diff options
Diffstat (limited to 'dts/Bindings/phy')
106 files changed, 5375 insertions, 2552 deletions
diff --git a/dts/Bindings/phy/allwinner,sun50i-h6-usb3-phy.yaml b/dts/Bindings/phy/allwinner,sun50i-h6-usb3-phy.yaml index c03b83103e..cf4eed2305 100644 --- a/dts/Bindings/phy/allwinner,sun50i-h6-usb3-phy.yaml +++ b/dts/Bindings/phy/allwinner,sun50i-h6-usb3-phy.yaml @@ -2,8 +2,8 @@ # Copyright 2019 Ondrej Jirman <megous@megous.com> %YAML 1.2 --- -$id: "http://devicetree.org/schemas/phy/allwinner,sun50i-h6-usb3-phy.yaml#" -$schema: "http://devicetree.org/meta-schemas/core.yaml#" +$id: http://devicetree.org/schemas/phy/allwinner,sun50i-h6-usb3-phy.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# title: Allwinner H6 USB3 PHY diff --git a/dts/Bindings/phy/allwinner,sun6i-a31-mipi-dphy.yaml b/dts/Bindings/phy/allwinner,sun6i-a31-mipi-dphy.yaml index fe9702e7bd..6a4fd49299 100644 --- a/dts/Bindings/phy/allwinner,sun6i-a31-mipi-dphy.yaml +++ b/dts/Bindings/phy/allwinner,sun6i-a31-mipi-dphy.yaml @@ -45,7 +45,7 @@ properties: maxItems: 1 allwinner,direction: - $ref: '/schemas/types.yaml#/definitions/string' + $ref: /schemas/types.yaml#/definitions/string description: | Direction of the D-PHY: - "rx" for receiving (e.g. when used with MIPI CSI-2); diff --git a/dts/Bindings/phy/allwinner,suniv-f1c100s-usb-phy.yaml b/dts/Bindings/phy/allwinner,suniv-f1c100s-usb-phy.yaml new file mode 100644 index 0000000000..9488394992 --- /dev/null +++ b/dts/Bindings/phy/allwinner,suniv-f1c100s-usb-phy.yaml @@ -0,0 +1,83 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/phy/allwinner,suniv-f1c100s-usb-phy.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Allwinner F1C100s USB PHY + +maintainers: + - Chen-Yu Tsai <wens@csie.org> + - Maxime Ripard <mripard@kernel.org> + +properties: + "#phy-cells": + const: 1 + + compatible: + const: allwinner,suniv-f1c100s-usb-phy + + reg: + maxItems: 1 + description: PHY Control registers + + reg-names: + const: phy_ctrl + + clocks: + maxItems: 1 + description: USB OTG PHY bus clock + + clock-names: + const: usb0_phy + + resets: + maxItems: 1 + description: USB OTG reset + + reset-names: + const: usb0_reset + + usb0_id_det-gpios: + maxItems: 1 + description: GPIO to the USB OTG ID pin + + usb0_vbus_det-gpios: + maxItems: 1 + description: GPIO to the USB OTG VBUS detect pin + + usb0_vbus_power-supply: + description: Power supply to detect the USB OTG VBUS + + usb0_vbus-supply: + description: Regulator controlling USB OTG VBUS + +required: + - "#phy-cells" + - compatible + - clocks + - clock-names + - reg + - reg-names + - resets + - reset-names + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/clock/suniv-ccu-f1c100s.h> + #include <dt-bindings/reset/suniv-ccu-f1c100s.h> + + phy@1c13400 { + compatible = "allwinner,suniv-f1c100s-usb-phy"; + reg = <0x01c13400 0x10>; + reg-names = "phy_ctrl"; + clocks = <&ccu CLK_USB_PHY0>; + clock-names = "usb0_phy"; + resets = <&ccu RST_USB_PHY0>; + reset-names = "usb0_reset"; + #phy-cells = <1>; + usb0_id_det-gpios = <&pio 4 2 GPIO_ACTIVE_HIGH>; + }; diff --git a/dts/Bindings/phy/amlogic,axg-mipi-dphy.yaml b/dts/Bindings/phy/amlogic,axg-mipi-dphy.yaml index 5eddaed3d8..64795f170f 100644 --- a/dts/Bindings/phy/amlogic,axg-mipi-dphy.yaml +++ b/dts/Bindings/phy/amlogic,axg-mipi-dphy.yaml @@ -2,8 +2,8 @@ # Copyright 2020 BayLibre, SAS %YAML 1.2 --- -$id: "http://devicetree.org/schemas/phy/amlogic,axg-mipi-dphy.yaml#" -$schema: "http://devicetree.org/meta-schemas/core.yaml#" +$id: http://devicetree.org/schemas/phy/amlogic,axg-mipi-dphy.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# title: Amlogic AXG MIPI D-PHY diff --git a/dts/Bindings/phy/amlogic,g12a-mipi-dphy-analog.yaml b/dts/Bindings/phy/amlogic,g12a-mipi-dphy-analog.yaml index 7aa0c05d6c..81c2654b7e 100644 --- a/dts/Bindings/phy/amlogic,g12a-mipi-dphy-analog.yaml +++ b/dts/Bindings/phy/amlogic,g12a-mipi-dphy-analog.yaml @@ -1,8 +1,8 @@ # SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) %YAML 1.2 --- -$id: "http://devicetree.org/schemas/phy/amlogic,g12a-mipi-dphy-analog.yaml#" -$schema: "http://devicetree.org/meta-schemas/core.yaml#" +$id: http://devicetree.org/schemas/phy/amlogic,g12a-mipi-dphy-analog.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# title: Amlogic G12A MIPI analog PHY @@ -16,20 +16,8 @@ properties: "#phy-cells": const: 0 - reg: - maxItems: 1 - required: - compatible - - reg - "#phy-cells" additionalProperties: false - -examples: - - | - phy@0 { - compatible = "amlogic,g12a-mipi-dphy-analog"; - reg = <0x0 0xc>; - #phy-cells = <0>; - }; diff --git a/dts/Bindings/phy/amlogic,meson-g12a-usb2-phy.yaml b/dts/Bindings/phy/amlogic,g12a-usb2-phy.yaml index f3a5fbabbb..0031fb6a4e 100644 --- a/dts/Bindings/phy/amlogic,meson-g12a-usb2-phy.yaml +++ b/dts/Bindings/phy/amlogic,g12a-usb2-phy.yaml @@ -2,8 +2,8 @@ # Copyright 2019 BayLibre, SAS %YAML 1.2 --- -$id: "http://devicetree.org/schemas/phy/amlogic,meson-g12a-usb2-phy.yaml#" -$schema: "http://devicetree.org/meta-schemas/core.yaml#" +$id: http://devicetree.org/schemas/phy/amlogic,g12a-usb2-phy.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# title: Amlogic G12A USB2 PHY @@ -13,8 +13,8 @@ maintainers: properties: compatible: enum: - - amlogic,meson-g12a-usb2-phy - - amlogic,meson-a1-usb2-phy + - amlogic,g12a-usb2-phy + - amlogic,a1-usb2-phy reg: maxItems: 1 @@ -68,7 +68,7 @@ additionalProperties: false examples: - | phy@36000 { - compatible = "amlogic,meson-g12a-usb2-phy"; + compatible = "amlogic,g12a-usb2-phy"; reg = <0x36000 0x2000>; clocks = <&xtal>; clock-names = "xtal"; diff --git a/dts/Bindings/phy/amlogic,meson-g12a-usb3-pcie-phy.yaml b/dts/Bindings/phy/amlogic,g12a-usb3-pcie-phy.yaml index 868b4e6fde..1a5a12adb7 100644 --- a/dts/Bindings/phy/amlogic,meson-g12a-usb3-pcie-phy.yaml +++ b/dts/Bindings/phy/amlogic,g12a-usb3-pcie-phy.yaml @@ -2,8 +2,8 @@ # Copyright 2019 BayLibre, SAS %YAML 1.2 --- -$id: "http://devicetree.org/schemas/phy/amlogic,meson-g12a-usb3-pcie-phy.yaml#" -$schema: "http://devicetree.org/meta-schemas/core.yaml#" +$id: http://devicetree.org/schemas/phy/amlogic,g12a-usb3-pcie-phy.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# title: Amlogic G12A USB3 + PCIE Combo PHY @@ -13,7 +13,7 @@ maintainers: properties: compatible: enum: - - amlogic,meson-g12a-usb3-pcie-phy + - amlogic,g12a-usb3-pcie-phy reg: maxItems: 1 @@ -35,6 +35,11 @@ properties: "#phy-cells": const: 1 + phy-supply: + description: + Phandle to a regulator that provides power to the PHY. This + regulator will be managed during the PHY power on/off sequence. + required: - compatible - reg @@ -49,7 +54,7 @@ additionalProperties: false examples: - | phy@46000 { - compatible = "amlogic,meson-g12a-usb3-pcie-phy"; + compatible = "amlogic,g12a-usb3-pcie-phy"; reg = <0x46000 0x2000>; clocks = <&ref_clk>; clock-names = "ref_clk"; diff --git a/dts/Bindings/phy/amlogic,meson-axg-mipi-pcie-analog.yaml b/dts/Bindings/phy/amlogic,meson-axg-mipi-pcie-analog.yaml index a90fa1baad..70def36e56 100644 --- a/dts/Bindings/phy/amlogic,meson-axg-mipi-pcie-analog.yaml +++ b/dts/Bindings/phy/amlogic,meson-axg-mipi-pcie-analog.yaml @@ -1,24 +1,14 @@ # SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) %YAML 1.2 --- -$id: "http://devicetree.org/schemas/phy/amlogic,meson-axg-mipi-pcie-analog.yaml#" -$schema: "http://devicetree.org/meta-schemas/core.yaml#" +$id: http://devicetree.org/schemas/phy/amlogic,meson-axg-mipi-pcie-analog.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# title: Amlogic AXG shared MIPI/PCIE analog PHY maintainers: - Remi Pommarel <repk@triplefau.lt> -description: |+ - The Everything-Else Power Domains node should be the child of a syscon - node with the required property: - - - compatible: Should be the following: - "amlogic,meson-gx-hhi-sysctrl", "simple-mfd", "syscon" - - Refer to the bindings described in - Documentation/devicetree/bindings/mfd/syscon.yaml - properties: compatible: const: amlogic,axg-mipi-pcie-analog-phy @@ -31,10 +21,3 @@ required: - "#phy-cells" additionalProperties: false - -examples: - - | - mpphy: phy { - compatible = "amlogic,axg-mipi-pcie-analog-phy"; - #phy-cells = <0>; - }; diff --git a/dts/Bindings/phy/amlogic,meson-axg-pcie.yaml b/dts/Bindings/phy/amlogic,meson-axg-pcie.yaml index 45f3d72b1c..40fbf8ac32 100644 --- a/dts/Bindings/phy/amlogic,meson-axg-pcie.yaml +++ b/dts/Bindings/phy/amlogic,meson-axg-pcie.yaml @@ -1,8 +1,8 @@ # SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) %YAML 1.2 --- -$id: "http://devicetree.org/schemas/phy/amlogic,meson-axg-pcie.yaml#" -$schema: "http://devicetree.org/meta-schemas/core.yaml#" +$id: http://devicetree.org/schemas/phy/amlogic,meson-axg-pcie.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# title: Amlogic AXG PCIE PHY diff --git a/dts/Bindings/phy/amlogic,meson-gxl-usb2-phy.yaml b/dts/Bindings/phy/amlogic,meson-gxl-usb2-phy.yaml new file mode 100644 index 0000000000..c2f5c9d2fc --- /dev/null +++ b/dts/Bindings/phy/amlogic,meson-gxl-usb2-phy.yaml @@ -0,0 +1,56 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/phy/amlogic,meson-gxl-usb2-phy.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Amlogic Meson GXL USB2 PHY + +maintainers: + - Neil Armstrong <neil.armstrong@linaro.org> + +properties: + compatible: + const: amlogic,meson-gxl-usb2-phy + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + + clock-names: + items: + - const: phy + + resets: + maxItems: 1 + + reset-names: + items: + - const: phy + + "#phy-cells": + const: 0 + + phy-supply: true + +required: + - compatible + - reg + - "#phy-cells" + +additionalProperties: false + +examples: + - | + phy@78000 { + compatible = "amlogic,meson-gxl-usb2-phy"; + reg = <0x78000 0x20>; + clocks = <&xtal>; + clock-names = "phy"; + resets = <&phy_reset>; + reset-names = "phy"; + #phy-cells = <0>; + phy-supply = <&usb2_supply>; + }; diff --git a/dts/Bindings/phy/amlogic,meson8-hdmi-tx-phy.yaml b/dts/Bindings/phy/amlogic,meson8-hdmi-tx-phy.yaml index 1f085cdd1c..6f9fd1c953 100644 --- a/dts/Bindings/phy/amlogic,meson8-hdmi-tx-phy.yaml +++ b/dts/Bindings/phy/amlogic,meson8-hdmi-tx-phy.yaml @@ -1,8 +1,8 @@ # SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) %YAML 1.2 --- -$id: "http://devicetree.org/schemas/phy/amlogic,meson8-hdmi-tx-phy.yaml#" -$schema: "http://devicetree.org/meta-schemas/core.yaml#" +$id: http://devicetree.org/schemas/phy/amlogic,meson8-hdmi-tx-phy.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# title: Amlogic Meson8, Meson8b and Meson8m2 HDMI TX PHY diff --git a/dts/Bindings/phy/amlogic,meson8b-usb2-phy.yaml b/dts/Bindings/phy/amlogic,meson8b-usb2-phy.yaml index 03c4809dbe..df68bfe5f4 100644 --- a/dts/Bindings/phy/amlogic,meson8b-usb2-phy.yaml +++ b/dts/Bindings/phy/amlogic,meson8b-usb2-phy.yaml @@ -1,8 +1,8 @@ # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) %YAML 1.2 --- -$id: "http://devicetree.org/schemas/phy/amlogic,meson8b-usb2-phy.yaml#" -$schema: "http://devicetree.org/meta-schemas/core.yaml#" +$id: http://devicetree.org/schemas/phy/amlogic,meson8b-usb2-phy.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# title: Amlogic Meson8, Meson8b, Meson8m2 and GXBB USB2 PHY diff --git a/dts/Bindings/phy/brcm,bcm63xx-usbh-phy.yaml b/dts/Bindings/phy/brcm,bcm63xx-usbh-phy.yaml index 0f0bcde9eb..bd527f566c 100644 --- a/dts/Bindings/phy/brcm,bcm63xx-usbh-phy.yaml +++ b/dts/Bindings/phy/brcm,bcm63xx-usbh-phy.yaml @@ -1,8 +1,8 @@ # SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) %YAML 1.2 --- -$id: "http://devicetree.org/schemas/phy/brcm,bcm63xx-usbh-phy.yaml#" -$schema: "http://devicetree.org/meta-schemas/core.yaml#" +$id: http://devicetree.org/schemas/phy/brcm,bcm63xx-usbh-phy.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# title: BCM63xx USBH PHY diff --git a/dts/Bindings/phy/brcm,brcmstb-usb-phy.yaml b/dts/Bindings/phy/brcm,brcmstb-usb-phy.yaml index 43a4b88053..580fbe37b3 100644 --- a/dts/Bindings/phy/brcm,brcmstb-usb-phy.yaml +++ b/dts/Bindings/phy/brcm,brcmstb-usb-phy.yaml @@ -115,8 +115,8 @@ allOf: compatible: contains: enum: - - const: brcm,bcm4908-usb-phy - - const: brcm,brcmstb-usb-phy + - brcm,bcm4908-usb-phy + - brcm,brcmstb-usb-phy then: properties: reg: diff --git a/dts/Bindings/phy/brcm,kona-usb2-phy.txt b/dts/Bindings/phy/brcm,kona-usb2-phy.txt deleted file mode 100644 index 3dc8b3d2ff..0000000000 --- a/dts/Bindings/phy/brcm,kona-usb2-phy.txt +++ /dev/null @@ -1,15 +0,0 @@ -BROADCOM KONA USB2 PHY - -Required properties: - - compatible: brcm,kona-usb2-phy - - reg: offset and length of the PHY registers - - #phy-cells: must be 0 -Refer to phy/phy-bindings.txt for the generic PHY binding properties - -Example: - - usbphy: usb-phy@3f130000 { - compatible = "brcm,kona-usb2-phy"; - reg = <0x3f130000 0x28>; - #phy-cells = <0>; - }; diff --git a/dts/Bindings/phy/brcm,kona-usb2-phy.yaml b/dts/Bindings/phy/brcm,kona-usb2-phy.yaml new file mode 100644 index 0000000000..d7faeb81f7 --- /dev/null +++ b/dts/Bindings/phy/brcm,kona-usb2-phy.yaml @@ -0,0 +1,36 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/phy/brcm,kona-usb2-phy.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Broadcom Kona family USB 2.0 PHY + +maintainers: + - Florian Fainelli <f.fainelli@gmail.com> + +properties: + compatible: + const: brcm,kona-usb2-phy + + reg: + maxItems: 1 + + '#phy-cells': + const: 0 + +required: + - compatible + - reg + - '#phy-cells' + +additionalProperties: false + +examples: + - | + usb-phy@3f130000 { + compatible = "brcm,kona-usb2-phy"; + reg = <0x3f130000 0x28>; + #phy-cells = <0>; + }; +... diff --git a/dts/Bindings/phy/brcm,sata-phy.yaml b/dts/Bindings/phy/brcm,sata-phy.yaml index 435b971dfd..8467c8e636 100644 --- a/dts/Bindings/phy/brcm,sata-phy.yaml +++ b/dts/Bindings/phy/brcm,sata-phy.yaml @@ -1,8 +1,8 @@ # SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) %YAML 1.2 --- -$id: "http://devicetree.org/schemas/phy/brcm,sata-phy.yaml#" -$schema: "http://devicetree.org/meta-schemas/core.yaml#" +$id: http://devicetree.org/schemas/phy/brcm,sata-phy.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# title: Broadcom SATA3 PHY diff --git a/dts/Bindings/phy/cdns,salvo-phy.yaml b/dts/Bindings/phy/cdns,salvo-phy.yaml index 3a07285b54..c7281a7c82 100644 --- a/dts/Bindings/phy/cdns,salvo-phy.yaml +++ b/dts/Bindings/phy/cdns,salvo-phy.yaml @@ -2,8 +2,8 @@ # Copyright (c) 2020 NXP %YAML 1.2 --- -$id: "http://devicetree.org/schemas/phy/cdns,salvo-phy.yaml#" -$schema: "http://devicetree.org/meta-schemas/core.yaml#" +$id: http://devicetree.org/schemas/phy/cdns,salvo-phy.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# title: Cadence SALVO PHY @@ -31,6 +31,12 @@ properties: "#phy-cells": const: 0 + cdns,usb2-disconnect-threshold-microvolt: + description: The microvolt threshold value utilized for detecting + USB disconnection event. + enum: [575, 610, 645] + default: 575 + required: - compatible - reg diff --git a/dts/Bindings/phy/fsl,imx8mq-usb-phy.yaml b/dts/Bindings/phy/fsl,imx8mq-usb-phy.yaml index e6f9f5540c..dc3a3f709f 100644 --- a/dts/Bindings/phy/fsl,imx8mq-usb-phy.yaml +++ b/dts/Bindings/phy/fsl,imx8mq-usb-phy.yaml @@ -35,6 +35,53 @@ properties: description: A phandle to the regulator for USB VBUS. + fsl,phy-tx-vref-tune-percent: + description: + Tunes the HS DC level relative to the nominal level + minimum: 94 + maximum: 124 + + fsl,phy-tx-rise-tune-percent: + description: + Adjusts the rise/fall time duration of the HS waveform relative to + its nominal value + minimum: 97 + maximum: 103 + + fsl,phy-tx-preemp-amp-tune-microamp: + description: + Adjust amount of current sourced to DPn and DMn after a J-to-K + or K-to-J transition. Default is 0 (disabled). + minimum: 0 + maximum: 1800 + + fsl,phy-tx-vboost-level-microvolt: + description: + Adjust the boosted transmit launch pk-pk differential amplitude + minimum: 880 + maximum: 1120 + + fsl,phy-comp-dis-tune-percent: + description: + Adjust the voltage level used to detect a disconnect event at the host + relative to the nominal value + minimum: 91 + maximum: 115 + + fsl,phy-pcs-tx-deemph-3p5db-attenuation-db: + description: + Adjust TX de-emphasis attenuation in dB at nominal + 3.5dB point as per USB specification + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 36 + + fsl,phy-pcs-tx-swing-full-percent: + description: + Scaling of the voltage defined by fsl,phy-tx-vboost-level-microvolt + minimum: 0 + maximum: 100 + required: - compatible - reg diff --git a/dts/Bindings/phy/fsl,mxs-usbphy.yaml b/dts/Bindings/phy/fsl,mxs-usbphy.yaml new file mode 100644 index 0000000000..f4b1ca2fb5 --- /dev/null +++ b/dts/Bindings/phy/fsl,mxs-usbphy.yaml @@ -0,0 +1,128 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/phy/fsl,mxs-usbphy.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Freescale MXS USB Phy Device + +maintainers: + - Xu Yang <xu.yang_2@nxp.com> + +properties: + compatible: + oneOf: + - enum: + - fsl,imx23-usbphy + - fsl,imx7ulp-usbphy + - fsl,vf610-usbphy + - items: + - enum: + - fsl,imx28-usbphy + - fsl,imx6ul-usbphy + - fsl,imx6sl-usbphy + - fsl,imx6sx-usbphy + - fsl,imx6q-usbphy + - const: fsl,imx23-usbphy + - items: + - const: fsl,imx6sll-usbphy + - const: fsl,imx6ul-usbphy + - const: fsl,imx23-usbphy + - items: + - enum: + - fsl,imx8dxl-usbphy + - fsl,imx8qm-usbphy + - fsl,imx8ulp-usbphy + - const: fsl,imx7ulp-usbphy + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + maxItems: 1 + + '#phy-cells': + const: 0 + + power-domains: + maxItems: 1 + + fsl,anatop: + description: + phandle for anatop register, it is only for imx6 SoC series. + $ref: /schemas/types.yaml#/definitions/phandle + + phy-3p0-supply: + description: + One of USB PHY's power supply. Can be used to keep a good signal + quality. + + fsl,tx-cal-45-dn-ohms: + description: + Resistance (in ohms) of switchable high-speed trimming resistor + connected in parallel with the 45 ohm resistor that terminates + the DN output signal. + minimum: 35 + maximum: 54 + default: 45 + + fsl,tx-cal-45-dp-ohms: + description: + Resistance (in ohms) of switchable high-speed trimming resistor + connected in parallel with the 45 ohm resistor that terminates + the DP output signal. + minimum: 35 + maximum: 54 + default: 45 + + fsl,tx-d-cal: + description: + Current trimming value (as a percentage) of the 17.78 mA TX + reference current. + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 79 + maximum: 119 + default: 100 + +required: + - compatible + - reg + - clocks + +allOf: + - if: + properties: + compatible: + oneOf: + - enum: + - fsl,imx6q-usbphy + - fsl,imx6sl-usbphy + - fsl,imx6sx-usbphy + - fsl,imx6sll-usbphy + - fsl,vf610-usbphy + - items: + - const: fsl,imx6ul-usbphy + - const: fsl,imx23-usbphy + then: + required: + - fsl,anatop + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/clock/imx6qdl-clock.h> + + usbphy1: usb-phy@20c9000 { + compatible = "fsl,imx6q-usbphy", "fsl,imx23-usbphy"; + reg = <0x020c9000 0x1000>; + clocks = <&clks IMX6QDL_CLK_USBPHY1>; + interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>; + fsl,anatop = <&anatop>; + }; + +... diff --git a/dts/Bindings/phy/hisilicon,hi3660-usb3.yaml b/dts/Bindings/phy/hisilicon,hi3660-usb3.yaml index 20b79e2e8b..405c6b0b88 100644 --- a/dts/Bindings/phy/hisilicon,hi3660-usb3.yaml +++ b/dts/Bindings/phy/hisilicon,hi3660-usb3.yaml @@ -19,15 +19,16 @@ properties: const: 0 hisilicon,pericrg-syscon: - $ref: '/schemas/types.yaml#/definitions/phandle' + $ref: /schemas/types.yaml#/definitions/phandle description: phandle of syscon used to control iso refclk. hisilicon,pctrl-syscon: - $ref: '/schemas/types.yaml#/definitions/phandle' + $ref: /schemas/types.yaml#/definitions/phandle description: phandle of syscon used to control usb tcxo. hisilicon,eye-diagram-param: - $ref: /schemas/types.yaml#/definitions/uint32 + $ref: /schemas/types.yaml#/definitions/uint32-array + maxItems: 1 description: Eye diagram for phy. required: diff --git a/dts/Bindings/phy/hisilicon,hi3670-usb3.yaml b/dts/Bindings/phy/hisilicon,hi3670-usb3.yaml index 1cb00dbcd4..a1a8a84dfc 100644 --- a/dts/Bindings/phy/hisilicon,hi3670-usb3.yaml +++ b/dts/Bindings/phy/hisilicon,hi3670-usb3.yaml @@ -20,19 +20,20 @@ properties: const: 0 hisilicon,pericrg-syscon: - $ref: '/schemas/types.yaml#/definitions/phandle' + $ref: /schemas/types.yaml#/definitions/phandle description: phandle of syscon used to control iso refclk. hisilicon,pctrl-syscon: - $ref: '/schemas/types.yaml#/definitions/phandle' + $ref: /schemas/types.yaml#/definitions/phandle description: phandle of syscon used to control usb tcxo. hisilicon,sctrl-syscon: - $ref: '/schemas/types.yaml#/definitions/phandle' + $ref: /schemas/types.yaml#/definitions/phandle description: phandle of syscon used to control phy deep sleep. hisilicon,eye-diagram-param: - $ref: /schemas/types.yaml#/definitions/uint32 + $ref: /schemas/types.yaml#/definitions/uint32-array + maxItems: 1 description: Eye diagram for phy. hisilicon,tx-vboost-lvl: diff --git a/dts/Bindings/phy/intel,combo-phy.yaml b/dts/Bindings/phy/intel,combo-phy.yaml index 5d54b0a0e8..7dd6a4d94b 100644 --- a/dts/Bindings/phy/intel,combo-phy.yaml +++ b/dts/Bindings/phy/intel,combo-phy.yaml @@ -15,7 +15,7 @@ description: | properties: $nodename: - pattern: "combophy(@.*|-[0-9a-f])*$" + pattern: "combophy(@.*|-([0-9]|[1-9][0-9]+))?$" compatible: items: diff --git a/dts/Bindings/phy/intel,phy-thunderbay-emmc.yaml b/dts/Bindings/phy/intel,phy-thunderbay-emmc.yaml deleted file mode 100644 index 361ffc35b1..0000000000 --- a/dts/Bindings/phy/intel,phy-thunderbay-emmc.yaml +++ /dev/null @@ -1,45 +0,0 @@ -# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) -%YAML 1.2 ---- -$id: http://devicetree.org/schemas/phy/intel,phy-thunderbay-emmc.yaml# -$schema: http://devicetree.org/meta-schemas/core.yaml# - -title: Intel Thunder Bay eMMC PHY - -maintainers: - - Srikandan Nandhini <nandhini.srikandan@intel.com> - -properties: - compatible: - const: intel,thunderbay-emmc-phy - - "#phy-cells": - const: 0 - - reg: - maxItems: 1 - - clocks: - maxItems: 1 - - clock-names: - items: - - const: emmcclk - -required: - - "#phy-cells" - - compatible - - reg - - clocks - -additionalProperties: false - -examples: - - | - mmc_phy@80440800 { - #phy-cells = <0x0>; - compatible = "intel,thunderbay-emmc-phy"; - reg = <0x80440800 0x100>; - clocks = <&emmc>; - clock-names = "emmcclk"; - }; diff --git a/dts/Bindings/phy/marvell,armada-3700-utmi-phy.yaml b/dts/Bindings/phy/marvell,armada-3700-utmi-phy.yaml index 632d61c07f..3aa1a46796 100644 --- a/dts/Bindings/phy/marvell,armada-3700-utmi-phy.yaml +++ b/dts/Bindings/phy/marvell,armada-3700-utmi-phy.yaml @@ -2,8 +2,8 @@ %YAML 1.2 --- -$id: "http://devicetree.org/schemas/phy/marvell,armada-3700-utmi-phy.yaml#" -$schema: "http://devicetree.org/meta-schemas/core.yaml#" +$id: http://devicetree.org/schemas/phy/marvell,armada-3700-utmi-phy.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# title: Marvell Armada UTMI/UTMI+ PHY diff --git a/dts/Bindings/phy/marvell,armada-cp110-utmi-phy.yaml b/dts/Bindings/phy/marvell,armada-cp110-utmi-phy.yaml index 30f3b5f32a..9ce7b4c6d2 100644 --- a/dts/Bindings/phy/marvell,armada-cp110-utmi-phy.yaml +++ b/dts/Bindings/phy/marvell,armada-cp110-utmi-phy.yaml @@ -2,8 +2,8 @@ %YAML 1.2 --- -$id: "http://devicetree.org/schemas/phy/marvell,armada-cp110-utmi-phy.yaml#" -$schema: "http://devicetree.org/meta-schemas/core.yaml#" +$id: http://devicetree.org/schemas/phy/marvell,armada-cp110-utmi-phy.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# title: Marvell Armada CP110/CP115 UTMI PHY @@ -41,7 +41,7 @@ properties: Phandle to the system controller node $ref: /schemas/types.yaml#/definitions/phandle -#Required child nodes: +# Required child nodes: patternProperties: "^usb-phy@[0|1]$": diff --git a/dts/Bindings/phy/marvell,mmp3-hsic-phy.yaml b/dts/Bindings/phy/marvell,mmp3-hsic-phy.yaml index ff255aa4cc..bd3bd2f8b1 100644 --- a/dts/Bindings/phy/marvell,mmp3-hsic-phy.yaml +++ b/dts/Bindings/phy/marvell,mmp3-hsic-phy.yaml @@ -2,8 +2,8 @@ # Copyright 2019 Lubomir Rintel <lkundrak@v3.sk> %YAML 1.2 --- -$id: "http://devicetree.org/schemas/phy/marvell,mmp3-hsic-phy.yaml#" -$schema: "http://devicetree.org/meta-schemas/core.yaml#" +$id: http://devicetree.org/schemas/phy/marvell,mmp3-hsic-phy.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# title: Marvell MMP3 HSIC PHY diff --git a/dts/Bindings/phy/marvell,pxa1928-usb-phy.yaml b/dts/Bindings/phy/marvell,pxa1928-usb-phy.yaml new file mode 100644 index 0000000000..be33f036cd --- /dev/null +++ b/dts/Bindings/phy/marvell,pxa1928-usb-phy.yaml @@ -0,0 +1,47 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/phy/marvell,pxa1928-usb-phy.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Marvell PXA1928 USB/HSIC PHY + +maintainers: + - Duje Mihanović <duje.mihanovic@skole.hr> + +properties: + compatible: + enum: + - marvell,pxa1928-usb-phy + - marvell,pxa1928-hsic-phy + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + + '#phy-cells': + const: 0 + + resets: + maxItems: 1 + +required: + - compatible + - reg + - clocks + - '#phy-cells' + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/marvell,pxa1928.h> + + usbphy: phy@7000 { + compatible = "marvell,pxa1928-usb-phy"; + reg = <0x7000 0xe0>; + clocks = <&apmu PXA1928_CLK_USB>; + #phy-cells = <0>; + }; diff --git a/dts/Bindings/phy/mediatek,dsi-phy.yaml b/dts/Bindings/phy/mediatek,dsi-phy.yaml index 26f2b887cf..f6e494d0d8 100644 --- a/dts/Bindings/phy/mediatek,dsi-phy.yaml +++ b/dts/Bindings/phy/mediatek,dsi-phy.yaml @@ -26,6 +26,12 @@ properties: - const: mediatek,mt2701-mipi-tx - items: - enum: + - mediatek,mt6795-mipi-tx + - const: mediatek,mt8173-mipi-tx + - items: + - enum: + - mediatek,mt8188-mipi-tx + - mediatek,mt8195-mipi-tx - mediatek,mt8365-mipi-tx - const: mediatek,mt8183-mipi-tx - const: mediatek,mt2701-mipi-tx @@ -83,7 +89,7 @@ examples: clocks = <&clk26m>; clock-output-names = "mipi_tx0_pll"; drive-strength-microamp = <4000>; - nvmem-cells= <&mipi_tx_calibration>; + nvmem-cells = <&mipi_tx_calibration>; nvmem-cell-names = "calibration-data"; #clock-cells = <0>; #phy-cells = <0>; diff --git a/dts/Bindings/phy/mediatek,hdmi-phy.yaml b/dts/Bindings/phy/mediatek,hdmi-phy.yaml index 6cfdaadec0..f3a8b0b745 100644 --- a/dts/Bindings/phy/mediatek,hdmi-phy.yaml +++ b/dts/Bindings/phy/mediatek,hdmi-phy.yaml @@ -28,6 +28,7 @@ properties: - const: mediatek,mt2701-hdmi-phy - const: mediatek,mt2701-hdmi-phy - const: mediatek,mt8173-hdmi-phy + - const: mediatek,mt8195-hdmi-phy reg: maxItems: 1 diff --git a/dts/Bindings/phy/mediatek,mt7621-pci-phy.yaml b/dts/Bindings/phy/mediatek,mt7621-pci-phy.yaml index c2f4cb0b25..99eac888ae 100644 --- a/dts/Bindings/phy/mediatek,mt7621-pci-phy.yaml +++ b/dts/Bindings/phy/mediatek,mt7621-pci-phy.yaml @@ -1,8 +1,8 @@ -# SPDX-License-Identifier: (GPL-2.0-only or BSD-2-Clause) +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) %YAML 1.2 --- -$id: "http://devicetree.org/schemas/phy/mediatek,mt7621-pci-phy.yaml#" -$schema: "http://devicetree.org/meta-schemas/core.yaml#" +$id: http://devicetree.org/schemas/phy/mediatek,mt7621-pci-phy.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# title: Mediatek Mt7621 PCIe PHY diff --git a/dts/Bindings/phy/mediatek,mt7628-usbphy.yaml b/dts/Bindings/phy/mediatek,mt7628-usbphy.yaml new file mode 100644 index 0000000000..ce2c228e32 --- /dev/null +++ b/dts/Bindings/phy/mediatek,mt7628-usbphy.yaml @@ -0,0 +1,74 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/phy/mediatek,mt7628-usbphy.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Mediatek/Ralink USB PHY + +maintainers: + - Sergio Paracuellos <sergio.paracuellos@gmail.com> + +properties: + compatible: + enum: + - mediatek,mt7620-usbphy + - mediatek,mt7628-usbphy + - ralink,rt3352-usbphy + + reg: + maxItems: 1 + + "#phy-cells": + const: 0 + + ralink,sysctl: + description: + phandle to a ralink syscon register region. + $ref: /schemas/types.yaml#/definitions/phandle + + resets: + items: + - description: USB Host reset controller + - description: USB Device reset controller + + reset-names: + items: + - const: host + - const: device + +required: + - compatible + - "#phy-cells" + - ralink,sysctl + - resets + - reset-names + +allOf: + - if: + properties: + compatible: + contains: + const: mediatek,mt7628-usbphy + then: + required: + - reg + else: + properties: + reg: false + +additionalProperties: false + +examples: + - | + phy@10120000 { + compatible = "mediatek,mt7628-usbphy"; + reg = <0x10120000 0x1000>; + #phy-cells = <0>; + ralink,sysctl = <&sysc>; + resets = <&rstctrl 22>, + <&rstctrl 25>; + reset-names = "host", "device"; + }; + +... diff --git a/dts/Bindings/phy/mediatek,mt8365-csi-rx.yaml b/dts/Bindings/phy/mediatek,mt8365-csi-rx.yaml new file mode 100644 index 0000000000..2127a5732f --- /dev/null +++ b/dts/Bindings/phy/mediatek,mt8365-csi-rx.yaml @@ -0,0 +1,79 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +# Copyright (c) 2023 MediaTek, BayLibre +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/phy/mediatek,mt8365-csi-rx.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Mediatek Sensor Interface MIPI CSI CD-PHY + +maintainers: + - Julien Stephan <jstephan@baylibre.com> + - Andy Hsieh <andy.hsieh@mediatek.com> + +description: + The SENINF CD-PHY is a set of CD-PHY connected to the SENINF CSI-2 + receivers. The number of PHYs depends on the SoC model. + Depending on the SoC model, each PHYs can be either CD-PHY or D-PHY only + capable. + +properties: + compatible: + enum: + - mediatek,mt8365-csi-rx + + reg: + maxItems: 1 + + num-lanes: + enum: [2, 3, 4] + + '#phy-cells': + enum: [0, 1] + description: | + If the PHY doesn't support mode selection then #phy-cells must be 0 and + PHY mode is described using phy-type property. + If the PHY supports mode selection, then #phy-cells must be 1 and mode + is set in the PHY cells. Supported modes are: + - PHY_TYPE_DPHY + - PHY_TYPE_CPHY + See include/dt-bindings/phy/phy.h for constants. + + phy-type: + description: + If the PHY doesn't support mode selection then this set the operating mode. + See include/dt-bindings/phy/phy.h for constants. + const: 10 + $ref: /schemas/types.yaml#/definitions/uint32 + +required: + - compatible + - reg + - num-lanes + - '#phy-cells' + +additionalProperties: false + +examples: + - | + #include <dt-bindings/phy/phy.h> + soc { + #address-cells = <2>; + #size-cells = <2>; + + csi0_rx: phy@11c10000 { + compatible = "mediatek,mt8365-csi-rx"; + reg = <0 0x11c10000 0 0x2000>; + num-lanes = <2>; + #phy-cells = <1>; + }; + + csi1_rx: phy@11c12000 { + compatible = "mediatek,mt8365-csi-rx"; + reg = <0 0x11c12000 0 0x2000>; + phy-type = <PHY_TYPE_DPHY>; + num-lanes = <2>; + #phy-cells = <0>; + }; + }; +... diff --git a/dts/Bindings/phy/mediatek,tphy.yaml b/dts/Bindings/phy/mediatek,tphy.yaml index 5613cc5106..acba072012 100644 --- a/dts/Bindings/phy/mediatek,tphy.yaml +++ b/dts/Bindings/phy/mediatek,tphy.yaml @@ -64,7 +64,7 @@ description: | properties: $nodename: - pattern: "^t-phy@[0-9a-f]+$" + pattern: "^t-phy(@[0-9a-f]+)?$" compatible: oneOf: @@ -79,6 +79,7 @@ properties: - enum: - mediatek,mt2712-tphy - mediatek,mt7629-tphy + - mediatek,mt7986-tphy - mediatek,mt8183-tphy - mediatek,mt8186-tphy - mediatek,mt8192-tphy @@ -234,6 +235,15 @@ patternProperties: Specify the flag to enable BC1.2 if support it type: boolean + mediatek,force-mode: + description: + The force mode is used to manually switch the shared phy mode between + USB3 and PCIe, when USB3 phy type is selected by the consumer, and + force-mode is set, will cause phy's power and pipe toggled and force + phy as USB3 mode which switched from default PCIe mode. But perfer to + use the property "mediatek,syscon-type" for newer SoCs that support it. + type: boolean + mediatek,syscon-type: $ref: /schemas/types.yaml#/definitions/phandle-array maxItems: 1 diff --git a/dts/Bindings/phy/meson-gxl-usb2-phy.txt b/dts/Bindings/phy/meson-gxl-usb2-phy.txt deleted file mode 100644 index b84a02ebff..0000000000 --- a/dts/Bindings/phy/meson-gxl-usb2-phy.txt +++ /dev/null @@ -1,21 +0,0 @@ -* Amlogic Meson GXL and GXM USB2 PHY binding - -Required properties: -- compatible: Should be "amlogic,meson-gxl-usb2-phy" -- reg: The base address and length of the registers -- #phys-cells: must be 0 (see phy-bindings.txt in this directory) - -Optional properties: -- clocks: a phandle to the clock of this PHY -- clock-names: must be "phy" -- resets: a phandle to the reset line of this PHY -- reset-names: must be "phy" -- phy-supply: see phy-bindings.txt in this directory - - -Example: - usb2_phy0: phy@78000 { - compatible = "amlogic,meson-gxl-usb2-phy"; - #phy-cells = <0>; - reg = <0x0 0x78000 0x0 0x20>; - }; diff --git a/dts/Bindings/phy/mixel,mipi-dsi-phy.yaml b/dts/Bindings/phy/mixel,mipi-dsi-phy.yaml index 786cfd71cb..3c28ec50f0 100644 --- a/dts/Bindings/phy/mixel,mipi-dsi-phy.yaml +++ b/dts/Bindings/phy/mixel,mipi-dsi-phy.yaml @@ -32,15 +32,6 @@ properties: clock-names: const: phy_ref - assigned-clocks: - maxItems: 1 - - assigned-clock-parents: - maxItems: 1 - - assigned-clock-rates: - maxItems: 1 - "#phy-cells": const: 0 diff --git a/dts/Bindings/phy/mxs-usb-phy.txt b/dts/Bindings/phy/mxs-usb-phy.txt deleted file mode 100644 index 70c813b075..0000000000 --- a/dts/Bindings/phy/mxs-usb-phy.txt +++ /dev/null @@ -1,33 +0,0 @@ -* Freescale MXS USB Phy Device - -Required properties: -- compatible: should contain: - * "fsl,imx23-usbphy" for imx23 and imx28 - * "fsl,imx6q-usbphy" for imx6dq and imx6dl - * "fsl,imx6sl-usbphy" for imx6sl - * "fsl,vf610-usbphy" for Vybrid vf610 - * "fsl,imx6sx-usbphy" for imx6sx - * "fsl,imx7ulp-usbphy" for imx7ulp - * "fsl,imx8dxl-usbphy" for imx8dxl - "fsl,imx23-usbphy" is still a fallback for other strings -- reg: Should contain registers location and length -- interrupts: Should contain phy interrupt -- fsl,anatop: phandle for anatop register, it is only for imx6 SoC series - -Optional properties: -- fsl,tx-cal-45-dn-ohms: Integer [35-54]. Resistance (in ohms) of switchable - high-speed trimming resistor connected in parallel with the 45 ohm resistor - that terminates the DN output signal. Default: 45 -- fsl,tx-cal-45-dp-ohms: Integer [35-54]. Resistance (in ohms) of switchable - high-speed trimming resistor connected in parallel with the 45 ohm resistor - that terminates the DP output signal. Default: 45 -- fsl,tx-d-cal: Integer [79-119]. Current trimming value (as a percentage) of - the 17.78mA TX reference current. Default: 100 - -Example: -usbphy1: usb-phy@20c9000 { - compatible = "fsl,imx6q-usbphy", "fsl,imx23-usbphy"; - reg = <0x020c9000 0x1000>; - interrupts = <0 44 0x04>; - fsl,anatop = <&anatop>; -}; diff --git a/dts/Bindings/phy/nvidia,tegra124-xusb-padctl.txt b/dts/Bindings/phy/nvidia,tegra124-xusb-padctl.txt deleted file mode 100644 index b62397d2bb..0000000000 --- a/dts/Bindings/phy/nvidia,tegra124-xusb-padctl.txt +++ /dev/null @@ -1,779 +0,0 @@ -Device tree binding for NVIDIA Tegra XUSB pad controller -======================================================== - -The Tegra XUSB pad controller manages a set of I/O lanes (with differential -signals) which connect directly to pins/pads on the SoC package. Each lane -is controlled by a HW block referred to as a "pad" in the Tegra hardware -documentation. Each such "pad" may control either one or multiple lanes, -and thus contains any logic common to all its lanes. Each lane can be -separately configured and powered up. - -Some of the lanes are high-speed lanes, which can be used for PCIe, SATA or -super-speed USB. Other lanes are for various types of low-speed, full-speed -or high-speed USB (such as UTMI, ULPI and HSIC). The XUSB pad controller -contains a software-configurable mux that sits between the I/O controller -ports (e.g. PCIe) and the lanes. - -In addition to per-lane configuration, USB 3.0 ports may require additional -settings on a per-board basis. - -Pads will be represented as children of the top-level XUSB pad controller -device tree node. Each lane exposed by the pad will be represented by its -own subnode and can be referenced by users of the lane using the standard -PHY bindings, as described by the phy-bindings.txt file in this directory. - -The Tegra hardware documentation refers to the connection between the XUSB -pad controller and the XUSB controller as "ports". This is confusing since -"port" is typically used to denote the physical USB receptacle. The device -tree binding in this document uses the term "port" to refer to the logical -abstraction of the signals that are routed to a USB receptacle (i.e. a PHY -for the USB signal, the VBUS power supply, the USB 2.0 companion port for -USB 3.0 receptacles, ...). - -Required properties: --------------------- -- compatible: Must be: - - Tegra124: "nvidia,tegra124-xusb-padctl" - - Tegra132: "nvidia,tegra132-xusb-padctl", "nvidia,tegra124-xusb-padctl" - - Tegra210: "nvidia,tegra210-xusb-padctl" - - Tegra186: "nvidia,tegra186-xusb-padctl" - - Tegra194: "nvidia,tegra194-xusb-padctl" -- reg: Physical base address and length of the controller's registers. -- resets: Must contain an entry for each entry in reset-names. -- reset-names: Must include the following entries: - - "padctl" - -For Tegra124: -- avdd-pll-utmip-supply: UTMI PLL power supply. Must supply 1.8 V. -- avdd-pll-erefe-supply: PLLE reference PLL power supply. Must supply 1.05 V. -- avdd-pex-pll-supply: PCIe/USB3 PLL power supply. Must supply 1.05 V. -- hvdd-pex-pll-e-supply: High-voltage PLLE power supply. Must supply 3.3 V. - -For Tegra210: -- avdd-pll-utmip-supply: UTMI PLL power supply. Must supply 1.8 V. -- avdd-pll-uerefe-supply: PLLE reference PLL power supply. Must supply 1.05 V. -- dvdd-pex-pll-supply: PCIe/USB3 PLL power supply. Must supply 1.05 V. -- hvdd-pex-pll-e-supply: High-voltage PLLE power supply. Must supply 1.8 V. -- nvidia,pmc: phandle and specifier referring to the Tegra210 PMC node. - -For Tegra186: -- avdd-pll-erefeut-supply: UPHY brick and reference clock as well as UTMI PHY - power supply. Must supply 1.8 V. -- avdd-usb-supply: USB I/Os, VBUS, ID, REXT, D+/D- power supply. Must supply - 3.3 V. -- vclamp-usb-supply: Bias rail for USB pad. Must supply 1.8 V. -- vddio-hsic-supply: HSIC PHY power supply. Must supply 1.2 V. - -For Tegra194: -- avdd-usb-supply: USB I/Os, VBUS, ID, REXT, D+/D- power supply. Must supply - 3.3 V. -- vclamp-usb-supply: Bias rail for USB pad. Must supply 1.8 V. - -Pad nodes: -========== - -A required child node named "pads" contains a list of subnodes, one for each -of the pads exposed by the XUSB pad controller. Each pad may need additional -resources that can be referenced in its pad node. - -The "status" property is used to enable or disable the use of a pad. If set -to "disabled", the pad will not be used on the given board. In order to use -the pad and any of its lanes, this property must be set to "okay". - -For Tegra124 and Tegra132, the following pads exist: usb2, ulpi, hsic, pcie -and sata. No extra resources are required for operation of these pads. - -For Tegra210, the following pads exist: usb2, hsic, pcie and sata. Below is -a description of the properties of each pad. - -UTMI pad: ---------- - -Required properties: -- clocks: Must contain an entry for each entry in clock-names. -- clock-names: Must contain the following entries: - - "trk": phandle and specifier referring to the USB2 tracking clock - -HSIC pad: ---------- - -Required properties: -- clocks: Must contain an entry for each entry in clock-names. -- clock-names: Must contain the following entries: - - "trk": phandle and specifier referring to the HSIC tracking clock - -PCIe pad: ---------- - -Required properties: -- clocks: Must contain an entry for each entry in clock-names. -- clock-names: Must contain the following entries: - - "pll": phandle and specifier referring to the PLLE -- resets: Must contain an entry for each entry in reset-names. -- reset-names: Must contain the following entries: - - "phy": reset for the PCIe UPHY block - -SATA pad: ---------- - -Required properties: -- resets: Must contain an entry for each entry in reset-names. -- reset-names: Must contain the following entries: - - "phy": reset for the SATA UPHY block - - -PHY nodes: -========== - -Each pad node has a child named "lanes" that contains one or more children of -its own, each representing one of the lanes controlled by the pad. - -Required properties: --------------------- -- status: Defines the operation status of the PHY. Valid values are: - - "disabled": the PHY is disabled - - "okay": the PHY is enabled -- #phy-cells: Should be 0. Since each lane represents a single PHY, there is - no need for an additional specifier. -- nvidia,function: The output function of the PHY. See below for a list of - valid functions per SoC generation. - -For Tegra124 and Tegra132, the list of valid PHY nodes is given below: -- usb2: usb2-0, usb2-1, usb2-2 - - functions: "snps", "xusb", "uart" -- ulpi: ulpi-0 - - functions: "snps", "xusb" -- hsic: hsic-0, hsic-1 - - functions: "snps", "xusb" -- pcie: pcie-0, pcie-1, pcie-2, pcie-3, pcie-4 - - functions: "pcie", "usb3-ss" -- sata: sata-0 - - functions: "usb3-ss", "sata" - -For Tegra210, the list of valid PHY nodes is given below: -- usb2: usb2-0, usb2-1, usb2-2, usb2-3 - - functions: "snps", "xusb", "uart" -- hsic: hsic-0, hsic-1 - - functions: "snps", "xusb" -- pcie: pcie-0, pcie-1, pcie-2, pcie-3, pcie-4, pcie-5, pcie-6 - - functions: "pcie-x1", "usb3-ss", "pcie-x4" -- sata: sata-0 - - functions: "usb3-ss", "sata" - -For Tegra194, the list of valid PHY nodes is given below: -- usb2: usb2-0, usb2-1, usb2-2, usb2-3 - - functions: "xusb" -- usb3: usb3-0, usb3-1, usb3-2, usb3-3 - - functions: "xusb" - -Port nodes: -=========== - -A required child node named "ports" contains a list of all the ports exposed -by the XUSB pad controller. Per-port configuration is only required for USB. - -USB2 ports: ------------ - -Required properties: -- status: Defines the operation status of the port. Valid values are: - - "disabled": the port is disabled - - "okay": the port is enabled -- mode: A string that determines the mode in which to run the port. Valid - values are: - - "host": for USB host mode - - "device": for USB device mode - - "otg": for USB OTG mode - -Required properties for OTG/Peripheral capable USB2 ports: -- usb-role-switch: Boolean property to indicate that the port support OTG or - peripheral mode. If present, the port supports switching between USB host - and peripheral roles. Connector should be added as subnode. - See usb/usb-conn-gpio.txt. - -Optional properties: -- nvidia,internal: A boolean property whose presence determines that a port - is internal. In the absence of this property the port is considered to be - external. -- vbus-supply: phandle to a regulator supplying the VBUS voltage. - -ULPI ports: ------------ - -Optional properties: -- status: Defines the operation status of the port. Valid values are: - - "disabled": the port is disabled - - "okay": the port is enabled -- nvidia,internal: A boolean property whose presence determines that a port - is internal. In the absence of this property the port is considered to be - external. -- vbus-supply: phandle to a regulator supplying the VBUS voltage. - -HSIC ports: ------------ - -Required properties: -- status: Defines the operation status of the port. Valid values are: - - "disabled": the port is disabled - - "okay": the port is enabled - -Optional properties: -- vbus-supply: phandle to a regulator supplying the VBUS voltage. - -Super-speed USB ports: ----------------------- - -Required properties: -- status: Defines the operation status of the port. Valid values are: - - "disabled": the port is disabled - - "okay": the port is enabled -- nvidia,usb2-companion: A single cell that specifies the physical port number - to map this super-speed USB port to. The range of valid port numbers varies - with the SoC generation: - - 0-2: for Tegra124 and Tegra132 - - 0-3: for Tegra210 - -Optional properties: -- nvidia,internal: A boolean property whose presence determines that a port - is internal. In the absence of this property the port is considered to be - external. - -- maximum-speed: Only for Tegra194. A string property that specifies maximum - supported speed of a usb3 port. Valid values are: - - "super-speed-plus": default, the usb3 port supports USB 3.1 Gen 2 speed. - - "super-speed": the usb3 port supports USB 3.1 Gen 1 speed only. - -For Tegra124 and Tegra132, the XUSB pad controller exposes the following -ports: -- 3x USB2: usb2-0, usb2-1, usb2-2 -- 1x ULPI: ulpi-0 -- 2x HSIC: hsic-0, hsic-1 -- 2x super-speed USB: usb3-0, usb3-1 - -For Tegra210, the XUSB pad controller exposes the following ports: -- 4x USB2: usb2-0, usb2-1, usb2-2, usb2-3 -- 2x HSIC: hsic-0, hsic-1 -- 4x super-speed USB: usb3-0, usb3-1, usb3-2, usb3-3 - -For Tegra194, the XUSB pad controller exposes the following ports: -- 4x USB2: usb2-0, usb2-1, usb2-2, usb2-3 -- 4x super-speed USB: usb3-0, usb3-1, usb3-2, usb3-3 - -Examples: -========= - -Tegra124 and Tegra132: ----------------------- - -SoC include: - - padctl@7009f000 { - /* for Tegra124 */ - compatible = "nvidia,tegra124-xusb-padctl"; - /* for Tegra132 */ - compatible = "nvidia,tegra132-xusb-padctl", - "nvidia,tegra124-xusb-padctl"; - reg = <0x0 0x7009f000 0x0 0x1000>; - resets = <&tegra_car 142>; - reset-names = "padctl"; - - pads { - usb2 { - status = "disabled"; - - lanes { - usb2-0 { - status = "disabled"; - #phy-cells = <0>; - }; - - usb2-1 { - status = "disabled"; - #phy-cells = <0>; - }; - - usb2-2 { - status = "disabled"; - #phy-cells = <0>; - }; - }; - }; - - ulpi { - status = "disabled"; - - lanes { - ulpi-0 { - status = "disabled"; - #phy-cells = <0>; - }; - }; - }; - - hsic { - status = "disabled"; - - lanes { - hsic-0 { - status = "disabled"; - #phy-cells = <0>; - }; - - hsic-1 { - status = "disabled"; - #phy-cells = <0>; - }; - }; - }; - - pcie { - status = "disabled"; - - lanes { - pcie-0 { - status = "disabled"; - #phy-cells = <0>; - }; - - pcie-1 { - status = "disabled"; - #phy-cells = <0>; - }; - - pcie-2 { - status = "disabled"; - #phy-cells = <0>; - }; - - pcie-3 { - status = "disabled"; - #phy-cells = <0>; - }; - - pcie-4 { - status = "disabled"; - #phy-cells = <0>; - }; - }; - }; - - sata { - status = "disabled"; - - lanes { - sata-0 { - status = "disabled"; - #phy-cells = <0>; - }; - }; - }; - }; - - ports { - usb2-0 { - status = "disabled"; - }; - - usb2-1 { - status = "disabled"; - }; - - usb2-2 { - status = "disabled"; - }; - - ulpi-0 { - status = "disabled"; - }; - - hsic-0 { - status = "disabled"; - }; - - hsic-1 { - status = "disabled"; - }; - - usb3-0 { - status = "disabled"; - }; - - usb3-1 { - status = "disabled"; - }; - }; - }; - -Board file: - - padctl@7009f000 { - status = "okay"; - - pads { - usb2 { - status = "okay"; - - lanes { - usb2-0 { - nvidia,function = "xusb"; - status = "okay"; - }; - - usb2-1 { - nvidia,function = "xusb"; - status = "okay"; - }; - - usb2-2 { - nvidia,function = "xusb"; - status = "okay"; - }; - }; - }; - - pcie { - status = "okay"; - - lanes { - pcie-0 { - nvidia,function = "usb3-ss"; - status = "okay"; - }; - - pcie-2 { - nvidia,function = "pcie"; - status = "okay"; - }; - - pcie-4 { - nvidia,function = "pcie"; - status = "okay"; - }; - }; - }; - - sata { - status = "okay"; - - lanes { - sata-0 { - nvidia,function = "sata"; - status = "okay"; - }; - }; - }; - }; - - ports { - /* Micro A/B */ - usb2-0 { - status = "okay"; - mode = "otg"; - }; - - /* Mini PCIe */ - usb2-1 { - status = "okay"; - mode = "host"; - }; - - /* USB3 */ - usb2-2 { - status = "okay"; - mode = "host"; - - vbus-supply = <&vdd_usb3_vbus>; - }; - - usb3-0 { - nvidia,port = <2>; - status = "okay"; - }; - }; - }; - -Tegra210: ---------- - -SoC include: - - padctl@7009f000 { - compatible = "nvidia,tegra210-xusb-padctl"; - reg = <0x0 0x7009f000 0x0 0x1000>; - resets = <&tegra_car 142>; - reset-names = "padctl"; - - status = "disabled"; - - pads { - usb2 { - clocks = <&tegra_car TEGRA210_CLK_USB2_TRK>; - clock-names = "trk"; - status = "disabled"; - - lanes { - usb2-0 { - status = "disabled"; - #phy-cells = <0>; - }; - - usb2-1 { - status = "disabled"; - #phy-cells = <0>; - }; - - usb2-2 { - status = "disabled"; - #phy-cells = <0>; - }; - - usb2-3 { - status = "disabled"; - #phy-cells = <0>; - }; - }; - }; - - hsic { - clocks = <&tegra_car TEGRA210_CLK_HSIC_TRK>; - clock-names = "trk"; - status = "disabled"; - - lanes { - hsic-0 { - status = "disabled"; - #phy-cells = <0>; - }; - - hsic-1 { - status = "disabled"; - #phy-cells = <0>; - }; - }; - }; - - pcie { - clocks = <&tegra_car TEGRA210_CLK_PLL_E>; - clock-names = "pll"; - resets = <&tegra_car 205>; - reset-names = "phy"; - status = "disabled"; - - lanes { - pcie-0 { - status = "disabled"; - #phy-cells = <0>; - }; - - pcie-1 { - status = "disabled"; - #phy-cells = <0>; - }; - - pcie-2 { - status = "disabled"; - #phy-cells = <0>; - }; - - pcie-3 { - status = "disabled"; - #phy-cells = <0>; - }; - - pcie-4 { - status = "disabled"; - #phy-cells = <0>; - }; - - pcie-5 { - status = "disabled"; - #phy-cells = <0>; - }; - - pcie-6 { - status = "disabled"; - #phy-cells = <0>; - }; - }; - }; - - sata { - clocks = <&tegra_car TEGRA210_CLK_PLL_E>; - clock-names = "pll"; - resets = <&tegra_car 204>; - reset-names = "phy"; - status = "disabled"; - - lanes { - sata-0 { - status = "disabled"; - #phy-cells = <0>; - }; - }; - }; - }; - - ports { - usb2-0 { - status = "disabled"; - }; - - usb2-1 { - status = "disabled"; - }; - - usb2-2 { - status = "disabled"; - }; - - usb2-3 { - status = "disabled"; - }; - - hsic-0 { - status = "disabled"; - }; - - hsic-1 { - status = "disabled"; - }; - - usb3-0 { - status = "disabled"; - }; - - usb3-1 { - status = "disabled"; - }; - - usb3-2 { - status = "disabled"; - }; - - usb3-3 { - status = "disabled"; - }; - }; - }; - -Board file: - - padctl@7009f000 { - status = "okay"; - - pads { - usb2 { - status = "okay"; - - lanes { - usb2-0 { - nvidia,function = "xusb"; - status = "okay"; - }; - - usb2-1 { - nvidia,function = "xusb"; - status = "okay"; - }; - - usb2-2 { - nvidia,function = "xusb"; - status = "okay"; - }; - - usb2-3 { - nvidia,function = "xusb"; - status = "okay"; - }; - }; - }; - - pcie { - status = "okay"; - - lanes { - pcie-0 { - nvidia,function = "pcie-x1"; - status = "okay"; - }; - - pcie-1 { - nvidia,function = "pcie-x4"; - status = "okay"; - }; - - pcie-2 { - nvidia,function = "pcie-x4"; - status = "okay"; - }; - - pcie-3 { - nvidia,function = "pcie-x4"; - status = "okay"; - }; - - pcie-4 { - nvidia,function = "pcie-x4"; - status = "okay"; - }; - - pcie-5 { - nvidia,function = "usb3-ss"; - status = "okay"; - }; - - pcie-6 { - nvidia,function = "usb3-ss"; - status = "okay"; - }; - }; - }; - - sata { - status = "okay"; - - lanes { - sata-0 { - nvidia,function = "sata"; - status = "okay"; - }; - }; - }; - }; - - ports { - usb2-0 { - status = "okay"; - mode = "otg"; - }; - - usb2-1 { - status = "okay"; - vbus-supply = <&vdd_5v0_rtl>; - mode = "host"; - }; - - usb2-2 { - status = "okay"; - vbus-supply = <&vdd_usb_vbus>; - mode = "host"; - }; - - usb2-3 { - status = "okay"; - mode = "host"; - }; - - usb3-0 { - status = "okay"; - nvidia,lanes = "pcie-6"; - nvidia,port = <1>; - }; - - usb3-1 { - status = "okay"; - nvidia,lanes = "pcie-5"; - nvidia,port = <2>; - }; - }; - }; diff --git a/dts/Bindings/phy/nvidia,tegra124-xusb-padctl.yaml b/dts/Bindings/phy/nvidia,tegra124-xusb-padctl.yaml new file mode 100644 index 0000000000..33b41b6b2f --- /dev/null +++ b/dts/Bindings/phy/nvidia,tegra124-xusb-padctl.yaml @@ -0,0 +1,654 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/phy/nvidia,tegra124-xusb-padctl.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: NVIDIA Tegra124 XUSB pad controller + +maintainers: + - Thierry Reding <thierry.reding@gmail.com> + - Jon Hunter <jonathanh@nvidia.com> + +description: | + The Tegra XUSB pad controller manages a set of I/O lanes (with differential + signals) which connect directly to pins/pads on the SoC package. Each lane + is controlled by a HW block referred to as a "pad" in the Tegra hardware + documentation. Each such "pad" may control either one or multiple lanes, + and thus contains any logic common to all its lanes. Each lane can be + separately configured and powered up. + + Some of the lanes are high-speed lanes, which can be used for PCIe, SATA or + super-speed USB. Other lanes are for various types of low-speed, full-speed + or high-speed USB (such as UTMI, ULPI and HSIC). The XUSB pad controller + contains a software-configurable mux that sits between the I/O controller + ports (e.g. PCIe) and the lanes. + + In addition to per-lane configuration, USB 3.0 ports may require additional + settings on a per-board basis. + + Pads will be represented as children of the top-level XUSB pad controller + device tree node. Each lane exposed by the pad will be represented by its + own subnode and can be referenced by users of the lane using the standard + PHY bindings, as described by the phy-bindings.txt file in this directory. + + The Tegra hardware documentation refers to the connection between the XUSB + pad controller and the XUSB controller as "ports". This is confusing since + "port" is typically used to denote the physical USB receptacle. The device + tree binding in this document uses the term "port" to refer to the logical + abstraction of the signals that are routed to a USB receptacle (i.e. a PHY + for the USB signal, the VBUS power supply, the USB 2.0 companion port for + USB 3.0 receptacles, ...). + +properties: + compatible: + oneOf: + - enum: + - nvidia,tegra124-xusb-padctl + + - items: + - const: nvidia,tegra132-xusb-padctl + - const: nvidia,tegra124-xusb-padctl + + reg: + maxItems: 1 + + interrupts: + items: + - description: XUSB pad controller interrupt + + resets: + items: + - description: pad controller reset + + reset-names: + items: + - const: padctl + + avdd-pll-utmip-supply: + description: UTMI PLL power supply. Must supply 1.8 V. + + avdd-pll-erefe-supply: + description: PLLE reference PLL power supply. Must supply 1.05 V. + + avdd-pex-pll-supply: + description: PCIe/USB3 PLL power supply. Must supply 1.05 V. + + hvdd-pex-pll-e-supply: + description: High-voltage PLLE power supply. Must supply 3.3 V. + + pads: + description: A required child node named "pads" contains a list of + subnodes, one for each of the pads exposed by the XUSB pad controller. + Each pad may need additional resources that can be referenced in its + pad node. + + The "status" property is used to enable or disable the use of a pad. + If set to "disabled", the pad will not be used on the given board. In + order to use the pad and any of its lanes, this property must be set + to "okay" or be absent. + type: object + additionalProperties: false + properties: + usb2: + type: object + additionalProperties: false + properties: + clocks: + items: + - description: USB2 tracking clock + + clock-names: + items: + - const: trk + + lanes: + type: object + additionalProperties: false + properties: + usb2-0: + type: object + additionalProperties: false + properties: + "#phy-cells": + const: 0 + + nvidia,function: + description: Function selection for this lane. + $ref: /schemas/types.yaml#/definitions/string + enum: [ snps, xusb, uart ] + + usb2-1: + type: object + additionalProperties: false + properties: + "#phy-cells": + const: 0 + + nvidia,function: + description: Function selection for this lane. + $ref: /schemas/types.yaml#/definitions/string + enum: [ snps, xusb, uart ] + + usb2-2: + type: object + additionalProperties: false + properties: + "#phy-cells": + const: 0 + + nvidia,function: + description: Function selection for this lane. + $ref: /schemas/types.yaml#/definitions/string + enum: [ snps, xusb, uart ] + + ulpi: + type: object + additionalProperties: false + properties: + lanes: + type: object + additionalProperties: false + properties: + ulpi-0: + type: object + additionalProperties: false + properties: + "#phy-cells": + const: 0 + + nvidia,function: + description: Function selection for this lane. + $ref: /schemas/types.yaml#/definitions/string + enum: [ snps, xusb ] + + hsic: + type: object + additionalProperties: false + properties: + clocks: + items: + - description: HSIC tracking clock + + clock-names: + items: + - const: trk + + lanes: + type: object + additionalProperties: false + properties: + hsic-0: + type: object + additionalProperties: false + properties: + "#phy-cells": + const: 0 + + nvidia,function: + description: Function selection for this lane. + $ref: /schemas/types.yaml#/definitions/string + enum: [ snps, xusb ] + + hsic-1: + type: object + additionalProperties: false + properties: + "#phy-cells": + const: 0 + + nvidia,function: + description: Function selection for this lane. + $ref: /schemas/types.yaml#/definitions/string + enum: [ snps, xusb ] + + pcie: + type: object + additionalProperties: false + properties: + clocks: + items: + - description: PLLE clock + + clock-names: + items: + - const: pll + + resets: + items: + - description: reset for the PCIe UPHY block + + reset-names: + items: + - const: phy + + lanes: + type: object + additionalProperties: false + properties: + pcie-0: + type: object + additionalProperties: false + properties: + "#phy-cells": + const: 0 + + nvidia,function: + description: Function selection for this lane. + $ref: /schemas/types.yaml#/definitions/string + enum: [ pcie, usb3-ss ] + + pcie-1: + type: object + additionalProperties: false + properties: + "#phy-cells": + const: 0 + + nvidia,function: + description: Function selection for this lane. + $ref: /schemas/types.yaml#/definitions/string + enum: [ pcie, usb3-ss ] + + pcie-2: + type: object + additionalProperties: false + properties: + "#phy-cells": + const: 0 + + nvidia,function: + description: Function selection for this lane. + $ref: /schemas/types.yaml#/definitions/string + enum: [ pcie, usb3-ss ] + + pcie-3: + type: object + additionalProperties: false + properties: + "#phy-cells": + const: 0 + + nvidia,function: + description: Function selection for this lane. + $ref: /schemas/types.yaml#/definitions/string + enum: [ pcie, usb3-ss ] + + pcie-4: + type: object + additionalProperties: false + properties: + "#phy-cells": + const: 0 + + nvidia,function: + description: Function selection for this lane. + $ref: /schemas/types.yaml#/definitions/string + enum: [ pcie, usb3-ss ] + + sata: + type: object + additionalProperties: false + properties: + resets: + items: + - description: reset for the SATA UPHY block + + reset-names: + items: + - const: phy + + lanes: + type: object + additionalProperties: false + properties: + sata-0: + type: object + additionalProperties: false + properties: + "#phy-cells": + const: 0 + + nvidia,function: + description: Function selection for this lane. + $ref: /schemas/types.yaml#/definitions/string + enum: [ sata, usb3-ss ] + + ports: + description: A required child node named "ports" contains a list of + subnodes, one for each of the ports exposed by the XUSB pad controller. + Each port may need additional resources that can be referenced in its + port node. + + The "status" property is used to enable or disable the use of a port. + If set to "disabled", the port will not be used on the given board. In + order to use the port, this property must be set to "okay". + type: object + additionalProperties: false + properties: + usb2-0: + type: object + additionalProperties: false + properties: + # no need to further describe this because the connector will + # match on gpio-usb-b-connector or usb-b-connector and cause + # that binding to be selected for the subnode + connector: + type: object + + mode: + description: A string that determines the mode in which to + run the port. + $ref: /schemas/types.yaml#/definitions/string + enum: [ host, peripheral, otg ] + + nvidia,internal: + description: A boolean property whose presence determines + that a port is internal. In the absence of this property + the port is considered to be external. + $ref: /schemas/types.yaml#/definitions/flag + + usb-role-switch: + description: | + A boolean property whole presence indicates that the port + supports OTG or peripheral mode. If present, the port + supports switching between USB host and peripheral roles. + A connector must be added as a subnode in that case. + + See ../connector/usb-connector.yaml. + + vbus-supply: + description: A phandle to the regulator supplying the VBUS + voltage. + + usb2-1: + type: object + additionalProperties: false + properties: + # no need to further describe this because the connector will + # match on gpio-usb-b-connector or usb-b-connector and cause + # that binding to be selected for the subnode + connector: + type: object + + mode: + description: A string that determines the mode in which to + run the port. + $ref: /schemas/types.yaml#/definitions/string + enum: [ host, peripheral, otg ] + + nvidia,internal: + description: A boolean property whose presence determines + that a port is internal. In the absence of this property + the port is considered to be external. + $ref: /schemas/types.yaml#/definitions/flag + + usb-role-switch: + description: | + A boolean property whole presence indicates that the port + supports OTG or peripheral mode. If present, the port + supports switching between USB host and peripheral roles. + A connector must be added as a subnode in that case. + + See ../connector/usb-connector.yaml. + + vbus-supply: + description: A phandle to the regulator supplying the VBUS + voltage. + + usb2-2: + type: object + additionalProperties: false + properties: + # no need to further describe this because the connector will + # match on gpio-usb-b-connector or usb-b-connector and cause + # that binding to be selected for the subnode + connector: + type: object + + mode: + description: A string that determines the mode in which to + run the port. + $ref: /schemas/types.yaml#/definitions/string + enum: [ host, peripheral, otg ] + + nvidia,internal: + description: A boolean property whose presence determines + that a port is internal. In the absence of this property + the port is considered to be external. + $ref: /schemas/types.yaml#/definitions/flag + + usb-role-switch: + description: | + A boolean property whole presence indicates that the port + supports OTG or peripheral mode. If present, the port + supports switching between USB host and peripheral roles. + A connector must be added as a subnode in that case. + + See ../connector/usb-connector.yaml. + + vbus-supply: + description: A phandle to the regulator supplying the VBUS + voltage. + + ulpi-0: + type: object + additionalProperties: false + properties: + nvidia,internal: + description: A boolean property whose presence determines + that a port is internal. In the absence of this property + the port is considered to be external. + $ref: /schemas/types.yaml#/definitions/flag + + vbus-supply: + description: A phandle to the regulator supplying the VBUS + voltage. + + hsic-0: + type: object + additionalProperties: false + properties: + vbus-supply: + description: A phandle to the regulator supplying the VBUS + voltage. + + hsic-1: + type: object + additionalProperties: false + properties: + vbus-supply: + description: A phandle to the regulator supplying the VBUS + voltage. + + usb3-0: + type: object + additionalProperties: false + properties: + nvidia,internal: + description: A boolean property whose presence determines + that a port is internal. In the absence of this property + the port is considered to be external. + $ref: /schemas/types.yaml#/definitions/flag + + nvidia,usb2-companion: + description: A single cell that specifies the physical port + number to map this super-speed USB port to. The range of + valid port numbers varies with the SoC generation. + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [ 0, 1, 2 ] + + vbus-supply: + description: A phandle to the regulator supplying the VBUS + voltage. + + usb3-1: + type: object + additionalProperties: false + properties: + nvidia,internal: + description: A boolean property whose presence determines + that a port is internal. In the absence of this property + the port is considered to be external. + $ref: /schemas/types.yaml#/definitions/flag + + nvidia,usb2-companion: + description: A single cell that specifies the physical port + number to map this super-speed USB port to. The range of + valid port numbers varies with the SoC generation. + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [ 0, 1, 2 ] + + vbus-supply: + description: A phandle to the regulator supplying the VBUS + voltage. + +additionalProperties: false + +required: + - compatible + - reg + - resets + - reset-names + - avdd-pll-utmip-supply + - avdd-pll-erefe-supply + - avdd-pex-pll-supply + - hvdd-pex-pll-e-supply + +examples: + # Tegra124 and Tegra132 + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + + padctl@7009f000 { + compatible = "nvidia,tegra124-xusb-padctl"; + reg = <0x7009f000 0x1000>; + interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>; + resets = <&tegra_car 142>; + reset-names = "padctl"; + + avdd-pll-utmip-supply = <&vddio_1v8>; + avdd-pll-erefe-supply = <&avdd_1v05_run>; + avdd-pex-pll-supply = <&vdd_1v05_run>; + hvdd-pex-pll-e-supply = <&vdd_3v3_lp0>; + + pads { + usb2 { + lanes { + usb2-0 { + nvidia,function = "xusb"; + #phy-cells = <0>; + }; + + usb2-1 { + nvidia,function = "xusb"; + #phy-cells = <0>; + }; + + usb2-2 { + nvidia,function = "xusb"; + #phy-cells = <0>; + }; + }; + }; + + ulpi { + lanes { + ulpi-0 { + status = "disabled"; + #phy-cells = <0>; + }; + }; + }; + + hsic { + lanes { + hsic-0 { + status = "disabled"; + #phy-cells = <0>; + }; + + hsic-1 { + status = "disabled"; + #phy-cells = <0>; + }; + }; + }; + + pcie { + lanes { + pcie-0 { + nvidia,function = "usb3-ss"; + #phy-cells = <0>; + }; + + pcie-1 { + status = "disabled"; + #phy-cells = <0>; + }; + + pcie-2 { + nvidia,function = "pcie"; + #phy-cells = <0>; + }; + + pcie-3 { + status = "disabled"; + #phy-cells = <0>; + }; + + pcie-4 { + nvidia,function = "pcie"; + #phy-cells = <0>; + }; + }; + }; + + sata { + lanes { + sata-0 { + nvidia,function = "sata"; + #phy-cells = <0>; + }; + }; + }; + }; + + ports { + /* Micro A/B */ + usb2-0 { + mode = "otg"; + }; + + /* Mini PCIe */ + usb2-1 { + mode = "host"; + }; + + /* USB3 */ + usb2-2 { + vbus-supply = <&vdd_usb3_vbus>; + mode = "host"; + }; + + ulpi-0 { + status = "disabled"; + }; + + hsic-0 { + status = "disabled"; + }; + + hsic-1 { + status = "disabled"; + }; + + usb3-0 { + nvidia,usb2-companion = <2>; + }; + + usb3-1 { + status = "disabled"; + }; + }; + }; diff --git a/dts/Bindings/phy/nvidia,tegra186-xusb-padctl.yaml b/dts/Bindings/phy/nvidia,tegra186-xusb-padctl.yaml new file mode 100644 index 0000000000..8b1d5a8529 --- /dev/null +++ b/dts/Bindings/phy/nvidia,tegra186-xusb-padctl.yaml @@ -0,0 +1,544 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/phy/nvidia,tegra186-xusb-padctl.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: NVIDIA Tegra186 XUSB pad controller + +maintainers: + - Thierry Reding <thierry.reding@gmail.com> + - Jon Hunter <jonathanh@nvidia.com> + +description: | + The Tegra XUSB pad controller manages a set of I/O lanes (with differential + signals) which connect directly to pins/pads on the SoC package. Each lane + is controlled by a HW block referred to as a "pad" in the Tegra hardware + documentation. Each such "pad" may control either one or multiple lanes, + and thus contains any logic common to all its lanes. Each lane can be + separately configured and powered up. + + Some of the lanes are high-speed lanes, which can be used for PCIe, SATA or + super-speed USB. Other lanes are for various types of low-speed, full-speed + or high-speed USB (such as UTMI, ULPI and HSIC). The XUSB pad controller + contains a software-configurable mux that sits between the I/O controller + ports (e.g. PCIe) and the lanes. + + In addition to per-lane configuration, USB 3.0 ports may require additional + settings on a per-board basis. + + Pads will be represented as children of the top-level XUSB pad controller + device tree node. Each lane exposed by the pad will be represented by its + own subnode and can be referenced by users of the lane using the standard + PHY bindings, as described by the phy-bindings.txt file in this directory. + + The Tegra hardware documentation refers to the connection between the XUSB + pad controller and the XUSB controller as "ports". This is confusing since + "port" is typically used to denote the physical USB receptacle. The device + tree binding in this document uses the term "port" to refer to the logical + abstraction of the signals that are routed to a USB receptacle (i.e. a PHY + for the USB signal, the VBUS power supply, the USB 2.0 companion port for + USB 3.0 receptacles, ...). + +properties: + compatible: + const: nvidia,tegra186-xusb-padctl + + reg: + items: + - description: pad controller registers + - description: AO registers + + interrupts: + items: + - description: XUSB pad controller interrupt + + reg-names: + items: + - const: padctl + - const: ao + + resets: + items: + - description: pad controller reset + + reset-names: + items: + - const: padctl + + avdd-pll-erefeut-supply: + description: UPHY brick and reference clock as well as UTMI PHY + power supply. Must supply 1.8 V. + + avdd-usb-supply: + description: USB I/Os, VBUS, ID, REXT, D+/D- power supply. Must + supply 3.3 V. + + vclamp-usb-supply: + description: Bias rail for USB pad. Must supply 1.8 V. + + vddio-hsic-supply: + description: HSIC PHY power supply. Must supply 1.2 V. + + pads: + description: A required child node named "pads" contains a list of + subnodes, one for each of the pads exposed by the XUSB pad controller. + Each pad may need additional resources that can be referenced in its + pad node. + + The "status" property is used to enable or disable the use of a pad. + If set to "disabled", the pad will not be used on the given board. In + order to use the pad and any of its lanes, this property must be set + to "okay" or be absent. + type: object + additionalProperties: false + properties: + usb2: + type: object + additionalProperties: false + properties: + clocks: + items: + - description: USB2 tracking clock + + clock-names: + items: + - const: trk + + lanes: + type: object + additionalProperties: false + properties: + usb2-0: + type: object + additionalProperties: false + properties: + "#phy-cells": + const: 0 + + nvidia,function: + description: Function selection for this lane. + $ref: /schemas/types.yaml#/definitions/string + enum: [ xusb ] + + usb2-1: + type: object + additionalProperties: false + properties: + "#phy-cells": + const: 0 + + nvidia,function: + description: Function selection for this lane. + $ref: /schemas/types.yaml#/definitions/string + enum: [ xusb ] + + usb2-2: + type: object + additionalProperties: false + properties: + "#phy-cells": + const: 0 + + nvidia,function: + description: Function selection for this lane. + $ref: /schemas/types.yaml#/definitions/string + enum: [ xusb ] + + hsic: + type: object + additionalProperties: false + properties: + clocks: + items: + - description: HSIC tracking clock + + clock-names: + items: + - const: trk + + lanes: + type: object + additionalProperties: false + properties: + hsic-0: + type: object + additionalProperties: false + properties: + "#phy-cells": + const: 0 + + nvidia,function: + description: Function selection for this lane. + $ref: /schemas/types.yaml#/definitions/string + enum: [ xusb ] + + usb3: + type: object + additionalProperties: false + properties: + lanes: + type: object + additionalProperties: false + properties: + usb3-0: + type: object + additionalProperties: false + properties: + "#phy-cells": + const: 0 + + nvidia,function: + description: Function selection for this lane. + $ref: /schemas/types.yaml#/definitions/string + enum: [ xusb ] + + usb3-1: + type: object + additionalProperties: false + properties: + "#phy-cells": + const: 0 + + nvidia,function: + description: Function selection for this lane. + $ref: /schemas/types.yaml#/definitions/string + enum: [ xusb ] + + usb3-2: + type: object + additionalProperties: false + properties: + "#phy-cells": + const: 0 + + nvidia,function: + description: Function selection for this lane. + $ref: /schemas/types.yaml#/definitions/string + enum: [ xusb ] + + ports: + description: A required child node named "ports" contains a list of + subnodes, one for each of the ports exposed by the XUSB pad controller. + Each port may need additional resources that can be referenced in its + port node. + + The "status" property is used to enable or disable the use of a port. + If set to "disabled", the port will not be used on the given board. In + order to use the port, this property must be set to "okay". + type: object + additionalProperties: false + properties: + usb2-0: + type: object + additionalProperties: false + properties: + # no need to further describe this because the connector will + # match on gpio-usb-b-connector or usb-b-connector and cause + # that binding to be selected for the subnode + connector: + type: object + + mode: + description: A string that determines the mode in which to + run the port. + $ref: /schemas/types.yaml#/definitions/string + enum: [ host, peripheral, otg ] + + nvidia,internal: + description: A boolean property whose presence determines + that a port is internal. In the absence of this property + the port is considered to be external. + $ref: /schemas/types.yaml#/definitions/flag + + usb-role-switch: + description: | + A boolean property whole presence indicates that the port + supports OTG or peripheral mode. If present, the port + supports switching between USB host and peripheral roles. + A connector must be added as a subnode in that case. + + See ../connector/usb-connector.yaml. + + vbus-supply: + description: A phandle to the regulator supplying the VBUS + voltage. + + dependencies: + usb-role-switch: [ connector ] + + usb2-1: + type: object + additionalProperties: false + properties: + # no need to further describe this because the connector will + # match on gpio-usb-b-connector or usb-b-connector and cause + # that binding to be selected for the subnode + connector: + type: object + + mode: + description: A string that determines the mode in which to + run the port. + $ref: /schemas/types.yaml#/definitions/string + enum: [ host, peripheral, otg ] + + nvidia,internal: + description: A boolean property whose presence determines + that a port is internal. In the absence of this property + the port is considered to be external. + $ref: /schemas/types.yaml#/definitions/flag + + usb-role-switch: + description: | + A boolean property whole presence indicates that the port + supports OTG or peripheral mode. If present, the port + supports switching between USB host and peripheral roles. + A connector must be added as a subnode in that case. + + See ../connector/usb-connector.yaml. + + vbus-supply: + description: A phandle to the regulator supplying the VBUS + voltage. + + dependencies: + usb-role-switch: [ connector ] + + usb2-2: + type: object + additionalProperties: false + properties: + # no need to further describe this because the connector will + # match on gpio-usb-b-connector or usb-b-connector and cause + # that binding to be selected for the subnode + connector: + type: object + + mode: + description: A string that determines the mode in which to + run the port. + $ref: /schemas/types.yaml#/definitions/string + enum: [ host, peripheral, otg ] + + nvidia,internal: + description: A boolean property whose presence determines + that a port is internal. In the absence of this property + the port is considered to be external. + $ref: /schemas/types.yaml#/definitions/flag + + usb-role-switch: + description: | + A boolean property whole presence indicates that the port + supports OTG or peripheral mode. If present, the port + supports switching between USB host and peripheral roles. + A connector must be added as a subnode in that case. + + See ../connector/usb-connector.yaml. + + vbus-supply: + description: A phandle to the regulator supplying the VBUS + voltage. + + dependencies: + usb-role-switch: [ connector ] + + hsic-0: + type: object + additionalProperties: false + + usb3-0: + type: object + additionalProperties: false + properties: + nvidia,internal: + description: A boolean property whose presence determines + that a port is internal. In the absence of this property + the port is considered to be external. + $ref: /schemas/types.yaml#/definitions/flag + + nvidia,usb2-companion: + description: A single cell that specifies the physical port + number to map this super-speed USB port to. The range of + valid port numbers varies with the SoC generation. + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [ 0, 1, 2, 3 ] + + vbus-supply: + description: A phandle to the regulator supplying the VBUS + voltage. + + usb3-1: + type: object + additionalProperties: false + properties: + nvidia,internal: + description: A boolean property whose presence determines + that a port is internal. In the absence of this property + the port is considered to be external. + $ref: /schemas/types.yaml#/definitions/flag + + nvidia,usb2-companion: + description: A single cell that specifies the physical port + number to map this super-speed USB port to. The range of + valid port numbers varies with the SoC generation. + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [ 0, 1, 2, 3 ] + + vbus-supply: + description: A phandle to the regulator supplying the VBUS + voltage. + + usb3-2: + type: object + additionalProperties: false + properties: + nvidia,internal: + description: A boolean property whose presence determines + that a port is internal. In the absence of this property + the port is considered to be external. + $ref: /schemas/types.yaml#/definitions/flag + + nvidia,usb2-companion: + description: A single cell that specifies the physical port + number to map this super-speed USB port to. The range of + valid port numbers varies with the SoC generation. + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [ 0, 1, 2, 3 ] + + vbus-supply: + description: A phandle to the regulator supplying the VBUS + voltage. + +additionalProperties: false + +required: + - compatible + - reg + - resets + - reset-names + - avdd-pll-erefeut-supply + - avdd-usb-supply + - vclamp-usb-supply + - vddio-hsic-supply + +examples: + - | + #include <dt-bindings/clock/tegra186-clock.h> + #include <dt-bindings/gpio/tegra186-gpio.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/reset/tegra186-reset.h> + + padctl@3520000 { + compatible = "nvidia,tegra186-xusb-padctl"; + reg = <0x03520000 0x1000>, + <0x03540000 0x1000>; + reg-names = "padctl", "ao"; + interrupts = <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>; + + resets = <&bpmp TEGRA186_RESET_XUSB_PADCTL>; + reset-names = "padctl"; + + avdd-pll-erefeut-supply = <&vdd_1v8_pll>; + avdd-usb-supply = <&vdd_3v3_sys>; + vclamp-usb-supply = <&vdd_1v8>; + vddio-hsic-supply = <&gnd>; + + pads { + usb2 { + clocks = <&bpmp TEGRA186_CLK_USB2_TRK>; + clock-names = "trk"; + + lanes { + usb2-0 { + nvidia,function = "xusb"; + #phy-cells = <0>; + }; + + usb2-1 { + nvidia,function = "xusb"; + #phy-cells = <0>; + }; + + usb2-2 { + nvidia,function = "xusb"; + #phy-cells = <0>; + }; + }; + }; + + hsic { + clocks = <&bpmp TEGRA186_CLK_HSIC_TRK>; + clock-names = "trk"; + status = "disabled"; + + lanes { + hsic-0 { + status = "disabled"; + #phy-cells = <0>; + }; + }; + }; + + usb3 { + lanes { + usb3-0 { + nvidia,function = "xusb"; + #phy-cells = <0>; + }; + + usb3-1 { + nvidia,function = "xusb"; + #phy-cells = <0>; + }; + + usb3-2 { + nvidia,function = "xusb"; + #phy-cells = <0>; + }; + }; + }; + }; + + ports { + usb2-0 { + mode = "otg"; + vbus-supply = <&vdd_usb0>; + usb-role-switch; + + connector { + compatible = "gpio-usb-b-connector", + "usb-b-connector"; + label = "micro-USB"; + type = "micro"; + vbus-gpios = <&gpio TEGRA186_MAIN_GPIO(X, 7) GPIO_ACTIVE_LOW>; + id-gpios = <&pmic 0 GPIO_ACTIVE_HIGH>; + }; + }; + + usb2-1 { + vbus-supply = <&vdd_usb1>; + mode = "host"; + }; + + usb2-2 { + status = "disabled"; + }; + + hsic-0 { + status = "disabled"; + }; + + usb3-0 { + nvidia,usb2-companion = <1>; + }; + + usb3-1 { + status = "disabled"; + }; + + usb3-2 { + status = "disabled"; + }; + }; + }; diff --git a/dts/Bindings/phy/nvidia,tegra194-xusb-padctl.yaml b/dts/Bindings/phy/nvidia,tegra194-xusb-padctl.yaml new file mode 100644 index 0000000000..6e33983996 --- /dev/null +++ b/dts/Bindings/phy/nvidia,tegra194-xusb-padctl.yaml @@ -0,0 +1,632 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/phy/nvidia,tegra194-xusb-padctl.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: NVIDIA Tegra194 XUSB pad controller + +maintainers: + - Thierry Reding <thierry.reding@gmail.com> + - Jon Hunter <jonathanh@nvidia.com> + +description: | + The Tegra XUSB pad controller manages a set of I/O lanes (with differential + signals) which connect directly to pins/pads on the SoC package. Each lane + is controlled by a HW block referred to as a "pad" in the Tegra hardware + documentation. Each such "pad" may control either one or multiple lanes, + and thus contains any logic common to all its lanes. Each lane can be + separately configured and powered up. + + Some of the lanes are high-speed lanes, which can be used for PCIe, SATA or + super-speed USB. Other lanes are for various types of low-speed, full-speed + or high-speed USB (such as UTMI, ULPI and HSIC). The XUSB pad controller + contains a software-configurable mux that sits between the I/O controller + ports (e.g. PCIe) and the lanes. + + In addition to per-lane configuration, USB 3.0 ports may require additional + settings on a per-board basis. + + Pads will be represented as children of the top-level XUSB pad controller + device tree node. Each lane exposed by the pad will be represented by its + own subnode and can be referenced by users of the lane using the standard + PHY bindings, as described by the phy-bindings.txt file in this directory. + + The Tegra hardware documentation refers to the connection between the XUSB + pad controller and the XUSB controller as "ports". This is confusing since + "port" is typically used to denote the physical USB receptacle. The device + tree binding in this document uses the term "port" to refer to the logical + abstraction of the signals that are routed to a USB receptacle (i.e. a PHY + for the USB signal, the VBUS power supply, the USB 2.0 companion port for + USB 3.0 receptacles, ...). + +properties: + compatible: + enum: + - nvidia,tegra194-xusb-padctl + - nvidia,tegra234-xusb-padctl + + reg: + items: + - description: pad controller registers + - description: AO registers + + reg-names: + items: + - const: padctl + - const: ao + + interrupts: + items: + - description: XUSB pad controller interrupt + + resets: + items: + - description: pad controller reset + + reset-names: + items: + - const: padctl + + avdd-usb-supply: + description: USB I/Os, VBUS, ID, REXT, D+/D- power supply. Must + supply 3.3 V. + + vclamp-usb-supply: + description: Bias rail for USB pad. Must supply 1.8 V. + + pads: + description: A required child node named "pads" contains a list of + subnodes, one for each of the pads exposed by the XUSB pad controller. + Each pad may need additional resources that can be referenced in its + pad node. + + The "status" property is used to enable or disable the use of a pad. + If set to "disabled", the pad will not be used on the given board. In + order to use the pad and any of its lanes, this property must be set + to "okay" or absent. + type: object + additionalProperties: false + properties: + usb2: + type: object + additionalProperties: false + properties: + clocks: + items: + - description: USB2 tracking clock + + clock-names: + items: + - const: trk + + lanes: + type: object + additionalProperties: false + properties: + usb2-0: + type: object + additionalProperties: false + properties: + "#phy-cells": + const: 0 + + nvidia,function: + description: Function selection for this lane. + $ref: /schemas/types.yaml#/definitions/string + enum: [ xusb ] + + usb2-1: + type: object + additionalProperties: false + properties: + "#phy-cells": + const: 0 + + nvidia,function: + description: Function selection for this lane. + $ref: /schemas/types.yaml#/definitions/string + enum: [ xusb ] + + usb2-2: + type: object + additionalProperties: false + properties: + "#phy-cells": + const: 0 + + nvidia,function: + description: Function selection for this lane. + $ref: /schemas/types.yaml#/definitions/string + enum: [ xusb ] + + usb2-3: + type: object + additionalProperties: false + properties: + "#phy-cells": + const: 0 + + nvidia,function: + description: Function selection for this lane. + $ref: /schemas/types.yaml#/definitions/string + enum: [ xusb ] + + usb3: + type: object + additionalProperties: false + properties: + lanes: + type: object + additionalProperties: false + properties: + usb3-0: + type: object + additionalProperties: false + properties: + "#phy-cells": + const: 0 + + nvidia,function: + description: Function selection for this lane. + $ref: /schemas/types.yaml#/definitions/string + enum: [ xusb ] + + usb3-1: + type: object + additionalProperties: false + properties: + "#phy-cells": + const: 0 + + nvidia,function: + description: Function selection for this lane. + $ref: /schemas/types.yaml#/definitions/string + enum: [ xusb ] + + usb3-2: + type: object + additionalProperties: false + properties: + "#phy-cells": + const: 0 + + nvidia,function: + description: Function selection for this lane. + $ref: /schemas/types.yaml#/definitions/string + enum: [ xusb ] + + usb3-3: + type: object + additionalProperties: false + properties: + "#phy-cells": + const: 0 + + nvidia,function: + description: Function selection for this lane. + $ref: /schemas/types.yaml#/definitions/string + enum: [ xusb ] + + ports: + description: A required child node named "ports" contains a list of + subnodes, one for each of the ports exposed by the XUSB pad controller. + Each port may need additional resources that can be referenced in its + port node. + + The "status" property is used to enable or disable the use of a port. + If set to "disabled", the port will not be used on the given board. In + order to use the port, this property must be set to "okay". + type: object + additionalProperties: false + properties: + usb2-0: + type: object + additionalProperties: false + properties: + # no need to further describe this because the connector will + # match on gpio-usb-b-connector or usb-b-connector and cause + # that binding to be selected for the subnode + connector: + type: object + + mode: + description: A string that determines the mode in which to + run the port. + $ref: /schemas/types.yaml#/definitions/string + enum: [ host, peripheral, otg ] + + nvidia,internal: + description: A boolean property whose presence determines + that a port is internal. In the absence of this property + the port is considered to be external. + $ref: /schemas/types.yaml#/definitions/flag + + usb-role-switch: + description: | + A boolean property whole presence indicates that the port + supports OTG or peripheral mode. If present, the port + supports switching between USB host and peripheral roles. + A connector must be added as a subnode in that case. + + See ../connector/usb-connector.yaml. + + vbus-supply: + description: A phandle to the regulator supplying the VBUS + voltage. + + dependencies: + usb-role-switch: [ connector ] + + usb2-1: + type: object + additionalProperties: false + properties: + # no need to further describe this because the connector will + # match on gpio-usb-b-connector or usb-b-connector and cause + # that binding to be selected for the subnode + connector: + type: object + + mode: + description: A string that determines the mode in which to + run the port. + $ref: /schemas/types.yaml#/definitions/string + enum: [ host, peripheral, otg ] + + nvidia,internal: + description: A boolean property whose presence determines + that a port is internal. In the absence of this property + the port is considered to be external. + $ref: /schemas/types.yaml#/definitions/flag + + usb-role-switch: + description: | + A boolean property whole presence indicates that the port + supports OTG or peripheral mode. If present, the port + supports switching between USB host and peripheral roles. + A connector must be added as a subnode in that case. + + See ../connector/usb-connector.yaml. + + vbus-supply: + description: A phandle to the regulator supplying the VBUS + voltage. + + dependencies: + usb-role-switch: [ connector ] + + usb2-2: + type: object + additionalProperties: false + properties: + # no need to further describe this because the connector will + # match on gpio-usb-b-connector or usb-b-connector and cause + # that binding to be selected for the subnode + connector: + type: object + + mode: + description: A string that determines the mode in which to + run the port. + $ref: /schemas/types.yaml#/definitions/string + enum: [ host, peripheral, otg ] + + nvidia,internal: + description: A boolean property whose presence determines + that a port is internal. In the absence of this property + the port is considered to be external. + $ref: /schemas/types.yaml#/definitions/flag + + usb-role-switch: + description: | + A boolean property whole presence indicates that the port + supports OTG or peripheral mode. If present, the port + supports switching between USB host and peripheral roles. + A connector must be added as a subnode in that case. + + See ../connector/usb-connector.yaml. + + vbus-supply: + description: A phandle to the regulator supplying the VBUS + voltage. + + dependencies: + usb-role-switch: [ connector ] + + usb2-3: + type: object + additionalProperties: false + properties: + # no need to further describe this because the connector will + # match on gpio-usb-b-connector or usb-b-connector and cause + # that binding to be selected for the subnode + connector: + type: object + + mode: + description: A string that determines the mode in which to + run the port. + $ref: /schemas/types.yaml#/definitions/string + enum: [ host, peripheral, otg ] + + nvidia,internal: + description: A boolean property whose presence determines + that a port is internal. In the absence of this property + the port is considered to be external. + $ref: /schemas/types.yaml#/definitions/flag + + usb-role-switch: + description: | + A boolean property whole presence indicates that the port + supports OTG or peripheral mode. If present, the port + supports switching between USB host and peripheral roles. + A connector must be added as a subnode in that case. + + See ../connector/usb-connector.yaml. + + vbus-supply: + description: A phandle to the regulator supplying the VBUS + voltage. + + dependencies: + usb-role-switch: [ connector ] + + usb3-0: + type: object + additionalProperties: false + properties: + maximum-speed: + description: A string property that specifies the maximum + supported speed of a USB3 port. + $ref: /schemas/types.yaml#/definitions/string + oneOf: + - description: The USB3 port supports USB 3.1 Gen 2 speed. + This is the default. + const: super-speed-plus + - description: The USB3 port supports USB 3.1 Gen 1 speed + only. + const: super-speed + + nvidia,internal: + description: A boolean property whose presence determines + that a port is internal. In the absence of this property + the port is considered to be external. + $ref: /schemas/types.yaml#/definitions/flag + + nvidia,usb2-companion: + description: A single cell that specifies the physical port + number to map this super-speed USB port to. The range of + valid port numbers varies with the SoC generation. + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [ 0, 1, 2, 3 ] + + vbus-supply: + description: A phandle to the regulator supplying the VBUS + voltage. + + usb3-1: + type: object + additionalProperties: false + properties: + maximum-speed: + description: A string property that specifies the maximum + supported speed of a USB3 port. + $ref: /schemas/types.yaml#/definitions/string + oneOf: + - description: The USB3 port supports USB 3.1 Gen 2 speed. + This is the default. + const: super-speed-plus + - description: The USB3 port supports USB 3.1 Gen 1 speed + only. + const: super-speed + + nvidia,internal: + description: A boolean property whose presence determines + that a port is internal. In the absence of this property + the port is considered to be external. + $ref: /schemas/types.yaml#/definitions/flag + + nvidia,usb2-companion: + description: A single cell that specifies the physical port + number to map this super-speed USB port to. The range of + valid port numbers varies with the SoC generation. + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [ 0, 1, 2, 3 ] + + vbus-supply: + description: A phandle to the regulator supplying the VBUS + voltage. + + usb3-2: + type: object + additionalProperties: false + properties: + maximum-speed: + description: A string property that specifies the maximum + supported speed of a USB3 port. + $ref: /schemas/types.yaml#/definitions/string + oneOf: + - description: The USB3 port supports USB 3.1 Gen 2 speed. + This is the default. + const: super-speed-plus + - description: The USB3 port supports USB 3.1 Gen 1 speed + only. + const: super-speed + + nvidia,internal: + description: A boolean property whose presence determines + that a port is internal. In the absence of this property + the port is considered to be external. + $ref: /schemas/types.yaml#/definitions/flag + + nvidia,usb2-companion: + description: A single cell that specifies the physical port + number to map this super-speed USB port to. The range of + valid port numbers varies with the SoC generation. + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [ 0, 1, 2, 3 ] + + vbus-supply: + description: A phandle to the regulator supplying the VBUS + voltage. + + usb3-3: + type: object + additionalProperties: false + properties: + maximum-speed: + description: A string property that specifies the maximum + supported speed of a USB3 port. + $ref: /schemas/types.yaml#/definitions/string + oneOf: + - description: The USB3 port supports USB 3.1 Gen 2 speed. + This is the default. + const: super-speed-plus + - description: The USB3 port supports USB 3.1 Gen 1 speed + only. + const: super-speed + + nvidia,internal: + description: A boolean property whose presence determines + that a port is internal. In the absence of this property + the port is considered to be external. + $ref: /schemas/types.yaml#/definitions/flag + + nvidia,usb2-companion: + description: A single cell that specifies the physical port + number to map this super-speed USB port to. The range of + valid port numbers varies with the SoC generation. + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [ 0, 1, 2, 3 ] + + vbus-supply: + description: A phandle to the regulator supplying the VBUS + voltage. + +additionalProperties: false + +required: + - compatible + - reg + - resets + - reset-names + - avdd-usb-supply + - vclamp-usb-supply + +examples: + - | + #include <dt-bindings/clock/tegra194-clock.h> + #include <dt-bindings/gpio/tegra194-gpio.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/reset/tegra194-reset.h> + + padctl@3520000 { + compatible = "nvidia,tegra194-xusb-padctl"; + reg = <0x03520000 0x1000>, + <0x03540000 0x1000>; + reg-names = "padctl", "ao"; + interrupts = <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>; + + resets = <&bpmp TEGRA194_RESET_XUSB_PADCTL>; + reset-names = "padctl"; + + avdd-usb-supply = <&vdd_usb_3v3>; + vclamp-usb-supply = <&vdd_1v8ao>; + + pads { + usb2 { + clocks = <&bpmp TEGRA194_CLK_USB2_TRK>; + clock-names = "trk"; + + lanes { + usb2-0 { + nvidia,function = "xusb"; + status = "disabled"; + #phy-cells = <0>; + }; + + usb2-1 { + nvidia,function = "xusb"; + #phy-cells = <0>; + }; + + usb2-2 { + nvidia,function = "xusb"; + status = "disabled"; + #phy-cells = <0>; + }; + + usb2-3 { + nvidia,function = "xusb"; + #phy-cells = <0>; + }; + }; + }; + + usb3 { + lanes { + usb3-0 { + nvidia,function = "xusb"; + #phy-cells = <0>; + }; + + usb3-1 { + nvidia,function = "xusb"; + status = "disabled"; + #phy-cells = <0>; + }; + + usb3-2 { + nvidia,function = "xusb"; + status = "disabled"; + #phy-cells = <0>; + }; + + usb3-3 { + nvidia,function = "xusb"; + #phy-cells = <0>; + }; + }; + }; + }; + + ports { + usb2-0 { + status = "disabled"; + }; + + usb2-1 { + vbus-supply = <&vdd_5v0_sys>; + mode = "host"; + }; + + usb2-2 { + status = "disabled"; + }; + + usb2-3 { + vbus-supply = <&vdd_5v_sata>; + mode = "host"; + }; + + usb3-0 { + vbus-supply = <&vdd_5v0_sys>; + nvidia,usb2-companion = <1>; + }; + + usb3-1 { + status = "disabled"; + }; + + usb3-2 { + status = "disabled"; + }; + + usb3-3 { + maximum-speed = "super-speed"; + vbus-supply = <&vdd_5v0_sys>; + nvidia,usb2-companion = <3>; + }; + }; + }; diff --git a/dts/Bindings/phy/nvidia,tegra210-xusb-padctl.yaml b/dts/Bindings/phy/nvidia,tegra210-xusb-padctl.yaml new file mode 100644 index 0000000000..e9237c58ce --- /dev/null +++ b/dts/Bindings/phy/nvidia,tegra210-xusb-padctl.yaml @@ -0,0 +1,786 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/phy/nvidia,tegra210-xusb-padctl.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: NVIDIA Tegra210 XUSB pad controller + +maintainers: + - Thierry Reding <thierry.reding@gmail.com> + - Jon Hunter <jonathanh@nvidia.com> + +description: | + The Tegra XUSB pad controller manages a set of I/O lanes (with differential + signals) which connect directly to pins/pads on the SoC package. Each lane + is controlled by a HW block referred to as a "pad" in the Tegra hardware + documentation. Each such "pad" may control either one or multiple lanes, + and thus contains any logic common to all its lanes. Each lane can be + separately configured and powered up. + + Some of the lanes are high-speed lanes, which can be used for PCIe, SATA or + super-speed USB. Other lanes are for various types of low-speed, full-speed + or high-speed USB (such as UTMI, ULPI and HSIC). The XUSB pad controller + contains a software-configurable mux that sits between the I/O controller + ports (e.g. PCIe) and the lanes. + + In addition to per-lane configuration, USB 3.0 ports may require additional + settings on a per-board basis. + + Pads will be represented as children of the top-level XUSB pad controller + device tree node. Each lane exposed by the pad will be represented by its + own subnode and can be referenced by users of the lane using the standard + PHY bindings, as described by the phy-bindings.txt file in this directory. + + The Tegra hardware documentation refers to the connection between the XUSB + pad controller and the XUSB controller as "ports". This is confusing since + "port" is typically used to denote the physical USB receptacle. The device + tree binding in this document uses the term "port" to refer to the logical + abstraction of the signals that are routed to a USB receptacle (i.e. a PHY + for the USB signal, the VBUS power supply, the USB 2.0 companion port for + USB 3.0 receptacles, ...). + +properties: + compatible: + const: nvidia,tegra210-xusb-padctl + + reg: + maxItems: 1 + + resets: + items: + - description: pad controller reset + + interrupts: + items: + - description: XUSB pad controller interrupt + + reset-names: + items: + - const: padctl + + avdd-pll-utmip-supply: + description: UTMI PLL power supply. Must supply 1.8 V. + + avdd-pll-uerefe-supply: + description: PLLE reference PLL power supply. Must supply 1.05 V. + + dvdd-pex-pll-supply: + description: PCIe/USB3 PLL power supply. Must supply 1.05 V. + + hvdd-pex-pll-e-supply: + description: High-voltage PLLE power supply. Must supply 1.8 V. + + nvidia,pmc: + description: phandle to the Tegra Power Management Controller (PMC) node + $ref: /schemas/types.yaml#/definitions/phandle + + pads: + description: A required child node named "pads" contains a list of + subnodes, one for each of the pads exposed by the XUSB pad controller. + Each pad may need additional resources that can be referenced in its + pad node. + + The "status" property is used to enable or disable the use of a pad. + If set to "disabled", the pad will not be used on the given board. In + order to use the pad and any of its lanes, this property must be set + to "okay" or be absent. + type: object + additionalProperties: false + properties: + usb2: + type: object + additionalProperties: false + properties: + clocks: + items: + - description: USB2 tracking clock + + clock-names: + items: + - const: trk + + lanes: + type: object + additionalProperties: false + properties: + usb2-0: + type: object + additionalProperties: false + properties: + "#phy-cells": + const: 0 + + nvidia,function: + description: Function selection for this lane. + $ref: /schemas/types.yaml#/definitions/string + enum: [ snps, xusb, uart ] + + usb2-1: + type: object + additionalProperties: false + properties: + "#phy-cells": + const: 0 + + nvidia,function: + description: Function selection for this lane. + $ref: /schemas/types.yaml#/definitions/string + enum: [ snps, xusb, uart ] + + usb2-2: + type: object + additionalProperties: false + properties: + "#phy-cells": + const: 0 + + nvidia,function: + description: Function selection for this lane. + $ref: /schemas/types.yaml#/definitions/string + enum: [ snps, xusb, uart ] + + usb2-3: + type: object + additionalProperties: false + properties: + "#phy-cells": + const: 0 + + nvidia,function: + description: Function selection for this lane. + $ref: /schemas/types.yaml#/definitions/string + enum: [ snps, xusb, uart ] + + hsic: + type: object + additionalProperties: false + properties: + clocks: + items: + - description: HSIC tracking clock + + clock-names: + items: + - const: trk + + lanes: + type: object + additionalProperties: false + properties: + hsic-0: + type: object + additionalProperties: false + properties: + "#phy-cells": + const: 0 + + nvidia,function: + description: Function selection for this lane. + $ref: /schemas/types.yaml#/definitions/string + enum: [ snps, xusb ] + + hsic-1: + type: object + additionalProperties: false + properties: + "#phy-cells": + const: 0 + + nvidia,function: + description: Function selection for this lane. + $ref: /schemas/types.yaml#/definitions/string + enum: [ snps, xusb ] + + pcie: + type: object + additionalProperties: false + properties: + clocks: + items: + - description: PCIe PLL clock source + + clock-names: + items: + - const: pll + + resets: + items: + - description: PCIe PHY reset + + reset-names: + items: + - const: phy + + lanes: + type: object + additionalProperties: false + properties: + pcie-0: + type: object + additionalProperties: false + properties: + "#phy-cells": + const: 0 + + nvidia,function: + description: Function selection for this lane. + $ref: /schemas/types.yaml#/definitions/string + enum: [ pcie-x1, usb3-ss, pcie-x4 ] + + pcie-1: + type: object + additionalProperties: false + properties: + "#phy-cells": + const: 0 + + nvidia,function: + description: Function selection for this lane. + $ref: /schemas/types.yaml#/definitions/string + enum: [ pcie-x1, usb3-ss, pcie-x4 ] + + pcie-2: + type: object + additionalProperties: false + properties: + "#phy-cells": + const: 0 + + nvidia,function: + description: Function selection for this lane. + $ref: /schemas/types.yaml#/definitions/string + enum: [ pcie-x1, usb3-ss, pcie-x4 ] + + pcie-3: + type: object + additionalProperties: false + properties: + "#phy-cells": + const: 0 + + nvidia,function: + description: Function selection for this lane. + $ref: /schemas/types.yaml#/definitions/string + enum: [ pcie-x1, usb3-ss, pcie-x4 ] + + pcie-4: + type: object + additionalProperties: false + properties: + "#phy-cells": + const: 0 + + nvidia,function: + description: Function selection for this lane. + $ref: /schemas/types.yaml#/definitions/string + enum: [ pcie-x1, usb3-ss, pcie-x4 ] + + pcie-5: + type: object + additionalProperties: false + properties: + "#phy-cells": + const: 0 + + nvidia,function: + description: Function selection for this lane. + $ref: /schemas/types.yaml#/definitions/string + enum: [ pcie-x1, usb3-ss, pcie-x4 ] + + pcie-6: + type: object + additionalProperties: false + properties: + "#phy-cells": + const: 0 + + nvidia,function: + description: Function selection for this lane. + $ref: /schemas/types.yaml#/definitions/string + enum: [ pcie-x1, usb3-ss, pcie-x4 ] + + sata: + type: object + additionalProperties: false + properties: + clocks: + items: + - description: SATA PLL clock source + + clock-names: + items: + - const: pll + + resets: + items: + - description: SATA PHY reset + + reset-names: + items: + - const: phy + + lanes: + type: object + additionalProperties: false + properties: + sata-0: + type: object + additionalProperties: false + properties: + "#phy-cells": + const: 0 + + nvidia,function: + description: Function selection for this lane. + $ref: /schemas/types.yaml#/definitions/string + enum: [ usb3-ss, sata ] + + ports: + description: A required child node named "ports" contains a list of + subnodes, one for each of the ports exposed by the XUSB pad controller. + Each port may need additional resources that can be referenced in its + port node. + + The "status" property is used to enable or disable the use of a port. + If set to "disabled", the port will not be used on the given board. In + order to use the port, this property must be set to "okay". + type: object + additionalProperties: false + properties: + usb2-0: + type: object + additionalProperties: false + properties: + # no need to further describe this because the connector will + # match on gpio-usb-b-connector or usb-b-connector and cause + # that binding to be selected for the subnode + connector: + type: object + + mode: + description: A string that determines the mode in which to + run the port. + $ref: /schemas/types.yaml#/definitions/string + enum: [ host, peripheral, otg ] + + nvidia,internal: + description: A boolean property whose presence determines + that a port is internal. In the absence of this property + the port is considered to be external. + $ref: /schemas/types.yaml#/definitions/flag + + usb-role-switch: + description: | + A boolean property whole presence indicates that the port + supports OTG or peripheral mode. If present, the port + supports switching between USB host and peripheral roles. + A connector must be added as a subnode in that case. + + See ../connector/usb-connector.yaml. + + vbus-supply: + description: A phandle to the regulator supplying the VBUS + voltage. + + dependencies: + usb-role-switch: [ connector ] + + usb2-1: + type: object + additionalProperties: false + properties: + # no need to further describe this because the connector will + # match on gpio-usb-b-connector or usb-b-connector and cause + # that binding to be selected for the subnode + connector: + type: object + + mode: + description: A string that determines the mode in which to + run the port. + $ref: /schemas/types.yaml#/definitions/string + enum: [ host, peripheral, otg ] + + nvidia,internal: + description: A boolean property whose presence determines + that a port is internal. In the absence of this property + the port is considered to be external. + $ref: /schemas/types.yaml#/definitions/flag + + usb-role-switch: + description: | + A boolean property whole presence indicates that the port + supports OTG or peripheral mode. If present, the port + supports switching between USB host and peripheral roles. + A connector must be added as a subnode in that case. + + See ../connector/usb-connector.yaml. + + vbus-supply: + description: A phandle to the regulator supplying the VBUS + voltage. + + dependencies: + usb-role-switch: [ connector ] + + usb2-2: + type: object + additionalProperties: false + properties: + # no need to further describe this because the connector will + # match on gpio-usb-b-connector or usb-b-connector and cause + # that binding to be selected for the subnode + connector: + type: object + + mode: + description: A string that determines the mode in which to + run the port. + $ref: /schemas/types.yaml#/definitions/string + enum: [ host, peripheral, otg ] + + nvidia,internal: + description: A boolean property whose presence determines + that a port is internal. In the absence of this property + the port is considered to be external. + $ref: /schemas/types.yaml#/definitions/flag + + usb-role-switch: + description: | + A boolean property whole presence indicates that the port + supports OTG or peripheral mode. If present, the port + supports switching between USB host and peripheral roles. + A connector must be added as a subnode in that case. + + See ../connector/usb-connector.yaml. + + vbus-supply: + description: A phandle to the regulator supplying the VBUS + voltage. + + dependencies: + usb-role-switch: [ connector ] + + usb2-3: + type: object + additionalProperties: false + properties: + # no need to further describe this because the connector will + # match on gpio-usb-b-connector or usb-b-connector and cause + # that binding to be selected for the subnode + connector: + type: object + + mode: + description: A string that determines the mode in which to + run the port. + $ref: /schemas/types.yaml#/definitions/string + enum: [ host, peripheral, otg ] + + nvidia,internal: + description: A boolean property whose presence determines + that a port is internal. In the absence of this property + the port is considered to be external. + $ref: /schemas/types.yaml#/definitions/flag + + usb-role-switch: + description: | + A boolean property whole presence indicates that the port + supports OTG or peripheral mode. If present, the port + supports switching between USB host and peripheral roles. + A connector must be added as a subnode in that case. + + See ../connector/usb-connector.yaml. + + vbus-supply: + description: A phandle to the regulator supplying the VBUS + voltage. + + dependencies: + usb-role-switch: [ connector ] + + hsic-0: + type: object + additionalProperties: false + properties: + vbus-supply: + description: A phandle to the regulator supplying the VBUS + voltage. + + hsic-1: + type: object + additionalProperties: false + properties: + vbus-supply: + description: A phandle to the regulator supplying the VBUS + voltage. + + usb3-0: + type: object + additionalProperties: false + properties: + nvidia,internal: + description: A boolean property whose presence determines + that a port is internal. In the absence of this property + the port is considered to be external. + $ref: /schemas/types.yaml#/definitions/flag + + nvidia,usb2-companion: + description: A single cell that specifies the physical port + number to map this super-speed USB port to. The range of + valid port numbers varies with the SoC generation. + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [ 0, 1, 2, 3 ] + + vbus-supply: + description: A phandle to the regulator supplying the VBUS + voltage. + + usb3-1: + type: object + additionalProperties: false + properties: + nvidia,internal: + description: A boolean property whose presence determines + that a port is internal. In the absence of this property + the port is considered to be external. + $ref: /schemas/types.yaml#/definitions/flag + + nvidia,usb2-companion: + description: A single cell that specifies the physical port + number to map this super-speed USB port to. The range of + valid port numbers varies with the SoC generation. + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [ 0, 1, 2, 3 ] + + vbus-supply: + description: A phandle to the regulator supplying the VBUS + voltage. + + usb3-2: + type: object + additionalProperties: false + properties: + nvidia,internal: + description: A boolean property whose presence determines + that a port is internal. In the absence of this property + the port is considered to be external. + $ref: /schemas/types.yaml#/definitions/flag + + nvidia,usb2-companion: + description: A single cell that specifies the physical port + number to map this super-speed USB port to. The range of + valid port numbers varies with the SoC generation. + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [ 0, 1, 2, 3 ] + + vbus-supply: + description: A phandle to the regulator supplying the VBUS + voltage. + + usb3-3: + type: object + additionalProperties: false + properties: + nvidia,internal: + description: A boolean property whose presence determines + that a port is internal. In the absence of this property + the port is considered to be external. + $ref: /schemas/types.yaml#/definitions/flag + + nvidia,usb2-companion: + description: A single cell that specifies the physical port + number to map this super-speed USB port to. The range of + valid port numbers varies with the SoC generation. + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [ 0, 1, 2, 3 ] + + vbus-supply: + description: A phandle to the regulator supplying the VBUS + voltage. + +additionalProperties: false + +required: + - avdd-pll-utmip-supply + - avdd-pll-uerefe-supply + - dvdd-pex-pll-supply + - hvdd-pex-pll-e-supply + +examples: + - | + #include <dt-bindings/clock/tegra210-car.h> + #include <dt-bindings/gpio/tegra-gpio.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + + padctl@7009f000 { + compatible = "nvidia,tegra210-xusb-padctl"; + reg = <0x7009f000 0x1000>; + interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>; + resets = <&tegra_car 142>; + reset-names = "padctl"; + + avdd-pll-utmip-supply = <&vdd_1v8>; + avdd-pll-uerefe-supply = <&vdd_pex_1v05>; + dvdd-pex-pll-supply = <&vdd_pex_1v05>; + hvdd-pex-pll-e-supply = <&vdd_1v8>; + + pads { + usb2 { + clocks = <&tegra_car TEGRA210_CLK_USB2_TRK>; + clock-names = "trk"; + + lanes { + usb2-0 { + nvidia,function = "xusb"; + #phy-cells = <0>; + }; + + usb2-1 { + nvidia,function = "xusb"; + #phy-cells = <0>; + }; + + usb2-2 { + nvidia,function = "xusb"; + #phy-cells = <0>; + }; + + usb2-3 { + nvidia,function = "xusb"; + #phy-cells = <0>; + }; + }; + }; + + hsic { + clocks = <&tegra_car TEGRA210_CLK_HSIC_TRK>; + clock-names = "trk"; + status = "disabled"; + + lanes { + hsic-0 { + status = "disabled"; + #phy-cells = <0>; + }; + + hsic-1 { + status = "disabled"; + #phy-cells = <0>; + }; + }; + }; + + pcie { + clocks = <&tegra_car TEGRA210_CLK_PLL_E>; + clock-names = "pll"; + resets = <&tegra_car 205>; + reset-names = "phy"; + + lanes { + pcie-0 { + nvidia,function = "pcie-x1"; + #phy-cells = <0>; + }; + + pcie-1 { + nvidia,function = "pcie-x4"; + #phy-cells = <0>; + }; + + pcie-2 { + nvidia,function = "pcie-x4"; + #phy-cells = <0>; + }; + + pcie-3 { + nvidia,function = "pcie-x4"; + #phy-cells = <0>; + }; + + pcie-4 { + nvidia,function = "pcie-x4"; + #phy-cells = <0>; + }; + + pcie-5 { + nvidia,function = "usb3-ss"; + #phy-cells = <0>; + }; + + pcie-6 { + nvidia,function = "usb3-ss"; + #phy-cells = <0>; + }; + }; + }; + + sata { + clocks = <&tegra_car TEGRA210_CLK_PLL_E>; + clock-names = "pll"; + resets = <&tegra_car 204>; + reset-names = "phy"; + + lanes { + sata-0 { + nvidia,function = "sata"; + #phy-cells = <0>; + }; + }; + }; + }; + + ports { + usb2-0 { + mode = "peripheral"; + usb-role-switch; + + connector { + compatible = "gpio-usb-b-connector", + "usb-b-connector"; + label = "micro-USB"; + type = "micro"; + vbus-gpios = <&gpio TEGRA_GPIO(CC, 4) GPIO_ACTIVE_LOW>; + }; + }; + + usb2-1 { + vbus-supply = <&vdd_5v0_rtl>; + mode = "host"; + }; + + usb2-2 { + vbus-supply = <&vdd_usb_vbus>; + mode = "host"; + }; + + usb2-3 { + mode = "host"; + }; + + hsic-0 { + status = "disabled"; + }; + + hsic-1 { + status = "disabled"; + }; + + usb3-0 { + nvidia,usb2-companion = <1>; + }; + + usb3-1 { + nvidia,usb2-companion = <2>; + }; + + usb3-2 { + status = "disabled"; + }; + + usb3-3 { + status = "disabled"; + }; + }; + }; diff --git a/dts/Bindings/phy/phy-cadence-sierra.yaml b/dts/Bindings/phy/phy-cadence-sierra.yaml index 6a09472740..37f028f7a0 100644 --- a/dts/Bindings/phy/phy-cadence-sierra.yaml +++ b/dts/Bindings/phy/phy-cadence-sierra.yaml @@ -1,8 +1,8 @@ # SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) %YAML 1.2 --- -$id: "http://devicetree.org/schemas/phy/phy-cadence-sierra.yaml#" -$schema: "http://devicetree.org/meta-schemas/core.yaml#" +$id: http://devicetree.org/schemas/phy/phy-cadence-sierra.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# title: Cadence Sierra PHY @@ -61,14 +61,6 @@ properties: - const: pll0_refclk - const: pll1_refclk - assigned-clocks: - minItems: 1 - maxItems: 2 - - assigned-clock-parents: - minItems: 1 - maxItems: 2 - cdns,autoconf: type: boolean description: diff --git a/dts/Bindings/phy/phy-cadence-torrent.yaml b/dts/Bindings/phy/phy-cadence-torrent.yaml index 2ad1faadda..15dc8efe6f 100644 --- a/dts/Bindings/phy/phy-cadence-torrent.yaml +++ b/dts/Bindings/phy/phy-cadence-torrent.yaml @@ -1,8 +1,8 @@ # SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) %YAML 1.2 --- -$id: "http://devicetree.org/schemas/phy/phy-cadence-torrent.yaml#" -$schema: "http://devicetree.org/meta-schemas/core.yaml#" +$id: http://devicetree.org/schemas/phy/phy-cadence-torrent.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# title: Cadence Torrent SD0801 PHY @@ -20,6 +20,7 @@ properties: compatible: enum: - cdns,torrent-phy + - ti,j7200-serdes-10g - ti,j721e-serdes-10g '#address-cells': @@ -35,20 +36,18 @@ properties: minItems: 1 maxItems: 2 description: - PHY reference clock for 1 item. Must contain an entry in clock-names. - Optional Parent to enable output reference clock. + PHY input reference clocks - refclk (for PLL0) & pll1_refclk (for PLL1). + pll1_refclk is optional and used for multi-protocol configurations requiring + separate reference clock for each protocol. + Same refclk is used for both PLL0 and PLL1 if no separate pll1_refclk is used. + Optional parent clock (phy_en_refclk) to enable a reference clock output feature + on some platforms to output either derived or received reference clock. clock-names: minItems: 1 items: - const: refclk - - const: phy_en_refclk - - assigned-clocks: - maxItems: 3 - - assigned-clock-parents: - maxItems: 3 + - enum: [ pll1_refclk, phy_en_refclk ] reg: minItems: 1 diff --git a/dts/Bindings/phy/phy-hisi-inno-usb2.txt b/dts/Bindings/phy/phy-hisi-inno-usb2.txt index 0d70c83410..104953e849 100644 --- a/dts/Bindings/phy/phy-hisi-inno-usb2.txt +++ b/dts/Bindings/phy/phy-hisi-inno-usb2.txt @@ -14,7 +14,7 @@ Required properties: - #size-cells: Must be 0. The INNO USB2 PHY device should be a child node of peripheral controller that -contains the PHY configuration register, and each device suppports up to 2 PHY +contains the PHY configuration register, and each device supports up to 2 PHY ports which are represented as child nodes of INNO USB2 PHY device. Required properties for PHY port node: diff --git a/dts/Bindings/phy/phy-rockchip-naneng-combphy.yaml b/dts/Bindings/phy/phy-rockchip-naneng-combphy.yaml index 8d8698412d..d3cd799787 100644 --- a/dts/Bindings/phy/phy-rockchip-naneng-combphy.yaml +++ b/dts/Bindings/phy/phy-rockchip-naneng-combphy.yaml @@ -13,6 +13,7 @@ properties: compatible: enum: - rockchip,rk3568-naneng-combphy + - rockchip,rk3588-naneng-combphy reg: maxItems: 1 @@ -30,8 +31,14 @@ properties: - const: pipe resets: + minItems: 1 + maxItems: 2 + + reset-names: + minItems: 1 items: - - description: exclusive PHY reset line + - const: phy + - const: apb rockchip,enable-ssc: type: boolean @@ -77,6 +84,32 @@ required: - rockchip,pipe-phy-grf - "#phy-cells" +allOf: + - if: + properties: + compatible: + contains: + const: rockchip,rk3568-naneng-combphy + then: + properties: + resets: + maxItems: 1 + reset-names: + maxItems: 1 + - if: + properties: + compatible: + contains: + const: rockchip,rk3588-naneng-combphy + then: + properties: + resets: + minItems: 2 + reset-names: + minItems: 2 + required: + - reset-names + additionalProperties: false examples: diff --git a/dts/Bindings/phy/phy-stih407-usb.txt b/dts/Bindings/phy/phy-stih407-usb.txt deleted file mode 100644 index 35f03df001..0000000000 --- a/dts/Bindings/phy/phy-stih407-usb.txt +++ /dev/null @@ -1,24 +0,0 @@ -ST STiH407 USB PHY controller - -This file documents the dt bindings for the usb picoPHY driver which is the PHY for both USB2 and USB3 -host controllers (when controlling usb2/1.1 devices) available on STiH407 SoC family from STMicroelectronics. - -Required properties: -- compatible : should be "st,stih407-usb2-phy" -- st,syscfg : phandle of sysconfig bank plus integer array containing phyparam and phyctrl register offsets -- resets : list of phandle and reset specifier pairs. There should be two entries, one - for the whole phy and one for the port -- reset-names : list of reset signal names. Should be "global" and "port" -See: Documentation/devicetree/bindings/reset/st,stih407-powerdown.yaml -See: Documentation/devicetree/bindings/reset/reset.txt - -Example: - -usb2_picophy0: usbpicophy@f8 { - compatible = "st,stih407-usb2-phy"; - #phy-cells = <0>; - st,syscfg = <&syscfg_core 0x100 0xf4>; - resets = <&softreset STIH407_PICOPHY_SOFTRESET>, - <&picophyreset STIH407_PICOPHY0_RESET>; - reset-names = "global", "port"; -}; diff --git a/dts/Bindings/phy/phy-stm32-usbphyc.yaml b/dts/Bindings/phy/phy-stm32-usbphyc.yaml index 5b4c915cc9..24a3dbde22 100644 --- a/dts/Bindings/phy/phy-stm32-usbphyc.yaml +++ b/dts/Bindings/phy/phy-stm32-usbphyc.yaml @@ -55,7 +55,7 @@ properties: description: number of clock cells for ck_usbo_48m consumer const: 0 -#Required child nodes: +# Required child nodes: patternProperties: "^usb-phy@[0|1]$": diff --git a/dts/Bindings/phy/phy-tegra194-p2u.yaml b/dts/Bindings/phy/phy-tegra194-p2u.yaml index 445b2467f4..4790c6238a 100644 --- a/dts/Bindings/phy/phy-tegra194-p2u.yaml +++ b/dts/Bindings/phy/phy-tegra194-p2u.yaml @@ -1,8 +1,8 @@ # SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) %YAML 1.2 --- -$id: "http://devicetree.org/schemas/phy/phy-tegra194-p2u.yaml#" -$schema: "http://devicetree.org/meta-schemas/core.yaml#" +$id: http://devicetree.org/schemas/phy/phy-tegra194-p2u.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# title: NVIDIA Tegra194 & Tegra234 P2U diff --git a/dts/Bindings/phy/pistachio-usb-phy.txt b/dts/Bindings/phy/pistachio-usb-phy.txt index afbc7e24a3..c7970c07ee 100644 --- a/dts/Bindings/phy/pistachio-usb-phy.txt +++ b/dts/Bindings/phy/pistachio-usb-phy.txt @@ -8,7 +8,7 @@ Required properties: - clocks: Must contain an entry for each entry in clock-names. See ../clock/clock-bindings.txt for details. - clock-names: Must include "usb_phy". - - img,cr-top: Must constain a phandle to the CR_TOP syscon node. + - img,cr-top: Must contain a phandle to the CR_TOP syscon node. - img,refclk: Indicates the reference clock source for the USB PHY. See <dt-bindings/phy/phy-pistachio-usb.h> for a list of valid values. diff --git a/dts/Bindings/phy/pxa1928-usb-phy.txt b/dts/Bindings/phy/pxa1928-usb-phy.txt deleted file mode 100644 index 660a13ca90..0000000000 --- a/dts/Bindings/phy/pxa1928-usb-phy.txt +++ /dev/null @@ -1,18 +0,0 @@ -* Marvell PXA1928 USB and HSIC PHYs - -Required properties: -- compatible: "marvell,pxa1928-usb-phy" or "marvell,pxa1928-hsic-phy" -- reg: base address and length of the registers -- clocks - A single clock. From common clock binding. -- #phys-cells: should be 0. From commmon phy binding. -- resets: reference to the reset controller - -Example: - - usbphy: phy@7000 { - compatible = "marvell,pxa1928-usb-phy"; - reg = <0x7000 0xe0>; - clocks = <&apmu_clocks PXA1928_CLK_USB>; - #phy-cells = <0>; - }; - diff --git a/dts/Bindings/phy/qcom,edp-phy.yaml b/dts/Bindings/phy/qcom,edp-phy.yaml index 1e104ae76e..6566353f1a 100644 --- a/dts/Bindings/phy/qcom,edp-phy.yaml +++ b/dts/Bindings/phy/qcom,edp-phy.yaml @@ -2,8 +2,8 @@ %YAML 1.2 --- -$id: "http://devicetree.org/schemas/phy/qcom,edp-phy.yaml#" -$schema: "http://devicetree.org/meta-schemas/core.yaml#" +$id: http://devicetree.org/schemas/phy/qcom,edp-phy.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# title: Qualcomm eDP PHY @@ -43,6 +43,9 @@ properties: "#phy-cells": const: 0 + power-domains: + maxItems: 1 + vdda-phy-supply: true vdda-pll-supply: true diff --git a/dts/Bindings/phy/qcom,hdmi-phy-other.yaml b/dts/Bindings/phy/qcom,hdmi-phy-other.yaml index fdb277edeb..0c8f03b786 100644 --- a/dts/Bindings/phy/qcom,hdmi-phy-other.yaml +++ b/dts/Bindings/phy/qcom,hdmi-phy-other.yaml @@ -43,6 +43,9 @@ properties: vddio-supply: description: phandle to VDD I/O supply regulator + '#clock-cells': + const: 0 + '#phy-cells': const: 0 @@ -53,7 +56,6 @@ allOf: contains: enum: - qcom,hdmi-phy-8660 - - qcom,hdmi-phy-8960 then: properties: clocks: @@ -68,6 +70,24 @@ allOf: compatible: contains: enum: + - qcom,hdmi-phy-8960 + then: + properties: + clocks: + minItems: 1 + maxItems: 2 + clock-names: + minItems: 1 + items: + - const: slave_iface + - const: pxo + vddio-supply: false + + - if: + properties: + compatible: + contains: + enum: - qcom,hdmi-phy-8084 - qcom,hdmi-phy-8974 then: @@ -96,9 +116,10 @@ examples: "hdmi_pll"; reg = <0x4a00400 0x60>, <0x4a00500 0x100>; + #clock-cells = <0>; #phy-cells = <0>; power-domains = <&mmcc 1>; - clock-names = "slave_iface"; - clocks = <&clk 21>; + clock-names = "slave_iface", "pxo"; + clocks = <&clk 21>, <&pxo_board>; core-vdda-supply = <&pm8921_hdmi_mvs>; }; diff --git a/dts/Bindings/phy/qcom,ipq5332-usb-hsphy.yaml b/dts/Bindings/phy/qcom,ipq5332-usb-hsphy.yaml new file mode 100644 index 0000000000..e77576d06c --- /dev/null +++ b/dts/Bindings/phy/qcom,ipq5332-usb-hsphy.yaml @@ -0,0 +1,61 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/phy/qcom,ipq5332-usb-hsphy.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: M31 USB PHY + +maintainers: + - Sricharan Ramabadhran <quic_srichara@quicinc.com> + - Varadarajan Narayanan <quic_varada@quicinc.com> + +description: + USB M31 PHY (https://www.m31tech.com) found in Qualcomm + IPQ5018, IPQ5332 SoCs. + +properties: + compatible: + items: + - enum: + - qcom,ipq5018-usb-hsphy + - qcom,ipq5332-usb-hsphy + + "#phy-cells": + const: 0 + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + + clock-names: + items: + - const: cfg_ahb + + resets: + maxItems: 1 + + vdd-supply: + description: + Phandle to 5V regulator supply to PHY digital circuit. + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/qcom,ipq5332-gcc.h> + usb-phy@7b000 { + compatible = "qcom,ipq5332-usb-hsphy"; + reg = <0x0007b000 0x12c>; + + clocks = <&gcc GCC_USB0_PHY_CFG_AHB_CLK>; + clock-names = "cfg_ahb"; + + #phy-cells = <0>; + + resets = <&gcc GCC_QUSB2_0_PHY_BCR>; + + vdd-supply = <®ulator_fixed_5p0>; + }; diff --git a/dts/Bindings/phy/qcom,ipq8074-qmp-pcie-phy.yaml b/dts/Bindings/phy/qcom,ipq8074-qmp-pcie-phy.yaml index 62045dcfb2..634cec5d57 100644 --- a/dts/Bindings/phy/qcom,ipq8074-qmp-pcie-phy.yaml +++ b/dts/Bindings/phy/qcom,ipq8074-qmp-pcie-phy.yaml @@ -13,287 +13,79 @@ description: QMP PHY controller supports physical layer functionality for a number of controllers on Qualcomm chipsets, such as, PCIe, UFS, and USB. - Note that these bindings are for SoCs up to SC8180X. For newer SoCs, see - qcom,sc8280xp-qmp-pcie-phy.yaml. - properties: compatible: enum: - qcom,ipq6018-qmp-pcie-phy - qcom,ipq8074-qmp-gen3-pcie-phy - qcom,ipq8074-qmp-pcie-phy - - qcom,msm8998-qmp-pcie-phy - - qcom,sc8180x-qmp-pcie-phy - - qcom,sdm845-qhp-pcie-phy - - qcom,sdm845-qmp-pcie-phy - - qcom,sdx55-qmp-pcie-phy - - qcom,sm8250-qmp-gen3x1-pcie-phy - - qcom,sm8250-qmp-gen3x2-pcie-phy - - qcom,sm8250-qmp-modem-pcie-phy - - qcom,sm8450-qmp-gen3x1-pcie-phy - - qcom,sm8450-qmp-gen4x2-pcie-phy reg: items: - description: serdes - "#address-cells": - enum: [ 1, 2 ] - - "#size-cells": - enum: [ 1, 2 ] - - ranges: true - clocks: - minItems: 2 - maxItems: 4 + maxItems: 3 clock-names: - minItems: 2 - maxItems: 4 + items: + - const: aux + - const: cfg_ahb + - const: pipe resets: - minItems: 1 maxItems: 2 reset-names: - minItems: 1 - maxItems: 2 - - vdda-phy-supply: true - - vdda-pll-supply: true - - vddp-ref-clk-supply: true - -patternProperties: - "^phy@[0-9a-f]+$": - type: object - description: single PHY-provider child node - properties: - reg: - minItems: 3 - maxItems: 6 - - clocks: - items: - - description: PIPE clock - - clock-names: - deprecated: true - items: - - const: pipe0 - - "#clock-cells": - const: 0 - - clock-output-names: - maxItems: 1 + items: + - const: phy + - const: common - "#phy-cells": - const: 0 + "#clock-cells": + const: 0 - required: - - reg - - clocks - - "#clock-cells" - - clock-output-names - - "#phy-cells" + clock-output-names: + maxItems: 1 - additionalProperties: false + "#phy-cells": + const: 0 required: - compatible - reg - - "#address-cells" - - "#size-cells" - - ranges - clocks - clock-names - resets - reset-names + - "#clock-cells" + - clock-output-names + - "#phy-cells" additionalProperties: false -allOf: - - if: - properties: - compatible: - contains: - enum: - - qcom,msm8998-qmp-pcie-phy - then: - properties: - clocks: - maxItems: 3 - clock-names: - items: - - const: aux - - const: cfg_ahb - - const: ref - resets: - maxItems: 2 - reset-names: - items: - - const: phy - - const: common - required: - - vdda-phy-supply - - vdda-pll-supply - - - if: - properties: - compatible: - contains: - enum: - - qcom,ipq6018-qmp-pcie-phy - - qcom,ipq8074-qmp-gen3-pcie-phy - - qcom,ipq8074-qmp-pcie-phy - then: - properties: - clocks: - maxItems: 2 - clock-names: - items: - - const: aux - - const: cfg_ahb - resets: - maxItems: 2 - reset-names: - items: - - const: phy - - const: common - - - if: - properties: - compatible: - contains: - enum: - - qcom,sc8180x-qmp-pcie-phy - - qcom,sdm845-qhp-pcie-phy - - qcom,sdm845-qmp-pcie-phy - - qcom,sdx55-qmp-pcie-phy - - qcom,sm8250-qmp-gen3x1-pcie-phy - - qcom,sm8250-qmp-gen3x2-pcie-phy - - qcom,sm8250-qmp-modem-pcie-phy - - qcom,sm8450-qmp-gen3x1-pcie-phy - - qcom,sm8450-qmp-gen4x2-pcie-phy - then: - properties: - clocks: - maxItems: 4 - clock-names: - items: - - const: aux - - const: cfg_ahb - - const: ref - - const: refgen - resets: - maxItems: 1 - reset-names: - items: - - const: phy - required: - - vdda-phy-supply - - vdda-pll-supply - - - if: - properties: - compatible: - contains: - enum: - - qcom,sm8250-qmp-gen3x2-pcie-phy - - qcom,sm8250-qmp-modem-pcie-phy - - qcom,sm8450-qmp-gen4x2-pcie-phy - then: - patternProperties: - "^phy@[0-9a-f]+$": - properties: - reg: - items: - - description: TX lane 1 - - description: RX lane 1 - - description: PCS - - description: TX lane 2 - - description: RX lane 2 - - description: PCS_MISC - - - if: - properties: - compatible: - contains: - enum: - - qcom,sc8180x-qmp-pcie-phy - - qcom,sdm845-qmp-pcie-phy - - qcom,sdx55-qmp-pcie-phy - - qcom,sm8250-qmp-gen3x1-pcie-phy - - qcom,sm8450-qmp-gen3x1-pcie-phy - then: - patternProperties: - "^phy@[0-9a-f]+$": - properties: - reg: - items: - - description: TX - - description: RX - - description: PCS - - description: PCS_MISC - - - if: - properties: - compatible: - contains: - enum: - - qcom,ipq6018-qmp-pcie-phy - - qcom,ipq8074-qmp-pcie-phy - - qcom,msm8998-qmp-pcie-phy - - qcom,sdm845-qhp-pcie-phy - then: - patternProperties: - "^phy@[0-9a-f]+$": - properties: - reg: - items: - - description: TX - - description: RX - - description: PCS - examples: - | - #include <dt-bindings/clock/qcom,gcc-sm8250.h> - phy-wrapper@1c0e000 { - compatible = "qcom,sm8250-qmp-gen3x2-pcie-phy"; - reg = <0x01c0e000 0x1c0>; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0x0 0x01c0e000 0x1000>; - - clocks = <&gcc GCC_PCIE_PHY_AUX_CLK>, - <&gcc GCC_PCIE_1_CFG_AHB_CLK>, - <&gcc GCC_PCIE_WIGIG_CLKREF_EN>, - <&gcc GCC_PCIE1_PHY_REFGEN_CLK>; - clock-names = "aux", "cfg_ahb", "ref", "refgen"; - - resets = <&gcc GCC_PCIE_1_PHY_BCR>; - reset-names = "phy"; + #include <dt-bindings/clock/qcom,gcc-ipq6018.h> + #include <dt-bindings/reset/qcom,gcc-ipq6018.h> - vdda-phy-supply = <&vreg_l10c_0p88>; - vdda-pll-supply = <&vreg_l6b_1p2>; + phy@84000 { + compatible = "qcom,ipq6018-qmp-pcie-phy"; + reg = <0x00084000 0x1000>; - phy@200 { - reg = <0x200 0x170>, - <0x400 0x200>, - <0xa00 0x1f0>, - <0x600 0x170>, - <0x800 0x200>, - <0xe00 0xf4>; + clocks = <&gcc GCC_PCIE0_AUX_CLK>, + <&gcc GCC_PCIE0_AHB_CLK>, + <&gcc GCC_PCIE0_PIPE_CLK>; + clock-names = "aux", + "cfg_ahb", + "pipe"; - clocks = <&gcc GCC_PCIE_1_PIPE_CLK>; + clock-output-names = "gcc_pcie0_pipe_clk_src"; + #clock-cells = <0>; - #clock-cells = <0>; - clock-output-names = "pcie_1_pipe_clk"; + #phy-cells = <0>; - #phy-cells = <0>; - }; + resets = <&gcc GCC_PCIE0_PHY_BCR>, + <&gcc GCC_PCIE0PHY_PHY_BCR>; + reset-names = "phy", + "common"; }; diff --git a/dts/Bindings/phy/qcom,msm8996-qmp-ufs-phy.yaml b/dts/Bindings/phy/qcom,msm8996-qmp-ufs-phy.yaml deleted file mode 100644 index be41acbd3b..0000000000 --- a/dts/Bindings/phy/qcom,msm8996-qmp-ufs-phy.yaml +++ /dev/null @@ -1,241 +0,0 @@ -# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) -%YAML 1.2 ---- -$id: http://devicetree.org/schemas/phy/qcom,msm8996-qmp-ufs-phy.yaml# -$schema: http://devicetree.org/meta-schemas/core.yaml# - -title: Qualcomm QMP PHY controller (UFS, MSM8996) - -maintainers: - - Vinod Koul <vkoul@kernel.org> - -description: - QMP PHY controller supports physical layer functionality for a number of - controllers on Qualcomm chipsets, such as, PCIe, UFS, and USB. - - Note that these bindings are for SoCs up to SC8180X. For newer SoCs, see - qcom,sc8280xp-qmp-ufs-phy.yaml. - -properties: - compatible: - enum: - - qcom,msm8996-qmp-ufs-phy - - qcom,msm8998-qmp-ufs-phy - - qcom,sc8180x-qmp-ufs-phy - - qcom,sdm845-qmp-ufs-phy - - qcom,sm6115-qmp-ufs-phy - - qcom,sm6350-qmp-ufs-phy - - qcom,sm8150-qmp-ufs-phy - - qcom,sm8250-qmp-ufs-phy - - qcom,sm8350-qmp-ufs-phy - - qcom,sm8450-qmp-ufs-phy - - reg: - items: - - description: serdes - - "#address-cells": - enum: [ 1, 2 ] - - "#size-cells": - enum: [ 1, 2 ] - - ranges: true - - clocks: - minItems: 1 - maxItems: 3 - - clock-names: - minItems: 1 - maxItems: 3 - - power-domains: - maxItems: 1 - - resets: - maxItems: 1 - - reset-names: - items: - - const: ufsphy - - vdda-phy-supply: true - - vdda-pll-supply: true - - vddp-ref-clk-supply: true - -patternProperties: - "^phy@[0-9a-f]+$": - type: object - description: single PHY-provider child node - properties: - reg: - minItems: 3 - maxItems: 6 - - "#phy-cells": - const: 0 - - required: - - reg - - "#phy-cells" - - additionalProperties: false - -required: - - compatible - - reg - - "#address-cells" - - "#size-cells" - - ranges - - clocks - - clock-names - - resets - - reset-names - - vdda-phy-supply - - vdda-pll-supply - -additionalProperties: false - -allOf: - - if: - properties: - compatible: - contains: - enum: - - qcom,msm8996-qmp-ufs-phy - then: - properties: - clocks: - maxItems: 1 - clock-names: - items: - - const: ref - - - if: - properties: - compatible: - contains: - enum: - - qcom,msm8998-qmp-ufs-phy - - qcom,sc8180x-qmp-ufs-phy - - qcom,sdm845-qmp-ufs-phy - - qcom,sm6115-qmp-ufs-phy - - qcom,sm6350-qmp-ufs-phy - - qcom,sm8150-qmp-ufs-phy - - qcom,sm8250-qmp-ufs-phy - then: - properties: - clocks: - maxItems: 2 - clock-names: - items: - - const: ref - - const: ref_aux - - - if: - properties: - compatible: - contains: - enum: - - qcom,sm8450-qmp-ufs-phy - then: - properties: - clocks: - maxItems: 3 - clock-names: - items: - - const: ref - - const: ref_aux - - const: qref - - - if: - properties: - compatible: - contains: - enum: - - qcom,msm8998-qmp-ufs-phy - - qcom,sdm845-qmp-ufs-phy - - qcom,sm6350-qmp-ufs-phy - - qcom,sm8150-qmp-ufs-phy - - qcom,sm8250-qmp-ufs-phy - - qcom,sm8350-qmp-ufs-phy - - qcom,sm8450-qmp-ufs-phy - then: - patternProperties: - "^phy@[0-9a-f]+$": - properties: - reg: - items: - - description: TX lane 1 - - description: RX lane 1 - - description: PCS - - description: TX lane 2 - - description: RX lane 2 - - - if: - properties: - compatible: - contains: - enum: - - qcom,sc8180x-qmp-ufs-phy - then: - patternProperties: - "^phy@[0-9a-f]+$": - properties: - reg: - items: - - description: TX - - description: RX - - description: PCS - - description: PCS_MISC - - - if: - properties: - compatible: - contains: - enum: - - qcom,msm8996-qmp-ufs-phy - - qcom,sm6115-qmp-ufs-phy - then: - patternProperties: - "^phy@[0-9a-f]+$": - properties: - reg: - items: - - description: TX - - description: RX - - description: PCS - -examples: - - | - #include <dt-bindings/clock/qcom,gcc-sm8250.h> - #include <dt-bindings/clock/qcom,rpmh.h> - - phy-wrapper@1d87000 { - compatible = "qcom,sm8250-qmp-ufs-phy"; - reg = <0x01d87000 0x1c0>; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0x0 0x01d87000 0x1000>; - - clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GCC_UFS_PHY_PHY_AUX_CLK>; - clock-names = "ref", "ref_aux"; - - resets = <&ufs_mem_hc 0>; - reset-names = "ufsphy"; - - vdda-phy-supply = <&vreg_l6b>; - vdda-pll-supply = <&vreg_l3b>; - - phy@400 { - reg = <0x400 0x108>, - <0x600 0x1e0>, - <0xc00 0x1dc>, - <0x800 0x108>, - <0xa00 0x1e0>; - #phy-cells = <0>; - }; - }; diff --git a/dts/Bindings/phy/qcom,msm8996-qmp-usb3-phy.yaml b/dts/Bindings/phy/qcom,msm8996-qmp-usb3-phy.yaml deleted file mode 100644 index 0c6b3ba734..0000000000 --- a/dts/Bindings/phy/qcom,msm8996-qmp-usb3-phy.yaml +++ /dev/null @@ -1,391 +0,0 @@ -# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) -%YAML 1.2 ---- -$id: http://devicetree.org/schemas/phy/qcom,msm8996-qmp-usb3-phy.yaml# -$schema: http://devicetree.org/meta-schemas/core.yaml# - -title: Qualcomm QMP PHY controller (USB, MSM8996) - -maintainers: - - Vinod Koul <vkoul@kernel.org> - -description: - QMP PHY controller supports physical layer functionality for a number of - controllers on Qualcomm chipsets, such as, PCIe, UFS, and USB. - - Note that these bindings are for SoCs up to SC8180X. For newer SoCs, see - qcom,sc8280xp-qmp-usb3-uni-phy.yaml. - -properties: - compatible: - enum: - - qcom,ipq6018-qmp-usb3-phy - - qcom,ipq8074-qmp-usb3-phy - - qcom,msm8996-qmp-usb3-phy - - qcom,msm8998-qmp-usb3-phy - - qcom,qcm2290-qmp-usb3-phy - - qcom,sc7180-qmp-usb3-phy - - qcom,sc8180x-qmp-usb3-phy - - qcom,sdm845-qmp-usb3-phy - - qcom,sdm845-qmp-usb3-uni-phy - - qcom,sdx55-qmp-usb3-uni-phy - - qcom,sdx65-qmp-usb3-uni-phy - - qcom,sm8150-qmp-usb3-phy - - qcom,sm8150-qmp-usb3-uni-phy - - qcom,sm8250-qmp-usb3-phy - - qcom,sm8250-qmp-usb3-uni-phy - - qcom,sm8350-qmp-usb3-phy - - qcom,sm8350-qmp-usb3-uni-phy - - qcom,sm8450-qmp-usb3-phy - - reg: - minItems: 1 - items: - - description: serdes - - description: DP_COM - - "#address-cells": - enum: [ 1, 2 ] - - "#size-cells": - enum: [ 1, 2 ] - - ranges: true - - clocks: - minItems: 3 - maxItems: 4 - - clock-names: - minItems: 3 - maxItems: 4 - - power-domains: - maxItems: 1 - - resets: - maxItems: 2 - - reset-names: - maxItems: 2 - - vdda-phy-supply: true - - vdda-pll-supply: true - - vddp-ref-clk-supply: true - -patternProperties: - "^phy@[0-9a-f]+$": - type: object - description: single PHY-provider child node - properties: - reg: - minItems: 3 - maxItems: 6 - - clocks: - items: - - description: PIPE clock - - clock-names: - deprecated: true - items: - - const: pipe0 - - "#clock-cells": - const: 0 - - clock-output-names: - maxItems: 1 - - "#phy-cells": - const: 0 - - required: - - reg - - clocks - - "#clock-cells" - - clock-output-names - - "#phy-cells" - - additionalProperties: false - -required: - - compatible - - reg - - "#address-cells" - - "#size-cells" - - ranges - - clocks - - clock-names - - resets - - reset-names - - vdda-phy-supply - - vdda-pll-supply - -additionalProperties: false - -allOf: - - if: - properties: - compatible: - contains: - enum: - - qcom,sc7180-qmp-usb3-phy - then: - properties: - clocks: - maxItems: 4 - clock-names: - items: - - const: aux - - const: cfg_ahb - - const: ref - - const: com_aux - resets: - maxItems: 1 - reset-names: - items: - - const: phy - - - if: - properties: - compatible: - contains: - enum: - - qcom,sdm845-qmp-usb3-uni-phy - then: - properties: - clocks: - maxItems: 4 - clock-names: - items: - - const: aux - - const: cfg_ahb - - const: ref - - const: com_aux - resets: - maxItems: 2 - reset-names: - items: - - const: phy - - const: common - - - if: - properties: - compatible: - contains: - enum: - - qcom,ipq8074-qmp-usb3-phy - - qcom,msm8996-qmp-usb3-phy - - qcom,msm8998-qmp-usb3-phy - - qcom,sdx55-qmp-usb3-uni-phy - - qcom,sdx65-qmp-usb3-uni-phy - then: - properties: - clocks: - maxItems: 3 - clock-names: - items: - - const: aux - - const: cfg_ahb - - const: ref - resets: - maxItems: 2 - reset-names: - items: - - const: phy - - const: common - - - if: - properties: - compatible: - contains: - enum: - - qcom,sm8150-qmp-usb3-phy - - qcom,sm8150-qmp-usb3-uni-phy - - qcom,sm8250-qmp-usb3-uni-phy - - qcom,sm8350-qmp-usb3-uni-phy - then: - properties: - clocks: - maxItems: 4 - clock-names: - items: - - const: aux - - const: ref_clk_src - - const: ref - - const: com_aux - resets: - maxItems: 2 - reset-names: - items: - - const: phy - - const: common - - - if: - properties: - compatible: - contains: - enum: - - qcom,sm8250-qmp-usb3-phy - - qcom,sm8350-qmp-usb3-phy - then: - properties: - clocks: - maxItems: 3 - clock-names: - items: - - const: aux - - const: ref_clk_src - - const: com_aux - resets: - maxItems: 2 - reset-names: - items: - - const: phy - - const: common - - - if: - properties: - compatible: - contains: - enum: - - qcom,qcm2290-qmp-usb3-phy - then: - properties: - clocks: - maxItems: 3 - clock-names: - items: - - const: cfg_ahb - - const: ref - - const: com_aux - resets: - maxItems: 2 - reset-names: - items: - - const: phy_phy - - const: phy - - - if: - properties: - compatible: - contains: - enum: - - qcom,sdm845-qmp-usb3-phy - - qcom,sm8150-qmp-usb3-phy - - qcom,sm8350-qmp-usb3-phy - - qcom,sm8450-qmp-usb3-phy - then: - patternProperties: - "^phy@[0-9a-f]+$": - properties: - reg: - items: - - description: TX lane 1 - - description: RX lane 1 - - description: PCS - - description: TX lane 2 - - description: RX lane 2 - - description: PCS_MISC - - - if: - properties: - compatible: - contains: - enum: - - qcom,msm8998-qmp-usb3-phy - then: - patternProperties: - "^phy@[0-9a-f]+$": - properties: - reg: - items: - - description: TX lane 1 - - description: RX lane 1 - - description: PCS - - description: TX lane 2 - - description: RX lane 2 - - - if: - properties: - compatible: - contains: - enum: - - qcom,ipq6018-qmp-usb3-phy - - qcom,ipq8074-qmp-usb3-phy - - qcom,qcm2290-qmp-usb3-phy - - qcom,sc7180-qmp-usb3-phy - - qcom,sc8180x-qmp-usb3-phy - - qcom,sdx55-qmp-usb3-uni-phy - - qcom,sdx65-qmp-usb3-uni-phy - - qcom,sm8150-qmp-usb3-uni-phy - - qcom,sm8250-qmp-usb3-phy - then: - patternProperties: - "^phy@[0-9a-f]+$": - properties: - reg: - items: - - description: TX - - description: RX - - description: PCS - - description: PCS_MISC - - - if: - properties: - compatible: - contains: - enum: - - qcom,msm8996-qmp-usb3-phy - - qcom,sm8250-qmp-usb3-uni-phy - - qcom,sm8350-qmp-usb3-uni-phy - then: - patternProperties: - "^phy@[0-9a-f]+$": - properties: - reg: - items: - - description: TX - - description: RX - - description: PCS - -examples: - - | - #include <dt-bindings/clock/qcom,gcc-sdm845.h> - usb_2_qmpphy: phy-wrapper@88eb000 { - compatible = "qcom,sdm845-qmp-usb3-uni-phy"; - reg = <0x088eb000 0x18c>; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0x0 0x088eb000 0x2000>; - - clocks = <&gcc GCC_USB3_SEC_PHY_AUX_CLK >, - <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>, - <&gcc GCC_USB3_SEC_CLKREF_CLK>, - <&gcc GCC_USB3_SEC_PHY_COM_AUX_CLK>; - clock-names = "aux", "cfg_ahb", "ref", "com_aux"; - - resets = <&gcc GCC_USB3PHY_PHY_SEC_BCR>, - <&gcc GCC_USB3_PHY_SEC_BCR>; - reset-names = "phy", "common"; - - vdda-phy-supply = <&vdda_usb2_ss_1p2>; - vdda-pll-supply = <&vdda_usb2_ss_core>; - - usb_2_ssphy: phy@200 { - reg = <0x200 0x128>, - <0x400 0x1fc>, - <0x800 0x218>, - <0x600 0x70>; - - clocks = <&gcc GCC_USB3_SEC_PHY_PIPE_CLK>; - - #clock-cells = <0>; - clock-output-names = "usb3_uni_phy_pipe_clk_src"; - - #phy-cells = <0>; - }; - }; diff --git a/dts/Bindings/phy/qcom,msm8998-qmp-pcie-phy.yaml b/dts/Bindings/phy/qcom,msm8998-qmp-pcie-phy.yaml new file mode 100644 index 0000000000..d05eef0e1c --- /dev/null +++ b/dts/Bindings/phy/qcom,msm8998-qmp-pcie-phy.yaml @@ -0,0 +1,97 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/phy/qcom,msm8998-qmp-pcie-phy.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm QMP PHY controller (PCIe, MSM8998) + +maintainers: + - Vinod Koul <vkoul@kernel.org> + +description: + The QMP PHY controller supports physical layer functionality for a number of + controllers on Qualcomm chipsets, such as, PCIe, UFS, and USB. + +properties: + compatible: + const: qcom,msm8998-qmp-pcie-phy + + reg: + items: + - description: serdes + + clocks: + maxItems: 4 + + clock-names: + items: + - const: aux + - const: cfg_ahb + - const: ref + - const: pipe + + resets: + maxItems: 2 + + reset-names: + items: + - const: phy + - const: common + + vdda-phy-supply: true + + vdda-pll-supply: true + + "#clock-cells": + const: 0 + + clock-output-names: + maxItems: 1 + + "#phy-cells": + const: 0 + +required: + - compatible + - reg + - clocks + - clock-names + - resets + - reset-names + - vdda-phy-supply + - vdda-pll-supply + - "#clock-cells" + - clock-output-names + - "#phy-cells" + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/qcom,gcc-msm8998.h> + + phy@1c18000 { + compatible = "qcom,msm8998-qmp-pcie-phy"; + reg = <0x01c06000 0x1000>; + + clocks = <&gcc GCC_PCIE_PHY_AUX_CLK>, + <&gcc GCC_PCIE_0_CFG_AHB_CLK>, + <&gcc GCC_PCIE_CLKREF_CLK>, + <&gcc GCC_PCIE_0_PIPE_CLK>; + clock-names = "aux", + "cfg_ahb", + "ref", + "pipe"; + + clock-output-names = "pcie_0_pipe_clk_src"; + #clock-cells = <0>; + + #phy-cells = <0>; + + resets = <&gcc GCC_PCIE_0_PHY_BCR>, <&gcc GCC_PCIE_PHY_BCR>; + reset-names = "phy", "common"; + + vdda-phy-supply = <&vreg_l1a_0p875>; + vdda-pll-supply = <&vreg_l2a_1p2>; + }; diff --git a/dts/Bindings/phy/qcom,msm8998-qmp-usb3-phy.yaml b/dts/Bindings/phy/qcom,msm8998-qmp-usb3-phy.yaml new file mode 100644 index 0000000000..f1f4e4f833 --- /dev/null +++ b/dts/Bindings/phy/qcom,msm8998-qmp-usb3-phy.yaml @@ -0,0 +1,184 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/phy/qcom,msm8998-qmp-usb3-phy.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm QMP PHY controller (USB, MSM8998) + +maintainers: + - Vinod Koul <vkoul@kernel.org> + +description: + The QMP PHY controller supports physical layer functionality for USB-C on + several Qualcomm chipsets. + +properties: + compatible: + enum: + - qcom,msm8998-qmp-usb3-phy + - qcom,qcm2290-qmp-usb3-phy + - qcom,sdm660-qmp-usb3-phy + - qcom,sm6115-qmp-usb3-phy + + reg: + maxItems: 1 + + clocks: + maxItems: 4 + + clock-names: + maxItems: 4 + + resets: + maxItems: 2 + + reset-names: + items: + - const: phy + - const: phy_phy + + vdda-phy-supply: true + + vdda-pll-supply: true + + "#clock-cells": + const: 0 + + clock-output-names: + maxItems: 1 + + "#phy-cells": + const: 0 + + orientation-switch: + description: + Flag the PHY as possible handler of USB Type-C orientation switching + type: boolean + + qcom,tcsr-reg: + $ref: /schemas/types.yaml#/definitions/phandle-array + items: + - items: + - description: phandle to TCSR hardware block + - description: offset of the VLS CLAMP register + description: Clamp register present in the TCSR + + ports: + $ref: /schemas/graph.yaml#/properties/ports + properties: + port@0: + $ref: /schemas/graph.yaml#/properties/port + description: Output endpoint of the PHY + + port@1: + $ref: /schemas/graph.yaml#/properties/port + description: Incoming endpoint from the USB controller + +required: + - compatible + - reg + - clocks + - clock-names + - resets + - reset-names + - vdda-phy-supply + - vdda-pll-supply + - "#clock-cells" + - clock-output-names + - "#phy-cells" + - qcom,tcsr-reg + +allOf: + - if: + properties: + compatible: + contains: + enum: + - qcom,msm8998-qmp-usb3-phy + - qcom,sdm660-qmp-usb3-phy + then: + properties: + clocks: + maxItems: 4 + clock-names: + items: + - const: aux + - const: ref + - const: cfg_ahb + - const: pipe + + - if: + properties: + compatible: + contains: + enum: + - qcom,qcm2290-qmp-usb3-phy + - qcom,sm6115-qmp-usb3-phy + then: + properties: + clocks: + maxItems: 4 + clock-names: + items: + - const: cfg_ahb + - const: ref + - const: com_aux + - const: pipe + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/qcom,gcc-msm8998.h> + #include <dt-bindings/clock/qcom,rpmh.h> + + phy@c010000 { + compatible = "qcom,msm8998-qmp-usb3-phy"; + reg = <0x0c010000 0x1000>; + + clocks = <&gcc GCC_USB3_PHY_AUX_CLK>, + <&gcc GCC_USB3_CLKREF_CLK>, + <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>, + <&gcc GCC_USB3_PHY_PIPE_CLK>; + clock-names = "aux", + "ref", + "cfg_ahb", + "pipe"; + clock-output-names = "usb3_phy_pipe_clk_src"; + #clock-cells = <0>; + #phy-cells = <0>; + + resets = <&gcc GCC_USB3_PHY_BCR>, + <&gcc GCC_USB3PHY_PHY_BCR>; + reset-names = "phy", + "phy_phy"; + + vdda-phy-supply = <&vreg_l1a_0p875>; + vdda-pll-supply = <&vreg_l2a_1p2>; + + orientation-switch; + + qcom,tcsr-reg = <&tcsr_regs_1 0x6b244>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + endpoint { + remote-endpoint = <&pmic_typec_mux_in>; + }; + }; + + port@1 { + reg = <1>; + + endpoint { + remote-endpoint = <&usb_dwc3_ss>; + }; + }; + }; + }; diff --git a/dts/Bindings/phy/qcom,pcie2-phy.yaml b/dts/Bindings/phy/qcom,pcie2-phy.yaml new file mode 100644 index 0000000000..dbc4a4c71f --- /dev/null +++ b/dts/Bindings/phy/qcom,pcie2-phy.yaml @@ -0,0 +1,86 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/phy/qcom,pcie2-phy.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm PCIe2 PHY controller + +maintainers: + - Vinod Koul <vkoul@kernel.org> + +description: + The Qualcomm PCIe2 PHY is a Synopsys based phy found in a number of Qualcomm + platforms. + +properties: + compatible: + items: + - const: qcom,qcs404-pcie2-phy + - const: qcom,pcie2-phy + + reg: + items: + - description: PHY register set + + clocks: + items: + - description: a clock-specifier pair for the "pipe" clock + + clock-output-names: + maxItems: 1 + + "#clock-cells": + const: 0 + + "#phy-cells": + const: 0 + + vdda-vp-supply: + description: low voltage regulator + + vdda-vph-supply: + description: high voltage regulator + + resets: + maxItems: 2 + + reset-names: + items: + - const: phy + - const: pipe + +required: + - compatible + - reg + - clocks + - clock-output-names + - "#clock-cells" + - "#phy-cells" + - vdda-vp-supply + - vdda-vph-supply + - resets + - reset-names + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/qcom,gcc-qcs404.h> + phy@7786000 { + compatible = "qcom,qcs404-pcie2-phy", "qcom,pcie2-phy"; + reg = <0x07786000 0xb8>; + + clocks = <&gcc GCC_PCIE_0_PIPE_CLK>; + resets = <&gcc GCC_PCIEPHY_0_PHY_BCR>, + <&gcc GCC_PCIE_0_PIPE_ARES>; + reset-names = "phy", "pipe"; + + vdda-vp-supply = <&vreg_l3_1p05>; + vdda-vph-supply = <&vreg_l5_1p8>; + + clock-output-names = "pcie_0_pipe_clk"; + #clock-cells = <0>; + #phy-cells = <0>; + }; +... diff --git a/dts/Bindings/phy/qcom,qusb2-phy.yaml b/dts/Bindings/phy/qcom,qusb2-phy.yaml index 636ea430fb..95eecbaef0 100644 --- a/dts/Bindings/phy/qcom,qusb2-phy.yaml +++ b/dts/Bindings/phy/qcom,qusb2-phy.yaml @@ -2,8 +2,8 @@ %YAML 1.2 --- -$id: "http://devicetree.org/schemas/phy/qcom,qusb2-phy.yaml#" -$schema: "http://devicetree.org/meta-schemas/core.yaml#" +$id: http://devicetree.org/schemas/phy/qcom,qusb2-phy.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# title: Qualcomm QUSB2 phy controller @@ -18,13 +18,14 @@ properties: oneOf: - items: - enum: + - qcom,ipq6018-qusb2-phy - qcom,ipq8074-qusb2-phy + - qcom,ipq9574-qusb2-phy - qcom,msm8953-qusb2-phy - qcom,msm8996-qusb2-phy - qcom,msm8998-qusb2-phy - qcom,qcm2290-qusb2-phy - qcom,sdm660-qusb2-phy - - qcom,ipq6018-qusb2-phy - qcom,sm4250-qusb2-phy - qcom,sm6115-qusb2-phy - items: @@ -82,81 +83,74 @@ properties: Phandle to TCSR syscon register region. $ref: /schemas/types.yaml#/definitions/phandle -if: - properties: - compatible: - contains: - const: qcom,qusb2-v2-phy -then: - properties: - qcom,imp-res-offset-value: - description: - It is a 6 bit value that specifies offset to be - added to PHY refgen RESCODE via IMP_CTRL1 register. It is a PHY - tuning parameter that may vary for different boards of same SOC. - $ref: /schemas/types.yaml#/definitions/uint32 - minimum: 0 - maximum: 63 - default: 0 - - qcom,bias-ctrl-value: - description: - It is a 6 bit value that specifies bias-ctrl-value. It is a PHY - tuning parameter that may vary for different boards of same SOC. - $ref: /schemas/types.yaml#/definitions/uint32 - minimum: 0 - maximum: 63 - default: 32 - - qcom,charge-ctrl-value: - description: - It is a 2 bit value that specifies charge-ctrl-value. It is a PHY - tuning parameter that may vary for different boards of same SOC. - $ref: /schemas/types.yaml#/definitions/uint32 - minimum: 0 - maximum: 3 - default: 0 - - qcom,hstx-trim-value: - description: - It is a 4 bit value that specifies tuning for HSTX - output current. - Possible range is - 15mA to 24mA (stepsize of 600 uA). - See dt-bindings/phy/phy-qcom-qusb2.h for applicable values. - $ref: /schemas/types.yaml#/definitions/uint32 - minimum: 0 - maximum: 15 - default: 3 - - qcom,preemphasis-level: - description: - It is a 2 bit value that specifies pre-emphasis level. - Possible range is 0 to 15% (stepsize of 5%). - See dt-bindings/phy/phy-qcom-qusb2.h for applicable values. - $ref: /schemas/types.yaml#/definitions/uint32 - minimum: 0 - maximum: 3 - default: 2 - - qcom,preemphasis-width: - description: - It is a 1 bit value that specifies how long the HSTX - pre-emphasis (specified using qcom,preemphasis-level) must be in - effect. Duration could be half-bit of full-bit. - See dt-bindings/phy/phy-qcom-qusb2.h for applicable values. - $ref: /schemas/types.yaml#/definitions/uint32 - minimum: 0 - maximum: 1 - default: 0 - - qcom,hsdisc-trim-value: - description: - It is a 2 bit value tuning parameter that control disconnect - threshold and may vary for different boards of same SOC. - $ref: /schemas/types.yaml#/definitions/uint32 - minimum: 0 - maximum: 3 - default: 0 + qcom,imp-res-offset-value: + description: + It is a 6 bit value that specifies offset to be + added to PHY refgen RESCODE via IMP_CTRL1 register. It is a PHY + tuning parameter that may vary for different boards of same SOC. + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 63 + default: 0 + + qcom,bias-ctrl-value: + description: + It is a 6 bit value that specifies bias-ctrl-value. It is a PHY + tuning parameter that may vary for different boards of same SOC. + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 63 + default: 32 + + qcom,charge-ctrl-value: + description: + It is a 2 bit value that specifies charge-ctrl-value. It is a PHY + tuning parameter that may vary for different boards of same SOC. + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 3 + default: 0 + + qcom,hstx-trim-value: + description: + It is a 4 bit value that specifies tuning for HSTX + output current. + Possible range is - 15mA to 24mA (stepsize of 600 uA). + See dt-bindings/phy/phy-qcom-qusb2.h for applicable values. + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 15 + default: 3 + + qcom,preemphasis-level: + description: + It is a 2 bit value that specifies pre-emphasis level. + Possible range is 0 to 15% (stepsize of 5%). + See dt-bindings/phy/phy-qcom-qusb2.h for applicable values. + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 3 + default: 2 + + qcom,preemphasis-width: + description: + It is a 1 bit value that specifies how long the HSTX + pre-emphasis (specified using qcom,preemphasis-level) must be in + effect. Duration could be half-bit of full-bit. + See dt-bindings/phy/phy-qcom-qusb2.h for applicable values. + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 1 + default: 0 + + qcom,hsdisc-trim-value: + description: + It is a 2 bit value tuning parameter that control disconnect + threshold and may vary for different boards of same SOC. + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 3 + default: 0 required: - compatible @@ -169,6 +163,23 @@ required: - vdda-phy-dpdm-supply - resets +allOf: + - if: + not: + properties: + compatible: + contains: + const: qcom,qusb2-v2-phy + then: + properties: + qcom,imp-res-offset-value: false + qcom,bias-ctrl-value: false + qcom,charge-ctrl-value: false + qcom,hstx-trim-value: false + qcom,preemphasis-level: false + qcom,preemphasis-width: false + qcom,hsdisc-trim-value: false + additionalProperties: false examples: diff --git a/dts/Bindings/phy/qcom,sa8775p-dwmac-sgmii-phy.yaml b/dts/Bindings/phy/qcom,sa8775p-dwmac-sgmii-phy.yaml new file mode 100644 index 0000000000..b9107759b2 --- /dev/null +++ b/dts/Bindings/phy/qcom,sa8775p-dwmac-sgmii-phy.yaml @@ -0,0 +1,55 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/phy/qcom,sa8775p-dwmac-sgmii-phy.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm SerDes/SGMII ethernet PHY controller + +maintainers: + - Bartosz Golaszewski <bartosz.golaszewski@linaro.org> + +description: + The SerDes PHY sits between the MAC and the external PHY and provides + separate Rx Tx lines. + +properties: + compatible: + const: qcom,sa8775p-dwmac-sgmii-phy + + reg: + items: + - description: serdes + + clocks: + maxItems: 1 + + clock-names: + const: sgmi_ref + + phy-supply: + description: + Phandle to a regulator that provides power to the PHY. + + "#phy-cells": + const: 0 + +required: + - compatible + - reg + - "#phy-cells" + - clocks + - clock-names + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/qcom,sa8775p-gcc.h> + serdes_phy: phy@8901000 { + compatible = "qcom,sa8775p-dwmac-sgmii-phy"; + reg = <0x08901000 0xe10>; + clocks = <&gcc GCC_SGMI_CLKREF_EN>; + clock-names = "sgmi_ref"; + #phy-cells = <0>; + }; diff --git a/dts/Bindings/phy/qcom,sc7180-qmp-usb3-dp-phy.yaml b/dts/Bindings/phy/qcom,sc7180-qmp-usb3-dp-phy.yaml deleted file mode 100644 index d9d0ab90ed..0000000000 --- a/dts/Bindings/phy/qcom,sc7180-qmp-usb3-dp-phy.yaml +++ /dev/null @@ -1,219 +0,0 @@ -# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) - -%YAML 1.2 ---- -$id: http://devicetree.org/schemas/phy/qcom,sc7180-qmp-usb3-dp-phy.yaml# -$schema: http://devicetree.org/meta-schemas/core.yaml# - -title: Qualcomm QMP USB3 DP PHY controller (SC7180) - -description: - The QMP PHY controller supports physical layer functionality for a number of - controllers on Qualcomm chipsets, such as, PCIe, UFS and USB. - - Note that these bindings are for SoCs up to SC8180X. For newer SoCs, see - qcom,sc8280xp-qmp-usb43dp-phy.yaml. - -maintainers: - - Wesley Cheng <quic_wcheng@quicinc.com> - -properties: - compatible: - enum: - - qcom,sc7180-qmp-usb3-dp-phy - - qcom,sc7280-qmp-usb3-dp-phy - - qcom,sc8180x-qmp-usb3-dp-phy - - qcom,sdm845-qmp-usb3-dp-phy - - qcom,sm8250-qmp-usb3-dp-phy - reg: - items: - - description: Address and length of PHY's USB serdes block. - - description: Address and length of the DP_COM control block. - - description: Address and length of PHY's DP serdes block. - - reg-names: - items: - - const: usb - - const: dp_com - - const: dp - - "#address-cells": - enum: [ 1, 2 ] - - "#size-cells": - enum: [ 1, 2 ] - - ranges: true - - clocks: - items: - - description: Phy aux clock. - - description: Phy config clock. - - description: 19.2 MHz ref clk. - - description: Phy common block aux clock. - - clock-names: - items: - - const: aux - - const: cfg_ahb - - const: ref - - const: com_aux - - power-domains: - maxItems: 1 - - resets: - items: - - description: reset of phy block. - - description: phy common block reset. - - reset-names: - items: - - const: phy - - const: common - - vdda-phy-supply: - description: - Phandle to a regulator supply to PHY core block. - - vdda-pll-supply: - description: - Phandle to 1.8V regulator supply to PHY refclk pll block. - - vddp-ref-clk-supply: - description: - Phandle to a regulator supply to any specific refclk pll block. - -#Required nodes: -patternProperties: - "^usb3-phy@[0-9a-f]+$": - type: object - additionalProperties: false - description: - The USB3 PHY. - - properties: - reg: - items: - - description: Address and length of TX. - - description: Address and length of RX. - - description: Address and length of PCS. - - description: Address and length of TX2. - - description: Address and length of RX2. - - description: Address and length of pcs_misc. - - clocks: - items: - - description: pipe clock - - clock-names: - deprecated: true - items: - - const: pipe0 - - clock-output-names: - items: - - const: usb3_phy_pipe_clk_src - - '#clock-cells': - const: 0 - - '#phy-cells': - const: 0 - - required: - - reg - - clocks - - '#clock-cells' - - '#phy-cells' - - "^dp-phy@[0-9a-f]+$": - type: object - additionalProperties: false - description: - The DP PHY. - - properties: - reg: - items: - - description: Address and length of TX. - - description: Address and length of RX. - - description: Address and length of PCS. - - description: Address and length of TX2. - - description: Address and length of RX2. - - '#clock-cells': - const: 1 - - '#phy-cells': - const: 0 - - required: - - reg - - '#clock-cells' - - '#phy-cells' - -required: - - compatible - - reg - - "#address-cells" - - "#size-cells" - - ranges - - clocks - - clock-names - - resets - - reset-names - - vdda-phy-supply - - vdda-pll-supply - -additionalProperties: false - -examples: - - | - #include <dt-bindings/clock/qcom,gcc-sdm845.h> - usb_1_qmpphy: phy-wrapper@88e9000 { - compatible = "qcom,sdm845-qmp-usb3-dp-phy"; - reg = <0x088e9000 0x18c>, - <0x088e8000 0x10>, - <0x088ea000 0x40>; - reg-names = "usb", "dp_com", "dp"; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0x0 0x088e9000 0x2000>; - - clocks = <&gcc GCC_USB3_PRIM_PHY_AUX_CLK>, - <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>, - <&gcc GCC_USB3_PRIM_CLKREF_CLK>, - <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>; - clock-names = "aux", "cfg_ahb", "ref", "com_aux"; - - resets = <&gcc GCC_USB3_PHY_PRIM_BCR>, - <&gcc GCC_USB3_DP_PHY_PRIM_BCR>; - reset-names = "phy", "common"; - - vdda-phy-supply = <&vdda_usb2_ss_1p2>; - vdda-pll-supply = <&vdda_usb2_ss_core>; - - usb3-phy@200 { - reg = <0x200 0x128>, - <0x400 0x200>, - <0xc00 0x218>, - <0x600 0x128>, - <0x800 0x200>, - <0xa00 0x100>; - #clock-cells = <0>; - #phy-cells = <0>; - clocks = <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>; - clock-output-names = "usb3_phy_pipe_clk_src"; - }; - - dp-phy@88ea200 { - reg = <0xa200 0x200>, - <0xa400 0x200>, - <0xaa00 0x200>, - <0xa600 0x200>, - <0xa800 0x200>; - #clock-cells = <1>; - #phy-cells = <0>; - }; - }; diff --git a/dts/Bindings/phy/qcom,sc8280xp-qmp-pcie-phy.yaml b/dts/Bindings/phy/qcom,sc8280xp-qmp-pcie-phy.yaml index 80aa8d2507..ba966a78a1 100644 --- a/dts/Bindings/phy/qcom,sc8280xp-qmp-pcie-phy.yaml +++ b/dts/Bindings/phy/qcom,sc8280xp-qmp-pcie-phy.yaml @@ -16,40 +16,69 @@ description: properties: compatible: enum: + - qcom,sa8775p-qmp-gen4x2-pcie-phy + - qcom,sa8775p-qmp-gen4x4-pcie-phy + - qcom,sc8180x-qmp-pcie-phy - qcom,sc8280xp-qmp-gen3x1-pcie-phy - qcom,sc8280xp-qmp-gen3x2-pcie-phy - qcom,sc8280xp-qmp-gen3x4-pcie-phy + - qcom,sdm845-qhp-pcie-phy + - qcom,sdm845-qmp-pcie-phy + - qcom,sdx55-qmp-pcie-phy + - qcom,sdx65-qmp-gen4x2-pcie-phy + - qcom,sm8150-qmp-gen3x1-pcie-phy + - qcom,sm8150-qmp-gen3x2-pcie-phy + - qcom,sm8250-qmp-gen3x1-pcie-phy + - qcom,sm8250-qmp-gen3x2-pcie-phy + - qcom,sm8250-qmp-modem-pcie-phy + - qcom,sm8350-qmp-gen3x1-pcie-phy + - qcom,sm8450-qmp-gen3x1-pcie-phy + - qcom,sm8450-qmp-gen4x2-pcie-phy + - qcom,sm8550-qmp-gen3x2-pcie-phy + - qcom,sm8550-qmp-gen4x2-pcie-phy + - qcom,sm8650-qmp-gen3x2-pcie-phy + - qcom,sm8650-qmp-gen4x2-pcie-phy + - qcom,x1e80100-qmp-gen3x2-pcie-phy + - qcom,x1e80100-qmp-gen4x2-pcie-phy reg: minItems: 1 maxItems: 2 clocks: - maxItems: 6 + minItems: 5 + maxItems: 7 clock-names: + minItems: 5 items: - const: aux - const: cfg_ahb - const: ref - - const: rchng + - enum: [rchng, refgen] - const: pipe - const: pipediv2 + - const: phy_aux power-domains: maxItems: 1 resets: - maxItems: 1 + minItems: 1 + maxItems: 2 reset-names: + minItems: 1 items: - const: phy + - const: phy_nocsr vdda-phy-supply: true vdda-pll-supply: true + vdda-qref-supply: true + qcom,4ln-config-sel: description: PCIe 4-lane configuration $ref: /schemas/types.yaml#/definitions/phandle-array @@ -73,7 +102,6 @@ required: - reg - clocks - clock-names - - power-domains - resets - reset-names - vdda-phy-supply @@ -104,6 +132,87 @@ allOf: reg: maxItems: 1 + - if: + properties: + compatible: + contains: + enum: + - qcom,sc8180x-qmp-pcie-phy + - qcom,sdm845-qhp-pcie-phy + - qcom,sdm845-qmp-pcie-phy + - qcom,sdx55-qmp-pcie-phy + - qcom,sm8150-qmp-gen3x1-pcie-phy + - qcom,sm8150-qmp-gen3x2-pcie-phy + - qcom,sm8250-qmp-gen3x1-pcie-phy + - qcom,sm8250-qmp-gen3x2-pcie-phy + - qcom,sm8250-qmp-modem-pcie-phy + - qcom,sm8350-qmp-gen3x1-pcie-phy + - qcom,sm8450-qmp-gen3x1-pcie-phy + - qcom,sm8450-qmp-gen3x2-pcie-phy + - qcom,sm8550-qmp-gen3x2-pcie-phy + - qcom,sm8550-qmp-gen4x2-pcie-phy + - qcom,sm8650-qmp-gen3x2-pcie-phy + - qcom,sm8650-qmp-gen4x2-pcie-phy + - qcom,x1e80100-qmp-gen3x2-pcie-phy + - qcom,x1e80100-qmp-gen4x2-pcie-phy + then: + properties: + clocks: + maxItems: 5 + clock-names: + maxItems: 5 + + - if: + properties: + compatible: + contains: + enum: + - qcom,sc8280xp-qmp-gen3x1-pcie-phy + - qcom,sc8280xp-qmp-gen3x2-pcie-phy + - qcom,sc8280xp-qmp-gen3x4-pcie-phy + then: + properties: + clocks: + minItems: 6 + clock-names: + minItems: 6 + + - if: + properties: + compatible: + contains: + enum: + - qcom,sa8775p-qmp-gen4x2-pcie-phy + - qcom,sa8775p-qmp-gen4x4-pcie-phy + then: + properties: + clocks: + minItems: 7 + clock-names: + minItems: 7 + + - if: + properties: + compatible: + contains: + enum: + - qcom,sm8550-qmp-gen4x2-pcie-phy + - qcom,sm8650-qmp-gen4x2-pcie-phy + - qcom,x1e80100-qmp-gen3x2-pcie-phy + - qcom,x1e80100-qmp-gen4x2-pcie-phy + then: + properties: + resets: + minItems: 2 + reset-names: + minItems: 2 + else: + properties: + resets: + maxItems: 1 + reset-names: + maxItems: 1 + examples: - | #include <dt-bindings/clock/qcom,gcc-sc8280xp.h> diff --git a/dts/Bindings/phy/qcom,sc8280xp-qmp-ufs-phy.yaml b/dts/Bindings/phy/qcom,sc8280xp-qmp-ufs-phy.yaml index dde86a19f7..91a6cc38ff 100644 --- a/dts/Bindings/phy/qcom,sc8280xp-qmp-ufs-phy.yaml +++ b/dts/Bindings/phy/qcom,sc8280xp-qmp-ufs-phy.yaml @@ -16,18 +16,35 @@ description: properties: compatible: enum: + - qcom,msm8996-qmp-ufs-phy + - qcom,msm8998-qmp-ufs-phy + - qcom,sa8775p-qmp-ufs-phy + - qcom,sc7180-qmp-ufs-phy + - qcom,sc7280-qmp-ufs-phy + - qcom,sc8180x-qmp-ufs-phy - qcom,sc8280xp-qmp-ufs-phy + - qcom,sdm845-qmp-ufs-phy + - qcom,sm6115-qmp-ufs-phy + - qcom,sm6125-qmp-ufs-phy + - qcom,sm6350-qmp-ufs-phy + - qcom,sm7150-qmp-ufs-phy + - qcom,sm8150-qmp-ufs-phy + - qcom,sm8250-qmp-ufs-phy + - qcom,sm8350-qmp-ufs-phy + - qcom,sm8450-qmp-ufs-phy + - qcom,sm8550-qmp-ufs-phy + - qcom,sm8650-qmp-ufs-phy reg: maxItems: 1 clocks: - maxItems: 2 + minItems: 2 + maxItems: 3 clock-names: - items: - - const: ref - - const: ref_aux + minItems: 2 + maxItems: 3 power-domains: maxItems: 1 @@ -43,6 +60,9 @@ properties: vdda-pll-supply: true + "#clock-cells": + const: 1 + "#phy-cells": const: 0 @@ -58,18 +78,70 @@ required: - vdda-pll-supply - "#phy-cells" +allOf: + - if: + properties: + compatible: + contains: + enum: + - qcom,msm8998-qmp-ufs-phy + - qcom,sa8775p-qmp-ufs-phy + - qcom,sc7280-qmp-ufs-phy + - qcom,sc8180x-qmp-ufs-phy + - qcom,sc8280xp-qmp-ufs-phy + - qcom,sdm845-qmp-ufs-phy + - qcom,sm6115-qmp-ufs-phy + - qcom,sm6125-qmp-ufs-phy + - qcom,sm6350-qmp-ufs-phy + - qcom,sm7150-qmp-ufs-phy + - qcom,sm8150-qmp-ufs-phy + - qcom,sm8250-qmp-ufs-phy + - qcom,sm8350-qmp-ufs-phy + - qcom,sm8450-qmp-ufs-phy + - qcom,sm8550-qmp-ufs-phy + - qcom,sm8650-qmp-ufs-phy + then: + properties: + clocks: + minItems: 3 + maxItems: 3 + clock-names: + items: + - const: ref + - const: ref_aux + - const: qref + + - if: + properties: + compatible: + contains: + enum: + - qcom,msm8996-qmp-ufs-phy + then: + properties: + clocks: + minItems: 2 + maxItems: 2 + clock-names: + items: + - const: ref + - const: qref + additionalProperties: false examples: - | #include <dt-bindings/clock/qcom,gcc-sc8280xp.h> + #include <dt-bindings/clock/qcom,rpmh.h> ufs_mem_phy: phy@1d87000 { compatible = "qcom,sc8280xp-qmp-ufs-phy"; reg = <0x01d87000 0x1000>; - clocks = <&gcc GCC_UFS_REF_CLKREF_CLK>, <&gcc GCC_UFS_PHY_PHY_AUX_CLK>; - clock-names = "ref", "ref_aux"; + clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GCC_UFS_PHY_PHY_AUX_CLK>, + <&gcc GCC_UFS_REF_CLKREF_CLK>; + + clock-names = "ref", "ref_aux", "qref"; power-domains = <&gcc UFS_PHY_GDSC>; diff --git a/dts/Bindings/phy/qcom,sc8280xp-qmp-usb3-uni-phy.yaml b/dts/Bindings/phy/qcom,sc8280xp-qmp-usb3-uni-phy.yaml index 16fce10382..1e2d4ddc53 100644 --- a/dts/Bindings/phy/qcom,sc8280xp-qmp-usb3-uni-phy.yaml +++ b/dts/Bindings/phy/qcom,sc8280xp-qmp-usb3-uni-phy.yaml @@ -16,20 +16,32 @@ description: properties: compatible: enum: + - qcom,ipq6018-qmp-usb3-phy + - qcom,ipq8074-qmp-usb3-phy + - qcom,ipq9574-qmp-usb3-phy + - qcom,msm8996-qmp-usb3-phy + - qcom,sa8775p-qmp-usb3-uni-phy - qcom,sc8280xp-qmp-usb3-uni-phy + - qcom,sdm845-qmp-usb3-uni-phy + - qcom,sdx55-qmp-usb3-uni-phy + - qcom,sdx65-qmp-usb3-uni-phy + - qcom,sdx75-qmp-usb3-uni-phy + - qcom,sm8150-qmp-usb3-uni-phy + - qcom,sm8250-qmp-usb3-uni-phy + - qcom,sm8350-qmp-usb3-uni-phy + - qcom,x1e80100-qmp-usb3-uni-phy + reg: maxItems: 1 clocks: - maxItems: 4 + minItems: 4 + maxItems: 5 clock-names: - items: - - const: aux - - const: ref - - const: com_aux - - const: pipe + minItems: 4 + maxItems: 5 power-domains: maxItems: 1 @@ -60,7 +72,6 @@ required: - reg - clocks - clock-names - - power-domains - resets - reset-names - vdda-phy-supply @@ -69,6 +80,82 @@ required: - clock-output-names - "#phy-cells" +allOf: + - if: + properties: + compatible: + contains: + enum: + - qcom,ipq6018-qmp-usb3-phy + - qcom,ipq8074-qmp-usb3-phy + - qcom,ipq9574-qmp-usb3-phy + - qcom,msm8996-qmp-usb3-phy + - qcom,sdx55-qmp-usb3-uni-phy + - qcom,sdx65-qmp-usb3-uni-phy + - qcom,sdx75-qmp-usb3-uni-phy + then: + properties: + clocks: + maxItems: 4 + clock-names: + items: + - const: aux + - const: ref + - const: cfg_ahb + - const: pipe + + - if: + properties: + compatible: + contains: + enum: + - qcom,sa8775p-qmp-usb3-uni-phy + - qcom,sc8280xp-qmp-usb3-uni-phy + - qcom,sm8150-qmp-usb3-uni-phy + - qcom,sm8250-qmp-usb3-uni-phy + - qcom,sm8350-qmp-usb3-uni-phy + - qcom,x1e80100-qmp-usb3-uni-phy + then: + properties: + clocks: + maxItems: 4 + clock-names: + items: + - const: aux + - const: ref + - const: com_aux + - const: pipe + + - if: + properties: + compatible: + contains: + enum: + - qcom,sdm845-qmp-usb3-uni-phy + then: + properties: + clocks: + maxItems: 5 + clock-names: + items: + - const: aux + - const: cfg_ahb + - const: ref + - const: com_aux + - const: pipe + + - if: + properties: + compatible: + contains: + enum: + - qcom,sa8775p-qmp-usb3-uni-phy + - qcom,sc8280xp-qmp-usb3-uni-phy + - qcom,x1e80100-qmp-usb3-uni-phy + then: + required: + - power-domains + additionalProperties: false examples: diff --git a/dts/Bindings/phy/qcom,sc8280xp-qmp-usb43dp-phy.yaml b/dts/Bindings/phy/qcom,sc8280xp-qmp-usb43dp-phy.yaml index 6f31693d98..2d0d7e9e64 100644 --- a/dts/Bindings/phy/qcom,sc8280xp-qmp-usb43dp-phy.yaml +++ b/dts/Bindings/phy/qcom,sc8280xp-qmp-usb43dp-phy.yaml @@ -16,20 +16,35 @@ description: properties: compatible: enum: + - qcom,sc7180-qmp-usb3-dp-phy + - qcom,sc7280-qmp-usb3-dp-phy + - qcom,sc8180x-qmp-usb3-dp-phy - qcom,sc8280xp-qmp-usb43dp-phy + - qcom,sdm845-qmp-usb3-dp-phy + - qcom,sm6350-qmp-usb3-dp-phy + - qcom,sm8150-qmp-usb3-dp-phy + - qcom,sm8250-qmp-usb3-dp-phy + - qcom,sm8350-qmp-usb3-dp-phy + - qcom,sm8450-qmp-usb3-dp-phy + - qcom,sm8550-qmp-usb3-dp-phy + - qcom,sm8650-qmp-usb3-dp-phy + - qcom,x1e80100-qmp-usb3-dp-phy reg: maxItems: 1 clocks: - maxItems: 4 + minItems: 4 + maxItems: 5 clock-names: + minItems: 4 items: - const: aux - const: ref - const: com_aux - const: usb3_pipe + - const: cfg_ahb power-domains: maxItems: 1 @@ -49,19 +64,38 @@ properties: "#clock-cells": const: 1 description: - See include/dt-bindings/dt-bindings/phy/phy-qcom-qmp.h + See include/dt-bindings/phy/phy-qcom-qmp.h "#phy-cells": const: 1 description: - See include/dt-bindings/dt-bindings/phy/phy-qcom-qmp.h + See include/dt-bindings/phy/phy-qcom-qmp.h + + orientation-switch: + description: + Flag the PHY as possible handler of USB Type-C orientation switching + type: boolean + + ports: + $ref: /schemas/graph.yaml#/properties/ports + properties: + port@0: + $ref: /schemas/graph.yaml#/properties/port + description: Output endpoint of the PHY + + port@1: + $ref: /schemas/graph.yaml#/properties/port + description: Incoming endpoint from the USB controller + + port@2: + $ref: /schemas/graph.yaml#/properties/port + description: Incoming endpoint from the DisplayPort controller required: - compatible - reg - clocks - clock-names - - power-domains - resets - reset-names - vdda-phy-supply @@ -69,6 +103,42 @@ required: - "#clock-cells" - "#phy-cells" +allOf: + - if: + properties: + compatible: + enum: + - qcom,sc7180-qmp-usb3-dp-phy + - qcom,sdm845-qmp-usb3-dp-phy + then: + properties: + clocks: + maxItems: 5 + clock-names: + maxItems: 5 + else: + properties: + clocks: + maxItems: 4 + clock-names: + maxItems: 4 + + - if: + properties: + compatible: + enum: + - qcom,sc8280xp-qmp-usb43dp-phy + - qcom,sm6350-qmp-usb3-dp-phy + - qcom,sm8550-qmp-usb3-dp-phy + - qcom,sm8650-qmp-usb3-dp-phy + - qcom,x1e80100-qmp-usb3-dp-phy + then: + required: + - power-domains + else: + properties: + power-domains: false + additionalProperties: false examples: @@ -94,6 +164,37 @@ examples: vdda-phy-supply = <&vreg_l9d>; vdda-pll-supply = <&vreg_l4d>; + orientation-switch; + #clock-cells = <1>; #phy-cells = <1>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + endpoint { + remote-endpoint = <&typec_connector_ss>; + }; + }; + + port@1 { + reg = <1>; + + endpoint { + remote-endpoint = <&dwc3_ss_out>; + }; + }; + + port@2 { + reg = <2>; + + endpoint { + remote-endpoint = <&mdss_dp_out>; + }; + }; + }; }; diff --git a/dts/Bindings/phy/qcom,snps-eusb2-phy.yaml b/dts/Bindings/phy/qcom,snps-eusb2-phy.yaml new file mode 100644 index 0000000000..b82f7f5731 --- /dev/null +++ b/dts/Bindings/phy/qcom,snps-eusb2-phy.yaml @@ -0,0 +1,86 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/phy/qcom,snps-eusb2-phy.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm SNPS eUSB2 phy controller + +maintainers: + - Abel Vesa <abel.vesa@linaro.org> + +description: + eUSB2 controller supports LS/FS/HS usb connectivity on Qualcomm chipsets. + +properties: + compatible: + oneOf: + - items: + - enum: + - qcom,sdx75-snps-eusb2-phy + - qcom,sm8650-snps-eusb2-phy + - qcom,x1e80100-snps-eusb2-phy + - const: qcom,sm8550-snps-eusb2-phy + - const: qcom,sm8550-snps-eusb2-phy + + reg: + maxItems: 1 + + "#phy-cells": + const: 0 + + clocks: + items: + - description: ref + + clock-names: + items: + - const: ref + + resets: + maxItems: 1 + + phys: + maxItems: 1 + description: + Phandle to eUSB2 to USB 2.0 repeater + + vdd-supply: + description: + Phandle to 0.88V regulator supply to PHY digital circuit. + + vdda12-supply: + description: + Phandle to 1.2V regulator supply to PHY refclk pll block. + +required: + - compatible + - reg + - "#phy-cells" + - clocks + - clock-names + - vdd-supply + - vdda12-supply + - resets + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/qcom,sm8550-gcc.h> + #include <dt-bindings/clock/qcom,rpmh.h> + #include <dt-bindings/clock/qcom,sm8550-tcsr.h> + + usb_1_hsphy: phy@88e3000 { + compatible = "qcom,sm8550-snps-eusb2-phy"; + reg = <0x88e3000 0x154>; + #phy-cells = <0>; + + clocks = <&tcsrcc TCSR_USB2_CLKREF_EN>; + clock-names = "ref"; + + vdd-supply = <&vreg_l1e_0p88>; + vdda12-supply = <&vreg_l3e_1p2>; + + resets = <&gcc GCC_QUSB2PHY_PRIM_BCR>; + }; diff --git a/dts/Bindings/phy/qcom,snps-eusb2-repeater.yaml b/dts/Bindings/phy/qcom,snps-eusb2-repeater.yaml new file mode 100644 index 0000000000..24c733c10e --- /dev/null +++ b/dts/Bindings/phy/qcom,snps-eusb2-repeater.yaml @@ -0,0 +1,78 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/phy/qcom,snps-eusb2-repeater.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Synopsis eUSB2 to USB 2.0 repeater + +maintainers: + - Abel Vesa <abel.vesa@linaro.org> + +description: + eUSB2 repeater converts between eUSB2 and USB 2.0 signaling levels and + allows a eUSB2 PHY to connect to legacy USB 2.0 products + +properties: + compatible: + oneOf: + - items: + - enum: + - qcom,pm7550ba-eusb2-repeater + - const: qcom,pm8550b-eusb2-repeater + - const: qcom,pm8550b-eusb2-repeater + + reg: + maxItems: 1 + + "#phy-cells": + const: 0 + + vdd18-supply: true + + vdd3-supply: true + + qcom,tune-usb2-disc-thres: + $ref: /schemas/types.yaml#/definitions/uint8 + description: High-Speed disconnect threshold + minimum: 0 + maximum: 7 + default: 0 + + qcom,tune-usb2-amplitude: + $ref: /schemas/types.yaml#/definitions/uint8 + description: High-Speed trasmit amplitude + minimum: 0 + maximum: 15 + default: 8 + + qcom,tune-usb2-preem: + $ref: /schemas/types.yaml#/definitions/uint8 + description: High-Speed TX pre-emphasis tuning + minimum: 0 + maximum: 7 + default: 5 + +required: + - compatible + - reg + - "#phy-cells" + +additionalProperties: false + +examples: + - | + #include <dt-bindings/spmi/spmi.h> + + pmic@7 { + reg = <0x7 SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + + pm8550b_eusb2_repeater: phy@fd00 { + compatible = "qcom,pm8550b-eusb2-repeater"; + reg = <0xfd00>; + #phy-cells = <0>; + }; + }; +... diff --git a/dts/Bindings/phy/qcom,usb-hs-28nm.yaml b/dts/Bindings/phy/qcom,usb-hs-28nm.yaml index abcc4373f3..6c99e02b2b 100644 --- a/dts/Bindings/phy/qcom,usb-hs-28nm.yaml +++ b/dts/Bindings/phy/qcom,usb-hs-28nm.yaml @@ -1,8 +1,8 @@ # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) %YAML 1.2 --- -$id: "http://devicetree.org/schemas/phy/qcom,usb-hs-28nm.yaml#" -$schema: "http://devicetree.org/meta-schemas/core.yaml#" +$id: http://devicetree.org/schemas/phy/qcom,usb-hs-28nm.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# title: Qualcomm Synopsys DesignWare Core 28nm High-Speed PHY @@ -16,7 +16,6 @@ properties: compatible: enum: - qcom,usb-hs-28nm-femtophy - - qcom,usb-hs-28nm-mdm9607 reg: maxItems: 1 diff --git a/dts/Bindings/phy/qcom,usb-hs-phy.yaml b/dts/Bindings/phy/qcom,usb-hs-phy.yaml index aa97478dd0..f042d6af15 100644 --- a/dts/Bindings/phy/qcom,usb-hs-phy.yaml +++ b/dts/Bindings/phy/qcom,usb-hs-phy.yaml @@ -13,7 +13,9 @@ if: properties: compatible: contains: - const: qcom,usb-hs-phy-apq8064 + enum: + - qcom,usb-hs-phy-apq8064 + - qcom,usb-hs-phy-msm8960 then: properties: resets: @@ -40,6 +42,7 @@ properties: - qcom,usb-hs-phy-apq8064 - qcom,usb-hs-phy-msm8226 - qcom,usb-hs-phy-msm8916 + - qcom,usb-hs-phy-msm8960 - qcom,usb-hs-phy-msm8974 - const: qcom,usb-hs-phy diff --git a/dts/Bindings/phy/qcom,usb-hsic-phy.txt b/dts/Bindings/phy/qcom,usb-hsic-phy.txt deleted file mode 100644 index 3c7cb2be4b..0000000000 --- a/dts/Bindings/phy/qcom,usb-hsic-phy.txt +++ /dev/null @@ -1,65 +0,0 @@ -Qualcomm's USB HSIC PHY - -PROPERTIES - -- compatible: - Usage: required - Value type: <string> - Definition: Should contain "qcom,usb-hsic-phy" and more specifically one of the - following: - - "qcom,usb-hsic-phy-mdm9615" - "qcom,usb-hsic-phy-msm8974" - -- #phy-cells: - Usage: required - Value type: <u32> - Definition: Should contain 0 - -- clocks: - Usage: required - Value type: <prop-encoded-array> - Definition: Should contain clock specifier for phy, calibration and - a calibration sleep clock - -- clock-names: - Usage: required - Value type: <stringlist> - Definition: Should contain "phy, "cal" and "cal_sleep" - -- pinctrl-names: - Usage: required - Value type: <stringlist> - Definition: Should contain "init" and "default" in that order - -- pinctrl-0: - Usage: required - Value type: <prop-encoded-array> - Definition: List of pinctrl settings to apply to keep HSIC pins in a glitch - free state - -- pinctrl-1: - Usage: required - Value type: <prop-encoded-array> - Definition: List of pinctrl settings to apply to mux out the HSIC pins - -EXAMPLE - -usb-controller { - ulpi { - phy { - compatible = "qcom,usb-hsic-phy-msm8974", - "qcom,usb-hsic-phy"; - #phy-cells = <0>; - pinctrl-names = "init", "default"; - pinctrl-0 = <&hsic_sleep>; - pinctrl-1 = <&hsic_default>; - clocks = <&gcc GCC_USB_HSIC_CLK>, - <&gcc GCC_USB_HSIC_IO_CAL_CLK>, - <&gcc GCC_USB_HSIC_IO_CAL_SLEEP_CLK>; - clock-names = "phy", "cal", "cal_sleep"; - assigned-clocks = <&gcc GCC_USB_HSIC_IO_CAL_CLK>; - assigned-clock-rates = <960000>; - }; - }; -}; diff --git a/dts/Bindings/phy/qcom,usb-hsic-phy.yaml b/dts/Bindings/phy/qcom,usb-hsic-phy.yaml new file mode 100644 index 0000000000..077e13a944 --- /dev/null +++ b/dts/Bindings/phy/qcom,usb-hsic-phy.yaml @@ -0,0 +1,67 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/phy/qcom,usb-hsic-phy.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm USB HSIC PHY Controller + +maintainers: + - Bjorn Andersson <andersson@kernel.org> + - Vinod Koul <vkoul@kernel.org> + +properties: + compatible: + items: + - enum: + - qcom,usb-hsic-phy-mdm9615 + - qcom,usb-hsic-phy-msm8974 + - const: qcom,usb-hsic-phy + + clocks: + maxItems: 3 + + clock-names: + items: + - const: phy + - const: cal + - const: cal_sleep + + "#phy-cells": + const: 0 + + pinctrl-0: true + pinctrl-1: true + + pinctrl-names: + items: + - const: init + - const: default + +required: + - compatible + - clocks + - clock-names + - "#phy-cells" + - pinctrl-0 + - pinctrl-1 + - pinctrl-names + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/qcom,gcc-msm8974.h> + + phy { + compatible = "qcom,usb-hsic-phy-msm8974", + "qcom,usb-hsic-phy"; + clocks = <&gcc GCC_USB_HSIC_CLK>, + <&gcc GCC_USB_HSIC_IO_CAL_CLK>, + <&gcc GCC_USB_HSIC_IO_CAL_SLEEP_CLK>; + clock-names = "phy", "cal", "cal_sleep"; + #phy-cells = <0>; + pinctrl-names = "init", "default"; + pinctrl-0 = <&hsic_sleep>; + pinctrl-1 = <&hsic_default>; + }; diff --git a/dts/Bindings/phy/qcom,usb-snps-femto-v2.yaml b/dts/Bindings/phy/qcom,usb-snps-femto-v2.yaml index 68e70961be..0f200e3f97 100644 --- a/dts/Bindings/phy/qcom,usb-snps-femto-v2.yaml +++ b/dts/Bindings/phy/qcom,usb-snps-femto-v2.yaml @@ -1,8 +1,8 @@ # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) %YAML 1.2 --- -$id: "http://devicetree.org/schemas/phy/qcom,usb-snps-femto-v2.yaml#" -$schema: "http://devicetree.org/meta-schemas/core.yaml#" +$id: http://devicetree.org/schemas/phy/qcom,usb-snps-femto-v2.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# title: Qualcomm Synopsys Femto High-Speed USB PHY V2 @@ -14,18 +14,26 @@ description: | properties: compatible: - enum: - - qcom,usb-snps-hs-5nm-phy - - qcom,usb-snps-hs-7nm-phy - - qcom,sc7280-usb-hs-phy - - qcom,sc8180x-usb-hs-phy - - qcom,sc8280xp-usb-hs-phy - - qcom,sm6375-usb-hs-phy - - qcom,sm8150-usb-hs-phy - - qcom,sm8250-usb-hs-phy - - qcom,sm8350-usb-hs-phy - - qcom,sm8450-usb-hs-phy - - qcom,usb-snps-femto-v2-phy + oneOf: + - enum: + - qcom,sc8180x-usb-hs-phy + - qcom,usb-snps-femto-v2-phy + - items: + - enum: + - qcom,sa8775p-usb-hs-phy + - qcom,sc8280xp-usb-hs-phy + - const: qcom,usb-snps-hs-5nm-phy + - items: + - enum: + - qcom,sc7280-usb-hs-phy + - qcom,sdx55-usb-hs-phy + - qcom,sdx65-usb-hs-phy + - qcom,sm6375-usb-hs-phy + - qcom,sm8150-usb-hs-phy + - qcom,sm8250-usb-hs-phy + - qcom,sm8350-usb-hs-phy + - qcom,sm8450-usb-hs-phy + - const: qcom,usb-snps-hs-7nm-phy reg: maxItems: 1 @@ -160,7 +168,7 @@ examples: #include <dt-bindings/clock/qcom,rpmh.h> #include <dt-bindings/clock/qcom,gcc-sm8150.h> phy@88e2000 { - compatible = "qcom,sm8150-usb-hs-phy"; + compatible = "qcom,sm8150-usb-hs-phy", "qcom,usb-snps-hs-7nm-phy"; reg = <0x088e2000 0x400>; #phy-cells = <0>; diff --git a/dts/Bindings/phy/qcom,usb-ss.yaml b/dts/Bindings/phy/qcom,usb-ss.yaml index bd1388d62c..6e4254ff1c 100644 --- a/dts/Bindings/phy/qcom,usb-ss.yaml +++ b/dts/Bindings/phy/qcom,usb-ss.yaml @@ -1,8 +1,8 @@ # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) %YAML 1.2 --- -$id: "http://devicetree.org/schemas/phy/qcom,usb-ss.yaml#" -$schema: "http://devicetree.org/meta-schemas/core.yaml#" +$id: http://devicetree.org/schemas/phy/qcom,usb-ss.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# title: Qualcomm Synopsys 1.0.0 SuperSpeed USB PHY diff --git a/dts/Bindings/phy/qcom-pcie2-phy.txt b/dts/Bindings/phy/qcom-pcie2-phy.txt deleted file mode 100644 index 30064253f2..0000000000 --- a/dts/Bindings/phy/qcom-pcie2-phy.txt +++ /dev/null @@ -1,42 +0,0 @@ -Qualcomm PCIe2 PHY controller -============================= - -The Qualcomm PCIe2 PHY is a Synopsys based phy found in a number of Qualcomm -platforms. - -Required properties: - - compatible: compatible list, should be: - "qcom,qcs404-pcie2-phy", "qcom,pcie2-phy" - - - reg: offset and length of the PHY register set. - - #phy-cells: must be 0. - - - clocks: a clock-specifier pair for the "pipe" clock - - - vdda-vp-supply: phandle to low voltage regulator - - vdda-vph-supply: phandle to high voltage regulator - - - resets: reset-specifier pairs for the "phy" and "pipe" resets - - reset-names: list of resets, should contain: - "phy" and "pipe" - - - clock-output-names: name of the outgoing clock signal from the PHY PLL - - #clock-cells: must be 0 - -Example: - phy@7786000 { - compatible = "qcom,qcs404-pcie2-phy", "qcom,pcie2-phy"; - reg = <0x07786000 0xb8>; - - clocks = <&gcc GCC_PCIE_0_PIPE_CLK>; - resets = <&gcc GCC_PCIEPHY_0_PHY_BCR>, - <&gcc GCC_PCIE_0_PIPE_ARES>; - reset-names = "phy", "pipe"; - - vdda-vp-supply = <&vreg_l3_1p05>; - vdda-vph-supply = <&vreg_l5_1p8>; - - clock-output-names = "pcie_0_pipe_clk"; - #clock-cells = <0>; - #phy-cells = <0>; - }; diff --git a/dts/Bindings/phy/qcom-usb-ipq4019-phy.yaml b/dts/Bindings/phy/qcom-usb-ipq4019-phy.yaml index 3e7191b168..09c614952f 100644 --- a/dts/Bindings/phy/qcom-usb-ipq4019-phy.yaml +++ b/dts/Bindings/phy/qcom-usb-ipq4019-phy.yaml @@ -1,8 +1,8 @@ # SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) %YAML 1.2 --- -$id: "http://devicetree.org/schemas/phy/qcom-usb-ipq4019-phy.yaml#" -$schema: "http://devicetree.org/meta-schemas/core.yaml#" +$id: http://devicetree.org/schemas/phy/qcom-usb-ipq4019-phy.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# title: Qualcom IPQ40xx Dakota HS/SS USB PHY diff --git a/dts/Bindings/phy/ralink-usb-phy.txt b/dts/Bindings/phy/ralink-usb-phy.txt deleted file mode 100644 index 9d2868a437..0000000000 --- a/dts/Bindings/phy/ralink-usb-phy.txt +++ /dev/null @@ -1,23 +0,0 @@ -Mediatek/Ralink USB PHY - -Required properties: - - compatible: "ralink,rt3352-usbphy" - "mediatek,mt7620-usbphy" - "mediatek,mt7628-usbphy" - - reg: required for "mediatek,mt7628-usbphy", unused otherwise - - #phy-cells: should be 0 - - ralink,sysctl: a phandle to a ralink syscon register region - - resets: the two reset controllers for host and device - - reset-names: the names of the 2 reset controllers - -Example: - -usbphy: phy { - compatible = "mediatek,mt7628-usbphy"; - reg = <0x10120000 0x1000>; - #phy-cells = <0>; - - ralink,sysctl = <&sysc>; - resets = <&rstctrl 22 &rstctrl 25>; - reset-names = "host", "device"; -}; diff --git a/dts/Bindings/phy/realtek,usb2phy.yaml b/dts/Bindings/phy/realtek,usb2phy.yaml new file mode 100644 index 0000000000..9911ada39e --- /dev/null +++ b/dts/Bindings/phy/realtek,usb2phy.yaml @@ -0,0 +1,175 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +# Copyright 2023 Realtek Semiconductor Corporation +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/phy/realtek,usb2phy.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Realtek DHC SoCs USB 2.0 PHY + +maintainers: + - Stanley Chang <stanley_chang@realtek.com> + +description: | + Realtek USB 2.0 PHY support the digital home center (DHC) RTD series SoCs. + The USB 2.0 PHY driver is designed to support the XHCI controller. The SoCs + support multiple XHCI controllers. One PHY device node maps to one XHCI + controller. + + RTD1295/RTD1619 SoCs USB + The USB architecture includes three XHCI controllers. + Each XHCI maps to one USB 2.0 PHY and map one USB 3.0 PHY on some + controllers. + XHCI controller#0 -- usb2phy -- phy#0 + |- usb3phy -- phy#0 + XHCI controller#1 -- usb2phy -- phy#0 + XHCI controller#2 -- usb2phy -- phy#0 + |- usb3phy -- phy#0 + + RTD1395 SoCs USB + The USB architecture includes two XHCI controllers. + The controller#0 has one USB 2.0 PHY. The controller#1 includes two USB 2.0 + PHY. + XHCI controller#0 -- usb2phy -- phy#0 + XHCI controller#1 -- usb2phy -- phy#0 + |- phy#1 + + RTD1319/RTD1619b SoCs USB + The USB architecture includes three XHCI controllers. + Each XHCI maps to one USB 2.0 PHY and map one USB 3.0 PHY on controllers#2. + XHCI controller#0 -- usb2phy -- phy#0 + XHCI controller#1 -- usb2phy -- phy#0 + XHCI controller#2 -- usb2phy -- phy#0 + |- usb3phy -- phy#0 + + RTD1319d SoCs USB + The USB architecture includes three XHCI controllers. + Each xhci maps to one USB 2.0 PHY and map one USB 3.0 PHY on controllers#0. + XHCI controller#0 -- usb2phy -- phy#0 + |- usb3phy -- phy#0 + XHCI controller#1 -- usb2phy -- phy#0 + XHCI controller#2 -- usb2phy -- phy#0 + + RTD1312c/RTD1315e SoCs USB + The USB architecture includes three XHCI controllers. + Each XHCI maps to one USB 2.0 PHY. + XHCI controller#0 -- usb2phy -- phy#0 + XHCI controller#1 -- usb2phy -- phy#0 + XHCI controller#2 -- usb2phy -- phy#0 + +properties: + compatible: + enum: + - realtek,rtd1295-usb2phy + - realtek,rtd1312c-usb2phy + - realtek,rtd1315e-usb2phy + - realtek,rtd1319-usb2phy + - realtek,rtd1319d-usb2phy + - realtek,rtd1395-usb2phy + - realtek,rtd1395-usb2phy-2port + - realtek,rtd1619-usb2phy + - realtek,rtd1619b-usb2phy + + reg: + items: + - description: PHY data registers + - description: PHY control registers + + "#phy-cells": + const: 0 + + nvmem-cells: + maxItems: 2 + description: + Phandles to nvmem cell that contains the trimming data. + If unspecified, default value is used. + + nvmem-cell-names: + items: + - const: usb-dc-cal + - const: usb-dc-dis + description: + The following names, which correspond to each nvmem-cells. + usb-dc-cal is the driving level for each phy specified via efuse. + usb-dc-dis is the disconnection level for each phy specified via efuse. + + realtek,inverse-hstx-sync-clock: + description: + For one of the phys of RTD1619b SoC, the synchronous clock of the + high-speed tx must be inverted. + type: boolean + + realtek,driving-level: + description: + Control the magnitude of High speed Dp/Dm output swing (mV). + For a different board or port, the original magnitude maybe not meet + the specification. In this situation we can adjust the value to meet + the specification. + $ref: /schemas/types.yaml#/definitions/uint32 + default: 8 + minimum: 0 + maximum: 31 + + realtek,driving-level-compensate: + description: + For RTD1315e SoC, the driving level can be adjusted by reading the + efuse table. This property provides drive compensation. + If the magnitude of High speed Dp/Dm output swing still not meet the + specification, then we can set this value to meet the specification. + $ref: /schemas/types.yaml#/definitions/int32 + default: 0 + minimum: -8 + maximum: 8 + + realtek,disconnection-compensate: + description: + This adjusts the disconnection level compensation for the different + boards with different disconnection level. + $ref: /schemas/types.yaml#/definitions/int32 + default: 0 + minimum: -8 + maximum: 8 + +required: + - compatible + - reg + - "#phy-cells" + +allOf: + - if: + not: + properties: + compatible: + contains: + enum: + - realtek,rtd1619b-usb2phy + then: + properties: + realtek,inverse-hstx-sync-clock: false + + - if: + not: + properties: + compatible: + contains: + enum: + - realtek,rtd1315e-usb2phy + then: + properties: + realtek,driving-level-compensate: false + +additionalProperties: false + +examples: + - | + usb-phy@13214 { + compatible = "realtek,rtd1619b-usb2phy"; + reg = <0x13214 0x4>, <0x28280 0x4>; + #phy-cells = <0>; + nvmem-cells = <&otp_usb_port0_dc_cal>, <&otp_usb_port0_dc_dis>; + nvmem-cell-names = "usb-dc-cal", "usb-dc-dis"; + + realtek,inverse-hstx-sync-clock; + realtek,driving-level = <0xa>; + realtek,disconnection-compensate = <(-1)>; + }; diff --git a/dts/Bindings/phy/realtek,usb3phy.yaml b/dts/Bindings/phy/realtek,usb3phy.yaml new file mode 100644 index 0000000000..dfe2bb4e59 --- /dev/null +++ b/dts/Bindings/phy/realtek,usb3phy.yaml @@ -0,0 +1,107 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +# Copyright 2023 Realtek Semiconductor Corporation +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/phy/realtek,usb3phy.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Realtek DHC SoCs USB 3.0 PHY + +maintainers: + - Stanley Chang <stanley_chang@realtek.com> + +description: | + Realtek USB 3.0 PHY support the digital home center (DHC) RTD series SoCs. + The USB 3.0 PHY driver is designed to support the XHCI controller. The SoCs + support multiple XHCI controllers. One PHY device node maps to one XHCI + controller. + + RTD1295/RTD1619 SoCs USB + The USB architecture includes three XHCI controllers. + Each XHCI maps to one USB 2.0 PHY and map one USB 3.0 PHY on some + controllers. + XHCI controller#0 -- usb2phy -- phy#0 + |- usb3phy -- phy#0 + XHCI controller#1 -- usb2phy -- phy#0 + XHCI controller#2 -- usb2phy -- phy#0 + |- usb3phy -- phy#0 + + RTD1319/RTD1619b SoCs USB + The USB architecture includes three XHCI controllers. + Each XHCI maps to one USB 2.0 PHY and map one USB 3.0 PHY on controllers#2. + XHCI controller#0 -- usb2phy -- phy#0 + XHCI controller#1 -- usb2phy -- phy#0 + XHCI controller#2 -- usb2phy -- phy#0 + |- usb3phy -- phy#0 + + RTD1319d SoCs USB + The USB architecture includes three XHCI controllers. + Each xhci maps to one USB 2.0 PHY and map one USB 3.0 PHY on controllers#0. + XHCI controller#0 -- usb2phy -- phy#0 + |- usb3phy -- phy#0 + XHCI controller#1 -- usb2phy -- phy#0 + XHCI controller#2 -- usb2phy -- phy#0 + +properties: + compatible: + enum: + - realtek,rtd1295-usb3phy + - realtek,rtd1319-usb3phy + - realtek,rtd1319d-usb3phy + - realtek,rtd1619-usb3phy + - realtek,rtd1619b-usb3phy + + reg: + maxItems: 1 + + "#phy-cells": + const: 0 + + nvmem-cells: + maxItems: 1 + description: A phandle to the tx lfps swing trim data provided by + a nvmem device, if unspecified, default values shall be used. + + nvmem-cell-names: + items: + - const: usb_u3_tx_lfps_swing_trim + + realtek,amplitude-control-coarse-tuning: + description: + This adjusts the signal amplitude for normal operation and beacon LFPS. + This value is a parameter for coarse tuning. + For different boards, if the default value is inappropriate, this + property can be assigned to adjust. + $ref: /schemas/types.yaml#/definitions/uint32 + default: 255 + minimum: 0 + maximum: 255 + + realtek,amplitude-control-fine-tuning: + description: + This adjusts the signal amplitude for normal operation and beacon LFPS. + This value is used for fine-tuning parameters. + $ref: /schemas/types.yaml#/definitions/uint32 + default: 65535 + minimum: 0 + maximum: 65535 + +required: + - compatible + - reg + - "#phy-cells" + +additionalProperties: false + +examples: + - | + usb-phy@13e10 { + compatible = "realtek,rtd1319d-usb3phy"; + reg = <0x13e10 0x4>; + #phy-cells = <0>; + + nvmem-cells = <&otp_usb_u3_tx_lfps_swing_trim>; + nvmem-cell-names = "usb_u3_tx_lfps_swing_trim"; + + realtek,amplitude-control-coarse-tuning = <0x77>; + }; diff --git a/dts/Bindings/phy/phy-rockchip-inno-usb2.yaml b/dts/Bindings/phy/rockchip,inno-usb2phy.yaml index f71920082f..5254413137 100644 --- a/dts/Bindings/phy/phy-rockchip-inno-usb2.yaml +++ b/dts/Bindings/phy/rockchip,inno-usb2phy.yaml @@ -1,7 +1,7 @@ # SPDX-License-Identifier: GPL-2.0 %YAML 1.2 --- -$id: http://devicetree.org/schemas/phy/phy-rockchip-inno-usb2.yaml# +$id: http://devicetree.org/schemas/phy/rockchip,inno-usb2phy.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# title: Rockchip USB2.0 phy with inno IP block @@ -20,6 +20,7 @@ properties: - rockchip,rk3366-usb2phy - rockchip,rk3399-usb2phy - rockchip,rk3568-usb2phy + - rockchip,rk3588-usb2phy - rockchip,rv1108-usb2phy reg: @@ -56,6 +57,14 @@ properties: description: Muxed interrupt for both ports maxItems: 1 + resets: + maxItems: 2 + + reset-names: + items: + - const: phy + - const: apb + rockchip,usbgrf: $ref: /schemas/types.yaml#/definitions/phandle description: @@ -120,15 +129,21 @@ required: - reg - clock-output-names - "#clock-cells" - - host-port - - otg-port + +anyOf: + - required: + - otg-port + - required: + - host-port allOf: - if: properties: compatible: contains: - const: rockchip,rk3568-usb2phy + enum: + - rockchip,rk3568-usb2phy + - rockchip,rk3588-usb2phy then: properties: diff --git a/dts/Bindings/phy/rockchip,pcie3-phy.yaml b/dts/Bindings/phy/rockchip,pcie3-phy.yaml index 9f2d8d2cc7..c4fbffcde6 100644 --- a/dts/Bindings/phy/rockchip,pcie3-phy.yaml +++ b/dts/Bindings/phy/rockchip,pcie3-phy.yaml @@ -13,19 +13,18 @@ properties: compatible: enum: - rockchip,rk3568-pcie3-phy + - rockchip,rk3588-pcie3-phy reg: maxItems: 1 clocks: - minItems: 3 + minItems: 1 maxItems: 3 clock-names: - items: - - const: refclk_m - - const: refclk_n - - const: pclk + minItems: 1 + maxItems: 3 data-lanes: description: which lanes (by position) should be mapped to which @@ -61,6 +60,30 @@ required: - rockchip,phy-grf - "#phy-cells" +allOf: + - if: + properties: + compatible: + enum: + - rockchip,rk3588-pcie3-phy + then: + properties: + clocks: + maxItems: 1 + clock-names: + items: + - const: pclk + else: + properties: + clocks: + minItems: 3 + + clock-names: + items: + - const: refclk_m + - const: refclk_n + - const: pclk + additionalProperties: false examples: diff --git a/dts/Bindings/phy/rockchip,px30-dsi-dphy.yaml b/dts/Bindings/phy/rockchip,px30-dsi-dphy.yaml index 5c35e5ceec..46e64fa293 100644 --- a/dts/Bindings/phy/rockchip,px30-dsi-dphy.yaml +++ b/dts/Bindings/phy/rockchip,px30-dsi-dphy.yaml @@ -19,6 +19,7 @@ properties: - rockchip,rk3128-dsi-dphy - rockchip,rk3368-dsi-dphy - rockchip,rk3568-dsi-dphy + - rockchip,rv1126-dsi-dphy reg: maxItems: 1 diff --git a/dts/Bindings/phy/rockchip,rk3288-dp-phy.yaml b/dts/Bindings/phy/rockchip,rk3288-dp-phy.yaml new file mode 100644 index 0000000000..2538235c5a --- /dev/null +++ b/dts/Bindings/phy/rockchip,rk3288-dp-phy.yaml @@ -0,0 +1,41 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/phy/rockchip,rk3288-dp-phy.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Rockchip specific extensions to the Analogix Display Port PHY + +maintainers: + - Heiko Stuebner <heiko@sntech.de> + +properties: + compatible: + const: rockchip,rk3288-dp-phy + + clocks: + maxItems: 1 + + clock-names: + const: 24m + + "#phy-cells": + const: 0 + +required: + - compatible + - clocks + - clock-names + - "#phy-cells" + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/rk3288-cru.h> + edp-phy { + compatible = "rockchip,rk3288-dp-phy"; + clocks = <&cru SCLK_EDP_24M>; + clock-names = "24m"; + #phy-cells = <0>; + }; diff --git a/dts/Bindings/phy/rockchip,rk3588-hdptx-phy.yaml b/dts/Bindings/phy/rockchip,rk3588-hdptx-phy.yaml new file mode 100644 index 0000000000..54e822c715 --- /dev/null +++ b/dts/Bindings/phy/rockchip,rk3588-hdptx-phy.yaml @@ -0,0 +1,91 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/phy/rockchip,rk3588-hdptx-phy.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Rockchip SoC HDMI/eDP Transmitter Combo PHY + +maintainers: + - Cristian Ciocaltea <cristian.ciocaltea@collabora.com> + +properties: + compatible: + enum: + - rockchip,rk3588-hdptx-phy + + reg: + maxItems: 1 + + clocks: + items: + - description: Reference clock + - description: APB clock + + clock-names: + items: + - const: ref + - const: apb + + "#phy-cells": + const: 0 + + resets: + items: + - description: PHY reset line + - description: APB reset line + - description: INIT reset line + - description: CMN reset line + - description: LANE reset line + - description: ROPLL reset line + - description: LCPLL reset line + + reset-names: + items: + - const: phy + - const: apb + - const: init + - const: cmn + - const: lane + - const: ropll + - const: lcpll + + rockchip,grf: + $ref: /schemas/types.yaml#/definitions/phandle + description: Some PHY related data is accessed through GRF regs. + +required: + - compatible + - reg + - clocks + - clock-names + - "#phy-cells" + - resets + - reset-names + - rockchip,grf + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/rockchip,rk3588-cru.h> + #include <dt-bindings/reset/rockchip,rk3588-cru.h> + + soc { + #address-cells = <2>; + #size-cells = <2>; + + phy@fed60000 { + compatible = "rockchip,rk3588-hdptx-phy"; + reg = <0x0 0xfed60000 0x0 0x2000>; + clocks = <&cru CLK_USB2PHY_HDPTXRXPHY_REF>, <&cru PCLK_HDPTX0>; + clock-names = "ref", "apb"; + #phy-cells = <0>; + resets = <&cru SRST_HDPTX0>, <&cru SRST_P_HDPTX0>, + <&cru SRST_HDPTX0_INIT>, <&cru SRST_HDPTX0_CMN>, + <&cru SRST_HDPTX0_LANE>, <&cru SRST_HDPTX0_ROPLL>, + <&cru SRST_HDPTX0_LCPLL>; + reset-names = "phy", "apb", "init", "cmn", "lane", "ropll", "lcpll"; + rockchip,grf = <&hdptxphy_grf>; + }; + }; diff --git a/dts/Bindings/phy/rockchip-dp-phy.txt b/dts/Bindings/phy/rockchip-dp-phy.txt deleted file mode 100644 index e3b4809fbe..0000000000 --- a/dts/Bindings/phy/rockchip-dp-phy.txt +++ /dev/null @@ -1,26 +0,0 @@ -Rockchip specific extensions to the Analogix Display Port PHY ------------------------------------- - -Required properties: -- compatible : should be one of the following supported values: - - "rockchip.rk3288-dp-phy" -- clocks: from common clock binding: handle to dp clock. - of memory mapped region. -- clock-names: from common clock binding: - Required elements: "24m" -- #phy-cells : from the generic PHY bindings, must be 0; - -Example: - -grf: syscon@ff770000 { - compatible = "rockchip,rk3288-grf", "syscon", "simple-mfd"; - -... - - edp_phy: edp-phy { - compatible = "rockchip,rk3288-dp-phy"; - clocks = <&cru SCLK_EDP_24M>; - clock-names = "24m"; - #phy-cells = <0>; - }; -}; diff --git a/dts/Bindings/phy/rockchip-inno-csi-dphy.yaml b/dts/Bindings/phy/rockchip-inno-csi-dphy.yaml index 0e6505e9da..5ac994b3c0 100644 --- a/dts/Bindings/phy/rockchip-inno-csi-dphy.yaml +++ b/dts/Bindings/phy/rockchip-inno-csi-dphy.yaml @@ -10,7 +10,7 @@ maintainers: - Heiko Stuebner <heiko@sntech.de> description: | - The Rockchip SoC has a MIPI CSI D-PHY based on an Innosilicon IP wich + The Rockchip SoC has a MIPI CSI D-PHY based on an Innosilicon IP which connects to the ISP1 (Image Signal Processing unit v1.0) for CSI cameras. properties: diff --git a/dts/Bindings/phy/samsung,dp-video-phy.yaml b/dts/Bindings/phy/samsung,dp-video-phy.yaml index b03b2f00cc..3bee3f8733 100644 --- a/dts/Bindings/phy/samsung,dp-video-phy.yaml +++ b/dts/Bindings/phy/samsung,dp-video-phy.yaml @@ -22,13 +22,13 @@ properties: samsung,pmu-syscon: $ref: /schemas/types.yaml#/definitions/phandle + deprecated: true description: - Phandle to PMU system controller interface. + Phandle to PMU system controller interface (if not a child of PMU). required: - compatible - "#phy-cells" - - samsung,pmu-syscon additionalProperties: false @@ -36,6 +36,5 @@ examples: - | phy { compatible = "samsung,exynos5420-dp-video-phy"; - samsung,pmu-syscon = <&pmu_system_controller>; #phy-cells = <0>; }; diff --git a/dts/Bindings/phy/samsung,exynos-pcie-phy.yaml b/dts/Bindings/phy/samsung,exynos-pcie-phy.yaml index 28e299a960..41df8bb08f 100644 --- a/dts/Bindings/phy/samsung,exynos-pcie-phy.yaml +++ b/dts/Bindings/phy/samsung,exynos-pcie-phy.yaml @@ -21,12 +21,12 @@ properties: maxItems: 1 samsung,pmu-syscon: - $ref: '/schemas/types.yaml#/definitions/phandle' + $ref: /schemas/types.yaml#/definitions/phandle description: phandle for PMU system controller interface, used to control PMU registers bits for PCIe PHY samsung,fsys-sysreg: - $ref: '/schemas/types.yaml#/definitions/phandle' + $ref: /schemas/types.yaml#/definitions/phandle description: phandle for FSYS sysreg interface, used to control sysreg registers bits for PCIe PHY diff --git a/dts/Bindings/phy/samsung,mipi-video-phy.yaml b/dts/Bindings/phy/samsung,mipi-video-phy.yaml index 415440aaad..b2250e4a6b 100644 --- a/dts/Bindings/phy/samsung,mipi-video-phy.yaml +++ b/dts/Bindings/phy/samsung,mipi-video-phy.yaml @@ -35,15 +35,18 @@ properties: syscon: $ref: /schemas/types.yaml#/definitions/phandle + deprecated: true description: Phandle to PMU system controller interface, valid only for - samsung,s5pv210-mipi-video-phy and samsung,exynos5420-mipi-video-phy. + samsung,s5pv210-mipi-video-phy and samsung,exynos5420-mipi-video-phy (if + not a child of PMU). samsung,pmu-syscon: $ref: /schemas/types.yaml#/definitions/phandle + deprecated: true description: Phandle to PMU system controller interface, valid for - samsung,exynos5433-mipi-video-phy. + samsung,exynos5433-mipi-video-phy (if not a child of PMU). samsung,disp-sysreg: $ref: /schemas/types.yaml#/definitions/phandle @@ -81,13 +84,10 @@ allOf: samsung,disp-sysreg: false samsung,cam0-sysreg: false samsung,cam1-sysreg: false - required: - - syscon else: properties: syscon: false required: - - samsung,pmu-syscon - samsung,disp-sysreg - samsung,cam0-sysreg - samsung,cam1-sysreg @@ -99,7 +99,6 @@ examples: phy { compatible = "samsung,exynos5433-mipi-video-phy"; #phy-cells = <1>; - samsung,pmu-syscon = <&pmu_system_controller>; samsung,cam0-sysreg = <&syscon_cam0>; samsung,cam1-sysreg = <&syscon_cam1>; samsung,disp-sysreg = <&syscon_disp>; diff --git a/dts/Bindings/phy/samsung,ufs-phy.yaml b/dts/Bindings/phy/samsung,ufs-phy.yaml index c5dbb91ac4..782f975b43 100644 --- a/dts/Bindings/phy/samsung,ufs-phy.yaml +++ b/dts/Bindings/phy/samsung,ufs-phy.yaml @@ -35,7 +35,7 @@ properties: maxItems: 4 samsung,pmu-syscon: - $ref: '/schemas/types.yaml#/definitions/phandle-array' + $ref: /schemas/types.yaml#/definitions/phandle-array maxItems: 1 items: minItems: 1 diff --git a/dts/Bindings/phy/samsung,usb3-drd-phy.yaml b/dts/Bindings/phy/samsung,usb3-drd-phy.yaml index 5ba55f9f20..452e584d98 100644 --- a/dts/Bindings/phy/samsung,usb3-drd-phy.yaml +++ b/dts/Bindings/phy/samsung,usb3-drd-phy.yaml @@ -29,6 +29,7 @@ properties: - samsung,exynos5420-usbdrd-phy - samsung,exynos5433-usbdrd-phy - samsung,exynos7-usbdrd-phy + - samsung,exynos850-usbdrd-phy clocks: minItems: 2 diff --git a/dts/Bindings/phy/socionext,uniphier-ahci-phy.yaml b/dts/Bindings/phy/socionext,uniphier-ahci-phy.yaml index a3cd45acea..de3cffc850 100644 --- a/dts/Bindings/phy/socionext,uniphier-ahci-phy.yaml +++ b/dts/Bindings/phy/socionext,uniphier-ahci-phy.yaml @@ -117,20 +117,12 @@ additionalProperties: false examples: - | - ahci-glue@65700000 { - compatible = "socionext,uniphier-pxs3-ahci-glue", - "simple-mfd"; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0 0x65700000 0x100>; - - ahci_phy: phy@10 { - compatible = "socionext,uniphier-pxs3-ahci-phy"; - reg = <0x10 0x10>; - #phy-cells = <0>; - clock-names = "link", "phy"; - clocks = <&sys_clk 28>, <&sys_clk 30>; - reset-names = "link", "phy"; - resets = <&sys_rst 28>, <&sys_rst 30>; - }; + ahci_phy: phy@10 { + compatible = "socionext,uniphier-pxs3-ahci-phy"; + reg = <0x10 0x10>; + #phy-cells = <0>; + clock-names = "link", "phy"; + clocks = <&sys_clk 28>, <&sys_clk 30>; + reset-names = "link", "phy"; + resets = <&sys_rst 28>, <&sys_rst 30>; }; diff --git a/dts/Bindings/phy/socionext,uniphier-usb2-phy.yaml b/dts/Bindings/phy/socionext,uniphier-usb2-phy.yaml index 63dab914a4..19522c54f4 100644 --- a/dts/Bindings/phy/socionext,uniphier-usb2-phy.yaml +++ b/dts/Bindings/phy/socionext,uniphier-usb2-phy.yaml @@ -61,28 +61,23 @@ examples: - | // The UniPhier usb2-phy should be a subnode of a "syscon" compatible node. - soc-glue@5f800000 { - compatible = "socionext,uniphier-ld11-soc-glue", "simple-mfd", "syscon"; - reg = <0x5f800000 0x2000>; - - usb-controller { - compatible = "socionext,uniphier-ld11-usb2-phy"; - #address-cells = <1>; - #size-cells = <0>; - - usb_phy0: phy@0 { - reg = <0>; - #phy-cells = <0>; - }; - - usb_phy1: phy@1 { - reg = <1>; - #phy-cells = <0>; - }; - - usb_phy2: phy@2 { - reg = <2>; - #phy-cells = <0>; - }; + usb-hub { + compatible = "socionext,uniphier-ld11-usb2-phy"; + #address-cells = <1>; + #size-cells = <0>; + + usb_phy0: phy@0 { + reg = <0>; + #phy-cells = <0>; + }; + + usb_phy1: phy@1 { + reg = <1>; + #phy-cells = <0>; + }; + + usb_phy2: phy@2 { + reg = <2>; + #phy-cells = <0>; }; }; diff --git a/dts/Bindings/phy/socionext,uniphier-usb3hs-phy.yaml b/dts/Bindings/phy/socionext,uniphier-usb3hs-phy.yaml index 21e4414eea..2107d98ace 100644 --- a/dts/Bindings/phy/socionext,uniphier-usb3hs-phy.yaml +++ b/dts/Bindings/phy/socionext,uniphier-usb3hs-phy.yaml @@ -146,22 +146,15 @@ additionalProperties: false examples: - | - usb-glue@65b00000 { - compatible = "socionext,uniphier-ld20-dwc3-glue", "simple-mfd"; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0 0x65b00000 0x400>; - - usb_hsphy0: hs-phy@200 { - compatible = "socionext,uniphier-ld20-usb3-hsphy"; - reg = <0x200 0x10>; - #phy-cells = <0>; - clock-names = "link", "phy"; - clocks = <&sys_clk 14>, <&sys_clk 16>; - reset-names = "link", "phy"; - resets = <&sys_rst 14>, <&sys_rst 16>; - vbus-supply = <&usb_vbus0>; - nvmem-cell-names = "rterm", "sel_t", "hs_i"; - nvmem-cells = <&usb_rterm0>, <&usb_sel_t0>, <&usb_hs_i0>; - }; + usb_hsphy0: phy@200 { + compatible = "socionext,uniphier-ld20-usb3-hsphy"; + reg = <0x200 0x10>; + #phy-cells = <0>; + clock-names = "link", "phy"; + clocks = <&sys_clk 14>, <&sys_clk 16>; + reset-names = "link", "phy"; + resets = <&sys_rst 14>, <&sys_rst 16>; + vbus-supply = <&usb_vbus0>; + nvmem-cell-names = "rterm", "sel_t", "hs_i"; + nvmem-cells = <&usb_rterm0>, <&usb_sel_t0>, <&usb_hs_i0>; }; diff --git a/dts/Bindings/phy/socionext,uniphier-usb3ss-phy.yaml b/dts/Bindings/phy/socionext,uniphier-usb3ss-phy.yaml index 4c26d2d230..8f5aa6238b 100644 --- a/dts/Bindings/phy/socionext,uniphier-usb3ss-phy.yaml +++ b/dts/Bindings/phy/socionext,uniphier-usb3ss-phy.yaml @@ -131,21 +131,13 @@ additionalProperties: false examples: - | - usb-glue@65b00000 { - compatible = "socionext,uniphier-ld20-dwc3-glue", - "simple-mfd"; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0 0x65b00000 0x400>; - - usb_ssphy0: ss-phy@300 { - compatible = "socionext,uniphier-ld20-usb3-ssphy"; - reg = <0x300 0x10>; - #phy-cells = <0>; - clock-names = "link", "phy"; - clocks = <&sys_clk 14>, <&sys_clk 16>; - reset-names = "link", "phy"; - resets = <&sys_rst 14>, <&sys_rst 16>; - vbus-supply = <&usb_vbus0>; - }; + usb_ssphy0: phy@300 { + compatible = "socionext,uniphier-ld20-usb3-ssphy"; + reg = <0x300 0x10>; + #phy-cells = <0>; + clock-names = "link", "phy"; + clocks = <&sys_clk 14>, <&sys_clk 16>; + reset-names = "link", "phy"; + resets = <&sys_rst 14>, <&sys_rst 16>; + vbus-supply = <&usb_vbus0>; }; diff --git a/dts/Bindings/phy/st,stih407-usb2-phy.yaml b/dts/Bindings/phy/st,stih407-usb2-phy.yaml new file mode 100644 index 0000000000..e45cdd98aa --- /dev/null +++ b/dts/Bindings/phy/st,stih407-usb2-phy.yaml @@ -0,0 +1,63 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/phy/st,stih407-usb2-phy.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: STMicroelectronics STiH407 USB PHY controller + +maintainers: + - Patrice Chotard <patrice.chotard@foss.st.com> + +description: + The USB picoPHY device is the PHY for both USB2 and USB3 host controllers + (when controlling usb2/1.1 devices) available on STiH407 SoC family from + STMicroelectronics. + +properties: + compatible: + const: st,stih407-usb2-phy + + st,syscfg: + description: Phandle to the syscfg bank + $ref: /schemas/types.yaml#/definitions/phandle-array + items: + - items: + - description: phandle to syscfg + - description: phyparam register offset + - description: phyctrl register offset + + resets: + items: + - description: Phandle and reset specifier pair for the whole phy. + - description: Phandle and reset specifier pair for the port. + + reset-names: + items: + - const: global + - const: port + + "#phy-cells": + const: 0 + +required: + - compatible + - st,syscfg + - resets + - reset-names + - "#phy-cells" + +additionalProperties: false + +examples: + - | + #include <dt-bindings/reset/stih407-resets.h> + usb-phy { + compatible = "st,stih407-usb2-phy"; + #phy-cells = <0>; + st,syscfg = <&syscfg_core 0x100 0xf4>; + resets = <&softreset STIH407_PICOPHY_SOFTRESET>, + <&picophyreset STIH407_PICOPHY0_RESET>; + reset-names = "global", "port"; + }; +... diff --git a/dts/Bindings/phy/starfive,jh7110-dphy-rx.yaml b/dts/Bindings/phy/starfive,jh7110-dphy-rx.yaml new file mode 100644 index 0000000000..7224cde6fc --- /dev/null +++ b/dts/Bindings/phy/starfive,jh7110-dphy-rx.yaml @@ -0,0 +1,71 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/phy/starfive,jh7110-dphy-rx.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: StarFive SoC JH7110 MIPI D-PHY Rx Controller + +maintainers: + - Jack Zhu <jack.zhu@starfivetech.com> + - Changhuang Liang <changhuang.liang@starfivetech.com> + +description: + StarFive SoCs contain a MIPI CSI D-PHY based on M31 IP, used to + transfer CSI camera data. + +properties: + compatible: + const: starfive,jh7110-dphy-rx + + reg: + maxItems: 1 + + clocks: + items: + - description: config clock + - description: reference clock + - description: escape mode transmit clock + + clock-names: + items: + - const: cfg + - const: ref + - const: tx + + resets: + items: + - description: DPHY_HW reset + - description: DPHY_B09_ALWAYS_ON reset + + power-domains: + maxItems: 1 + + "#phy-cells": + const: 0 + +required: + - compatible + - reg + - clocks + - clock-names + - resets + - power-domains + - "#phy-cells" + +additionalProperties: false + +examples: + - | + phy@19820000 { + compatible = "starfive,jh7110-dphy-rx"; + reg = <0x19820000 0x10000>; + clocks = <&ispcrg 3>, + <&ispcrg 4>, + <&ispcrg 5>; + clock-names = "cfg", "ref", "tx"; + resets = <&ispcrg 2>, + <&ispcrg 3>; + power-domains = <&aon_syscon 1>; + #phy-cells = <0>; + }; diff --git a/dts/Bindings/phy/starfive,jh7110-pcie-phy.yaml b/dts/Bindings/phy/starfive,jh7110-pcie-phy.yaml new file mode 100644 index 0000000000..2e83a6164c --- /dev/null +++ b/dts/Bindings/phy/starfive,jh7110-pcie-phy.yaml @@ -0,0 +1,58 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/phy/starfive,jh7110-pcie-phy.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: StarFive JH7110 PCIe 2.0 PHY + +maintainers: + - Minda Chen <minda.chen@starfivetech.com> + +properties: + compatible: + const: starfive,jh7110-pcie-phy + + reg: + maxItems: 1 + + "#phy-cells": + const: 0 + + starfive,sys-syscon: + $ref: /schemas/types.yaml#/definitions/phandle-array + items: + - items: + - description: phandle to System Register Controller sys_syscon node. + - description: PHY connect offset of SYS_SYSCONSAIF__SYSCFG register for USB PHY. + description: + The phandle to System Register Controller syscon node and the PHY connect offset + of SYS_SYSCONSAIF__SYSCFG register. Connect PHY to USB3 controller. + + starfive,stg-syscon: + $ref: /schemas/types.yaml#/definitions/phandle-array + items: + - items: + - description: phandle to System Register Controller stg_syscon node. + - description: PHY mode offset of STG_SYSCONSAIF__SYSCFG register. + - description: PHY enable for USB offset of STG_SYSCONSAIF__SYSCFG register. + description: + The phandle to System Register Controller syscon node and the offset + of STG_SYSCONSAIF__SYSCFG register for PCIe PHY. Total 2 regsisters offset. + +required: + - compatible + - reg + - "#phy-cells" + +additionalProperties: false + +examples: + - | + phy@10210000 { + compatible = "starfive,jh7110-pcie-phy"; + reg = <0x10210000 0x10000>; + #phy-cells = <0>; + starfive,sys-syscon = <&sys_syscon 0x18>; + starfive,stg-syscon = <&stg_syscon 0x148 0x1f4>; + }; diff --git a/dts/Bindings/phy/starfive,jh7110-usb-phy.yaml b/dts/Bindings/phy/starfive,jh7110-usb-phy.yaml new file mode 100644 index 0000000000..269e9f9f12 --- /dev/null +++ b/dts/Bindings/phy/starfive,jh7110-usb-phy.yaml @@ -0,0 +1,50 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/phy/starfive,jh7110-usb-phy.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: StarFive JH7110 USB 2.0 PHY + +maintainers: + - Minda Chen <minda.chen@starfivetech.com> + +properties: + compatible: + const: starfive,jh7110-usb-phy + + reg: + maxItems: 1 + + "#phy-cells": + const: 0 + + clocks: + items: + - description: PHY 125m + - description: app 125m + + clock-names: + items: + - const: 125m + - const: app_125m + +required: + - compatible + - reg + - clocks + - clock-names + - "#phy-cells" + +additionalProperties: false + +examples: + - | + phy@10200000 { + compatible = "starfive,jh7110-usb-phy"; + reg = <0x10200000 0x10000>; + clocks = <&syscrg 95>, + <&stgcrg 6>; + clock-names = "125m", "app_125m"; + #phy-cells = <0>; + }; diff --git a/dts/Bindings/phy/sunplus,sp7021-usb2-phy.yaml b/dts/Bindings/phy/sunplus,sp7021-usb2-phy.yaml index 069d422775..57914f214e 100644 --- a/dts/Bindings/phy/sunplus,sp7021-usb2-phy.yaml +++ b/dts/Bindings/phy/sunplus,sp7021-usb2-phy.yaml @@ -2,8 +2,8 @@ # Copyright (C) Sunplus Co., Ltd. 2021 %YAML 1.2 --- -$id: "http://devicetree.org/schemas/phy/sunplus,sp7021-usb2-phy.yaml#" -$schema: "http://devicetree.org/meta-schemas/core.yaml#" +$id: http://devicetree.org/schemas/phy/sunplus,sp7021-usb2-phy.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# title: Sunplus SP7021 USB 2.0 PHY Controller diff --git a/dts/Bindings/phy/ti,phy-am654-serdes.yaml b/dts/Bindings/phy/ti,phy-am654-serdes.yaml index 738c92bb75..854e554eae 100644 --- a/dts/Bindings/phy/ti,phy-am654-serdes.yaml +++ b/dts/Bindings/phy/ti,phy-am654-serdes.yaml @@ -34,11 +34,6 @@ properties: Three input clocks referring to left input reference clock, refclk and right input reference clock. - assigned-clocks: - $ref: "/schemas/types.yaml#/definitions/phandle-array" - assigned-clock-parents: - $ref: "/schemas/types.yaml#/definitions/phandle-array" - '#phy-cells': const: 2 description: diff --git a/dts/Bindings/phy/ti,phy-gmii-sel.yaml b/dts/Bindings/phy/ti,phy-gmii-sel.yaml index 6d46f57fa1..be41b4547e 100644 --- a/dts/Bindings/phy/ti,phy-gmii-sel.yaml +++ b/dts/Bindings/phy/ti,phy-gmii-sel.yaml @@ -2,8 +2,8 @@ # Copyright (C) 2020 Texas Instruments Incorporated - http://www.ti.com/ %YAML 1.2 --- -$id: "http://devicetree.org/schemas/phy/ti,phy-gmii-sel.yaml#" -$schema: "http://devicetree.org/meta-schemas/core.yaml#" +$id: http://devicetree.org/schemas/phy/ti,phy-gmii-sel.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# title: CPSW Port's Interface Mode Selection PHY @@ -55,6 +55,7 @@ properties: - ti,am654-phy-gmii-sel - ti,j7200-cpsw5g-phy-gmii-sel - ti,j721e-cpsw9g-phy-gmii-sel + - ti,j784s4-cpsw9g-phy-gmii-sel reg: maxItems: 1 @@ -87,6 +88,7 @@ allOf: - ti,am654-phy-gmii-sel - ti,j7200-cpsw5g-phy-gmii-sel - ti,j721e-cpsw9g-phy-gmii-sel + - ti,j784s4-cpsw9g-phy-gmii-sel then: properties: '#phy-cells': @@ -113,6 +115,7 @@ allOf: contains: enum: - ti,j721e-cpsw9g-phy-gmii-sel + - ti,j784s4-cpsw9g-phy-gmii-sel then: properties: ti,qsgmii-main-ports: @@ -130,6 +133,7 @@ allOf: enum: - ti,j7200-cpsw5g-phy-gmii-sel - ti,j721e-cpsw9g-phy-gmii-sel + - ti,j784s4-cpsw9g-phy-gmii-sel then: properties: ti,qsgmii-main-ports: false diff --git a/dts/Bindings/phy/ti,phy-j721e-wiz.yaml b/dts/Bindings/phy/ti,phy-j721e-wiz.yaml index c54b36c104..3f16ff1448 100644 --- a/dts/Bindings/phy/ti,phy-j721e-wiz.yaml +++ b/dts/Bindings/phy/ti,phy-j721e-wiz.yaml @@ -2,8 +2,8 @@ # Copyright (C) 2019 Texas Instruments Incorporated - http://www.ti.com/ %YAML 1.2 --- -$id: "http://devicetree.org/schemas/phy/ti,phy-j721e-wiz.yaml#" -$schema: "http://devicetree.org/meta-schemas/core.yaml#" +$id: http://devicetree.org/schemas/phy/ti,phy-j721e-wiz.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# title: TI J721E WIZ (SERDES Wrapper) @@ -54,24 +54,12 @@ properties: ranges: true - assigned-clocks: - minItems: 1 - maxItems: 2 - - assigned-clock-parents: - minItems: 1 - maxItems: 2 - - assigned-clock-rates: - minItems: 1 - maxItems: 2 - typec-dir-gpios: maxItems: 1 description: GPIO to signal Type-C cable orientation for lane swap. If GPIO is active, lane 0 and lane 1 of SERDES will be swapped to - achieve the funtionality of an external type-C plug flip mux. + achieve the functionality of an external type-C plug flip mux. typec-dir-debounce-ms: minimum: 100 @@ -101,6 +89,9 @@ properties: "#clock-cells": const: 0 + clock-output-names: + maxItems: 1 + assigned-clocks: maxItems: 1 @@ -134,6 +125,9 @@ patternProperties: "#clock-cells": const: 0 + clock-output-names: + maxItems: 1 + assigned-clocks: maxItems: 1 @@ -162,6 +156,9 @@ patternProperties: "#clock-cells": const: 0 + clock-output-names: + maxItems: 1 + required: - clocks - "#clock-cells" diff --git a/dts/Bindings/phy/ti,tcan104x-can.yaml b/dts/Bindings/phy/ti,tcan104x-can.yaml index 02b76f15e7..79dad3e89a 100644 --- a/dts/Bindings/phy/ti,tcan104x-can.yaml +++ b/dts/Bindings/phy/ti,tcan104x-can.yaml @@ -1,8 +1,8 @@ # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) %YAML 1.2 --- -$id: "http://devicetree.org/schemas/phy/ti,tcan104x-can.yaml#" -$schema: "http://devicetree.org/meta-schemas/core.yaml#" +$id: http://devicetree.org/schemas/phy/ti,tcan104x-can.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# title: TCAN104x CAN TRANSCEIVER PHY @@ -15,6 +15,7 @@ properties: compatible: enum: + - nxp,tjr1443 - ti,tcan1042 - ti,tcan1043 diff --git a/dts/Bindings/phy/ti-phy.txt b/dts/Bindings/phy/ti-phy.txt index 60c9d0ac75..7c7936b89f 100644 --- a/dts/Bindings/phy/ti-phy.txt +++ b/dts/Bindings/phy/ti-phy.txt @@ -62,7 +62,7 @@ Deprecated properties: - ctrl-module : phandle of the control module used by PHY driver to power on the PHY. -Recommended properies: +Recommended properties: - syscon-phy-power : phandle/offset pair. Phandle to the system control module and the register offset to power on/off the PHY. |