1 files changed, 24 insertions, 40 deletions
diff --git a/dts/Bindings/pinctrl/pinctrl-mt8192.yaml b/dts/Bindings/pinctrl/pinctrl-mt8192.yaml
index c90a132fbc..e0e943e5b8 100644
--- a/dts/Bindings/pinctrl/pinctrl-mt8192.yaml
+++ b/dts/Bindings/pinctrl/pinctrl-mt8192.yaml
@@ -80,46 +80,30 @@ patternProperties:
               dt-bindings/pinctrl/mt65xx.h. It can only support 2/4/6/8/10/12/14/16mA in mt8192.
             enum: [2, 4, 6, 8, 10, 12, 14, 16]
 
-          mediatek,drive-strength-adv:
-            description: |
-              Describe the specific driving setup property.
-              For I2C pins, the existing generic driving setup can only support
-              2/4/6/8/10/12/14/16mA driving. But in specific driving setup, they
-              can support 0.125/0.25/0.5/1mA adjustment. If we enable specific
-              driving setup, the existing generic setup will be disabled.
-              The specific driving setup is controlled by E1E0EN.
-              When E1=0/E0=0, the strength is 0.125mA.
-              When E1=0/E0=1, the strength is 0.25mA.
-              When E1=1/E0=0, the strength is 0.5mA.
-              When E1=1/E0=1, the strength is 1mA.
-              EN is used to enable or disable the specific driving setup.
-              Valid arguments are described as below:
-              0: (E1, E0, EN) = (0, 0, 0)
-              1: (E1, E0, EN) = (0, 0, 1)
-              2: (E1, E0, EN) = (0, 1, 0)
-              3: (E1, E0, EN) = (0, 1, 1)
-              4: (E1, E0, EN) = (1, 0, 0)
-              5: (E1, E0, EN) = (1, 0, 1)
-              6: (E1, E0, EN) = (1, 1, 0)
-              7: (E1, E0, EN) = (1, 1, 1)
-              So the valid arguments are from 0 to 7.
-            $ref: /schemas/types.yaml#/definitions/uint32
-            enum: [0, 1, 2, 3, 4, 5, 6, 7]
-
-          mediatek,pull-up-adv:
-            description: |
-              Pull up settings for 2 pull resistors, R0 and R1. User can
-              configure those special pins. Valid arguments are described as below:
-              0: (R1, R0) = (0, 0) which means R1 disabled and R0 disabled.
-              1: (R1, R0) = (0, 1) which means R1 disabled and R0 enabled.
-              2: (R1, R0) = (1, 0) which means R1 enabled and R0 disabled.
-              3: (R1, R0) = (1, 1) which means R1 enabled and R0 enabled.
-            $ref: /schemas/types.yaml#/definitions/uint32
-            enum: [0, 1, 2, 3]
-
-          bias-pull-down: true
-
-          bias-pull-up: true
+          drive-strength-microamp:
+            enum: [125, 250, 500, 1000]
+
+          bias-pull-down:
+            oneOf:
+              - type: boolean
+                description: normal pull down.
+              - enum: [100, 101, 102, 103]
+                description: PUPD/R1/R0 pull down type. See MTK_PUPD_SET_R1R0_
+                  defines in dt-bindings/pinctrl/mt65xx.h.
+              - enum: [200, 201, 202, 203]
+                description: RSEL pull down type. See MTK_PULL_SET_RSEL_
+                  defines in dt-bindings/pinctrl/mt65xx.h.
+
+          bias-pull-up:
+            oneOf:
+              - type: boolean
+                description: normal pull up.
+              - enum: [100, 101, 102, 103]
+                description: PUPD/R1/R0 pull up type. See MTK_PUPD_SET_R1R0_
+                  defines in dt-bindings/pinctrl/mt65xx.h.
+              - enum: [200, 201, 202, 203]
+                description: RSEL pull up type. See MTK_PULL_SET_RSEL_
+                  defines in dt-bindings/pinctrl/mt65xx.h.
 
           bias-disable: true