diff options
Diffstat (limited to 'dts/src/arm/bcm2711-rpi-4-b.dts')
-rw-r--r-- | dts/src/arm/bcm2711-rpi-4-b.dts | 143 |
1 files changed, 0 insertions, 143 deletions
diff --git a/dts/src/arm/bcm2711-rpi-4-b.dts b/dts/src/arm/bcm2711-rpi-4-b.dts deleted file mode 100644 index efea891b1a..0000000000 --- a/dts/src/arm/bcm2711-rpi-4-b.dts +++ /dev/null @@ -1,143 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/dts-v1/; -#include "bcm2711.dtsi" -#include "bcm2835-rpi.dtsi" -#include "bcm283x-rpi-usb-peripheral.dtsi" - -/ { - compatible = "raspberrypi,4-model-b", "brcm,bcm2711"; - model = "Raspberry Pi 4 Model B"; - - chosen { - /* 8250 auxiliary UART instead of pl011 */ - stdout-path = "serial1:115200n8"; - }; - - /* Will be filled by the bootloader */ - memory@0 { - device_type = "memory"; - reg = <0 0 0>; - }; - - aliases { - ethernet0 = &genet; - pcie0 = &pcie0; - }; - - leds { - act { - gpios = <&gpio 42 GPIO_ACTIVE_HIGH>; - }; - - pwr { - label = "PWR"; - gpios = <&expgpio 2 GPIO_ACTIVE_LOW>; - default-state = "keep"; - linux,default-trigger = "default-on"; - }; - }; - - wifi_pwrseq: wifi-pwrseq { - compatible = "mmc-pwrseq-simple"; - reset-gpios = <&expgpio 1 GPIO_ACTIVE_LOW>; - }; - - sd_io_1v8_reg: sd_io_1v8_reg { - compatible = "regulator-gpio"; - regulator-name = "vdd-sd-io"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - regulator-boot-on; - regulator-always-on; - regulator-settling-time-us = <5000>; - gpios = <&expgpio 4 GPIO_ACTIVE_HIGH>; - states = <1800000 0x1 - 3300000 0x0>; - status = "okay"; - }; -}; - -&firmware { - expgpio: gpio { - compatible = "raspberrypi,firmware-gpio"; - gpio-controller; - #gpio-cells = <2>; - gpio-line-names = "BT_ON", - "WL_ON", - "PWR_LED_OFF", - "GLOBAL_RESET", - "VDD_SD_IO_SEL", - "CAM_GPIO", - "", - ""; - status = "okay"; - }; -}; - -&pwm1 { - pinctrl-names = "default"; - pinctrl-0 = <&pwm1_0_gpio40 &pwm1_1_gpio41>; - status = "okay"; -}; - -/* SDHCI is used to control the SDIO for wireless */ -&sdhci { - #address-cells = <1>; - #size-cells = <0>; - pinctrl-names = "default"; - pinctrl-0 = <&emmc_gpio34>; - bus-width = <4>; - non-removable; - mmc-pwrseq = <&wifi_pwrseq>; - status = "okay"; - - brcmf: wifi@1 { - reg = <1>; - compatible = "brcm,bcm4329-fmac"; - }; -}; - -/* EMMC2 is used to drive the SD card */ -&emmc2 { - vqmmc-supply = <&sd_io_1v8_reg>; - broken-cd; - status = "okay"; -}; - -&genet { - phy-handle = <&phy1>; - phy-mode = "rgmii-rxid"; - status = "okay"; -}; - -&genet_mdio { - phy1: ethernet-phy@1 { - /* No PHY interrupt */ - reg = <0x1>; - }; -}; - -/* uart0 communicates with the BT module */ -&uart0 { - pinctrl-names = "default"; - pinctrl-0 = <&uart0_ctsrts_gpio30 &uart0_gpio32>; - uart-has-rtscts; - status = "okay"; - - bluetooth { - compatible = "brcm,bcm43438-bt"; - max-speed = <2000000>; - shutdown-gpios = <&expgpio 0 GPIO_ACTIVE_HIGH>; - }; -}; - -/* uart1 is mapped to the pin header */ -&uart1 { - pinctrl-names = "default"; - pinctrl-0 = <&uart1_gpio14>; - status = "okay"; -}; - -&vchiq { - interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>; -}; |