diff options
Diffstat (limited to 'dts/src/arm/armada-385-db.dts')
-rw-r--r-- | dts/src/arm/armada-385-db.dts | 151 |
1 files changed, 0 insertions, 151 deletions
diff --git a/dts/src/arm/armada-385-db.dts b/dts/src/arm/armada-385-db.dts deleted file mode 100644 index 2aaa9d2ac2..0000000000 --- a/dts/src/arm/armada-385-db.dts +++ /dev/null @@ -1,151 +0,0 @@ -/* - * Device Tree file for Marvell Armada 385 evaluation board - * (DB-88F6820) - * - * Copyright (C) 2014 Marvell - * - * Thomas Petazzoni <thomas.petazzoni@free-electrons.com> - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -/dts-v1/; -#include "armada-385.dtsi" - -/ { - model = "Marvell Armada 385 Development Board"; - compatible = "marvell,a385-db", "marvell,armada385", "marvell,armada380"; - - chosen { - bootargs = "console=ttyS0,115200 earlyprintk"; - }; - - memory { - device_type = "memory"; - reg = <0x00000000 0x10000000>; /* 256 MB */ - }; - - soc { - ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000 - MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000>; - - internal-regs { - spi@10600 { - status = "okay"; - - spi-flash@0 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "w25q32"; - reg = <0>; /* Chip select 0 */ - spi-max-frequency = <108000000>; - }; - }; - - i2c@11000 { - status = "okay"; - clock-frequency = <100000>; - }; - - i2c@11100 { - status = "okay"; - clock-frequency = <100000>; - }; - - serial@12000 { - status = "okay"; - }; - - ethernet@30000 { - status = "okay"; - phy = <&phy1>; - phy-mode = "rgmii-id"; - }; - - usb@50000 { - status = "ok"; - }; - - ethernet@70000 { - status = "okay"; - phy = <&phy0>; - phy-mode = "rgmii-id"; - }; - - mdio { - phy0: ethernet-phy@0 { - reg = <0>; - }; - - phy1: ethernet-phy@1 { - reg = <1>; - }; - }; - - sata@a8000 { - status = "okay"; - }; - - sata@e0000 { - status = "okay"; - }; - - flash@d0000 { - status = "okay"; - num-cs = <1>; - marvell,nand-keep-config; - marvell,nand-enable-arbiter; - nand-on-flash-bbt; - nand-ecc-strength = <4>; - nand-ecc-step-size = <512>; - - partition@0 { - label = "U-Boot"; - reg = <0 0x800000>; - }; - partition@800000 { - label = "Linux"; - reg = <0x800000 0x800000>; - }; - partition@1000000 { - label = "Filesystem"; - reg = <0x1000000 0x3f000000>; - }; - }; - - sdhci@d8000 { - broken-cd; - wp-inverted; - bus-width = <8>; - status = "okay"; - no-1-8-v; - }; - - usb3@f0000 { - status = "okay"; - }; - - usb3@f8000 { - status = "okay"; - }; - }; - - pcie-controller { - status = "okay"; - /* - * The two PCIe units are accessible through - * standard PCIe slots on the board. - */ - pcie@1,0 { - /* Port 0, Lane 0 */ - status = "okay"; - }; - pcie@2,0 { - /* Port 1, Lane 0 */ - status = "okay"; - }; - }; - }; -}; |