4 files changed, 30 insertions, 16 deletions
diff --git a/dts/Bindings/thermal/armada-thermal.txt b/dts/Bindings/thermal/armada-thermal.txt
index 24aacf8948..e0d013a2e6 100644
--- a/dts/Bindings/thermal/armada-thermal.txt
+++ b/dts/Bindings/thermal/armada-thermal.txt
@@ -2,22 +2,35 @@
 
 Required properties:
 
-- compatible:	Should be set to one of the following:
-		marvell,armada370-thermal
-		marvell,armada375-thermal
-		marvell,armada380-thermal
-		marvell,armadaxp-thermal
+- compatible: Should be set to one of the following:
+    * marvell,armada370-thermal
+    * marvell,armada375-thermal
+    * marvell,armada380-thermal
+    * marvell,armadaxp-thermal
+    * marvell,armada-ap806-thermal
+    * marvell,armada-cp110-thermal
 
-- reg:		Device's register space.
-		Two entries are expected, see the examples below.
-		The first one is required for the sensor register;
-		the second one is required for the control register
-		to be used for sensor initialization (a.k.a. calibration).
+- reg: Device's register space.
+  Two entries are expected, see the examples below. The first one points
+  to the status register (4B). The second one points to the control
+  registers (8B).
+  Note: The compatibles marvell,armada370-thermal,
+  marvell,armada380-thermal, and marvell,armadaxp-thermal must point to
+  "control MSB/control 1", with size of 4 (deprecated binding), or point
+  to "control LSB/control 0" with size of 8 (current binding). All other
+  compatibles must point to "control LSB/control 0" with size of 8.
 
-Example:
+Examples:
 
+	/* Legacy bindings */
 	thermal@d0018300 {
 		compatible = "marvell,armada370-thermal";
-                reg = <0xd0018300 0x4
+		reg = <0xd0018300 0x4
 		       0xd0018304 0x4>;
 	};
+
+	ap_thermal: thermal@6f8084 {
+		compatible = "marvell,armada-ap806-thermal";
+		reg = <0x6f808C 0x4>,
+		      <0x6f8084 0x8>;
+	};
diff --git a/dts/Bindings/thermal/exynos-thermal.txt b/dts/Bindings/thermal/exynos-thermal.txt
index 9b4c7b0174..1b596fd38d 100644
--- a/dts/Bindings/thermal/exynos-thermal.txt
+++ b/dts/Bindings/thermal/exynos-thermal.txt
@@ -70,7 +70,7 @@ Following properties are mandatory (depending on SoC):
 
 Example 1):
 
-	tmu@100C0000 {
+	tmu@100c0000 {
 		compatible = "samsung,exynos4412-tmu";
 		interrupt-parent = <&combiner>;
 		reg = <0x100C0000 0x100>;
diff --git a/dts/Bindings/thermal/rcar-thermal.txt b/dts/Bindings/thermal/rcar-thermal.txt
index a8e52c8ccf..349e635f2d 100644
--- a/dts/Bindings/thermal/rcar-thermal.txt
+++ b/dts/Bindings/thermal/rcar-thermal.txt
@@ -6,6 +6,7 @@ Required properties:
 			   "renesas,rcar-thermal" (without thermal-zone) as fallback.
 			  Examples with soctypes are:
 			    - "renesas,thermal-r8a73a4" (R-Mobile APE6)
+			    - "renesas,thermal-r8a7743" (RZ/G1M)
 			    - "renesas,thermal-r8a7779" (R-Car H1)
 			    - "renesas,thermal-r8a7790" (R-Car H2)
 			    - "renesas,thermal-r8a7791" (R-Car M2-W)
diff --git a/dts/Bindings/thermal/thermal.txt b/dts/Bindings/thermal/thermal.txt
index 44d7cb2cb2..1719d47a5e 100644
--- a/dts/Bindings/thermal/thermal.txt
+++ b/dts/Bindings/thermal/thermal.txt
@@ -252,7 +252,7 @@ ocp {
 	/*
 	 * A simple IC with a single bandgap temperature sensor.
 	 */
-	bandgap0: bandgap@0000ED00 {
+	bandgap0: bandgap@0000ed00 {
 		...
 		#thermal-sensor-cells = <0>;
 	};
@@ -330,7 +330,7 @@ ocp {
 	/*
 	 * A simple IC with several bandgap temperature sensors.
 	 */
-	bandgap0: bandgap@0000ED00 {
+	bandgap0: bandgap@0000ed00 {
 		...
 		#thermal-sensor-cells = <1>;
 	};
@@ -458,7 +458,7 @@ ocp {
 	/*
 	 * A simple IC with a single bandgap temperature sensor.
 	 */
-	bandgap0: bandgap@0000ED00 {
+	bandgap0: bandgap@0000ed00 {
 		...
 		#thermal-sensor-cells = <0>;
 	};