diff options
Diffstat (limited to 'dts/Bindings/pinctrl/qcom,sc7280-pinctrl.yaml')
-rw-r--r-- | dts/Bindings/pinctrl/qcom,sc7280-pinctrl.yaml | 44 |
1 files changed, 6 insertions, 38 deletions
diff --git a/dts/Bindings/pinctrl/qcom,sc7280-pinctrl.yaml b/dts/Bindings/pinctrl/qcom,sc7280-pinctrl.yaml index 36502173cb..5329fe2a43 100644 --- a/dts/Bindings/pinctrl/qcom,sc7280-pinctrl.yaml +++ b/dts/Bindings/pinctrl/qcom,sc7280-pinctrl.yaml @@ -23,29 +23,13 @@ properties: description: Specifies the TLMM summary IRQ maxItems: 1 - interrupt-controller: true - - '#interrupt-cells': - description: - Specifies the PIN numbers and Flags, as defined in defined in - include/dt-bindings/interrupt-controller/irq.h - const: 2 - - gpio-controller: true - - '#gpio-cells': - description: Specifying the pin number and flags, as defined in - include/dt-bindings/gpio/gpio.h - const: 2 - - gpio-ranges: - maxItems: 1 + gpio-reserved-ranges: + minItems: 1 + maxItems: 88 gpio-line-names: maxItems: 175 - wakeup-parent: true - patternProperties: "-state$": oneOf: @@ -62,6 +46,7 @@ $defs: Pinctrl node's client devices use subnodes for desired pin configuration. Client device subnodes use below standard properties. $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state + unevaluatedProperties: false properties: pins: @@ -110,34 +95,17 @@ $defs: uim1_clk, uim1_data, uim1_present, uim1_reset, usb2phy_ac, usb_phy, vfr_0, vfr_1, vsense_trigger ] - bias-pull-down: true - bias-pull-up: true - bias-bus-hold: true - bias-disable: true - drive-strength: true - input-enable: true - output-high: true - output-low: true - required: - pins - additionalProperties: false - allOf: - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml# required: - compatible - reg - - interrupts - - interrupt-controller - - '#interrupt-cells' - - gpio-controller - - '#gpio-cells' - - gpio-ranges - -additionalProperties: false + +unevaluatedProperties: false examples: - | |