1 files changed, 100 insertions, 0 deletions
diff --git a/dts/Bindings/reserved-memory/reserved-memory.yaml b/dts/Bindings/reserved-memory/reserved-memory.yaml
new file mode 100644
index 0000000000..7a0744052f
--- /dev/null
+++ b/dts/Bindings/reserved-memory/reserved-memory.yaml
@@ -0,0 +1,100 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/reserved-memory/reserved-memory.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: /reserved-memory Child Node Common Device Tree Bindings
+
+maintainers:
+  - devicetree-spec@vger.kernel.org
+
+description: >
+  Reserved memory is specified as a node under the /reserved-memory node. The
+  operating system shall exclude reserved memory from normal usage one can
+  create child nodes describing particular reserved (excluded from normal use)
+  memory regions. Such memory regions are usually designed for the special
+  usage by various device drivers.
+
+  Each child of the reserved-memory node specifies one or more regions
+  of reserved memory. Each child node may either use a 'reg' property to
+  specify a specific range of reserved memory, or a 'size' property with
+  optional constraints to request a dynamically allocated block of
+  memory.
+
+  Following the generic-names recommended practice, node names should
+  reflect the purpose of the node (ie. "framebuffer" or "dma-pool").
+  Unit address (@<address>) should be appended to the name if the node
+  is a static allocation.
+
+properties:
+  reg: true
+
+  size:
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    minItems: 1
+    maxItems: 2
+    description: >
+      Length based on parent's \#size-cells. Size in bytes of memory to
+      reserve.
+
+  alignment:
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    minItems: 1
+    maxItems: 2
+    description: >
+      Length based on parent's \#size-cells. Address boundary for
+      alignment of allocation.
+
+  alloc-ranges:
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    description: >
+      Address and Length pairs. Specifies regions of memory that are
+      acceptable to allocate from.
+
+  no-map:
+    type: boolean
+    description: >
+      Indicates the operating system must not create a virtual mapping
+      of the region as part of its standard mapping of system memory,
+      nor permit speculative access to it under any circumstances other
+      than under the control of the device driver using the region.
+
+  reusable:
+    type: boolean
+    description: >
+      The operating system can use the memory in this region with the
+      limitation that the device driver(s) owning the region need to be
+      able to reclaim it back. Typically that means that the operating
+      system can use that region to store volatile or cached data that
+      can be otherwise regenerated or migrated elsewhere.
+
+allOf:
+  - if:
+      required:
+        - no-map
+
+    then:
+      not:
+        required:
+          - reusable
+
+  - if:
+      required:
+        - reusable
+
+    then:
+      not:
+        required:
+          - no-map
+
+oneOf:
+  - required:
+      - reg
+
+  - required:
+      - size
+
+additionalProperties: true
+
+...