diff options
Diffstat (limited to 'dts/Bindings/usb/generic.txt')
-rw-r--r-- | dts/Bindings/usb/generic.txt | 51 |
1 files changed, 0 insertions, 51 deletions
diff --git a/dts/Bindings/usb/generic.txt b/dts/Bindings/usb/generic.txt deleted file mode 100644 index e6790d2a4d..0000000000 --- a/dts/Bindings/usb/generic.txt +++ /dev/null @@ -1,51 +0,0 @@ -Generic USB Properties - -Optional properties: - - maximum-speed: tells USB controllers we want to work up to a certain - speed. Valid arguments are "super-speed-plus", - "super-speed", "high-speed", "full-speed" and - "low-speed". In case this isn't passed via DT, USB - controllers should default to their maximum HW - capability. - - dr_mode: tells Dual-Role USB controllers that we want to work on a - particular mode. Valid arguments are "host", - "peripheral" and "otg". In case this attribute isn't - passed via DT, USB DRD controllers should default to - OTG. - - phy_type: tells USB controllers that we want to configure the core to support - a UTMI+ PHY with an 8- or 16-bit interface if UTMI+ is - selected. Valid arguments are "utmi" and "utmi_wide". - In case this isn't passed via DT, USB controllers should - default to HW capability. - - otg-rev: tells usb driver the release number of the OTG and EH supplement - with which the device and its descriptors are compliant, - in binary-coded decimal (i.e. 2.0 is 0200H). This - property is used if any real OTG features(HNP/SRP/ADP) - is enabled, if ADP is required, otg-rev should be - 0x0200 or above. - - companion: phandle of a companion - - hnp-disable: tells OTG controllers we want to disable OTG HNP, normally HNP - is the basic function of real OTG except you want it - to be a srp-capable only B device. - - srp-disable: tells OTG controllers we want to disable OTG SRP, SRP is - optional for OTG device. - - adp-disable: tells OTG controllers we want to disable OTG ADP, ADP is - optional for OTG device. - - usb-role-switch: boolean, indicates that the device is capable of assigning - the USB data role (USB host or USB device) for a given - USB connector, such as Type-C, Type-B(micro). - see connector/usb-connector.txt. - -This is an attribute to a USB controller such as: - -dwc3@4a030000 { - compatible = "synopsys,dwc3"; - reg = <0x4a030000 0xcfff>; - interrupts = <0 92 4> - usb-phy = <&usb2_phy>, <&usb3,phy>; - maximum-speed = "super-speed"; - dr_mode = "otg"; - phy_type = "utmi_wide"; - otg-rev = <0x0200>; - adp-disable; -}; |