diff options
Diffstat (limited to 'dts/Bindings/power/reset')
| -rw-r--r-- | dts/Bindings/power/reset/atmel,at91sam9260-shdwc.yaml | 82 | ||||
| -rw-r--r-- | dts/Bindings/power/reset/atmel,sama5d2-shdwc.yaml | 114 | ||||
| -rw-r--r-- | dts/Bindings/power/reset/brcm,bcm21664-resetmgr.txt | 14 | ||||
| -rw-r--r-- | dts/Bindings/power/reset/brcm,bcm21664-resetmgr.yaml | 31 | ||||
| -rw-r--r-- | dts/Bindings/power/reset/gpio-poweroff.yaml | 8 | ||||
| -rw-r--r-- | dts/Bindings/power/reset/gpio-restart.yaml | 15 | ||||
| -rw-r--r-- | dts/Bindings/power/reset/msm-poweroff.txt | 17 | ||||
| -rw-r--r-- | dts/Bindings/power/reset/nvmem-reboot-mode.txt | 26 | ||||
| -rw-r--r-- | dts/Bindings/power/reset/nvmem-reboot-mode.yaml | 50 | ||||
| -rw-r--r-- | dts/Bindings/power/reset/qcom,pon.yaml | 89 | ||||
| -rw-r--r-- | dts/Bindings/power/reset/qcom,pshold.yaml | 35 | ||||
| -rw-r--r-- | dts/Bindings/power/reset/regulator-poweroff.yaml | 2 | ||||
| -rw-r--r-- | dts/Bindings/power/reset/restart-handler.yaml | 30 | ||||
| -rw-r--r-- | dts/Bindings/power/reset/syscon-poweroff.yaml | 10 | ||||
| -rw-r--r-- | dts/Bindings/power/reset/syscon-reboot-mode.yaml | 8 | ||||
| -rw-r--r-- | dts/Bindings/power/reset/syscon-reboot.yaml | 4 | ||||
| -rw-r--r-- | dts/Bindings/power/reset/xlnx,zynqmp-power.yaml | 10 |
17 files changed, 451 insertions, 94 deletions
diff --git a/dts/Bindings/power/reset/atmel,at91sam9260-shdwc.yaml b/dts/Bindings/power/reset/atmel,at91sam9260-shdwc.yaml new file mode 100644 index 0000000000..f559a2cfd8 --- /dev/null +++ b/dts/Bindings/power/reset/atmel,at91sam9260-shdwc.yaml @@ -0,0 +1,82 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/power/reset/atmel,at91sam9260-shdwc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Microchip AT91 SHDWC Shutdown Controller + +maintainers: + - Claudiu Beznea <claudiu.beznea@microchip.com> + +description: | + Microchip AT91 SHDWC shutdown controller controls the power supplies VDDIO + and VDDCORE and the wake-up detection on debounced input lines. + +properties: + compatible: + enum: + - atmel,at91sam9260-shdwc + - atmel,at91sam9rl-shdwc + - atmel,at91sam9x5-shdwc + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + + atmel,wakeup-mode: + description: operation mode of the wakeup mode + $ref: /schemas/types.yaml#/definitions/string + enum: [ none, high, low, any ] + + atmel,wakeup-counter: + description: counter on wake-up 0 + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 15 + + atmel,wakeup-rtt-timer: + description: enable real-time timer wake-up + type: boolean + + atmel,wakeup-rtc-timer: + description: enable real-time clock wake-up + type: boolean + +required: + - compatible + - reg + - clocks + +allOf: + - if: + properties: + compatible: + contains: + const: atmel,at91sam9x5-shdwc + then: + properties: + atmel,wakeup-rtt-timer: false + + - if: + properties: + compatible: + contains: + const: atmel,at91sam9260-shdwc + then: + properties: + atmel,wakeup-rtc-timer: false + +additionalProperties: false + +examples: + - | + shdwc: poweroff@fffffd10 { + compatible = "atmel,at91sam9260-shdwc"; + reg = <0xfffffd10 0x10>; + clocks = <&clk32k>; + }; + +... diff --git a/dts/Bindings/power/reset/atmel,sama5d2-shdwc.yaml b/dts/Bindings/power/reset/atmel,sama5d2-shdwc.yaml new file mode 100644 index 0000000000..8c58e12cdb --- /dev/null +++ b/dts/Bindings/power/reset/atmel,sama5d2-shdwc.yaml @@ -0,0 +1,114 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/power/reset/atmel,sama5d2-shdwc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Microchip AT91 SAMA5D2 SHDWC Shutdown Controller + +maintainers: + - Claudiu Beznea <claudiu.beznea@microchip.com> + +description: | + Microchip AT91 SHDWC shutdown controller controls the power supplies VDDIO + and VDDCORE and the wake-up detection on debounced input lines. + +properties: + compatible: + oneOf: + - items: + - const: microchip,sama7g5-shdwc + - const: syscon + - enum: + - atmel,sama5d2-shdwc + - microchip,sam9x60-shdwc + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + + "#address-cells": + const: 1 + + "#size-cells": + const: 0 + + debounce-delay-us: + description: + Minimum wake-up inputs debouncer period in microseconds. It is usually a + board-related property. + + atmel,wakeup-rtc-timer: + description: enable real-time clock wake-up + type: boolean + + atmel,wakeup-rtt-timer: + description: enable real-time timer wake-up + type: boolean + +patternProperties: + "^input@[0-15]$": + description: + Wake-up input nodes. These are usually described in the "board" part of + the Device Tree. Note also that input 0 is linked to the wake-up pin and + is frequently used. + type: object + properties: + reg: + description: contains the wake-up input index + minimum: 0 + maximum: 15 + + atmel,wakeup-active-high: + description: + The corresponding wake-up input described by the child forces the + wake-up of the core power supply on a high level. The default is to + be active low. + type: boolean + + required: + - reg + + additionalProperties: false + +required: + - compatible + - reg + - clocks + +allOf: + - if: + properties: + compatible: + contains: + const: atmel,sama5d2-shdwc + then: + properties: + atmel,wakeup-rtt-timer: false + +additionalProperties: false + +examples: + - | + shdwc: poweroff@f8048010 { + compatible = "atmel,sama5d2-shdwc"; + reg = <0xf8048010 0x10>; + clocks = <&clk32k>; + #address-cells = <1>; + #size-cells = <0>; + atmel,wakeup-rtc-timer; + debounce-delay-us = <976>; + + input@0 { + reg = <0>; + }; + + input@1 { + reg = <1>; + atmel,wakeup-active-high; + }; + }; + +... diff --git a/dts/Bindings/power/reset/brcm,bcm21664-resetmgr.txt b/dts/Bindings/power/reset/brcm,bcm21664-resetmgr.txt deleted file mode 100644 index 93f31ca1ef..0000000000 --- a/dts/Bindings/power/reset/brcm,bcm21664-resetmgr.txt +++ /dev/null @@ -1,14 +0,0 @@ -Broadcom Kona Family Reset Manager ----------------------------------- - -The reset manager is used on the Broadcom BCM21664 SoC. - -Required properties: - - compatible: brcm,bcm21664-resetmgr - - reg: memory address & range - -Example: - brcm,resetmgr@35001f00 { - compatible = "brcm,bcm21664-resetmgr"; - reg = <0x35001f00 0x24>; - }; diff --git a/dts/Bindings/power/reset/brcm,bcm21664-resetmgr.yaml b/dts/Bindings/power/reset/brcm,bcm21664-resetmgr.yaml new file mode 100644 index 0000000000..3e28a59d71 --- /dev/null +++ b/dts/Bindings/power/reset/brcm,bcm21664-resetmgr.yaml @@ -0,0 +1,31 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/power/reset/brcm,bcm21664-resetmgr.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Broadcom Kona family reset manager + +maintainers: + - Florian Fainelli <f.fainelli@gmail.com> + +properties: + compatible: + const: brcm,bcm21664-resetmgr + + reg: + maxItems: 1 + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + reset-controller@35001f00 { + compatible = "brcm,bcm21664-resetmgr"; + reg = <0x35001f00 0x24>; + }; +... diff --git a/dts/Bindings/power/reset/gpio-poweroff.yaml b/dts/Bindings/power/reset/gpio-poweroff.yaml index 45d66c7751..a4b437fce3 100644 --- a/dts/Bindings/power/reset/gpio-poweroff.yaml +++ b/dts/Bindings/power/reset/gpio-poweroff.yaml @@ -1,4 +1,4 @@ -# SPDX-License-Identifier: (GPL-2.0-only or BSD-2-Clause) +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) %YAML 1.2 --- $id: http://devicetree.org/schemas/power/reset/gpio-poweroff.yaml# @@ -18,6 +18,9 @@ description: > Finally the operating system assumes the power off failed if the system is still running after waiting some time (timeout-ms). +allOf: + - $ref: restart-handler.yaml# + properties: compatible: const: gpio-poweroff @@ -40,6 +43,9 @@ properties: default: 100 description: Delay to wait after driving gpio inactive + priority: + default: 0 + timeout-ms: default: 3000 description: Time to wait before assuming the power off sequence failed. diff --git a/dts/Bindings/power/reset/gpio-restart.yaml b/dts/Bindings/power/reset/gpio-restart.yaml index a72d5c7215..53535de0d4 100644 --- a/dts/Bindings/power/reset/gpio-restart.yaml +++ b/dts/Bindings/power/reset/gpio-restart.yaml @@ -1,4 +1,4 @@ -# SPDX-License-Identifier: (GPL-2.0-only or BSD-2-Clause) +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) %YAML 1.2 --- $id: http://devicetree.org/schemas/power/reset/gpio-restart.yaml# @@ -25,6 +25,9 @@ description: > inactive-delay, the GPIO is driven active again. After a delay specified by wait-delay, the restart handler completes allowing other restart handlers to be attempted. +allOf: + - $ref: restart-handler.yaml# + properties: compatible: const: gpio-restart @@ -41,16 +44,6 @@ properties: in its inactive state. priority: - $ref: /schemas/types.yaml#/definitions/uint32 - description: | - A priority ranging from 0 to 255 (default 129) according to the following guidelines: - - 0: Restart handler of last resort, with limited restart capabilities. - 128: Default restart handler; use if no other restart handler is expected to be available, - and/or if restart functionality is sufficient to restart the entire system. - 255: Highest priority restart handler, will preempt all other restart handlers. - minimum: 0 - maximum: 255 default: 129 active-delay: diff --git a/dts/Bindings/power/reset/msm-poweroff.txt b/dts/Bindings/power/reset/msm-poweroff.txt deleted file mode 100644 index ce44ad3575..0000000000 --- a/dts/Bindings/power/reset/msm-poweroff.txt +++ /dev/null @@ -1,17 +0,0 @@ -MSM Restart Driver - -A power supply hold (ps-hold) bit is set to power the msm chipsets. -Clearing that bit allows us to restart/poweroff. The difference -between poweroff and restart is determined by unique power manager IC -settings. - -Required Properties: --compatible: "qcom,pshold" --reg: Specifies the physical address of the ps-hold register - -Example: - - restart@fc4ab000 { - compatible = "qcom,pshold"; - reg = <0xfc4ab000 0x4>; - }; diff --git a/dts/Bindings/power/reset/nvmem-reboot-mode.txt b/dts/Bindings/power/reset/nvmem-reboot-mode.txt deleted file mode 100644 index 752d6126d5..0000000000 --- a/dts/Bindings/power/reset/nvmem-reboot-mode.txt +++ /dev/null @@ -1,26 +0,0 @@ -NVMEM reboot mode driver - -This driver gets reboot mode magic value from reboot-mode driver -and stores it in a NVMEM cell named "reboot-mode". Then the bootloader -can read it and take different action according to the magic -value stored. - -Required properties: -- compatible: should be "nvmem-reboot-mode". -- nvmem-cells: A phandle to the reboot mode provided by a nvmem device. -- nvmem-cell-names: Should be "reboot-mode". - -The rest of the properties should follow the generic reboot-mode description -found in reboot-mode.txt - -Example: - reboot-mode { - compatible = "nvmem-reboot-mode"; - nvmem-cells = <&reboot_mode>; - nvmem-cell-names = "reboot-mode"; - - mode-normal = <0xAAAA5501>; - mode-bootloader = <0xBBBB5500>; - mode-recovery = <0xCCCC5502>; - mode-test = <0xDDDD5503>; - }; diff --git a/dts/Bindings/power/reset/nvmem-reboot-mode.yaml b/dts/Bindings/power/reset/nvmem-reboot-mode.yaml new file mode 100644 index 0000000000..627f8a6078 --- /dev/null +++ b/dts/Bindings/power/reset/nvmem-reboot-mode.yaml @@ -0,0 +1,50 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/power/reset/nvmem-reboot-mode.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Generic NVMEM reboot mode + +maintainers: + - Bartosz Golaszewski <bartosz.golaszewski@linaro.org> + +description: + This driver gets the reboot mode magic value from the reboot-mode driver + and stores it in the NVMEM cell named "reboot-mode". The bootloader can + then read it and take different action according to the value. + +properties: + compatible: + const: nvmem-reboot-mode + + nvmem-cells: + description: + A phandle pointing to the nvmem-cells node where the vendor-specific + magic value representing the reboot mode is stored. + maxItems: 1 + + nvmem-cell-names: + items: + - const: reboot-mode + +allOf: + - $ref: reboot-mode.yaml# + +required: + - compatible + - nvmem-cells + - nvmem-cell-names + +unevaluatedProperties: false + +examples: + - | + reboot-mode { + compatible = "nvmem-reboot-mode"; + nvmem-cells = <&reboot_reason>; + nvmem-cell-names = "reboot-mode"; + mode-recovery = <0x01>; + mode-bootloader = <0x02>; + }; +... diff --git a/dts/Bindings/power/reset/qcom,pon.yaml b/dts/Bindings/power/reset/qcom,pon.yaml index 353f155df0..fc8105a7b9 100644 --- a/dts/Bindings/power/reset/qcom,pon.yaml +++ b/dts/Bindings/power/reset/qcom,pon.yaml @@ -15,26 +15,40 @@ description: | This DT node has pwrkey and resin as sub nodes. -allOf: - - $ref: reboot-mode.yaml# - properties: compatible: enum: - qcom,pm8916-pon + - qcom,pm8941-pon - qcom,pms405-pon - qcom,pm8998-pon + - qcom,pmk8350-pon reg: - maxItems: 1 + description: | + Specifies the SPMI base address for the PON (power-on) peripheral. For + PMICs that have the PON peripheral (GEN3) split into PON_HLOS and PON_PBS + (e.g. PMK8350), this can hold addresses of both PON_HLOS and PON_PBS + peripherals. In that case, the PON_PBS address needs to be specified to + facilitate software debouncing on some PMIC. + minItems: 1 + maxItems: 2 + + reg-names: + minItems: 1 + maxItems: 2 pwrkey: type: object - $ref: "../../input/qcom,pm8941-pwrkey.yaml#" + $ref: /schemas/input/qcom,pm8941-pwrkey.yaml# resin: type: object - $ref: "../../input/qcom,pm8941-pwrkey.yaml#" + $ref: /schemas/input/qcom,pm8941-pwrkey.yaml# + + watchdog: + type: object + $ref: /schemas/watchdog/qcom,pm8916-wdt.yaml required: - compatible @@ -42,26 +56,79 @@ required: unevaluatedProperties: false +allOf: + - if: + properties: + compatible: + contains: + enum: + - qcom,pm8916-pon + - qcom,pms405-pon + - qcom,pm8998-pon + then: + allOf: + - $ref: reboot-mode.yaml# + + properties: + reg: + maxItems: 1 + reg-names: + items: + - const: pon + + # Special case for pm8941, which doesn't store reset mode + - if: + properties: + compatible: + contains: + const: qcom,pm8941-pon + then: + properties: + reg: + maxItems: 1 + reg-names: + items: + - const: pon + + - if: + properties: + compatible: + contains: + const: qcom,pmk8350-pon + then: + properties: + reg: + minItems: 1 + maxItems: 2 + reg-names: + minItems: 1 + items: + - const: hlos + - const: pbs + examples: - | #include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/input/linux-event-codes.h> #include <dt-bindings/spmi/spmi.h> - spmi_bus: spmi@c440000 { + + spmi@c440000 { reg = <0x0c440000 0x1100>; #address-cells = <2>; #size-cells = <0>; - pmk8350: pmic@0 { + + pmic@0 { reg = <0x0 SPMI_USID>; #address-cells = <1>; #size-cells = <0>; - pmk8350_pon: pon_hlos@1300 { - reg = <0x1300>; + + pon@800 { compatible = "qcom,pm8998-pon"; + reg = <0x800>; pwrkey { compatible = "qcom,pm8941-pwrkey"; - interrupts = < 0x0 0x8 0 IRQ_TYPE_EDGE_BOTH >; + interrupts = <0x0 0x8 0 IRQ_TYPE_EDGE_BOTH>; debounce = <15625>; bias-pull-up; linux,code = <KEY_POWER>; diff --git a/dts/Bindings/power/reset/qcom,pshold.yaml b/dts/Bindings/power/reset/qcom,pshold.yaml new file mode 100644 index 0000000000..527962d54a --- /dev/null +++ b/dts/Bindings/power/reset/qcom,pshold.yaml @@ -0,0 +1,35 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/power/reset/qcom,pshold.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm SoC restart and power off + +maintainers: + - Bjorn Andersson <bjorn.andersson@linaro.org> + +description: + A power supply hold (ps-hold) bit is set to power the Qualcomm chipsets. + Clearing that bit allows us to restart/power off. The difference between + power off and restart is determined by unique power manager IC settings. + +properties: + compatible: + const: qcom,pshold + + reg: + maxItems: 1 + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + reset-controller@fc4ab000 { + compatible = "qcom,pshold"; + reg = <0xfc4ab000 0x4>; + }; diff --git a/dts/Bindings/power/reset/regulator-poweroff.yaml b/dts/Bindings/power/reset/regulator-poweroff.yaml index 03bd1fa5a6..e9417557cd 100644 --- a/dts/Bindings/power/reset/regulator-poweroff.yaml +++ b/dts/Bindings/power/reset/regulator-poweroff.yaml @@ -16,7 +16,7 @@ description: | properties: compatible: - const: "regulator-poweroff" + const: regulator-poweroff cpu-supply: description: diff --git a/dts/Bindings/power/reset/restart-handler.yaml b/dts/Bindings/power/reset/restart-handler.yaml new file mode 100644 index 0000000000..965a834a3d --- /dev/null +++ b/dts/Bindings/power/reset/restart-handler.yaml @@ -0,0 +1,30 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/power/reset/restart-handler.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Restart and shutdown handler Common Properties + +maintainers: + - Sebastian Reichel <sre@kernel.org> + +description: + Restart and shutdown handler device is responsible for powering off the + system, e.g. my cutting off the power. System might have several restart + handlers, which usually are tried from most precise to last resort. + +properties: + priority: + $ref: /schemas/types.yaml#/definitions/uint32 + description: | + A priority ranging from 0 to 255 according to the following guidelines:: + 0:: Restart handler of last resort, with limited restart capabilities. + 128:: Typical, default restart handler; use if no other restart handler + is expected to be available, and/or if restart functionality is + sufficient to restart the entire system. + 255:: Highest priority restart handler, will preempt all other restart handlers. + minimum: 0 + maximum: 255 + +additionalProperties: true diff --git a/dts/Bindings/power/reset/syscon-poweroff.yaml b/dts/Bindings/power/reset/syscon-poweroff.yaml index 3412fe7e1e..d342b113fc 100644 --- a/dts/Bindings/power/reset/syscon-poweroff.yaml +++ b/dts/Bindings/power/reset/syscon-poweroff.yaml @@ -15,6 +15,9 @@ description: |+ defined by the register map pointed by syscon reference plus the offset with the value and mask defined in the poweroff node. Default will be little endian mode, 32 bit access only. + The SYSCON register map is normally retrieved from the parental dt-node. So + the SYSCON poweroff node should be represented as a sub-node of a "syscon", + "simple-mfd" node. properties: compatible: @@ -30,7 +33,10 @@ properties: regmap: $ref: /schemas/types.yaml#/definitions/phandle - description: Phandle to the register map node. + deprecated: true + description: + Phandle to the register map node. This property is deprecated in favor of + the syscon-poweroff node being a child of a system controller node. value: $ref: /schemas/types.yaml#/definitions/uint32 @@ -38,7 +44,6 @@ properties: required: - compatible - - regmap - offset additionalProperties: false @@ -56,7 +61,6 @@ examples: - | poweroff { compatible = "syscon-poweroff"; - regmap = <®mapnode>; offset = <0x0>; mask = <0x7a>; }; diff --git a/dts/Bindings/power/reset/syscon-reboot-mode.yaml b/dts/Bindings/power/reset/syscon-reboot-mode.yaml index 9b1ffceefe..b6acff199c 100644 --- a/dts/Bindings/power/reset/syscon-reboot-mode.yaml +++ b/dts/Bindings/power/reset/syscon-reboot-mode.yaml @@ -29,12 +29,10 @@ properties: $ref: /schemas/types.yaml#/definitions/uint32 description: Offset in the register map for the mode register (in bytes) -patternProperties: - "^mode-.+": - $ref: /schemas/types.yaml#/definitions/uint32 - description: Vendor-specific mode value written to the mode register +allOf: + - $ref: reboot-mode.yaml# -additionalProperties: false +unevaluatedProperties: false required: - compatible diff --git a/dts/Bindings/power/reset/syscon-reboot.yaml b/dts/Bindings/power/reset/syscon-reboot.yaml index da25097248..75061124d9 100644 --- a/dts/Bindings/power/reset/syscon-reboot.yaml +++ b/dts/Bindings/power/reset/syscon-reboot.yaml @@ -42,6 +42,9 @@ properties: $ref: /schemas/types.yaml#/definitions/uint32 description: The reset value written to the reboot register (32 bit access). + priority: + default: 192 + required: - compatible - offset @@ -49,6 +52,7 @@ required: additionalProperties: false allOf: + - $ref: restart-handler.yaml# - if: not: required: diff --git a/dts/Bindings/power/reset/xlnx,zynqmp-power.yaml b/dts/Bindings/power/reset/xlnx,zynqmp-power.yaml index 68d7c14a71..7998316361 100644 --- a/dts/Bindings/power/reset/xlnx,zynqmp-power.yaml +++ b/dts/Bindings/power/reset/xlnx,zynqmp-power.yaml @@ -4,10 +4,10 @@ $id: http://devicetree.org/schemas/power/reset/xlnx,zynqmp-power.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# -title: Xilinx Zynq MPSoC Power Management Device Tree Bindings +title: Xilinx Zynq MPSoC Power Management maintainers: - - Michal Simek <michal.simek@xilinx.com> + - Michal Simek <michal.simek@amd.com> description: | The zynqmp-power node describes the power management configurations. @@ -15,7 +15,7 @@ description: | properties: compatible: - const: "xlnx,zynqmp-power" + const: xlnx,zynqmp-power interrupts: maxItems: 1 @@ -57,7 +57,7 @@ examples: firmware { zynqmp-firmware { - zynqmp-power { + power-management { compatible = "xlnx,zynqmp-power"; interrupts = <0 35 4>; }; @@ -70,7 +70,7 @@ examples: firmware { zynqmp-firmware { - zynqmp-power { + power-management { compatible = "xlnx,zynqmp-power"; interrupt-parent = <&gic>; interrupts = <0 35 4>; |