diff options
Diffstat (limited to 'dts/src/arm/animeo_ip.dts')
-rw-r--r-- | dts/src/arm/animeo_ip.dts | 197 |
1 files changed, 0 insertions, 197 deletions
diff --git a/dts/src/arm/animeo_ip.dts b/dts/src/arm/animeo_ip.dts deleted file mode 100644 index 7da718abbd..0000000000 --- a/dts/src/arm/animeo_ip.dts +++ /dev/null @@ -1,197 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * animeo_ip.dts - Device Tree file for Somfy Animeo IP Boards - * - * Copyright (C) 2011-2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> - */ - -/dts-v1/; -#include "at91sam9260.dtsi" - -/ { - model = "Somfy Animeo IP"; - compatible = "somfy,animeo-ip", "atmel,at91sam9260", "atmel,at91sam9"; - - aliases { - serial0 = &usart1; - serial1 = &usart2; - serial2 = &usart0; - serial3 = &dbgu; - serial4 = &usart3; - serial5 = &uart0; - serial6 = &uart1; - }; - - chosen { - stdout-path = &usart2; - }; - - memory@20000000 { - reg = <0x20000000 0x4000000>; - }; - - clocks { - slow_xtal { - clock-frequency = <32768>; - }; - - main_xtal { - clock-frequency = <18432000>; - }; - }; - - ahb { - apb { - tcb0: timer@fffa0000 { - timer@0 { - compatible = "atmel,tcb-timer"; - reg = <0>, <1>; - }; - - timer@2 { - compatible = "atmel,tcb-timer"; - reg = <2>; - }; - }; - - usart0: serial@fffb0000 { - pinctrl-0 = <&pinctrl_usart0 &pinctrl_usart0_rts>; - linux,rs485-enabled-at-boot-time; - status = "okay"; - }; - - usart1: serial@fffb4000 { - pinctrl-0 = <&pinctrl_usart1 &pinctrl_usart1_rts>; - linux,rs485-enabled-at-boot-time; - status = "okay"; - }; - - usart2: serial@fffb8000 { - pinctrl-0 = <&pinctrl_usart2>; - status = "okay"; - }; - - macb0: ethernet@fffc4000 { - pinctrl-0 = <&pinctrl_macb_rmii &pinctrl_macb_rmii_mii>; - phy-mode = "mii"; - status = "okay"; - }; - - mmc0: mmc@fffa8000 { - pinctrl-0 = <&pinctrl_mmc0_clk - &pinctrl_mmc0_slot1_cmd_dat0 - &pinctrl_mmc0_slot1_dat1_3>; - pinctrl-names = "default"; - status = "okay"; - - slot@1 { - reg = <1>; - bus-width = <4>; - }; - }; - - watchdog@fffffd40 { - status = "okay"; - }; - }; - - ebi: ebi@10000000 { - status = "okay"; - - nand_controller: nand-controller { - status = "okay"; - pinctrl-0 = <&pinctrl_nand_cs &pinctrl_nand_rb>; - pinctrl-names = "default"; - - nand@3 { - reg = <0x3 0x0 0x800000>; - rb-gpios = <&pioC 13 GPIO_ACTIVE_HIGH>; - cs-gpios = <&pioC 14 GPIO_ACTIVE_HIGH>; - nand-bus-width = <8>; - nand-ecc-mode = "soft"; - nand-on-flash-bbt; - label = "atmel_nand"; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - barebox@0 { - label = "barebox"; - reg = <0x0 0x58000>; - }; - - u_boot_env@58000 { - label = "u_boot_env"; - reg = <0x58000 0x8000>; - }; - - ubi@60000 { - label = "ubi"; - reg = <0x60000 0x1FA0000>; - }; - }; - }; - }; - }; - - usb0: ohci@500000 { - num-ports = <2>; - atmel,vbus-gpio = <&pioB 15 GPIO_ACTIVE_LOW>; - status = "okay"; - }; - }; - - leds { - compatible = "gpio-leds"; - - power_green { - label = "power_green"; - gpios = <&pioC 17 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "heartbeat"; - }; - - power_red { - label = "power_red"; - gpios = <&pioA 2 GPIO_ACTIVE_HIGH>; - }; - - tx_green { - label = "tx_green"; - gpios = <&pioC 19 GPIO_ACTIVE_HIGH>; - }; - - tx_red { - label = "tx_red"; - gpios = <&pioC 18 GPIO_ACTIVE_HIGH>; - }; - }; - - gpio_keys { - compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; - - keyswitch_in { - label = "keyswitch_in"; - gpios = <&pioB 1 GPIO_ACTIVE_HIGH>; - linux,code = <28>; - wakeup-source; - }; - - error_in { - label = "error_in"; - gpios = <&pioB 2 GPIO_ACTIVE_HIGH>; - linux,code = <29>; - wakeup-source; - }; - - btn { - label = "btn"; - gpios = <&pioC 23 GPIO_ACTIVE_HIGH>; - linux,code = <31>; - wakeup-source; - }; - }; -}; |