diff options
Diffstat (limited to 'dts/src/arm/at91sam9260.dtsi')
| -rw-r--r-- | dts/src/arm/at91sam9260.dtsi | 8 |
1 files changed, 8 insertions, 0 deletions
diff --git a/dts/src/arm/at91sam9260.dtsi b/dts/src/arm/at91sam9260.dtsi index 9d9820db94..789fe356db 100644 --- a/dts/src/arm/at91sam9260.dtsi +++ b/dts/src/arm/at91sam9260.dtsi @@ -11,6 +11,7 @@ #include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/clock/at91.h> +#include <dt-bindings/mfd/at91-usart.h> / { #address-cells = <1>; @@ -532,6 +533,7 @@ dbgu: serial@fffff200 { compatible = "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart"; reg = <0xfffff200 0x200>; + atmel,usart-mode = <AT91_USART_MODE_SERIAL>; interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_dbgu>; @@ -543,6 +545,7 @@ usart0: serial@fffb0000 { compatible = "atmel,at91sam9260-usart"; reg = <0xfffb0000 0x200>; + atmel,usart-mode = <AT91_USART_MODE_SERIAL>; interrupts = <6 IRQ_TYPE_LEVEL_HIGH 5>; atmel,use-dma-rx; atmel,use-dma-tx; @@ -556,6 +559,7 @@ usart1: serial@fffb4000 { compatible = "atmel,at91sam9260-usart"; reg = <0xfffb4000 0x200>; + atmel,usart-mode = <AT91_USART_MODE_SERIAL>; interrupts = <7 IRQ_TYPE_LEVEL_HIGH 5>; atmel,use-dma-rx; atmel,use-dma-tx; @@ -569,6 +573,7 @@ usart2: serial@fffb8000 { compatible = "atmel,at91sam9260-usart"; reg = <0xfffb8000 0x200>; + atmel,usart-mode = <AT91_USART_MODE_SERIAL>; interrupts = <8 IRQ_TYPE_LEVEL_HIGH 5>; atmel,use-dma-rx; atmel,use-dma-tx; @@ -582,6 +587,7 @@ usart3: serial@fffd0000 { compatible = "atmel,at91sam9260-usart"; reg = <0xfffd0000 0x200>; + atmel,usart-mode = <AT91_USART_MODE_SERIAL>; interrupts = <23 IRQ_TYPE_LEVEL_HIGH 5>; atmel,use-dma-rx; atmel,use-dma-tx; @@ -595,6 +601,7 @@ uart0: serial@fffd4000 { compatible = "atmel,at91sam9260-usart"; reg = <0xfffd4000 0x200>; + atmel,usart-mode = <AT91_USART_MODE_SERIAL>; interrupts = <24 IRQ_TYPE_LEVEL_HIGH 5>; atmel,use-dma-rx; atmel,use-dma-tx; @@ -608,6 +615,7 @@ uart1: serial@fffd8000 { compatible = "atmel,at91sam9260-usart"; reg = <0xfffd8000 0x200>; + atmel,usart-mode = <AT91_USART_MODE_SERIAL>; interrupts = <25 IRQ_TYPE_LEVEL_HIGH 5>; atmel,use-dma-rx; atmel,use-dma-tx; |