1 files changed, 0 insertions, 45 deletions
diff --git a/dts/Bindings/ufs/ufs-mediatek.txt b/dts/Bindings/ufs/ufs-mediatek.txt
deleted file mode 100644
index 63a953b672..0000000000
--- a/dts/Bindings/ufs/ufs-mediatek.txt
+++ /dev/null
@@ -1,45 +0,0 @@
-* Mediatek Universal Flash Storage (UFS) Host Controller
-
-UFS nodes are defined to describe on-chip UFS hardware macro.
-Each UFS Host Controller should have its own node.
-
-To bind UFS PHY with UFS host controller, the controller node should
-contain a phandle reference to UFS M-PHY node.
-
-Required properties for UFS nodes:
-- compatible         : Compatible list, contains the following controller:
-                       "mediatek,mt8183-ufshci" for MediaTek UFS host controller
-                       present on MT8183 chipsets.
-                       "mediatek,mt8192-ufshci" for MediaTek UFS host controller
-                       present on MT8192 chipsets.
-- reg                : Address and length of the UFS register set.
-- phys               : phandle to m-phy.
-- clocks             : List of phandle and clock specifier pairs.
-- clock-names        : List of clock input name strings sorted in the same
-                       order as the clocks property. "ufs" is mandatory.
-                       "ufs": ufshci core control clock.
-- freq-table-hz      : Array of <min max> operating frequencies stored in the same
-                       order as the clocks property. If this property is not
-                       defined or a value in the array is "0" then it is assumed
-                       that the frequency is set by the parent clock or a
-                       fixed rate clock source.
-- vcc-supply         : phandle to VCC supply regulator node.
-
-Example:
-
-	ufsphy: phy@11fa0000 {
-		...
-	};
-
-	ufshci@11270000 {
-		compatible = "mediatek,mt8183-ufshci";
-		reg = <0 0x11270000 0 0x2300>;
-		interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_LOW>;
-		phys = <&ufsphy>;
-
-		clocks = <&infracfg_ao INFRACFG_AO_UFS_CG>;
-		clock-names = "ufs";
-		freq-table-hz = <0 0>;
-
-		vcc-supply = <&mt_pmic_vemc_ldo_reg>;
-	};