1 files changed, 45 insertions, 48 deletions
diff --git a/dts/src/arm/at91-cosino_mega2560.dts b/dts/src/arm/at91-cosino_mega2560.dts
index 8fde06adf7..73e88d1ba4 100644
--- a/dts/src/arm/at91-cosino_mega2560.dts
+++ b/dts/src/arm/at91-cosino_mega2560.dts
@@ -17,61 +17,58 @@
 / {
 	model = "HCE Cosino Mega 2560";
 	compatible = "hce,cosino_mega2560", "atmel,at91sam9x5", "atmel,at91sam9";
+};
+
+&adc0 {
+	atmel,adc-ts-wires = <4>;
+	atmel,adc-ts-pressure-threshold = <10000>;
+	status = "okay";
+};
 
-	ahb {
-		apb {
-			macb0: ethernet@f802c000 {
-				phy-mode = "rmii";
-				status = "okay";
-			};
+&macb0 {
+	phy-mode = "rmii";
+	status = "okay";
+};
 
-			adc0: adc@f804c000 {
-				atmel,adc-ts-wires = <4>;
-				atmel,adc-ts-pressure-threshold = <10000>;
-				status = "okay";
-			};
+&mmc1 {
+	pinctrl-0 = <
+		&pinctrl_mmc1_slot0_clk_cmd_dat0
+		&pinctrl_mmc1_slot0_dat1_3>;
+	status = "okay";
 
-			rtc@fffffeb0 {
-				status = "okay";
-			};
+	slot@0 {
+		reg = <0>;
+		bus-width = <4>;
+		non-removable;
+	};
+};
 
-			usart1: serial@f8020000 {
-				status = "okay";
-			};
+&rtc {
+	status = "okay";
+};
 
-			usart2: serial@f8024000 {
-				status = "okay";
-			};
+&usart1 {
+	status = "okay";
+};
 
-			usb2: gadget@f803c000 {
-				atmel,vbus-gpio = <&pioB 16 GPIO_ACTIVE_HIGH>;
-				status = "okay";
-			};
+&usart2 {
+	status = "okay";
+};
 
-			mmc1: mmc@f000c000 {
-				pinctrl-0 = <
-					&pinctrl_mmc1_slot0_clk_cmd_dat0
-					&pinctrl_mmc1_slot0_dat1_3>;
-				status = "okay";
-				slot@0 {
-					reg = <0>;
-					bus-width = <4>;
-					non-removable;
-				};
-			};
-		};
+&usb0 {
+	num-ports = <3>;
+	atmel,vbus-gpio = <0 /* &pioD 18 GPIO_ACTIVE_LOW */
+			   &pioD 19 GPIO_ACTIVE_LOW
+			   &pioD 20 GPIO_ACTIVE_LOW
+			  >;
+	status = "okay";
+};
 
-		usb0: ohci@600000 {
-			status = "okay";
-			num-ports = <3>;
-			atmel,vbus-gpio = <0 /* &pioD 18 GPIO_ACTIVE_LOW */
-					   &pioD 19 GPIO_ACTIVE_LOW
-					   &pioD 20 GPIO_ACTIVE_LOW
-					  >;
-		};
+&usb1 {
+	status = "okay";
+};
 
-		usb1: ehci@700000 {
-			status = "okay";
-		};
-	};
+&usb2 {
+	atmel,vbus-gpio = <&pioB 16 GPIO_ACTIVE_HIGH>;
+	status = "okay";
 };