diff options
Diffstat (limited to 'dts/Bindings/usb/usb-nop-xceiv.yaml')
| -rw-r--r-- | dts/Bindings/usb/usb-nop-xceiv.yaml | 19 |
1 files changed, 14 insertions, 5 deletions
diff --git a/dts/Bindings/usb/usb-nop-xceiv.yaml b/dts/Bindings/usb/usb-nop-xceiv.yaml index 2824c17285..9b3ea23654 100644 --- a/dts/Bindings/usb/usb-nop-xceiv.yaml +++ b/dts/Bindings/usb/usb-nop-xceiv.yaml @@ -27,6 +27,9 @@ properties: vcc-supply: description: phandle to the regulator that provides power to the PHY. + power-domains: + maxItems: 1 + reset-gpios: maxItems: 1 @@ -34,10 +37,16 @@ properties: description: Should specify the GPIO detecting a VBus insertion maxItems: 1 - vbus-regulator: - description: Should specifiy the regulator supplying current drawn from - the VBus line. - $ref: /schemas/types.yaml#/definitions/phandle + vbus-supply: + description: regulator supplying VBUS. It will be enabled and disabled + dynamically in OTG mode. If the regulator is controlled by a + GPIO line, this should be modeled as a regulator-fixed and + referenced by this supply. + + wakeup-source: + description: + Specify if the USB phy can detect the remote wakeup signal + while the system sleep. required: - compatible @@ -57,7 +66,7 @@ examples: vcc-supply = <&hsusb1_vcc_regulator>; reset-gpios = <&gpio1 7 GPIO_ACTIVE_LOW>; vbus-detect-gpio = <&gpio2 13 GPIO_ACTIVE_HIGH>; - vbus-regulator = <&vbus_regulator>; + vbus-supply = <&vbus_regulator>; #phy-cells = <0>; }; |