diff options
Diffstat (limited to 'dts/src/arm/arm-realview-eb.dtsi')
-rw-r--r-- | dts/src/arm/arm-realview-eb.dtsi | 468 |
1 files changed, 0 insertions, 468 deletions
diff --git a/dts/src/arm/arm-realview-eb.dtsi b/dts/src/arm/arm-realview-eb.dtsi deleted file mode 100644 index 04e8a27ba1..0000000000 --- a/dts/src/arm/arm-realview-eb.dtsi +++ /dev/null @@ -1,468 +0,0 @@ -/* - * Copyright 2016 Linaro Ltd - * - * Permission is hereby granted, free of charge, to any person obtaining a copy - * of this software and associated documentation files (the "Software"), to deal - * in the Software without restriction, including without limitation the rights - * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell - * copies of the Software, and to permit persons to whom the Software is - * furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice shall be included in - * all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL - * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER - * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, - * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN - * THE SOFTWARE. - */ - -#include <dt-bindings/interrupt-controller/irq.h> -#include <dt-bindings/gpio/gpio.h> - -/ { - #address-cells = <1>; - #size-cells = <1>; - compatible = "arm,realview-eb"; - - chosen { }; - - aliases { - serial0 = &serial0; - serial1 = &serial1; - serial2 = &serial2; - serial3 = &serial3; - i2c0 = &i2c; - }; - - memory { - device_type = "memory"; - /* 128 MiB memory @ 0x0 */ - reg = <0x00000000 0x08000000>; - }; - - /* The voltage to the MMC card is hardwired at 3.3V */ - vmmc: fixedregulator@0 { - compatible = "regulator-fixed"; - regulator-name = "vmmc"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-boot-on; - }; - - xtal24mhz: xtal24mhz@24M { - #clock-cells = <0>; - compatible = "fixed-clock"; - clock-frequency = <24000000>; - }; - - timclk: timclk@1M { - #clock-cells = <0>; - compatible = "fixed-factor-clock"; - clock-div = <24>; - clock-mult = <1>; - clocks = <&xtal24mhz>; - }; - - mclk: mclk@24M { - #clock-cells = <0>; - compatible = "fixed-factor-clock"; - clock-div = <1>; - clock-mult = <1>; - clocks = <&xtal24mhz>; - }; - - kmiclk: kmiclk@24M { - #clock-cells = <0>; - compatible = "fixed-factor-clock"; - clock-div = <1>; - clock-mult = <1>; - clocks = <&xtal24mhz>; - }; - - sspclk: sspclk@24M { - #clock-cells = <0>; - compatible = "fixed-factor-clock"; - clock-div = <1>; - clock-mult = <1>; - clocks = <&xtal24mhz>; - }; - - uartclk: uartclk@24M { - #clock-cells = <0>; - compatible = "fixed-factor-clock"; - clock-div = <1>; - clock-mult = <1>; - clocks = <&xtal24mhz>; - }; - - wdogclk: wdogclk@24M { - #clock-cells = <0>; - compatible = "fixed-factor-clock"; - clock-div = <1>; - clock-mult = <1>; - clocks = <&xtal24mhz>; - }; - - /* FIXME: this actually hangs off the PLL clocks */ - pclk: pclk@0 { - #clock-cells = <0>; - compatible = "fixed-clock"; - clock-frequency = <0>; - }; - - flash0@40000000 { - /* 2 * 32MiB NOR Flash memory */ - compatible = "arm,versatile-flash", "cfi-flash"; - reg = <0x40000000 0x04000000>; - bank-width = <4>; - partitions { - compatible = "arm,arm-firmware-suite"; - }; - }; - - flash1@44000000 { - /* 2 * 32MiB NOR Flash memory */ - compatible = "arm,versatile-flash", "cfi-flash"; - reg = <0x44000000 0x04000000>; - bank-width = <4>; - partitions { - compatible = "arm,arm-firmware-suite"; - }; - }; - - /* SMSC LAN91C111 ethernet with PHY and EEPROM */ - ethernet: ethernet@4e000000 { - compatible = "smsc,lan91c111"; - reg = <0x4e000000 0x10000>; - /* - * This means the adapter can be accessed with 8, 16 or - * 32 bit reads/writes. - */ - reg-io-width = <7>; - }; - - usb: usb@4f000000 { - compatible = "nxp,usb-isp1761"; - reg = <0x4f000000 0x20000>; - dr_mode = "peripheral"; - }; - - bridge { - compatible = "ti,ths8134a", "ti,ths8134"; - #address-cells = <1>; - #size-cells = <0>; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - - vga_bridge_in: endpoint { - remote-endpoint = <&clcd_pads>; - }; - }; - - port@1 { - reg = <1>; - - vga_bridge_out: endpoint { - remote-endpoint = <&vga_con_in>; - }; - }; - }; - }; - - vga { - compatible = "vga-connector"; - - port { - vga_con_in: endpoint { - remote-endpoint = <&vga_bridge_out>; - }; - }; - }; - - /* These peripherals are inside the FPGA */ - fpga { - #address-cells = <1>; - #size-cells = <1>; - compatible = "simple-bus"; - ranges; - - syscon: syscon@10000000 { - compatible = "arm,realview-eb-syscon", "syscon", "simple-mfd"; - reg = <0x10000000 0x1000>; - - led@08.0 { - compatible = "register-bit-led"; - offset = <0x08>; - mask = <0x01>; - label = "versatile:0"; - linux,default-trigger = "heartbeat"; - default-state = "on"; - }; - led@08.1 { - compatible = "register-bit-led"; - offset = <0x08>; - mask = <0x02>; - label = "versatile:1"; - linux,default-trigger = "mmc0"; - default-state = "off"; - }; - led@08.2 { - compatible = "register-bit-led"; - offset = <0x08>; - mask = <0x04>; - label = "versatile:2"; - linux,default-trigger = "cpu0"; - default-state = "off"; - }; - led@08.3 { - compatible = "register-bit-led"; - offset = <0x08>; - mask = <0x08>; - label = "versatile:3"; - default-state = "off"; - }; - led@08.4 { - compatible = "register-bit-led"; - offset = <0x08>; - mask = <0x10>; - label = "versatile:4"; - default-state = "off"; - }; - led@08.5 { - compatible = "register-bit-led"; - offset = <0x08>; - mask = <0x20>; - label = "versatile:5"; - default-state = "off"; - }; - led@08.6 { - compatible = "register-bit-led"; - offset = <0x08>; - mask = <0x40>; - label = "versatile:6"; - default-state = "off"; - }; - led@08.7 { - compatible = "register-bit-led"; - offset = <0x08>; - mask = <0x80>; - label = "versatile:7"; - default-state = "off"; - }; - oscclk0: osc0@0c { - compatible = "arm,syscon-icst307"; - #clock-cells = <0>; - lock-offset = <0x20>; - vco-offset = <0x0C>; - clocks = <&xtal24mhz>; - }; - oscclk1: osc1@10 { - compatible = "arm,syscon-icst307"; - #clock-cells = <0>; - lock-offset = <0x20>; - vco-offset = <0x10>; - clocks = <&xtal24mhz>; - }; - oscclk2: osc2@14 { - compatible = "arm,syscon-icst307"; - #clock-cells = <0>; - lock-offset = <0x20>; - vco-offset = <0x14>; - clocks = <&xtal24mhz>; - }; - oscclk3: osc3@18 { - compatible = "arm,syscon-icst307"; - #clock-cells = <0>; - lock-offset = <0x20>; - vco-offset = <0x18>; - clocks = <&xtal24mhz>; - }; - oscclk4: osc4@1c { - compatible = "arm,syscon-icst307"; - #clock-cells = <0>; - lock-offset = <0x20>; - vco-offset = <0x1c>; - clocks = <&xtal24mhz>; - }; - }; - - i2c: i2c@10002000 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "arm,versatile-i2c"; - reg = <0x10002000 0x1000>; - - rtc@68 { - compatible = "dallas,ds1338"; - reg = <0x68>; - }; - }; - - aaci: aaci@10004000 { - compatible = "arm,pl041", "arm,primecell"; - reg = <0x10004000 0x1000>; - clocks = <&pclk>; - clock-names = "apb_pclk"; - }; - - mmc: mmcsd@10005000 { - compatible = "arm,pl18x", "arm,primecell"; - reg = <0x10005000 0x1000>; - - /* Due to frequent FIFO overruns, use just 500 kHz */ - max-frequency = <500000>; - bus-width = <4>; - cap-sd-highspeed; - cap-mmc-highspeed; - clocks = <&mclk>, <&pclk>; - clock-names = "mclk", "apb_pclk"; - vmmc-supply = <&vmmc>; - cd-gpios = <&gpio1 0 GPIO_ACTIVE_LOW>; - wp-gpios = <&gpio1 1 GPIO_ACTIVE_HIGH>; - }; - - kmi0: kmi@10006000 { - compatible = "arm,pl050", "arm,primecell"; - reg = <0x10006000 0x1000>; - clocks = <&kmiclk>, <&pclk>; - clock-names = "KMIREFCLK", "apb_pclk"; - }; - - kmi1: kmi@10007000 { - compatible = "arm,pl050", "arm,primecell"; - reg = <0x10007000 0x1000>; - clocks = <&kmiclk>, <&pclk>; - clock-names = "KMIREFCLK", "apb_pclk"; - }; - - charlcd: fpga_charlcd: charlcd@10008000 { - compatible = "arm,versatile-lcd"; - reg = <0x10008000 0x1000>; - clocks = <&pclk>; - clock-names = "apb_pclk"; - }; - - serial0: serial@10009000 { - compatible = "arm,pl011", "arm,primecell"; - reg = <0x10009000 0x1000>; - clocks = <&uartclk>, <&pclk>; - clock-names = "uartclk", "apb_pclk"; - }; - - serial1: serial@1000a000 { - compatible = "arm,pl011", "arm,primecell"; - reg = <0x1000a000 0x1000>; - clocks = <&uartclk>, <&pclk>; - clock-names = "uartclk", "apb_pclk"; - }; - - serial2: serial@1000b000 { - compatible = "arm,pl011", "arm,primecell"; - reg = <0x1000b000 0x1000>; - clocks = <&uartclk>, <&pclk>; - clock-names = "uartclk", "apb_pclk"; - }; - - serial3: serial@1000c000 { - compatible = "arm,pl011", "arm,primecell"; - reg = <0x1000c000 0x1000>; - clocks = <&uartclk>, <&pclk>; - clock-names = "uartclk", "apb_pclk"; - }; - - ssp: spi@1000d000 { - compatible = "arm,pl022", "arm,primecell"; - reg = <0x1000d000 0x1000>; - clocks = <&sspclk>, <&pclk>; - clock-names = "SSPCLK", "apb_pclk"; - }; - - wdog: watchdog@10010000 { - compatible = "arm,sp805", "arm,primecell"; - reg = <0x10010000 0x1000>; - clocks = <&wdogclk>, <&pclk>; - clock-names = "wdog_clk", "apb_pclk"; - status = "disabled"; - }; - - timer01: timer@10011000 { - compatible = "arm,sp804", "arm,primecell"; - reg = <0x10011000 0x1000>; - clocks = <&timclk>, <&timclk>, <&pclk>; - clock-names = "timer1", "timer2", "apb_pclk"; - }; - - timer23: timer@10012000 { - compatible = "arm,sp804", "arm,primecell"; - reg = <0x10012000 0x1000>; - clocks = <&timclk>, <&timclk>, <&pclk>; - clock-names = "timer1", "timer2", "apb_pclk"; - }; - - gpio0: gpio@10013000 { - compatible = "arm,pl061", "arm,primecell"; - reg = <0x10013000 0x1000>; - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - clocks = <&pclk>; - clock-names = "apb_pclk"; - }; - - gpio1: gpio@10014000 { - compatible = "arm,pl061", "arm,primecell"; - reg = <0x10014000 0x1000>; - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - clocks = <&pclk>; - clock-names = "apb_pclk"; - }; - - gpio2: gpio@10015000 { - compatible = "arm,pl061", "arm,primecell"; - reg = <0x10015000 0x1000>; - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - clocks = <&pclk>; - clock-names = "apb_pclk"; - }; - - rtc: rtc@10017000 { - compatible = "arm,pl031", "arm,primecell"; - reg = <0x10017000 0x1000>; - clocks = <&pclk>; - clock-names = "apb_pclk"; - }; - - clcd: clcd@10020000 { - compatible = "arm,pl111", "arm,primecell"; - reg = <0x10020000 0x1000>; - interrupt-names = "combined"; - clocks = <&oscclk0>, <&pclk>; - clock-names = "clcdclk", "apb_pclk"; - /* 1024x768 16bpp @65MHz works fine */ - max-memory-bandwidth = <95000000>; - - port { - clcd_pads: endpoint { - remote-endpoint = <&vga_bridge_in>; - arm,pl11x,tft-r0g0b0-pads = <0 8 16>; - }; - }; - }; - }; -}; |