1 files changed, 0 insertions, 167 deletions
diff --git a/dts/src/arm/at91sam9x5ek.dtsi b/dts/src/arm/at91sam9x5ek.dtsi
deleted file mode 100644
index 6d1264de60..0000000000
--- a/dts/src/arm/at91sam9x5ek.dtsi
+++ /dev/null
@@ -1,167 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * at91sam9x5ek.dtsi - Device Tree file for AT91SAM9x5CM Base board
- *
- *  Copyright (C) 2012 Atmel,
- *                2012 Nicolas Ferre <nicolas.ferre@atmel.com>
- */
-#include "at91sam9x5cm.dtsi"
-
-/ {
-	model = "Atmel AT91SAM9X5-EK";
-	compatible = "atmel,at91sam9x5ek", "atmel,at91sam9x5", "atmel,at91sam9";
-
-	chosen {
-		bootargs = "root=/dev/mtdblock1 rw rootfstype=ubifs ubi.mtd=1 root=ubi0:rootfs";
-		stdout-path = "serial0:115200n8";
-	};
-
-	sound {
-		compatible = "atmel,sam9x5-wm8731-audio";
-
-		atmel,model = "wm8731 @ AT91SAM9X5EK";
-
-		atmel,audio-routing =
-			"Headphone Jack", "RHPOUT",
-			"Headphone Jack", "LHPOUT",
-			"LLINEIN", "Line In Jack",
-			"RLINEIN", "Line In Jack";
-
-		atmel,ssc-controller = <&ssc0>;
-		atmel,audio-codec = <&wm8731>;
-	};
-};
-
-&adc0 {
-	atmel,adc-ts-wires = <4>;
-	atmel,adc-ts-pressure-threshold = <10000>;
-	status = "okay";
-};
-
-&dbgu {
-	status = "okay";
-};
-
-&i2c0 {
-	status = "okay";
-
-	wm8731: wm8731@1a {
-		compatible = "wm8731";
-		reg = <0x1a>;
-	};
-};
-
-&mmc0 {
-	pinctrl-0 = <
-		&pinctrl_board_mmc0
-		&pinctrl_mmc0_slot0_clk_cmd_dat0
-		&pinctrl_mmc0_slot0_dat1_3>;
-	pinctrl-names = "default";
-	status = "okay";
-
-	slot@0 {
-		reg = <0>;
-		bus-width = <4>;
-		cd-gpios = <&pioD 15 GPIO_ACTIVE_HIGH>;
-	};
-};
-
-&mmc1 {
-	pinctrl-0 = <
-		&pinctrl_board_mmc1
-		&pinctrl_mmc1_slot0_clk_cmd_dat0
-		&pinctrl_mmc1_slot0_dat1_3>;
-	pinctrl-names = "default";
-	status = "okay";
-
-	slot@0 {
-		reg = <0>;
-		bus-width = <4>;
-		cd-gpios = <&pioD 14 GPIO_ACTIVE_HIGH>;
-	};
-};
-
-&pinctrl {
-	camera_sensor {
-		pinctrl_pck0_as_isi_mck: pck0_as_isi_mck-0 {
-			atmel,pins =
-				<AT91_PIOC 15 AT91_PERIPH_C AT91_PINCTRL_NONE>;	/* ISI_MCK */
-		};
-
-		pinctrl_sensor_power: sensor_power-0 {
-			atmel,pins =
-				<AT91_PIOA 13 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
-		};
-
-		pinctrl_sensor_reset: sensor_reset-0 {
-			atmel,pins =
-				<AT91_PIOA 7 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
-		};
-	};
-
-	mmc0 {
-		pinctrl_board_mmc0: mmc0-board {
-			atmel,pins =
-				<AT91_PIOD 15 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;	/* PD15 gpio CD pin pull up and deglitch */
-		};
-	};
-
-	mmc1 {
-		pinctrl_board_mmc1: mmc1-board {
-			atmel,pins =
-				<AT91_PIOD 14 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;	/* PD14 gpio CD pin pull up and deglitch */
-		};
-	};
-
-	usb2 {
-		pinctrl_board_usb2: usb2-board {
-			atmel,pins =
-				<AT91_PIOB 16 AT91_PERIPH_GPIO AT91_PINCTRL_DEGLITCH>;		/* PB16 gpio vbus sense, deglitch */
-		};
-	};
-};
-
-&spi0 {
-	cs-gpios = <&pioA 14 0>, <0>, <0>, <0>;
-	status = "disabled"; /* conflicts with mmc1 */
-
-	m25p80@0 {
-		compatible = "atmel,at25df321a";
-		spi-max-frequency = <50000000>;
-		reg = <0>;
-	};
-};
-
-&ssc0 {
-	status = "okay";
-};
-
-&usart0 {
-	atmel,use-dma-rx;
-	atmel,use-dma-tx;
-	status = "okay";
-};
-
-&usb0 {
-	num-ports = <3>;
-	atmel,vbus-gpio = <0 /* &pioD 18 GPIO_ACTIVE_LOW *//* Activate to have access to port A */
-			   &pioD 19 GPIO_ACTIVE_LOW
-			   &pioD 20 GPIO_ACTIVE_LOW
-			  >;
-	status = "okay";
-};
-
-&usb1 {
-	status = "okay";
-};
-
-&usb2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_board_usb2>;
-	atmel,vbus-gpio = <&pioB 16 GPIO_ACTIVE_HIGH>;
-	status = "okay";
-};
-
-&watchdog {
-	status = "okay";
-};