diff options
Diffstat (limited to 'dts/Bindings/pinctrl/qcom,qcm2290-pinctrl.yaml')
| -rw-r--r-- | dts/Bindings/pinctrl/qcom,qcm2290-pinctrl.yaml | 168 |
1 files changed, 0 insertions, 168 deletions
diff --git a/dts/Bindings/pinctrl/qcom,qcm2290-pinctrl.yaml b/dts/Bindings/pinctrl/qcom,qcm2290-pinctrl.yaml deleted file mode 100644 index 206f4f2387..0000000000 --- a/dts/Bindings/pinctrl/qcom,qcm2290-pinctrl.yaml +++ /dev/null @@ -1,168 +0,0 @@ -# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) -%YAML 1.2 ---- -$id: http://devicetree.org/schemas/pinctrl/qcom,qcm2290-pinctrl.yaml# -$schema: http://devicetree.org/meta-schemas/core.yaml# - -title: Qualcomm Technologies, Inc. QCM2290 TLMM block - -maintainers: - - Shawn Guo <shawn.guo@linaro.org> - -description: - This binding describes the Top Level Mode Multiplexer block found in the - QCM2290 platform. - -properties: - compatible: - const: qcom,qcm2290-tlmm - - reg: - maxItems: 1 - - interrupts: - description: Specifies the TLMM summary IRQ - maxItems: 1 - - interrupt-controller: true - - '#interrupt-cells': - description: - Specifies the PIN numbers and Flags, as defined in defined in - include/dt-bindings/interrupt-controller/irq.h - const: 2 - - gpio-controller: true - - '#gpio-cells': - description: Specifying the pin number and flags, as defined in - include/dt-bindings/gpio/gpio.h - const: 2 - - gpio-ranges: - maxItems: 1 - - wakeup-parent: - maxItems: 1 - -#PIN CONFIGURATION NODES -patternProperties: - '-state$': - oneOf: - - $ref: "#/$defs/qcom-qcm2290-tlmm-state" - - patternProperties: - ".*": - $ref: "#/$defs/qcom-qcm2290-tlmm-state" - -'$defs': - qcom-qcm2290-tlmm-state: - type: object - description: - Pinctrl node's client devices use subnodes for desired pin configuration. - Client device subnodes use below standard properties. - $ref: "qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state" - - properties: - pins: - description: - List of gpio pins affected by the properties specified in this - subnode. - items: - oneOf: - - pattern: "^gpio([0-9]|[1-9][0-9]|1[0-1][0-9]|12[0-6])$" - - enum: [ sdc1_rclk, sdc1_clk, sdc1_cmd, sdc1_data, - sdc2_clk, sdc2_cmd, sdc2_data ] - minItems: 1 - maxItems: 36 - - function: - description: - Specify the alternative function to be configured for the specified - pins. - - enum: [ adsp_ext, agera_pll, atest, cam_mclk, cci_async, cci_i2c, - cci_timer0, cci_timer1, cci_timer2, cci_timer3, char_exec, - cri_trng, cri_trng0, cri_trng1, dac_calib, dbg_out, ddr_bist, - ddr_pxi0, ddr_pxi1, ddr_pxi2, ddr_pxi3, gcc_gp1, gcc_gp2, - gcc_gp3, gpio, gp_pdm0, gp_pdm1, gp_pdm2, gsm0_tx, gsm1_tx, - jitter_bist, mdp_vsync, mdp_vsync_out_0, mdp_vsync_out_1, - mpm_pwr, mss_lte, m_voc, nav_gpio, pa_indicator, pbs0, pbs1, - pbs2, pbs3, pbs4, pbs5, pbs6, pbs7, pbs8, pbs9, pbs10, pbs11, - pbs12, pbs13, pbs14, pbs15, pbs_out, phase_flag, pll_bist, - pll_bypassnl, pll_reset, prng_rosc, pwm_0, pwm_1, pwm_2, pwm_3, - pwm_4, pwm_5, pwm_6, pwm_7, pwm_8, pwm_9, qdss_cti, qdss_gpio, - qup0, qup1, qup2, qup3, qup4, qup5, sdc1_tb, sdc2_tb, sd_write, - ssbi_wtr1, tgu_ch0, tgu_ch1, tgu_ch2, tgu_ch3, tsense_pwm, - uim1_clk, uim1_data, uim1_present, uim1_reset, uim2_clk, - uim2_data, uim2_present, uim2_reset, usb_phy, vfr_1, - vsense_trigger, wlan1_adc0, wlan1_adc1 ] - - drive-strength: - enum: [2, 4, 6, 8, 10, 12, 14, 16] - default: 2 - description: - Selects the drive strength for the specified pins, in mA. - - bias-pull-down: true - - bias-pull-up: true - - bias-disable: true - - output-high: true - - output-low: true - - required: - - pins - - additionalProperties: false - -allOf: - - $ref: "pinctrl.yaml#" - -required: - - compatible - - reg - - interrupts - - interrupt-controller - - '#interrupt-cells' - - gpio-controller - - '#gpio-cells' - - gpio-ranges - -additionalProperties: false - -examples: - - | - #include <dt-bindings/interrupt-controller/arm-gic.h> - tlmm: pinctrl@500000 { - compatible = "qcom,qcm2290-tlmm"; - reg = <0x500000 0x300000>; - interrupts = <GIC_SPI 227 IRQ_TYPE_LEVEL_HIGH>; - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - gpio-ranges = <&tlmm 0 0 127>; - - sdc2_on_state: sdc2-on-state { - clk { - pins = "sdc2_clk"; - bias-disable; - drive-strength = <16>; - }; - - cmd { - pins = "sdc2_cmd"; - bias-pull-up; - drive-strength = <10>; - }; - - data { - pins = "sdc2_data"; - bias-pull-up; - drive-strength = <10>; - }; - }; - }; |