diff options
Diffstat (limited to 'dts/Bindings/pinctrl/pinctrl-mt8195.yaml')
| -rw-r--r-- | dts/Bindings/pinctrl/pinctrl-mt8195.yaml | 65 |
1 files changed, 51 insertions, 14 deletions
diff --git a/dts/Bindings/pinctrl/pinctrl-mt8195.yaml b/dts/Bindings/pinctrl/pinctrl-mt8195.yaml index 328ea59c54..c5b755514c 100644 --- a/dts/Bindings/pinctrl/pinctrl-mt8195.yaml +++ b/dts/Bindings/pinctrl/pinctrl-mt8195.yaml @@ -98,7 +98,41 @@ patternProperties: drive-strength: enum: [2, 4, 6, 8, 10, 12, 14, 16] + mediatek,drive-strength-adv: + description: | + Describe the specific driving setup property. + For I2C pins, the existing generic driving setup can only support + 2/4/6/8/10/12/14/16mA driving. But in specific driving setup, they + can support 0.125/0.25/0.5/1mA adjustment. If we enable specific + driving setup, the existing generic setup will be disabled. + The specific driving setup is controlled by E1E0EN. + When E1=0/E0=0, the strength is 0.125mA. + When E1=0/E0=1, the strength is 0.25mA. + When E1=1/E0=0, the strength is 0.5mA. + When E1=1/E0=1, the strength is 1mA. + EN is used to enable or disable the specific driving setup. + Valid arguments are described as below: + 0: (E1, E0, EN) = (0, 0, 0) + 1: (E1, E0, EN) = (0, 0, 1) + 2: (E1, E0, EN) = (0, 1, 0) + 3: (E1, E0, EN) = (0, 1, 1) + 4: (E1, E0, EN) = (1, 0, 0) + 5: (E1, E0, EN) = (1, 0, 1) + 6: (E1, E0, EN) = (1, 1, 0) + 7: (E1, E0, EN) = (1, 1, 1) + So the valid arguments are from 0 to 7. + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1, 2, 3, 4, 5, 6, 7] + bias-pull-down: + oneOf: + - type: boolean + - enum: [100, 101, 102, 103] + description: mt8195 pull down PUPD/R0/R1 type define value. + - enum: [200, 201, 202, 203, 204, 205, 206, 207] + description: mt8195 pull down RSEL type define value. + - enum: [75000, 5000] + description: mt8195 pull down RSEL type si unit value(ohm). description: | For pull down type is normal, it don't need add RSEL & R1R0 define and resistance value. @@ -115,13 +149,6 @@ patternProperties: & "MTK_PULL_SET_RSEL_110" & "MTK_PULL_SET_RSEL_111" define in mt8195. It can also support resistance value(ohm) "75000" & "5000" in mt8195. - oneOf: - - enum: [100, 101, 102, 103] - - description: mt8195 pull down PUPD/R0/R1 type define value. - - enum: [200, 201, 202, 203, 204, 205, 206, 207] - - description: mt8195 pull down RSEL type define value. - - enum: [75000, 5000] - - description: mt8195 pull down RSEL type si unit value(ohm). An example of using RSEL define: pincontroller { @@ -146,6 +173,14 @@ patternProperties: }; bias-pull-up: + oneOf: + - type: boolean + - enum: [100, 101, 102, 103] + description: mt8195 pull up PUPD/R0/R1 type define value. + - enum: [200, 201, 202, 203, 204, 205, 206, 207] + description: mt8195 pull up RSEL type define value. + - enum: [1000, 1500, 2000, 3000, 4000, 5000, 10000, 75000] + description: mt8195 pull up RSEL type si unit value(ohm). description: | For pull up type is normal, it don't need add RSEL & R1R0 define and resistance value. @@ -163,13 +198,6 @@ patternProperties: define in mt8195. It can also support resistance value(ohm) "1000" & "1500" & "2000" & "3000" & "4000" & "5000" & "10000" & "75000" in mt8195. - oneOf: - - enum: [100, 101, 102, 103] - - description: mt8195 pull up PUPD/R0/R1 type define value. - - enum: [200, 201, 202, 203, 204, 205, 206, 207] - - description: mt8195 pull up RSEL type define value. - - enum: [1000, 1500, 2000, 3000, 4000, 5000, 10000, 75000] - - description: mt8195 pull up RSEL type si unit value(ohm). An example of using RSEL define: pincontroller { i2c0-pins { @@ -268,4 +296,13 @@ examples: bias-pull-down; }; }; + + i2c0-pins { + pins { + pinmux = <PINMUX_GPIO8__FUNC_SDA0>, + <PINMUX_GPIO9__FUNC_SCL0>; + bias-disable; + mediatek,drive-strength-adv = <7>; + }; + }; }; |