summaryrefslogtreecommitdiffstats
path: root/dts/Bindings/phy/nvidia,tegra124-xusb-padctl.txt
diff options
context:
space:
mode:
Diffstat (limited to 'dts/Bindings/phy/nvidia,tegra124-xusb-padctl.txt')
-rw-r--r--dts/Bindings/phy/nvidia,tegra124-xusb-padctl.txt754
1 files changed, 0 insertions, 754 deletions
diff --git a/dts/Bindings/phy/nvidia,tegra124-xusb-padctl.txt b/dts/Bindings/phy/nvidia,tegra124-xusb-padctl.txt
deleted file mode 100644
index 9fb682e47c..0000000000
--- a/dts/Bindings/phy/nvidia,tegra124-xusb-padctl.txt
+++ /dev/null
@@ -1,754 +0,0 @@
-Device tree binding for NVIDIA Tegra XUSB pad controller
-========================================================
-
-The Tegra XUSB pad controller manages a set of I/O lanes (with differential
-signals) which connect directly to pins/pads on the SoC package. Each lane
-is controlled by a HW block referred to as a "pad" in the Tegra hardware
-documentation. Each such "pad" may control either one or multiple lanes,
-and thus contains any logic common to all its lanes. Each lane can be
-separately configured and powered up.
-
-Some of the lanes are high-speed lanes, which can be used for PCIe, SATA or
-super-speed USB. Other lanes are for various types of low-speed, full-speed
-or high-speed USB (such as UTMI, ULPI and HSIC). The XUSB pad controller
-contains a software-configurable mux that sits between the I/O controller
-ports (e.g. PCIe) and the lanes.
-
-In addition to per-lane configuration, USB 3.0 ports may require additional
-settings on a per-board basis.
-
-Pads will be represented as children of the top-level XUSB pad controller
-device tree node. Each lane exposed by the pad will be represented by its
-own subnode and can be referenced by users of the lane using the standard
-PHY bindings, as described by the phy-bindings.txt file in this directory.
-
-The Tegra hardware documentation refers to the connection between the XUSB
-pad controller and the XUSB controller as "ports". This is confusing since
-"port" is typically used to denote the physical USB receptacle. The device
-tree binding in this document uses the term "port" to refer to the logical
-abstraction of the signals that are routed to a USB receptacle (i.e. a PHY
-for the USB signal, the VBUS power supply, the USB 2.0 companion port for
-USB 3.0 receptacles, ...).
-
-Required properties:
---------------------
-- compatible: Must be:
- - Tegra124: "nvidia,tegra124-xusb-padctl"
- - Tegra132: "nvidia,tegra132-xusb-padctl", "nvidia,tegra124-xusb-padctl"
- - Tegra210: "nvidia,tegra210-xusb-padctl"
- - Tegra186: "nvidia,tegra186-xusb-padctl"
-- reg: Physical base address and length of the controller's registers.
-- resets: Must contain an entry for each entry in reset-names.
-- reset-names: Must include the following entries:
- - "padctl"
-
-For Tegra124:
-- avdd-pll-utmip-supply: UTMI PLL power supply. Must supply 1.8 V.
-- avdd-pll-erefe-supply: PLLE reference PLL power supply. Must supply 1.05 V.
-- avdd-pex-pll-supply: PCIe/USB3 PLL power supply. Must supply 1.05 V.
-- hvdd-pex-pll-e-supply: High-voltage PLLE power supply. Must supply 3.3 V.
-
-For Tegra210:
-- avdd-pll-utmip-supply: UTMI PLL power supply. Must supply 1.8 V.
-- avdd-pll-uerefe-supply: PLLE reference PLL power supply. Must supply 1.05 V.
-- dvdd-pex-pll-supply: PCIe/USB3 PLL power supply. Must supply 1.05 V.
-- hvdd-pex-pll-e-supply: High-voltage PLLE power supply. Must supply 1.8 V.
-
-For Tegra186:
-- avdd-pll-erefeut-supply: UPHY brick and reference clock as well as UTMI PHY
- power supply. Must supply 1.8 V.
-- avdd-usb-supply: USB I/Os, VBUS, ID, REXT, D+/D- power supply. Must supply
- 3.3 V.
-- vclamp-usb-supply: Bias rail for USB pad. Must supply 1.8 V.
-- vddio-hsic-supply: HSIC PHY power supply. Must supply 1.2 V.
-
-
-Pad nodes:
-==========
-
-A required child node named "pads" contains a list of subnodes, one for each
-of the pads exposed by the XUSB pad controller. Each pad may need additional
-resources that can be referenced in its pad node.
-
-The "status" property is used to enable or disable the use of a pad. If set
-to "disabled", the pad will not be used on the given board. In order to use
-the pad and any of its lanes, this property must be set to "okay".
-
-For Tegra124 and Tegra132, the following pads exist: usb2, ulpi, hsic, pcie
-and sata. No extra resources are required for operation of these pads.
-
-For Tegra210, the following pads exist: usb2, hsic, pcie and sata. Below is
-a description of the properties of each pad.
-
-UTMI pad:
----------
-
-Required properties:
-- clocks: Must contain an entry for each entry in clock-names.
-- clock-names: Must contain the following entries:
- - "trk": phandle and specifier referring to the USB2 tracking clock
-
-HSIC pad:
----------
-
-Required properties:
-- clocks: Must contain an entry for each entry in clock-names.
-- clock-names: Must contain the following entries:
- - "trk": phandle and specifier referring to the HSIC tracking clock
-
-PCIe pad:
----------
-
-Required properties:
-- clocks: Must contain an entry for each entry in clock-names.
-- clock-names: Must contain the following entries:
- - "pll": phandle and specifier referring to the PLLE
-- resets: Must contain an entry for each entry in reset-names.
-- reset-names: Must contain the following entries:
- - "phy": reset for the PCIe UPHY block
-
-SATA pad:
----------
-
-Required properties:
-- resets: Must contain an entry for each entry in reset-names.
-- reset-names: Must contain the following entries:
- - "phy": reset for the SATA UPHY block
-
-
-PHY nodes:
-==========
-
-Each pad node has a child named "lanes" that contains one or more children of
-its own, each representing one of the lanes controlled by the pad.
-
-Required properties:
---------------------
-- status: Defines the operation status of the PHY. Valid values are:
- - "disabled": the PHY is disabled
- - "okay": the PHY is enabled
-- #phy-cells: Should be 0. Since each lane represents a single PHY, there is
- no need for an additional specifier.
-- nvidia,function: The output function of the PHY. See below for a list of
- valid functions per SoC generation.
-
-For Tegra124 and Tegra132, the list of valid PHY nodes is given below:
-- usb2: usb2-0, usb2-1, usb2-2
- - functions: "snps", "xusb", "uart"
-- ulpi: ulpi-0
- - functions: "snps", "xusb"
-- hsic: hsic-0, hsic-1
- - functions: "snps", "xusb"
-- pcie: pcie-0, pcie-1, pcie-2, pcie-3, pcie-4
- - functions: "pcie", "usb3-ss"
-- sata: sata-0
- - functions: "usb3-ss", "sata"
-
-For Tegra210, the list of valid PHY nodes is given below:
-- usb2: usb2-0, usb2-1, usb2-2, usb2-3
- - functions: "snps", "xusb", "uart"
-- hsic: hsic-0, hsic-1
- - functions: "snps", "xusb"
-- pcie: pcie-0, pcie-1, pcie-2, pcie-3, pcie-4, pcie-5, pcie-6
- - functions: "pcie-x1", "usb3-ss", "pcie-x4"
-- sata: sata-0
- - functions: "usb3-ss", "sata"
-
-
-Port nodes:
-===========
-
-A required child node named "ports" contains a list of all the ports exposed
-by the XUSB pad controller. Per-port configuration is only required for USB.
-
-USB2 ports:
------------
-
-Required properties:
-- status: Defines the operation status of the port. Valid values are:
- - "disabled": the port is disabled
- - "okay": the port is enabled
-- mode: A string that determines the mode in which to run the port. Valid
- values are:
- - "host": for USB host mode
- - "device": for USB device mode
- - "otg": for USB OTG mode
-
-Optional properties:
-- nvidia,internal: A boolean property whose presence determines that a port
- is internal. In the absence of this property the port is considered to be
- external.
-- vbus-supply: phandle to a regulator supplying the VBUS voltage.
-
-ULPI ports:
------------
-
-Optional properties:
-- status: Defines the operation status of the port. Valid values are:
- - "disabled": the port is disabled
- - "okay": the port is enabled
-- nvidia,internal: A boolean property whose presence determines that a port
- is internal. In the absence of this property the port is considered to be
- external.
-- vbus-supply: phandle to a regulator supplying the VBUS voltage.
-
-HSIC ports:
------------
-
-Required properties:
-- status: Defines the operation status of the port. Valid values are:
- - "disabled": the port is disabled
- - "okay": the port is enabled
-
-Optional properties:
-- vbus-supply: phandle to a regulator supplying the VBUS voltage.
-
-Super-speed USB ports:
-----------------------
-
-Required properties:
-- status: Defines the operation status of the port. Valid values are:
- - "disabled": the port is disabled
- - "okay": the port is enabled
-- nvidia,usb2-companion: A single cell that specifies the physical port number
- to map this super-speed USB port to. The range of valid port numbers varies
- with the SoC generation:
- - 0-2: for Tegra124 and Tegra132
- - 0-3: for Tegra210
-
-Optional properties:
-- nvidia,internal: A boolean property whose presence determines that a port
- is internal. In the absence of this property the port is considered to be
- external.
-
-For Tegra124 and Tegra132, the XUSB pad controller exposes the following
-ports:
-- 3x USB2: usb2-0, usb2-1, usb2-2
-- 1x ULPI: ulpi-0
-- 2x HSIC: hsic-0, hsic-1
-- 2x super-speed USB: usb3-0, usb3-1
-
-For Tegra210, the XUSB pad controller exposes the following ports:
-- 4x USB2: usb2-0, usb2-1, usb2-2, usb2-3
-- 2x HSIC: hsic-0, hsic-1
-- 4x super-speed USB: usb3-0, usb3-1, usb3-2, usb3-3
-
-
-Examples:
-=========
-
-Tegra124 and Tegra132:
-----------------------
-
-SoC include:
-
- padctl@7009f000 {
- /* for Tegra124 */
- compatible = "nvidia,tegra124-xusb-padctl";
- /* for Tegra132 */
- compatible = "nvidia,tegra132-xusb-padctl",
- "nvidia,tegra124-xusb-padctl";
- reg = <0x0 0x7009f000 0x0 0x1000>;
- resets = <&tegra_car 142>;
- reset-names = "padctl";
-
- pads {
- usb2 {
- status = "disabled";
-
- lanes {
- usb2-0 {
- status = "disabled";
- #phy-cells = <0>;
- };
-
- usb2-1 {
- status = "disabled";
- #phy-cells = <0>;
- };
-
- usb2-2 {
- status = "disabled";
- #phy-cells = <0>;
- };
- };
- };
-
- ulpi {
- status = "disabled";
-
- lanes {
- ulpi-0 {
- status = "disabled";
- #phy-cells = <0>;
- };
- };
- };
-
- hsic {
- status = "disabled";
-
- lanes {
- hsic-0 {
- status = "disabled";
- #phy-cells = <0>;
- };
-
- hsic-1 {
- status = "disabled";
- #phy-cells = <0>;
- };
- };
- };
-
- pcie {
- status = "disabled";
-
- lanes {
- pcie-0 {
- status = "disabled";
- #phy-cells = <0>;
- };
-
- pcie-1 {
- status = "disabled";
- #phy-cells = <0>;
- };
-
- pcie-2 {
- status = "disabled";
- #phy-cells = <0>;
- };
-
- pcie-3 {
- status = "disabled";
- #phy-cells = <0>;
- };
-
- pcie-4 {
- status = "disabled";
- #phy-cells = <0>;
- };
- };
- };
-
- sata {
- status = "disabled";
-
- lanes {
- sata-0 {
- status = "disabled";
- #phy-cells = <0>;
- };
- };
- };
- };
-
- ports {
- usb2-0 {
- status = "disabled";
- };
-
- usb2-1 {
- status = "disabled";
- };
-
- usb2-2 {
- status = "disabled";
- };
-
- ulpi-0 {
- status = "disabled";
- };
-
- hsic-0 {
- status = "disabled";
- };
-
- hsic-1 {
- status = "disabled";
- };
-
- usb3-0 {
- status = "disabled";
- };
-
- usb3-1 {
- status = "disabled";
- };
- };
- };
-
-Board file:
-
- padctl@7009f000 {
- status = "okay";
-
- pads {
- usb2 {
- status = "okay";
-
- lanes {
- usb2-0 {
- nvidia,function = "xusb";
- status = "okay";
- };
-
- usb2-1 {
- nvidia,function = "xusb";
- status = "okay";
- };
-
- usb2-2 {
- nvidia,function = "xusb";
- status = "okay";
- };
- };
- };
-
- pcie {
- status = "okay";
-
- lanes {
- pcie-0 {
- nvidia,function = "usb3-ss";
- status = "okay";
- };
-
- pcie-2 {
- nvidia,function = "pcie";
- status = "okay";
- };
-
- pcie-4 {
- nvidia,function = "pcie";
- status = "okay";
- };
- };
- };
-
- sata {
- status = "okay";
-
- lanes {
- sata-0 {
- nvidia,function = "sata";
- status = "okay";
- };
- };
- };
- };
-
- ports {
- /* Micro A/B */
- usb2-0 {
- status = "okay";
- mode = "otg";
- };
-
- /* Mini PCIe */
- usb2-1 {
- status = "okay";
- mode = "host";
- };
-
- /* USB3 */
- usb2-2 {
- status = "okay";
- mode = "host";
-
- vbus-supply = <&vdd_usb3_vbus>;
- };
-
- usb3-0 {
- nvidia,port = <2>;
- status = "okay";
- };
- };
- };
-
-Tegra210:
----------
-
-SoC include:
-
- padctl@7009f000 {
- compatible = "nvidia,tegra210-xusb-padctl";
- reg = <0x0 0x7009f000 0x0 0x1000>;
- resets = <&tegra_car 142>;
- reset-names = "padctl";
-
- status = "disabled";
-
- pads {
- usb2 {
- clocks = <&tegra_car TEGRA210_CLK_USB2_TRK>;
- clock-names = "trk";
- status = "disabled";
-
- lanes {
- usb2-0 {
- status = "disabled";
- #phy-cells = <0>;
- };
-
- usb2-1 {
- status = "disabled";
- #phy-cells = <0>;
- };
-
- usb2-2 {
- status = "disabled";
- #phy-cells = <0>;
- };
-
- usb2-3 {
- status = "disabled";
- #phy-cells = <0>;
- };
- };
- };
-
- hsic {
- clocks = <&tegra_car TEGRA210_CLK_HSIC_TRK>;
- clock-names = "trk";
- status = "disabled";
-
- lanes {
- hsic-0 {
- status = "disabled";
- #phy-cells = <0>;
- };
-
- hsic-1 {
- status = "disabled";
- #phy-cells = <0>;
- };
- };
- };
-
- pcie {
- clocks = <&tegra_car TEGRA210_CLK_PLL_E>;
- clock-names = "pll";
- resets = <&tegra_car 205>;
- reset-names = "phy";
- status = "disabled";
-
- lanes {
- pcie-0 {
- status = "disabled";
- #phy-cells = <0>;
- };
-
- pcie-1 {
- status = "disabled";
- #phy-cells = <0>;
- };
-
- pcie-2 {
- status = "disabled";
- #phy-cells = <0>;
- };
-
- pcie-3 {
- status = "disabled";
- #phy-cells = <0>;
- };
-
- pcie-4 {
- status = "disabled";
- #phy-cells = <0>;
- };
-
- pcie-5 {
- status = "disabled";
- #phy-cells = <0>;
- };
-
- pcie-6 {
- status = "disabled";
- #phy-cells = <0>;
- };
- };
- };
-
- sata {
- clocks = <&tegra_car TEGRA210_CLK_PLL_E>;
- clock-names = "pll";
- resets = <&tegra_car 204>;
- reset-names = "phy";
- status = "disabled";
-
- lanes {
- sata-0 {
- status = "disabled";
- #phy-cells = <0>;
- };
- };
- };
- };
-
- ports {
- usb2-0 {
- status = "disabled";
- };
-
- usb2-1 {
- status = "disabled";
- };
-
- usb2-2 {
- status = "disabled";
- };
-
- usb2-3 {
- status = "disabled";
- };
-
- hsic-0 {
- status = "disabled";
- };
-
- hsic-1 {
- status = "disabled";
- };
-
- usb3-0 {
- status = "disabled";
- };
-
- usb3-1 {
- status = "disabled";
- };
-
- usb3-2 {
- status = "disabled";
- };
-
- usb3-3 {
- status = "disabled";
- };
- };
- };
-
-Board file:
-
- padctl@7009f000 {
- status = "okay";
-
- pads {
- usb2 {
- status = "okay";
-
- lanes {
- usb2-0 {
- nvidia,function = "xusb";
- status = "okay";
- };
-
- usb2-1 {
- nvidia,function = "xusb";
- status = "okay";
- };
-
- usb2-2 {
- nvidia,function = "xusb";
- status = "okay";
- };
-
- usb2-3 {
- nvidia,function = "xusb";
- status = "okay";
- };
- };
- };
-
- pcie {
- status = "okay";
-
- lanes {
- pcie-0 {
- nvidia,function = "pcie-x1";
- status = "okay";
- };
-
- pcie-1 {
- nvidia,function = "pcie-x4";
- status = "okay";
- };
-
- pcie-2 {
- nvidia,function = "pcie-x4";
- status = "okay";
- };
-
- pcie-3 {
- nvidia,function = "pcie-x4";
- status = "okay";
- };
-
- pcie-4 {
- nvidia,function = "pcie-x4";
- status = "okay";
- };
-
- pcie-5 {
- nvidia,function = "usb3-ss";
- status = "okay";
- };
-
- pcie-6 {
- nvidia,function = "usb3-ss";
- status = "okay";
- };
- };
- };
-
- sata {
- status = "okay";
-
- lanes {
- sata-0 {
- nvidia,function = "sata";
- status = "okay";
- };
- };
- };
- };
-
- ports {
- usb2-0 {
- status = "okay";
- mode = "otg";
- };
-
- usb2-1 {
- status = "okay";
- vbus-supply = <&vdd_5v0_rtl>;
- mode = "host";
- };
-
- usb2-2 {
- status = "okay";
- vbus-supply = <&vdd_usb_vbus>;
- mode = "host";
- };
-
- usb2-3 {
- status = "okay";
- mode = "host";
- };
-
- usb3-0 {
- status = "okay";
- nvidia,lanes = "pcie-6";
- nvidia,port = <1>;
- };
-
- usb3-1 {
- status = "okay";
- nvidia,lanes = "pcie-5";
- nvidia,port = <2>;
- };
- };
- };
generated by cgit v1.2.3 (git 2.39.1) at 2024-04-26 05:31:09 +0000