diff options
Diffstat (limited to 'dts/src/arm/armada-385-synology-ds116.dts')
-rw-r--r-- | dts/src/arm/armada-385-synology-ds116.dts | 292 |
1 files changed, 0 insertions, 292 deletions
diff --git a/dts/src/arm/armada-385-synology-ds116.dts b/dts/src/arm/armada-385-synology-ds116.dts deleted file mode 100644 index d8769956cb..0000000000 --- a/dts/src/arm/armada-385-synology-ds116.dts +++ /dev/null @@ -1,292 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0 OR MIT) -/* - * Device Tree file for Synology DS116 NAS - * - * Copyright (C) 2017 Willy Tarreau <w@1wt.eu> - */ - -/dts-v1/; -#include "armada-385.dtsi" -#include <dt-bindings/gpio/gpio.h> - -/ { - model = "Synology DS116"; - compatible = "marvell,a385-gp", "marvell,armada385", "marvell,armada380"; - - chosen { - stdout-path = "serial0:115200n8"; - }; - - memory { - device_type = "memory"; - reg = <0x00000000 0x40000000>; /* 1 GB */ - }; - - soc { - ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000 - MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000 - MBUS_ID(0x09, 0x19) 0 0xf1100000 0x10000 - MBUS_ID(0x09, 0x15) 0 0xf1110000 0x10000 - MBUS_ID(0x0c, 0x04) 0 0xf1200000 0x100000>; - - internal-regs { - i2c@11000 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c0_pins>; - status = "okay"; - clock-frequency = <100000>; - - eeprom@57 { - compatible = "atmel,24c64"; - reg = <0x57>; - }; - }; - - serial@12000 { - pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins>; - status = "okay"; - }; - - serial@12100 { - /* A PIC16F1829 is connected to uart1 at 9600 bps, - * and takes single-character orders : - * "1" : power off // already handled by the poweroff node - * "2" : short beep - * "3" : long beep - * "4" : turn the power LED ON - * "5" : flash the power LED - * "6" : turn the power LED OFF - * "7" : turn the status LED OFF - * "8" : turn the status LED ON - * "9" : flash the status LED - * "A" : flash the motherboard LED (D8) - * "B" : turn the motherboard LED OFF - * "C" : hard reset - */ - pinctrl-names = "default"; - pinctrl-0 = <&uart1_pins>; - status = "okay"; - }; - - poweroff@12100 { - compatible = "synology,power-off"; - reg = <0x12100 0x100>; - clocks = <&coreclk 0>; - }; - - ethernet@70000 { - pinctrl-names = "default"; - phy = <&phy0>; - phy-mode = "sgmii"; - buffer-manager = <&bm>; - bm,pool-long = <0>; - status = "okay"; - }; - - - mdio@72004 { - pinctrl-names = "default"; - pinctrl-0 = <&mdio_pins>; - - phy0: ethernet-phy@1 { - reg = <1>; - }; - }; - - sata@a8000 { - pinctrl-names = "default"; - pinctrl-0 = <&sata0_pins>; - status = "okay"; - #address-cells = <1>; - #size-cells = <0>; - - sata0: sata-port@0 { - reg = <0>; - target-supply = <®_5v_sata0>; - }; - }; - - bm@c8000 { - status = "okay"; - }; - - usb3@f0000 { - usb-phy = <&usb3_0_phy>; - status = "okay"; - }; - - usb3@f8000 { - usb-phy = <&usb3_1_phy>; - status = "okay"; - }; - }; - - bm-bppi { - status = "okay"; - }; - - gpio-fan { - compatible = "gpio-fan"; - gpios = <&gpio1 18 GPIO_ACTIVE_HIGH>, - <&gpio1 17 GPIO_ACTIVE_HIGH>, - <&gpio1 16 GPIO_ACTIVE_HIGH>; - gpio-fan,speed-map = < 0 0 - 1500 1 - 2500 2 - 3000 3 - 3400 4 - 3700 5 - 3900 6 - 4000 7>; - #cooling-cells = <2>; - }; - - gpio-leds { - compatible = "gpio-leds"; - - /* The green part is on gpio0.20 which is also used by - * sata0, and accesses to SATA disk 0 make it blink so it - * doesn't need to be declared here. - */ - orange { - gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>; - label = "ds116:orange:disk"; - default-state = "off"; - }; - }; - }; - - usb3_0_phy: usb3_0_phy { - compatible = "usb-nop-xceiv"; - vcc-supply = <®_usb3_0_vbus>; - #phy-cells = <0>; - }; - - usb3_1_phy: usb3_1_phy { - compatible = "usb-nop-xceiv"; - vcc-supply = <®_usb3_1_vbus>; - #phy-cells = <0>; - }; - - reg_usb3_0_vbus: usb3-vbus0 { - compatible = "regulator-fixed"; - regulator-name = "usb3-vbus0"; - pinctrl-names = "default"; - pinctrl-0 = <&xhci0_vbus_pins>; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - enable-active-high; - gpio = <&gpio1 26 GPIO_ACTIVE_HIGH>; - }; - - reg_usb3_1_vbus: usb3-vbus1 { - compatible = "regulator-fixed"; - regulator-name = "usb3-vbus1"; - pinctrl-names = "default"; - pinctrl-0 = <&xhci1_vbus_pins>; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - enable-active-high; - gpio = <&gpio1 27 GPIO_ACTIVE_HIGH>; - }; - - reg_sata0: pwr-sata0 { - compatible = "regulator-fixed"; - regulator-name = "pwr_en_sata0"; - regulator-min-microvolt = <12000000>; - regulator-max-microvolt = <12000000>; - enable-active-high; - regulator-boot-on; - gpio = <&gpio0 15 GPIO_ACTIVE_HIGH>; - }; - - reg_5v_sata0: v5-sata0 { - compatible = "regulator-fixed"; - regulator-name = "v5.0-sata0"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - vin-supply = <®_sata0>; - }; - - reg_12v_sata0: v12-sata0 { - compatible = "regulator-fixed"; - regulator-name = "v12.0-sata0"; - regulator-min-microvolt = <12000000>; - regulator-max-microvolt = <12000000>; - vin-supply = <®_sata0>; - }; -}; - -&spi0 { - pinctrl-names = "default"; - pinctrl-0 = <&spi0_pins>; - status = "okay"; - - spi-flash@0 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "macronix,mx25l6405d", "jedec,spi-nor"; - reg = <0>; /* Chip select 0 */ - spi-max-frequency = <50000000>; - m25p,fast-read; - - /* Note: there is a redboot partition table despite u-boot - * being used. The names presented here are the same as those - * found in the FIS directory. There is also a small device - * tree in the last 64kB of the RedBoot partition which is not - * enumerated. The MAC address and the serial number are listed - * in the "vendor" partition. - */ - partition@0 { - label = "RedBoot"; - reg = <0x00000000 0x000f0000>; - read-only; - }; - - partition@c0000 { - label = "zImage"; - reg = <0x000f0000 0x002d0000>; - }; - - partition@390000 { - label = "rd.gz"; - reg = <0x003c0000 0x00410000>; - }; - - partition@7d0000 { - label = "vendor"; - reg = <0x007d0000 0x00010000>; - read-only; - }; - - partition@7e0000 { - label = "RedBoot config"; - reg = <0x007e0000 0x00010000>; - read-only; - }; - - partition@7f0000 { - label = "FIS directory"; - reg = <0x007f0000 0x00010000>; - read-only; - }; - }; -}; - -&pinctrl { - /* use only one pin for UART1, as mpp20 is used by sata0 */ - uart1_pins: uart-pins-1 { - marvell,pins = "mpp19"; - marvell,function = "ua1"; - }; - - xhci0_vbus_pins: xhci0_vbus_pins { - marvell,pins = "mpp58"; - marvell,function = "gpio"; - }; - xhci1_vbus_pins: xhci1_vbus_pins { - marvell,pins = "mpp59"; - marvell,function = "gpio"; - }; -}; |