diff options
Diffstat (limited to 'dts/Bindings/phy/uniphier-pcie-phy.txt')
-rw-r--r-- | dts/Bindings/phy/uniphier-pcie-phy.txt | 31 |
1 files changed, 0 insertions, 31 deletions
diff --git a/dts/Bindings/phy/uniphier-pcie-phy.txt b/dts/Bindings/phy/uniphier-pcie-phy.txt deleted file mode 100644 index 1889d3b89d..0000000000 --- a/dts/Bindings/phy/uniphier-pcie-phy.txt +++ /dev/null @@ -1,31 +0,0 @@ -Socionext UniPhier PCIe PHY bindings - -This describes the devicetree bindings for PHY interface built into -PCIe controller implemented on Socionext UniPhier SoCs. - -Required properties: -- compatible: Should contain one of the following: - "socionext,uniphier-ld20-pcie-phy" - for LD20 PHY - "socionext,uniphier-pxs3-pcie-phy" - for PXs3 PHY -- reg: Specifies offset and length of the register set for the device. -- #phy-cells: Must be zero. -- clocks: A phandle to the clock gate for PCIe glue layer including - this phy. -- resets: A phandle to the reset line for PCIe glue layer including - this phy. - -Optional properties: -- socionext,syscon: A phandle to system control to set configurations - for phy. - -Refer to phy/phy-bindings.txt for the generic PHY binding properties. - -Example: - pcie_phy: phy@66038000 { - compatible = "socionext,uniphier-ld20-pcie-phy"; - reg = <0x66038000 0x4000>; - #phy-cells = <0>; - clocks = <&sys_clk 24>; - resets = <&sys_rst 24>; - socionext,syscon = <&soc_glue>; - }; |