1 files changed, 0 insertions, 27 deletions
diff --git a/dts/Bindings/serial/cdns,uart.txt b/dts/Bindings/serial/cdns,uart.txt
deleted file mode 100644
index 4efc560f90..0000000000
--- a/dts/Bindings/serial/cdns,uart.txt
+++ /dev/null
@@ -1,27 +0,0 @@
-Binding for Cadence UART Controller
-
-Required properties:
-- compatible :
-  Use "xlnx,xuartps","cdns,uart-r1p8" for Zynq-7xxx SoC.
-  Use "xlnx,zynqmp-uart","cdns,uart-r1p12" for Zynq Ultrascale+ MPSoC.
-- reg: Should contain UART controller registers location and length.
-- interrupts: Should contain UART controller interrupts.
-- clocks: Must contain phandles to the UART clocks
-  See ../clocks/clock-bindings.txt for details.
-- clock-names: Tuple to identify input clocks, must contain "uart_clk" and "pclk"
-  See ../clocks/clock-bindings.txt for details.
-
-
-Optional properties:
-- cts-override : Override the CTS modem status signal. This signal will
-  always be reported as active instead of being obtained from the modem status
-  register. Define this if your serial port does not use this pin
-
-Example:
-	uart@e0000000 {
-		compatible = "cdns,uart-r1p8";
-		clocks = <&clkc 23>, <&clkc 40>;
-		clock-names = "uart_clk", "pclk";
-		reg = <0xE0000000 0x1000>;
-		interrupts = <0 27 4>;
-	};