diff options
Diffstat (limited to 'dts/Bindings/soc/qcom')
| -rw-r--r-- | dts/Bindings/soc/qcom/qcom,aoss-qmp.yaml | 13 | ||||
| -rw-r--r-- | dts/Bindings/soc/qcom/qcom,apr-services.yaml | 53 | ||||
| -rw-r--r-- | dts/Bindings/soc/qcom/qcom,apr.yaml | 180 | ||||
| -rw-r--r-- | dts/Bindings/soc/qcom/qcom,dcc.yaml | 44 | ||||
| -rw-r--r-- | dts/Bindings/soc/qcom/qcom,eud.yaml | 8 | ||||
| -rw-r--r-- | dts/Bindings/soc/qcom/qcom,geni-se.yaml | 50 | ||||
| -rw-r--r-- | dts/Bindings/soc/qcom/qcom,glink.txt | 94 | ||||
| -rw-r--r-- | dts/Bindings/soc/qcom/qcom,msm8976-ramp-controller.yaml | 36 | ||||
| -rw-r--r-- | dts/Bindings/soc/qcom/qcom,pmic-glink.yaml | 116 | ||||
| -rw-r--r-- | dts/Bindings/soc/qcom/qcom,rpm-master-stats.yaml | 69 | ||||
| -rw-r--r-- | dts/Bindings/soc/qcom/qcom,rpm.yaml | 101 | ||||
| -rw-r--r-- | dts/Bindings/soc/qcom/qcom,rpmh-rsc.yaml | 43 | ||||
| -rw-r--r-- | dts/Bindings/soc/qcom/qcom,smd-rpm.yaml | 97 | ||||
| -rw-r--r-- | dts/Bindings/soc/qcom/qcom,smd.yaml | 86 | ||||
| -rw-r--r-- | dts/Bindings/soc/qcom/qcom,smem.yaml | 6 | ||||
| -rw-r--r-- | dts/Bindings/soc/qcom/qcom,smp2p.yaml | 2 | ||||
| -rw-r--r-- | dts/Bindings/soc/qcom/qcom,spm.yaml | 10 | ||||
| -rw-r--r-- | dts/Bindings/soc/qcom/qcom,wcnss.yaml | 11 | ||||
| -rw-r--r-- | dts/Bindings/soc/qcom/qcom-stats.yaml | 19 |
19 files changed, 724 insertions, 314 deletions
diff --git a/dts/Bindings/soc/qcom/qcom,aoss-qmp.yaml b/dts/Bindings/soc/qcom/qcom,aoss-qmp.yaml index e2e173dfad..b4478f417e 100644 --- a/dts/Bindings/soc/qcom/qcom,aoss-qmp.yaml +++ b/dts/Bindings/soc/qcom/qcom,aoss-qmp.yaml @@ -4,7 +4,7 @@ $id: http://devicetree.org/schemas/soc/qcom/qcom,aoss-qmp.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# -title: Qualcomm Always-On Subsystem side channel binding +title: Qualcomm Always-On Subsystem side channel maintainers: - Bjorn Andersson <bjorn.andersson@linaro.org> @@ -13,7 +13,7 @@ description: This binding describes the hardware component responsible for side channel requests to the always-on subsystem (AOSS), used for certain power management requests that is not handled by the standard RPMh interface. Each client in the - SoC has it's own block of message RAM and IRQ for communication with the AOSS. + SoC has its own block of message RAM and IRQ for communication with the AOSS. The protocol used to communicate in the message RAM is known as Qualcomm Messaging Protocol (QMP) @@ -25,14 +25,21 @@ properties: compatible: items: - enum: + - qcom,qdu1000-aoss-qmp + - qcom,sa8775p-aoss-qmp - qcom,sc7180-aoss-qmp - qcom,sc7280-aoss-qmp - qcom,sc8180x-aoss-qmp + - qcom,sc8280xp-aoss-qmp - qcom,sdm845-aoss-qmp - qcom,sm6350-aoss-qmp - qcom,sm8150-aoss-qmp - qcom,sm8250-aoss-qmp - qcom,sm8350-aoss-qmp + - qcom,sm8450-aoss-qmp + - qcom,sm8550-aoss-qmp + - qcom,sm8650-aoss-qmp + - qcom,x1e80100-aoss-qmp - const: qcom,aoss-qmp reg: @@ -72,7 +79,7 @@ patternProperties: description: The AOSS side channel also provides the controls for three cooling devices, these are expressed as subnodes of the QMP node. The name of the node is - used to identify the resource and must therefor be "cx", "mx" or "ebi". + used to identify the resource and must therefore be "cx", "mx" or "ebi". properties: "#cooling-cells": diff --git a/dts/Bindings/soc/qcom/qcom,apr-services.yaml b/dts/Bindings/soc/qcom/qcom,apr-services.yaml new file mode 100644 index 0000000000..bdf482db32 --- /dev/null +++ b/dts/Bindings/soc/qcom/qcom,apr-services.yaml @@ -0,0 +1,53 @@ +# SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/soc/qcom/qcom,apr-services.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm APR/GPR services shared parts + +maintainers: + - Srinivas Kandagatla <srinivas.kandagatla@linaro.org> + +description: + Common parts of a static service in Qualcomm APR/GPR (Asynchronous/Generic + Packet Router). + +properties: + reg: + minimum: 1 + maximum: 13 + description: | + APR Service ID + 3 = DSP Core Service + 4 = Audio Front End Service. + 5 = Voice Stream Manager Service. + 6 = Voice processing manager. + 7 = Audio Stream Manager Service. + 8 = Audio Device Manager Service. + 9 = Multimode voice manager. + 10 = Core voice stream. + 11 = Core voice processor. + 12 = Ultrasound stream manager. + 13 = Listen stream manager. + GPR Service ID + 1 = Audio Process Manager Service + 2 = Proxy Resource Manager Service. + 3 = AMDB Service. + 4 = Voice processing manager. + + qcom,protection-domain: + $ref: /schemas/types.yaml#/definitions/string-array + description: | + Protection domain service name and path for APR service (if supported). + Possible values are:: + "avs/audio", "msm/adsp/audio_pd". + "kernel/elf_loader", "msm/modem/wlan_pd". + "tms/servreg", "msm/adsp/audio_pd". + "tms/servreg", "msm/modem/wlan_pd". + "tms/servreg", "msm/slpi/sensor_pd". + +required: + - reg + +additionalProperties: true diff --git a/dts/Bindings/soc/qcom/qcom,apr.yaml b/dts/Bindings/soc/qcom/qcom,apr.yaml index 028c5d105a..e51acdcaaf 100644 --- a/dts/Bindings/soc/qcom/qcom,apr.yaml +++ b/dts/Bindings/soc/qcom/qcom,apr.yaml @@ -1,10 +1,10 @@ # SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) %YAML 1.2 --- -$id: "http://devicetree.org/schemas/soc/qcom/qcom,apr.yaml#" -$schema: "http://devicetree.org/meta-schemas/core.yaml#" +$id: http://devicetree.org/schemas/soc/qcom/qcom,apr.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# -title: Qualcomm APR/GPR (Asynchronous/Generic Packet Router) binding +title: Qualcomm APR/GPR (Asynchronous/Generic Packet Router) maintainers: - Srinivas Kandagatla <srinivas.kandagatla@linaro.org> @@ -17,9 +17,13 @@ description: | properties: compatible: enum: + - qcom,apr - qcom,apr-v2 - qcom,gpr + power-domains: + maxItems: 1 + qcom,apr-domain: $ref: /schemas/types.yaml#/definitions/uint32 enum: [1, 2, 3, 4, 5, 6, 7] @@ -52,18 +56,45 @@ properties: 2 = Audio DSP Domain 3 = Application Processor Domain + qcom,glink-channels: + $ref: /schemas/types.yaml#/definitions/string-array + description: Channel name used for the communication + maxItems: 1 + + qcom,intents: + $ref: /schemas/types.yaml#/definitions/uint32-matrix + minItems: 1 + maxItems: 32 + items: + items: + - description: size of each intent to preallocate + - description: amount of intents to preallocate + minimum: 1 + description: + List of (size, amount) pairs describing what intents should be + preallocated for this virtual channel. This can be used to tweak the + default intents available for the channel to meet expectations of the + remote. + + qcom,smd-channels: + $ref: /schemas/types.yaml#/definitions/string-array + description: Channel name used for the communication + items: + - const: apr_audio_svc + '#address-cells': const: 1 '#size-cells': const: 0 -#APR/GPR Services patternProperties: "^service@[1-9a-d]$": type: object + $ref: /schemas/soc/qcom/qcom,apr-services.yaml + additionalProperties: true description: - APR/GPR node's client devices use subnodes for desired static port services. + APR/GPR static port services. properties: compatible: @@ -75,56 +106,42 @@ patternProperties: - qcom,q6apm - qcom,q6prm - reg: - minimum: 1 - maximum: 13 - description: - APR Service ID - 3 = DSP Core Service - 4 = Audio Front End Service. - 5 = Voice Stream Manager Service. - 6 = Voice processing manager. - 7 = Audio Stream Manager Service. - 8 = Audio Device Manager Service. - 9 = Multimode voice manager. - 10 = Core voice stream. - 11 = Core voice processor. - 12 = Ultrasound stream manager. - 13 = Listen stream manager. - GPR Service ID - 1 = Audio Process Manager Service - 2 = Proxy Resource Manager Service. - 3 = AMDB Service. - 4 = Voice processing manager. - - qcom,protection-domain: - $ref: /schemas/types.yaml#/definitions/string-array - description: protection domain service name and path for apr service - possible values are - "avs/audio", "msm/adsp/audio_pd". - "kernel/elf_loader", "msm/modem/wlan_pd". - "tms/servreg", "msm/adsp/audio_pd". - "tms/servreg", "msm/modem/wlan_pd". - "tms/servreg", "msm/slpi/sensor_pd". - - '#address-cells': - const: 1 - - '#size-cells': - const: 0 - - patternProperties: - "^.*@[0-9a-f]+$": - type: object - description: - Service based devices like clock controllers or digital audio interfaces. - - additionalProperties: false - required: - compatible - qcom,domain +allOf: + - if: + properties: + compatible: + enum: + - qcom,gpr + then: + properties: + qcom,glink-channels: + items: + - const: adsp_apps + power-domains: false + else: + properties: + qcom,glink-channels: + items: + - const: apr_audio_svc + + - if: + required: + - qcom,glink-channels + then: + properties: + qcom,smd-channels: false + + - if: + required: + - qcom,smd-channels + then: + properties: + qcom,glink-channels: false + additionalProperties: false examples: @@ -133,31 +150,35 @@ examples: apr { compatible = "qcom,apr-v2"; qcom,domain = <APR_DOMAIN_ADSP>; + qcom,glink-channels = "apr_audio_svc"; + qcom,intents = <512 20>; #address-cells = <1>; #size-cells = <0>; q6core: service@3 { - compatible = "qcom,q6core"; - reg = <APR_SVC_ADSP_CORE>; - qcom,protection-domain = "avs/audio", "msm/adsp/audio_pd"; - }; - - q6afe: service@4 { - compatible = "qcom,q6afe"; - reg = <APR_SVC_AFE>; - qcom,protection-domain = "avs/audio", "msm/adsp/audio_pd"; - }; - - q6asm: service@7 { - compatible = "qcom,q6asm"; - reg = <APR_SVC_ASM>; - qcom,protection-domain = "avs/audio", "msm/adsp/audio_pd"; + compatible = "qcom,q6core"; + reg = <APR_SVC_ADSP_CORE>; + qcom,protection-domain = "avs/audio", "msm/adsp/audio_pd"; }; - q6adm: service@8 { - compatible = "qcom,q6adm"; - reg = <APR_SVC_ADM>; - qcom,protection-domain = "avs/audio", "msm/adsp/audio_pd"; + service@4 { + compatible = "qcom,q6afe"; + reg = <APR_SVC_AFE>; + qcom,protection-domain = "avs/audio", "msm/adsp/audio_pd"; + + clock-controller { + compatible = "qcom,q6afe-clocks"; + #clock-cells = <2>; + }; + + dais { + compatible = "qcom,q6afe-dais"; + #address-cells = <1>; + #size-cells = <0>; + #sound-dai-cells = <1>; + /* ... */ + }; + /* ... */ }; }; @@ -166,12 +187,25 @@ examples: gpr { compatible = "qcom,gpr"; qcom,domain = <GPR_DOMAIN_ID_ADSP>; + qcom,glink-channels = "adsp_apps"; + qcom,intents = <512 20>; #address-cells = <1>; #size-cells = <0>; service@1 { - compatible = "qcom,q6apm"; - reg = <GPR_APM_MODULE_IID>; - qcom,protection-domain = "avs/audio", "msm/adsp/audio_pd"; + compatible = "qcom,q6apm"; + reg = <GPR_APM_MODULE_IID>; + #sound-dai-cells = <0>; + qcom,protection-domain = "avs/audio", "msm/adsp/audio_pd"; + + dais { + compatible = "qcom,q6apm-dais"; + iommus = <&apps_smmu 0x1801 0x0>; + }; + + bedais { + compatible = "qcom,q6apm-lpass-dais"; + #sound-dai-cells = <1>; + }; }; }; diff --git a/dts/Bindings/soc/qcom/qcom,dcc.yaml b/dts/Bindings/soc/qcom/qcom,dcc.yaml new file mode 100644 index 0000000000..ce7e20dd22 --- /dev/null +++ b/dts/Bindings/soc/qcom/qcom,dcc.yaml @@ -0,0 +1,44 @@ +# SPDX-License-Identifier: (GPL-2.0-or-later OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/soc/qcom/qcom,dcc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Data Capture and Compare + +maintainers: + - Souradeep Chowdhury <quic_schowdhu@quicinc.com> + +description: | + DCC (Data Capture and Compare) is a DMA engine which is used to save + configuration data or system memory contents during catastrophic failure + or SW trigger. DCC is used to capture and store data for debugging purpose + +properties: + compatible: + items: + - enum: + - qcom,sm8150-dcc + - qcom,sc7280-dcc + - qcom,sc7180-dcc + - qcom,sdm845-dcc + - const: qcom,dcc + + reg: + items: + - description: DCC base + - description: DCC RAM base + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + dma@10a2000{ + compatible = "qcom,sm8150-dcc", "qcom,dcc"; + reg = <0x010a2000 0x1000>, + <0x010ad000 0x2000>; + }; diff --git a/dts/Bindings/soc/qcom/qcom,eud.yaml b/dts/Bindings/soc/qcom/qcom,eud.yaml index c98aab209b..f2c5ec7e64 100644 --- a/dts/Bindings/soc/qcom/qcom,eud.yaml +++ b/dts/Bindings/soc/qcom/qcom,eud.yaml @@ -1,8 +1,8 @@ # SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) %YAML 1.2 --- -$id: "http://devicetree.org/schemas/soc/qcom/qcom,eud.yaml#" -$schema: "http://devicetree.org/meta-schemas/core.yaml#" +$id: http://devicetree.org/schemas/soc/qcom/qcom,eud.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# title: Qualcomm Embedded USB Debugger @@ -55,9 +55,10 @@ additionalProperties: false examples: - | eud@88e0000 { - compatible = "qcom,sc7280-eud","qcom,eud"; + compatible = "qcom,sc7280-eud", "qcom,eud"; reg = <0x88e0000 0x2000>, <0x88e2000 0x1000>; + ports { #address-cells = <1>; #size-cells = <0>; @@ -67,6 +68,7 @@ examples: remote-endpoint = <&usb2_role_switch>; }; }; + port@1 { reg = <1>; eud_con: endpoint { diff --git a/dts/Bindings/soc/qcom/qcom,geni-se.yaml b/dts/Bindings/soc/qcom/qcom,geni-se.yaml index 2bf5293fc9..7b031ef096 100644 --- a/dts/Bindings/soc/qcom/qcom,geni-se.yaml +++ b/dts/Bindings/soc/qcom/qcom,geni-se.yaml @@ -1,8 +1,8 @@ # SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) %YAML 1.2 --- -$id: "http://devicetree.org/schemas/soc/qcom/qcom,geni-se.yaml#" -$schema: "http://devicetree.org/meta-schemas/core.yaml#" +$id: http://devicetree.org/schemas/soc/qcom/qcom,geni-se.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# title: GENI Serial Engine QUP Wrapper Controller @@ -21,20 +21,19 @@ properties: compatible: enum: - qcom,geni-se-qup + - qcom,geni-se-i2c-master-hub reg: description: QUP wrapper common register address and length. maxItems: 1 clock-names: - items: - - const: m-ahb - - const: s-ahb + minItems: 1 + maxItems: 2 clocks: - items: - - description: Master AHB Clock - - description: Slave AHB Clock + minItems: 1 + maxItems: 2 "#address-cells": const: 2 @@ -53,6 +52,8 @@ properties: iommus: maxItems: 1 + dma-coherent: true + required: - compatible - reg @@ -81,6 +82,39 @@ patternProperties: description: GENI Serial Engine based UART Controller. $ref: /schemas/serial/qcom,serial-geni-qcom.yaml# +allOf: + - if: + properties: + compatible: + contains: + const: qcom,geni-se-i2c-master-hub + then: + properties: + clock-names: + items: + - const: s-ahb + + clocks: + items: + - description: Slave AHB Clock + + iommus: false + + patternProperties: + "spi@[0-9a-f]+$": false + "serial@[0-9a-f]+$": false + else: + properties: + clock-names: + items: + - const: m-ahb + - const: s-ahb + + clocks: + items: + - description: Master AHB Clock + - description: Slave AHB Clock + additionalProperties: false examples: diff --git a/dts/Bindings/soc/qcom/qcom,glink.txt b/dts/Bindings/soc/qcom/qcom,glink.txt deleted file mode 100644 index 1214192847..0000000000 --- a/dts/Bindings/soc/qcom/qcom,glink.txt +++ /dev/null @@ -1,94 +0,0 @@ -Qualcomm GLINK edge binding - -This binding describes a Qualcomm GLINK edge, a fifo based mechanism for -communication between subsystem-pairs on various Qualcomm platforms. Two types -of edges can be described by the binding; the GLINK RPM edge and a SMEM based -edge. - -- compatible: - Usage: required for glink-rpm - Value type: <stringlist> - Definition: must be "qcom,glink-rpm" - -- label: - Usage: optional - Value type: <string> - Definition: should specify the subsystem name this edge corresponds to. - -- interrupts: - Usage: required - Value type: <prop-encoded-array> - Definition: should specify the IRQ used by the remote processor to - signal this processor about communication related events - -- qcom,remote-pid: - Usage: required for glink-smem - Value type: <u32> - Definition: specifies the identifier of the remote endpoint of this edge - -- qcom,rpm-msg-ram: - Usage: required for glink-rpm - Value type: <prop-encoded-array> - Definition: handle to RPM message memory resource - -- mboxes: - Usage: required - Value type: <prop-encoded-array> - Definition: reference to the "rpm_hlos" mailbox in APCS, as described - in mailbox/mailbox.txt - -= GLINK DEVICES -Each subnode of the GLINK node represent function tied to a virtual -communication channel. The name of the nodes are not important. The properties -of these nodes are defined by the individual bindings for the specific function -- but must contain the following property: - -- qcom,glink-channels: - Usage: required - Value type: <stringlist> - Definition: a list of channels tied to this function, used for matching - the function to a set of virtual channels - -- qcom,intents: - Usage: optional - Value type: <prop-encoded-array> - Definition: a list of size,amount pairs describing what intents should - be preallocated for this virtual channel. This can be used - to tweak the default intents available for the channel to - meet expectations of the remote. - -= EXAMPLE -The following example represents the GLINK RPM node on a MSM8996 device, with -the function for the "rpm_request" channel defined, which is used for -regulators and root clocks. - - apcs_glb: mailbox@9820000 { - compatible = "qcom,msm8996-apcs-hmss-global"; - reg = <0x9820000 0x1000>; - - #mbox-cells = <1>; - }; - - rpm_msg_ram: memory@68000 { - compatible = "qcom,rpm-msg-ram"; - reg = <0x68000 0x6000>; - }; - - rpm-glink { - compatible = "qcom,glink-rpm"; - - interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>; - - qcom,rpm-msg-ram = <&rpm_msg_ram>; - - mboxes = <&apcs_glb 0>; - - rpm-requests { - compatible = "qcom,rpm-msm8996"; - qcom,glink-channels = "rpm_requests"; - - qcom,intents = <0x400 5 - 0x800 1>; - ... - }; - }; diff --git a/dts/Bindings/soc/qcom/qcom,msm8976-ramp-controller.yaml b/dts/Bindings/soc/qcom/qcom,msm8976-ramp-controller.yaml new file mode 100644 index 0000000000..aae9cf7b8c --- /dev/null +++ b/dts/Bindings/soc/qcom/qcom,msm8976-ramp-controller.yaml @@ -0,0 +1,36 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/soc/qcom/qcom,msm8976-ramp-controller.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Ramp Controller + +maintainers: + - AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> + +description: + The Ramp Controller is used to program the sequence ID for pulse + swallowing, enable sequences and link Sequence IDs (SIDs) for the + CPU cores on some Qualcomm SoCs. + +properties: + compatible: + enum: + - qcom,msm8976-ramp-controller + + reg: + maxItems: 1 + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + cpu-power-controller@b014000 { + compatible = "qcom,msm8976-ramp-controller"; + reg = <0x0b014000 0x68>; + }; diff --git a/dts/Bindings/soc/qcom/qcom,pmic-glink.yaml b/dts/Bindings/soc/qcom/qcom,pmic-glink.yaml new file mode 100644 index 0000000000..61df97ffe1 --- /dev/null +++ b/dts/Bindings/soc/qcom/qcom,pmic-glink.yaml @@ -0,0 +1,116 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/soc/qcom/qcom,pmic-glink.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm PMIC GLINK firmware interface for battery management, USB + Type-C and other things. + +maintainers: + - Bjorn Andersson <andersson@kernel.org> + +description: + The PMIC GLINK service, running on a coprocessor on some modern Qualcomm + platforms and implement USB Type-C handling and battery management. This + binding describes the component in the OS used to communicate with the + firmware and connect it's resources to those described in the Devicetree, + particularly the USB Type-C controllers relationship with USB and DisplayPort + components. + +properties: + compatible: + oneOf: + - items: + - enum: + - qcom,sc8180x-pmic-glink + - qcom,sc8280xp-pmic-glink + - qcom,sm8350-pmic-glink + - qcom,sm8450-pmic-glink + - qcom,sm8550-pmic-glink + - const: qcom,pmic-glink + - items: + - enum: + - qcom,sm8650-pmic-glink + - const: qcom,sm8550-pmic-glink + - const: qcom,pmic-glink + + '#address-cells': + const: 1 + + '#size-cells': + const: 0 + + orientation-gpios: + description: Array of input gpios for the Type-C connector orientation indication. + The GPIO indication is used to detect the orientation of the Type-C connector. + The array should contain a gpio entry for each PMIC Glink connector, in reg order. + It is defined that GPIO active level means "CC2" or Reversed/Flipped orientation. + +patternProperties: + '^connector@\d$': + $ref: /schemas/connector/usb-connector.yaml# + required: + - reg + +required: + - compatible + +allOf: + - if: + not: + properties: + compatible: + contains: + enum: + - qcom,sm8450-pmic-glink + - qcom,sm8550-pmic-glink + then: + properties: + orientation-gpios: false + +additionalProperties: false + +examples: + - |+ + pmic-glink { + compatible = "qcom,sc8280xp-pmic-glink", "qcom,pmic-glink"; + + #address-cells = <1>; + #size-cells = <0>; + + connector@0 { + compatible = "usb-c-connector"; + reg = <0>; + power-role = "dual"; + data-role = "dual"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + endpoint { + remote-endpoint = <&usb_role>; + }; + }; + + port@1 { + reg = <1>; + endpoint { + remote-endpoint = <&ss_phy_out>; + }; + }; + + port@2 { + reg = <2>; + endpoint { + remote-endpoint = <&sbu_mux>; + }; + }; + }; + }; + }; +... + diff --git a/dts/Bindings/soc/qcom/qcom,rpm-master-stats.yaml b/dts/Bindings/soc/qcom/qcom,rpm-master-stats.yaml new file mode 100644 index 0000000000..031800985b --- /dev/null +++ b/dts/Bindings/soc/qcom/qcom,rpm-master-stats.yaml @@ -0,0 +1,69 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/soc/qcom/qcom,rpm-master-stats.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Technologies, Inc. (QTI) RPM Master Stats + +maintainers: + - Konrad Dybcio <konrad.dybcio@linaro.org> + +description: | + The Qualcomm RPM (Resource Power Manager) architecture includes a concept + of "RPM Masters". They can be thought of as "the local gang leaders", usually + spanning a single subsystem (e.g. APSS, ADSP, CDSP). All of the RPM decisions + (particularly around entering hardware-driven low power modes: XO shutdown + and total system-wide power collapse) are first made at Master-level, and + only then aggregated for the entire system. + + The Master Stats provide a few useful bits that can be used to assess whether + our device has entered the desired low-power mode, how long it took to do so, + the duration of that residence, how long it took to come back online, + how many times a given sleep state was entered and which cores are actively + voting for staying awake. + + This scheme has been used on various SoCs in the 2013-2023 era, with some + newer or higher-end designs providing this information through an SMEM query. + +properties: + compatible: + const: qcom,rpm-master-stats + + qcom,rpm-msg-ram: + $ref: /schemas/types.yaml#/definitions/phandle-array + description: Phandle to an RPM MSG RAM slice containing the master stats + minItems: 1 + maxItems: 5 + + qcom,master-names: + $ref: /schemas/types.yaml#/definitions/string-array + description: + The name of the RPM Master which owns the MSG RAM slice where this + instance of Master Stats resides + minItems: 1 + maxItems: 5 + +required: + - compatible + - qcom,rpm-msg-ram + - qcom,master-names + +additionalProperties: false + +examples: + - | + stats { + compatible = "qcom,rpm-master-stats"; + qcom,rpm-msg-ram = <&apss_master_stats>, + <&mpss_master_stats>, + <&adsp_master_stats>, + <&cdsp_master_stats>, + <&tz_master_stats>; + qcom,master-names = "APSS", + "MPSS", + "ADSP", + "CDSP", + "TZ"; + }; +... diff --git a/dts/Bindings/soc/qcom/qcom,rpm.yaml b/dts/Bindings/soc/qcom/qcom,rpm.yaml new file mode 100644 index 0000000000..b00be9e012 --- /dev/null +++ b/dts/Bindings/soc/qcom/qcom,rpm.yaml @@ -0,0 +1,101 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/soc/qcom/qcom,rpm.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Resource Power Manager (RPM) + +description: + This driver is used to interface with the Resource Power Manager (RPM) found + in various Qualcomm platforms. The RPM allows each component in the system + to vote for state of the system resources, such as clocks, regulators and bus + frequencies. + +maintainers: + - Bjorn Andersson <andersson@kernel.org> + +properties: + compatible: + enum: + - qcom,rpm-apq8064 + - qcom,rpm-msm8660 + - qcom,rpm-msm8960 + - qcom,rpm-ipq8064 + - qcom,rpm-mdm9615 + + reg: + maxItems: 1 + + interrupts: + maxItems: 3 + + interrupt-names: + items: + - const: ack + - const: err + - const: wakeup + + qcom,ipc: + $ref: /schemas/types.yaml#/definitions/phandle-array + items: + - items: + - description: phandle to a syscon node representing the APCS registers + - description: u32 representing offset to the register within the syscon + - description: u32 representing the ipc bit within the register + description: + Three entries specifying the outgoing ipc bit used for signaling the RPM. + +patternProperties: + "^regulators(-[01])?$": + type: object + $ref: /schemas/regulator/qcom,rpm-regulator.yaml# + unevaluatedProperties: false + +required: + - compatible + - reg + - interrupts + - interrupt-names + - qcom,ipc + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/interrupt-controller/irq.h> + #include <dt-bindings/mfd/qcom-rpm.h> + + rpm@108000 { + compatible = "qcom,rpm-msm8960"; + reg = <0x108000 0x1000>; + qcom,ipc = <&apcs 0x8 2>; + + interrupts = <GIC_SPI 19 IRQ_TYPE_NONE>, <GIC_SPI 21 IRQ_TYPE_NONE>, <GIC_SPI 22 IRQ_TYPE_NONE>; + interrupt-names = "ack", "err", "wakeup"; + + regulators { + compatible = "qcom,rpm-pm8921-regulators"; + vdd_l1_l2_l12_l18-supply = <&pm8921_s4>; + + s1 { + regulator-min-microvolt = <1225000>; + regulator-max-microvolt = <1225000>; + + bias-pull-down; + + qcom,switch-mode-frequency = <3200000>; + }; + + pm8921_s4: s4 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + qcom,switch-mode-frequency = <1600000>; + bias-pull-down; + + qcom,force-mode = <QCOM_RPM_FORCE_MODE_AUTO>; + }; + }; + }; diff --git a/dts/Bindings/soc/qcom/qcom,rpmh-rsc.yaml b/dts/Bindings/soc/qcom/qcom,rpmh-rsc.yaml index f5ecf4a8c3..af632d0e03 100644 --- a/dts/Bindings/soc/qcom/qcom,rpmh-rsc.yaml +++ b/dts/Bindings/soc/qcom/qcom,rpmh-rsc.yaml @@ -65,33 +65,22 @@ properties: qcom,tcs-config: $ref: /schemas/types.yaml#/definitions/uint32-matrix + minItems: 4 + maxItems: 4 items: - - items: - - description: TCS type - enum: [ 0, 1, 2, 3 ] - - description: Number of TCS - - items: - - description: TCS type - enum: [ 0, 1, 2, 3 ] - - description: Number of TCS - - items: - - description: TCS type - enum: [ 0, 1, 2, 3] - - description: Numbe r of TCS - - items: - - description: TCS type - enum: [ 0, 1, 2, 3 ] - - description: Number of TCS + items: + - description: | + TCS type:: + - ACTIVE_TCS + - SLEEP_TCS + - WAKE_TCS + - CONTROL_TCS + enum: [ 0, 1, 2, 3 ] + - description: Number of TCS description: | The tuple defining the configuration of TCS. Must have two cells which describe each TCS type. The order of the TCS must match the hardware configuration. - Cell 1 (TCS Type):: TCS types to be specified:: - - ACTIVE_TCS - - SLEEP_TCS - - WAKE_TCS - - CONTROL_TCS - Cell 2 (Number of TCS):: <u32> qcom,tcs-offset: $ref: /schemas/types.yaml#/definitions/uint32 @@ -110,6 +99,9 @@ properties: - const: drv-2 - const: drv-3 + power-domains: + maxItems: 1 + bcm-voter: $ref: /schemas/interconnect/qcom,bcm-voter.yaml# @@ -120,8 +112,9 @@ properties: $ref: /schemas/power/qcom,rpmpd.yaml# patternProperties: - '-regulators$': + '^regulators(-[0-9])?$': $ref: /schemas/regulator/qcom,rpmh-regulator.yaml# + unevaluatedProperties: false required: - compatible @@ -131,6 +124,7 @@ required: - qcom,tcs-offset - reg - reg-names + - power-domains additionalProperties: false @@ -162,6 +156,7 @@ examples: <SLEEP_TCS 3>, <WAKE_TCS 3>, <CONTROL_TCS 1>; + power-domains = <&CLUSTER_PD>; }; - | @@ -185,6 +180,7 @@ examples: <SLEEP_TCS 1>, <WAKE_TCS 1>, <CONTROL_TCS 0>; + power-domains = <&CLUSTER_PD>; }; - | @@ -208,6 +204,7 @@ examples: <SLEEP_TCS 3>, <WAKE_TCS 3>, <CONTROL_TCS 0>; + power-domains = <&CLUSTER_PD>; clock-controller { compatible = "qcom,sm8350-rpmh-clk"; diff --git a/dts/Bindings/soc/qcom/qcom,smd-rpm.yaml b/dts/Bindings/soc/qcom/qcom,smd-rpm.yaml index f0f1bf06ae..2fa725b8af 100644 --- a/dts/Bindings/soc/qcom/qcom,smd-rpm.yaml +++ b/dts/Bindings/soc/qcom/qcom,smd-rpm.yaml @@ -1,10 +1,10 @@ # SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) %YAML 1.2 --- -$id: "http://devicetree.org/schemas/soc/qcom/qcom,smd-rpm.yaml#" -$schema: "http://devicetree.org/meta-schemas/core.yaml#" +$id: http://devicetree.org/schemas/soc/qcom/qcom,smd-rpm.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# -title: Qualcomm Resource Power Manager (RPM) over SMD +title: Qualcomm Resource Power Manager (RPM) over SMD/GLINK description: | This driver is used to interface with the Resource Power Manager (RPM) found @@ -12,9 +12,9 @@ description: | to vote for state of the system resources, such as clocks, regulators and bus frequencies. - The SMD information for the RPM edge should be filled out. See qcom,smd.yaml - for the required edge properties. All SMD related properties will reside - within the RPM node itself. + The SMD or GLINK information for the RPM edge should be filled out. See + qcom,smd.yaml for the required edge properties. All SMD/GLINK related + properties will reside within the RPM node itself. The RPM exposes resources to its subnodes. The rpm_requests node must be present and this subnode may contain children that designate regulator @@ -33,42 +33,82 @@ properties: enum: - qcom,rpm-apq8084 - qcom,rpm-ipq6018 + - qcom,rpm-ipq9574 + - qcom,rpm-mdm9607 - qcom,rpm-msm8226 + - qcom,rpm-msm8610 + - qcom,rpm-msm8909 - qcom,rpm-msm8916 + - qcom,rpm-msm8917 - qcom,rpm-msm8936 + - qcom,rpm-msm8937 + - qcom,rpm-msm8952 - qcom,rpm-msm8953 - qcom,rpm-msm8974 - qcom,rpm-msm8976 + - qcom,rpm-msm8994 - qcom,rpm-msm8996 - qcom,rpm-msm8998 + - qcom,rpm-qcm2290 + - qcom,rpm-qcs404 - qcom,rpm-sdm660 - qcom,rpm-sm6115 - qcom,rpm-sm6125 - - qcom,rpm-qcm2290 - - qcom,rpm-qcs404 + - qcom,rpm-sm6375 clock-controller: $ref: /schemas/clock/qcom,rpmcc.yaml# unevaluatedProperties: false + power-controller: + $ref: /schemas/power/qcom,rpmpd.yaml# + + qcom,glink-channels: + $ref: /schemas/types.yaml#/definitions/string-array + description: Channel name used for the RPM communication + items: + - const: rpm_requests + qcom,smd-channels: $ref: /schemas/types.yaml#/definitions/string-array description: Channel name used for the RPM communication items: - const: rpm_requests +patternProperties: + "^regulators(-[01])?$": + $ref: /schemas/regulator/qcom,smd-rpm-regulator.yaml# + unevaluatedProperties: false + if: properties: compatible: contains: enum: - qcom,rpm-apq8084 + - qcom,rpm-mdm9607 + - qcom,rpm-msm8226 + - qcom,rpm-msm8610 + - qcom,rpm-msm8909 - qcom,rpm-msm8916 - - qcom,rpm-msm8974 + - qcom,rpm-msm8917 + - qcom,rpm-msm8936 + - qcom,rpm-msm8937 + - qcom,rpm-msm8952 - qcom,rpm-msm8953 + - qcom,rpm-msm8974 + - qcom,rpm-msm8976 + - qcom,rpm-msm8994 then: + properties: + qcom,glink-channels: false required: - qcom,smd-channels +else: + properties: + qcom,smd-channels: false + required: + - qcom,glink-channels required: - compatible @@ -80,20 +120,41 @@ examples: #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/interrupt-controller/irq.h> - smd { - compatible = "qcom,smd"; + remoteproc { + compatible = "qcom,msm8916-rpm-proc", "qcom,rpm-proc"; - rpm { + smd-edge { interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>; qcom,ipc = <&apcs 8 0>; qcom,smd-edge = <15>; - rpm-requests { - compatible = "qcom,rpm-msm8974"; - qcom,smd-channels = "rpm_requests"; + rpm-requests { + compatible = "qcom,rpm-msm8916"; + qcom,smd-channels = "rpm_requests"; + + clock-controller { + compatible = "qcom,rpmcc-msm8916", "qcom,rpmcc"; + #clock-cells = <1>; + clocks = <&xo_board>; + clock-names = "xo"; + }; - /* Regulator nodes to follow */ + power-controller { + compatible = "qcom,msm8916-rpmpd"; + #power-domain-cells = <1>; + operating-points-v2 = <&rpmpd_opp_table>; + + rpmpd_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-1 { + opp-level = <1>; + }; + opp-2 { + opp-level = <2>; + }; + }; }; }; - }; -... + }; + }; diff --git a/dts/Bindings/soc/qcom/qcom,smd.yaml b/dts/Bindings/soc/qcom/qcom,smd.yaml index bca07bb13e..4819ce90d2 100644 --- a/dts/Bindings/soc/qcom/qcom,smd.yaml +++ b/dts/Bindings/soc/qcom/qcom,smd.yaml @@ -15,92 +15,25 @@ description: The Qualcomm Shared Memory Driver is a FIFO based communication channel for sending data between the various subsystems in Qualcomm platforms. + Using the top-level SMD node is deprecated. Instead, the SMD edges are defined + directly below the device node representing the respective remote subsystem + or remote processor. + +deprecated: true + properties: compatible: const: qcom,smd patternProperties: - "^.*-edge|rpm$": - type: object + "^smd-edge|rpm$": + $ref: /schemas/remoteproc/qcom,smd-edge.yaml# + unevaluatedProperties: false description: Each subnode of the SMD node represents a remote subsystem or a remote processor of some sort - or in SMD language an "edge". The name of the edges are not important. - properties: - interrupts: - maxItems: 1 - - label: - $ref: /schemas/types.yaml#/definitions/string - description: - Name of the edge, used for debugging and identification purposes. The - node name will be used if this is not present. - - mboxes: - maxItems: 1 - description: - Reference to the mailbox representing the outgoing doorbell in APCS for - this client. - - qcom,ipc: - $ref: /schemas/types.yaml#/definitions/phandle-array - items: - - items: - - description: phandle to a syscon node representing the APCS registers - - description: u32 representing offset to the register within the syscon - - description: u32 representing the ipc bit within the register - description: - Three entries specifying the outgoing ipc bit used for signaling the - remote processor. - - qcom,smd-edge: - $ref: /schemas/types.yaml#/definitions/uint32 - description: - The identifier of the remote processor in the smd channel allocation - table. - - qcom,remote-pid: - $ref: /schemas/types.yaml#/definitions/uint32 - description: - The identifier for the remote processor as known by the rest of the - system. - - rpm-requests: - type: object - description: - In turn, subnodes of the "edges" represent devices tied to SMD - channels on that "edge". The names of the devices are not - important. The properties of these nodes are defined by the - individual bindings for the SMD devices. - - properties: - qcom,smd-channels: - $ref: /schemas/types.yaml#/definitions/string-array - minItems: 1 - maxItems: 32 - description: - A list of channels tied to this device, used for matching the - device to channels. - - required: - - compatible - - qcom,smd-channels - - additionalProperties: true - - required: - - interrupts - - qcom,smd-edge - - oneOf: - - required: - - mboxes - - required: - - qcom,ipc - - additionalProperties: false - required: - compatible @@ -110,6 +43,7 @@ examples: # The following example represents a smd node, with one edge representing the # "rpm" subsystem. For the "rpm" subsystem we have a device tied to the # "rpm_request" channel. + # NOTE: This is deprecated, represent the RPM using "qcom,rpm-proc" instead. - | #include <dt-bindings/interrupt-controller/arm-gic.h> diff --git a/dts/Bindings/soc/qcom/qcom,smem.yaml b/dts/Bindings/soc/qcom/qcom,smem.yaml index 4149cf2b66..bc7815d985 100644 --- a/dts/Bindings/soc/qcom/qcom,smem.yaml +++ b/dts/Bindings/soc/qcom/qcom,smem.yaml @@ -1,10 +1,10 @@ # SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) %YAML 1.2 --- -$id: "http://devicetree.org/schemas/soc/qcom/qcom,smem.yaml#" -$schema: "http://devicetree.org/meta-schemas/core.yaml#" +$id: http://devicetree.org/schemas/soc/qcom/qcom,smem.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# -title: Qualcomm Shared Memory Manager binding +title: Qualcomm Shared Memory Manager maintainers: - Andy Gross <agross@kernel.org> diff --git a/dts/Bindings/soc/qcom/qcom,smp2p.yaml b/dts/Bindings/soc/qcom/qcom,smp2p.yaml index 795bd8cd41..58500529b9 100644 --- a/dts/Bindings/soc/qcom/qcom,smp2p.yaml +++ b/dts/Bindings/soc/qcom/qcom,smp2p.yaml @@ -60,7 +60,7 @@ properties: Two identifiers of the inbound and outbound smem items used for this edge. patternProperties: - "^master-kernel|slave-kernel|ipa-ap-to-modem|ipa-modem-to-ap$": + "^master-kernel|slave-kernel|ipa-ap-to-modem|ipa-modem-to-ap|wlan-ap-to-wpss|wlan-wpss-to-ap$": type: object description: Each SMP2P pair contain a set of inbound and outbound entries, these are diff --git a/dts/Bindings/soc/qcom/qcom,spm.yaml b/dts/Bindings/soc/qcom/qcom,spm.yaml index 07d2d53983..20c8cd38ff 100644 --- a/dts/Bindings/soc/qcom/qcom,spm.yaml +++ b/dts/Bindings/soc/qcom/qcom,spm.yaml @@ -1,10 +1,10 @@ # SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) %YAML 1.2 --- -$id: "http://devicetree.org/schemas/soc/qcom/qcom,spm.yaml#" -$schema: "http://devicetree.org/meta-schemas/core.yaml#" +$id: http://devicetree.org/schemas/soc/qcom/qcom,spm.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# -title: Qualcomm Subsystem Power Manager binding +title: Qualcomm Subsystem Power Manager maintainers: - Andy Gross <agross@kernel.org> @@ -22,9 +22,13 @@ properties: - qcom,sdm660-silver-saw2-v4.1-l2 - qcom,msm8998-gold-saw2-v4.1-l2 - qcom,msm8998-silver-saw2-v4.1-l2 + - qcom,msm8909-saw2-v3.0-cpu - qcom,msm8916-saw2-v3.0-cpu + - qcom,msm8939-saw2-v3.0-cpu - qcom,msm8226-saw2-v2.1-cpu - qcom,msm8974-saw2-v2.1-cpu + - qcom,msm8976-gold-saw2-v2.3-l2 + - qcom,msm8976-silver-saw2-v2.3-l2 - qcom,apq8084-saw2-v2.1-cpu - qcom,apq8064-saw2-v1.1-cpu - const: qcom,saw2 diff --git a/dts/Bindings/soc/qcom/qcom,wcnss.yaml b/dts/Bindings/soc/qcom/qcom,wcnss.yaml index d891ecfb26..74bb92e315 100644 --- a/dts/Bindings/soc/qcom/qcom,wcnss.yaml +++ b/dts/Bindings/soc/qcom/qcom,wcnss.yaml @@ -20,7 +20,7 @@ properties: firmware-name: $ref: /schemas/types.yaml#/definitions/string - default: "wlan/prima/WCNSS_qcom_wlan_nv.bin" + default: wlan/prima/WCNSS_qcom_wlan_nv.bin description: Relative firmware image path for the WLAN NV blob. @@ -42,15 +42,13 @@ properties: bluetooth: type: object additionalProperties: false + allOf: + - $ref: /schemas/net/bluetooth/bluetooth-controller.yaml# properties: compatible: const: qcom,wcnss-bt - local-bd-address: - $ref: /schemas/types.yaml#/definitions/uint8-array - maxItems: 6 - description: - See Documentation/devicetree/bindings/net/bluetooth.txt + local-bd-address: true required: - compatible @@ -77,7 +75,6 @@ properties: Should reference the tx-enable and tx-rings-empty SMEM states. qcom,smem-state-names: - $ref: /schemas/types.yaml#/definitions/string-array items: - const: tx-enable - const: tx-rings-empty diff --git a/dts/Bindings/soc/qcom/qcom-stats.yaml b/dts/Bindings/soc/qcom/qcom-stats.yaml index 473adca4e9..686a7ef2f4 100644 --- a/dts/Bindings/soc/qcom/qcom-stats.yaml +++ b/dts/Bindings/soc/qcom/qcom-stats.yaml @@ -4,10 +4,10 @@ $id: http://devicetree.org/schemas/soc/qcom/qcom-stats.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# -title: Qualcomm Technologies, Inc. (QTI) Stats bindings +title: Qualcomm Technologies, Inc. (QTI) Stats maintainers: - - Maulik Shah <mkshah@codeaurora.org> + - Maulik Shah <quic_mkshah@quicinc.com> description: Always On Processor/Resource Power Manager maintains statistics of the SoC @@ -20,6 +20,7 @@ properties: compatible: enum: - qcom,rpmh-stats + - qcom,sdm845-rpmh-stats - qcom,rpm-stats # For older RPM firmware versions with fixed offset for the sleep stats - qcom,apq8084-rpm-stats @@ -30,10 +31,24 @@ properties: reg: maxItems: 1 + qcom,qmp: + $ref: /schemas/types.yaml#/definitions/phandle + description: Reference to the AOSS side-channel message RAM + required: - compatible - reg +allOf: + - if: + not: + properties: + compatible: + const: qcom,rpmh-stats + then: + properties: + qcom,qmp: false + additionalProperties: false examples: |