diff options
Diffstat (limited to 'dts/Bindings/remoteproc/qcom,q6v5.txt')
| -rw-r--r-- | dts/Bindings/remoteproc/qcom,q6v5.txt | 90 |
1 files changed, 26 insertions, 64 deletions
diff --git a/dts/Bindings/remoteproc/qcom,q6v5.txt b/dts/Bindings/remoteproc/qcom,q6v5.txt index b677900b3a..d0ebd16ee0 100644 --- a/dts/Bindings/remoteproc/qcom,q6v5.txt +++ b/dts/Bindings/remoteproc/qcom,q6v5.txt @@ -14,8 +14,6 @@ on the Qualcomm Hexagon core. "qcom,msm8974-mss-pil" "qcom,msm8996-mss-pil" "qcom,msm8998-mss-pil" - "qcom,sc7180-mss-pil" - "qcom,sc7280-mss-pil" "qcom,sdm845-mss-pil" - reg: @@ -37,7 +35,7 @@ on the Qualcomm Hexagon core. - interrupt-names: Usage: required Value type: <stringlist> - Definition: The interrupts needed depends on the the compatible + Definition: The interrupts needed depends on the compatible string: qcom,q6v5-pil: qcom,ipq8074-wcss-pil: @@ -47,8 +45,6 @@ on the Qualcomm Hexagon core. must be "wdog", "fatal", "ready", "handover", "stop-ack" qcom,msm8996-mss-pil: qcom,msm8998-mss-pil: - qcom,sc7180-mss-pil: - qcom,sc7280-mss-pil: qcom,sdm845-mss-pil: must be "wdog", "fatal", "ready", "handover", "stop-ack", "shutdown-ack" @@ -86,11 +82,6 @@ on the Qualcomm Hexagon core. qcom,msm8998-mss-pil: must be "iface", "bus", "mem", "xo", "gpll0_mss", "snoc_axi", "mnoc_axi", "qdss" - qcom,sc7180-mss-pil: - must be "iface", "bus", "xo", "snoc_axi", "mnoc_axi", - "nav" - qcom,sc7280-mss-pil: - must be "iface", "xo", "snoc_axi", "offline", "pka" qcom,sdm845-mss-pil: must be "iface", "bus", "mem", "xo", "gpll0_mss", "snoc_axi", "mnoc_axi", "prng" @@ -102,7 +93,7 @@ on the Qualcomm Hexagon core. reference to the list of 3 reset-controllers for the wcss sub-system reference to the list of 2 reset-controllers for the modem - sub-system on SC7180, SC7280, SDM845 SoCs + sub-system on SDM845 SoCs - reset-names: Usage: required @@ -111,7 +102,7 @@ on the Qualcomm Hexagon core. must be "wcss_aon_reset", "wcss_reset", "wcss_q6_reset" for the wcss sub-system must be "mss_restart", "pdc_reset" for the modem - sub-system on SC7180, SC7280, SDM845 SoCs + sub-system on SDM845 SoCs For devices where the mba and mpss sub-nodes are not specified, mba/mpss region should be referenced as follows: @@ -176,10 +167,6 @@ For the compatible string below the following supplies are required: qcom,msm8996-mss-pil: qcom,msm8998-mss-pil: must be "cx", "mx" - qcom,sc7180-mss-pil: - must be "cx", "mx", "mss" - qcom,sc7280-mss-pil: - must be "cx", "mss" qcom,sdm845-mss-pil: must be "cx", "mx", "mss" @@ -205,36 +192,6 @@ For the compatible string below the following supplies are required: Definition: a phandle reference to a syscon representing TCSR followed by the three offsets within syscon for q6, modem and nc halt registers. - a phandle reference to a syscon representing TCSR followed - by the four offsets within syscon for q6, modem, nc and vq6 - halt registers on SC7280 SoCs. - -For the compatible strings below the following phandle references are required: - "qcom,sc7180-mss-pil" -- qcom,spare-regs: - Usage: required - Value type: <prop-encoded-array> - Definition: a phandle reference to a syscon representing TCSR followed - by the offset within syscon for conn_box_spare0 register - used by the modem sub-system running on SC7180 SoC. - -For the compatible strings below the following phandle references are required: - "qcom,sc7280-mss-pil" -- qcom,ext-regs: - Usage: required - Value type: <prop-encoded-array> - Definition: two phandle references to syscons representing TCSR_REG and - TCSR register space followed by the two offsets within the syscon - to force_clk_en/rscc_disable and axim1_clk_off/crypto_clk_off - registers respectively. - -- qcom,qaccept-regs: - Usage: required - Value type: <prop-encoded-array> - Definition: a phandle reference to a syscon representing TCSR followed - by the three offsets within syscon for mdm, cx and axi - qaccept registers used by the modem sub-system running on - SC7280 SoC. The Hexagon node must contain iommus property as described in ../iommu/iommu.txt on platforms which do not have TrustZone. @@ -257,29 +214,23 @@ related to the Hexagon. See ../soc/qcom/qcom,smd.yaml and The following example describes the resources needed to boot control the Hexagon, as it is found on MSM8974 boards. - modem-rproc@fc880000 { - compatible = "qcom,q6v5-pil"; - reg = <0xfc880000 0x100>, - <0xfc820000 0x020>; + remoteproc@fc880000 { + compatible = "qcom,msm8974-mss-pil"; + reg = <0xfc880000 0x100>, <0xfc820000 0x020>; reg-names = "qdsp6", "rmb"; - interrupts-extended = <&intc 0 24 1>, - <&modem_smp2p_in 0 0>, - <&modem_smp2p_in 1 0>, - <&modem_smp2p_in 2 0>, - <&modem_smp2p_in 3 0>; - interrupt-names = "wdog", - "fatal", - "ready", - "handover", - "stop-ack"; + interrupts-extended = <&intc GIC_SPI 24 IRQ_TYPE_EDGE_RISING>, + <&modem_smp2p_in 0 IRQ_TYPE_EDGE_RISING>, + <&modem_smp2p_in 1 IRQ_TYPE_EDGE_RISING>, + <&modem_smp2p_in 2 IRQ_TYPE_EDGE_RISING>, + <&modem_smp2p_in 3 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "wdog", "fatal", "ready", "handover", "stop-ack"; clocks = <&gcc GCC_MSS_Q6_BIMC_AXI_CLK>, <&gcc GCC_MSS_CFG_AHB_CLK>, - <&gcc GCC_BOOT_ROM_AHB_CLK>; - clock-names = "iface", "bus", "mem"; - - qcom,halt-regs = <&tcsr_mutex_block 0x1180 0x1200 0x1280>; + <&gcc GCC_BOOT_ROM_AHB_CLK>, + <&xo_board>; + clock-names = "iface", "bus", "mem", "xo"; resets = <&gcc GCC_MSS_RESTART>; reset-names = "mss_restart"; @@ -289,6 +240,8 @@ Hexagon, as it is found on MSM8974 boards. mx-supply = <&pm8841_s1>; pll-supply = <&pm8941_l12>; + qcom,halt-regs = <&tcsr_mutex_block 0x1180 0x1200 0x1280>; + qcom,smem-states = <&modem_smp2p_out 0>; qcom,smem-state-names = "stop"; @@ -299,4 +252,13 @@ Hexagon, as it is found on MSM8974 boards. mpss { memory-region = <&mpss_region>; }; + + smd-edge { + interrupts = <GIC_SPI 25 IRQ_TYPE_EDGE_RISING>; + + qcom,ipc = <&apcs 8 12>; + qcom,smd-edge = <0>; + + label = "modem"; + }; }; |