diff options
Diffstat (limited to 'dts/Bindings/regulator/dlg,da9121.yaml')
| -rw-r--r-- | dts/Bindings/regulator/dlg,da9121.yaml | 189 |
1 files changed, 189 insertions, 0 deletions
diff --git a/dts/Bindings/regulator/dlg,da9121.yaml b/dts/Bindings/regulator/dlg,da9121.yaml new file mode 100644 index 0000000000..6f2164f7bc --- /dev/null +++ b/dts/Bindings/regulator/dlg,da9121.yaml @@ -0,0 +1,189 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/regulator/dlg,da9121.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Dialog Semiconductor DA9121 voltage regulator + +maintainers: + - Adam Ward <Adam.Ward.opensource@diasemi.com> + +description: | + Dialog Semiconductor DA9121 Single-channel 10A double-phase buck converter + Dialog Semiconductor DA9122 Double-channel 5A single-phase buck converter + Dialog Semiconductor DA9220 Double-channel 3A single-phase buck converter + Dialog Semiconductor DA9217 Single-channel 6A double-phase buck converter + Dialog Semiconductor DA9130 Single-channel 10A double-phase buck converter + Dialog Semiconductor DA9131 Double-channel 5A single-phase buck converter + Dialog Semiconductor DA9132 Double-channel 3A single-phase buck converter + + Current limits + + This is PER PHASE, and the current limit setting in the devices reflect + that with a maximum 10A limit. Allowing for transients at/near double + the rated current, this translates across the device range to per + channel figures as so... + + | DA9121 DA9122 DA9220 DA9217 DA9140 + | /DA9130 /DA9131 /DA9132 + ----------------------------------------------------------------------------- + Output current / channel | 10000000 5000000 3000000 6000000 40000000 + Output current / phase | 5000000 5000000 3000000 3000000 9500000 + ----------------------------------------------------------------------------- + Min regulator-min-microvolt| 300000 300000 300000 300000 500000 + Max regulator-max-microvolt| 1900000 1900000 1900000 1900000 1000000 + Device hardware default | 1000000 1000000 1000000 1000000 1000000 + ----------------------------------------------------------------------------- + Min regulator-min-microamp | 7000000 3500000 3500000 7000000 26000000 + Max regulator-max-microamp | 20000000 10000000 6000000 12000000 78000000 + Device hardware default | 15000000 7500000 5500000 11000000 58000000 + +properties: + $nodename: + pattern: "pmic@[0-9a-f]{1,2}" + compatible: + enum: + - dlg,da9121 + - dlg,da9122 + - dlg,da9220 + - dlg,da9217 + - dlg,da9130 + - dlg,da9131 + - dlg,da9132 + - dlg,da9140 + + reg: + maxItems: 1 + description: Specifies the I2C slave address. + + interrupts: + maxItems: 1 + description: IRQ line information. + + dlg,irq-polling-delay-passive-ms: + $ref: "/schemas/types.yaml#/definitions/uint32" + minimum: 1000 + maximum: 10000 + description: | + Specify the polling period, measured in milliseconds, between interrupt status + update checks. Range 1000-10000 ms. + + regulators: + type: object + $ref: regulator.yaml# + description: | + This node defines the settings for the BUCK. The content of the + sub-node is defined by the standard binding for regulators; see regulator.yaml. + The DA9121 regulator is bound using their names listed below + buck1 - BUCK1 + buck2 - BUCK2 //DA9122, DA9220, DA9131, DA9132 only + + patternProperties: + "^buck([1-2])$": + type: object + $ref: regulator.yaml# + + properties: + regulator-mode: + maxItems: 1 + description: Defined in include/dt-bindings/regulator/dlg,da9121-regulator.h + + regulator-initial-mode: + maxItems: 1 + description: Defined in include/dt-bindings/regulator/dlg,da9121-regulator.h + + enable-gpios: + maxItems: 1 + description: Specify a valid GPIO for platform control of the regulator + + dlg,ripple-cancel: + $ref: "/schemas/types.yaml#/definitions/uint32" + description: | + Defined in include/dt-bindings/regulator/dlg,da9121-regulator.h + Only present on multi-channel devices (DA9122, DA9220, DA9131, DA9132) + + unevaluatedProperties: false + +required: + - compatible + - reg + - regulators + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/interrupt-controller/irq.h> + #include <dt-bindings/regulator/dlg,da9121-regulator.h> + i2c { + #address-cells = <1>; + #size-cells = <0>; + pmic@68 { + compatible = "dlg,da9121"; + reg = <0x68>; + + interrupt-parent = <&gpio6>; + interrupts = <11 IRQ_TYPE_LEVEL_LOW>; + + dlg,irq-polling-delay-passive-ms = <2000>; + + regulators { + DA9121_BUCK1: buck1 { + regulator-name = "BUCK1"; + regulator-min-microvolt = <300000>; + regulator-max-microvolt = <1900000>; + regulator-min-microamp = <7000000>; + regulator-max-microamp = <20000000>; + regulator-boot-on; + regulator-initial-mode = <DA9121_BUCK_MODE_AUTO>; + enable-gpios = <&gpio 1 GPIO_ACTIVE_HIGH>; + }; + }; + }; + }; + + - | + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/interrupt-controller/irq.h> + #include <dt-bindings/regulator/dlg,da9121-regulator.h> + i2c { + #address-cells = <1>; + #size-cells = <0>; + pmic@68 { + compatible = "dlg,da9122"; + reg = <0x68>; + + interrupt-parent = <&gpio6>; + interrupts = <11 IRQ_TYPE_LEVEL_LOW>; + + dlg,irq-polling-delay-passive-ms = <2000>; + + regulators { + DA9122_BUCK1: buck1 { + regulator-name = "BUCK1"; + regulator-min-microvolt = <300000>; + regulator-max-microvolt = <1900000>; + regulator-min-microamp = <3500000>; + regulator-max-microamp = <10000000>; + regulator-boot-on; + regulator-initial-mode = <DA9121_BUCK_MODE_AUTO>; + enable-gpios = <&gpio6 1 GPIO_ACTIVE_HIGH>; + dlg,ripple-cancel = <DA9121_BUCK_RIPPLE_CANCEL_NONE>; + }; + DA9122_BUCK2: buck2 { + regulator-name = "BUCK2"; + regulator-min-microvolt = <300000>; + regulator-max-microvolt = <1900000>; + regulator-min-microamp = <3500000>; + regulator-max-microamp = <10000000>; + regulator-boot-on; + regulator-initial-mode = <DA9121_BUCK_MODE_AUTO>; + enable-gpios = <&gpio6 2 GPIO_ACTIVE_HIGH>; + dlg,ripple-cancel = <DA9121_BUCK_RIPPLE_CANCEL_NONE>; + }; + }; + }; + }; +... |