1 files changed, 0 insertions, 33 deletions
diff --git a/dts/Bindings/reset/snps,axs10x-reset.txt b/dts/Bindings/reset/snps,axs10x-reset.txt
deleted file mode 100644
index 32d8435a41..0000000000
--- a/dts/Bindings/reset/snps,axs10x-reset.txt
+++ /dev/null
@@ -1,33 +0,0 @@
-Binding for the AXS10x reset controller
-
-This binding describes the ARC AXS10x boards custom IP-block which allows
-to control reset signals of selected peripherals. For example DW GMAC, etc...
-This block is controlled via memory-mapped register (AKA CREG) which
-represents up-to 32 reset lines.
-
-As of today only the following lines are used:
- - DW GMAC - line 5
-
-This binding uses the common reset binding[1].
-
-[1] Documentation/devicetree/bindings/reset/reset.txt
-
-Required properties:
-- compatible: should be "snps,axs10x-reset".
-- reg: should always contain pair address - length: for creg reset
-  bits register.
-- #reset-cells: from common reset binding; Should always be set to 1.
-
-Example:
-	reset: reset-controller@11220 {
-		compatible = "snps,axs10x-reset";
-		#reset-cells = <1>;
-		reg = <0x11220 0x4>;
-	};
-
-Specifying reset lines connected to IP modules:
-	ethernet@.... {
-		....
-		resets = <&reset 5>;
-		....
-	};