 0>; + phy-names = "usb"; + }; + + usb@2,0 { + reg = <0x1000 0 0 0 0>; + phys = <&usb0 0>; + phy-names = "usb"; + }; + }; diff --git a/dts/Bindings/pci/rockchip,rk3399-pcie-common.yaml b/dts/Bindings/pci/rockchip,rk3399-pcie-common.yaml new file mode 100644 index 0000000000..a8574f8a84 --- /dev/null +++ b/dts/Bindings/pci/rockchip,rk3399-pcie-common.yaml @@ -0,0 +1,69 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pci/rockchip,rk3399-pcie-common.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Rockchip AXI PCIe Bridge Common Properties + +maintainers: + - Shawn Lin <shawn.lin@rock-chips.com> + +properties: + reg: + maxItems: 2 + + clocks: + maxItems: 4 + + clock-names: + items: + - const: aclk + - const: aclk-perf + - const: hclk + - const: pm + + num-lanes: + maximum: 4 + + phys: + oneOf: + - maxItems: 1 + - maxItems: 4 + + phy-names: + oneOf: + - const: pcie-phy + - items: + - const: pcie-phy-0 + - const: pcie-phy-1 + - const: pcie-phy-2 + - const: pcie-phy-3 + + resets: + maxItems: 7 + + reset-names: + items: + - const: core + - const: mgmt + - const: mgmt-sticky + - const: pipe + - const: pm + - const: pclk + - const: aclk + +required: + - compatible + - reg + - reg-names + - clocks + - clock-names + - phys + - phy-names + - resets + - reset-names + +additionalProperties: true + +... diff --git a/dts/Bindings/pci/rockchip,rk3399-pcie-ep.yaml b/dts/Bindings/pci/rockchip,rk3399-pcie-ep.yaml new file mode 100644 index 0000000000..6b62f6f58e --- /dev/null +++ b/dts/Bindings/pci/rockchip,rk3399-pcie-ep.yaml @@ -0,0 +1,70 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pci/rockchip,rk3399-pcie-ep.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Rockchip AXI PCIe Endpoint + +maintainers: + - Shawn Lin <shawn.lin@rock-chips.com> + +allOf: + - $ref: /schemas/pci/pci-ep.yaml# + - $ref: rockchip,rk3399-pcie-common.yaml# + +properties: + compatible: + const: rockchip,rk3399-pcie-ep + + reg: true + + reg-names: + items: + - const: apb-base + - const: mem-base + + rockchip,max-outbound-regions: + description: Maximum number of outbound regions + $ref: /schemas/types.yaml#/definitions/uint32 + maximum: 32 + default: 32 + +required: + - rockchip,max-outbound-regions + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/clock/rk3399-cru.h> + + bus { + #address-cells = <2>; + #size-cells = <2>; + + pcie-ep@f8000000 { + compatible = "rockchip,rk3399-pcie-ep"; + reg = <0x0 0xfd000000 0x0 0x1000000>, <0x0 0xfa000000 0x0 0x2000000>; + reg-names = "apb-base", "mem-base"; + clocks = <&cru ACLK_PCIE>, <&cru ACLK_PERF_PCIE>, + <&cru PCLK_PCIE>, <&cru SCLK_PCIE_PM>; + clock-names = "aclk", "aclk-perf", + "hclk", "pm"; + max-functions = /bits/ 8 <8>; + num-lanes = <4>; + resets = <&cru SRST_PCIE_CORE>, <&cru SRST_PCIE_MGMT>, + <&cru SRST_PCIE_MGMT_STICKY>, <&cru SRST_PCIE_PIPE> , + <&cru SRST_PCIE_PM>, <&cru SRST_P_PCIE>, <&cru SRST_A_PCIE>; + reset-names = "core", "mgmt", "mgmt-sticky", "pipe", + "pm", "pclk", "aclk"; + phys = <&pcie_phy 0>, <&pcie_phy 1>, <&pcie_phy 2>, <&pcie_phy 3>; + phy-names = "pcie-phy-0", "pcie-phy-1", "pcie-phy-2", "pcie-phy-3"; + rockchip,max-outbound-regions = <16>; + pinctrl-names = "default"; + pinctrl-0 = <&pcie_clkreqnb_cpm>; + }; + }; +... diff --git a/dts/Bindings/pci/rockchip,rk3399-pcie.yaml b/dts/Bindings/pci/rockchip,rk3399-pcie.yaml new file mode 100644 index 0000000000..531008f0b6 --- /dev/null +++ b/dts/Bindings/pci/rockchip,rk3399-pcie.yaml @@ -0,0 +1,132 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pci/rockchip,rk3399-pcie.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Rockchip AXI PCIe Root Port Bridge Host + +maintainers: + - Shawn Lin <shawn.lin@rock-chips.com> + +allOf: + - $ref: /schemas/pci/pci-bus.yaml# + - $ref: rockchip,rk3399-pcie-common.yaml# + +properties: + compatible: + const: rockchip,rk3399-pcie + + reg: true + + reg-names: + items: + - const: axi-base + - const: apb-base + + interrupts: + maxItems: 3 + + interrupt-names: + items: + - const: sys + - const: legacy + - const: client + + aspm-no-l0s: + description: This property is needed if using 24MHz OSC for RC's PHY. + + ep-gpios: + description: pre-reset GPIO + + vpcie12v-supply: + description: The 12v regulator to use for PCIe. + + vpcie3v3-supply: + description: The 3.3v regulator to use for PCIe. + + vpcie1v8-supply: + description: The 1.8v regulator to use for PCIe. + + vpcie0v9-supply: + description: The 0.9v regulator to use for PCIe. + + interrupt-controller: + type: object + additionalProperties: false + + properties: + '#address-cells': + const: 0 + + '#interrupt-cells': + const: 1 + + interrupt-controller: true + +required: + - ranges + - "#interrupt-cells" + - interrupts + - interrupt-controller + - interrupt-map + - interrupt-map-mask + - msi-map + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/clock/rk3399-cru.h> + + bus { + #address-cells = <2>; + #size-cells = <2>; + + pcie@f8000000 { + compatible = "rockchip,rk3399-pcie"; + device_type = "pci"; + #address-cells = <3>; + #size-cells = <2>; + clocks = <&cru ACLK_PCIE>, <&cru ACLK_PERF_PCIE>, + <&cru PCLK_PCIE>, <&cru SCLK_PCIE_PM>; + clock-names = "aclk", "aclk-perf", + "hclk", "pm"; + interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH 0>; + interrupt-names = "sys", "legacy", "client"; + ep-gpios = <&gpio3 13 GPIO_ACTIVE_HIGH>; + ranges = <0x83000000 0x0 0xfa000000 0x0 0xfa000000 0x0 0x600000 + 0x81000000 0x0 0xfa600000 0x0 0xfa600000 0x0 0x100000>; + num-lanes = <4>; + msi-map = <0x0 &its 0x0 0x1000>; + reg = <0x0 0xf8000000 0x0 0x2000000>, <0x0 0xfd000000 0x0 0x1000000>; + reg-names = "axi-base", "apb-base"; + resets = <&cru SRST_PCIE_CORE>, <&cru SRST_PCIE_MGMT>, + <&cru SRST_PCIE_MGMT_STICKY>, <&cru SRST_PCIE_PIPE> , + <&cru SRST_PCIE_PM>, <&cru SRST_P_PCIE>, <&cru SRST_A_PCIE>; + reset-names = "core", "mgmt", "mgmt-sticky", "pipe", + "pm", "pclk", "aclk"; + /* deprecated legacy PHY model */ + phys = <&pcie_phy>; + phy-names = "pcie-phy"; + pinctrl-names = "default"; + pinctrl-0 = <&pcie_clkreq>; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 7>; + interrupt-map = <0 0 0 1 &pcie0_intc 0>, + <0 0 0 2 &pcie0_intc 1>, + <0 0 0 3 &pcie0_intc 2>, + <0 0 0 4 &pcie0_intc 3>; + + pcie0_intc: interrupt-controller { + interrupt-controller; + #address-cells = <0>; + #interrupt-cells = <1>; + }; + }; + }; +... diff --git a/dts/Bindings/pci/rockchip-dw-pcie.yaml b/dts/Bindings/pci/rockchip-dw-pcie.yaml new file mode 100644 index 0000000000..5f719218c4 --- /dev/null +++ b/dts/Bindings/pci/rockchip-dw-pcie.yaml @@ -0,0 +1,217 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pci/rockchip-dw-pcie.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: DesignWare based PCIe controller on Rockchip SoCs + +maintainers: + - Shawn Lin <shawn.lin@rock-chips.com> + - Simon Xue <xxm@rock-chips.com> + - Heiko Stuebner <heiko@sntech.de> + +description: |+ + RK3568 SoC PCIe host controller is based on the Synopsys DesignWare + PCIe IP and thus inherits all the common properties defined in + snps,dw-pcie.yaml. + +allOf: + - $ref: /schemas/pci/snps,dw-pcie.yaml# + +properties: + compatible: + oneOf: + - const: rockchip,rk3568-pcie + - items: + - enum: + - rockchip,rk3588-pcie + - const: rockchip,rk3568-pcie + + reg: + items: + - description: Data Bus Interface (DBI) registers + - description: Rockchip designed configuration registers + - description: Config registers + + reg-names: + items: + - const: dbi + - const: apb + - const: config + + clocks: + minItems: 5 + items: + - description: AHB clock for PCIe master + - description: AHB clock for PCIe slave + - description: AHB clock for PCIe dbi + - description: APB clock for PCIe + - description: Auxiliary clock for PCIe + - description: PIPE clock + - description: Reference clock for PCIe + + clock-names: + minItems: 5 + items: + - const: aclk_mst + - const: aclk_slv + - const: aclk_dbi + - const: pclk + - const: aux + - const: pipe + - const: ref + + interrupts: + items: + - description: + Combined system interrupt, which is used to signal the following + interrupts - phy_link_up, dll_link_up, link_req_rst_not, hp_pme, + hp, hp_msi, link_auto_bw, link_auto_bw_msi, bw_mgt, bw_mgt_msi, + edma_wr, edma_rd, dpa_sub_upd, rbar_update, link_eq_req, ep_elbi_app + - description: + Combined PM interrupt, which is used to signal the following + interrupts - linkst_in_l1sub, linkst_in_l1, linkst_in_l2, + linkst_in_l0s, linkst_out_l1sub, linkst_out_l1, linkst_out_l2, + linkst_out_l0s, pm_dstate_update + - description: + Combined message interrupt, which is used to signal the following + interrupts - ven_msg, unlock_msg, ltr_msg, cfg_pme, cfg_pme_msi, + pm_pme, pm_to_ack, pm_turnoff, obff_idle, obff_obff, obff_cpu_active + - description: + Combined legacy interrupt, which is used to signal the following + interrupts - inta, intb, intc, intd + - description: + Combined error interrupt, which is used to signal the following + interrupts - aer_rc_err, aer_rc_err_msi, rx_cpl_timeout, + tx_cpl_timeout, cor_err_sent, nf_err_sent, f_err_sent, cor_err_rx, + nf_err_rx, f_err_rx, radm_qoverflow + + interrupt-names: + items: + - const: sys + - const: pmc + - const: msg + - const: legacy + - const: err + + legacy-interrupt-controller: + description: Interrupt controller node for handling legacy PCI interrupts. + type: object + additionalProperties: false + properties: + "#address-cells": + const: 0 + + "#interrupt-cells": + const: 1 + + interrupt-controller: true + + interrupts: + items: + - description: combined legacy interrupt + required: + - "#address-cells" + - "#interrupt-cells" + - interrupt-controller + - interrupts + + msi-map: true + + num-lanes: true + + phys: + maxItems: 1 + + phy-names: + const: pcie-phy + + power-domains: + maxItems: 1 + + ranges: + minItems: 2 + maxItems: 3 + + resets: + minItems: 1 + maxItems: 2 + + reset-names: + oneOf: + - const: pipe + - items: + - const: pwr + - const: pipe + + vpcie3v3-supply: true + +required: + - compatible + - reg + - reg-names + - clocks + - clock-names + - msi-map + - num-lanes + - phys + - phy-names + - power-domains + - resets + - reset-names + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + + bus { + #address-cells = <2>; + #size-cells = <2>; + + pcie3x2: pcie@fe280000 { + compatible = "rockchip,rk3568-pcie"; + reg = <0x3 0xc0800000 0x0 0x390000>, + <0x0 0xfe280000 0x0 0x10000>, + <0x3 0x80000000 0x0 0x100000>; + reg-names = "dbi", "apb", "config"; + bus-range = <0x20 0x2f>; + clocks = <&cru 143>, <&cru 144>, + <&cru 145>, <&cru 146>, + <&cru 147>; + clock-names = "aclk_mst", "aclk_slv", + "aclk_dbi", "pclk", + "aux"; + device_type = "pci"; + interrupts = <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "sys", "pmc", "msg", "legacy", "err"; + linux,pci-domain = <2>; + max-link-speed = <2>; + msi-map = <0x2000 &its 0x2000 0x1000>; + num-lanes = <2>; + phys = <&pcie30phy>; + phy-names = "pcie-phy"; + power-domains = <&power 15>; + ranges = <0x81000000 0x0 0x80800000 0x3 0x80800000 0x0 0x100000>, + <0x83000000 0x0 0x80900000 0x3 0x80900000 0x0 0x3f700000>; + resets = <&cru 193>; + reset-names = "pipe"; + #address-cells = <3>; + #size-cells = <2>; + + legacy-interrupt-controller { + interrupt-controller; + #address-cells = <0>; + #interrupt-cells = <1>; + interrupt-parent = <&gic>; + interrupts = <GIC_SPI 72 IRQ_TYPE_EDGE_RISING>; + }; + }; + }; +... diff --git a/dts/Bindings/pci/rockchip-pcie-ep.txt b/dts/Bindings/pci/rockchip-pcie-ep.txt deleted file mode 100644 index 778467307a..0000000000 --- a/dts/Bindings/pci/rockchip-pcie-ep.txt +++ /dev/null @@ -1,62 +0,0 @@ -* Rockchip AXI PCIe Endpoint Controller DT description - -Required properties: -- compatible: Should contain "rockchip,rk3399-pcie-ep" -- reg: Two register ranges as listed in the reg-names property -- reg-names: Must include the following names - - "apb-base" - - "mem-base" -- clocks: Must contain an entry for each entry in clock-names. - See ../clocks/clock-bindings.txt for details. -- clock-names: Must include the following entries: - - "aclk" - - "aclk-perf" - - "hclk" - - "pm" -- resets: Must contain seven entries for each entry in reset-names. - See ../reset/reset.txt for details. -- reset-names: Must include the following names - - "core" - - "mgmt" - - "mgmt-sticky" - - "pipe" - - "pm" - - "aclk" - - "pclk" -- pinctrl-names : The pin control state names -- pinctrl-0: The "default" pinctrl state -- phys: Must contain an phandle to a PHY for each entry in phy-names. -- phy-names: Must include 4 entries for all 4 lanes even if some of - them won't be used for your cases. Entries are of the form "pcie-phy-N": - where N ranges from 0 to 3. - (see example below and you MUST also refer to ../phy/rockchip-pcie-phy.txt - for changing the #phy-cells of phy node to support it) -- rockchip,max-outbound-regions: Maximum number of outbound regions - -Optional Property: -- num-lanes: number of lanes to use -- max-functions: Maximum number of functions that can be configured (default 1). - -pcie0-ep: pcie@f8000000 { - compatible = "rockchip,rk3399-pcie-ep"; - #address-cells = <3>; - #size-cells = <2>; - rockchip,max-outbound-regions = <16>; - clocks = <&cru ACLK_PCIE>, <&cru ACLK_PERF_PCIE>, - <&cru PCLK_PCIE>, <&cru SCLK_PCIE_PM>; - clock-names = "aclk", "aclk-perf", - "hclk", "pm"; - max-functions = /bits/ 8 <8>; - num-lanes = <4>; - reg = <0x0 0xfd000000 0x0 0x1000000>, <0x0 0x80000000 0x0 0x20000>; - reg-names = "apb-base", "mem-base"; - resets = <&cru SRST_PCIE_CORE>, <&cru SRST_PCIE_MGMT>, - <&cru SRST_PCIE_MGMT_STICKY>, <&cru SRST_PCIE_PIPE> , - <&cru SRST_PCIE_PM>, <&cru SRST_P_PCIE>, <&cru SRST_A_PCIE>; - reset-names = "core", "mgmt", "mgmt-sticky", "pipe", - "pm", "pclk", "aclk"; - phys = <&pcie_phy 0>, <&pcie_phy 1>, <&pcie_phy 2>, <&pcie_phy 3>; - phy-names = "pcie-phy-0", "pcie-phy-1", "pcie-phy-2", "pcie-phy-3"; - pinctrl-names = "default"; - pinctrl-0 = <&pcie_clkreq>; -}; diff --git a/dts/Bindings/pci/rockchip-pcie-host.txt b/dts/Bindings/pci/rockchip-pcie-host.txt deleted file mode 100644 index af34c65773..0000000000 --- a/dts/Bindings/pci/rockchip-pcie-host.txt +++ /dev/null @@ -1,135 +0,0 @@ -* Rockchip AXI PCIe Root Port Bridge DT description - -Required properties: -- #address-cells: Address representation for root ports, set to <3> -- #size-cells: Size representation for root ports, set to <2> -- #interrupt-cells: specifies the number of cells needed to encode an - interrupt source. The value must be 1. -- compatible: Should contain "rockchip,rk3399-pcie" -- reg: Two register ranges as listed in the reg-names property -- reg-names: Must include the following names - - "axi-base" - - "apb-base" -- clocks: Must contain an entry for each entry in clock-names. - See ../clocks/clock-bindings.txt for details. -- clock-names: Must include the following entries: - - "aclk" - - "aclk-perf" - - "hclk" - - "pm" -- msi-map: Maps a Requester ID to an MSI controller and associated - msi-specifier data. See ./pci-msi.txt -- interrupts: Three interrupt entries must be specified. -- interrupt-names: Must include the following names - - "sys" - - "legacy" - - "client" -- resets: Must contain seven entries for each entry in reset-names. - See ../reset/reset.txt for details. -- reset-names: Must include the following names - - "core" - - "mgmt" - - "mgmt-sticky" - - "pipe" - - "pm" - - "aclk" - - "pclk" -- pinctrl-names : The pin control state names -- pinctrl-0: The "default" pinctrl state -- #interrupt-cells: specifies the number of cells needed to encode an - interrupt source. The value must be 1. -- interrupt-map-mask and interrupt-map: standard PCI properties - -Required properties for legacy PHY model (deprecated): -- phys: From PHY bindings: Phandle for the Generic PHY for PCIe. -- phy-names: MUST be "pcie-phy". - -Required properties for per-lane PHY model (preferred): -- phys: Must contain an phandle to a PHY for each entry in phy-names. -- phy-names: Must include 4 entries for all 4 lanes even if some of - them won't be used for your cases. Entries are of the form "pcie-phy-N": - where N ranges from 0 to 3. - (see example below and you MUST also refer to ../phy/rockchip-pcie-phy.txt - for changing the #phy-cells of phy node to support it) - -Optional Property: -- aspm-no-l0s: RC won't support ASPM L0s. This property is needed if - using 24MHz OSC for RC's PHY. -- ep-gpios: contain the entry for pre-reset GPIO -- num-lanes: number of lanes to use -- vpcie12v-supply: The phandle to the 12v regulator to use for PCIe. -- vpcie3v3-supply: The phandle to the 3.3v regulator to use for PCIe. -- vpcie1v8-supply: The phandle to the 1.8v regulator to use for PCIe. -- vpcie0v9-supply: The phandle to the 0.9v regulator to use for PCIe. - -*Interrupt controller child node* -The core controller provides a single interrupt for legacy INTx. The PCIe node -should contain an interrupt controller node as a target for the PCI -'interrupt-map' property. This node represents the domain at which the four -INTx interrupts are decoded and routed. - - -Required properties for Interrupt controller child node: -- interrupt-controller: identifies the node as an interrupt controller -- #address-cells: specifies the number of cells needed to encode an - address. The value must be 0. -- #interrupt-cells: specifies the number of cells needed to encode an - interrupt source. The value must be 1. - -Example: - -pcie0: pcie@f8000000 { - compatible = "rockchip,rk3399-pcie"; - #address-cells = <3>; - #size-cells = <2>; - clocks = <&cru ACLK_PCIE>, <&cru ACLK_PERF_PCIE>, - <&cru PCLK_PCIE>, <&cru SCLK_PCIE_PM>; - clock-names = "aclk", "aclk-perf", - "hclk", "pm"; - bus-range = <0x0 0x1>; - interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH 0>, - <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH 0>, - <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH 0>; - interrupt-names = "sys", "legacy", "client"; - assigned-clocks = <&cru SCLK_PCIEPHY_REF>; - assigned-clock-parents = <&cru SCLK_PCIEPHY_REF100M>; - assigned-clock-rates = <100000000>; - ep-gpios = <&gpio3 13 GPIO_ACTIVE_HIGH>; - ranges = <0x83000000 0x0 0xfa000000 0x0 0xfa000000 0x0 0x600000 - 0x81000000 0x0 0xfa600000 0x0 0xfa600000 0x0 0x100000>; - num-lanes = <4>; - msi-map = <0x0 &its 0x0 0x1000>; - reg = <0x0 0xf8000000 0x0 0x2000000>, <0x0 0xfd000000 0x0 0x1000000>; - reg-names = "axi-base", "apb-base"; - resets = <&cru SRST_PCIE_CORE>, <&cru SRST_PCIE_MGMT>, - <&cru SRST_PCIE_MGMT_STICKY>, <&cru SRST_PCIE_PIPE> , - <&cru SRST_PCIE_PM>, <&cru SRST_P_PCIE>, <&cru SRST_A_PCIE>; - reset-names = "core", "mgmt", "mgmt-sticky", "pipe", - "pm", "pclk", "aclk"; - /* deprecated legacy PHY model */ - phys = <&pcie_phy>; - phy-names = "pcie-phy"; - pinctrl-names = "default"; - pinctrl-0 = <&pcie_clkreq>; - #interrupt-cells = <1>; - interrupt-map-mask = <0 0 0 7>; - interrupt-map = <0 0 0 1 &pcie0_intc 0>, - <0 0 0 2 &pcie0_intc 1>, - <0 0 0 3 &pcie0_intc 2>, - <0 0 0 4 &pcie0_intc 3>; - pcie0_intc: interrupt-controller { - interrupt-controller; - #address-cells = <0>; - #interrupt-cells = <1>; - }; -}; - -pcie0: pcie@f8000000 { - ... - - /* preferred per-lane PHY model */ - phys = <&pcie_phy 0>, <&pcie_phy 1>, <&pcie_phy 2>, <&pcie_phy 3>; - phy-names = "pcie-phy-0", "pcie-phy-1", "pcie-phy-2", "pcie-phy-3"; - - ... -}; diff --git a/dts/Bindings/pci/samsung,exynos-pcie.yaml b/dts/Bindings/pci/samsung,exynos-pcie.yaml new file mode 100644 index 0000000000..f20ed7e709 --- /dev/null +++ b/dts/Bindings/pci/samsung,exynos-pcie.yaml @@ -0,0 +1,119 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pci/samsung,exynos-pcie.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Samsung SoC series PCIe Host Controller + +maintainers: + - Marek Szyprowski <m.szyprowski@samsung.com> + - Jaehoon Chung <jh80.chung@samsung.com> + +description: |+ + Exynos5433 SoC PCIe host controller is based on the Synopsys DesignWare + PCIe IP and thus inherits all the common properties defined in + snps,dw-pcie.yaml. + +allOf: + - $ref: /schemas/pci/snps,dw-pcie.yaml# + +properties: + compatible: + const: samsung,exynos5433-pcie + + reg: + items: + - description: Data Bus Interface (DBI) registers. + - description: External Local Bus interface (ELBI) registers. + - description: PCIe configuration space region. + + reg-names: + items: + - const: dbi + - const: elbi + - const: config + + interrupts: + maxItems: 1 + + clocks: + items: + - description: PCIe bridge clock + - description: PCIe bus clock + + clock-names: + items: + - const: pcie + - const: pcie_bus + + phys: + maxItems: 1 + + vdd10-supply: + description: + Phandle to a regulator that provides 1.0V power to the PCIe block. + + vdd18-supply: + description: + Phandle to a regulator that provides 1.8V power to the PCIe block. + + num-lanes: + const: 1 + + num-viewport: + const: 3 + +required: + - reg + - reg-names + - interrupts + - "#address-cells" + - "#size-cells" + - "#interrupt-cells" + - interrupt-map + - interrupt-map-mask + - ranges + - bus-range + - device_type + - num-lanes + - num-viewport + - clocks + - clock-names + - phys + - vdd10-supply + - vdd18-supply + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/clock/exynos5433.h> + + pcie: pcie@15700000 { + compatible = "samsung,exynos5433-pcie"; + reg = <0x15700000 0x1000>, <0x156b0000 0x1000>, <0x0c000000 0x1000>; + reg-names = "dbi", "elbi", "config"; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + device_type = "pci"; + interrupts = <GIC_SPI 245 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cmu_fsys CLK_PCIE>, <&cmu_fsys CLK_PCLK_PCIE_PHY>; + clock-names = "pcie", "pcie_bus"; + phys = <&pcie_phy>; + pinctrl-0 = <&pcie_bus &pcie_wlanen>; + pinctrl-names = "default"; + num-lanes = <1>; + num-viewport = <3>; + bus-range = <0x00 0xff>; + ranges = <0x81000000 0 0 0x0c001000 0 0x00010000>, + <0x82000000 0 0x0c011000 0x0c011000 0 0x03feefff>; + vdd10-supply = <&ldo6_reg>; + vdd18-supply = <&ldo7_reg>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &gic GIC_SPI 245 IRQ_TYPE_LEVEL_HIGH>; + }; +... diff --git a/dts/Bindings/pci/samsung,exynos5440-pcie.txt b/dts/Bindings/pci/samsung,exynos5440-pcie.txt deleted file mode 100644 index 651d957d10..0000000000 --- a/dts/Bindings/pci/samsung,exynos5440-pcie.txt +++ /dev/null @@ -1,58 +0,0 @@ -* Samsung Exynos 5440 PCIe interface - -This PCIe host controller is based on the Synopsys DesignWare PCIe IP -and thus inherits all the common properties defined in designware-pcie.txt. - -Required properties: -- compatible: "samsung,exynos5440-pcie" -- reg: base addresses and lengths of the PCIe controller, -- reg-names : First name should be set to "elbi". - And use the "config" instead of getting the configuration address space - from "ranges". - NOTE: When using the "config" property, reg-names must be set. -- interrupts: A list of interrupt outputs for level interrupt, - pulse interrupt, special interrupt. -- phys: From PHY binding. Phandle for the generic PHY. - Refer to Documentation/devicetree/bindings/phy/samsung-phy.txt - -For other common properties, refer to - Documentation/devicetree/bindings/pci/designware-pcie.txt - -Example: - -SoC-specific DT Entry (with using PHY framework): - - pcie_phy0: pcie-phy@270000 { - ... - reg = <0x270000 0x1000>, <0x271000 0x40>; - reg-names = "phy", "block"; - ... - }; - - pcie@290000 { - compatible = "samsung,exynos5440-pcie", "snps,dw-pcie"; - reg = <0x290000 0x1000>, <0x40000000 0x1000>; - reg-names = "elbi", "config"; - clocks = <&clock 28>, <&clock 27>; - clock-names = "pcie", "pcie_bus"; - #address-cells = <3>; - #size-cells = <2>; - device_type = "pci"; - phys = <&pcie_phy0>; - ranges = <0x81000000 0 0 0x60001000 0 0x00010000 - 0x82000000 0 0x60011000 0x60011000 0 0x1ffef000>; - #interrupt-cells = <1>; - interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &gic GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>; - num-lanes = <4>; - }; - -Board-specific DT Entry: - - pcie@290000 { - reset-gpio = <&pin_ctrl 5 0>; - }; - - pcie@2a0000 { - reset-gpio = <&pin_ctrl 22 0>; - }; diff --git a/dts/Bindings/pci/sifive,fu740-pcie.yaml b/dts/Bindings/pci/sifive,fu740-pcie.yaml new file mode 100644 index 0000000000..844fc71423 --- /dev/null +++ b/dts/Bindings/pci/sifive,fu740-pcie.yaml @@ -0,0 +1,120 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pci/sifive,fu740-pcie.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: SiFive FU740 PCIe host controller + +description: |+ + SiFive FU740 PCIe host controller is based on the Synopsys DesignWare + PCI core. It shares common features with the PCIe DesignWare core and + inherits common properties defined in + Documentation/devicetree/bindings/pci/snps,dw-pcie.yaml. + +maintainers: + - Paul Walmsley <paul.walmsley@sifive.com> + - Greentime Hu <greentime.hu@sifive.com> + +allOf: + - $ref: /schemas/pci/snps,dw-pcie.yaml# + +properties: + compatible: + const: sifive,fu740-pcie + + reg: + maxItems: 3 + + reg-names: + items: + - const: dbi + - const: config + - const: mgmt + + dma-coherent: true + + num-lanes: + const: 8 + + msi-parent: true + + interrupt-names: + items: + - const: msi + - const: inta + - const: intb + - const: intc + - const: intd + + resets: + description: A phandle to the PCIe power up reset line. + maxItems: 1 + + clocks: + maxItems: 1 + + clock-names: + const: pcie_aux + + pwren-gpios: + description: Should specify the GPIO for controlling the PCI bus device power on. + maxItems: 1 + + reset-gpios: + maxItems: 1 + +required: + - dma-coherent + - num-lanes + - interrupts + - interrupt-names + - interrupt-map-mask + - interrupt-map + - clocks + - clock-names + - resets + - pwren-gpios + - reset-gpios + +unevaluatedProperties: false + +examples: + - | + bus { + #address-cells = <2>; + #size-cells = <2>; + #include <dt-bindings/clock/sifive-fu740-prci.h> + + pcie@e00000000 { + compatible = "sifive,fu740-pcie"; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + reg = <0xe 0x00000000 0x0 0x80000000>, + <0xd 0xf0000000 0x0 0x10000000>, + <0x0 0x100d0000 0x0 0x1000>; + reg-names = "dbi", "config", "mgmt"; + device_type = "pci"; + dma-coherent; + bus-range = <0x0 0xff>; + ranges = <0x81000000 0x0 0x60080000 0x0 0x60080000 0x0 0x10000>, /* I/O */ + <0x82000000 0x0 0x60090000 0x0 0x60090000 0x0 0xff70000>, /* mem */ + <0x82000000 0x0 0x70000000 0x0 0x70000000 0x0 0x1000000>, /* mem */ + <0xc3000000 0x20 0x00000000 0x20 0x00000000 0x20 0x00000000>; /* mem prefetchable */ + num-lanes = <0x8>; + interrupts = <56>, <57>, <58>, <59>, <60>, <61>, <62>, <63>, <64>; + interrupt-names = "msi", "inta", "intb", "intc", "intd"; + interrupt-parent = <&plic0>; + interrupt-map-mask = <0x0 0x0 0x0 0x7>; + interrupt-map = <0x0 0x0 0x0 0x1 &plic0 57>, + <0x0 0x0 0x0 0x2 &plic0 58>, + <0x0 0x0 0x0 0x3 &plic0 59>, + <0x0 0x0 0x0 0x4 &plic0 60>; + clock-names = "pcie_aux"; + clocks = <&prci FU740_PRCI_CLK_PCIE_AUX>; + resets = <&prci 4>; + pwren-gpios = <&gpio 5 0>; + reset-gpios = <&gpio 8 0>; + }; + }; diff --git a/dts/Bindings/pci/snps,dw-pcie-common.yaml b/dts/Bindings/pci/snps,dw-pcie-common.yaml new file mode 100644 index 0000000000..dc05761c5c --- /dev/null +++ b/dts/Bindings/pci/snps,dw-pcie-common.yaml @@ -0,0 +1,266 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pci/snps,dw-pcie-common.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Synopsys DWC PCIe RP/EP controller + +maintainers: + - Jingoo Han <jingoohan1@gmail.com> + - Gustavo Pimentel <gustavo.pimentel@synopsys.com> + +description: + Generic Synopsys DesignWare PCIe Root Port and Endpoint controller + properties. + +select: false + +properties: + reg: + description: + DWC PCIe CSR space is normally accessed over the dedicated Data Bus + Interface - DBI. In accordance with the reference manual the register + configuration space belongs to the Configuration-Dependent Module (CDM) + and is split up into several sub-parts Standard PCIe configuration + space, Port Logic Registers (PL), Shadow Config-space Registers, + iATU/eDMA registers. The particular sub-space is selected by the + CDM/ELBI (dbi_cs) and CS2 (dbi_cs2) signals (selector bits). Such + configuration provides a flexible interface for the system engineers to + either map the particular space at a desired MMIO address or just leave + them in a contiguous memory space if pure Native or AXI Bridge DBI access + is selected. Note the PCIe CFG-space, PL and Shadow registers are + specific for each activated function, while the rest of the sub-spaces + are common for all of them (if there are more than one). + minItems: 2 + maxItems: 7 + + reg-names: + minItems: 2 + maxItems: 7 + + interrupts: + description: + There are two main sub-blocks which are normally capable of + generating interrupts. It's System Information Interface and MSI + interface. While the former one has some common for the Host and + Endpoint controllers IRQ-signals, the later interface is obviously + Root Complex specific since it's responsible for the incoming MSI + messages signalling. The System Information IRQ signals are mainly + responsible for reporting the generic PCIe hierarchy and Root + Complex events like VPD IO request, general AER, PME, Hot-plug, link + bandwidth change, link equalization request, INTx asserted/deasserted + Message detection, embedded DMA Tx/Rx/Error. + minItems: 1 + maxItems: 26 + + interrupt-names: + minItems: 1 + maxItems: 26 + + clocks: + description: + DWC PCIe reference manual explicitly defines a set of the clocks required + to get the controller working correctly. In general all of them can + be divided into two groups':' application and core clocks. Note the + platforms may have some of the clock sources unspecified in case if the + corresponding domains are fed up from a common clock source. + minItems: 1 + maxItems: 7 + + clock-names: + minItems: 1 + maxItems: 7 + items: + oneOf: + - description: + Data Bus Interface (DBI) clock. Clock signal for the AXI-bus + interface of the Configuration-Dependent Module, which is + basically the set of the controller CSRs. + const: dbi + - description: + Application AXI-bus Master interface clock. Basically this is + a clock for the controller DMA interface (PCI-to-CPU). + const: mstr + - description: + Application AXI-bus Slave interface clock. This is a clock for + the CPU-to-PCI memory IO interface. + const: slv + - description: + Controller Core-PCS PIPE interface clock. It's normally + supplied by an external PCS-PHY. + const: pipe + - description: + Controller Primary clock. It's assumed that all controller input + signals (except resets) are synchronous to this clock. + const: core + - description: + Auxiliary clock for the controller PMC domain. The controller + partitioning implies having some parts to operate with this + clock in some power management states. + const: aux + - description: + Generic reference clock. In case if there are several + interfaces fed up with a common clock source it's advisable to + define it with this name (for instance pipe, core and aux can + be connected to a single source of the periodic signal). + const: ref + - description: + Clock for the PHY registers interface. Originally this is + a PHY-viewport-based interface, but some platform may have + specifically designed one. + const: phy_reg + - description: + Vendor-specific clock names. Consider using the generic names + above for new bindings. + oneOf: + - description: See native 'dbi' clock for details + enum: [ pcie, pcie_apb_sys, aclk_dbi ] + - description: See native 'mstr/slv' clock for details + enum: [ pcie_bus, pcie_inbound_axi, pcie_aclk, aclk_mst, aclk_slv ] + - description: See native 'pipe' clock for details + enum: [ pcie_phy, pcie_phy_ref, link ] + - description: See native 'aux' clock for details + enum: [ pcie_aux ] + - description: See native 'ref' clock for details. + enum: [ gio ] + - description: See nativs 'phy_reg' clock for details + enum: [ pcie_apb_phy, pclk ] + + resets: + description: + DWC PCIe reference manual explicitly defines a set of the reset + signals required to be de-asserted to properly activate the controller + sub-parts. All of these signals can be divided into two sub-groups':' + application and core resets with respect to the main sub-domains they + are supposed to reset. Note the platforms may have some of these signals + unspecified in case if they are automatically handled or aggregated into + a comprehensive control module. + minItems: 1 + maxItems: 10 + + reset-names: + minItems: 1 + maxItems: 10 + items: + oneOf: + - description: Data Bus Interface (DBI) domain reset + const: dbi + - description: AXI-bus Master interface reset + const: mstr + - description: AXI-bus Slave interface reset + const: slv + - description: Application-dependent interface reset + const: app + - description: Controller Non-sticky CSR flags reset + const: non-sticky + - description: Controller sticky CSR flags reset + const: sticky + - description: PIPE-interface (Core-PCS) logic reset + const: pipe + - description: + Controller primary reset (resets everything except PMC module) + const: core + - description: PCS/PHY block reset + const: phy + - description: PMC hot reset signal + const: hot + - description: Cold reset signal + const: pwr + - description: + Vendor-specific reset names. Consider using the generic names + above for new bindings. + oneOf: + - description: See native 'app' reset for details + enum: [ apps, gio, apb ] + - description: See native 'phy' reset for details + enum: [ pciephy, link ] + - description: See native 'pwr' reset for details + enum: [ turnoff ] + + phys: + description: + There can be up to the number of possible lanes PHYs specified placed in + the phandle array in the line-based order. Obviously each the specified + PHYs are supposed to be able to work in the PCIe mode with a speed + implied by the DWC PCIe controller they are attached to. + minItems: 1 + maxItems: 16 + + phy-names: + minItems: 1 + maxItems: 16 + oneOf: + - description: Generic PHY names + items: + pattern: '^pcie[0-9]+$' + - description: + Vendor-specific PHY names. Consider using the generic + names above for new bindings. + items: + oneOf: + - pattern: '^pcie(-?phy[0-9]*)?$' + - pattern: '^p2u-[0-7]$' + + reset-gpio: + deprecated: true + description: + Reference to the GPIO-controlled PERST# signal. It is used to reset all + the peripheral devices available on the PCIe bus. + maxItems: 1 + + reset-gpios: + description: + Reference to the GPIO-controlled PERST# signal. It is used to reset all + the peripheral devices available on the PCIe bus. + maxItems: 1 + + max-link-speed: + maximum: 5 + + num-lanes: + description: + Number of PCIe link lanes to use. Can be omitted if the already brought + up link is supposed to be preserved. + maximum: 16 + + num-ob-windows: + $ref: /schemas/types.yaml#/definitions/uint32 + deprecated: true + description: + Number of outbound address translation windows. This parameter can be + auto-detected based on the iATU memory writability. So there is no + point in having a dedicated DT-property for it. + maximum: 256 + + num-ib-windows: + $ref: /schemas/types.yaml#/definitions/uint32 + deprecated: true + description: + Number of inbound address translation windows. In the same way as + for the outbound AT windows, this parameter can be auto-detected based + on the iATU memory writability. There is no point having a dedicated + DT-property for it either. + maximum: 256 + + num-viewport: + $ref: /schemas/types.yaml#/definitions/uint32 + deprecated: true + description: + Number of outbound view ports configured in hardware. It's the same as + the number of outbound AT windows. + maximum: 256 + + snps,enable-cdm-check: + $ref: /schemas/types.yaml#/definitions/flag + description: + Enable automatic checking of CDM (Configuration Dependent Module) + registers for data corruption. CDM registers include standard PCIe + configuration space registers, Port Logic registers, DMA and iATU + registers. This feature has been available since DWC PCIe v4.80a. + + dma-coherent: true + +additionalProperties: true + +... diff --git a/dts/Bindings/pci/snps,dw-pcie-ep.yaml b/dts/Bindings/pci/snps,dw-pcie-ep.yaml new file mode 100644 index 0000000000..bbdb01d228 --- /dev/null +++ b/dts/Bindings/pci/snps,dw-pcie-ep.yaml @@ -0,0 +1,194 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pci/snps,dw-pcie-ep.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Synopsys DesignWare PCIe endpoint interface + +maintainers: + - Jingoo Han <jingoohan1@gmail.com> + - Gustavo Pimentel <gustavo.pimentel@synopsys.com> + +description: | + Synopsys DesignWare PCIe host controller endpoint + +# Please create a separate DT-schema for your DWC PCIe Endpoint controller +# and make sure it's assigned with the vendor-specific compatible string. +select: + properties: + compatible: + const: snps,dw-pcie-ep + required: + - compatible + +allOf: + - $ref: /schemas/pci/pci-ep.yaml# + - $ref: /schemas/pci/snps,dw-pcie-common.yaml# + +properties: + reg: + description: + DBI, DBI2 reg-spaces and outbound memory window are required for the + normal controller functioning. iATU memory IO region is also required + if the space is unrolled (IP-core version >= 4.80a). + minItems: 2 + maxItems: 7 + + reg-names: + minItems: 2 + maxItems: 7 + items: + oneOf: + - description: + Basic DWC PCIe controller configuration-space accessible over + the DBI interface. This memory space is either activated with + CDM/ELBI = 0 and CS2 = 0 or is a contiguous memory region + with all spaces. Note iATU/eDMA CSRs are indirectly accessible + via the PL viewports on the DWC PCIe controllers older than + v4.80a. + const: dbi + - description: + Shadow DWC PCIe config-space registers. This space is selected + by setting CDM/ELBI = 0 and CS2 = 1. This is an intermix of + the PCI-SIG PCIe CFG-space with the shadow registers for some + PCI Header space, PCI Standard and Extended Structures. It's + mainly relevant for the end-point controller configuration, + but still there are some shadow registers available for the + Root Port mode too. + const: dbi2 + - description: + External Local Bus registers. It's an application-dependent + registers normally defined by the platform engineers. The space + can be selected by setting CDM/ELBI = 1 and CS2 = 0 wires or can + be accessed over some platform-specific means (for instance + as a part of a system controller). + enum: [ elbi, app ] + - description: + iATU/eDMA registers common for all device functions. It's an + unrolled memory space with the internal Address Translation + Unit and Enhanced DMA, which is selected by setting CDM/ELBI = 1 + and CS2 = 1. For IP-core releases prior v4.80a, these registers + have been programmed via an indirect addressing scheme using a + set of viewport CSRs mapped into the PL space. Note iATU is + normally mapped to the 0x0 address of this region, while eDMA + is available at 0x80000 base address. + const: atu + - description: + Platform-specific eDMA registers. Some platforms may have eDMA + CSRs mapped in a non-standard base address. The registers offset + can be changed or the MS/LS-bits of the address can be attached + in an additional RTL block before the MEM-IO transactions reach + the DW PCIe slave interface. + const: dma + - description: + PHY/PCS configuration registers. Some platforms can have the + PCS and PHY CSRs accessible over a dedicated memory mapped + region, but mainly these registers are indirectly accessible + either by means of the embedded PHY viewport schema or by some + platform-specific method. + const: phy + - description: + Outbound iATU-capable memory-region which will be used to + generate various application-specific traffic on the PCIe bus + hierarchy. It's usage scenario depends on the endpoint + functionality, for instance it can be used to create MSI(X) + messages. + const: addr_space + - description: + Vendor-specific CSR names. Consider using the generic names above + for new bindings. + oneOf: + - description: See native 'elbi/app' CSR region for details. + enum: [ link, appl ] + - description: See native 'atu' CSR region for details. + enum: [ atu_dma ] + allOf: + - contains: + const: dbi + - contains: + const: addr_space + + interrupts: + description: + There is no mandatory IRQ signals for the normal controller functioning, + but in addition to the native set the platforms may have a link- or + PM-related IRQs specified. + minItems: 1 + maxItems: 20 + + interrupt-names: + minItems: 1 + maxItems: 20 + items: + oneOf: + - description: + Controller request to read or write virtual product data + from/to the VPD capability registers. + const: vpd + - description: + Link Equalization Request flag is set in the Link Status 2 + register (applicable if the corresponding IRQ is enabled in + the Link Control 3 register). + const: l_eq + - description: + Indicates that the eDMA Tx/Rx transfer is complete or that an + error has occurred on the corresponding channel. eDMA can have + eight Tx (Write) and Rx (Read) eDMA channels thus supporting up + to 16 IRQ signals all together. Write eDMA channels shall go + first in the ordered row as per default edma_int[*] bus setup. + pattern: '^dma([0-9]|1[0-5])?$' + - description: + PCIe protocol correctable error or a Data Path protection + correctable error is detected by the automotive/safety + feature. + const: sft_ce + - description: + Indicates that the internal safety mechanism has detected an + uncorrectable error. + const: sft_ue + - description: + Application-specific IRQ raised depending on the vendor-specific + events basis. + const: app + - description: + Vendor-specific IRQ names. Consider using the generic names above + for new bindings. + oneOf: + - description: See native "app" IRQ for details + enum: [ intr ] + + max-functions: + maximum: 32 + +required: + - compatible + - reg + - reg-names + +additionalProperties: true + +examples: + - | + pcie-ep@dfd00000 { + compatible = "snps,dw-pcie-ep"; + reg = <0xdfc00000 0x0001000>, /* IP registers 1 */ + <0xdfc01000 0x0001000>, /* IP registers 2 */ + <0xd0000000 0x2000000>; /* Configuration space */ + reg-names = "dbi", "dbi2", "addr_space"; + + interrupts = <23>, <24>; + interrupt-names = "dma0", "dma1"; + + clocks = <&sys_clk 12>, <&sys_clk 24>; + clock-names = "dbi", "ref"; + + resets = <&sys_rst 12>, <&sys_rst 24>; + reset-names = "dbi", "phy"; + + phys = <&pcie_phy0>, <&pcie_phy1>, <&pcie_phy2>, <&pcie_phy3>; + phy-names = "pcie0", "pcie1", "pcie2", "pcie3"; + + max-link-speed = <3>; + max-functions = /bits/ 8 <4>; + }; diff --git a/dts/Bindings/pci/snps,dw-pcie.yaml b/dts/Bindings/pci/snps,dw-pcie.yaml new file mode 100644 index 0000000000..022055edbf --- /dev/null +++ b/dts/Bindings/pci/snps,dw-pcie.yaml @@ -0,0 +1,242 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pci/snps,dw-pcie.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Synopsys DesignWare PCIe interface + +maintainers: + - Jingoo Han <jingoohan1@gmail.com> + - Gustavo Pimentel <gustavo.pimentel@synopsys.com> + +description: | + Synopsys DesignWare PCIe host controller + +# Please create a separate DT-schema for your DWC PCIe Root Port controller +# and make sure it's assigned with the vendor-specific compatible string. +select: + properties: + compatible: + const: snps,dw-pcie + required: + - compatible + +allOf: + - $ref: /schemas/pci/pci-bus.yaml# + - $ref: /schemas/pci/snps,dw-pcie-common.yaml# + - if: + not: + required: + - msi-map + then: + properties: + interrupt-names: + contains: + const: msi + +properties: + reg: + description: + At least DBI reg-space and peripheral devices CFG-space outbound window + are required for the normal controller work. iATU memory IO region is + also required if the space is unrolled (IP-core version >= 4.80a). + minItems: 2 + maxItems: 7 + + reg-names: + minItems: 2 + maxItems: 7 + items: + oneOf: + - description: + Basic DWC PCIe controller configuration-space accessible over + the DBI interface. This memory space is either activated with + CDM/ELBI = 0 and CS2 = 0 or is a contiguous memory region + with all spaces. Note iATU/eDMA CSRs are indirectly accessible + via the PL viewports on the DWC PCIe controllers older than + v4.80a. + const: dbi + - description: + Shadow DWC PCIe config-space registers. This space is selected + by setting CDM/ELBI = 0 and CS2 = 1. This is an intermix of + the PCI-SIG PCIe CFG-space with the shadow registers for some + PCI Header space, PCI Standard and Extended Structures. It's + mainly relevant for the end-point controller configuration, + but still there are some shadow registers available for the + Root Port mode too. + const: dbi2 + - description: + External Local Bus registers. It's an application-dependent + registers normally defined by the platform engineers. The space + can be selected by setting CDM/ELBI = 1 and CS2 = 0 wires or can + be accessed over some platform-specific means (for instance + as a part of a system controller). + enum: [ elbi, app ] + - description: + iATU/eDMA registers common for all device functions. It's an + unrolled memory space with the internal Address Translation + Unit and Enhanced DMA, which is selected by setting CDM/ELBI = 1 + and CS2 = 1. For IP-core releases prior v4.80a, these registers + have been programmed via an indirect addressing scheme using a + set of viewport CSRs mapped into the PL space. Note iATU is + normally mapped to the 0x0 address of this region, while eDMA + is available at 0x80000 base address. + const: atu + - description: + Platform-specific eDMA registers. Some platforms may have eDMA + CSRs mapped in a non-standard base address. The registers offset + can be changed or the MS/LS-bits of the address can be attached + in an additional RTL block before the MEM-IO transactions reach + the DW PCIe slave interface. + const: dma + - description: + PHY/PCS configuration registers. Some platforms can have the + PCS and PHY CSRs accessible over a dedicated memory mapped + region, but mainly these registers are indirectly accessible + either by means of the embedded PHY viewport schema or by some + platform-specific method. + const: phy + - description: + Outbound iATU-capable memory-region which will be used to access + the peripheral PCIe devices configuration space. + const: config + - description: + Vendor-specific CSR names. Consider using the generic names above + for new bindings. + oneOf: + - description: See native 'elbi/app' CSR region for details. + enum: [ apb, mgmt, link, ulreg, appl ] + - description: See native 'atu' CSR region for details. + enum: [ atu_dma ] + - description: Syscon-related CSR regions. + enum: [ smu, mpu ] + - description: Tegra234 aperture + enum: [ ecam ] + allOf: + - contains: + const: dbi + - contains: + const: config + + interrupts: + description: + DWC PCIe Root Port/Complex specific IRQ signals. At least MSI interrupt + signal is supposed to be specified for the host controller. + minItems: 1 + maxItems: 26 + + interrupt-names: + minItems: 1 + maxItems: 26 + items: + oneOf: + - description: + Controller request to read or write virtual product data + from/to the VPD capability registers. + const: vpd + - description: + Link Equalization Request flag is set in the Link Status 2 + register (applicable if the corresponding IRQ is enabled in + the Link Control 3 register). + const: l_eq + - description: + Indicates that the eDMA Tx/Rx transfer is complete or that an + error has occurred on the corresponding channel. eDMA can have + eight Tx (Write) and Rx (Read) eDMA channels thus supporting up + to 16 IRQ signals all together. Write eDMA channels shall go + first in the ordered row as per default edma_int[*] bus setup. + pattern: '^dma([0-9]|1[0-5])?$' + - description: + PCIe protocol correctable error or a Data Path protection + correctable error is detected by the automotive/safety + feature. + const: sft_ce + - description: + Indicates that the internal safety mechanism has detected an + uncorrectable error. + const: sft_ue + - description: + Application-specific IRQ raised depending on the vendor-specific + events basis. + const: app + - description: + DSP AXI MSI Interrupt detected. It gets de-asserted when there is + no more MSI interrupt pending. The interrupt is relevant to the + iMSI-RX - Integrated MSI Receiver (AXI bridge). + const: msi + - description: + Legacy A/B/C/D interrupt signal. Basically it's triggered by + receiving a Assert_INT{A,B,C,D}/Desassert_INT{A,B,C,D} message + from the downstream device. + pattern: "^int(a|b|c|d)$" + - description: + Error condition detected and a flag is set in the Root Error Status + register of the AER capability. It's asserted when the RC + internally generated an error or an error message is received by + the RC. + const: aer + - description: + PME message is received by the port. That means having the PME + status bit set in the Root Status register (the event is + supposed to be unmasked in the Root Control register). + const: pme + - description: + Hot-plug event is detected. That is a bit has been set in the + Slot Status register and the corresponding event is enabled in + the Slot Control register. + const: hp + - description: + Link Autonomous Bandwidth Status flag has been set in the Link + Status register (the event is supposed to be unmasked in the + Link Control register). + const: bw_au + - description: + Bandwidth Management Status flag has been set in the Link + Status register (the event is supposed to be unmasked in the + Link Control register). + const: bw_mg + - description: + Combined Legacy A/B/C/D interrupt signal. See "^int(a|b|c|d)$" for + details. + const: legacy + - description: + Vendor-specific IRQ names. Consider using the generic names above + for new bindings. + oneOf: + - description: See native "app" IRQ for details + enum: [ intr, sys, pmc, msg, err ] + +additionalProperties: true + +required: + - compatible + - reg + - reg-names + +examples: + - | + pcie@dfc00000 { + compatible = "snps,dw-pcie"; + device_type = "pci"; + reg = <0xdfc00000 0x0001000>, /* IP registers */ + <0xd0000000 0x0002000>; /* Configuration space */ + reg-names = "dbi", "config"; + #address-cells = <3>; + #size-cells = <2>; + ranges = <0x81000000 0 0x00000000 0xde000000 0 0x00010000>, + <0x82000000 0 0xd0400000 0xd0400000 0 0x0d000000>; + bus-range = <0x0 0xff>; + + interrupts = <25>, <24>; + interrupt-names = "msi", "hp"; + #interrupt-cells = <1>; + + reset-gpios = <&port0 0 1>; + + phys = <&pcie_phy>; + phy-names = "pcie"; + + num-lanes = <1>; + max-link-speed = <3>; + }; diff --git a/dts/Bindings/pci/socionext,uniphier-pcie-ep.yaml b/dts/Bindings/pci/socionext,uniphier-pcie-ep.yaml index f0558b9cf9..f0d8e486a0 100644 --- a/dts/Bindings/pci/socionext,uniphier-pcie-ep.yaml +++ b/dts/Bindings/pci/socionext,uniphier-pcie-ep.yaml @@ -10,43 +10,41 @@ description: | UniPhier PCIe endpoint controller is based on the Synopsys DesignWare PCI core. It shares common features with the PCIe DesignWare core and inherits common properties defined in - Documentation/devicetree/bindings/pci/designware-pcie.txt. + Documentation/devicetree/bindings/pci/snps,dw-pcie-ep.yaml. maintainers: - Kunihiko Hayashi <hayashi.kunihiko@socionext.com> -allOf: - - $ref: "pci-ep.yaml#" - properties: compatible: - const: socionext,uniphier-pro5-pcie-ep + enum: + - socionext,uniphier-pro5-pcie-ep + - socionext,uniphier-nx1-pcie-ep reg: - maxItems: 4 + minItems: 4 + maxItems: 5 reg-names: + minItems: 4 items: - const: dbi - const: dbi2 - const: link - const: addr_space + - const: atu clocks: + minItems: 1 maxItems: 2 - clock-names: - items: - - const: gio - - const: link + clock-names: true resets: + minItems: 1 maxItems: 2 - reset-names: - items: - - const: gio - - const: link + reset-names: true num-ib-windows: const: 16 @@ -62,6 +60,46 @@ properties: phy-names: const: pcie-phy +allOf: + - $ref: /schemas/pci/snps,dw-pcie-ep.yaml# + - if: + properties: + compatible: + contains: + const: socionext,uniphier-pro5-pcie-ep + then: + properties: + reg: + maxItems: 4 + reg-names: + maxItems: 4 + clocks: + minItems: 2 + clock-names: + items: + - const: gio + - const: link + resets: + minItems: 2 + reset-names: + items: + - const: gio + - const: link + else: + properties: + reg: + minItems: 5 + reg-names: + minItems: 5 + clocks: + maxItems: 1 + clock-names: + const: link + resets: + maxItems: 1 + reset-names: + const: link + required: - compatible - reg @@ -71,7 +109,7 @@ required: - resets - reset-names -additionalProperties: false +unevaluatedProperties: false examples: - | diff --git a/dts/Bindings/pci/socionext,uniphier-pcie.yaml b/dts/Bindings/pci/socionext,uniphier-pcie.yaml new file mode 100644 index 0000000000..638b99db04 --- /dev/null +++ b/dts/Bindings/pci/socionext,uniphier-pcie.yaml @@ -0,0 +1,117 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pci/socionext,uniphier-pcie.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Socionext UniPhier PCIe host controller + +description: | + UniPhier PCIe host controller is based on the Synopsys DesignWare + PCI core. It shares common features with the PCIe DesignWare core and + inherits common properties defined in + Documentation/devicetree/bindings/pci/snps,dw-pcie.yaml. + +maintainers: + - Kunihiko Hayashi <hayashi.kunihiko@socionext.com> + +allOf: + - $ref: /schemas/pci/snps,dw-pcie.yaml# + +properties: + compatible: + enum: + - socionext,uniphier-pcie + + reg: + minItems: 3 + maxItems: 4 + + reg-names: + minItems: 3 + items: + - const: dbi + - const: link + - const: config + - const: atu + + clocks: + maxItems: 1 + + resets: + maxItems: 1 + + num-viewport: true + + num-lanes: true + + phys: + maxItems: 1 + + phy-names: + const: pcie-phy + + interrupt-controller: + type: object + additionalProperties: false + + properties: + interrupt-controller: true + + '#interrupt-cells': + const: 1 + + interrupts: + maxItems: 1 + +required: + - compatible + - reg + - reg-names + - clocks + - resets + +unevaluatedProperties: false + +examples: + - | + bus { + gic: interrupt-controller { + interrupt-controller; + #interrupt-cells = <3>; + }; + }; + + pcie: pcie@66000000 { + compatible = "socionext,uniphier-pcie"; + reg-names = "dbi", "link", "config"; + reg = <0x66000000 0x1000>, <0x66010000 0x10000>, <0x2fff0000 0x10000>; + #address-cells = <3>; + #size-cells = <2>; + clocks = <&sys_clk 24>; + resets = <&sys_rst 24>; + num-lanes = <1>; + num-viewport = <1>; + bus-range = <0x0 0xff>; + device_type = "pci"; + ranges = <0x81000000 0 0x00000000 0x2ffe0000 0 0x00010000>, + <0x82000000 0 0x00000000 0x20000000 0 0x0ffe0000>; + phy-names = "pcie-phy"; + phys = <&pcie_phy>; + #interrupt-cells = <1>; + interrupt-names = "dma", "msi"; + interrupt-parent = <&gic>; + interrupts = <0 224 4>, <0 225 4>; + interrupt-map-mask = <0 0 0 7>; + interrupt-map = <0 0 0 1 &pcie_intc 0>, + <0 0 0 2 &pcie_intc 1>, + <0 0 0 3 &pcie_intc 2>, + <0 0 0 4 &pcie_intc 3>; + + pcie_intc: interrupt-controller { + interrupt-controller; + #interrupt-cells = <1>; + interrupt-parent = <&gic>; + interrupts = <0 226 4>; + }; + }; diff --git a/dts/Bindings/pci/tango-pcie.txt b/dts/Bindings/pci/tango-pcie.txt deleted file mode 100644 index 244683836a..0000000000 --- a/dts/Bindings/pci/tango-pcie.txt +++ /dev/null @@ -1,29 +0,0 @@ -Sigma Designs Tango PCIe controller - -Required properties: - -- compatible: "sigma,smp8759-pcie" -- reg: address/size of PCI configuration space, address/size of register area -- bus-range: defined by size of PCI configuration space -- device_type: "pci" -- #size-cells: <2> -- #address-cells: <3> -- msi-controller -- ranges: translation from system to bus addresses -- interrupts: spec for misc interrupts, spec for MSI - -Example: - - pcie@2e000 { - compatible = "sigma,smp8759-pcie"; - reg = <0x50000000 0x400000>, <0x2e000 0x100>; - bus-range = <0 3>; - device_type = "pci"; - #size-cells = <2>; - #address-cells = <3>; - msi-controller; - ranges = <0x02000000 0x0 0x00400000 0x50400000 0x0 0x3c00000>; - interrupts = - <54 IRQ_TYPE_LEVEL_HIGH>, /* misc interrupts */ - <55 IRQ_TYPE_LEVEL_HIGH>; /* MSI */ - }; diff --git a/dts/Bindings/pci/ti,am65-pci-ep.yaml b/dts/Bindings/pci/ti,am65-pci-ep.yaml new file mode 100644 index 0000000000..74195c1f52 --- /dev/null +++ b/dts/Bindings/pci/ti,am65-pci-ep.yaml @@ -0,0 +1,76 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +# Copyright (C) 2021 Texas Instruments Incorporated - http://www.ti.com/ +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pci/ti,am65-pci-ep.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: TI AM65 PCI Endpoint + +maintainers: + - Kishon Vijay Abraham I <kishon@ti.com> + +allOf: + - $ref: pci-ep.yaml# + +properties: + compatible: + enum: + - ti,am654-pcie-ep + + reg: + maxItems: 4 + + reg-names: + items: + - const: app + - const: dbics + - const: addr_space + - const: atu + + power-domains: + maxItems: 1 + + ti,syscon-pcie-mode: + $ref: /schemas/types.yaml#/definitions/phandle-array + items: + - items: + - description: Phandle to the SYSCON entry + - description: pcie_ctrl register offset within SYSCON + description: Phandle to the SYSCON entry required for configuring PCIe in RC or EP mode. + + interrupts: + minItems: 1 + + dma-coherent: true + +required: + - compatible + - reg + - reg-names + - max-link-speed + - power-domains + - ti,syscon-pcie-mode + - dma-coherent + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/interrupt-controller/irq.h> + #include <dt-bindings/soc/ti,sci_pm_domain.h> + + pcie0_ep: pcie-ep@5500000 { + compatible = "ti,am654-pcie-ep"; + reg = <0x5500000 0x1000>, + <0x5501000 0x1000>, + <0x10000000 0x8000000>, + <0x5506000 0x1000>; + reg-names = "app", "dbics", "addr_space", "atu"; + power-domains = <&k3_pds 120 TI_SCI_PD_EXCLUSIVE>; + ti,syscon-pcie-mode = <&scm_conf 0x4060>; + max-link-speed = <2>; + dma-coherent; + interrupts = <GIC_SPI 340 IRQ_TYPE_EDGE_RISING>; + }; diff --git a/dts/Bindings/pci/ti,am65-pci-host.yaml b/dts/Bindings/pci/ti,am65-pci-host.yaml new file mode 100644 index 0000000000..a20dccbafd --- /dev/null +++ b/dts/Bindings/pci/ti,am65-pci-host.yaml @@ -0,0 +1,106 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +# Copyright (C) 2021 Texas Instruments Incorporated - http://www.ti.com/ +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pci/ti,am65-pci-host.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: TI AM65 PCI Host + +maintainers: + - Kishon Vijay Abraham I <kishon@ti.com> + +allOf: + - $ref: /schemas/pci/pci-bus.yaml# + +properties: + compatible: + enum: + - ti,am654-pcie-rc + - ti,keystone-pcie + + reg: + maxItems: 4 + + reg-names: + items: + - const: app + - const: dbics + - const: config + - const: atu + + interrupts: + maxItems: 1 + + power-domains: + maxItems: 1 + + ti,syscon-pcie-id: + $ref: /schemas/types.yaml#/definitions/phandle-array + items: + - items: + - description: Phandle to the SYSCON entry + - description: pcie_device_id register offset within SYSCON + description: Phandle to the SYSCON entry required for getting PCIe device/vendor ID + + ti,syscon-pcie-mode: + $ref: /schemas/types.yaml#/definitions/phandle-array + items: + - items: + - description: Phandle to the SYSCON entry + - description: pcie_ctrl register offset within SYSCON + description: Phandle to the SYSCON entry required for configuring PCIe in RC or EP mode. + + msi-map: true + + dma-coherent: true + +required: + - compatible + - reg + - reg-names + - max-link-speed + - ti,syscon-pcie-id + - ti,syscon-pcie-mode + - ranges + +if: + properties: + compatible: + enum: + - ti,am654-pcie-rc +then: + required: + - dma-coherent + - power-domains + - msi-map + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/interrupt-controller/irq.h> + #include <dt-bindings/soc/ti,sci_pm_domain.h> + + pcie0_rc: pcie@5500000 { + compatible = "ti,am654-pcie-rc"; + reg = <0x5500000 0x1000>, + <0x5501000 0x1000>, + <0x10000000 0x2000>, + <0x5506000 0x1000>; + reg-names = "app", "dbics", "config", "atu"; + power-domains = <&k3_pds 120 TI_SCI_PD_EXCLUSIVE>; + #address-cells = <3>; + #size-cells = <2>; + ranges = <0x81000000 0 0 0x10020000 0 0x00010000>, + <0x82000000 0 0x10030000 0x10030000 0 0x07FD0000>; + ti,syscon-pcie-id = <&scm_conf 0x0210>; + ti,syscon-pcie-mode = <&scm_conf 0x4060>; + bus-range = <0x0 0xff>; + max-link-speed = <2>; + dma-coherent; + interrupts = <GIC_SPI 340 IRQ_TYPE_EDGE_RISING>; + msi-map = <0x0 &gic_its 0x0 0x10000>; + device_type = "pci"; + }; diff --git a/dts/Bindings/pci/ti,j721e-pci-ep.yaml b/dts/Bindings/pci/ti,j721e-pci-ep.yaml index b3c3d0c3c3..97f2579ea9 100644 --- a/dts/Bindings/pci/ti,j721e-pci-ep.yaml +++ b/dts/Bindings/pci/ti,j721e-pci-ep.yaml @@ -2,21 +2,27 @@ # Copyright (C) 2020 Texas Instruments Incorporated - http://www.ti.com/ %YAML 1.2 --- -$id: "http://devicetree.org/schemas/pci/ti,j721e-pci-ep.yaml#" -$schema: "http://devicetree.org/meta-schemas/core.yaml#" +$id: http://devicetree.org/schemas/pci/ti,j721e-pci-ep.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# title: TI J721E PCI EP (PCIe Wrapper) maintainers: - Kishon Vijay Abraham I <kishon@ti.com> -allOf: - - $ref: "cdns-pcie-ep.yaml#" - properties: compatible: - enum: - - ti,j721e-pcie-ep + oneOf: + - const: ti,j721e-pcie-ep + - const: ti,j784s4-pcie-ep + - description: PCIe EP controller in AM64 + items: + - const: ti,am64-pcie-ep + - const: ti,j721e-pcie-ep + - description: PCIe EP controller in J7200 + items: + - const: ti,j7200-pcie-ep + - const: ti,j721e-pcie-ep reg: maxItems: 4 @@ -29,9 +35,12 @@ properties: - const: mem ti,syscon-pcie-ctrl: - description: Phandle to the SYSCON entry required for configuring PCIe mode - and link speed. - $ref: /schemas/types.yaml#/definitions/phandle + $ref: /schemas/types.yaml#/definitions/phandle-array + items: + - items: + - description: Phandle to the SYSCON entry + - description: pcie_ctrl register offset within SYSCON + description: Specifier for configuring PCIe mode and link speed. power-domains: maxItems: 1 @@ -47,6 +56,48 @@ properties: dma-coherent: description: Indicates that the PCIe IP block can ensure the coherency + interrupts: + maxItems: 1 + + interrupt-names: + items: + - const: link_state + +allOf: + - $ref: cdns-pcie-ep.yaml# + - if: + properties: + compatible: + enum: + - ti,am64-pcie-ep + then: + properties: + num-lanes: + const: 1 + + - if: + properties: + compatible: + enum: + - ti,j7200-pcie-ep + - ti,j721e-pcie-ep + then: + properties: + num-lanes: + minimum: 1 + maximum: 2 + + - if: + properties: + compatible: + enum: + - ti,j784s4-pcie-ep + then: + properties: + num-lanes: + minimum: 1 + maximum: 4 + required: - compatible - reg @@ -57,12 +108,12 @@ required: - power-domains - clocks - clock-names - - cdns,max-outbound-regions - - dma-coherent - max-functions - phys - phy-names +unevaluatedProperties: false + examples: - | #include <dt-bindings/soc/ti,sci_pm_domain.h> @@ -78,13 +129,12 @@ examples: <0x00 0x0d000000 0x00 0x00800000>, <0x00 0x10000000 0x00 0x08000000>; reg-names = "intd_cfg", "user_cfg", "reg", "mem"; - ti,syscon-pcie-ctrl = <&pcie0_ctrl>; + ti,syscon-pcie-ctrl = <&pcie0_ctrl 0x4070>; max-link-speed = <3>; num-lanes = <2>; power-domains = <&k3_pds 239 TI_SCI_PD_EXCLUSIVE>; clocks = <&k3_clks 239 1>; clock-names = "fck"; - cdns,max-outbound-regions = <16>; max-functions = /bits/ 8 <6>; dma-coherent; phys = <&serdes0_pcie_link>; diff --git a/dts/Bindings/pci/ti,j721e-pci-host.yaml b/dts/Bindings/pci/ti,j721e-pci-host.yaml index 8200ba00bc..b7a534cef2 100644 --- a/dts/Bindings/pci/ti,j721e-pci-host.yaml +++ b/dts/Bindings/pci/ti,j721e-pci-host.yaml @@ -2,21 +2,27 @@ # Copyright (C) 2019 Texas Instruments Incorporated - http://www.ti.com/ %YAML 1.2 --- -$id: "http://devicetree.org/schemas/pci/ti,j721e-pci-host.yaml#" -$schema: "http://devicetree.org/meta-schemas/core.yaml#" +$id: http://devicetree.org/schemas/pci/ti,j721e-pci-host.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# title: TI J721E PCI Host (PCIe Wrapper) maintainers: - Kishon Vijay Abraham I <kishon@ti.com> -allOf: - - $ref: "cdns-pcie-host.yaml#" - properties: compatible: - enum: - - ti,j721e-pcie-host + oneOf: + - const: ti,j721e-pcie-host + - const: ti,j784s4-pcie-host + - description: PCIe controller in AM64 + items: + - const: ti,am64-pcie-host + - const: ti,j721e-pcie-host + - description: PCIe controller in J7200 + items: + - const: ti,j7200-pcie-host + - const: ti,j721e-pcie-host reg: maxItems: 4 @@ -29,29 +35,98 @@ properties: - const: cfg ti,syscon-pcie-ctrl: - description: Phandle to the SYSCON entry required for configuring PCIe mode - and link speed. - $ref: /schemas/types.yaml#/definitions/phandle + $ref: /schemas/types.yaml#/definitions/phandle-array + items: + - items: + - description: Phandle to the SYSCON entry + - description: pcie_ctrl register offset within SYSCON + description: Specifier for configuring PCIe mode and link speed. power-domains: maxItems: 1 clocks: - maxItems: 1 - description: clock-specifier to represent input to the PCIe + minItems: 1 + maxItems: 2 + description: |+ + clock-specifier to represent input to the PCIe for 1 item. + 2nd item if present represents reference clock to the connector. clock-names: + minItems: 1 items: - const: fck + - const: pcie_refclk + + dma-coherent: true vendor-id: const: 0x104c device-id: - const: 0xb00d + enum: + - 0xb00d + - 0xb00f + - 0xb010 + - 0xb013 msi-map: true + interrupts: + maxItems: 1 + + interrupt-names: + items: + - const: link_state + + interrupt-controller: + type: object + additionalProperties: false + + properties: + interrupt-controller: true + + '#interrupt-cells': + const: 1 + + interrupts: + maxItems: 1 + +allOf: + - $ref: cdns-pcie-host.yaml# + - if: + properties: + compatible: + enum: + - ti,am64-pcie-host + then: + properties: + num-lanes: + const: 1 + + - if: + properties: + compatible: + enum: + - ti,j7200-pcie-host + - ti,j721e-pcie-host + then: + properties: + num-lanes: + minimum: 1 + maximum: 2 + + - if: + properties: + compatible: + enum: + - ti,j784s4-pcie-host + then: + properties: + num-lanes: + minimum: 1 + maximum: 4 + required: - compatible - reg @@ -65,13 +140,14 @@ required: - vendor-id - device-id - msi-map - - dma-coherent - dma-ranges - ranges - reset-gpios - phys - phy-names +unevaluatedProperties: false + examples: - | #include <dt-bindings/soc/ti,sci_pm_domain.h> @@ -88,7 +164,7 @@ examples: <0x00 0x0d000000 0x00 0x00800000>, <0x00 0x10000000 0x00 0x00001000>; reg-names = "intd_cfg", "user_cfg", "reg", "cfg"; - ti,syscon-pcie-ctrl = <&pcie0_ctrl>; + ti,syscon-pcie-ctrl = <&pcie0_ctrl 0x4070>; max-link-speed = <3>; num-lanes = <2>; power-domains = <&k3_pds 239 TI_SCI_PD_EXCLUSIVE>; diff --git a/dts/Bindings/pci/ti-pci.txt b/dts/Bindings/pci/ti-pci.txt index d5cbfe6b0d..8147e3e3e2 100644 --- a/dts/Bindings/pci/ti-pci.txt +++ b/dts/Bindings/pci/ti-pci.txt @@ -12,7 +12,7 @@ PCIe DesignWare Controller number of PHYs as specified in *phys* property. - ti,hwmods : Name of the hwmod associated to the pcie, "pcie<X>", where <X> is the instance number of the pcie from the HW spec. - - num-lanes as specified in ../designware-pcie.txt + - num-lanes as specified in ../snps,dw-pcie.yaml - ti,syscon-lane-sel : phandle/offset pair. Phandle to the system control module and the register offset to specify lane selection. @@ -32,7 +32,7 @@ HOST MODE device_type, ranges, interrupt-map-mask, - interrupt-map : as specified in ../designware-pcie.txt + interrupt-map : as specified in ../snps,dw-pcie.yaml - ti,syscon-unaligned-access: phandle to the syscon DT node. The 1st argument should contain the register offset within syscon and the 2nd argument should contain the bit field diff --git a/dts/Bindings/pci/toshiba,visconti-pcie.yaml b/dts/Bindings/pci/toshiba,visconti-pcie.yaml new file mode 100644 index 0000000000..120e3bb1e5 --- /dev/null +++ b/dts/Bindings/pci/toshiba,visconti-pcie.yaml @@ -0,0 +1,111 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pci/toshiba,visconti-pcie.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Toshiba Visconti5 SoC PCIe Host Controller + +maintainers: + - Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp> + +description: + Toshiba Visconti5 SoC PCIe host controller is based on the Synopsys DesignWare PCIe IP. + +allOf: + - $ref: /schemas/pci/snps,dw-pcie.yaml# + +properties: + compatible: + const: toshiba,visconti-pcie + + reg: + items: + - description: Data Bus Interface (DBI) registers. + - description: PCIe configuration space region. + - description: Visconti specific additional registers. + - description: Visconti specific SMU registers + - description: Visconti specific memory protection unit registers (MPU) + + reg-names: + items: + - const: dbi + - const: config + - const: ulreg + - const: smu + - const: mpu + + interrupts: + maxItems: 2 + + clocks: + items: + - description: PCIe reference clock + - description: PCIe system clock + - description: Auxiliary clock + + clock-names: + items: + - const: ref + - const: core + - const: aux + + num-lanes: + const: 2 + +required: + - reg + - reg-names + - interrupts + - "#interrupt-cells" + - interrupt-map + - interrupt-map-mask + - num-lanes + - clocks + - clock-names + - max-link-speed + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + + soc { + #address-cells = <2>; + #size-cells = <2>; + + pcie: pcie@28400000 { + compatible = "toshiba,visconti-pcie"; + reg = <0x0 0x28400000 0x0 0x00400000>, + <0x0 0x70000000 0x0 0x10000000>, + <0x0 0x28050000 0x0 0x00010000>, + <0x0 0x24200000 0x0 0x00002000>, + <0x0 0x24162000 0x0 0x00001000>; + reg-names = "dbi", "config", "ulreg", "smu", "mpu"; + device_type = "pci"; + bus-range = <0x00 0xff>; + num-lanes = <2>; + num-viewport = <8>; + + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + ranges = <0x81000000 0 0x40000000 0 0x40000000 0 0x00010000>, + <0x82000000 0 0x50000000 0 0x50000000 0 0x20000000>; + interrupts = <GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "msi", "intr"; + interrupt-map-mask = <0 0 0 7>; + interrupt-map = + <0 0 0 1 &gic GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH + 0 0 0 2 &gic GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH + 0 0 0 3 &gic GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH + 0 0 0 4 &gic GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&extclk100mhz>, <&clk600mhz>, <&clk25mhz>; + clock-names = "ref", "core", "aux"; + max-link-speed = <2>; + }; + }; +... diff --git a/dts/Bindings/pci/uniphier-pcie.txt b/dts/Bindings/pci/uniphier-pcie.txt deleted file mode 100644 index 1fa2c5906d..0000000000 --- a/dts/Bindings/pci/uniphier-pcie.txt +++ /dev/null @@ -1,81 +0,0 @@ -Socionext UniPhier PCIe host controller bindings - -This describes the devicetree bindings for PCIe host controller implemented -on Socionext UniPhier SoCs. - -UniPhier PCIe host controller is based on the Synopsys DesignWare PCI core. -It shares common functions with the PCIe DesignWare core driver and inherits -common properties defined in -Documentation/devicetree/bindings/pci/designware-pcie.txt. - -Required properties: -- compatible: Should be "socionext,uniphier-pcie". -- reg: Specifies offset and length of the register set for the device. - According to the reg-names, appropriate register sets are required. -- reg-names: Must include the following entries: - "dbi" - controller configuration registers - "link" - SoC-specific glue layer registers - "config" - PCIe configuration space -- clocks: A phandle to the clock gate for PCIe glue layer including - the host controller. -- resets: A phandle to the reset line for PCIe glue layer including - the host controller. -- interrupts: A list of interrupt specifiers. According to the - interrupt-names, appropriate interrupts are required. -- interrupt-names: Must include the following entries: - "dma" - DMA interrupt - "msi" - MSI interrupt - -Optional properties: -- phys: A phandle to generic PCIe PHY. According to the phy-names, appropriate - phys are required. -- phy-names: Must be "pcie-phy". - -Required sub-node: -- legacy-interrupt-controller: Specifies interrupt controller for legacy PCI - interrupts. - -Required properties for legacy-interrupt-controller: -- interrupt-controller: identifies the node as an interrupt controller. -- #interrupt-cells: specifies the number of cells needed to encode an - interrupt source. The value must be 1. -- interrupt-parent: Phandle to the parent interrupt controller. -- interrupts: An interrupt specifier for legacy interrupt. - -Example: - - pcie: pcie@66000000 { - compatible = "socionext,uniphier-pcie", "snps,dw-pcie"; - status = "disabled"; - reg-names = "dbi", "link", "config"; - reg = <0x66000000 0x1000>, <0x66010000 0x10000>, - <0x2fff0000 0x10000>; - #address-cells = <3>; - #size-cells = <2>; - clocks = <&sys_clk 24>; - resets = <&sys_rst 24>; - num-lanes = <1>; - num-viewport = <1>; - bus-range = <0x0 0xff>; - device_type = "pci"; - ranges = - /* downstream I/O */ - <0x81000000 0 0x00000000 0x2ffe0000 0 0x00010000 - /* non-prefetchable memory */ - 0x82000000 0 0x00000000 0x20000000 0 0x0ffe0000>; - #interrupt-cells = <1>; - interrupt-names = "dma", "msi"; - interrupts = <0 224 4>, <0 225 4>; - interrupt-map-mask = <0 0 0 7>; - interrupt-map = <0 0 0 1 &pcie_intc 0>, /* INTA */ - <0 0 0 2 &pcie_intc 1>, /* INTB */ - <0 0 0 3 &pcie_intc 2>, /* INTC */ - <0 0 0 4 &pcie_intc 3>; /* INTD */ - - pcie_intc: legacy-interrupt-controller { - interrupt-controller; - #interrupt-cells = <1>; - interrupt-parent = <&gic>; - interrupts = <0 226 4>; - }; - }; diff --git a/dts/Bindings/pci/versatile.yaml b/dts/Bindings/pci/versatile.yaml index 07a48c27db..09748ef6b9 100644 --- a/dts/Bindings/pci/versatile.yaml +++ b/dts/Bindings/pci/versatile.yaml @@ -48,6 +48,8 @@ required: - interrupt-map - interrupt-map-mask +unevaluatedProperties: false + examples: - | pci@10001000 { diff --git a/dts/Bindings/pci/xilinx-nwl-pcie.txt b/dts/Bindings/pci/xilinx-nwl-pcie.txt deleted file mode 100644 index 01bf7fdf4c..0000000000 --- a/dts/Bindings/pci/xilinx-nwl-pcie.txt +++ /dev/null @@ -1,70 +0,0 @@ -* Xilinx NWL PCIe Root Port Bridge DT description - -Required properties: -- compatible: Should contain "xlnx,nwl-pcie-2.11" -- #address-cells: Address representation for root ports, set to <3> -- #size-cells: Size representation for root ports, set to <2> -- #interrupt-cells: specifies the number of cells needed to encode an - interrupt source. The value must be 1. -- reg: Should contain Bridge, PCIe Controller registers location, - configuration space, and length -- reg-names: Must include the following entries: - "breg": bridge registers - "pcireg": PCIe controller registers - "cfg": configuration space region -- device_type: must be "pci" -- interrupts: Should contain NWL PCIe interrupt -- interrupt-names: Must include the following entries: - "msi1, msi0": interrupt asserted when an MSI is received - "intx": interrupt asserted when a legacy interrupt is received - "misc": interrupt asserted when miscellaneous interrupt is received -- interrupt-map-mask and interrupt-map: standard PCI properties to define the - mapping of the PCI interface to interrupt numbers. -- ranges: ranges for the PCI memory regions (I/O space region is not - supported by hardware) - Please refer to the standard PCI bus binding document for a more - detailed explanation -- msi-controller: indicates that this is MSI controller node -- msi-parent: MSI parent of the root complex itself -- legacy-interrupt-controller: Interrupt controller device node for Legacy - interrupts - - interrupt-controller: identifies the node as an interrupt controller - - #interrupt-cells: should be set to 1 - - #address-cells: specifies the number of cells needed to encode an - address. The value must be 0. - - -Example: -++++++++ - -nwl_pcie: pcie@fd0e0000 { - #address-cells = <3>; - #size-cells = <2>; - compatible = "xlnx,nwl-pcie-2.11"; - #interrupt-cells = <1>; - msi-controller; - device_type = "pci"; - interrupt-parent = <&gic>; - interrupts = <0 114 4>, <0 115 4>, <0 116 4>, <0 117 4>, <0 118 4>; - interrupt-names = "msi0", "msi1", "intx", "dummy", "misc"; - interrupt-map-mask = <0x0 0x0 0x0 0x7>; - interrupt-map = <0x0 0x0 0x0 0x1 &pcie_intc 0x1>, - <0x0 0x0 0x0 0x2 &pcie_intc 0x2>, - <0x0 0x0 0x0 0x3 &pcie_intc 0x3>, - <0x0 0x0 0x0 0x4 &pcie_intc 0x4>; - - msi-parent = <&nwl_pcie>; - reg = <0x0 0xfd0e0000 0x0 0x1000>, - <0x0 0xfd480000 0x0 0x1000>, - <0x80 0x00000000 0x0 0x1000000>; - reg-names = "breg", "pcireg", "cfg"; - ranges = <0x02000000 0x00000000 0xe0000000 0x00000000 0xe0000000 0x00000000 0x10000000 /* non-prefetchable memory */ - 0x43000000 0x00000006 0x00000000 0x00000006 0x00000000 0x00000002 0x00000000>;/* prefetchable memory */ - - pcie_intc: legacy-interrupt-controller { - interrupt-controller; - #address-cells = <0>; - #interrupt-cells = <1>; - }; - -}; diff --git a/dts/Bindings/pci/xilinx-pcie.txt b/dts/Bindings/pci/xilinx-pcie.txt deleted file mode 100644 index fd57a81180..0000000000 --- a/dts/Bindings/pci/xilinx-pcie.txt +++ /dev/null @@ -1,88 +0,0 @@ -* Xilinx AXI PCIe Root Port Bridge DT description - -Required properties: -- #address-cells: Address representation for root ports, set to <3> -- #size-cells: Size representation for root ports, set to <2> -- #interrupt-cells: specifies the number of cells needed to encode an - interrupt source. The value must be 1. -- compatible: Should contain "xlnx,axi-pcie-host-1.00.a" -- reg: Should contain AXI PCIe registers location and length -- device_type: must be "pci" -- interrupts: Should contain AXI PCIe interrupt -- interrupt-map-mask, - interrupt-map: standard PCI properties to define the mapping of the - PCI interface to interrupt numbers. -- ranges: ranges for the PCI memory regions (I/O space region is not - supported by hardware) - Please refer to the standard PCI bus binding document for a more - detailed explanation - -Optional properties for Zynq/Microblaze: -- bus-range: PCI bus numbers covered - -Interrupt controller child node -+++++++++++++++++++++++++++++++ -Required properties: -- interrupt-controller: identifies the node as an interrupt controller -- #address-cells: specifies the number of cells needed to encode an - address. The value must be 0. -- #interrupt-cells: specifies the number of cells needed to encode an - interrupt source. The value must be 1. - -NOTE: -The core provides a single interrupt for both INTx/MSI messages. So, -created a interrupt controller node to support 'interrupt-map' DT -functionality. The driver will create an IRQ domain for this map, decode -the four INTx interrupts in ISR and route them to this domain. - - -Example: -++++++++ -Zynq: - pci_express: axi-pcie@50000000 { - #address-cells = <3>; - #size-cells = <2>; - #interrupt-cells = <1>; - compatible = "xlnx,axi-pcie-host-1.00.a"; - reg = < 0x50000000 0x1000000 >; - device_type = "pci"; - interrupts = < 0 52 4 >; - interrupt-map-mask = <0 0 0 7>; - interrupt-map = <0 0 0 1 &pcie_intc 1>, - <0 0 0 2 &pcie_intc 2>, - <0 0 0 3 &pcie_intc 3>, - <0 0 0 4 &pcie_intc 4>; - ranges = < 0x02000000 0 0x60000000 0x60000000 0 0x10000000 >; - - pcie_intc: interrupt-controller { - interrupt-controller; - #address-cells = <0>; - #interrupt-cells = <1>; - }; - }; - - -Microblaze: - pci_express: axi-pcie@10000000 { - #address-cells = <3>; - #size-cells = <2>; - #interrupt-cells = <1>; - compatible = "xlnx,axi-pcie-host-1.00.a"; - reg = <0x10000000 0x4000000>; - device_type = "pci"; - interrupt-parent = <µblaze_0_intc>; - interrupts = <1 2>; - interrupt-map-mask = <0 0 0 7>; - interrupt-map = <0 0 0 1 &pcie_intc 1>, - <0 0 0 2 &pcie_intc 2>, - <0 0 0 3 &pcie_intc 3>, - <0 0 0 4 &pcie_intc 4>; - ranges = <0x02000000 0x00000000 0x80000000 0x80000000 0x00000000 0x10000000>; - - pcie_intc: interrupt-controller { - interrupt-controller; - #address-cells = <0>; - #interrupt-cells = <1>; - }; - - }; diff --git a/dts/Bindings/pci/xilinx-versal-cpm.yaml b/dts/Bindings/pci/xilinx-versal-cpm.yaml index a2bbc0eb72..4734be456b 100644 --- a/dts/Bindings/pci/xilinx-versal-cpm.yaml +++ b/dts/Bindings/pci/xilinx-versal-cpm.yaml @@ -7,24 +7,30 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: CPM Host Controller device tree for Xilinx Versal SoCs maintainers: - - Bharat Kumar Gogada <bharat.kumar.gogada@xilinx.com> + - Bharat Kumar Gogada <bharat.kumar.gogada@amd.com> allOf: - $ref: /schemas/pci/pci-bus.yaml# properties: compatible: - const: xlnx,versal-cpm-host-1.00 + enum: + - xlnx,versal-cpm-host-1.00 + - xlnx,versal-cpm5-host reg: items: - - description: Configuration space region and bridge registers. - description: CPM system level control and status registers. + - description: Configuration space region and bridge registers. + - description: CPM5 control and status registers. + minItems: 2 reg-names: items: - - const: cfg - const: cpm_slcr + - const: cfg + - const: cpm_csr + minItems: 2 interrupts: maxItems: 1 @@ -55,7 +61,6 @@ required: - reg-names - "#interrupt-cells" - interrupts - - interrupt-parent - interrupt-map - interrupt-map-mask - bus-range @@ -87,13 +92,43 @@ examples: ranges = <0x02000000 0x0 0xe0000000 0x0 0xe0000000 0x0 0x10000000>, <0x43000000 0x80 0x00000000 0x80 0x00000000 0x0 0x80000000>; msi-map = <0x0 &its_gic 0x0 0x10000>; - reg = <0x6 0x00000000 0x0 0x10000000>, - <0x0 0xfca10000 0x0 0x1000>; - reg-names = "cfg", "cpm_slcr"; + reg = <0x0 0xfca10000 0x0 0x1000>, + <0x6 0x00000000 0x0 0x10000000>; + reg-names = "cpm_slcr", "cfg"; pcie_intc_0: interrupt-controller { #address-cells = <0>; #interrupt-cells = <1>; interrupt-controller; }; }; + + cpm5_pcie: pcie@fcdd0000 { + compatible = "xlnx,versal-cpm5-host"; + device_type = "pci"; + #address-cells = <3>; + #interrupt-cells = <1>; + #size-cells = <2>; + interrupts = <0 72 4>; + interrupt-parent = <&gic>; + interrupt-map-mask = <0 0 0 7>; + interrupt-map = <0 0 0 1 &pcie_intc_1 0>, + <0 0 0 2 &pcie_intc_1 1>, + <0 0 0 3 &pcie_intc_1 2>, + <0 0 0 4 &pcie_intc_1 3>; + bus-range = <0x00 0xff>; + ranges = <0x02000000 0x0 0xe0000000 0x0 0xe0000000 0x0 0x10000000>, + <0x43000000 0x80 0x00000000 0x80 0x00000000 0x0 0x80000000>; + msi-map = <0x0 &its_gic 0x0 0x10000>; + reg = <0x00 0xfcdd0000 0x00 0x1000>, + <0x06 0x00000000 0x00 0x1000000>, + <0x00 0xfce20000 0x00 0x1000000>; + reg-names = "cpm_slcr", "cfg", "cpm_csr"; + + pcie_intc_1: interrupt-controller { + #address-cells = <0>; + #interrupt-cells = <1>; + interrupt-controller; + }; + }; + }; diff --git a/dts/Bindings/pci/xlnx,axi-pcie-host.yaml b/dts/Bindings/pci/xlnx,axi-pcie-host.yaml new file mode 100644 index 0000000000..69b7decabd --- /dev/null +++ b/dts/Bindings/pci/xlnx,axi-pcie-host.yaml @@ -0,0 +1,88 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pci/xlnx,axi-pcie-host.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Xilinx AXI PCIe Root Port Bridge + +maintainers: + - Thippeswamy Havalige <thippeswamy.havalige@amd.com> + +allOf: + - $ref: /schemas/pci/pci-bus.yaml# + +properties: + compatible: + const: xlnx,axi-pcie-host-1.00.a + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + ranges: + items: + - description: | + ranges for the PCI memory regions (I/O space region is not + supported by hardware) + + "#interrupt-cells": + const: 1 + + interrupt-controller: + description: identifies the node as an interrupt controller + type: object + properties: + interrupt-controller: true + + "#address-cells": + const: 0 + + "#interrupt-cells": + const: 1 + + required: + - interrupt-controller + - "#address-cells" + - "#interrupt-cells" + + additionalProperties: false + +required: + - compatible + - reg + - ranges + - interrupts + - interrupt-map + - "#interrupt-cells" + - interrupt-controller + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/interrupt-controller/irq.h> + + pcie@50000000 { + compatible = "xlnx,axi-pcie-host-1.00.a"; + reg = <0x50000000 0x1000000>; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + device_type = "pci"; + interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>; + interrupt-map-mask = <0 0 0 7>; + interrupt-map = <0 0 0 1 &pcie_intc 1>, + <0 0 0 2 &pcie_intc 2>, + <0 0 0 3 &pcie_intc 3>, + <0 0 0 4 &pcie_intc 4>; + ranges = <0x02000000 0 0x60000000 0x60000000 0 0x10000000>; + pcie_intc: interrupt-controller { + interrupt-controller; + #address-cells = <0>; + #interrupt-cells = <1>; + }; + }; diff --git a/dts/Bindings/pci/xlnx,nwl-pcie.yaml b/dts/Bindings/pci/xlnx,nwl-pcie.yaml new file mode 100644 index 0000000000..426f90a47f --- /dev/null +++ b/dts/Bindings/pci/xlnx,nwl-pcie.yaml @@ -0,0 +1,149 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pci/xlnx,nwl-pcie.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Xilinx NWL PCIe Root Port Bridge + +maintainers: + - Thippeswamy Havalige <thippeswamy.havalige@amd.com> + +allOf: + - $ref: /schemas/pci/pci-bus.yaml# + - $ref: /schemas/interrupt-controller/msi-controller.yaml# + +properties: + compatible: + const: xlnx,nwl-pcie-2.11 + + reg: + items: + - description: PCIe bridge registers location. + - description: PCIe Controller registers location. + - description: PCIe Configuration space region. + + reg-names: + items: + - const: breg + - const: pcireg + - const: cfg + + interrupts: + items: + - description: interrupt asserted when miscellaneous interrupt is received + - description: unused interrupt(dummy) + - description: interrupt asserted when a legacy interrupt is received + - description: msi1 interrupt asserted when an MSI is received + - description: msi0 interrupt asserted when an MSI is received + + interrupt-names: + items: + - const: misc + - const: dummy + - const: intx + - const: msi1 + - const: msi0 + + interrupt-map-mask: + items: + - const: 0 + - const: 0 + - const: 0 + - const: 7 + + "#interrupt-cells": + const: 1 + + msi-parent: + description: MSI controller the device is capable of using. + + interrupt-map: + maxItems: 4 + + power-domains: + maxItems: 1 + + iommus: + maxItems: 1 + + dma-coherent: + description: optional, only needed if DMA operations are coherent. + + clocks: + maxItems: 1 + description: optional, input clock specifier. + + legacy-interrupt-controller: + description: Interrupt controller node for handling legacy PCI interrupts. + type: object + properties: + "#address-cells": + const: 0 + + "#interrupt-cells": + const: 1 + + "interrupt-controller": true + + required: + - "#address-cells" + - "#interrupt-cells" + - interrupt-controller + + additionalProperties: false + +required: + - compatible + - reg + - reg-names + - interrupts + - "#interrupt-cells" + - interrupt-map + - interrupt-map-mask + - msi-controller + - power-domains + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/interrupt-controller/irq.h> + #include <dt-bindings/power/xlnx-zynqmp-power.h> + soc { + #address-cells = <2>; + #size-cells = <2>; + nwl_pcie: pcie@fd0e0000 { + compatible = "xlnx,nwl-pcie-2.11"; + reg = <0x0 0xfd0e0000 0x0 0x1000>, + <0x0 0xfd480000 0x0 0x1000>, + <0x80 0x00000000 0x0 0x10000000>; + reg-names = "breg", "pcireg", "cfg"; + ranges = <0x02000000 0x0 0xe0000000 0x0 0xe0000000 0x0 0x10000000>, + <0x43000000 0x00000006 0x0 0x00000006 0x0 0x00000002 0x0>; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + msi-controller; + device_type = "pci"; + interrupt-parent = <&gic>; + interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 116 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 115 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "misc", "dummy", "intx", "msi1", "msi0"; + interrupt-map-mask = <0x0 0x0 0x0 0x7>; + interrupt-map = <0x0 0x0 0x0 0x1 &pcie_intc 0x1>, + <0x0 0x0 0x0 0x2 &pcie_intc 0x2>, + <0x0 0x0 0x0 0x3 &pcie_intc 0x3>, + <0x0 0x0 0x0 0x4 &pcie_intc 0x4>; + msi-parent = <&nwl_pcie>; + power-domains = <&zynqmp_firmware PD_PCIE>; + iommus = <&smmu 0x4d0>; + pcie_intc: legacy-interrupt-controller { + interrupt-controller; + #address-cells = <0>; + #interrupt-cells = <1>; + }; + }; + }; diff --git a/dts/Bindings/pci/xlnx,xdma-host.yaml b/dts/Bindings/pci/xlnx,xdma-host.yaml new file mode 100644 index 0000000000..0aa00b8e49 --- /dev/null +++ b/dts/Bindings/pci/xlnx,xdma-host.yaml @@ -0,0 +1,114 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pci/xlnx,xdma-host.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Xilinx XDMA PL PCIe Root Port Bridge + +maintainers: + - Thippeswamy Havalige <thippeswamy.havalige@amd.com> + +allOf: + - $ref: /schemas/pci/pci-bus.yaml# + +properties: + compatible: + const: xlnx,xdma-host-3.00 + + reg: + maxItems: 1 + + ranges: + maxItems: 2 + + interrupts: + items: + - description: interrupt asserted when miscellaneous interrupt is received. + - description: msi0 interrupt asserted when an MSI is received. + - description: msi1 interrupt asserted when an MSI is received. + + interrupt-names: + items: + - const: misc + - const: msi0 + - const: msi1 + + interrupt-map-mask: + items: + - const: 0 + - const: 0 + - const: 0 + - const: 7 + + interrupt-map: + maxItems: 4 + + "#interrupt-cells": + const: 1 + + interrupt-controller: + description: identifies the node as an interrupt controller + type: object + properties: + interrupt-controller: true + + "#address-cells": + const: 0 + + "#interrupt-cells": + const: 1 + + required: + - interrupt-controller + - "#address-cells" + - "#interrupt-cells" + + additionalProperties: false + +required: + - compatible + - reg + - ranges + - interrupts + - interrupt-map + - interrupt-map-mask + - "#interrupt-cells" + - interrupt-controller + +unevaluatedProperties: false + +examples: + + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/interrupt-controller/irq.h> + + soc { + #address-cells = <2>; + #size-cells = <2>; + pcie@a0000000 { + compatible = "xlnx,xdma-host-3.00"; + reg = <0x0 0xa0000000 0x0 0x10000000>; + ranges = <0x2000000 0x0 0xb0000000 0x0 0xb0000000 0x0 0x1000000>, + <0x43000000 0x5 0x0 0x5 0x0 0x0 0x1000000>; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + device_type = "pci"; + interrupt-parent = <&gic>; + interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "misc", "msi0", "msi1"; + interrupt-map-mask = <0x0 0x0 0x0 0x7>; + interrupt-map = <0 0 0 1 &pcie_intc_0 0>, + <0 0 0 2 &pcie_intc_0 1>, + <0 0 0 3 &pcie_intc_0 2>, + <0 0 0 4 &pcie_intc_0 3>; + pcie_intc_0: interrupt-controller { + #address-cells = <0>; + #interrupt-cells = <1>; + interrupt-controller; + }; + }; + }; |