diff options
Diffstat (limited to 'dts/src/arm/am335x-nano.dts')
| -rw-r--r-- | dts/src/arm/am335x-nano.dts | 32 |
1 files changed, 26 insertions, 6 deletions
diff --git a/dts/src/arm/am335x-nano.dts b/dts/src/arm/am335x-nano.dts index b6f2567bd6..c447aebd8d 100644 --- a/dts/src/arm/am335x-nano.dts +++ b/dts/src/arm/am335x-nano.dts @@ -120,8 +120,8 @@ uart3_pins: uart3_pins { pinctrl-single,pins = < - AM33XX_PADCONF(AM335X_PIN_LCD_DATA10, PIN_INPUT_PULLUP, MUX_MODE6) /* lcd_data10.uart3_ctsn */ - AM33XX_PADCONF(AM335X_PIN_LCD_DATA11, PIN_OUTPUT, MUX_MODE6) /* lcd_data11.uart3_rtsn */ + AM33XX_PADCONF(AM335X_PIN_LCD_DATA10, PIN_INPUT_PULLUP, MUX_MODE7) /* lcd_data10.gpio2[16] */ + AM33XX_PADCONF(AM335X_PIN_LCD_DATA11, PIN_OUTPUT, MUX_MODE7) /* lcd_data11.gpio2[17] */ AM33XX_PADCONF(AM335X_PIN_SPI0_CS1, PIN_INPUT, MUX_MODE1) /* spi0_cs1.uart3_rxd */ AM33XX_PADCONF(AM335X_PIN_ECAP0_IN_PWM0_OUT, PIN_OUTPUT, MUX_MODE1) /* ecap0_in_pwm0_out.uart3_txd */ >; @@ -129,8 +129,8 @@ uart4_pins: uart4_pins { pinctrl-single,pins = < - AM33XX_PADCONF(AM335X_PIN_LCD_DATA12, PIN_INPUT_PULLUP, MUX_MODE6) /* lcd_data12.uart4_ctsn */ - AM33XX_PADCONF(AM335X_PIN_LCD_DATA13, PIN_OUTPUT, MUX_MODE6) /* lcd_data13.uart4_rtsn */ + AM33XX_PADCONF(AM335X_PIN_LCD_DATA12, PIN_INPUT_PULLUP, MUX_MODE7) /* lcd_data12.gpio0[8] */ + AM33XX_PADCONF(AM335X_PIN_LCD_DATA13, PIN_OUTPUT, MUX_MODE7) /* lcd_data13.gpio0[9] */ AM33XX_PADCONF(AM335X_PIN_UART0_CTSN, PIN_INPUT, MUX_MODE1) /* uart0_ctsn.uart4_rxd */ AM33XX_PADCONF(AM335X_PIN_UART0_RTSN, PIN_OUTPUT, MUX_MODE1) /* uart0_rtsn.uart4_txd */ >; @@ -187,12 +187,22 @@ &uart3 { pinctrl-names = "default"; pinctrl-0 = <&uart3_pins>; + rts-gpio = <&gpio2 17 GPIO_ACTIVE_HIGH>; + rs485-rts-active-high; + rs485-rx-during-tx; + rs485-rts-delay = <1 1>; + linux,rs485-enabled-at-boot-time; status = "okay"; }; &uart4 { pinctrl-names = "default"; pinctrl-0 = <&uart4_pins>; + rts-gpio = <&gpio0 9 GPIO_ACTIVE_HIGH>; + rs485-rts-active-high; + rs485-rx-during-tx; + rs485-rts-delay = <1 1>; + linux,rs485-enabled-at-boot-time; status = "okay"; }; @@ -220,6 +230,11 @@ reg = <0x24>; }; + temperature-sensor@48 { + compatible = "lm75"; + reg = <0x48>; + }; + eeprom@53 { compatible = "microchip,24c02", "atmel,24c02"; reg = <0x53>; @@ -403,8 +418,13 @@ pinctrl-names = "default"; pinctrl-0 = <&mmc1_pins>; bus-width = <4>; - cd-gpios = <&gpio3 8 0>; - wp-gpios = <&gpio3 18 0>; + cd-debounce-delay-ms = <5>; + cd-gpios = <&gpio3 8 GPIO_ACTIVE_LOW>; + wp-gpios = <&gpio3 18 GPIO_ACTIVE_HIGH>; +}; + +&usb0 { + dr_mode = "host"; }; #include "tps65217.dtsi" |