diff options
Diffstat (limited to 'dts/Bindings/phy')
32 files changed, 1549 insertions, 717 deletions
diff --git a/dts/Bindings/phy/amlogic,meson-axg-mipi-pcie-analog.yaml b/dts/Bindings/phy/amlogic,meson-axg-mipi-pcie-analog.yaml index 88683db6cf..18c1ec5e19 100644 --- a/dts/Bindings/phy/amlogic,meson-axg-mipi-pcie-analog.yaml +++ b/dts/Bindings/phy/amlogic,meson-axg-mipi-pcie-analog.yaml @@ -30,6 +30,6 @@ examples: - | mpphy: phy@0 { compatible = "amlogic,axg-mipi-pcie-analog-phy"; - reg = <0x0 0x0 0x0 0xc>; + reg = <0x0 0xc>; #phy-cells = <1>; }; diff --git a/dts/Bindings/phy/amlogic,meson-axg-pcie.yaml b/dts/Bindings/phy/amlogic,meson-axg-pcie.yaml index 086478aec9..45f3d72b1c 100644 --- a/dts/Bindings/phy/amlogic,meson-axg-pcie.yaml +++ b/dts/Bindings/phy/amlogic,meson-axg-pcie.yaml @@ -44,7 +44,7 @@ examples: #include <dt-bindings/phy/phy.h> pcie_phy: pcie-phy@ff644000 { compatible = "amlogic,axg-pcie-phy"; - reg = <0x0 0xff644000 0x0 0x1c>; + reg = <0xff644000 0x1c>; resets = <&reset RESET_PCIE_PHY>; phys = <&mipi_analog_phy PHY_TYPE_PCIE>; phy-names = "analog"; diff --git a/dts/Bindings/phy/amlogic,meson8b-usb2-phy.yaml b/dts/Bindings/phy/amlogic,meson8b-usb2-phy.yaml new file mode 100644 index 0000000000..03c4809dbe --- /dev/null +++ b/dts/Bindings/phy/amlogic,meson8b-usb2-phy.yaml @@ -0,0 +1,64 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/phy/amlogic,meson8b-usb2-phy.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: Amlogic Meson8, Meson8b, Meson8m2 and GXBB USB2 PHY + +maintainers: + - Martin Blumenstingl <martin.blumenstingl@googlemail.com> + +properties: + compatible: + oneOf: + - items: + - enum: + - amlogic,meson8-usb2-phy + - amlogic,meson8b-usb2-phy + - amlogic,meson8m2-usb2-phy + - const: amlogic,meson-mx-usb2-phy + - const: amlogic,meson-gxbb-usb2-phy + + reg: + maxItems: 1 + + clocks: + minItems: 2 + + clock-names: + items: + - const: usb_general + - const: usb + + resets: + minItems: 1 + + "#phy-cells": + const: 0 + + phy-supply: + description: + Phandle to a regulator that provides power to the PHY. This + regulator will be managed during the PHY power on/off sequence. + +required: + - compatible + - reg + - clocks + - clock-names + - "#phy-cells" + +additionalProperties: false + +examples: + - | + usb-phy@c0000000 { + compatible = "amlogic,meson-gxbb-usb2-phy"; + reg = <0xc0000000 0x20>; + resets = <&reset_usb_phy>; + clocks = <&clk_usb_general>, <&reset_usb>; + clock-names = "usb_general", "usb"; + phy-supply = <&usb_vbus>; + #phy-cells = <0>; + }; diff --git a/dts/Bindings/phy/calxeda-combophy.txt b/dts/Bindings/phy/calxeda-combophy.txt deleted file mode 100644 index 6622bdb2e8..0000000000 --- a/dts/Bindings/phy/calxeda-combophy.txt +++ /dev/null @@ -1,17 +0,0 @@ -Calxeda Highbank Combination Phys for SATA - -Properties: -- compatible : Should be "calxeda,hb-combophy" -- #phy-cells: Should be 1. -- reg : Address and size for Combination Phy registers. -- phydev: device ID for programming the combophy. - -Example: - - combophy5: combo-phy@fff5d000 { - compatible = "calxeda,hb-combophy"; - #phy-cells = <1>; - reg = <0xfff5d000 0x1000>; - phydev = <31>; - }; - diff --git a/dts/Bindings/phy/calxeda-combophy.yaml b/dts/Bindings/phy/calxeda-combophy.yaml new file mode 100644 index 0000000000..41ee16e21f --- /dev/null +++ b/dts/Bindings/phy/calxeda-combophy.yaml @@ -0,0 +1,50 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/phy/calxeda-combophy.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Calxeda Highbank Combination PHYs binding for SATA + +description: | + The Calxeda Combination PHYs connect the SoC to the internal fabric + and to SATA connectors. The PHYs support multiple protocols (SATA, + SGMII, PCIe) and can be assigned to different devices (SATA or XGMAC + controller). + Programming the PHYs is typically handled by those device drivers, + not by a dedicated PHY driver. + +maintainers: + - Andre Przywara <andre.przywara@arm.com> + +properties: + compatible: + const: calxeda,hb-combophy + + '#phy-cells': + const: 1 + + reg: + maxItems: 1 + + phydev: + description: device ID for programming the ComboPHY. + $ref: /schemas/types.yaml#/definitions/uint32 + maximum: 31 + +required: + - compatible + - reg + - phydev + - '#phy-cells' + +additionalProperties: false + +examples: + - | + combophy5: combo-phy@fff5d000 { + compatible = "calxeda,hb-combophy"; + #phy-cells = <1>; + reg = <0xfff5d000 0x1000>; + phydev = <31>; + }; diff --git a/dts/Bindings/phy/cdns,salvo-phy.yaml b/dts/Bindings/phy/cdns,salvo-phy.yaml new file mode 100644 index 0000000000..3a07285b54 --- /dev/null +++ b/dts/Bindings/phy/cdns,salvo-phy.yaml @@ -0,0 +1,52 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +# Copyright (c) 2020 NXP +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/phy/cdns,salvo-phy.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: Cadence SALVO PHY + +maintainers: + - Peter Chen <peter.chen@nxp.com> + +properties: + compatible: + enum: + - nxp,salvo-phy + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + + clock-names: + items: + - const: salvo_phy_clk + + power-domains: + maxItems: 1 + + "#phy-cells": + const: 0 + +required: + - compatible + - reg + - "#phy-cells" + +additionalProperties: false + +examples: + - | + #include <dt-bindings/firmware/imx/rsrc.h> + + usb3phy: usb3-phy@5b160000 { + compatible = "nxp,salvo-phy"; + reg = <0x5b160000 0x40000>; + clocks = <&usb3_lpcg 4>; + clock-names = "salvo_phy_clk"; + power-domains = <&pd IMX_SC_R_USB_2_PHY>; + #phy-cells = <0>; + }; diff --git a/dts/Bindings/phy/intel,combo-phy.yaml b/dts/Bindings/phy/intel,combo-phy.yaml new file mode 100644 index 0000000000..347d0cdfb8 --- /dev/null +++ b/dts/Bindings/phy/intel,combo-phy.yaml @@ -0,0 +1,101 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/phy/intel,combo-phy.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Intel ComboPhy Subsystem + +maintainers: + - Dilip Kota <eswara.kota@linux.intel.com> + +description: | + Intel Combophy subsystem supports PHYs for PCIe, EMAC and SATA + controllers. A single Combophy provides two PHY instances. + +properties: + $nodename: + pattern: "combophy(@.*|-[0-9a-f])*$" + + compatible: + items: + - const: intel,combophy-lgm + - const: intel,combo-phy + + clocks: + maxItems: 1 + + reg: + items: + - description: ComboPhy core registers + - description: PCIe app core control registers + + reg-names: + items: + - const: core + - const: app + + resets: + maxItems: 4 + + reset-names: + items: + - const: phy + - const: core + - const: iphy0 + - const: iphy1 + + intel,syscfg: + $ref: /schemas/types.yaml#/definitions/phandle-array + description: Chip configuration registers handle and ComboPhy instance id + + intel,hsio: + $ref: /schemas/types.yaml#/definitions/phandle-array + description: HSIO registers handle and ComboPhy instance id on NOC + + intel,aggregation: + type: boolean + description: | + Specify the flag to configure ComboPHY in dual lane mode. + + intel,phy-mode: + $ref: /schemas/types.yaml#/definitions/uint32 + description: | + Mode of the two phys in ComboPhy. + See dt-bindings/phy/phy.h for values. + + "#phy-cells": + const: 1 + +required: + - compatible + - clocks + - reg + - reg-names + - intel,syscfg + - intel,hsio + - intel,phy-mode + - "#phy-cells" + +additionalProperties: false + +examples: + - | + #include <dt-bindings/phy/phy.h> + combophy@d0a00000 { + compatible = "intel,combophy-lgm", "intel,combo-phy"; + clocks = <&cgu0 1>; + #phy-cells = <1>; + reg = <0xd0a00000 0x40000>, + <0xd0a40000 0x1000>; + reg-names = "core", "app"; + resets = <&rcu0 0x50 6>, + <&rcu0 0x50 17>, + <&rcu0 0x50 23>, + <&rcu0 0x50 24>; + reset-names = "phy", "core", "iphy0", "iphy1"; + intel,syscfg = <&sysconf 0>; + intel,hsio = <&hsiol 0>; + intel,phy-mode = <PHY_TYPE_PCIE>; + intel,aggregation; + }; diff --git a/dts/Bindings/phy/intel,lgm-emmc-phy.yaml b/dts/Bindings/phy/intel,lgm-emmc-phy.yaml index 9a346d6290..77bb530991 100644 --- a/dts/Bindings/phy/intel,lgm-emmc-phy.yaml +++ b/dts/Bindings/phy/intel,lgm-emmc-phy.yaml @@ -23,7 +23,7 @@ description: |+ properties: compatible: - const: intel,lgm-emmc-phy + const: intel,lgm-emmc-phy "#phy-cells": const: 0 diff --git a/dts/Bindings/phy/meson-gxl-usb3-phy.txt b/dts/Bindings/phy/meson-gxl-usb3-phy.txt deleted file mode 100644 index 114947e1de..0000000000 --- a/dts/Bindings/phy/meson-gxl-usb3-phy.txt +++ /dev/null @@ -1,31 +0,0 @@ -* Amlogic Meson GXL and GXM USB3 PHY and OTG detection binding - -Required properties: -- compatible: Should be "amlogic,meson-gxl-usb3-phy" -- #phys-cells: must be 0 (see phy-bindings.txt in this directory) -- reg: The base address and length of the registers -- interrupts: the interrupt specifier for the OTG detection -- clocks: phandles to the clocks for - - the USB3 PHY - - and peripheral mode/OTG detection -- clock-names: must contain "phy" and "peripheral" -- resets: phandle to the reset lines for: - - the USB3 PHY and - - peripheral mode/OTG detection -- reset-names: must contain "phy" and "peripheral" - -Optional properties: -- phy-supply: see phy-bindings.txt in this directory - - -Example: - usb3_phy0: phy@78080 { - compatible = "amlogic,meson-gxl-usb3-phy"; - #phy-cells = <0>; - reg = <0x0 0x78080 0x0 0x20>; - interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clkc CLKID_USB_OTG>, <&clkc_AO CLKID_AO_CEC_32K>; - clock-names = "phy", "peripheral"; - resets = <&reset RESET_USB_OTG>, <&reset RESET_USB_OTG>; - reset-names = "phy", "peripheral"; - }; diff --git a/dts/Bindings/phy/meson8b-usb2-phy.txt b/dts/Bindings/phy/meson8b-usb2-phy.txt deleted file mode 100644 index d81d73aea6..0000000000 --- a/dts/Bindings/phy/meson8b-usb2-phy.txt +++ /dev/null @@ -1,28 +0,0 @@ -* Amlogic Meson8, Meson8b and GXBB USB2 PHY - -Required properties: -- compatible: Depending on the platform this should be one of: - "amlogic,meson8-usb2-phy" - "amlogic,meson8b-usb2-phy" - "amlogic,meson-gxbb-usb2-phy" -- reg: The base address and length of the registers -- #phys-cells: should be 0 (see phy-bindings.txt in this directory) -- clocks: phandle and clock identifier for the phy clocks -- clock-names: "usb_general" and "usb" - -Optional properties: -- resets: reference to the reset controller -- phy-supply: see phy-bindings.txt in this directory - - -Example: - -usb0_phy: usb-phy@c0000000 { - compatible = "amlogic,meson-gxbb-usb2-phy"; - #phy-cells = <0>; - reg = <0x0 0xc0000000 0x0 0x20>; - resets = <&reset RESET_USB_OTG>; - clocks = <&clkc CLKID_USB>, <&clkc CLKID_USB0>; - clock-names = "usb_general", "usb"; - phy-supply = <&usb_vbus>; -}; diff --git a/dts/Bindings/phy/phy-cadence-torrent.yaml b/dts/Bindings/phy/phy-cadence-torrent.yaml index c779a3c7d8..4071438be2 100644 --- a/dts/Bindings/phy/phy-cadence-torrent.yaml +++ b/dts/Bindings/phy/phy-cadence-torrent.yaml @@ -77,24 +77,21 @@ patternProperties: description: Specifies the type of PHY for which the group of PHY lanes is used. Refer include/dt-bindings/phy/phy.h. Constants from the header should be used. - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - - enum: [1, 2, 3, 4, 5, 6] + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [1, 2, 3, 4, 5, 6] cdns,num-lanes: description: Number of DisplayPort lanes. - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - - enum: [1, 2, 4] + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [1, 2, 4] default: 4 cdns,max-bit-rate: description: Maximum DisplayPort link bit rate to use, in Mbps - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - - enum: [2160, 2430, 2700, 3240, 4320, 5400, 8100] + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [2160, 2430, 2700, 3240, 4320, 5400, 8100] default: 8100 required: @@ -120,24 +117,30 @@ additionalProperties: false examples: - | #include <dt-bindings/phy/phy.h> - torrent_phy: torrent-phy@f0fb500000 { - compatible = "cdns,torrent-phy"; - reg = <0xf0 0xfb500000 0x0 0x00100000>, - <0xf0 0xfb030a00 0x0 0x00000040>; - reg-names = "torrent_phy", "dptx_phy"; - resets = <&phyrst 0>; - clocks = <&ref_clk>; - clock-names = "refclk"; - #address-cells = <1>; - #size-cells = <0>; - torrent_phy_dp: phy@0 { - reg = <0>; - resets = <&phyrst 1>, <&phyrst 2>, - <&phyrst 3>, <&phyrst 4>; - #phy-cells = <0>; - cdns,phy-type = <PHY_TYPE_DP>; - cdns,num-lanes = <4>; - cdns,max-bit-rate = <8100>; - }; + + bus { + #address-cells = <2>; + #size-cells = <2>; + + torrent-phy@f0fb500000 { + compatible = "cdns,torrent-phy"; + reg = <0xf0 0xfb500000 0x0 0x00100000>, + <0xf0 0xfb030a00 0x0 0x00000040>; + reg-names = "torrent_phy", "dptx_phy"; + resets = <&phyrst 0>; + clocks = <&ref_clk>; + clock-names = "refclk"; + #address-cells = <1>; + #size-cells = <0>; + phy@0 { + reg = <0>; + resets = <&phyrst 1>, <&phyrst 2>, + <&phyrst 3>, <&phyrst 4>; + #phy-cells = <0>; + cdns,phy-type = <PHY_TYPE_DP>; + cdns,num-lanes = <4>; + cdns,max-bit-rate = <8100>; + }; + }; }; ... diff --git a/dts/Bindings/phy/qcom,qmp-phy.yaml b/dts/Bindings/phy/qcom,qmp-phy.yaml new file mode 100644 index 0000000000..f80f8896d5 --- /dev/null +++ b/dts/Bindings/phy/qcom,qmp-phy.yaml @@ -0,0 +1,317 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) + +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/phy/qcom,qmp-phy.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: Qualcomm QMP PHY controller + +maintainers: + - Manu Gautam <mgautam@codeaurora.org> + +description: + QMP phy controller supports physical layer functionality for a number of + controllers on Qualcomm chipsets, such as, PCIe, UFS, and USB. + +properties: + compatible: + enum: + - qcom,ipq8074-qmp-pcie-phy + - qcom,msm8996-qmp-pcie-phy + - qcom,msm8996-qmp-ufs-phy + - qcom,msm8996-qmp-usb3-phy + - qcom,msm8998-qmp-pcie-phy + - qcom,msm8998-qmp-ufs-phy + - qcom,msm8998-qmp-usb3-phy + - qcom,sdm845-qhp-pcie-phy + - qcom,sdm845-qmp-pcie-phy + - qcom,sdm845-qmp-ufs-phy + - qcom,sdm845-qmp-usb3-uni-phy + - qcom,sm8150-qmp-ufs-phy + - qcom,sm8250-qmp-ufs-phy + + reg: + items: + - description: Address and length of PHY's common serdes block. + + "#clock-cells": + enum: [ 1, 2 ] + + "#address-cells": + enum: [ 1, 2 ] + + "#size-cells": + enum: [ 1, 2 ] + + ranges: true + + clocks: + minItems: 1 + maxItems: 4 + + clock-names: + minItems: 1 + maxItems: 4 + + resets: + minItems: 1 + maxItems: 3 + + reset-names: + minItems: 1 + maxItems: 3 + + vdda-phy-supply: + description: + Phandle to a regulator supply to PHY core block. + + vdda-pll-supply: + description: + Phandle to 1.8V regulator supply to PHY refclk pll block. + + vddp-ref-clk-supply: + description: + Phandle to a regulator supply to any specific refclk + pll block. + +#Required nodes: +patternProperties: + "^phy@[0-9a-f]+$": + type: object + description: + Each device node of QMP phy is required to have as many child nodes as + the number of lanes the PHY has. + +required: + - compatible + - reg + - "#clock-cells" + - "#address-cells" + - "#size-cells" + - ranges + - clocks + - clock-names + - resets + - reset-names + - vdda-phy-supply + - vdda-pll-supply + +additionalProperties: false + +allOf: + - if: + properties: + compatible: + contains: + enum: + - qcom,sdm845-qmp-usb3-uni-phy + then: + properties: + clocks: + items: + - description: Phy aux clock. + - description: Phy config clock. + - description: 19.2 MHz ref clk. + - description: Phy common block aux clock. + clock-names: + items: + - const: aux + - const: cfg_ahb + - const: ref + - const: com_aux + resets: + items: + - description: reset of phy block. + - description: phy common block reset. + reset-names: + items: + - const: phy + - const: common + - if: + properties: + compatible: + contains: + enum: + - qcom,msm8996-qmp-pcie-phy + then: + properties: + clocks: + items: + - description: Phy aux clock. + - description: Phy config clock. + - description: 19.2 MHz ref clk. + clock-names: + items: + - const: aux + - const: cfg_ahb + - const: ref + resets: + items: + - description: reset of phy block. + - description: phy common block reset. + - description: phy's ahb cfg block reset. + reset-names: + items: + - const: phy + - const: common + - const: cfg + - if: + properties: + compatible: + contains: + enum: + - qcom,msm8996-qmp-usb3-phy + - qcom,msm8998-qmp-pcie-phy + - qcom,msm8998-qmp-usb3-phy + then: + properties: + clocks: + items: + - description: Phy aux clock. + - description: Phy config clock. + - description: 19.2 MHz ref clk. + clock-names: + items: + - const: aux + - const: cfg_ahb + - const: ref + resets: + items: + - description: reset of phy block. + - description: phy common block reset. + reset-names: + items: + - const: phy + - const: common + - if: + properties: + compatible: + contains: + enum: + - qcom,msm8996-qmp-ufs-phy + then: + properties: + clocks: + items: + - description: 19.2 MHz ref clk. + clock-names: + items: + - const: ref + resets: + items: + - description: PHY reset in the UFS controller. + reset-names: + items: + - const: ufsphy + - if: + properties: + compatible: + contains: + enum: + - qcom,msm8998-qmp-ufs-phy + - qcom,sdm845-qmp-ufs-phy + - qcom,sm8150-qmp-ufs-phy + - qcom,sm8250-qmp-ufs-phy + then: + properties: + clocks: + items: + - description: 19.2 MHz ref clk. + - description: Phy reference aux clock. + clock-names: + items: + - const: ref + - const: ref_aux + resets: + items: + - description: PHY reset in the UFS controller. + reset-names: + items: + - const: ufsphy + - if: + properties: + compatible: + contains: + enum: + - qcom,ipq8074-qmp-pcie-phy + then: + properties: + clocks: + items: + - description: pipe clk. + clock-names: + items: + - const: pipe_clk + resets: + items: + - description: reset of phy block. + - description: phy common block reset. + reset-names: + items: + - const: phy + - const: common + - if: + properties: + compatible: + contains: + enum: + - qcom,sdm845-qhp-pcie-phy + - qcom,sdm845-qmp-pcie-phy + then: + properties: + clocks: + items: + - description: Phy aux clock. + - description: Phy config clock. + - description: 19.2 MHz ref clk. + - description: Phy refgen clk. + clock-names: + items: + - const: aux + - const: cfg_ahb + - const: ref + - const: refgen + resets: + items: + - description: reset of phy block. + reset-names: + items: + - const: phy + +examples: + - | + #include <dt-bindings/clock/qcom,gcc-sdm845.h> + usb_2_qmpphy: phy-wrapper@88eb000 { + compatible = "qcom,sdm845-qmp-usb3-uni-phy"; + reg = <0x088eb000 0x18c>; + #clock-cells = <1>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x088eb000 0x2000>; + + clocks = <&gcc GCC_USB3_SEC_PHY_AUX_CLK >, + <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>, + <&gcc GCC_USB3_SEC_CLKREF_CLK>, + <&gcc GCC_USB3_SEC_PHY_COM_AUX_CLK>; + clock-names = "aux", "cfg_ahb", "ref", "com_aux"; + + resets = <&gcc GCC_USB3PHY_PHY_SEC_BCR>, + <&gcc GCC_USB3_PHY_SEC_BCR>; + reset-names = "phy", "common"; + + vdda-phy-supply = <&vdda_usb2_ss_1p2>; + vdda-pll-supply = <&vdda_usb2_ss_core>; + + usb_2_ssphy: phy@200 { + reg = <0x200 0x128>, + <0x400 0x1fc>, + <0x800 0x218>, + <0x600 0x70>; + #clock-cells = <0>; + #phy-cells = <0>; + clocks = <&gcc GCC_USB3_SEC_PHY_PIPE_CLK>; + clock-names = "pipe0"; + clock-output-names = "usb3_uni_phy_pipe_clk_src"; + }; + }; diff --git a/dts/Bindings/phy/qcom,qmp-usb3-dp-phy.yaml b/dts/Bindings/phy/qcom,qmp-usb3-dp-phy.yaml new file mode 100644 index 0000000000..6e24875014 --- /dev/null +++ b/dts/Bindings/phy/qcom,qmp-usb3-dp-phy.yaml @@ -0,0 +1,140 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) + +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/phy/qcom,qmp-usb3-dp-phy.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: Qualcomm QMP USB3 DP PHY controller + +maintainers: + - Manu Gautam <mgautam@codeaurora.org> + +properties: + compatible: + enum: + - qcom,sc7180-qmp-usb3-phy + - qcom,sdm845-qmp-usb3-phy + reg: + items: + - description: Address and length of PHY's common serdes block. + - description: Address and length of the DP_COM control block. + + reg-names: + items: + - const: reg-base + - const: dp_com + + "#clock-cells": + enum: [ 1, 2 ] + + "#address-cells": + enum: [ 1, 2 ] + + "#size-cells": + enum: [ 1, 2 ] + + ranges: true + + clocks: + items: + - description: Phy aux clock. + - description: Phy config clock. + - description: 19.2 MHz ref clk. + - description: Phy common block aux clock. + + clock-names: + items: + - const: aux + - const: cfg_ahb + - const: ref + - const: com_aux + + resets: + items: + - description: reset of phy block. + - description: phy common block reset. + + reset-names: + items: + - const: phy + - const: common + + vdda-phy-supply: + description: + Phandle to a regulator supply to PHY core block. + + vdda-pll-supply: + description: + Phandle to 1.8V regulator supply to PHY refclk pll block. + + vddp-ref-clk-supply: + description: + Phandle to a regulator supply to any specific refclk + pll block. + +#Required nodes: +patternProperties: + "^phy@[0-9a-f]+$": + type: object + description: + Each device node of QMP phy is required to have as many child nodes as + the number of lanes the PHY has. + +required: + - compatible + - reg + - reg-names + - "#clock-cells" + - "#address-cells" + - "#size-cells" + - ranges + - clocks + - clock-names + - resets + - reset-names + - vdda-phy-supply + - vdda-pll-supply + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/qcom,gcc-sdm845.h> + usb_1_qmpphy: phy-wrapper@88e9000 { + compatible = "qcom,sdm845-qmp-usb3-phy"; + reg = <0x088e9000 0x18c>, + <0x088e8000 0x10>; + reg-names = "reg-base", "dp_com"; + #clock-cells = <1>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x088e9000 0x1000>; + + clocks = <&gcc GCC_USB3_PRIM_PHY_AUX_CLK>, + <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>, + <&gcc GCC_USB3_PRIM_CLKREF_CLK>, + <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>; + clock-names = "aux", "cfg_ahb", "ref", "com_aux"; + + resets = <&gcc GCC_USB3_PHY_PRIM_BCR>, + <&gcc GCC_USB3_DP_PHY_PRIM_BCR>; + reset-names = "phy", "common"; + + vdda-phy-supply = <&vdda_usb2_ss_1p2>; + vdda-pll-supply = <&vdda_usb2_ss_core>; + + phy@200 { + reg = <0x200 0x128>, + <0x400 0x200>, + <0xc00 0x218>, + <0x600 0x128>, + <0x800 0x200>, + <0xa00 0x100>; + #clock-cells = <0>; + #phy-cells = <0>; + clocks = <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>; + clock-names = "pipe0"; + clock-output-names = "usb3_phy_pipe_clk_src"; + }; + }; diff --git a/dts/Bindings/phy/qcom,qusb2-phy.yaml b/dts/Bindings/phy/qcom,qusb2-phy.yaml index f8bd28ff31..b5a6195de7 100644 --- a/dts/Bindings/phy/qcom,qusb2-phy.yaml +++ b/dts/Bindings/phy/qcom,qusb2-phy.yaml @@ -83,31 +83,28 @@ then: It is a 6 bit value that specifies offset to be added to PHY refgen RESCODE via IMP_CTRL1 register. It is a PHY tuning parameter that may vary for different boards of same SOC. - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - - minimum: 0 - maximum: 63 - default: 0 + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 63 + default: 0 qcom,bias-ctrl-value: description: It is a 6 bit value that specifies bias-ctrl-value. It is a PHY tuning parameter that may vary for different boards of same SOC. - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - - minimum: 0 - maximum: 63 - default: 32 + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 63 + default: 32 qcom,charge-ctrl-value: - description: + description: It is a 2 bit value that specifies charge-ctrl-value. It is a PHY tuning parameter that may vary for different boards of same SOC. - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - - minimum: 0 - maximum: 3 - default: 0 + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 3 + default: 0 qcom,hstx-trim-value: description: @@ -115,22 +112,20 @@ then: output current. Possible range is - 15mA to 24mA (stepsize of 600 uA). See dt-bindings/phy/phy-qcom-qusb2.h for applicable values. - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - - minimum: 0 - maximum: 15 - default: 3 + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 15 + default: 3 qcom,preemphasis-level: description: It is a 2 bit value that specifies pre-emphasis level. Possible range is 0 to 15% (stepsize of 5%). See dt-bindings/phy/phy-qcom-qusb2.h for applicable values. - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - - minimum: 0 - maximum: 3 - default: 0 + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 3 + default: 2 qcom,preemphasis-width: description: @@ -138,21 +133,19 @@ then: pre-emphasis (specified using qcom,preemphasis-level) must be in effect. Duration could be half-bit of full-bit. See dt-bindings/phy/phy-qcom-qusb2.h for applicable values. - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - - minimum: 0 - maximum: 1 - default: 0 + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 1 + default: 0 qcom,hsdisc-trim-value: description: It is a 2 bit value tuning parameter that control disconnect threshold and may vary for different boards of same SOC. - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - - minimum: 0 - maximum: 3 - default: 1 + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 3 + default: 0 required: - compatible diff --git a/dts/Bindings/phy/qcom,usb-snps-femto-v2.yaml b/dts/Bindings/phy/qcom,usb-snps-femto-v2.yaml new file mode 100644 index 0000000000..4949a28515 --- /dev/null +++ b/dts/Bindings/phy/qcom,usb-snps-femto-v2.yaml @@ -0,0 +1,80 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/phy/qcom,usb-snps-femto-v2.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: Qualcomm Synopsys Femto High-Speed USB PHY V2 + +maintainers: + - Wesley Cheng <wcheng@codeaurora.org> + +description: | + Qualcomm High-Speed USB PHY + +properties: + compatible: + enum: + - qcom,usb-snps-hs-7nm-phy + - qcom,sm8150-usb-hs-phy + - qcom,usb-snps-femto-v2-phy + + reg: + maxItems: 1 + + "#phy-cells": + const: 0 + + clocks: + items: + - description: rpmhcc ref clock + + clock-names: + items: + - const: ref + + resets: + items: + - description: PHY core reset + + vdda-pll-supply: + description: phandle to the regulator VDD supply node. + + vdda18-supply: + description: phandle to the regulator 1.8V supply node. + + vdda33-supply: + description: phandle to the regulator 3.3V supply node. + +required: + - compatible + - reg + - "#phy-cells" + - clocks + - clock-names + - resets + - vdda-pll-supply + - vdda18-supply + - vdda33-supply + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/qcom,rpmh.h> + #include <dt-bindings/clock/qcom,gcc-sm8150.h> + phy@88e2000 { + compatible = "qcom,sm8150-usb-hs-phy"; + reg = <0x088e2000 0x400>; + #phy-cells = <0>; + + clocks = <&rpmhcc RPMH_CXO_CLK>; + clock-names = "ref"; + + resets = <&gcc GCC_QUSB2PHY_PRIM_BCR>; + + vdda-pll-supply = <&vdd_usb_hs_core>; + vdda33-supply = <&vdda_usb_hs_3p1>; + vdda18-supply = <&vdda_usb_hs_1p8>; + }; +... diff --git a/dts/Bindings/phy/qcom-qmp-phy.txt b/dts/Bindings/phy/qcom-qmp-phy.txt deleted file mode 100644 index 54d6f8d435..0000000000 --- a/dts/Bindings/phy/qcom-qmp-phy.txt +++ /dev/null @@ -1,242 +0,0 @@ -Qualcomm QMP PHY controller -=========================== - -QMP phy controller supports physical layer functionality for a number of -controllers on Qualcomm chipsets, such as, PCIe, UFS, and USB. - -Required properties: - - compatible: compatible list, contains: - "qcom,ipq8074-qmp-pcie-phy" for PCIe phy on IPQ8074 - "qcom,msm8996-qmp-pcie-phy" for 14nm PCIe phy on msm8996, - "qcom,msm8996-qmp-ufs-phy" for 14nm UFS phy on msm8996, - "qcom,msm8996-qmp-usb3-phy" for 14nm USB3 phy on msm8996, - "qcom,msm8998-qmp-usb3-phy" for USB3 QMP V3 phy on msm8998, - "qcom,msm8998-qmp-ufs-phy" for UFS QMP phy on msm8998, - "qcom,msm8998-qmp-pcie-phy" for PCIe QMP phy on msm8998, - "qcom,sdm845-qhp-pcie-phy" for QHP PCIe phy on sdm845, - "qcom,sdm845-qmp-pcie-phy" for QMP PCIe phy on sdm845, - "qcom,sdm845-qmp-usb3-phy" for USB3 QMP V3 phy on sdm845, - "qcom,sdm845-qmp-usb3-uni-phy" for USB3 QMP V3 UNI phy on sdm845, - "qcom,sdm845-qmp-ufs-phy" for UFS QMP phy on sdm845, - "qcom,sm8150-qmp-ufs-phy" for UFS QMP phy on sm8150. - -- reg: - - index 0: address and length of register set for PHY's common - serdes block. - - index 1: address and length of the DP_COM control block (for - "qcom,sdm845-qmp-usb3-phy" only). - -- reg-names: - - For "qcom,sdm845-qmp-usb3-phy": - - Should be: "reg-base", "dp_com" - - For all others: - - The reg-names property shouldn't be defined. - - - #address-cells: must be 1 - - #size-cells: must be 1 - - ranges: must be present - - - clocks: a list of phandles and clock-specifier pairs, - one for each entry in clock-names. - - clock-names: "cfg_ahb" for phy config clock, - "aux" for phy aux clock, - "ref" for 19.2 MHz ref clk, - "com_aux" for phy common block aux clock, - "ref_aux" for phy reference aux clock, - - For "qcom,ipq8074-qmp-pcie-phy": no clocks are listed. - For "qcom,msm8996-qmp-pcie-phy" must contain: - "aux", "cfg_ahb", "ref". - For "qcom,msm8996-qmp-ufs-phy" must contain: - "ref". - For "qcom,msm8996-qmp-usb3-phy" must contain: - "aux", "cfg_ahb", "ref". - For "qcom,msm8998-qmp-usb3-phy" must contain: - "aux", "cfg_ahb", "ref". - For "qcom,msm8998-qmp-ufs-phy" must contain: - "ref", "ref_aux". - For "qcom,msm8998-qmp-pcie-phy" must contain: - "aux", "cfg_ahb", "ref". - For "qcom,sdm845-qhp-pcie-phy" must contain: - "aux", "cfg_ahb", "ref", "refgen". - For "qcom,sdm845-qmp-pcie-phy" must contain: - "aux", "cfg_ahb", "ref", "refgen". - For "qcom,sdm845-qmp-usb3-phy" must contain: - "aux", "cfg_ahb", "ref", "com_aux". - For "qcom,sdm845-qmp-usb3-uni-phy" must contain: - "aux", "cfg_ahb", "ref", "com_aux". - For "qcom,sdm845-qmp-ufs-phy" must contain: - "ref", "ref_aux". - For "qcom,sm8150-qmp-ufs-phy" must contain: - "ref", "ref_aux". - - - resets: a list of phandles and reset controller specifier pairs, - one for each entry in reset-names. - - reset-names: "phy" for reset of phy block, - "common" for phy common block reset, - "cfg" for phy's ahb cfg block reset, - "ufsphy" for the PHY reset in the UFS controller. - - For "qcom,ipq8074-qmp-pcie-phy" must contain: - "phy", "common". - For "qcom,msm8996-qmp-pcie-phy" must contain: - "phy", "common", "cfg". - For "qcom,msm8996-qmp-ufs-phy": must contain: - "ufsphy". - For "qcom,msm8996-qmp-usb3-phy" must contain - "phy", "common". - For "qcom,msm8998-qmp-usb3-phy" must contain - "phy", "common". - For "qcom,msm8998-qmp-ufs-phy": must contain: - "ufsphy". - For "qcom,msm8998-qmp-pcie-phy" must contain: - "phy", "common". - For "qcom,sdm845-qhp-pcie-phy" must contain: - "phy". - For "qcom,sdm845-qmp-pcie-phy" must contain: - "phy". - For "qcom,sdm845-qmp-usb3-phy" must contain: - "phy", "common". - For "qcom,sdm845-qmp-usb3-uni-phy" must contain: - "phy", "common". - For "qcom,sdm845-qmp-ufs-phy": must contain: - "ufsphy". - For "qcom,sm8150-qmp-ufs-phy": must contain: - "ufsphy". - - - vdda-phy-supply: Phandle to a regulator supply to PHY core block. - - vdda-pll-supply: Phandle to 1.8V regulator supply to PHY refclk pll block. - -Optional properties: - - vddp-ref-clk-supply: Phandle to a regulator supply to any specific refclk - pll block. - -Required nodes: - - Each device node of QMP phy is required to have as many child nodes as - the number of lanes the PHY has. - -Required properties for child nodes of PCIe PHYs (one child per lane): - - reg: list of offset and length pairs of register sets for PHY blocks - - tx, rx, pcs, and pcs_misc (optional). - - #phy-cells: must be 0 - -Required properties for a single "lanes" child node of non-PCIe PHYs: - - reg: list of offset and length pairs of register sets for PHY blocks - For 1-lane devices: - tx, rx, pcs, and (optionally) pcs_misc - For 2-lane devices: - tx0, rx0, pcs, tx1, rx1, and (optionally) pcs_misc - - #phy-cells: must be 0 - -Required properties for child node of PCIe and USB3 qmp phys: - - clocks: a list of phandles and clock-specifier pairs, - one for each entry in clock-names. - - clock-names: Must contain following: - "pipe<lane-number>" for pipe clock specific to each lane. - - clock-output-names: Name of the PHY clock that will be the parent for - the above pipe clock. - For "qcom,ipq8074-qmp-pcie-phy": - - "pcie20_phy0_pipe_clk" Pipe Clock parent - (or) - "pcie20_phy1_pipe_clk" - - #clock-cells: must be 0 - - Phy pll outputs pipe clocks for pipe based PHYs. These clocks are then - gate-controlled by the gcc. - -Required properties for child node of PHYs with lane reset, AKA: - "qcom,msm8996-qmp-pcie-phy" - - resets: a list of phandles and reset controller specifier pairs, - one for each entry in reset-names. - - reset-names: Must contain following: - "lane<lane-number>" for reset specific to each lane. - -Example: - phy@34000 { - compatible = "qcom,msm8996-qmp-pcie-phy"; - reg = <0x34000 0x488>; - #address-cells = <1>; - #size-cells = <1>; - ranges; - - clocks = <&gcc GCC_PCIE_PHY_AUX_CLK>, - <&gcc GCC_PCIE_PHY_CFG_AHB_CLK>, - <&gcc GCC_PCIE_CLKREF_CLK>; - clock-names = "aux", "cfg_ahb", "ref"; - - vdda-phy-supply = <&pm8994_l28>; - vdda-pll-supply = <&pm8994_l12>; - - resets = <&gcc GCC_PCIE_PHY_BCR>, - <&gcc GCC_PCIE_PHY_COM_BCR>, - <&gcc GCC_PCIE_PHY_COM_NOCSR_BCR>; - reset-names = "phy", "common", "cfg"; - - pciephy_0: lane@35000 { - reg = <0x35000 0x130>, - <0x35200 0x200>, - <0x35400 0x1dc>; - #clock-cells = <0>; - #phy-cells = <0>; - - clocks = <&gcc GCC_PCIE_0_PIPE_CLK>; - clock-names = "pipe0"; - clock-output-names = "pcie_0_pipe_clk_src"; - resets = <&gcc GCC_PCIE_0_PHY_BCR>; - reset-names = "lane0"; - }; - - pciephy_1: lane@36000 { - ... - ... - }; - - phy@88eb000 { - compatible = "qcom,sdm845-qmp-usb3-uni-phy"; - reg = <0x88eb000 0x18c>; - #address-cells = <1>; - #size-cells = <1>; - ranges; - - clocks = <&gcc GCC_USB3_SEC_PHY_AUX_CLK>, - <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>, - <&gcc GCC_USB3_SEC_CLKREF_CLK>, - <&gcc GCC_USB3_SEC_PHY_COM_AUX_CLK>; - clock-names = "aux", "cfg_ahb", "ref", "com_aux"; - - resets = <&gcc GCC_USB3PHY_PHY_SEC_BCR>, - <&gcc GCC_USB3_PHY_SEC_BCR>; - reset-names = "phy", "common"; - - lane@88eb200 { - reg = <0x88eb200 0x128>, - <0x88eb400 0x1fc>, - <0x88eb800 0x218>, - <0x88eb600 0x70>; - #clock-cells = <0>; - #phy-cells = <0>; - clocks = <&gcc GCC_USB3_SEC_PHY_PIPE_CLK>; - clock-names = "pipe0"; - clock-output-names = "usb3_uni_phy_pipe_clk_src"; - }; - }; - - phy@1d87000 { - compatible = "qcom,sdm845-qmp-ufs-phy"; - reg = <0x1d87000 0x18c>; - #address-cells = <1>; - #size-cells = <1>; - ranges; - clock-names = "ref", - "ref_aux"; - clocks = <&gcc GCC_UFS_MEM_CLKREF_CLK>, - <&gcc GCC_UFS_PHY_PHY_AUX_CLK>; - - lanes@1d87400 { - reg = <0x1d87400 0x108>, - <0x1d87600 0x1e0>, - <0x1d87c00 0x1dc>, - <0x1d87800 0x108>, - <0x1d87a00 0x1e0>; - #phy-cells = <0>; - }; - }; diff --git a/dts/Bindings/phy/qcom-usb-ipq4019-phy.yaml b/dts/Bindings/phy/qcom-usb-ipq4019-phy.yaml new file mode 100644 index 0000000000..1118fe69b6 --- /dev/null +++ b/dts/Bindings/phy/qcom-usb-ipq4019-phy.yaml @@ -0,0 +1,50 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/phy/qcom-usb-ipq4019-phy.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: Qualcom IPQ40xx Dakota HS/SS USB PHY + +maintainers: + - Robert Marko <robert.marko@sartura.hr> + +properties: + compatible: + enum: + - qcom,usb-ss-ipq4019-phy + - qcom,usb-hs-ipq4019-phy + + reg: + maxItems: 1 + + resets: + maxItems: 2 + + reset-names: + items: + - const: por_rst + - const: srif_rst + + "#phy-cells": + const: 0 + +required: + - compatible + - reg + - resets + - reset-names + - "#phy-cells" + +examples: + - | + #include <dt-bindings/clock/qcom,gcc-ipq4019.h> + + hsphy@a8000 { + #phy-cells = <0>; + compatible = "qcom,usb-hs-ipq4019-phy"; + reg = <0xa8000 0x40>; + resets = <&gcc USB2_HSPHY_POR_ARES>, + <&gcc USB2_HSPHY_S_ARES>; + reset-names = "por_rst", "srif_rst"; + }; diff --git a/dts/Bindings/phy/rcar-gen2-phy.txt b/dts/Bindings/phy/rcar-gen2-phy.txt index ac96d6481b..a3bd1c4499 100644 --- a/dts/Bindings/phy/rcar-gen2-phy.txt +++ b/dts/Bindings/phy/rcar-gen2-phy.txt @@ -4,7 +4,8 @@ This file provides information on what the device node for the R-Car generation 2 USB PHY contains. Required properties: -- compatible: "renesas,usb-phy-r8a7743" if the device is a part of R8A7743 SoC. +- compatible: "renesas,usb-phy-r8a7742" if the device is a part of R8A7742 SoC. + "renesas,usb-phy-r8a7743" if the device is a part of R8A7743 SoC. "renesas,usb-phy-r8a7744" if the device is a part of R8A7744 SoC. "renesas,usb-phy-r8a7745" if the device is a part of R8A7745 SoC. "renesas,usb-phy-r8a77470" if the device is a part of R8A77470 SoC. diff --git a/dts/Bindings/phy/rcar-gen3-phy-usb2.txt b/dts/Bindings/phy/rcar-gen3-phy-usb2.txt deleted file mode 100644 index 7734b219d9..0000000000 --- a/dts/Bindings/phy/rcar-gen3-phy-usb2.txt +++ /dev/null @@ -1,70 +0,0 @@ -* Renesas R-Car generation 3 USB 2.0 PHY - -This file provides information on what the device node for the R-Car generation -3, RZ/G1C, RZ/G2 and RZ/A2 USB 2.0 PHY contain. - -Required properties: -- compatible: "renesas,usb2-phy-r7s9210" if the device is a part of an R7S9210 - SoC. - "renesas,usb2-phy-r8a77470" if the device is a part of an R8A77470 - SoC. - "renesas,usb2-phy-r8a774a1" if the device is a part of an R8A774A1 - SoC. - "renesas,usb2-phy-r8a774b1" if the device is a part of an R8A774B1 - SoC. - "renesas,usb2-phy-r8a774c0" if the device is a part of an R8A774C0 - SoC. - "renesas,usb2-phy-r8a7795" if the device is a part of an R8A7795 - SoC. - "renesas,usb2-phy-r8a7796" if the device is a part of an R8A7796 - SoC. - "renesas,usb2-phy-r8a77965" if the device is a part of an - R8A77965 SoC. - "renesas,usb2-phy-r8a77990" if the device is a part of an - R8A77990 SoC. - "renesas,usb2-phy-r8a77995" if the device is a part of an - R8A77995 SoC. - "renesas,rcar-gen3-usb2-phy" for a generic R-Car Gen3, RZ/G2 or - RZ/A2 compatible device. - - When compatible with the generic version, nodes must list the - SoC-specific version corresponding to the platform first - followed by the generic version. - -- reg: offset and length of the partial USB 2.0 Host register block. -- clocks: clock phandle and specifier pair(s). -- #phy-cells: see phy-bindings.txt in the same directory, must be <1> (and - using <0> is deprecated). - -The phandle's argument in the PHY specifier is the INT_STATUS bit of controller: -- 1 = USBH_INTA (OHCI) -- 2 = USBH_INTB (EHCI) -- 3 = UCOM_INT (OTG and BC) - -Optional properties: -To use a USB channel where USB 2.0 Host and HSUSB (USB 2.0 Peripheral) are -combined, the device tree node should set interrupt properties to use the -channel as USB OTG: -- interrupts: interrupt specifier for the PHY. -- vbus-supply: Phandle to a regulator that provides power to the VBUS. This - regulator will be managed during the PHY power on/off sequence. -- renesas,no-otg-pins: boolean, specify when a board does not provide proper - otg pins. -- dr_mode: string, indicates the working mode for the PHY. Can be "host", - "peripheral", or "otg". Should be set if otg controller is not used. - - -Example (R-Car H3): - - usb-phy@ee080200 { - compatible = "renesas,usb2-phy-r8a7795", "renesas,rcar-gen3-usb2-phy"; - reg = <0 0xee080200 0 0x700>; - interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 703>; - }; - - usb-phy@ee0a0200 { - compatible = "renesas,usb2-phy-r8a7795", "renesas,rcar-gen3-usb2-phy"; - reg = <0 0xee0a0200 0 0x700>; - clocks = <&cpg CPG_MOD 702>; - }; diff --git a/dts/Bindings/phy/rcar-gen3-phy-usb3.txt b/dts/Bindings/phy/rcar-gen3-phy-usb3.txt deleted file mode 100644 index 0fe433b9a5..0000000000 --- a/dts/Bindings/phy/rcar-gen3-phy-usb3.txt +++ /dev/null @@ -1,52 +0,0 @@ -* Renesas R-Car generation 3 USB 3.0 PHY - -This file provides information on what the device node for the R-Car generation -3 and RZ/G2 USB 3.0 PHY contain. -If you want to enable spread spectrum clock (ssc), you should use USB_EXTAL -instead of USB3_CLK. However, if you don't want to these features, you don't -need this driver. - -Required properties: -- compatible: "renesas,r8a774a1-usb3-phy" if the device is a part of an R8A774A1 - SoC. - "renesas,r8a774b1-usb3-phy" if the device is a part of an R8A774B1 - SoC. - "renesas,r8a7795-usb3-phy" if the device is a part of an R8A7795 - SoC. - "renesas,r8a7796-usb3-phy" if the device is a part of an R8A7796 - SoC. - "renesas,r8a77965-usb3-phy" if the device is a part of an - R8A77965 SoC. - "renesas,rcar-gen3-usb3-phy" for a generic R-Car Gen3 or RZ/G2 - compatible device. - - When compatible with the generic version, nodes must list the - SoC-specific version corresponding to the platform first - followed by the generic version. - -- reg: offset and length of the USB 3.0 PHY register block. -- clocks: A list of phandles and clock-specifier pairs. -- clock-names: Name of the clocks. - - The funcional clock must be "usb3-if". - - The usb3's external clock must be "usb3s_clk". - - The usb2's external clock must be "usb_extal". If you want to use the ssc, - the clock-frequency must not be 0. -- #phy-cells: see phy-bindings.txt in the same directory, must be <0>. - -Optional properties: -- renesas,ssc-range: Enable/disable spread spectrum clock (ssc) by using - the following values as u32: - - 0 (or the property doesn't exist): disable the ssc - - 4980: enable the ssc as -4980 ppm - - 4492: enable the ssc as -4492 ppm - - 4003: enable the ssc as -4003 ppm - -Example (R-Car H3): - - usb-phy@e65ee000 { - compatible = "renesas,r8a7795-usb3-phy", - "renesas,rcar-gen3-usb3-phy"; - reg = <0 0xe65ee000 0 0x90>; - clocks = <&cpg CPG_MOD 328>, <&usb3s0_clk>, <&usb_extal>; - clock-names = "usb3-if", "usb3s_clk", "usb_extal"; - }; diff --git a/dts/Bindings/phy/renesas,usb2-phy.yaml b/dts/Bindings/phy/renesas,usb2-phy.yaml new file mode 100644 index 0000000000..440f09fddf --- /dev/null +++ b/dts/Bindings/phy/renesas,usb2-phy.yaml @@ -0,0 +1,117 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/phy/renesas,usb2-phy.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Renesas R-Car generation 3 USB 2.0 PHY + +maintainers: + - Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> + +properties: + compatible: + oneOf: + - items: + - const: renesas,usb2-phy-r8a77470 # RZ/G1C + + - items: + - enum: + - renesas,usb2-phy-r7s9210 # RZ/A2 + - renesas,usb2-phy-r8a774a1 # RZ/G2M + - renesas,usb2-phy-r8a774b1 # RZ/G2N + - renesas,usb2-phy-r8a774c0 # RZ/G2E + - renesas,usb2-phy-r8a7795 # R-Car H3 + - renesas,usb2-phy-r8a7796 # R-Car M3-W + - renesas,usb2-phy-r8a77961 # R-Car M3-W+ + - renesas,usb2-phy-r8a77965 # R-Car M3-N + - renesas,usb2-phy-r8a77990 # R-Car E3 + - renesas,usb2-phy-r8a77995 # R-Car D3 + - const: renesas,rcar-gen3-usb2-phy + + reg: + maxItems: 1 + + clocks: + minItems: 1 + maxItems: 2 + + clock-names: + minItems: 1 + maxItems: 2 + items: + - const: fck + - const: usb_x1 + + '#phy-cells': + enum: [0, 1] # and 0 is deprecated. + description: | + The phandle's argument in the PHY specifier is the INT_STATUS bit of + controller. + - 1 = USBH_INTA (OHCI) + - 2 = USBH_INTB (EHCI) + - 3 = UCOM_INT (OTG and BC) + + interrupts: + maxItems: 1 + + power-domains: + maxItems: 1 + + resets: + minItems: 1 + maxItems: 2 + items: + - description: reset of USB 2.0 host side + - description: reset of USB 2.0 peripheral side + + vbus-supply: + description: | + Phandle to a regulator that provides power to the VBUS. This regulator + will be managed during the PHY power on/off sequence. + + renesas,no-otg-pins: + $ref: /schemas/types.yaml#/definitions/flag + description: | + specify when a board does not provide proper otg pins. + + dr_mode: true + +if: + properties: + compatible: + items: + enum: + - renesas,usb2-phy-r7s9210 +then: + required: + - clock-names + +required: + - compatible + - reg + - clocks + - '#phy-cells' + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/r8a7795-cpg-mssr.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/power/r8a7795-sysc.h> + + usb-phy@ee080200 { + compatible = "renesas,usb2-phy-r8a7795", "renesas,rcar-gen3-usb2-phy"; + reg = <0xee080200 0x700>; + interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 703>; + #phy-cells = <1>; + }; + + usb-phy@ee0a0200 { + compatible = "renesas,usb2-phy-r8a7795", "renesas,rcar-gen3-usb2-phy"; + reg = <0xee0a0200 0x700>; + clocks = <&cpg CPG_MOD 702>; + #phy-cells = <1>; + }; diff --git a/dts/Bindings/phy/renesas,usb3-phy.yaml b/dts/Bindings/phy/renesas,usb3-phy.yaml new file mode 100644 index 0000000000..68cf9dd039 --- /dev/null +++ b/dts/Bindings/phy/renesas,usb3-phy.yaml @@ -0,0 +1,78 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/phy/renesas,usb3-phy.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Renesas R-Car generation 3 USB 3.0 PHY + +maintainers: + - Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> + +properties: + compatible: + items: + - enum: + - renesas,r8a774a1-usb3-phy # RZ/G2M + - renesas,r8a774b1-usb3-phy # RZ/G2N + - renesas,r8a7795-usb3-phy # R-Car H3 + - renesas,r8a7796-usb3-phy # R-Car M3-W + - renesas,r8a77961-usb3-phy # R-Car M3-W+ + - renesas,r8a77965-usb3-phy # R-Car M3-N + - const: renesas,rcar-gen3-usb3-phy + + reg: + maxItems: 1 + + clocks: + minItems: 2 + maxItems: 3 + + clock-names: + # If you want to use the ssc, the clock-frequency of usb_extal + # must not be 0. + minItems: 2 + maxItems: 3 + items: + - const: usb3-if # The funcional clock + - const: usb3s_clk # The usb3's external clock + - const: usb_extal # The usb2's external clock + + '#phy-cells': + # see phy-bindings.txt in the same directory + const: 0 + + power-domains: + maxItems: 1 + + resets: + maxItems: 1 + + renesas,ssc-range: + description: | + Enable/disable spread spectrum clock (ssc). 0 or the property doesn't + exist means disabling the ssc. The actual value will be -<value> ppm. + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [ 0, 4003, 4492, 4980 ] + +required: + - compatible + - reg + - clocks + - clock-names + - '#phy-cells' + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/r8a7795-cpg-mssr.h> + #include <dt-bindings/power/r8a7795-sysc.h> + + usb-phy@e65ee000 { + compatible = "renesas,r8a7795-usb3-phy", "renesas,rcar-gen3-usb3-phy"; + reg = <0xe65ee000 0x90>; + clocks = <&cpg CPG_MOD 328>, <&usb3s0_clk>, <&usb_extal>; + clock-names = "usb3-if", "usb3s_clk", "usb_extal"; + #phy-cells = <0>; + }; diff --git a/dts/Bindings/phy/rockchip,px30-dsi-dphy.yaml b/dts/Bindings/phy/rockchip,px30-dsi-dphy.yaml index 72aca81e89..8a3032a3bd 100644 --- a/dts/Bindings/phy/rockchip,px30-dsi-dphy.yaml +++ b/dts/Bindings/phy/rockchip,px30-dsi-dphy.yaml @@ -59,7 +59,7 @@ examples: - | dsi_dphy: phy@ff2e0000 { compatible = "rockchip,px30-dsi-dphy"; - reg = <0x0 0xff2e0000 0x0 0x10000>; + reg = <0xff2e0000 0x10000>; clocks = <&pmucru 13>, <&cru 12>; clock-names = "ref", "pclk"; resets = <&cru 12>; diff --git a/dts/Bindings/phy/rockchip-mipi-dphy-rx0.yaml b/dts/Bindings/phy/rockchip-mipi-dphy-rx0.yaml new file mode 100644 index 0000000000..7d888d3588 --- /dev/null +++ b/dts/Bindings/phy/rockchip-mipi-dphy-rx0.yaml @@ -0,0 +1,73 @@ +# SPDX-License-Identifier: (GPL-2.0+ OR MIT) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/phy/rockchip-mipi-dphy-rx0.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Rockchip SoC MIPI RX0 D-PHY Device Tree Bindings + +maintainers: + - Helen Koike <helen.koike@collabora.com> + - Ezequiel Garcia <ezequiel@collabora.com> + +description: | + The Rockchip SoC has a MIPI D-PHY bus with an RX0 entry which connects to + the ISP1 (Image Signal Processing unit v1.0) for CSI cameras. + +properties: + compatible: + const: rockchip,rk3399-mipi-dphy-rx0 + + clocks: + items: + - description: MIPI D-PHY ref clock + - description: MIPI D-PHY RX0 cfg clock + - description: Video in/out general register file clock + + clock-names: + items: + - const: dphy-ref + - const: dphy-cfg + - const: grf + + '#phy-cells': + const: 0 + + power-domains: + description: Video in/out power domain. + maxItems: 1 + +required: + - compatible + - clocks + - clock-names + - '#phy-cells' + - power-domains + +additionalProperties: false + +examples: + - | + + /* + * MIPI D-PHY RX0 use registers in "general register files", it + * should be a child of the GRF. + * + * grf: syscon@ff770000 { + * compatible = "rockchip,rk3399-grf", "syscon", "simple-mfd"; + * ... + * }; + */ + + #include <dt-bindings/clock/rk3399-cru.h> + #include <dt-bindings/power/rk3399-power.h> + + mipi_dphy_rx0: mipi-dphy-rx0 { + compatible = "rockchip,rk3399-mipi-dphy-rx0"; + clocks = <&cru SCLK_MIPIDPHY_REF>, + <&cru SCLK_DPHY_RX0_CFG>, + <&cru PCLK_VIO_GRF>; + clock-names = "dphy-ref", "dphy-cfg", "grf"; + power-domains = <&power RK3399_PD_VIO>; + #phy-cells = <0>; + }; diff --git a/dts/Bindings/phy/socionext,uniphier-pcie-phy.yaml b/dts/Bindings/phy/socionext,uniphier-pcie-phy.yaml new file mode 100644 index 0000000000..86f49093b6 --- /dev/null +++ b/dts/Bindings/phy/socionext,uniphier-pcie-phy.yaml @@ -0,0 +1,77 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/phy/socionext,uniphier-pcie-phy.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Socionext UniPhier PCIe PHY + +description: | + This describes the devicetree bindings for PHY interface built into + PCIe controller implemented on Socionext UniPhier SoCs. + +maintainers: + - Kunihiko Hayashi <hayashi.kunihiko@socionext.com> + +properties: + compatible: + enum: + - socionext,uniphier-pro5-pcie-phy + - socionext,uniphier-ld20-pcie-phy + - socionext,uniphier-pxs3-pcie-phy + + reg: + description: PHY register region (offset and length) + + "#phy-cells": + const: 0 + + clocks: + minItems: 1 + maxItems: 2 + + clock-names: + oneOf: + - items: # for Pro5 + - const: gio + - const: link + - const: link # for others + + resets: + minItems: 1 + maxItems: 2 + + reset-names: + oneOf: + - items: # for Pro5 + - const: gio + - const: link + - const: link # for others + + socionext,syscon: + $ref: /schemas/types.yaml#/definitions/phandle + description: A phandle to system control to set configurations for phy + +required: + - compatible + - reg + - "#phy-cells" + - clocks + - clock-names + - resets + - reset-names + +additionalProperties: false + +examples: + - | + pcie_phy: phy@66038000 { + compatible = "socionext,uniphier-ld20-pcie-phy"; + reg = <0x66038000 0x4000>; + #phy-cells = <0>; + clock-names = "link"; + clocks = <&sys_clk 24>; + reset-names = "link"; + resets = <&sys_rst 24>; + socionext,syscon = <&soc_glue>; + }; diff --git a/dts/Bindings/phy/socionext,uniphier-usb2-phy.yaml b/dts/Bindings/phy/socionext,uniphier-usb2-phy.yaml new file mode 100644 index 0000000000..479b203f7a --- /dev/null +++ b/dts/Bindings/phy/socionext,uniphier-usb2-phy.yaml @@ -0,0 +1,85 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/phy/socionext,uniphier-usb2-phy.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Socionext UniPhier USB2 PHY + +description: | + This describes the devicetree bindings for PHY interface built into + USB2 controller implemented on Socionext UniPhier SoCs. + Pro4 SoC has both USB2 and USB3 host controllers, however, this USB3 + controller doesn't include its own High-Speed PHY. This needs to specify + USB2 PHY instead of USB3 HS-PHY. + +maintainers: + - Kunihiko Hayashi <hayashi.kunihiko@socionext.com> + +properties: + compatible: + enum: + - socionext,uniphier-pro4-usb2-phy + - socionext,uniphier-ld11-usb2-phy + + "#address-cells": + const: 1 + + "#size-cells": + const: 0 + +patternProperties: + "^phy@[0-9]+$": + type: object + additionalProperties: false + + properties: + reg: + minimum: 0 + maximum: 3 + description: + The ID number for the PHY + + "#phy-cells": + const: 0 + + required: + - reg + - "#phy-cells" + +required: + - compatible + - "#address-cells" + - "#size-cells" + +additionalProperties: false + +examples: + - | + // The UniPhier usb2-phy should be a subnode of a "syscon" compatible node. + + soc-glue@5f800000 { + compatible = "socionext,uniphier-ld11-soc-glue", "simple-mfd", "syscon"; + reg = <0x5f800000 0x2000>; + + usb-controller { + compatible = "socionext,uniphier-ld11-usb2-phy"; + #address-cells = <1>; + #size-cells = <0>; + + usb_phy0: phy@0 { + reg = <0>; + #phy-cells = <0>; + }; + + usb_phy1: phy@1 { + reg = <1>; + #phy-cells = <0>; + }; + + usb_phy2: phy@2 { + reg = <2>; + #phy-cells = <0>; + }; + }; + }; diff --git a/dts/Bindings/phy/socionext,uniphier-usb3hs-phy.yaml b/dts/Bindings/phy/socionext,uniphier-usb3hs-phy.yaml new file mode 100644 index 0000000000..f88d36207b --- /dev/null +++ b/dts/Bindings/phy/socionext,uniphier-usb3hs-phy.yaml @@ -0,0 +1,103 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/phy/socionext,uniphier-usb3hs-phy.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Socionext UniPhier USB3 High-Speed (HS) PHY + +description: | + This describes the devicetree bindings for PHY interfaces built into + USB3 controller implemented on Socionext UniPhier SoCs. + Although the controller includes High-Speed PHY and Super-Speed PHY, + this describes about High-Speed PHY. + +maintainers: + - Kunihiko Hayashi <hayashi.kunihiko@socionext.com> + +properties: + compatible: + enum: + - socionext,uniphier-pro5-usb3-hsphy + - socionext,uniphier-pxs2-usb3-hsphy + - socionext,uniphier-ld20-usb3-hsphy + - socionext,uniphier-pxs3-usb3-hsphy + + reg: + description: PHY register region (offset and length) + + "#phy-cells": + const: 0 + + clocks: + minItems: 1 + maxItems: 2 + + clock-names: + oneOf: + - const: link # for PXs2 + - items: # for PXs3 + - const: link + - const: phy + + resets: + maxItems: 2 + + reset-names: + items: + - const: link + - const: phy + + vbus-supply: + description: A phandle to the regulator for USB VBUS + + nvmem-cells: + maxItems: 3 + description: + Phandles to nvmem cell that contains the trimming data. + Available only for HS-PHY implemented on LD20 and PXs3, and + if unspecified, default value is used. + + nvmem-cell-names: + items: + - const: rterm + - const: sel_t + - const: hs_i + description: + Should be the following names, which correspond to each nvmem-cells. + All of the 3 parameters associated with the above names are + required for each port, if any one is omitted, the trimming data + of the port will not be set at all. + +required: + - compatible + - reg + - "#phy-cells" + - clocks + - clock-names + - resets + - reset-names + +additionalProperties: false + +examples: + - | + usb-glue@65b00000 { + compatible = "socionext,uniphier-ld20-dwc3-glue", "simple-mfd"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x65b00000 0x400>; + + usb_hsphy0: hs-phy@200 { + compatible = "socionext,uniphier-ld20-usb3-hsphy"; + reg = <0x200 0x10>; + #phy-cells = <0>; + clock-names = "link", "phy"; + clocks = <&sys_clk 14>, <&sys_clk 16>; + reset-names = "link", "phy"; + resets = <&sys_rst 14>, <&sys_rst 16>; + vbus-supply = <&usb_vbus0>; + nvmem-cell-names = "rterm", "sel_t", "hs_i"; + nvmem-cells = <&usb_rterm0>, <&usb_sel_t0>, <&usb_hs_i0>; + }; + }; diff --git a/dts/Bindings/phy/socionext,uniphier-usb3ss-phy.yaml b/dts/Bindings/phy/socionext,uniphier-usb3ss-phy.yaml new file mode 100644 index 0000000000..edff2c95c9 --- /dev/null +++ b/dts/Bindings/phy/socionext,uniphier-usb3ss-phy.yaml @@ -0,0 +1,96 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/phy/socionext,uniphier-usb3ss-phy.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Socionext UniPhier USB3 Super-Speed (SS) PHY + +description: | + This describes the devicetree bindings for PHY interfaces built into + USB3 controller implemented on Socionext UniPhier SoCs. + Although the controller includes High-Speed PHY and Super-Speed PHY, + this describes about Super-Speed PHY. + +maintainers: + - Kunihiko Hayashi <hayashi.kunihiko@socionext.com> + +properties: + compatible: + enum: + - socionext,uniphier-pro4-usb3-ssphy + - socionext,uniphier-pro5-usb3-ssphy + - socionext,uniphier-pxs2-usb3-ssphy + - socionext,uniphier-ld20-usb3-ssphy + - socionext,uniphier-pxs3-usb3-ssphy + + reg: + description: PHY register region (offset and length) + + "#phy-cells": + const: 0 + + clocks: + minItems: 2 + maxItems: 3 + + clock-names: + oneOf: + - items: # for Pro4, Pro5 + - const: gio + - const: link + - items: # for PXs3 with phy-ext + - const: link + - const: phy + - const: phy-ext + - items: # for others + - const: link + - const: phy + + resets: + maxItems: 2 + + reset-names: + oneOf: + - items: # for Pro4,Pro5 + - const: gio + - const: link + - items: # for others + - const: link + - const: phy + + vbus-supply: + description: A phandle to the regulator for USB VBUS + +required: + - compatible + - reg + - "#phy-cells" + - clocks + - clock-names + - resets + - reset-names + - vbus-supply + +additionalProperties: false + +examples: + - | + usb-glue@65b00000 { + compatible = "socionext,uniphier-ld20-dwc3-glue", + "simple-mfd"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x65b00000 0x400>; + + usb_ssphy0: ss-phy@300 { + compatible = "socionext,uniphier-ld20-usb3-ssphy"; + reg = <0x300 0x10>; + #phy-cells = <0>; + clock-names = "link", "phy"; + clocks = <&sys_clk 14>, <&sys_clk 16>; + reset-names = "link", "phy"; + resets = <&sys_rst 14>, <&sys_rst 16>; + vbus-supply = <&usb_vbus0>; + }; + }; diff --git a/dts/Bindings/phy/uniphier-pcie-phy.txt b/dts/Bindings/phy/uniphier-pcie-phy.txt deleted file mode 100644 index 3cee372c57..0000000000 --- a/dts/Bindings/phy/uniphier-pcie-phy.txt +++ /dev/null @@ -1,36 +0,0 @@ -Socionext UniPhier PCIe PHY bindings - -This describes the devicetree bindings for PHY interface built into -PCIe controller implemented on Socionext UniPhier SoCs. - -Required properties: -- compatible: Should contain one of the following: - "socionext,uniphier-pro5-pcie-phy" - for Pro5 PHY - "socionext,uniphier-ld20-pcie-phy" - for LD20 PHY - "socionext,uniphier-pxs3-pcie-phy" - for PXs3 PHY -- reg: Specifies offset and length of the register set for the device. -- #phy-cells: Must be zero. -- clocks: A list of phandles to the clock gate for PCIe glue layer - including this phy. -- clock-names: For Pro5 only, should contain the following: - "gio", "link" - for Pro5 SoC -- resets: A list of phandles to the reset line for PCIe glue layer - including this phy. -- reset-names: For Pro5 only, should contain the following: - "gio", "link" - for Pro5 SoC - -Optional properties: -- socionext,syscon: A phandle to system control to set configurations - for phy. - -Refer to phy/phy-bindings.txt for the generic PHY binding properties. - -Example: - pcie_phy: phy@66038000 { - compatible = "socionext,uniphier-ld20-pcie-phy"; - reg = <0x66038000 0x4000>; - #phy-cells = <0>; - clocks = <&sys_clk 24>; - resets = <&sys_rst 24>; - socionext,syscon = <&soc_glue>; - }; diff --git a/dts/Bindings/phy/uniphier-usb2-phy.txt b/dts/Bindings/phy/uniphier-usb2-phy.txt deleted file mode 100644 index b43b28250c..0000000000 --- a/dts/Bindings/phy/uniphier-usb2-phy.txt +++ /dev/null @@ -1,45 +0,0 @@ -Socionext UniPhier USB2 PHY - -This describes the devicetree bindings for PHY interface built into -USB2 controller implemented on Socionext UniPhier SoCs. - -Pro4 SoC has both USB2 and USB3 host controllers, however, this USB3 -controller doesn't include its own High-Speed PHY. This needs to specify -USB2 PHY instead of USB3 HS-PHY. - -Required properties: -- compatible: Should contain one of the following: - "socionext,uniphier-pro4-usb2-phy" - for Pro4 SoC - "socionext,uniphier-ld11-usb2-phy" - for LD11 SoC - -Sub-nodes: -Each PHY should be represented as a sub-node. - -Sub-nodes required properties: -- #phy-cells: Should be 0. -- reg: The number of the PHY. - -Sub-nodes optional properties: -- vbus-supply: A phandle to the regulator for USB VBUS. - -Refer to phy/phy-bindings.txt for the generic PHY binding properties. - -Example: - soc-glue@5f800000 { - ... - usb-phy { - compatible = "socionext,uniphier-ld11-usb2-phy"; - usb_phy0: phy@0 { - reg = <0>; - #phy-cells = <0>; - }; - ... - }; - }; - - usb@5a800100 { - compatible = "socionext,uniphier-ehci", "generic-ehci"; - ... - phy-names = "usb"; - phys = <&usb_phy0>; - }; diff --git a/dts/Bindings/phy/uniphier-usb3-hsphy.txt b/dts/Bindings/phy/uniphier-usb3-hsphy.txt deleted file mode 100644 index 093d4f0870..0000000000 --- a/dts/Bindings/phy/uniphier-usb3-hsphy.txt +++ /dev/null @@ -1,69 +0,0 @@ -Socionext UniPhier USB3 High-Speed (HS) PHY - -This describes the devicetree bindings for PHY interfaces built into -USB3 controller implemented on Socionext UniPhier SoCs. -Although the controller includes High-Speed PHY and Super-Speed PHY, -this describes about High-Speed PHY. - -Required properties: -- compatible: Should contain one of the following: - "socionext,uniphier-pro5-usb3-hsphy" - for Pro5 SoC - "socionext,uniphier-pxs2-usb3-hsphy" - for PXs2 SoC - "socionext,uniphier-ld20-usb3-hsphy" - for LD20 SoC - "socionext,uniphier-pxs3-usb3-hsphy" - for PXs3 SoC -- reg: Specifies offset and length of the register set for the device. -- #phy-cells: Should be 0. -- clocks: A list of phandles to the clock gate for USB3 glue layer. - According to the clock-names, appropriate clocks are required. -- clock-names: Should contain the following: - "gio", "link" - for Pro5 SoC - "phy", "phy-ext", "link" - for PXs3 SoC, "phy-ext" is optional. - "phy", "link" - for others -- resets: A list of phandles to the reset control for USB3 glue layer. - According to the reset-names, appropriate resets are required. -- reset-names: Should contain the following: - "gio", "link" - for Pro5 SoC - "phy", "link" - for others - -Optional properties: -- vbus-supply: A phandle to the regulator for USB VBUS. -- nvmem-cells: Phandles to nvmem cell that contains the trimming data. - Available only for HS-PHY implemented on LD20 and PXs3, and - if unspecified, default value is used. -- nvmem-cell-names: Should be the following names, which correspond to - each nvmem-cells. - All of the 3 parameters associated with the following names are - required for each port, if any one is omitted, the trimming data - of the port will not be set at all. - "rterm", "sel_t", "hs_i" - Each cell name for phy parameters - -Refer to phy/phy-bindings.txt for the generic PHY binding properties. - -Example: - - usb-glue@65b00000 { - compatible = "socionext,uniphier-ld20-dwc3-glue", - "simple-mfd"; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0 0x65b00000 0x400>; - - usb_vbus0: regulator { - ... - }; - - usb_hsphy0: hs-phy@200 { - compatible = "socionext,uniphier-ld20-usb3-hsphy"; - reg = <0x200 0x10>; - #phy-cells = <0>; - clock-names = "link", "phy"; - clocks = <&sys_clk 14>, <&sys_clk 16>; - reset-names = "link", "phy"; - resets = <&sys_rst 14>, <&sys_rst 16>; - vbus-supply = <&usb_vbus0>; - nvmem-cell-names = "rterm", "sel_t", "hs_i"; - nvmem-cells = <&usb_rterm0>, <&usb_sel_t0>, - <&usb_hs_i0>; - }; - ... - }; diff --git a/dts/Bindings/phy/uniphier-usb3-ssphy.txt b/dts/Bindings/phy/uniphier-usb3-ssphy.txt deleted file mode 100644 index 9df2bc2f59..0000000000 --- a/dts/Bindings/phy/uniphier-usb3-ssphy.txt +++ /dev/null @@ -1,58 +0,0 @@ -Socionext UniPhier USB3 Super-Speed (SS) PHY - -This describes the devicetree bindings for PHY interfaces built into -USB3 controller implemented on Socionext UniPhier SoCs. -Although the controller includes High-Speed PHY and Super-Speed PHY, -this describes about Super-Speed PHY. - -Required properties: -- compatible: Should contain one of the following: - "socionext,uniphier-pro4-usb3-ssphy" - for Pro4 SoC - "socionext,uniphier-pro5-usb3-ssphy" - for Pro5 SoC - "socionext,uniphier-pxs2-usb3-ssphy" - for PXs2 SoC - "socionext,uniphier-ld20-usb3-ssphy" - for LD20 SoC - "socionext,uniphier-pxs3-usb3-ssphy" - for PXs3 SoC -- reg: Specifies offset and length of the register set for the device. -- #phy-cells: Should be 0. -- clocks: A list of phandles to the clock gate for USB3 glue layer. - According to the clock-names, appropriate clocks are required. -- clock-names: - "gio", "link" - for Pro4 and Pro5 SoC - "phy", "phy-ext", "link" - for PXs3 SoC, "phy-ext" is optional. - "phy", "link" - for others -- resets: A list of phandles to the reset control for USB3 glue layer. - According to the reset-names, appropriate resets are required. -- reset-names: - "gio", "link" - for Pro4 and Pro5 SoC - "phy", "link" - for others - -Optional properties: -- vbus-supply: A phandle to the regulator for USB VBUS. - -Refer to phy/phy-bindings.txt for the generic PHY binding properties. - -Example: - - usb-glue@65b00000 { - compatible = "socionext,uniphier-ld20-dwc3-glue", - "simple-mfd"; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0 0x65b00000 0x400>; - - usb_vbus0: regulator { - ... - }; - - usb_ssphy0: ss-phy@300 { - compatible = "socionext,uniphier-ld20-usb3-ssphy"; - reg = <0x300 0x10>; - #phy-cells = <0>; - clock-names = "link", "phy"; - clocks = <&sys_clk 14>, <&sys_clk 16>; - reset-names = "link", "phy"; - resets = <&sys_rst 14>, <&sys_rst 16>; - vbus-supply = <&usb_vbus0>; - }; - ... - }; |