diff options
Diffstat (limited to 'dts/Bindings/phy/nvidia,tegra186-xusb-padctl.yaml')
| -rw-r--r-- | dts/Bindings/phy/nvidia,tegra186-xusb-padctl.yaml | 544 |
1 files changed, 544 insertions, 0 deletions
diff --git a/dts/Bindings/phy/nvidia,tegra186-xusb-padctl.yaml b/dts/Bindings/phy/nvidia,tegra186-xusb-padctl.yaml new file mode 100644 index 0000000000..8b1d5a8529 --- /dev/null +++ b/dts/Bindings/phy/nvidia,tegra186-xusb-padctl.yaml @@ -0,0 +1,544 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/phy/nvidia,tegra186-xusb-padctl.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: NVIDIA Tegra186 XUSB pad controller + +maintainers: + - Thierry Reding <thierry.reding@gmail.com> + - Jon Hunter <jonathanh@nvidia.com> + +description: | + The Tegra XUSB pad controller manages a set of I/O lanes (with differential + signals) which connect directly to pins/pads on the SoC package. Each lane + is controlled by a HW block referred to as a "pad" in the Tegra hardware + documentation. Each such "pad" may control either one or multiple lanes, + and thus contains any logic common to all its lanes. Each lane can be + separately configured and powered up. + + Some of the lanes are high-speed lanes, which can be used for PCIe, SATA or + super-speed USB. Other lanes are for various types of low-speed, full-speed + or high-speed USB (such as UTMI, ULPI and HSIC). The XUSB pad controller + contains a software-configurable mux that sits between the I/O controller + ports (e.g. PCIe) and the lanes. + + In addition to per-lane configuration, USB 3.0 ports may require additional + settings on a per-board basis. + + Pads will be represented as children of the top-level XUSB pad controller + device tree node. Each lane exposed by the pad will be represented by its + own subnode and can be referenced by users of the lane using the standard + PHY bindings, as described by the phy-bindings.txt file in this directory. + + The Tegra hardware documentation refers to the connection between the XUSB + pad controller and the XUSB controller as "ports". This is confusing since + "port" is typically used to denote the physical USB receptacle. The device + tree binding in this document uses the term "port" to refer to the logical + abstraction of the signals that are routed to a USB receptacle (i.e. a PHY + for the USB signal, the VBUS power supply, the USB 2.0 companion port for + USB 3.0 receptacles, ...). + +properties: + compatible: + const: nvidia,tegra186-xusb-padctl + + reg: + items: + - description: pad controller registers + - description: AO registers + + interrupts: + items: + - description: XUSB pad controller interrupt + + reg-names: + items: + - const: padctl + - const: ao + + resets: + items: + - description: pad controller reset + + reset-names: + items: + - const: padctl + + avdd-pll-erefeut-supply: + description: UPHY brick and reference clock as well as UTMI PHY + power supply. Must supply 1.8 V. + + avdd-usb-supply: + description: USB I/Os, VBUS, ID, REXT, D+/D- power supply. Must + supply 3.3 V. + + vclamp-usb-supply: + description: Bias rail for USB pad. Must supply 1.8 V. + + vddio-hsic-supply: + description: HSIC PHY power supply. Must supply 1.2 V. + + pads: + description: A required child node named "pads" contains a list of + subnodes, one for each of the pads exposed by the XUSB pad controller. + Each pad may need additional resources that can be referenced in its + pad node. + + The "status" property is used to enable or disable the use of a pad. + If set to "disabled", the pad will not be used on the given board. In + order to use the pad and any of its lanes, this property must be set + to "okay" or be absent. + type: object + additionalProperties: false + properties: + usb2: + type: object + additionalProperties: false + properties: + clocks: + items: + - description: USB2 tracking clock + + clock-names: + items: + - const: trk + + lanes: + type: object + additionalProperties: false + properties: + usb2-0: + type: object + additionalProperties: false + properties: + "#phy-cells": + const: 0 + + nvidia,function: + description: Function selection for this lane. + $ref: /schemas/types.yaml#/definitions/string + enum: [ xusb ] + + usb2-1: + type: object + additionalProperties: false + properties: + "#phy-cells": + const: 0 + + nvidia,function: + description: Function selection for this lane. + $ref: /schemas/types.yaml#/definitions/string + enum: [ xusb ] + + usb2-2: + type: object + additionalProperties: false + properties: + "#phy-cells": + const: 0 + + nvidia,function: + description: Function selection for this lane. + $ref: /schemas/types.yaml#/definitions/string + enum: [ xusb ] + + hsic: + type: object + additionalProperties: false + properties: + clocks: + items: + - description: HSIC tracking clock + + clock-names: + items: + - const: trk + + lanes: + type: object + additionalProperties: false + properties: + hsic-0: + type: object + additionalProperties: false + properties: + "#phy-cells": + const: 0 + + nvidia,function: + description: Function selection for this lane. + $ref: /schemas/types.yaml#/definitions/string + enum: [ xusb ] + + usb3: + type: object + additionalProperties: false + properties: + lanes: + type: object + additionalProperties: false + properties: + usb3-0: + type: object + additionalProperties: false + properties: + "#phy-cells": + const: 0 + + nvidia,function: + description: Function selection for this lane. + $ref: /schemas/types.yaml#/definitions/string + enum: [ xusb ] + + usb3-1: + type: object + additionalProperties: false + properties: + "#phy-cells": + const: 0 + + nvidia,function: + description: Function selection for this lane. + $ref: /schemas/types.yaml#/definitions/string + enum: [ xusb ] + + usb3-2: + type: object + additionalProperties: false + properties: + "#phy-cells": + const: 0 + + nvidia,function: + description: Function selection for this lane. + $ref: /schemas/types.yaml#/definitions/string + enum: [ xusb ] + + ports: + description: A required child node named "ports" contains a list of + subnodes, one for each of the ports exposed by the XUSB pad controller. + Each port may need additional resources that can be referenced in its + port node. + + The "status" property is used to enable or disable the use of a port. + If set to "disabled", the port will not be used on the given board. In + order to use the port, this property must be set to "okay". + type: object + additionalProperties: false + properties: + usb2-0: + type: object + additionalProperties: false + properties: + # no need to further describe this because the connector will + # match on gpio-usb-b-connector or usb-b-connector and cause + # that binding to be selected for the subnode + connector: + type: object + + mode: + description: A string that determines the mode in which to + run the port. + $ref: /schemas/types.yaml#/definitions/string + enum: [ host, peripheral, otg ] + + nvidia,internal: + description: A boolean property whose presence determines + that a port is internal. In the absence of this property + the port is considered to be external. + $ref: /schemas/types.yaml#/definitions/flag + + usb-role-switch: + description: | + A boolean property whole presence indicates that the port + supports OTG or peripheral mode. If present, the port + supports switching between USB host and peripheral roles. + A connector must be added as a subnode in that case. + + See ../connector/usb-connector.yaml. + + vbus-supply: + description: A phandle to the regulator supplying the VBUS + voltage. + + dependencies: + usb-role-switch: [ connector ] + + usb2-1: + type: object + additionalProperties: false + properties: + # no need to further describe this because the connector will + # match on gpio-usb-b-connector or usb-b-connector and cause + # that binding to be selected for the subnode + connector: + type: object + + mode: + description: A string that determines the mode in which to + run the port. + $ref: /schemas/types.yaml#/definitions/string + enum: [ host, peripheral, otg ] + + nvidia,internal: + description: A boolean property whose presence determines + that a port is internal. In the absence of this property + the port is considered to be external. + $ref: /schemas/types.yaml#/definitions/flag + + usb-role-switch: + description: | + A boolean property whole presence indicates that the port + supports OTG or peripheral mode. If present, the port + supports switching between USB host and peripheral roles. + A connector must be added as a subnode in that case. + + See ../connector/usb-connector.yaml. + + vbus-supply: + description: A phandle to the regulator supplying the VBUS + voltage. + + dependencies: + usb-role-switch: [ connector ] + + usb2-2: + type: object + additionalProperties: false + properties: + # no need to further describe this because the connector will + # match on gpio-usb-b-connector or usb-b-connector and cause + # that binding to be selected for the subnode + connector: + type: object + + mode: + description: A string that determines the mode in which to + run the port. + $ref: /schemas/types.yaml#/definitions/string + enum: [ host, peripheral, otg ] + + nvidia,internal: + description: A boolean property whose presence determines + that a port is internal. In the absence of this property + the port is considered to be external. + $ref: /schemas/types.yaml#/definitions/flag + + usb-role-switch: + description: | + A boolean property whole presence indicates that the port + supports OTG or peripheral mode. If present, the port + supports switching between USB host and peripheral roles. + A connector must be added as a subnode in that case. + + See ../connector/usb-connector.yaml. + + vbus-supply: + description: A phandle to the regulator supplying the VBUS + voltage. + + dependencies: + usb-role-switch: [ connector ] + + hsic-0: + type: object + additionalProperties: false + + usb3-0: + type: object + additionalProperties: false + properties: + nvidia,internal: + description: A boolean property whose presence determines + that a port is internal. In the absence of this property + the port is considered to be external. + $ref: /schemas/types.yaml#/definitions/flag + + nvidia,usb2-companion: + description: A single cell that specifies the physical port + number to map this super-speed USB port to. The range of + valid port numbers varies with the SoC generation. + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [ 0, 1, 2, 3 ] + + vbus-supply: + description: A phandle to the regulator supplying the VBUS + voltage. + + usb3-1: + type: object + additionalProperties: false + properties: + nvidia,internal: + description: A boolean property whose presence determines + that a port is internal. In the absence of this property + the port is considered to be external. + $ref: /schemas/types.yaml#/definitions/flag + + nvidia,usb2-companion: + description: A single cell that specifies the physical port + number to map this super-speed USB port to. The range of + valid port numbers varies with the SoC generation. + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [ 0, 1, 2, 3 ] + + vbus-supply: + description: A phandle to the regulator supplying the VBUS + voltage. + + usb3-2: + type: object + additionalProperties: false + properties: + nvidia,internal: + description: A boolean property whose presence determines + that a port is internal. In the absence of this property + the port is considered to be external. + $ref: /schemas/types.yaml#/definitions/flag + + nvidia,usb2-companion: + description: A single cell that specifies the physical port + number to map this super-speed USB port to. The range of + valid port numbers varies with the SoC generation. + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [ 0, 1, 2, 3 ] + + vbus-supply: + description: A phandle to the regulator supplying the VBUS + voltage. + +additionalProperties: false + +required: + - compatible + - reg + - resets + - reset-names + - avdd-pll-erefeut-supply + - avdd-usb-supply + - vclamp-usb-supply + - vddio-hsic-supply + +examples: + - | + #include <dt-bindings/clock/tegra186-clock.h> + #include <dt-bindings/gpio/tegra186-gpio.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/reset/tegra186-reset.h> + + padctl@3520000 { + compatible = "nvidia,tegra186-xusb-padctl"; + reg = <0x03520000 0x1000>, + <0x03540000 0x1000>; + reg-names = "padctl", "ao"; + interrupts = <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>; + + resets = <&bpmp TEGRA186_RESET_XUSB_PADCTL>; + reset-names = "padctl"; + + avdd-pll-erefeut-supply = <&vdd_1v8_pll>; + avdd-usb-supply = <&vdd_3v3_sys>; + vclamp-usb-supply = <&vdd_1v8>; + vddio-hsic-supply = <&gnd>; + + pads { + usb2 { + clocks = <&bpmp TEGRA186_CLK_USB2_TRK>; + clock-names = "trk"; + + lanes { + usb2-0 { + nvidia,function = "xusb"; + #phy-cells = <0>; + }; + + usb2-1 { + nvidia,function = "xusb"; + #phy-cells = <0>; + }; + + usb2-2 { + nvidia,function = "xusb"; + #phy-cells = <0>; + }; + }; + }; + + hsic { + clocks = <&bpmp TEGRA186_CLK_HSIC_TRK>; + clock-names = "trk"; + status = "disabled"; + + lanes { + hsic-0 { + status = "disabled"; + #phy-cells = <0>; + }; + }; + }; + + usb3 { + lanes { + usb3-0 { + nvidia,function = "xusb"; + #phy-cells = <0>; + }; + + usb3-1 { + nvidia,function = "xusb"; + #phy-cells = <0>; + }; + + usb3-2 { + nvidia,function = "xusb"; + #phy-cells = <0>; + }; + }; + }; + }; + + ports { + usb2-0 { + mode = "otg"; + vbus-supply = <&vdd_usb0>; + usb-role-switch; + + connector { + compatible = "gpio-usb-b-connector", + "usb-b-connector"; + label = "micro-USB"; + type = "micro"; + vbus-gpios = <&gpio TEGRA186_MAIN_GPIO(X, 7) GPIO_ACTIVE_LOW>; + id-gpios = <&pmic 0 GPIO_ACTIVE_HIGH>; + }; + }; + + usb2-1 { + vbus-supply = <&vdd_usb1>; + mode = "host"; + }; + + usb2-2 { + status = "disabled"; + }; + + hsic-0 { + status = "disabled"; + }; + + usb3-0 { + nvidia,usb2-companion = <1>; + }; + + usb3-1 { + status = "disabled"; + }; + + usb3-2 { + status = "disabled"; + }; + }; + }; |