diff options
Diffstat (limited to 'dts/Bindings/soc')
-rw-r--r-- | dts/Bindings/soc/mediatek/pwrap.txt | 1 | ||||
-rw-r--r-- | dts/Bindings/soc/microchip/microchip,polarfire-soc-sys-controller.yaml | 35 | ||||
-rw-r--r-- | dts/Bindings/soc/qcom/qcom,geni-se.yaml | 1 | ||||
-rw-r--r-- | dts/Bindings/soc/qcom/qcom,smd-rpm.yaml | 2 | ||||
-rw-r--r-- | dts/Bindings/soc/rockchip/grf.txt | 61 | ||||
-rw-r--r-- | dts/Bindings/soc/rockchip/grf.yaml | 261 | ||||
-rw-r--r-- | dts/Bindings/soc/rockchip/power_domain.txt | 136 | ||||
-rw-r--r-- | dts/Bindings/soc/ti/sci-pm-domain.txt | 65 | ||||
-rw-r--r-- | dts/Bindings/soc/ti/sci-pm-domain.yaml | 59 | ||||
-rw-r--r-- | dts/Bindings/soc/ti/ti,pruss.yaml | 2 |
10 files changed, 358 insertions, 265 deletions
diff --git a/dts/Bindings/soc/mediatek/pwrap.txt b/dts/Bindings/soc/mediatek/pwrap.txt index 8051c17e64..d74a7a5ae9 100644 --- a/dts/Bindings/soc/mediatek/pwrap.txt +++ b/dts/Bindings/soc/mediatek/pwrap.txt @@ -27,6 +27,7 @@ Required properties in pwrap device node. "mediatek,mt8135-pwrap" for MT8135 SoCs "mediatek,mt8173-pwrap" for MT8173 SoCs "mediatek,mt8183-pwrap" for MT8183 SoCs + "mediatek,mt8195-pwrap" for MT8195 SoCs "mediatek,mt8516-pwrap" for MT8516 SoCs - interrupts: IRQ for pwrap in SOC - reg-names: Must include the following entries: diff --git a/dts/Bindings/soc/microchip/microchip,polarfire-soc-sys-controller.yaml b/dts/Bindings/soc/microchip/microchip,polarfire-soc-sys-controller.yaml new file mode 100644 index 0000000000..2cd3bc6bd8 --- /dev/null +++ b/dts/Bindings/soc/microchip/microchip,polarfire-soc-sys-controller.yaml @@ -0,0 +1,35 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/soc/microchip/microchip,polarfire-soc-sys-controller.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: Microchip PolarFire SoC (MPFS) MSS (microprocessor subsystem) system controller + +maintainers: + - Conor Dooley <conor.dooley@microchip.com> + +description: | + The PolarFire SoC system controller is communicated with via a mailbox. + This document describes the bindings for the client portion of that mailbox. + + +properties: + mboxes: + maxItems: 1 + + compatible: + const: microchip,polarfire-soc-sys-controller + +required: + - compatible + - mboxes + +additionalProperties: false + +examples: + - | + syscontroller: syscontroller { + compatible = "microchip,polarfire-soc-sys-controller"; + mboxes = <&mbox 0>; + }; diff --git a/dts/Bindings/soc/qcom/qcom,geni-se.yaml b/dts/Bindings/soc/qcom/qcom,geni-se.yaml index 84671950ca..4663c2bcad 100644 --- a/dts/Bindings/soc/qcom/qcom,geni-se.yaml +++ b/dts/Bindings/soc/qcom/qcom,geni-se.yaml @@ -164,7 +164,6 @@ patternProperties: interrupts: minItems: 1 - maxItems: 2 items: - description: UART core irq - description: Wakeup irq (RX GPIO) diff --git a/dts/Bindings/soc/qcom/qcom,smd-rpm.yaml b/dts/Bindings/soc/qcom/qcom,smd-rpm.yaml index 2684f22a1d..d511f01fca 100644 --- a/dts/Bindings/soc/qcom/qcom,smd-rpm.yaml +++ b/dts/Bindings/soc/qcom/qcom,smd-rpm.yaml @@ -32,12 +32,14 @@ properties: enum: - qcom,rpm-apq8084 - qcom,rpm-ipq6018 + - qcom,rpm-msm8226 - qcom,rpm-msm8916 - qcom,rpm-msm8974 - qcom,rpm-msm8976 - qcom,rpm-msm8996 - qcom,rpm-msm8998 - qcom,rpm-sdm660 + - qcom,rpm-sm6125 - qcom,rpm-qcs404 qcom,smd-channels: diff --git a/dts/Bindings/soc/rockchip/grf.txt b/dts/Bindings/soc/rockchip/grf.txt deleted file mode 100644 index f96511aa38..0000000000 --- a/dts/Bindings/soc/rockchip/grf.txt +++ /dev/null @@ -1,61 +0,0 @@ -* Rockchip General Register Files (GRF) - -The general register file will be used to do static set by software, which -is composed of many registers for system control. - -From RK3368 SoCs, the GRF is divided into two sections, -- GRF, used for general non-secure system, -- SGRF, used for general secure system, -- PMUGRF, used for always on system - -On RK3328 SoCs, the GRF adds a section for USB2PHYGRF, - -ON RK3308 SoC, the GRF is divided into four sections: -- GRF, used for general non-secure system, -- SGRF, used for general secure system, -- DETECTGRF, used for audio codec system, -- COREGRF, used for pvtm, - -Required Properties: - -- compatible: GRF should be one of the following: - - "rockchip,px30-grf", "syscon": for px30 - - "rockchip,rk3036-grf", "syscon": for rk3036 - - "rockchip,rk3066-grf", "syscon": for rk3066 - - "rockchip,rk3188-grf", "syscon": for rk3188 - - "rockchip,rk3228-grf", "syscon": for rk3228 - - "rockchip,rk3288-grf", "syscon": for rk3288 - - "rockchip,rk3308-grf", "syscon": for rk3308 - - "rockchip,rk3328-grf", "syscon": for rk3328 - - "rockchip,rk3368-grf", "syscon": for rk3368 - - "rockchip,rk3399-grf", "syscon": for rk3399 - - "rockchip,rv1108-grf", "syscon": for rv1108 -- compatible: DETECTGRF should be one of the following: - - "rockchip,rk3308-detect-grf", "syscon": for rk3308 -- compatilbe: COREGRF should be one of the following: - - "rockchip,rk3308-core-grf", "syscon": for rk3308 -- compatible: PMUGRF should be one of the following: - - "rockchip,px30-pmugrf", "syscon": for px30 - - "rockchip,rk3368-pmugrf", "syscon": for rk3368 - - "rockchip,rk3399-pmugrf", "syscon": for rk3399 -- compatible: SGRF should be one of the following: - - "rockchip,rk3288-sgrf", "syscon": for rk3288 -- compatible: USB2PHYGRF should be one of the following: - - "rockchip,px30-usb2phy-grf", "syscon": for px30 - - "rockchip,rk3328-usb2phy-grf", "syscon": for rk3328 -- compatible: USBGRF should be one of the following: - - "rockchip,rv1108-usbgrf", "syscon": for rv1108 -- reg: physical base address of the controller and length of memory mapped - region. - -Example: GRF and PMUGRF of RK3399 SoCs - - pmugrf: syscon@ff320000 { - compatible = "rockchip,rk3399-pmugrf", "syscon"; - reg = <0x0 0xff320000 0x0 0x1000>; - }; - - grf: syscon@ff770000 { - compatible = "rockchip,rk3399-grf", "syscon"; - reg = <0x0 0xff770000 0x0 0x10000>; - }; diff --git a/dts/Bindings/soc/rockchip/grf.yaml b/dts/Bindings/soc/rockchip/grf.yaml new file mode 100644 index 0000000000..62fa72cfea --- /dev/null +++ b/dts/Bindings/soc/rockchip/grf.yaml @@ -0,0 +1,261 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/soc/rockchip/grf.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Rockchip General Register Files (GRF) + +maintainers: + - Heiko Stuebner <heiko@sntech.de> + +properties: + compatible: + oneOf: + - items: + - enum: + - rockchip,rk3288-sgrf + - rockchip,rv1108-pmugrf + - rockchip,rv1108-usbgrf + - const: syscon + - items: + - enum: + - rockchip,px30-grf + - rockchip,px30-pmugrf + - rockchip,px30-usb2phy-grf + - rockchip,rk3036-grf + - rockchip,rk3066-grf + - rockchip,rk3188-grf + - rockchip,rk3228-grf + - rockchip,rk3288-grf + - rockchip,rk3308-core-grf + - rockchip,rk3308-detect-grf + - rockchip,rk3308-grf + - rockchip,rk3308-usb2phy-grf + - rockchip,rk3328-grf + - rockchip,rk3328-usb2phy-grf + - rockchip,rk3368-grf + - rockchip,rk3368-pmugrf + - rockchip,rk3399-grf + - rockchip,rk3399-pmugrf + - rockchip,rk3568-grf + - rockchip,rk3568-pmugrf + - rockchip,rv1108-grf + - const: syscon + - const: simple-mfd + + reg: + maxItems: 1 + + "#address-cells": + const: 1 + + "#size-cells": + const: 1 + +required: + - compatible + - reg + +additionalProperties: + type: object + +allOf: + - if: + properties: + compatible: + contains: + const: rockchip,px30-grf + + then: + properties: + lvds: + description: + Documentation/devicetree/bindings/display/rockchip/rockchip-lvds.txt + + - if: + properties: + compatible: + contains: + const: rockchip,rk3288-grf + + then: + properties: + edp-phy: + description: + Documentation/devicetree/bindings/phy/rockchip-dp-phy.txt + + - if: + properties: + compatible: + contains: + enum: + - rockchip,rk3066-grf + - rockchip,rk3188-grf + - rockchip,rk3288-grf + + then: + properties: + usbphy: + type: object + + $ref: "/schemas/phy/rockchip-usb-phy.yaml#" + + unevaluatedProperties: false + + - if: + properties: + compatible: + contains: + const: rockchip,rk3328-grf + + then: + properties: + gpio: + type: object + + $ref: "/schemas/gpio/rockchip,rk3328-grf-gpio.yaml#" + + unevaluatedProperties: false + + power-controller: + type: object + + $ref: "/schemas/power/rockchip,power-controller.yaml#" + + unevaluatedProperties: false + + - if: + properties: + compatible: + contains: + const: rockchip,rk3399-grf + + then: + properties: + mipi-dphy-rx0: + type: object + + $ref: "/schemas/phy/rockchip-mipi-dphy-rx0.yaml#" + + unevaluatedProperties: false + + pcie-phy: + description: + Documentation/devicetree/bindings/phy/rockchip-pcie-phy.txt + + patternProperties: + "phy@[0-9a-f]+$": + description: + Documentation/devicetree/bindings/phy/rockchip-emmc-phy.txt + + - if: + properties: + compatible: + contains: + enum: + - rockchip,px30-pmugrf + - rockchip,rk3036-grf + - rockchip,rk3308-grf + - rockchip,rk3368-pmugrf + + then: + properties: + reboot-mode: + type: object + + $ref: "/schemas/power/reset/syscon-reboot-mode.yaml#" + + unevaluatedProperties: false + + - if: + properties: + compatible: + contains: + enum: + - rockchip,px30-usb2phy-grf + - rockchip,rk3228-grf + - rockchip,rk3308-usb2phy-grf + - rockchip,rk3328-usb2phy-grf + - rockchip,rk3399-grf + - rockchip,rv1108-grf + + then: + required: + - "#address-cells" + - "#size-cells" + + patternProperties: + "usb2phy@[0-9a-f]+$": + type: object + + $ref: "/schemas/phy/phy-rockchip-inno-usb2.yaml#" + + unevaluatedProperties: false + + - if: + properties: + compatible: + contains: + enum: + - rockchip,px30-pmugrf + - rockchip,px30-grf + - rockchip,rk3228-grf + - rockchip,rk3288-grf + - rockchip,rk3328-grf + - rockchip,rk3368-pmugrf + - rockchip,rk3368-grf + - rockchip,rk3399-pmugrf + - rockchip,rk3399-grf + + then: + properties: + io-domains: + description: + Documentation/devicetree/bindings/power/rockchip-io-domain.txt + +examples: + - | + #include <dt-bindings/clock/rk3399-cru.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/power/rk3399-power.h> + grf: syscon@ff770000 { + compatible = "rockchip,rk3399-grf", "syscon", "simple-mfd"; + reg = <0xff770000 0x10000>; + #address-cells = <1>; + #size-cells = <1>; + + mipi_dphy_rx0: mipi-dphy-rx0 { + compatible = "rockchip,rk3399-mipi-dphy-rx0"; + clocks = <&cru SCLK_MIPIDPHY_REF>, + <&cru SCLK_DPHY_RX0_CFG>, + <&cru PCLK_VIO_GRF>; + clock-names = "dphy-ref", "dphy-cfg", "grf"; + power-domains = <&power RK3399_PD_VIO>; + #phy-cells = <0>; + }; + + u2phy0: usb2phy@e450 { + compatible = "rockchip,rk3399-usb2phy"; + reg = <0xe450 0x10>; + clocks = <&cru SCLK_USB2PHY0_REF>; + clock-names = "phyclk"; + #clock-cells = <0>; + clock-output-names = "clk_usbphy0_480m"; + + u2phy0_host: host-port { + #phy-cells = <0>; + interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH 0>; + interrupt-names = "linestate"; + }; + + u2phy0_otg: otg-port { + #phy-cells = <0>; + interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH 0>; + interrupt-names = "otg-bvalid", "otg-id", + "linestate"; + }; + }; + }; diff --git a/dts/Bindings/soc/rockchip/power_domain.txt b/dts/Bindings/soc/rockchip/power_domain.txt deleted file mode 100644 index 8304eceb62..0000000000 --- a/dts/Bindings/soc/rockchip/power_domain.txt +++ /dev/null @@ -1,136 +0,0 @@ -* Rockchip Power Domains - -Rockchip processors include support for multiple power domains which can be -powered up/down by software based on different application scenes to save power. - -Required properties for power domain controller: -- compatible: Should be one of the following. - "rockchip,px30-power-controller" - for PX30 SoCs. - "rockchip,rk3036-power-controller" - for RK3036 SoCs. - "rockchip,rk3066-power-controller" - for RK3066 SoCs. - "rockchip,rk3128-power-controller" - for RK3128 SoCs. - "rockchip,rk3188-power-controller" - for RK3188 SoCs. - "rockchip,rk3228-power-controller" - for RK3228 SoCs. - "rockchip,rk3288-power-controller" - for RK3288 SoCs. - "rockchip,rk3328-power-controller" - for RK3328 SoCs. - "rockchip,rk3366-power-controller" - for RK3366 SoCs. - "rockchip,rk3368-power-controller" - for RK3368 SoCs. - "rockchip,rk3399-power-controller" - for RK3399 SoCs. -- #power-domain-cells: Number of cells in a power-domain specifier. - Should be 1 for multiple PM domains. -- #address-cells: Should be 1. -- #size-cells: Should be 0. - -Required properties for power domain sub nodes: -- reg: index of the power domain, should use macros in: - "include/dt-bindings/power/px30-power.h" - for PX30 type power domain. - "include/dt-bindings/power/rk3036-power.h" - for RK3036 type power domain. - "include/dt-bindings/power/rk3066-power.h" - for RK3066 type power domain. - "include/dt-bindings/power/rk3128-power.h" - for RK3128 type power domain. - "include/dt-bindings/power/rk3188-power.h" - for RK3188 type power domain. - "include/dt-bindings/power/rk3228-power.h" - for RK3228 type power domain. - "include/dt-bindings/power/rk3288-power.h" - for RK3288 type power domain. - "include/dt-bindings/power/rk3328-power.h" - for RK3328 type power domain. - "include/dt-bindings/power/rk3366-power.h" - for RK3366 type power domain. - "include/dt-bindings/power/rk3368-power.h" - for RK3368 type power domain. - "include/dt-bindings/power/rk3399-power.h" - for RK3399 type power domain. -- clocks (optional): phandles to clocks which need to be enabled while power domain - switches state. -- pm_qos (optional): phandles to qos blocks which need to be saved and restored - while power domain switches state. - -Qos Example: - - qos_gpu: qos_gpu@ffaf0000 { - compatible ="syscon"; - reg = <0x0 0xffaf0000 0x0 0x20>; - }; - -Example: - - power: power-controller { - compatible = "rockchip,rk3288-power-controller"; - #power-domain-cells = <1>; - #address-cells = <1>; - #size-cells = <0>; - - pd_gpu { - reg = <RK3288_PD_GPU>; - clocks = <&cru ACLK_GPU>; - pm_qos = <&qos_gpu>; - }; - }; - - power: power-controller { - compatible = "rockchip,rk3368-power-controller"; - #power-domain-cells = <1>; - #address-cells = <1>; - #size-cells = <0>; - - pd_gpu_1 { - reg = <RK3368_PD_GPU_1>; - clocks = <&cru ACLK_GPU_CFG>; - }; - }; - -Example 2: - power: power-controller { - compatible = "rockchip,rk3399-power-controller"; - #power-domain-cells = <1>; - #address-cells = <1>; - #size-cells = <0>; - - pd_vio { - #address-cells = <1>; - #size-cells = <0>; - reg = <RK3399_PD_VIO>; - - pd_vo { - #address-cells = <1>; - #size-cells = <0>; - reg = <RK3399_PD_VO>; - - pd_vopb { - reg = <RK3399_PD_VOPB>; - }; - - pd_vopl { - reg = <RK3399_PD_VOPL>; - }; - }; - }; - }; - -Node of a device using power domains must have a power-domains property, -containing a phandle to the power device node and an index specifying which -power domain to use. -The index should use macros in: - "include/dt-bindings/power/px30-power.h" - for px30 type power domain. - "include/dt-bindings/power/rk3036-power.h" - for rk3036 type power domain. - "include/dt-bindings/power/rk3128-power.h" - for rk3128 type power domain. - "include/dt-bindings/power/rk3128-power.h" - for rk3228 type power domain. - "include/dt-bindings/power/rk3288-power.h" - for rk3288 type power domain. - "include/dt-bindings/power/rk3328-power.h" - for rk3328 type power domain. - "include/dt-bindings/power/rk3366-power.h" - for rk3366 type power domain. - "include/dt-bindings/power/rk3368-power.h" - for rk3368 type power domain. - "include/dt-bindings/power/rk3399-power.h" - for rk3399 type power domain. - -Example of the node using power domain: - - node { - /* ... */ - power-domains = <&power RK3288_PD_GPU>; - /* ... */ - }; - - node { - /* ... */ - power-domains = <&power RK3368_PD_GPU_1>; - /* ... */ - }; - - node { - /* ... */ - power-domains = <&power RK3399_PD_VOPB>; - /* ... */ - }; diff --git a/dts/Bindings/soc/ti/sci-pm-domain.txt b/dts/Bindings/soc/ti/sci-pm-domain.txt deleted file mode 100644 index 6217e64309..0000000000 --- a/dts/Bindings/soc/ti/sci-pm-domain.txt +++ /dev/null @@ -1,65 +0,0 @@ -Texas Instruments TI-SCI Generic Power Domain ---------------------------------------------- - -Some TI SoCs contain a system controller (like the PMMC, etc...) that is -responsible for controlling the state of the IPs that are present. -Communication between the host processor running an OS and the system -controller happens through a protocol known as TI-SCI [1]. - -[1] Documentation/devicetree/bindings/arm/keystone/ti,sci.txt - -PM Domain Node -============== -The PM domain node represents the global PM domain managed by the PMMC, which -in this case is the implementation as documented by the generic PM domain -bindings in Documentation/devicetree/bindings/power/power-domain.yaml. Because -this relies on the TI SCI protocol to communicate with the PMMC it must be a -child of the pmmc node. - -Required Properties: --------------------- -- compatible: should be "ti,sci-pm-domain" -- #power-domain-cells: Can be one of the following: - 1: Containing the device id of each node - 2: First entry should be device id - Second entry should be one of the floowing: - TI_SCI_PD_EXCLUSIVE: To allow device to be - exclusively controlled by - the requesting hosts. - TI_SCI_PD_SHARED: To allow device to be shared - by multiple hosts. - -Example (K2G): -------------- - pmmc: pmmc { - compatible = "ti,k2g-sci"; - ... - - k2g_pds: power-controller { - compatible = "ti,sci-pm-domain"; - #power-domain-cells = <1>; - }; - }; - -PM Domain Consumers -=================== -Hardware blocks belonging to a PM domain should contain a "power-domains" -property that is a phandle pointing to the corresponding PM domain node -along with an index representing the device id to be passed to the PMMC -for device control. - -Required Properties: --------------------- -- power-domains: phandle pointing to the corresponding PM domain node - and an ID representing the device. - -See http://processors.wiki.ti.com/index.php/TISCI#66AK2G02_Data for the list -of valid identifiers for k2g. - -Example (K2G): --------------------- - uart0: serial@2530c00 { - compatible = "ns16550a"; - ... - power-domains = <&k2g_pds 0x002c>; - }; diff --git a/dts/Bindings/soc/ti/sci-pm-domain.yaml b/dts/Bindings/soc/ti/sci-pm-domain.yaml new file mode 100644 index 0000000000..9e6cb4ee97 --- /dev/null +++ b/dts/Bindings/soc/ti/sci-pm-domain.yaml @@ -0,0 +1,59 @@ +# SPDX-License-Identifier: (GPL-2.0-only or BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/soc/ti/sci-pm-domain.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: TI-SCI generic power domain node bindings + +maintainers: + - Nishanth Menon <nm@ti.com> + +allOf: + - $ref: /schemas/power/power-domain.yaml# + +description: | + Some TI SoCs contain a system controller (like the Power Management Micro + Controller (PMMC) on Keystone 66AK2G SoC) that are responsible for controlling + the state of the various hardware modules present on the SoC. Communication + between the host processor running an OS and the system controller happens + through a protocol called TI System Control Interface (TI-SCI protocol). + + This PM domain node represents the global PM domain managed by the TI-SCI + controller. Since this relies on the TI SCI protocol to communicate with + the TI-SCI controller, it must be a child of the TI-SCI controller node. + +properties: + compatible: + const: ti,sci-pm-domain + + "#power-domain-cells": + enum: [1, 2] + description: + The two cells represent values that the TI-SCI controller defines. + + The first cell should contain the device ID. + + The second cell, if cell-value is 2, should be one of the following + TI_SCI_PD_EXCLUSIVE - Allows the device to be exclusively controlled + or + TI_SCI_PD_SHARED - Allows the device to be shared by multiple hosts. + Please refer to dt-bindings/soc/ti,sci_pm_domain.h for the definitions. + + Please see http://processors.wiki.ti.com/index.php/TISCI for + protocol documentation for the values to be used for different devices. + +additionalProperties: false + +examples: + - | + k2g_pds: power-controller { + compatible = "ti,sci-pm-domain"; + #power-domain-cells = <1>; + }; + + - | + k3_pds: power-controller { + compatible = "ti,sci-pm-domain"; + #power-domain-cells = <2>; + }; diff --git a/dts/Bindings/soc/ti/ti,pruss.yaml b/dts/Bindings/soc/ti/ti,pruss.yaml index dbc62821c6..9790617af1 100644 --- a/dts/Bindings/soc/ti/ti,pruss.yaml +++ b/dts/Bindings/soc/ti/ti,pruss.yaml @@ -100,7 +100,6 @@ patternProperties: properties: reg: minItems: 2 # On AM437x one of two PRUSS units don't contain Shared RAM. - maxItems: 3 items: - description: Address and size of the Data RAM0. - description: Address and size of the Data RAM1. @@ -111,7 +110,6 @@ patternProperties: reg-names: minItems: 2 - maxItems: 3 items: - const: dram0 - const: dram1 |