1 files changed, 0 insertions, 47 deletions
diff --git a/dts/Bindings/power/supply/bq2415x.txt b/dts/Bindings/power/supply/bq2415x.txt
deleted file mode 100644
index d0327f0b59..0000000000
--- a/dts/Bindings/power/supply/bq2415x.txt
+++ /dev/null
@@ -1,47 +0,0 @@
-Binding for TI bq2415x Li-Ion Charger
-
-Required properties:
-- compatible: Should contain one of the following:
- * "ti,bq24150"
- * "ti,bq24150"
- * "ti,bq24150a"
- * "ti,bq24151"
- * "ti,bq24151a"
- * "ti,bq24152"
- * "ti,bq24153"
- * "ti,bq24153a"
- * "ti,bq24155"
- * "ti,bq24156"
- * "ti,bq24156a"
- * "ti,bq24158"
-- reg:			   integer, i2c address of the device.
-- ti,current-limit:	   integer, initial maximum current charger can pull
-			   from power supply in mA.
-- ti,weak-battery-voltage: integer, weak battery voltage threshold in mV.
-			   The chip will use slow precharge if battery voltage
-			   is below this value.
-- ti,battery-regulation-voltage: integer, maximum charging voltage in mV.
-- ti,charge-current:	   integer, maximum charging current in mA.
-- ti,termination-current:  integer, charge will be terminated when current in
-			   constant-voltage phase drops below this value (in mA).
-- ti,resistor-sense:	   integer, value of sensing resistor in milliohm.
-
-Optional properties:
-- ti,usb-charger-detection: phandle to usb charger detection device.
-			    (required for auto mode)
-
-Example from Nokia N900:
-
-bq24150a {
-	compatible = "ti,bq24150a";
-	reg = <0x6b>;
-
-	ti,current-limit = <100>;
-	ti,weak-battery-voltage = <3400>;
-	ti,battery-regulation-voltage = <4200>;
-	ti,charge-current = <650>;
-	ti,termination-current = <100>;
-	ti,resistor-sense = <68>;
-
-	ti,usb-charger-detection = <&isp1704>;
-};