diff options
Diffstat (limited to 'dts/Bindings/spi/snps,dw-apb-ssi.txt')
-rw-r--r-- | dts/Bindings/spi/snps,dw-apb-ssi.txt | 41 |
1 files changed, 0 insertions, 41 deletions
diff --git a/dts/Bindings/spi/snps,dw-apb-ssi.txt b/dts/Bindings/spi/snps,dw-apb-ssi.txt deleted file mode 100644 index 3ed08ee9fe..0000000000 --- a/dts/Bindings/spi/snps,dw-apb-ssi.txt +++ /dev/null @@ -1,41 +0,0 @@ -Synopsys DesignWare AMBA 2.0 Synchronous Serial Interface. - -Required properties: -- compatible : "snps,dw-apb-ssi" or "mscc,<soc>-spi", where soc is "ocelot" or - "jaguar2", or "amazon,alpine-dw-apb-ssi" -- reg : The register base for the controller. For "mscc,<soc>-spi", a second - register set is required (named ICPU_CFG:SPI_MST) -- interrupts : One interrupt, used by the controller. -- #address-cells : <1>, as required by generic SPI binding. -- #size-cells : <0>, also as required by generic SPI binding. -- clocks : phandles for the clocks, see the description of clock-names below. - The phandle for the "ssi_clk" is required. The phandle for the "pclk" clock - is optional. If a single clock is specified but no clock-name, it is the - "ssi_clk" clock. If both clocks are listed, the "ssi_clk" must be first. - -Optional properties: -- clock-names : Contains the names of the clocks: - "ssi_clk", for the core clock used to generate the external SPI clock. - "pclk", the interface clock, required for register access. If a clock domain - used to enable this clock then it should be named "pclk_clkdomain". -- cs-gpios : Specifies the gpio pins to be used for chipselects. -- num-cs : The number of chipselects. If omitted, this will default to 4. -- reg-io-width : The I/O register width (in bytes) implemented by this - device. Supported values are 2 or 4 (the default). - -Child nodes as per the generic SPI binding. - -Example: - - spi@fff00000 { - compatible = "snps,dw-apb-ssi"; - reg = <0xfff00000 0x1000>; - interrupts = <0 154 4>; - #address-cells = <1>; - #size-cells = <0>; - clocks = <&spi_m_clk>; - num-cs = <2>; - cs-gpios = <&gpio0 13 0>, - <&gpio0 14 0>; - }; - |