diff options
Diffstat (limited to 'dts/Bindings/pinctrl/qcom,sm8350-pinctrl.yaml')
| -rw-r--r-- | dts/Bindings/pinctrl/qcom,sm8350-pinctrl.yaml | 73 |
1 files changed, 41 insertions, 32 deletions
diff --git a/dts/Bindings/pinctrl/qcom,sm8350-pinctrl.yaml b/dts/Bindings/pinctrl/qcom,sm8350-pinctrl.yaml index 6b7789db2f..6ae5571f60 100644 --- a/dts/Bindings/pinctrl/qcom,sm8350-pinctrl.yaml +++ b/dts/Bindings/pinctrl/qcom,sm8350-pinctrl.yaml @@ -44,8 +44,9 @@ patternProperties: oneOf: - $ref: "#/$defs/qcom-sm8350-tlmm-state" - patternProperties: - ".*": + "-pins$": $ref: "#/$defs/qcom-sm8350-tlmm-state" + additionalProperties: false $defs: qcom-sm8350-tlmm-state: @@ -53,7 +54,6 @@ $defs: description: Pinctrl node's client devices use subnodes for desired pin configuration. Client device subnodes use below standard properties. - $ref: "qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state" properties: pins: @@ -107,40 +107,49 @@ $defs: required: - pins - - function + + allOf: + - $ref: "qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state" + - if: + properties: + pins: + pattern: "^gpio([0-9]|[1-9][0-9]|1[0-9][0-9]|20[0-3])$" + then: + required: + - function additionalProperties: false examples: - | - #include <dt-bindings/interrupt-controller/arm-gic.h> - pinctrl@f100000 { - compatible = "qcom,sm8350-tlmm"; - reg = <0x0f100000 0x300000>; - interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - gpio-ranges = <&tlmm 0 0 203>; - - gpio-wo-subnode-state { - pins = "gpio1"; - function = "gpio"; - }; - - uart-w-subnodes-state { - rx { - pins = "gpio18"; - function = "qup3"; - bias-pull-up; - }; - - tx { - pins = "gpio19"; - function = "qup3"; - bias-disable; - }; - }; + #include <dt-bindings/interrupt-controller/arm-gic.h> + pinctrl@f100000 { + compatible = "qcom,sm8350-tlmm"; + reg = <0x0f100000 0x300000>; + interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + gpio-ranges = <&tlmm 0 0 203>; + + gpio-wo-subnode-state { + pins = "gpio1"; + function = "gpio"; + }; + + uart-w-subnodes-state { + rx-pins { + pins = "gpio18"; + function = "qup3"; + bias-pull-up; + }; + + tx-pins { + pins = "gpio19"; + function = "qup3"; + bias-disable; + }; }; + }; ... |