diff options
Diffstat (limited to 'dts/src/arm/broadcom')
154 files changed, 20678 insertions, 0 deletions
diff --git a/dts/src/arm/broadcom/bcm-cygnus-clock.dtsi b/dts/src/arm/broadcom/bcm-cygnus-clock.dtsi new file mode 100644 index 0000000000..52f91a12a9 --- /dev/null +++ b/dts/src/arm/broadcom/bcm-cygnus-clock.dtsi @@ -0,0 +1,133 @@ +/* + * BSD LICENSE + * + * Copyright(c) 2014 Broadcom Corporation. All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * * Neither the name of Broadcom Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +clocks { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + osc: oscillator { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <25000000>; + }; + + /* Cygnus ARM PLL */ + armpll: armpll@19000000 { + #clock-cells = <0>; + compatible = "brcm,cygnus-armpll"; + clocks = <&osc>; + reg = <0x19000000 0x1000>; + }; + + /* peripheral clock for system timer */ + periph_clk: arm_periph_clk { + #clock-cells = <0>; + compatible = "fixed-factor-clock"; + clocks = <&armpll>; + clock-div = <2>; + clock-mult = <1>; + }; + + /* APB bus clock */ + apb_clk: apb_clk { + #clock-cells = <0>; + compatible = "fixed-factor-clock"; + clocks = <&armpll>; + clock-div = <4>; + clock-mult = <1>; + }; + + genpll: genpll@301d000 { + #clock-cells = <1>; + compatible = "brcm,cygnus-genpll"; + reg = <0x0301d000 0x2c>, <0x0301c020 0x4>; + clocks = <&osc>; + clock-output-names = "genpll", "axi21", "250mhz", "ihost_sys", + "enet_sw", "audio_125", "can"; + }; + + /* always 1/2 of the axi21 clock */ + axi41_clk: axi41_clk { + #clock-cells = <0>; + compatible = "fixed-factor-clock"; + clocks = <&genpll 1>; + clock-div = <2>; + clock-mult = <1>; + }; + + /* always 1/4 of the axi21 clock */ + axi81_clk: axi81_clk { + #clock-cells = <0>; + compatible = "fixed-factor-clock"; + clocks = <&genpll 1>; + clock-div = <4>; + clock-mult = <1>; + }; + + lcpll0: lcpll0@301d02c { + #clock-cells = <1>; + compatible = "brcm,cygnus-lcpll0"; + reg = <0x0301d02c 0x1c>, <0x0301c020 0x4>; + clocks = <&osc>; + clock-output-names = "lcpll0", "pcie_phy", "ddr_phy", "sdio", + "usb_phy", "smart_card", "ch5"; + }; + + mipipll: mipipll@180a9800 { + #clock-cells = <1>; + compatible = "brcm,cygnus-mipipll"; + reg = <0x180a9800 0x2c>, <0x0301c020 0x4>, <0x180aa024 0x4>; + clocks = <&osc>; + clock-output-names = "mipipll", "ch0_unused", "ch1_lcd", + "ch2_v3d", "ch3_unused", "ch4_unused", + "ch5_unused"; + }; + + asiu_clks: asiu_clks@301d048 { + #clock-cells = <1>; + compatible = "brcm,cygnus-asiu-clk"; + reg = <0x0301d048 0xc>, <0x180aa024 0x4>; + + clocks = <&osc>; + clock-output-names = "keypad", "adc/touch", "pwm"; + }; + + audiopll: audiopll@180aeb00 { + #clock-cells = <1>; + compatible = "brcm,cygnus-audiopll"; + reg = <0x180aeb00 0x68>; + clocks = <&osc>; + clock-output-names = "audiopll", "ch0_audio", + "ch1_audio", "ch2_audio"; + }; +}; diff --git a/dts/src/arm/broadcom/bcm-cygnus.dtsi b/dts/src/arm/broadcom/bcm-cygnus.dtsi new file mode 100644 index 0000000000..07ca0d993c --- /dev/null +++ b/dts/src/arm/broadcom/bcm-cygnus.dtsi @@ -0,0 +1,626 @@ +/* + * BSD LICENSE + * + * Copyright(c) 2014 Broadcom Corporation. All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * * Neither the name of Broadcom Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/clock/bcm-cygnus.h> + +/ { + #address-cells = <1>; + #size-cells = <1>; + compatible = "brcm,cygnus"; + model = "Broadcom Cygnus SoC"; + interrupt-parent = <&gic>; + + aliases { + ethernet0 = ð0; + }; + + memory@0 { + device_type = "memory"; + reg = <0 0>; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a9"; + next-level-cache = <&L2>; + reg = <0x0>; + }; + }; + + /include/ "bcm-cygnus-clock.dtsi" + + pmu { + compatible = "arm,cortex-a9-pmu"; + interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>; + }; + + core@19000000 { + compatible = "simple-bus"; + ranges = <0x00000000 0x19000000 0x1000000>; + #address-cells = <1>; + #size-cells = <1>; + + timer@20200 { + compatible = "arm,cortex-a9-global-timer"; + reg = <0x20200 0x100>; + interrupts = <GIC_PPI 11 IRQ_TYPE_EDGE_RISING>; + clocks = <&periph_clk>; + }; + + gic: interrupt-controller@21000 { + compatible = "arm,cortex-a9-gic"; + #interrupt-cells = <3>; + #address-cells = <0>; + interrupt-controller; + reg = <0x21000 0x1000>, + <0x20100 0x100>; + }; + + L2: cache-controller@22000 { + compatible = "arm,pl310-cache"; + reg = <0x22000 0x1000>; + cache-unified; + cache-level = <2>; + }; + }; + + axi { + compatible = "simple-bus"; + ranges; + #address-cells = <1>; + #size-cells = <1>; + + otp: otp@301c800 { + compatible = "brcm,ocotp"; + reg = <0x0301c800 0x2c>; + brcm,ocotp-size = <2048>; + status = "disabled"; + }; + + pcie_phy: pcie_phy@301d0a0 { + compatible = "brcm,cygnus-pcie-phy"; + reg = <0x0301d0a0 0x14>; + #address-cells = <1>; + #size-cells = <0>; + + pcie0_phy: pcie-phy@0 { + reg = <0>; + #phy-cells = <0>; + }; + + pcie1_phy: pcie-phy@1 { + reg = <1>; + #phy-cells = <0>; + }; + }; + + pinctrl: pinctrl@301d0c8 { + compatible = "brcm,cygnus-pinmux"; + reg = <0x0301d0c8 0x30>, + <0x0301d24c 0x2c>; + + spi_0: spi_0 { + function = "spi0"; + groups = "spi0_grp"; + }; + + spi_1: spi_1 { + function = "spi1"; + groups = "spi1_grp"; + }; + + spi_2: spi_2 { + function = "spi2"; + groups = "spi2_grp"; + }; + }; + + mailbox: mailbox@3024024 { + compatible = "brcm,iproc-mailbox"; + reg = <0x03024024 0x40>; + interrupts = <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>; + #interrupt-cells = <1>; + interrupt-controller; + #mbox-cells = <1>; + }; + + gpio_crmu: gpio@3024800 { + compatible = "brcm,cygnus-crmu-gpio"; + reg = <0x03024800 0x50>, + <0x03024008 0x18>; + ngpios = <6>; + #gpio-cells = <2>; + gpio-controller; + interrupt-controller; + #interrupt-cells = <2>; + interrupt-parent = <&mailbox>; + interrupts = <0>; + }; + + mdio: mdio@18002000 { + compatible = "brcm,iproc-mdio"; + reg = <0x18002000 0x8>; + #size-cells = <0>; + #address-cells = <1>; + status = "disabled"; + + gphy0: ethernet-phy@0 { + reg = <0>; + }; + + gphy1: ethernet-phy@1 { + reg = <1>; + }; + }; + + switch: switch@18007000 { + compatible = "brcm,bcm11360-srab", "brcm,cygnus-srab"; + reg = <0x18007000 0x1000>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + phy-handle = <&gphy0>; + phy-mode = "rgmii"; + }; + + port@1 { + reg = <1>; + phy-handle = <&gphy1>; + phy-mode = "rgmii"; + }; + + port@8 { + reg = <8>; + label = "cpu"; + ethernet = <ð0>; + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + }; + }; + + i2c0: i2c@18008000 { + compatible = "brcm,cygnus-iproc-i2c", "brcm,iproc-i2c"; + reg = <0x18008000 0x100>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>; + clock-frequency = <100000>; + status = "disabled"; + }; + + wdt0: wdt@18009000 { + compatible = "arm,sp805" , "arm,primecell"; + reg = <0x18009000 0x1000>; + interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&axi81_clk>, <&axi81_clk>; + clock-names = "wdog_clk", "apb_pclk"; + }; + + gpio_ccm: gpio@1800a000 { + compatible = "brcm,cygnus-ccm-gpio"; + reg = <0x1800a000 0x50>, + <0x0301d164 0x20>; + ngpios = <24>; + #gpio-cells = <2>; + gpio-controller; + interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + i2c1: i2c@1800b000 { + compatible = "brcm,cygnus-iproc-i2c", "brcm,iproc-i2c"; + reg = <0x1800b000 0x100>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>; + clock-frequency = <100000>; + status = "disabled"; + }; + + pcie0: pcie@18012000 { + compatible = "brcm,iproc-pcie"; + reg = <0x18012000 0x1000>; + + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &gic GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>; + + linux,pci-domain = <0>; + + bus-range = <0x00 0xff>; + + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + ranges = <0x81000000 0 0 0x28000000 0 0x00010000>, + <0x82000000 0 0x20000000 0x20000000 0 0x04000000>; + + phys = <&pcie0_phy>; + phy-names = "pcie-phy"; + + status = "disabled"; + + msi-parent = <&msi0>; + msi0: msi { + compatible = "brcm,iproc-msi"; + msi-controller; + interrupt-parent = <&gic>; + interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>; + }; + }; + + pcie1: pcie@18013000 { + compatible = "brcm,iproc-pcie"; + reg = <0x18013000 0x1000>; + + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &gic GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>; + + linux,pci-domain = <1>; + + bus-range = <0x00 0xff>; + + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + ranges = <0x81000000 0 0 0x48000000 0 0x00010000>, + <0x82000000 0 0x40000000 0x40000000 0 0x04000000>; + + phys = <&pcie1_phy>; + phy-names = "pcie-phy"; + + status = "disabled"; + + msi-parent = <&msi1>; + msi1: msi { + compatible = "brcm,iproc-msi"; + msi-controller; + interrupt-parent = <&gic>; + interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>; + }; + }; + + dma0: dma@18018000 { + compatible = "arm,pl330", "arm,primecell"; + reg = <0x18018000 0x1000>; + interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&apb_clk>; + clock-names = "apb_pclk"; + #dma-cells = <1>; + }; + + uart0: serial@18020000 { + compatible = "snps,dw-apb-uart"; + reg = <0x18020000 0x100>; + reg-shift = <2>; + reg-io-width = <4>; + interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&axi81_clk>; + clock-frequency = <100000000>; + status = "disabled"; + }; + + uart1: serial@18021000 { + compatible = "snps,dw-apb-uart"; + reg = <0x18021000 0x100>; + reg-shift = <2>; + reg-io-width = <4>; + interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&axi81_clk>; + clock-frequency = <100000000>; + status = "disabled"; + }; + + uart2: serial@18022000 { + compatible = "snps,dw-apb-uart"; + reg = <0x18022000 0x100>; + reg-shift = <2>; + reg-io-width = <4>; + interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&axi81_clk>; + clock-frequency = <100000000>; + status = "disabled"; + }; + + uart3: serial@18023000 { + compatible = "snps,dw-apb-uart"; + reg = <0x18023000 0x100>; + reg-shift = <2>; + reg-io-width = <4>; + interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&axi81_clk>; + clock-frequency = <100000000>; + status = "disabled"; + }; + + spi0: spi@18028000 { + compatible = "arm,pl022", "arm,primecell"; + reg = <0x18028000 0x1000>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-0 = <&spi_0>; + clocks = <&axi81_clk>, <&axi81_clk>; + clock-names = "sspclk", "apb_pclk"; + status = "disabled"; + }; + + spi1: spi@18029000 { + compatible = "arm,pl022", "arm,primecell"; + reg = <0x18029000 0x1000>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-0 = <&spi_1>; + clocks = <&axi81_clk>, <&axi81_clk>; + clock-names = "sspclk", "apb_pclk"; + status = "disabled"; + }; + + spi2: spi@1802a000 { + compatible = "arm,pl022", "arm,primecell"; + reg = <0x1802a000 0x1000>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-0 = <&spi_2>; + clocks = <&axi81_clk>, <&axi81_clk>; + clock-names = "sspclk", "apb_pclk"; + status = "disabled"; + }; + + rng: rng@18032000 { + compatible = "brcm,iproc-rng200"; + reg = <0x18032000 0x28>; + }; + + sdhci0: sdhci@18041000 { + compatible = "brcm,sdhci-iproc-cygnus"; + reg = <0x18041000 0x100>; + interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&lcpll0 BCM_CYGNUS_LCPLL0_SDIO_CLK>; + bus-width = <4>; + sdhci,auto-cmd12; + status = "disabled"; + }; + + eth0: ethernet@18042000 { + compatible = "brcm,amac"; + reg = <0x18042000 0x1000>, + <0x18110000 0x1000>; + reg-names = "amac_base", "idm_base"; + interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + sdhci1: sdhci@18043000 { + compatible = "brcm,sdhci-iproc-cygnus"; + reg = <0x18043000 0x100>; + interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&lcpll0 BCM_CYGNUS_LCPLL0_SDIO_CLK>; + bus-width = <4>; + sdhci,auto-cmd12; + status = "disabled"; + }; + + nand_controller: nand-controller@18046000 { + compatible = "brcm,nand-iproc", "brcm,brcmnand-v6.1"; + reg = <0x18046000 0x600>, <0xf8105408 0x600>, + <0x18046f00 0x20>; + reg-names = "nand", "iproc-idm", "iproc-ext"; + interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>; + + #address-cells = <1>; + #size-cells = <0>; + + brcm,nand-has-wp; + }; + + ehci0: usb@18048000 { + compatible = "generic-ehci"; + reg = <0x18048000 0x100>; + interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + ohci0: usb@18048800 { + compatible = "generic-ohci"; + reg = <0x18048800 0x100>; + interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + clcd: clcd@180a0000 { + compatible = "arm,pl111", "arm,primecell"; + reg = <0x180a0000 0x1000>; + interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "combined"; + clocks = <&axi41_clk>, <&apb_clk>; + clock-names = "clcdclk", "apb_pclk"; + status = "disabled"; + }; + + v3d: v3d@180a2000 { + compatible = "brcm,cygnus-v3d"; + reg = <0x180a2000 0x1000>; + clocks = <&mipipll BCM_CYGNUS_MIPIPLL_CH2_V3D>; + clock-names = "v3d_clk"; + interrupts = <GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + vc4: gpu { + compatible = "brcm,cygnus-vc4"; + }; + + gpio_asiu: gpio@180a5000 { + compatible = "brcm,cygnus-asiu-gpio"; + reg = <0x180a5000 0x668>; + ngpios = <146>; + #gpio-cells = <2>; + gpio-controller; + + interrupt-controller; + #interrupt-cells = <2>; + interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>; + gpio-ranges = <&pinctrl 0 42 1>, + <&pinctrl 1 44 3>, + <&pinctrl 4 48 1>, + <&pinctrl 5 50 3>, + <&pinctrl 8 126 1>, + <&pinctrl 9 155 1>, + <&pinctrl 10 152 1>, + <&pinctrl 11 154 1>, + <&pinctrl 12 153 1>, + <&pinctrl 13 127 3>, + <&pinctrl 16 140 1>, + <&pinctrl 17 145 7>, + <&pinctrl 24 130 10>, + <&pinctrl 34 141 4>, + <&pinctrl 38 54 1>, + <&pinctrl 39 56 3>, + <&pinctrl 42 60 3>, + <&pinctrl 45 64 3>, + <&pinctrl 48 68 2>, + <&pinctrl 50 84 6>, + <&pinctrl 56 94 6>, + <&pinctrl 62 72 1>, + <&pinctrl 63 70 1>, + <&pinctrl 64 80 1>, + <&pinctrl 65 74 3>, + <&pinctrl 68 78 1>, + <&pinctrl 69 82 1>, + <&pinctrl 70 156 17>, + <&pinctrl 87 104 12>, + <&pinctrl 99 102 2>, + <&pinctrl 101 90 4>, + <&pinctrl 105 116 6>, + <&pinctrl 111 100 2>, + <&pinctrl 113 122 4>, + <&pinctrl 123 11 1>, + <&pinctrl 124 38 4>, + <&pinctrl 128 43 1>, + <&pinctrl 129 47 1>, + <&pinctrl 130 49 1>, + <&pinctrl 131 53 1>, + <&pinctrl 132 55 1>, + <&pinctrl 133 59 1>, + <&pinctrl 134 63 1>, + <&pinctrl 135 67 1>, + <&pinctrl 136 71 1>, + <&pinctrl 137 73 1>, + <&pinctrl 138 77 1>, + <&pinctrl 139 79 1>, + <&pinctrl 140 81 1>, + <&pinctrl 141 83 1>, + <&pinctrl 142 10 1>; + }; + + ts_adc_syscon: ts_adc_syscon@180a6000 { + compatible = "brcm,iproc-ts-adc-syscon", "syscon"; + reg = <0x180a6000 0xc30>; + }; + + touchscreen: touchscreen@180a6000 { + compatible = "brcm,iproc-touchscreen"; + #address-cells = <1>; + #size-cells = <1>; + ts_syscon = <&ts_adc_syscon>; + clocks = <&asiu_clks BCM_CYGNUS_ASIU_ADC_CLK>; + clock-names = "tsc_clk"; + interrupts = <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + adc: adc@180a6000 { + compatible = "brcm,iproc-static-adc"; + #io-channel-cells = <1>; + adc-syscon = <&ts_adc_syscon>; + clocks = <&asiu_clks BCM_CYGNUS_ASIU_ADC_CLK>; + clock-names = "tsc_clk"; + interrupts = <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + pwm: pwm@180aa500 { + compatible = "brcm,kona-pwm"; + reg = <0x180aa500 0xc4>; + #pwm-cells = <3>; + clocks = <&asiu_clks BCM_CYGNUS_ASIU_PWM_CLK>; + status = "disabled"; + }; + + keypad: keypad@180ac000 { + compatible = "brcm,bcm-keypad"; + reg = <0x180ac000 0x14c>; + interrupts = <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&asiu_clks BCM_CYGNUS_ASIU_KEYPAD_CLK>; + clock-names = "peri_clk"; + clock-frequency = <31250>; + pull-up-enabled; + col-debounce-filter-period = <0>; + status-debounce-filter-period = <0>; + row-output-enabled; + status = "disabled"; + }; + }; +}; diff --git a/dts/src/arm/broadcom/bcm-hr2.dtsi b/dts/src/arm/broadcom/bcm-hr2.dtsi new file mode 100644 index 0000000000..75545b10ef --- /dev/null +++ b/dts/src/arm/broadcom/bcm-hr2.dtsi @@ -0,0 +1,369 @@ +/* + * BSD LICENSE + * + * Copyright(c) 2017 Broadcom. All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * * Neither the name of Broadcom Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/interrupt-controller/irq.h> + +/ { + compatible = "brcm,hr2"; + model = "Broadcom Hurricane 2 SoC"; + interrupt-parent = <&gic>; + #address-cells = <1>; + #size-cells = <1>; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a9"; + next-level-cache = <&L2>; + reg = <0x0>; + }; + }; + + pmu { + compatible = "arm,cortex-a9-pmu"; + interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>; + interrupt-affinity = <&cpu0>; + }; + + mpcore@19000000 { + compatible = "simple-bus"; + ranges = <0x00000000 0x19000000 0x00023000>; + #address-cells = <1>; + #size-cells = <1>; + + a9pll: arm_clk@0 { + #clock-cells = <0>; + compatible = "brcm,hr2-armpll"; + clocks = <&osc>; + reg = <0x0 0x1000>; + }; + + timer@20200 { + compatible = "arm,cortex-a9-global-timer"; + reg = <0x20200 0x100>; + interrupts = <GIC_PPI 11 IRQ_TYPE_EDGE_RISING>; + clocks = <&periph_clk>; + }; + + twd-timer@20600 { + compatible = "arm,cortex-a9-twd-timer"; + reg = <0x20600 0x20>; + interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(1) | + IRQ_TYPE_EDGE_RISING)>; + clocks = <&periph_clk>; + }; + + twd-watchdog@20620 { + compatible = "arm,cortex-a9-twd-wdt"; + reg = <0x20620 0x20>; + interrupts = <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(1) | + IRQ_TYPE_EDGE_RISING)>; + clocks = <&periph_clk>; + }; + + gic: interrupt-controller@21000 { + compatible = "arm,cortex-a9-gic"; + #interrupt-cells = <3>; + #address-cells = <0>; + interrupt-controller; + reg = <0x21000 0x1000>, + <0x20100 0x100>; + }; + + L2: cache-controller@22000 { + compatible = "arm,pl310-cache"; + reg = <0x22000 0x1000>; + cache-unified; + cache-level = <2>; + }; + }; + + clocks { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + osc: oscillator { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <25000000>; + }; + + periph_clk: periph_clk { + #clock-cells = <0>; + compatible = "fixed-factor-clock"; + clocks = <&a9pll>; + clock-div = <2>; + clock-mult = <1>; + }; + }; + + axi@18000000 { + compatible = "simple-bus"; + ranges = <0x00000000 0x18000000 0x0011c40c>; + #address-cells = <1>; + #size-cells = <1>; + + uart0: serial@300 { + compatible = "ns16550a"; + reg = <0x0300 0x100>; + interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&osc>; + status = "disabled"; + }; + + uart1: serial@400 { + compatible = "ns16550a"; + reg = <0x0400 0x100>; + interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&osc>; + status = "disabled"; + }; + + dma@20000 { + compatible = "arm,pl330", "arm,primecell"; + reg = <0x20000 0x1000>; + interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>; + #dma-cells = <1>; + status = "disabled"; + }; + + amac0: ethernet@22000 { + compatible = "brcm,nsp-amac"; + reg = <0x22000 0x1000>, + <0x110000 0x1000>; + reg-names = "amac_base", "idm_base"; + interrupts = <GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + nand_controller: nand-controller@26000 { + compatible = "brcm,nand-iproc", "brcm,brcmnand-v6.1"; + reg = <0x26000 0x600>, + <0x11b408 0x600>, + <0x026f00 0x20>; + reg-names = "nand", "iproc-idm", "iproc-ext"; + interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>; + + #address-cells = <1>; + #size-cells = <0>; + + brcm,nand-has-wp; + }; + + gpiob: gpio@30000 { + compatible = "brcm,iproc-hr2-gpio", "brcm,iproc-gpio"; + reg = <0x30000 0x50>; + #gpio-cells = <2>; + gpio-controller; + ngpios = <4>; + interrupt-controller; + #interrupt-cells = <2>; + interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>; + }; + + pwm: pwm@31000 { + compatible = "brcm,iproc-pwm"; + reg = <0x31000 0x28>; + clocks = <&osc>; + #pwm-cells = <3>; + status = "disabled"; + }; + + rng: rng@33000 { + compatible = "brcm,bcm-nsp-rng"; + reg = <0x33000 0x14>; + }; + + qspi: spi@27200 { + compatible = "brcm,spi-nsp-qspi", "brcm,spi-bcm-qspi"; + reg = <0x027200 0x184>, + <0x027000 0x124>, + <0x11c408 0x004>, + <0x0273a0 0x01c>; + reg-names = "mspi", "bspi", "intr_regs", + "intr_status_reg"; + interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "spi_lr_fullness_reached", + "spi_lr_session_aborted", + "spi_lr_impatient", + "spi_lr_session_done", + "spi_lr_overhead", + "mspi_done", + "mspi_halted"; + num-cs = <2>; + #address-cells = <1>; + #size-cells = <0>; + + /* partitions defined in board DTS */ + }; + + ccbtimer0: timer@34000 { + compatible = "arm,sp804"; + reg = <0x34000 0x1000>; + interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>; + }; + + ccbtimer1: timer@35000 { + compatible = "arm,sp804"; + reg = <0x35000 0x1000>; + interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>; + }; + + i2c0: i2c@38000 { + compatible = "brcm,iproc-i2c"; + reg = <0x38000 0x50>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>; + clock-frequency = <100000>; + }; + + watchdog: watchdog@39000 { + compatible = "arm,sp805", "arm,primecell"; + reg = <0x39000 0x1000>; + interrupts = <GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH>; + }; + + i2c1: i2c@3b000 { + compatible = "brcm,iproc-i2c"; + reg = <0x3b000 0x50>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>; + clock-frequency = <100000>; + }; + }; + + pflash: nor@20000000 { + compatible = "cfi-flash", "jedec-flash"; + reg = <0x20000000 0x04000000>; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + + /* partitions defined in board DTS */ + }; + + pcie0: pcie@18012000 { + compatible = "brcm,iproc-pcie"; + reg = <0x18012000 0x1000>; + + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &gic GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>; + + linux,pci-domain = <0>; + + bus-range = <0x00 0xff>; + + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + + /* Note: The HW does not support I/O resources. So, + * only the memory resource range is being specified. + */ + ranges = <0x82000000 0 0x08000000 0x08000000 0 0x8000000>; + + status = "disabled"; + + msi-parent = <&msi0>; + msi0: msi { + compatible = "brcm,iproc-msi"; + msi-controller; + interrupt-parent = <&gic>; + interrupts = <GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>; + brcm,pcie-msi-inten; + }; + }; + + pcie1: pcie@18013000 { + compatible = "brcm,iproc-pcie"; + reg = <0x18013000 0x1000>; + + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &gic GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>; + + linux,pci-domain = <1>; + + bus-range = <0x00 0xff>; + + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + + /* Note: The HW does not support I/O resources. So, + * only the memory resource range is being specified. + */ + ranges = <0x82000000 0 0x40000000 0x40000000 0 0x8000000>; + + status = "disabled"; + + msi-parent = <&msi1>; + msi1: msi { + compatible = "brcm,iproc-msi"; + msi-controller; + interrupt-parent = <&gic>; + interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>; + brcm,pcie-msi-inten; + }; + }; +}; diff --git a/dts/src/arm/broadcom/bcm-ns.dtsi b/dts/src/arm/broadcom/bcm-ns.dtsi new file mode 100644 index 0000000000..d0d5f7e52a --- /dev/null +++ b/dts/src/arm/broadcom/bcm-ns.dtsi @@ -0,0 +1,516 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Copyright 2013-2014 Hauke Mehrtens <hauke@hauke-m.de> + */ + +#include <dt-bindings/clock/bcm-nsp.h> +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> + +/ { + interrupt-parent = <&gic>; + #address-cells = <1>; + #size-cells = <1>; + + pmu { + compatible = "arm,cortex-a9-pmu"; + interrupts = + <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>; + }; + + chipcommon-a-bus@18000000 { + compatible = "simple-bus"; + ranges = <0x00000000 0x18000000 0x00001000>; + #address-cells = <1>; + #size-cells = <1>; + + uart0: serial@300 { + compatible = "ns16550"; + reg = <0x0300 0x100>; + interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&iprocslow>; + status = "disabled"; + }; + + uart1: serial@400 { + compatible = "ns16550"; + reg = <0x0400 0x100>; + interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&iprocslow>; + pinctrl-names = "default"; + pinctrl-0 = <&pinmux_uart1>; + status = "disabled"; + }; + }; + + mpcore-bus@19000000 { + compatible = "simple-bus"; + ranges = <0x00000000 0x19000000 0x00023000>; + #address-cells = <1>; + #size-cells = <1>; + + scu@20000 { + compatible = "arm,cortex-a9-scu"; + reg = <0x20000 0x100>; + }; + + timer@20200 { + compatible = "arm,cortex-a9-global-timer"; + reg = <0x20200 0x100>; + interrupts = <GIC_PPI 11 IRQ_TYPE_EDGE_RISING>; + clocks = <&periph_clk>; + }; + + timer@20600 { + compatible = "arm,cortex-a9-twd-timer"; + reg = <0x20600 0x20>; + interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | + IRQ_TYPE_EDGE_RISING)>; + clocks = <&periph_clk>; + }; + + gic: interrupt-controller@21000 { + compatible = "arm,cortex-a9-gic"; + #interrupt-cells = <3>; + #address-cells = <0>; + interrupt-controller; + reg = <0x21000 0x1000>, + <0x20100 0x100>; + }; + + L2: cache-controller@22000 { + compatible = "arm,pl310-cache"; + reg = <0x22000 0x1000>; + cache-unified; + arm,shared-override; + prefetch-data = <1>; + prefetch-instr = <1>; + cache-level = <2>; + }; + }; + + axi@18000000 { + compatible = "brcm,bus-axi"; + reg = <0x18000000 0x1000>; + ranges = <0x00000000 0x18000000 0x00100000>; + #address-cells = <1>; + #size-cells = <1>; + + #interrupt-cells = <1>; + interrupt-map-mask = <0x000fffff 0xffff>; + interrupt-map = + /* ChipCommon */ + <0x00000000 0 &gic GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>, + + /* Switch Register Access Block */ + <0x00007000 0 &gic GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>, + <0x00007000 1 &gic GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>, + <0x00007000 2 &gic GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>, + <0x00007000 3 &gic GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>, + <0x00007000 4 &gic GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>, + <0x00007000 5 &gic GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>, + <0x00007000 6 &gic GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>, + <0x00007000 7 &gic GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>, + <0x00007000 8 &gic GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>, + <0x00007000 9 &gic GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>, + <0x00007000 10 &gic GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>, + <0x00007000 11 &gic GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>, + <0x00007000 12 &gic GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>, + + /* PCIe Controller 0 */ + <0x00012000 0 &gic GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>, + <0x00012000 1 &gic GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>, + <0x00012000 2 &gic GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>, + <0x00012000 3 &gic GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>, + <0x00012000 4 &gic GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>, + <0x00012000 5 &gic GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>, + + /* PCIe Controller 1 */ + <0x00013000 0 &gic GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>, + <0x00013000 1 &gic GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>, + <0x00013000 2 &gic GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>, + <0x00013000 3 &gic GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>, + <0x00013000 4 &gic GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>, + <0x00013000 5 &gic GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>, + + /* PCIe Controller 2 */ + <0x00014000 0 &gic GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>, + <0x00014000 1 &gic GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>, + <0x00014000 2 &gic GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>, + <0x00014000 3 &gic GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>, + <0x00014000 4 &gic GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>, + <0x00014000 5 &gic GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>, + + /* USB 2.0 Controller */ + <0x00021000 0 &gic GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>, + + /* USB 3.0 Controller */ + <0x00023000 0 &gic GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>, + + /* Ethernet Controller 0 */ + <0x00024000 0 &gic GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>, + + /* Ethernet Controller 1 */ + <0x00025000 0 &gic GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>, + + /* Ethernet Controller 2 */ + <0x00026000 0 &gic GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>, + + /* Ethernet Controller 3 */ + <0x00027000 0 &gic GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>, + + /* NAND Controller */ + <0x00028000 0 &gic GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>, + <0x00028000 1 &gic GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>, + <0x00028000 2 &gic GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>, + <0x00028000 3 &gic GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>, + <0x00028000 4 &gic GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>, + <0x00028000 5 &gic GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>, + <0x00028000 6 &gic GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>, + <0x00028000 7 &gic GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>; + + chipcommon: chipcommon@0 { + reg = <0x00000000 0x1000>; + + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + pcie0: pcie@12000 { + reg = <0x00012000 0x1000>; + + #address-cells = <3>; + #size-cells = <2>; + }; + + pcie1: pcie@13000 { + reg = <0x00013000 0x1000>; + + #address-cells = <3>; + #size-cells = <2>; + }; + + pcie2: pcie@14000 { + reg = <0x00014000 0x1000>; + + #address-cells = <3>; + #size-cells = <2>; + }; + + usb2: usb2@21000 { + reg = <0x00021000 0x1000>; + + #address-cells = <1>; + #size-cells = <1>; + ranges; + + interrupt-parent = <&gic>; + + ehci: usb@21000 { + compatible = "generic-ehci"; + reg = <0x00021000 0x1000>; + interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>; + phys = <&usb2_phy>; + + #address-cells = <1>; + #size-cells = <0>; + + ehci_port1: port@1 { + reg = <1>; + #trigger-source-cells = <0>; + }; + + ehci_port2: port@2 { + reg = <2>; + #trigger-source-cells = <0>; + }; + }; + + ohci: usb@22000 { + compatible = "generic-ohci"; + reg = <0x00022000 0x1000>; + interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>; + + #address-cells = <1>; + #size-cells = <0>; + + ohci_port1: port@1 { + reg = <1>; + #trigger-source-cells = <0>; + }; + + ohci_port2: port@2 { + reg = <2>; + #trigger-source-cells = <0>; + }; + }; + }; + + usb3: usb3@23000 { + reg = <0x00023000 0x1000>; + + #address-cells = <1>; + #size-cells = <1>; + ranges; + + interrupt-parent = <&gic>; + + xhci: usb@23000 { + compatible = "generic-xhci"; + reg = <0x00023000 0x1000>; + interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>; + phys = <&usb3_phy>; + phy-names = "usb"; + + #address-cells = <1>; + #size-cells = <0>; + + xhci_port1: port@1 { + reg = <1>; + #trigger-source-cells = <0>; + }; + }; + }; + + gmac0: ethernet@24000 { + reg = <0x24000 0x800>; + phy-mode = "internal"; + + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + + gmac1: ethernet@25000 { + reg = <0x25000 0x800>; + phy-mode = "internal"; + + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + + gmac2: ethernet@26000 { + reg = <0x26000 0x800>; + phy-mode = "internal"; + + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + + gmac3: ethernet@27000 { + reg = <0x27000 0x800>; + }; + }; + + pwm: pwm@18002000 { + compatible = "brcm,iproc-pwm"; + reg = <0x18002000 0x28>; + clocks = <&osc>; + #pwm-cells = <3>; + status = "disabled"; + }; + + mdio: mdio@18003000 { + compatible = "brcm,iproc-mdio"; + reg = <0x18003000 0x8>; + #size-cells = <0>; + #address-cells = <1>; + }; + + mdio-mux@18003000 { + compatible = "mdio-mux-mmioreg", "mdio-mux"; + mdio-parent-bus = <&mdio>; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x18003000 0x4>; + mux-mask = <0x200>; + + mdio@0 { + reg = <0x0>; + #address-cells = <1>; + #size-cells = <0>; + + usb3_phy: usb3-phy@10 { + compatible = "brcm,ns-ax-usb3-phy"; + reg = <0x10>; + usb3-dmp-syscon = <&usb3_dmp>; + #phy-cells = <0>; + status = "disabled"; + }; + }; + }; + + rng: rng@18004000 { + compatible = "brcm,bcm5301x-rng"; + reg = <0x18004000 0x14>; + }; + + srab: ethernet-switch@18007000 { + compatible = "brcm,bcm53011-srab", "brcm,bcm5301x-srab"; + reg = <0x18007000 0x1000>; + + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + }; + + port@1 { + reg = <1>; + }; + + port@2 { + reg = <2>; + }; + + port@3 { + reg = <3>; + }; + + port@4 { + reg = <4>; + }; + + port@5 { + reg = <5>; + ethernet = <&gmac0>; + }; + + port@7 { + reg = <7>; + ethernet = <&gmac1>; + }; + + port@8 { + reg = <8>; + ethernet = <&gmac2>; + + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + }; + }; + + uart2: serial@18008000 { + compatible = "ns16550a"; + reg = <0x18008000 0x20>; + clocks = <&iprocslow>; + interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>; + reg-shift = <2>; + status = "disabled"; + }; + + dmu-bus@1800c000 { + compatible = "simple-bus"; + ranges = <0 0x1800c000 0x1000>; + #address-cells = <1>; + #size-cells = <1>; + + cru-bus@100 { + compatible = "brcm,ns-cru", "simple-mfd"; + reg = <0x100 0x1a4>; + ranges; + #address-cells = <1>; + #size-cells = <1>; + + usb2_phy: phy@164 { + compatible = "brcm,ns-usb2-phy"; + reg = <0x164 0x4>; + brcm,syscon-clkset = <&cru_clkset>; + clocks = <&genpll BCM_NSP_GENPLL_USB_PHY_REF_CLK>; + clock-names = "phy-ref-clk"; + #phy-cells = <0>; + }; + + cru_clkset: syscon@180 { + compatible = "brcm,cru-clkset", "syscon"; + reg = <0x180 0x4>; + }; + + pinctrl: pinctrl@1c0 { + compatible = "brcm,bcm4708-pinmux"; + reg = <0x1c0 0x24>; + reg-names = "cru_gpio_control"; + + spi-pins { + groups = "spi_grp"; + function = "spi"; + }; + + pinmux_i2c: i2c-pins { + groups = "i2c_grp"; + function = "i2c"; + }; + + pinmux_pwm: pwm-pins { + groups = "pwm0_grp", "pwm1_grp", + "pwm2_grp", "pwm3_grp"; + function = "pwm"; + }; + + pinmux_uart1: uart1-pins { + groups = "uart1_grp"; + function = "uart1"; + }; + }; + + thermal: thermal@2c0 { + compatible = "brcm,ns-thermal"; + reg = <0x2c0 0x10>; + #thermal-sensor-cells = <0>; + }; + }; + }; + + nand_controller: nand-controller@18028000 { + compatible = "brcm,nand-iproc", "brcm,brcmnand-v6.1", "brcm,brcmnand"; + reg = <0x18028000 0x600>, <0x1811a408 0x600>, <0x18028f00 0x20>; + reg-names = "nand", "iproc-idm", "iproc-ext"; + interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>; + + #address-cells = <1>; + #size-cells = <0>; + + brcm,nand-has-wp; + }; + + usb3_dmp: syscon@18105000 { + reg = <0x18105000 0x1000>; + }; + + thermal-zones { + cpu_thermal: cpu-thermal { + polling-delay-passive = <0>; + polling-delay = <1000>; + coefficients = <(-556) 418000>; + thermal-sensors = <&thermal>; + + trips { + cpu-crit { + temperature = <125000>; + hysteresis = <0>; + type = "critical"; + }; + }; + + cooling-maps { + }; + }; + }; +}; diff --git a/dts/src/arm/broadcom/bcm-nsp-ax.dtsi b/dts/src/arm/broadcom/bcm-nsp-ax.dtsi new file mode 100644 index 0000000000..f2e941dbab --- /dev/null +++ b/dts/src/arm/broadcom/bcm-nsp-ax.dtsi @@ -0,0 +1,70 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Broadcom Northstar Plus Ax stepping-specific bindings. + * Notable differences from B0+ are the secondary-boot-reg and + * lack of DMA coherency. + */ + +&cpu1 { + secondary-boot-reg = <0xffff042c>; +}; + +&dma { + /delete-property/ dma-coherent; +}; + +&sdio { + /delete-property/ dma-coherent; +}; + +&amac0 { + /delete-property/ dma-coherent; +}; + +&amac1 { + /delete-property/ dma-coherent; +}; + +&amac2 { + /delete-property/ dma-coherent; +}; + +&ehci0 { + /delete-property/ dma-coherent; +}; + +&mailbox { + /delete-property/ dma-coherent; +}; + +&xhci { + /delete-property/ dma-coherent; +}; + +&ehci0 { + /delete-property/ dma-coherent; +}; + +&ohci0 { + /delete-property/ dma-coherent; +}; + +&i2c0 { + /delete-property/ dma-coherent; +}; + +&sata { + /delete-property/ dma-coherent; +}; + +&pcie0 { + /delete-property/ dma-coherent; +}; + +&pcie1 { + /delete-property/ dma-coherent; +}; + +&pcie2 { + /delete-property/ dma-coherent; +}; diff --git a/dts/src/arm/broadcom/bcm-nsp.dtsi b/dts/src/arm/broadcom/bcm-nsp.dtsi new file mode 100644 index 0000000000..6a4482c931 --- /dev/null +++ b/dts/src/arm/broadcom/bcm-nsp.dtsi @@ -0,0 +1,697 @@ +/* + * BSD LICENSE + * + * Copyright(c) 2015 Broadcom Corporation. All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * * Neither the name of Broadcom Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/clock/bcm-nsp.h> + +/ { + #address-cells = <1>; + #size-cells = <1>; + compatible = "brcm,nsp"; + model = "Broadcom Northstar Plus SoC"; + interrupt-parent = <&gic>; + + aliases { + serial0 = &uart0; + serial1 = &uart1; + ethernet0 = &amac0; + ethernet1 = &amac1; + ethernet2 = &amac2; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a9"; + next-level-cache = <&L2>; + reg = <0x0>; + }; + + cpu1: cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a9"; + next-level-cache = <&L2>; + enable-method = "brcm,bcm-nsp-smp"; + secondary-boot-reg = <0xffff0fec>; + reg = <0x1>; + }; + }; + + pmu { + compatible = "arm,cortex-a9-pmu"; + interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>; + interrupt-affinity = <&cpu0>, <&cpu1>; + }; + + mpcore-bus@19000000 { + compatible = "simple-bus"; + ranges = <0x00000000 0x19000000 0x00023000>; + #address-cells = <1>; + #size-cells = <1>; + + a9pll: arm_clk@0 { + #clock-cells = <0>; + compatible = "brcm,nsp-armpll"; + clocks = <&osc>; + reg = <0x00000 0x1000>; + }; + + timer@20200 { + compatible = "arm,cortex-a9-global-timer"; + reg = <0x20200 0x100>; + interrupts = <GIC_PPI 11 IRQ_TYPE_EDGE_RISING>; + clocks = <&periph_clk>; + }; + + twd-timer@20600 { + compatible = "arm,cortex-a9-twd-timer"; + reg = <0x20600 0x20>; + interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | + IRQ_TYPE_EDGE_RISING)>; + clocks = <&periph_clk>; + }; + + twd-watchdog@20620 { + compatible = "arm,cortex-a9-twd-wdt"; + reg = <0x20620 0x20>; + interrupts = <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | + IRQ_TYPE_LEVEL_HIGH)>; + clocks = <&periph_clk>; + }; + + gic: interrupt-controller@21000 { + compatible = "arm,cortex-a9-gic"; + #interrupt-cells = <3>; + #address-cells = <0>; + interrupt-controller; + reg = <0x21000 0x1000>, + <0x20100 0x100>; + }; + + L2: cache-controller@22000 { + compatible = "arm,pl310-cache"; + reg = <0x22000 0x1000>; + cache-unified; + cache-level = <2>; + }; + }; + + clocks { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + osc: oscillator { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <25000000>; + }; + + iprocmed: iprocmed { + #clock-cells = <0>; + compatible = "fixed-factor-clock"; + clocks = <&genpll BCM_NSP_GENPLL_IPROCFAST_CLK>; + clock-div = <2>; + clock-mult = <1>; + }; + + iprocslow: iprocslow { + #clock-cells = <0>; + compatible = "fixed-factor-clock"; + clocks = <&genpll BCM_NSP_GENPLL_IPROCFAST_CLK>; + clock-div = <4>; + clock-mult = <1>; + }; + + periph_clk: periph_clk { + #clock-cells = <0>; + compatible = "fixed-factor-clock"; + clocks = <&a9pll>; + clock-div = <2>; + clock-mult = <1>; + }; + }; + + axi: axi@18000000 { + compatible = "simple-bus"; + ranges = <0x00000000 0x18000000 0x0011c40c>; + #address-cells = <1>; + #size-cells = <1>; + + gpioa: gpio@20 { + compatible = "brcm,nsp-gpio-a"; + reg = <0x0020 0x70>, + <0x3f1c4 0x1c>; + #gpio-cells = <2>; + gpio-controller; + ngpios = <32>; + interrupt-controller; + #interrupt-cells = <2>; + interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>; + gpio-ranges = <&pinctrl 0 0 32>; + }; + + uart0: serial@300 { + compatible = "ns16550a"; + reg = <0x0300 0x100>; + interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&osc>; + status = "disabled"; + }; + + uart1: serial@400 { + compatible = "ns16550a"; + reg = <0x0400 0x100>; + interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&osc>; + status = "disabled"; + }; + + dma: dma@20000 { + compatible = "arm,pl330", "arm,primecell"; + reg = <0x20000 0x1000>; + interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&iprocslow>; + clock-names = "apb_pclk"; + #dma-cells = <1>; + dma-coherent; + status = "disabled"; + }; + + sdio: mmc@21000 { + compatible = "brcm,sdhci-iproc-cygnus"; + reg = <0x21000 0x100>; + interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>; + sdhci,auto-cmd12; + clocks = <&lcpll0 BCM_NSP_LCPLL0_SDIO_CLK>; + dma-coherent; + status = "disabled"; + }; + + amac0: ethernet@22000 { + compatible = "brcm,nsp-amac"; + reg = <0x022000 0x1000>, + <0x110000 0x1000>; + reg-names = "amac_base", "idm_base"; + interrupts = <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>; + dma-coherent; + status = "disabled"; + }; + + amac1: ethernet@23000 { + compatible = "brcm,nsp-amac"; + reg = <0x023000 0x1000>, + <0x111000 0x1000>; + reg-names = "amac_base", "idm_base"; + interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>; + dma-coherent; + status = "disabled"; + }; + + amac2: ethernet@24000 { + compatible = "brcm,nsp-amac"; + reg = <0x024000 0x1000>, + <0x112000 0x1000>; + reg-names = "amac_base", "idm_base"; + interrupts = <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>; + dma-coherent; + status = "disabled"; + }; + + mailbox: mailbox@25c00 { + compatible = "brcm,iproc-fa2-mbox"; + reg = <0x25c00 0x400>; + interrupts = <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>; + #mbox-cells = <1>; + brcm,rx-status-len = <32>; + brcm,use-bcm-hdr; + dma-coherent; + }; + + nand_controller: nand-controller@26000 { + compatible = "brcm,nand-iproc", "brcm,brcmnand-v6.1"; + reg = <0x026000 0x600>, + <0x11b408 0x600>, + <0x026f00 0x20>; + reg-names = "nand", "iproc-idm", "iproc-ext"; + interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>; + + #address-cells = <1>; + #size-cells = <0>; + + brcm,nand-has-wp; + }; + + qspi: spi@27200 { + compatible = "brcm,spi-nsp-qspi", "brcm,spi-bcm-qspi"; + reg = <0x027200 0x184>, + <0x027000 0x124>, + <0x11c408 0x004>, + <0x0273a0 0x01c>; + reg-names = "mspi", "bspi", "intr_regs", + "intr_status_reg"; + interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "spi_lr_fullness_reached", + "spi_lr_session_aborted", + "spi_lr_impatient", + "spi_lr_session_done", + "spi_lr_overhead", + "mspi_done", + "mspi_halted"; + clocks = <&iprocmed>; + clock-names = "iprocmed"; + num-cs = <2>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + xhci: usb@29000 { + compatible = "generic-xhci"; + reg = <0x29000 0x1000>; + interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>; + phys = <&usb3_phy>; + phy-names = "usb3-phy"; + dma-coherent; + status = "disabled"; + }; + + ehci0: usb@2a000 { + compatible = "generic-ehci"; + reg = <0x2a000 0x100>; + interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>; + dma-coherent; + status = "disabled"; + }; + + ohci0: usb@2b000 { + compatible = "generic-ohci"; + reg = <0x2b000 0x100>; + interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>; + dma-coherent; + status = "disabled"; + }; + + crypto@2f000 { + compatible = "brcm,spum-nsp-crypto"; + reg = <0x2f000 0x900>; + mboxes = <&mailbox 0>; + }; + + gpiob: gpio@30000 { + compatible = "brcm,iproc-nsp-gpio", "brcm,iproc-gpio"; + reg = <0x30000 0x50>; + #gpio-cells = <2>; + gpio-controller; + ngpios = <4>; + interrupt-controller; + #interrupt-cells = <2>; + interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>; + }; + + pwm: pwm@31000 { + compatible = "brcm,iproc-pwm"; + reg = <0x31000 0x28>; + clocks = <&osc>; + #pwm-cells = <3>; + status = "disabled"; + }; + + mdio: mdio@32000 { + compatible = "brcm,iproc-mdio"; + reg = <0x32000 0x8>; + #size-cells = <0>; + #address-cells = <1>; + }; + + mdio-mux@32000 { + compatible = "mdio-mux-mmioreg", "mdio-mux"; + reg = <0x32000 0x4>; + mux-mask = <0x200>; + #address-cells = <1>; + #size-cells = <0>; + mdio-parent-bus = <&mdio>; + + mdio_int: mdio@0 { + reg = <0x0>; + #address-cells = <1>; + #size-cells = <0>; + + usb3_phy: usb3-phy@10 { + compatible = "brcm,ns-bx-usb3-phy"; + reg = <0x10>; + usb3-dmp-syscon = <&usb3_dmp>; + #phy-cells = <0>; + status = "disabled"; + }; + }; + + mdio_ext: mdio@200 { + reg = <0x200>; + #address-cells = <1>; + #size-cells = <0>; + }; + }; + + rng: rng@33000 { + compatible = "brcm,bcm-nsp-rng"; + reg = <0x33000 0x14>; + }; + + ccbtimer0: timer@34000 { + compatible = "arm,sp804", "arm,primecell"; + reg = <0x34000 0x1000>; + interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&iprocslow>; + clock-names = "apb_pclk"; + }; + + ccbtimer1: timer@35000 { + compatible = "arm,sp804", "arm,primecell"; + reg = <0x35000 0x1000>; + interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&iprocslow>; + clock-names = "apb_pclk"; + }; + + srab: ethernet-switch@36000 { + compatible = "brcm,nsp-srab"; + reg = <0x36000 0x1000>, + <0x3f308 0x8>, + <0x3f410 0xc>; + reg-names = "srab", "mux_config", "sgmii_config"; + interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "link_state_p0", + "link_state_p1", + "link_state_p2", + "link_state_p3", + "link_state_p4", + "link_state_p5", + "link_state_p7", + "link_state_p8", + "phy", + "ts", + "imp_sleep_timer_p5", + "imp_sleep_timer_p7", + "imp_sleep_timer_p8"; + status = "disabled"; + + /* ports are defined in board DTS */ + ports { + #address-cells = <1>; + #size-cells = <0>; + }; + }; + + i2c0: i2c@38000 { + compatible = "brcm,iproc-i2c"; + reg = <0x38000 0x50>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>; + clock-frequency = <100000>; + dma-coherent; + status = "disabled"; + }; + + watchdog@39000 { + compatible = "arm,sp805", "arm,primecell"; + reg = <0x39000 0x1000>; + interrupts = <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&iprocslow>, <&iprocslow>; + clock-names = "wdog_clk", "apb_pclk"; + }; + + lcpll0: lcpll0@3f100 { + #clock-cells = <1>; + compatible = "brcm,nsp-lcpll0"; + reg = <0x3f100 0x14>; + clocks = <&osc>; + clock-output-names = "lcpll0", "pcie_phy", "sdio", + "ddr_phy"; + }; + + genpll: genpll@3f140 { + #clock-cells = <1>; + compatible = "brcm,nsp-genpll"; + reg = <0x3f140 0x24>; + clocks = <&osc>; + clock-output-names = "genpll", "phy", "ethernetclk", + "usbclk", "iprocfast", "sata1", + "sata2"; + }; + + pinctrl: pinctrl@3f1c0 { + compatible = "brcm,nsp-pinmux"; + reg = <0x3f1c0 0x04>, + <0x30028 0x04>, + <0x3f408 0x04>; + }; + + thermal: thermal@3f2c0 { + compatible = "brcm,ns-thermal"; + reg = <0x3f2c0 0x10>; + #thermal-sensor-cells = <0>; + }; + + sata_phy: sata_phy@40100 { + compatible = "brcm,iproc-nsp-sata-phy"; + reg = <0x40100 0x340>; + reg-names = "phy"; + #address-cells = <1>; + #size-cells = <0>; + + sata_phy0: sata-phy@0 { + reg = <0>; + #phy-cells = <0>; + status = "disabled"; + }; + + sata_phy1: sata-phy@1 { + reg = <1>; + #phy-cells = <0>; + status = "disabled"; + }; + }; + + sata: sata@41000 { + compatible = "brcm,bcm-nsp-ahci"; + reg-names = "ahci", "top-ctrl"; + reg = <0x41000 0x1000>, <0x40020 0x1c>; + interrupts = <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + dma-coherent; + status = "disabled"; + + sata0: sata-port@0 { + reg = <0>; + phys = <&sata_phy0>; + phy-names = "sata-phy"; + }; + + sata1: sata-port@1 { + reg = <1>; + phys = <&sata_phy1>; + phy-names = "sata-phy"; + }; + }; + + usb3_dmp: syscon@104000 { + reg = <0x104000 0x1000>; + }; + }; + + pcie0: pcie@18012000 { + compatible = "brcm,iproc-pcie"; + reg = <0x18012000 0x1000>; + + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &gic GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>; + + linux,pci-domain = <0>; + + bus-range = <0x00 0xff>; + + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + + /* Note: The HW does not support I/O resources. So, + * only the memory resource range is being specified. + */ + ranges = <0x82000000 0 0x08000000 0x08000000 0 0x8000000>; + + dma-coherent; + status = "disabled"; + + msi-parent = <&msi0>; + msi0: msi { + compatible = "brcm,iproc-msi"; + msi-controller; + interrupt-parent = <&gic>; + interrupts = <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>; + brcm,pcie-msi-inten; + }; + }; + + pcie1: pcie@18013000 { + compatible = "brcm,iproc-pcie"; + reg = <0x18013000 0x1000>; + + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &gic GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>; + + linux,pci-domain = <1>; + + bus-range = <0x00 0xff>; + + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + + /* Note: The HW does not support I/O resources. So, + * only the memory resource range is being specified. + */ + ranges = <0x82000000 0 0x40000000 0x40000000 0 0x8000000>; + + dma-coherent; + status = "disabled"; + + msi-parent = <&msi1>; + msi1: msi { + compatible = "brcm,iproc-msi"; + msi-controller; + interrupt-parent = <&gic>; + interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>; + brcm,pcie-msi-inten; + }; + }; + + pcie2: pcie@18014000 { + compatible = "brcm,iproc-pcie"; + reg = <0x18014000 0x1000>; + + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &gic GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>; + + linux,pci-domain = <2>; + + bus-range = <0x00 0xff>; + + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + + /* Note: The HW does not support I/O resources. So, + * only the memory resource range is being specified. + */ + ranges = <0x82000000 0 0x48000000 0x48000000 0 0x8000000>; + + dma-coherent; + status = "disabled"; + + msi-parent = <&msi2>; + msi2: msi { + compatible = "brcm,iproc-msi"; + msi-controller; + interrupt-parent = <&gic>; + interrupts = <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>; + brcm,pcie-msi-inten; + }; + }; + + thermal-zones { + cpu-thermal { + polling-delay-passive = <0>; + polling-delay = <1000>; + coefficients = <(-556) 418000>; + thermal-sensors = <&thermal>; + + trips { + cpu-crit { + temperature = <125000>; + hysteresis = <0>; + type = "critical"; + }; + }; + + cooling-maps { + }; + }; + }; +}; diff --git a/dts/src/arm/broadcom/bcm11351.dtsi b/dts/src/arm/broadcom/bcm11351.dtsi new file mode 100644 index 0000000000..53857e5720 --- /dev/null +++ b/dts/src/arm/broadcom/bcm11351.dtsi @@ -0,0 +1,412 @@ +// SPDX-License-Identifier: GPL-2.0-only +// Copyright (C) 2012-2013 Broadcom Corporation + +#include <dt-bindings/clock/bcm281xx.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/interrupt-controller/irq.h> + +/ { + #address-cells = <1>; + #size-cells = <1>; + model = "BCM11351 SoC"; + compatible = "brcm,bcm11351"; + interrupt-parent = <&gic>; + + chosen { + bootargs = "console=ttyS0,115200n8"; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a9"; + reg = <0>; + }; + + cpu1: cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a9"; + enable-method = "brcm,bcm11351-cpu-method"; + secondary-boot-reg = <0x3500417c>; + reg = <1>; + }; + }; + + gic: interrupt-controller@3ff00100 { + compatible = "arm,cortex-a9-gic"; + #interrupt-cells = <3>; + #address-cells = <0>; + interrupt-controller; + reg = <0x3ff01000 0x1000>, + <0x3ff00100 0x100>; + }; + + smc@3404c000 { + compatible = "brcm,bcm11351-smc", "brcm,kona-smc"; + reg = <0x3404c000 0x400>; /* 1 KiB in SRAM */ + }; + + uartb: serial@3e000000 { + compatible = "brcm,bcm11351-dw-apb-uart", "snps,dw-apb-uart"; + reg = <0x3e000000 0x1000>; + clocks = <&slave_ccu BCM281XX_SLAVE_CCU_UARTB>; + interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>; + reg-shift = <2>; + reg-io-width = <4>; + status = "disabled"; + }; + + uartb2: serial@3e001000 { + compatible = "brcm,bcm11351-dw-apb-uart", "snps,dw-apb-uart"; + reg = <0x3e001000 0x1000>; + clocks = <&slave_ccu BCM281XX_SLAVE_CCU_UARTB2>; + interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>; + reg-shift = <2>; + reg-io-width = <4>; + status = "disabled"; + }; + + uartb3: serial@3e002000 { + compatible = "brcm,bcm11351-dw-apb-uart", "snps,dw-apb-uart"; + reg = <0x3e002000 0x1000>; + clocks = <&slave_ccu BCM281XX_SLAVE_CCU_UARTB3>; + interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>; + reg-shift = <2>; + reg-io-width = <4>; + status = "disabled"; + }; + + uartb4: serial@3e003000 { + compatible = "brcm,bcm11351-dw-apb-uart", "snps,dw-apb-uart"; + reg = <0x3e003000 0x1000>; + clocks = <&slave_ccu BCM281XX_SLAVE_CCU_UARTB4>; + interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>; + reg-shift = <2>; + reg-io-width = <4>; + status = "disabled"; + }; + + L2: l2-cache@3ff20000 { + compatible = "brcm,bcm11351-a2-pl310-cache"; + reg = <0x3ff20000 0x1000>; + cache-unified; + cache-level = <2>; + }; + + watchdog@35002f40 { + compatible = "brcm,bcm11351-wdt", "brcm,kona-wdt"; + reg = <0x35002f40 0x6c>; + }; + + timer@35006000 { + compatible = "brcm,kona-timer"; + reg = <0x35006000 0x1000>; + interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&aon_ccu BCM281XX_AON_CCU_HUB_TIMER>; + }; + + gpio: gpio@35003000 { + compatible = "brcm,bcm11351-gpio", "brcm,kona-gpio"; + reg = <0x35003000 0x800>; + interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>; + #gpio-cells = <2>; + #interrupt-cells = <2>; + gpio-controller; + interrupt-controller; + }; + + sdio1: mmc@3f180000 { + compatible = "brcm,kona-sdhci"; + reg = <0x3f180000 0x10000>; + interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&master_ccu BCM281XX_MASTER_CCU_SDIO1>; + status = "disabled"; + }; + + sdio2: mmc@3f190000 { + compatible = "brcm,kona-sdhci"; + reg = <0x3f190000 0x10000>; + interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&master_ccu BCM281XX_MASTER_CCU_SDIO2>; + status = "disabled"; + }; + + sdio3: mmc@3f1a0000 { + compatible = "brcm,kona-sdhci"; + reg = <0x3f1a0000 0x10000>; + interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&master_ccu BCM281XX_MASTER_CCU_SDIO3>; + status = "disabled"; + }; + + sdio4: mmc@3f1b0000 { + compatible = "brcm,kona-sdhci"; + reg = <0x3f1b0000 0x10000>; + interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&master_ccu BCM281XX_MASTER_CCU_SDIO4>; + status = "disabled"; + }; + + pinctrl@35004800 { + compatible = "brcm,bcm11351-pinctrl"; + reg = <0x35004800 0x430>; + }; + + bsc1: i2c@3e016000 { + compatible = "brcm,bcm11351-i2c", "brcm,kona-i2c"; + reg = <0x3e016000 0x80>; + interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&slave_ccu BCM281XX_SLAVE_CCU_BSC1>; + status = "disabled"; + }; + + bsc2: i2c@3e017000 { + compatible = "brcm,bcm11351-i2c", "brcm,kona-i2c"; + reg = <0x3e017000 0x80>; + interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&slave_ccu BCM281XX_SLAVE_CCU_BSC2>; + status = "disabled"; + }; + + bsc3: i2c@3e018000 { + compatible = "brcm,bcm11351-i2c", "brcm,kona-i2c"; + reg = <0x3e018000 0x80>; + interrupts = <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&slave_ccu BCM281XX_SLAVE_CCU_BSC3>; + status = "disabled"; + }; + + pmu_bsc: i2c@3500d000 { + compatible = "brcm,bcm11351-i2c", "brcm,kona-i2c"; + reg = <0x3500d000 0x80>; + interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&aon_ccu BCM281XX_AON_CCU_PMU_BSC>; + status = "disabled"; + }; + + pwm: pwm@3e01a000 { + compatible = "brcm,bcm11351-pwm", "brcm,kona-pwm"; + reg = <0x3e01a000 0xcc>; + clocks = <&slave_ccu BCM281XX_SLAVE_CCU_PWM>; + #pwm-cells = <3>; + status = "disabled"; + }; + + clocks { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + root_ccu: root_ccu@35001000 { + compatible = "brcm,bcm11351-root-ccu"; + reg = <0x35001000 0x0f00>; + #clock-cells = <1>; + clock-output-names = "frac_1m"; + }; + + hub_ccu: hub_ccu@34000000 { + compatible = "brcm,bcm11351-hub-ccu"; + reg = <0x34000000 0x0f00>; + #clock-cells = <1>; + clock-output-names = "tmon_1m"; + }; + + aon_ccu: aon_ccu@35002000 { + compatible = "brcm,bcm11351-aon-ccu"; + reg = <0x35002000 0x0f00>; + #clock-cells = <1>; + clock-output-names = "hub_timer", + "pmu_bsc", + "pmu_bsc_var"; + }; + + master_ccu: master_ccu@3f001000 { + compatible = "brcm,bcm11351-master-ccu"; + reg = <0x3f001000 0x0f00>; + #clock-cells = <1>; + clock-output-names = "sdio1", + "sdio2", + "sdio3", + "sdio4", + "usb_ic", + "hsic2_48m", + "hsic2_12m"; + }; + + slave_ccu: slave_ccu@3e011000 { + compatible = "brcm,bcm11351-slave-ccu"; + reg = <0x3e011000 0x0f00>; + #clock-cells = <1>; + clock-output-names = "uartb", + "uartb2", + "uartb3", + "uartb4", + "ssp0", + "ssp2", + "bsc1", + "bsc2", + "bsc3", + "pwm"; + }; + + ref_1m_clk: ref_1m { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <1000000>; + }; + + ref_32k_clk: ref_32k { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <32768>; + }; + + bbl_32k_clk: bbl_32k { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <32768>; + }; + + ref_13m_clk: ref_13m { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <13000000>; + }; + + var_13m_clk: var_13m { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <13000000>; + }; + + dft_19_5m_clk: dft_19_5m { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <19500000>; + }; + + ref_crystal_clk: ref_crystal { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <26000000>; + }; + + ref_cx40_clk: ref_cx40 { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <40000000>; + }; + + ref_52m_clk: ref_52m { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <52000000>; + }; + + var_52m_clk: var_52m { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <52000000>; + }; + + usb_otg_ahb_clk: usb_otg_ahb { + compatible = "fixed-clock"; + clock-frequency = <52000000>; + #clock-cells = <0>; + }; + + ref_96m_clk: ref_96m { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <96000000>; + }; + + var_96m_clk: var_96m { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <96000000>; + }; + + ref_104m_clk: ref_104m { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <104000000>; + }; + + var_104m_clk: var_104m { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <104000000>; + }; + + ref_156m_clk: ref_156m { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <156000000>; + }; + + var_156m_clk: var_156m { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <156000000>; + }; + + ref_208m_clk: ref_208m { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <208000000>; + }; + + var_208m_clk: var_208m { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <208000000>; + }; + + ref_312m_clk: ref_312m { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <312000000>; + }; + + var_312m_clk: var_312m { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <312000000>; + }; + }; + + usbotg: usb@3f120000 { + compatible = "snps,dwc2"; + reg = <0x3f120000 0x10000>; + interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&usb_otg_ahb_clk>; + clock-names = "otg"; + phys = <&usbphy>; + phy-names = "usb2-phy"; + status = "disabled"; + }; + + usbphy: usb-phy@3f130000 { + compatible = "brcm,kona-usb2-phy"; + reg = <0x3f130000 0x28>; + #phy-cells = <0>; + status = "disabled"; + }; +}; diff --git a/dts/src/arm/broadcom/bcm21664-garnet.dts b/dts/src/arm/broadcom/bcm21664-garnet.dts new file mode 100644 index 0000000000..8789fae178 --- /dev/null +++ b/dts/src/arm/broadcom/bcm21664-garnet.dts @@ -0,0 +1,47 @@ +// SPDX-License-Identifier: GPL-2.0-only +// Copyright (C) 2014 Broadcom Corporation + +/dts-v1/; + +#include <dt-bindings/gpio/gpio.h> + +#include "bcm21664.dtsi" + +/ { + model = "BCM21664 Garnet board"; + compatible = "brcm,bcm21664-garnet", "brcm,bcm21664"; + + memory@80000000 { + device_type = "memory"; + reg = <0x80000000 0x40000000>; /* 1 GB */ + }; +}; + +&sdio1 { + max-frequency = <48000000>; + status = "okay"; +}; + +&sdio2 { + non-removable; + max-frequency = <48000000>; + status = "okay"; +}; + +&sdio4 { + max-frequency = <48000000>; + cd-gpios = <&gpio 91 GPIO_ACTIVE_LOW>; + status = "okay"; +}; + +&uartb { + status = "okay"; +}; + +&usbotg { + status = "okay"; +}; + +&usbphy { + status = "okay"; +}; diff --git a/dts/src/arm/broadcom/bcm21664.dtsi b/dts/src/arm/broadcom/bcm21664.dtsi new file mode 100644 index 0000000000..fa73600e88 --- /dev/null +++ b/dts/src/arm/broadcom/bcm21664.dtsi @@ -0,0 +1,345 @@ +// SPDX-License-Identifier: GPL-2.0-only +// Copyright (C) 2014 Broadcom Corporation + +#include <dt-bindings/clock/bcm21664.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/interrupt-controller/irq.h> + +/ { + #address-cells = <1>; + #size-cells = <1>; + model = "BCM21664 SoC"; + compatible = "brcm,bcm21664"; + interrupt-parent = <&gic>; + + chosen { + bootargs = "console=ttyS0,115200n8"; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a9"; + reg = <0>; + }; + + cpu1: cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a9"; + enable-method = "brcm,bcm11351-cpu-method"; + secondary-boot-reg = <0x35004178>; + reg = <1>; + }; + }; + + gic: interrupt-controller@3ff00100 { + compatible = "arm,cortex-a9-gic"; + #interrupt-cells = <3>; + #address-cells = <0>; + interrupt-controller; + reg = <0x3ff01000 0x1000>, + <0x3ff00100 0x100>; + }; + + smc@3404e000 { + compatible = "brcm,bcm21664-smc", "brcm,kona-smc"; + reg = <0x3404e000 0x400>; /* 1 KiB in SRAM */ + }; + + uartb: serial@3e000000 { + compatible = "brcm,bcm21664-dw-apb-uart", "snps,dw-apb-uart"; + reg = <0x3e000000 0x118>; + clocks = <&slave_ccu BCM21664_SLAVE_CCU_UARTB>; + interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>; + reg-shift = <2>; + reg-io-width = <4>; + status = "disabled"; + }; + + uartb2: serial@3e001000 { + compatible = "brcm,bcm21664-dw-apb-uart", "snps,dw-apb-uart"; + reg = <0x3e001000 0x118>; + clocks = <&slave_ccu BCM21664_SLAVE_CCU_UARTB2>; + interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>; + reg-shift = <2>; + reg-io-width = <4>; + status = "disabled"; + }; + + uartb3: serial@3e002000 { + compatible = "brcm,bcm21664-dw-apb-uart", "snps,dw-apb-uart"; + reg = <0x3e002000 0x118>; + clocks = <&slave_ccu BCM21664_SLAVE_CCU_UARTB3>; + interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>; + reg-shift = <2>; + reg-io-width = <4>; + status = "disabled"; + }; + + L2: cache-controller@3ff20000 { + compatible = "arm,pl310-cache"; + reg = <0x3ff20000 0x1000>; + cache-unified; + cache-level = <2>; + }; + + brcm,resetmgr@35001f00 { + compatible = "brcm,bcm21664-resetmgr"; + reg = <0x35001f00 0x24>; + }; + + timer@35006000 { + compatible = "brcm,kona-timer"; + reg = <0x35006000 0x1c>; + interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&aon_ccu BCM21664_AON_CCU_HUB_TIMER>; + }; + + gpio: gpio@35003000 { + compatible = "brcm,bcm21664-gpio", "brcm,kona-gpio"; + reg = <0x35003000 0x524>; + interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>; + #gpio-cells = <2>; + #interrupt-cells = <2>; + gpio-controller; + interrupt-controller; + }; + + sdio1: mmc@3f180000 { + compatible = "brcm,kona-sdhci"; + reg = <0x3f180000 0x801c>; + interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&master_ccu BCM21664_MASTER_CCU_SDIO1>; + status = "disabled"; + }; + + sdio2: mmc@3f190000 { + compatible = "brcm,kona-sdhci"; + reg = <0x3f190000 0x801c>; + interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&master_ccu BCM21664_MASTER_CCU_SDIO2>; + status = "disabled"; + }; + + sdio3: mmc@3f1a0000 { + compatible = "brcm,kona-sdhci"; + reg = <0x3f1a0000 0x801c>; + interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&master_ccu BCM21664_MASTER_CCU_SDIO3>; + status = "disabled"; + }; + + sdio4: mmc@3f1b0000 { + compatible = "brcm,kona-sdhci"; + reg = <0x3f1b0000 0x801c>; + interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&master_ccu BCM21664_MASTER_CCU_SDIO4>; + status = "disabled"; + }; + + bsc1: i2c@3e016000 { + compatible = "brcm,bcm21664-i2c", "brcm,kona-i2c"; + reg = <0x3e016000 0x70>; + interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&slave_ccu BCM21664_SLAVE_CCU_BSC1>; + status = "disabled"; + }; + + bsc2: i2c@3e017000 { + compatible = "brcm,bcm21664-i2c", "brcm,kona-i2c"; + reg = <0x3e017000 0x70>; + interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&slave_ccu BCM21664_SLAVE_CCU_BSC2>; + status = "disabled"; + }; + + bsc3: i2c@3e018000 { + compatible = "brcm,bcm21664-i2c", "brcm,kona-i2c"; + reg = <0x3e018000 0x70>; + interrupts = <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&slave_ccu BCM21664_SLAVE_CCU_BSC3>; + status = "disabled"; + }; + + bsc4: i2c@3e01c000 { + compatible = "brcm,bcm21664-i2c", "brcm,kona-i2c"; + reg = <0x3e01c000 0x70>; + interrupts = <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&slave_ccu BCM21664_SLAVE_CCU_BSC4>; + status = "disabled"; + }; + + clocks { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + /* + * Fixed clocks are defined before CCUs whose + * clocks may depend on them. + */ + + ref_32k_clk: ref_32k { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <32768>; + }; + + bbl_32k_clk: bbl_32k { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <32768>; + }; + + ref_13m_clk: ref_13m { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <13000000>; + }; + + var_13m_clk: var_13m { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <13000000>; + }; + + dft_19_5m_clk: dft_19_5m { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <19500000>; + }; + + ref_crystal_clk: ref_crystal { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <26000000>; + }; + + ref_52m_clk: ref_52m { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <52000000>; + }; + + var_52m_clk: var_52m { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <52000000>; + }; + + usb_otg_ahb_clk: usb_otg_ahb { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <52000000>; + }; + + ref_96m_clk: ref_96m { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <96000000>; + }; + + var_96m_clk: var_96m { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <96000000>; + }; + + ref_104m_clk: ref_104m { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <104000000>; + }; + + var_104m_clk: var_104m { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <104000000>; + }; + + ref_156m_clk: ref_156m { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <156000000>; + }; + + var_156m_clk: var_156m { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <156000000>; + }; + + root_ccu: root_ccu@35001000 { + compatible = "brcm,bcm21664-root-ccu"; + reg = <0x35001000 0x0f00>; + #clock-cells = <1>; + clock-output-names = "frac_1m"; + }; + + aon_ccu: aon_ccu@35002000 { + compatible = "brcm,bcm21664-aon-ccu"; + reg = <0x35002000 0x0f00>; + #clock-cells = <1>; + clock-output-names = "hub_timer"; + }; + + master_ccu: master_ccu@3f001000 { + compatible = "brcm,bcm21664-master-ccu"; + reg = <0x3f001000 0x0f00>; + #clock-cells = <1>; + clock-output-names = "sdio1", + "sdio2", + "sdio3", + "sdio4", + "sdio1_sleep", + "sdio2_sleep", + "sdio3_sleep", + "sdio4_sleep"; + }; + + slave_ccu: slave_ccu@3e011000 { + compatible = "brcm,bcm21664-slave-ccu"; + reg = <0x3e011000 0x0f00>; + #clock-cells = <1>; + clock-output-names = "uartb", + "uartb2", + "uartb3", + "bsc1", + "bsc2", + "bsc3", + "bsc4"; + }; + }; + + usbotg: usb@3f120000 { + compatible = "snps,dwc2"; + reg = <0x3f120000 0x10000>; + interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&usb_otg_ahb_clk>; + clock-names = "otg"; + phys = <&usbphy>; + phy-names = "usb2-phy"; + status = "disabled"; + }; + + usbphy: usb-phy@3f130000 { + compatible = "brcm,kona-usb2-phy"; + reg = <0x3f130000 0x28>; + #phy-cells = <0>; + status = "disabled"; + }; +}; diff --git a/dts/src/arm/broadcom/bcm23550-sparrow.dts b/dts/src/arm/broadcom/bcm23550-sparrow.dts new file mode 100644 index 0000000000..ace77709f4 --- /dev/null +++ b/dts/src/arm/broadcom/bcm23550-sparrow.dts @@ -0,0 +1,81 @@ +/* + * BSD LICENSE + * + * Copyright(c) 2016 Broadcom. All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * * Neither the name of Broadcom Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/dts-v1/; + +#include <dt-bindings/gpio/gpio.h> + +#include "bcm23550.dtsi" + +/ { + model = "BCM23550 Sparrow board"; + compatible = "brcm,bcm23550-sparrow", "brcm,bcm23550"; + + chosen { + stdout-path = "/slaves@3e000000/serial@0:115200n8"; + bootargs = "console=ttyS0,115200n8"; + }; + + memory@80000000 { + device_type = "memory"; + reg = <0x80000000 0x20000000>; /* 512 MB */ + }; +}; + +&uartb { + status = "okay"; +}; + +&usbotg { + status = "okay"; +}; + +&usbphy { + status = "okay"; +}; + +&sdio1 { + max-frequency = <48000000>; + status = "okay"; +}; + +&sdio2 { + non-removable; + max-frequency = <48000000>; + status = "okay"; +}; + +&sdio4 { + max-frequency = <48000000>; + cd-gpios = <&gpio 91 GPIO_ACTIVE_LOW>; + status = "okay"; +}; diff --git a/dts/src/arm/broadcom/bcm23550.dtsi b/dts/src/arm/broadcom/bcm23550.dtsi new file mode 100644 index 0000000000..50ebe93d6b --- /dev/null +++ b/dts/src/arm/broadcom/bcm23550.dtsi @@ -0,0 +1,413 @@ +/* + * BSD LICENSE + * + * Copyright(c) 2016 Broadcom. All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * * Neither the name of Broadcom Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/* BCM23550 and BCM21664 have almost identical clocks */ +#include <dt-bindings/clock/bcm21664.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/interrupt-controller/irq.h> + +/ { + #address-cells = <1>; + #size-cells = <1>; + model = "BCM23550 SoC"; + compatible = "brcm,bcm23550"; + interrupt-parent = <&gic>; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a7"; + reg = <0>; + clock-frequency = <1000000000>; + }; + + cpu1: cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a7"; + enable-method = "brcm,bcm23550"; + secondary-boot-reg = <0x35004178>; + reg = <1>; + clock-frequency = <1000000000>; + }; + + cpu2: cpu@2 { + device_type = "cpu"; + compatible = "arm,cortex-a7"; + enable-method = "brcm,bcm23550"; + secondary-boot-reg = <0x35004178>; + reg = <2>; + clock-frequency = <1000000000>; + }; + + cpu3: cpu@3 { + device_type = "cpu"; + compatible = "arm,cortex-a7"; + enable-method = "brcm,bcm23550"; + secondary-boot-reg = <0x35004178>; + reg = <3>; + clock-frequency = <1000000000>; + }; + }; + + /* Hub bus */ + hub@34000000 { + compatible = "simple-bus"; + ranges = <0 0x34000000 0x102f83ac>; + #address-cells = <1>; + #size-cells = <1>; + + smc@4e000 { + compatible = "brcm,bcm23550-smc", "brcm,kona-smc"; + reg = <0x0004e000 0x400>; /* 1 KiB in SRAM */ + }; + + resetmgr: reset-controller@1001f00 { + compatible = "brcm,bcm21664-resetmgr"; + reg = <0x01001f00 0x24>; + }; + + gpio: gpio@1003000 { + compatible = "brcm,bcm23550-gpio", "brcm,kona-gpio"; + reg = <0x01003000 0x524>; + interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>; + #gpio-cells = <2>; + #interrupt-cells = <2>; + gpio-controller; + interrupt-controller; + }; + + timer@1006000 { + compatible = "brcm,kona-timer"; + reg = <0x01006000 0x1c>; + interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&aon_ccu BCM21664_AON_CCU_HUB_TIMER>; + }; + }; + + /* Slaves bus */ + slaves@3e000000 { + compatible = "simple-bus"; + ranges = <0 0x3e000000 0x0001c070>; + #address-cells = <1>; + #size-cells = <1>; + + uartb: serial@0 { + compatible = "snps,dw-apb-uart"; + reg = <0x00000000 0x118>; + clocks = <&slave_ccu BCM21664_SLAVE_CCU_UARTB>; + interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>; + reg-shift = <2>; + reg-io-width = <4>; + status = "disabled"; + }; + + uartb2: serial@1000 { + compatible = "snps,dw-apb-uart"; + reg = <0x00001000 0x118>; + clocks = <&slave_ccu BCM21664_SLAVE_CCU_UARTB2>; + interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>; + reg-shift = <2>; + reg-io-width = <4>; + status = "disabled"; + }; + + uartb3: serial@2000 { + compatible = "snps,dw-apb-uart"; + reg = <0x00002000 0x118>; + clocks = <&slave_ccu BCM21664_SLAVE_CCU_UARTB3>; + interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>; + reg-shift = <2>; + reg-io-width = <4>; + status = "disabled"; + }; + + bsc1: i2c@16000 { + compatible = "brcm,bcm23550-i2c", "brcm,kona-i2c"; + reg = <0x00016000 0x70>; + interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&slave_ccu BCM21664_SLAVE_CCU_BSC1>; + status = "disabled"; + }; + + bsc2: i2c@17000 { + compatible = "brcm,bcm23550-i2c", "brcm,kona-i2c"; + reg = <0x00017000 0x70>; + interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&slave_ccu BCM21664_SLAVE_CCU_BSC2>; + status = "disabled"; + }; + + bsc3: i2c@18000 { + compatible = "brcm,bcm23550-i2c", "brcm,kona-i2c"; + reg = <0x00018000 0x70>; + interrupts = <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&slave_ccu BCM21664_SLAVE_CCU_BSC3>; + status = "disabled"; + }; + + bsc4: i2c@1c000 { + compatible = "brcm,bcm23550-i2c", "brcm,kona-i2c"; + reg = <0x0001c000 0x70>; + interrupts = <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&slave_ccu BCM21664_SLAVE_CCU_BSC4>; + status = "disabled"; + }; + }; + + /* Apps bus */ + apps@3e300000 { + compatible = "simple-bus"; + ranges = <0 0x3e300000 0x01b77000>; + #address-cells = <1>; + #size-cells = <1>; + + usbotg: usb@e20000 { + compatible = "snps,dwc2"; + reg = <0x00e20000 0x10000>; + interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&usb_otg_ahb_clk>; + clock-names = "otg"; + phys = <&usbphy>; + phy-names = "usb2-phy"; + status = "disabled"; + }; + + usbphy: usb-phy@e30000 { + compatible = "brcm,kona-usb2-phy"; + reg = <0x00e30000 0x28>; + #phy-cells = <0>; + status = "disabled"; + }; + + sdio1: mmc@e80000 { + compatible = "brcm,kona-sdhci"; + reg = <0x00e80000 0x801c>; + interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&master_ccu BCM21664_MASTER_CCU_SDIO1>; + status = "disabled"; + }; + + sdio2: mmc@e90000 { + compatible = "brcm,kona-sdhci"; + reg = <0x00e90000 0x801c>; + interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&master_ccu BCM21664_MASTER_CCU_SDIO2>; + status = "disabled"; + }; + + sdio3: mmc@ea0000 { + compatible = "brcm,kona-sdhci"; + reg = <0x00ea0000 0x801c>; + interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&master_ccu BCM21664_MASTER_CCU_SDIO3>; + status = "disabled"; + }; + + sdio4: mmc@eb0000 { + compatible = "brcm,kona-sdhci"; + reg = <0x00eb0000 0x801c>; + interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&master_ccu BCM21664_MASTER_CCU_SDIO4>; + status = "disabled"; + }; + + cdc: cdc@1b0e000 { + compatible = "brcm,bcm23550-cdc"; + reg = <0x01b0e000 0x78>; + }; + + gic: interrupt-controller@1b21000 { + compatible = "arm,cortex-a9-gic"; + #interrupt-cells = <3>; + #address-cells = <0>; + interrupt-controller; + reg = <0x01b21000 0x1000>, + <0x01b22000 0x1000>; + }; + }; + + clocks { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + /* + * Fixed clocks are defined before CCUs whose + * clocks may depend on them. + */ + + ref_32k_clk: ref_32k { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <32768>; + }; + + bbl_32k_clk: bbl_32k { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <32768>; + }; + + ref_13m_clk: ref_13m { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <13000000>; + }; + + var_13m_clk: var_13m { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <13000000>; + }; + + dft_19_5m_clk: dft_19_5m { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <19500000>; + }; + + ref_crystal_clk: ref_crystal { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <26000000>; + }; + + ref_52m_clk: ref_52m { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <52000000>; + }; + + var_52m_clk: var_52m { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <52000000>; + }; + + usb_otg_ahb_clk: usb_otg_ahb { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <52000000>; + }; + + ref_96m_clk: ref_96m { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <96000000>; + }; + + var_96m_clk: var_96m { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <96000000>; + }; + + ref_104m_clk: ref_104m { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <104000000>; + }; + + var_104m_clk: var_104m { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <104000000>; + }; + + ref_156m_clk: ref_156m { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <156000000>; + }; + + var_156m_clk: var_156m { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <156000000>; + }; + + root_ccu: root_ccu@35001000 { + compatible = "brcm,bcm21664-root-ccu"; + reg = <0x35001000 0x0f00>; + #clock-cells = <1>; + clock-output-names = "frac_1m"; + }; + + aon_ccu: aon_ccu@35002000 { + compatible = "brcm,bcm21664-aon-ccu"; + reg = <0x35002000 0x0f00>; + #clock-cells = <1>; + clock-output-names = "hub_timer"; + }; + + slave_ccu: slave_ccu@3e011000 { + compatible = "brcm,bcm21664-slave-ccu"; + reg = <0x3e011000 0x0f00>; + #clock-cells = <1>; + clock-output-names = "uartb", + "uartb2", + "uartb3", + "bsc1", + "bsc2", + "bsc3", + "bsc4"; + }; + + master_ccu: master_ccu@3f001000 { + compatible = "brcm,bcm21664-master-ccu"; + reg = <0x3f001000 0x0f00>; + #clock-cells = <1>; + clock-output-names = "sdio1", + "sdio2", + "sdio3", + "sdio4", + "sdio1_sleep", + "sdio2_sleep", + "sdio3_sleep", + "sdio4_sleep"; + }; + }; +}; diff --git a/dts/src/arm/broadcom/bcm2711-rpi-4-b.dts b/dts/src/arm/broadcom/bcm2711-rpi-4-b.dts new file mode 100644 index 0000000000..d5f8823230 --- /dev/null +++ b/dts/src/arm/broadcom/bcm2711-rpi-4-b.dts @@ -0,0 +1,243 @@ +// SPDX-License-Identifier: GPL-2.0 +/dts-v1/; +#include "bcm2711.dtsi" +#include "bcm2711-rpi.dtsi" +#include "bcm283x-rpi-led-deprecated.dtsi" +#include "bcm283x-rpi-usb-peripheral.dtsi" +#include "bcm283x-rpi-wifi-bt.dtsi" + +/ { + compatible = "raspberrypi,4-model-b", "brcm,bcm2711"; + model = "Raspberry Pi 4 Model B"; + + chosen { + /* 8250 auxiliary UART instead of pl011 */ + stdout-path = "serial1:115200n8"; + }; + + sd_io_1v8_reg: regulator-sd-io-1v8 { + compatible = "regulator-gpio"; + regulator-name = "vdd-sd-io"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + regulator-settling-time-us = <5000>; + gpios = <&expgpio 4 GPIO_ACTIVE_HIGH>; + states = <1800000 0x1>, + <3300000 0x0>; + status = "okay"; + }; + + sd_vcc_reg: regulator-sd-vcc { + compatible = "regulator-fixed"; + regulator-name = "vcc-sd"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + enable-active-high; + gpio = <&expgpio 6 GPIO_ACTIVE_HIGH>; + }; +}; + +&bt { + shutdown-gpios = <&expgpio 0 GPIO_ACTIVE_HIGH>; +}; + +&ddc0 { + status = "okay"; +}; + +&ddc1 { + status = "okay"; +}; + +&expgpio { + gpio-line-names = "BT_ON", /* 0 */ + "WL_ON", + "PWR_LED_OFF", + "GLOBAL_RESET", + "VDD_SD_IO_SEL", + "CAM_GPIO", /* 5 */ + "SD_PWR_ON", + ""; +}; + +&gpio { + /* + * Parts taken from rpi_SCH_4b_4p0_reduced.pdf and + * the official GPU firmware DT blob. + * + * Legend: + * "FOO" = GPIO line named "FOO" on the schematic + * "FOO_N" = GPIO line named "FOO" on schematic, active low + */ + gpio-line-names = "ID_SDA", /* 0 */ + "ID_SCL", + "SDA1", + "SCL1", + "GPIO_GCLK", + "GPIO5", /* 5 */ + "GPIO6", + "SPI_CE1_N", + "SPI_CE0_N", + "SPI_MISO", + "SPI_MOSI", /* 10 */ + "SPI_SCLK", + "GPIO12", + "GPIO13", + /* Serial port */ + "TXD1", + "RXD1", /* 15 */ + "GPIO16", + "GPIO17", + "GPIO18", + "GPIO19", + "GPIO20", /* 20 */ + "GPIO21", + "GPIO22", + "GPIO23", + "GPIO24", + "GPIO25", /* 25 */ + "GPIO26", + "GPIO27", + "RGMII_MDIO", + "RGMIO_MDC", + /* Used by BT module */ + "CTS0", /* 30 */ + "RTS0", + "TXD0", + "RXD0", + /* Used by Wifi */ + "SD1_CLK", + "SD1_CMD", /* 35 */ + "SD1_DATA0", + "SD1_DATA1", + "SD1_DATA2", + "SD1_DATA3", + /* Shared with SPI flash */ + "PWM0_MISO", /* 40 */ + "PWM1_MOSI", + "STATUS_LED_G_CLK", + "SPIFLASH_CE_N", + "SDA0", + "SCL0", /* 45 */ + "RGMII_RXCLK", + "RGMII_RXCTL", + "RGMII_RXD0", + "RGMII_RXD1", + "RGMII_RXD2", /* 50 */ + "RGMII_RXD3", + "RGMII_TXCLK", + "RGMII_TXCTL", + "RGMII_TXD0", + "RGMII_TXD1", /* 55 */ + "RGMII_TXD2", + "RGMII_TXD3"; +}; + +&hdmi0 { + status = "okay"; +}; + +&hdmi1 { + status = "okay"; +}; + +&led_act { + gpios = <&gpio 42 GPIO_ACTIVE_HIGH>; +}; + +&leds { + led_pwr: led-pwr { + label = "PWR"; + gpios = <&expgpio 2 GPIO_ACTIVE_LOW>; + default-state = "keep"; + linux,default-trigger = "default-on"; + }; +}; + +&pixelvalve0 { + status = "okay"; +}; + +&pixelvalve1 { + status = "okay"; +}; + +&pixelvalve2 { + status = "okay"; +}; + +&pixelvalve4 { + status = "okay"; +}; + +&pwm1 { + pinctrl-names = "default"; + pinctrl-0 = <&pwm1_0_gpio40 &pwm1_1_gpio41>; + status = "okay"; +}; + +/* EMMC2 is used to drive the SD card */ +&emmc2 { + vqmmc-supply = <&sd_io_1v8_reg>; + vmmc-supply = <&sd_vcc_reg>; + broken-cd; + status = "okay"; +}; + +&genet { + phy-handle = <&phy1>; + phy-mode = "rgmii-rxid"; + status = "okay"; +}; + +&genet_mdio { + phy1: ethernet-phy@1 { + /* No PHY interrupt */ + reg = <0x1>; + }; +}; + +&pcie0 { + pci@0,0 { + device_type = "pci"; + #address-cells = <3>; + #size-cells = <2>; + ranges; + + reg = <0 0 0 0 0>; + + usb@0,0 { + reg = <0 0 0 0 0>; + resets = <&reset RASPBERRYPI_FIRMWARE_RESET_ID_USB>; + }; + }; +}; + +/* uart0 communicates with the BT module */ +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_ctsrts_gpio30 &uart0_gpio32>; + uart-has-rtscts; +}; + +/* uart1 is mapped to the pin header */ +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&uart1_gpio14>; + status = "okay"; +}; + +&vc4 { + status = "okay"; +}; + +&vec { + status = "disabled"; +}; + +&wifi_pwrseq { + reset-gpios = <&expgpio 1 GPIO_ACTIVE_LOW>; +}; diff --git a/dts/src/arm/broadcom/bcm2711-rpi-400.dts b/dts/src/arm/broadcom/bcm2711-rpi-400.dts new file mode 100644 index 0000000000..5a2869a18b --- /dev/null +++ b/dts/src/arm/broadcom/bcm2711-rpi-400.dts @@ -0,0 +1,43 @@ +// SPDX-License-Identifier: GPL-2.0 +/dts-v1/; +#include "bcm2711-rpi-4-b.dts" + +/ { + compatible = "raspberrypi,400", "brcm,bcm2711"; + model = "Raspberry Pi 400"; + + chosen { + /* 8250 auxiliary UART instead of pl011 */ + stdout-path = "serial1:115200n8"; + }; + + gpio-poweroff { + compatible = "gpio-poweroff"; + gpios = <&expgpio 5 GPIO_ACTIVE_HIGH>; + }; +}; + +&expgpio { + gpio-line-names = "BT_ON", + "WL_ON", + "PWR_LED_OFF", + "GLOBAL_RESET", + "VDD_SD_IO_SEL", + "GLOBAL_SHUTDOWN", + "SD_PWR_ON", + "SHUTDOWN_REQUEST"; +}; + +&genet_mdio { + clock-frequency = <1950000>; +}; + +&led_pwr { + gpios = <&gpio 42 GPIO_ACTIVE_HIGH>; +}; + +/delete-node/ &led_act; + +&pm { + /delete-property/ system-power-controller; +}; diff --git a/dts/src/arm/broadcom/bcm2711-rpi-cm4-io.dts b/dts/src/arm/broadcom/bcm2711-rpi-cm4-io.dts new file mode 100644 index 0000000000..d7ba02f586 --- /dev/null +++ b/dts/src/arm/broadcom/bcm2711-rpi-cm4-io.dts @@ -0,0 +1,139 @@ +// SPDX-License-Identifier: GPL-2.0 +/dts-v1/; +#include "bcm2711-rpi-cm4.dtsi" +#include "bcm283x-rpi-led-deprecated.dtsi" +#include "bcm283x-rpi-usb-host.dtsi" + +/ { + model = "Raspberry Pi Compute Module 4 IO Board"; +}; + +&ddc0 { + status = "okay"; +}; + +&ddc1 { + status = "okay"; +}; + +&gpio { + /* + * Parts taken from rpi_SCH_4b_4p0_reduced.pdf and + * the official GPU firmware DT blob. + * + * Legend: + * "FOO" = GPIO line named "FOO" on the schematic + * "FOO_N" = GPIO line named "FOO" on schematic, active low + */ + gpio-line-names = "ID_SDA", + "ID_SCL", + "SDA1", + "SCL1", + "GPIO_GCLK", + "GPIO5", + "GPIO6", + "SPI_CE1_N", + "SPI_CE0_N", + "SPI_MISO", + "SPI_MOSI", + "SPI_SCLK", + "GPIO12", + "GPIO13", + /* Serial port */ + "TXD1", + "RXD1", + "GPIO16", + "GPIO17", + "GPIO18", + "GPIO19", + "GPIO20", + "GPIO21", + "GPIO22", + "GPIO23", + "GPIO24", + "GPIO25", + "GPIO26", + "GPIO27", + "RGMII_MDIO", + "RGMIO_MDC", + /* Used by BT module */ + "CTS0", + "RTS0", + "TXD0", + "RXD0", + /* Used by Wifi */ + "SD1_CLK", + "SD1_CMD", + "SD1_DATA0", + "SD1_DATA1", + "SD1_DATA2", + "SD1_DATA3", + /* Shared with SPI flash */ + "PWM0_MISO", + "PWM1_MOSI", + "STATUS_LED_G_CLK", + "SPIFLASH_CE_N", + "SDA0", + "SCL0", + "RGMII_RXCLK", + "RGMII_RXCTL", + "RGMII_RXD0", + "RGMII_RXD1", + "RGMII_RXD2", + "RGMII_RXD3", + "RGMII_TXCLK", + "RGMII_TXCTL", + "RGMII_TXD0", + "RGMII_TXD1", + "RGMII_TXD2", + "RGMII_TXD3"; +}; + +&hdmi0 { + status = "okay"; +}; + +&hdmi1 { + status = "okay"; +}; + +&genet { + status = "okay"; +}; + +&led_act { + gpios = <&gpio 42 GPIO_ACTIVE_HIGH>; +}; + +&leds { + led-pwr { + label = "PWR"; + gpios = <&expgpio 2 GPIO_ACTIVE_LOW>; + default-state = "keep"; + linux,default-trigger = "default-on"; + }; +}; + +&pixelvalve0 { + status = "okay"; +}; + +&pixelvalve1 { + status = "okay"; +}; + +&pixelvalve2 { + status = "okay"; +}; + +&pixelvalve4 { + status = "okay"; +}; + +&vc4 { + status = "okay"; +}; + +&vec { + status = "disabled"; +}; diff --git a/dts/src/arm/broadcom/bcm2711-rpi-cm4.dtsi b/dts/src/arm/broadcom/bcm2711-rpi-cm4.dtsi new file mode 100644 index 0000000000..48e63ab784 --- /dev/null +++ b/dts/src/arm/broadcom/bcm2711-rpi-cm4.dtsi @@ -0,0 +1,113 @@ +// SPDX-License-Identifier: GPL-2.0 +/dts-v1/; +#include "bcm2711.dtsi" +#include "bcm2711-rpi.dtsi" +#include "bcm283x-rpi-wifi-bt.dtsi" + +/ { + compatible = "raspberrypi,4-compute-module", "brcm,bcm2711"; + + chosen { + /* 8250 auxiliary UART instead of pl011 */ + stdout-path = "serial1:115200n8"; + }; + + sd_io_1v8_reg: regulator-sd-io-1v8 { + compatible = "regulator-gpio"; + regulator-name = "vdd-sd-io"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + regulator-settling-time-us = <5000>; + gpios = <&expgpio 4 GPIO_ACTIVE_HIGH>; + states = <1800000 0x1>, + <3300000 0x0>; + status = "okay"; + }; + + sd_vcc_reg: regulator-sd-vcc { + compatible = "regulator-fixed"; + regulator-name = "vcc-sd"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + enable-active-high; + gpio = <&expgpio 6 GPIO_ACTIVE_HIGH>; + }; +}; + +&bt { + shutdown-gpios = <&expgpio 0 GPIO_ACTIVE_HIGH>; +}; + +/* EMMC2 is used to drive the eMMC */ +&emmc2 { + bus-width = <8>; + vqmmc-supply = <&sd_io_1v8_reg>; + vmmc-supply = <&sd_vcc_reg>; + broken-cd; + /* Even the IP block is limited to 100 MHz + * this provides a throughput gain + */ + mmc-hs200-1_8v; + status = "okay"; +}; + +&expgpio { + gpio-line-names = "BT_ON", + "WL_ON", + "PWR_LED_OFF", + "ANT1", + "VDD_SD_IO_SEL", + "CAM_GPIO", + "SD_PWR_ON", + "ANT2"; + + ant1: ant1-hog { + gpio-hog; + gpios = <3 GPIO_ACTIVE_HIGH>; + /* internal antenna enabled */ + output-high; + line-name = "ant1"; + }; + + ant2: ant2-hog { + gpio-hog; + gpios = <7 GPIO_ACTIVE_HIGH>; + /* external antenna disabled */ + output-low; + line-name = "ant2"; + }; +}; + +&genet { + phy-handle = <&phy1>; + phy-mode = "rgmii-rxid"; + status = "okay"; +}; + +&genet_mdio { + phy1: ethernet-phy@0 { + /* No PHY interrupt */ + reg = <0x0>; + }; +}; + +/* uart0 communicates with the BT module */ +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_ctsrts_gpio30 &uart0_gpio32>; + uart-has-rtscts; +}; + +/* uart1 is mapped to the pin header */ +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&uart1_gpio14>; + status = "okay"; +}; + +&wifi_pwrseq { + reset-gpios = <&expgpio 1 GPIO_ACTIVE_LOW>; +}; diff --git a/dts/src/arm/broadcom/bcm2711-rpi.dtsi b/dts/src/arm/broadcom/bcm2711-rpi.dtsi new file mode 100644 index 0000000000..d233a191c1 --- /dev/null +++ b/dts/src/arm/broadcom/bcm2711-rpi.dtsi @@ -0,0 +1,83 @@ +// SPDX-License-Identifier: GPL-2.0 +#include "bcm2835-rpi.dtsi" + +#include <dt-bindings/power/raspberrypi-power.h> +#include <dt-bindings/reset/raspberrypi,firmware-reset.h> + +/ { + /* Will be filled by the bootloader */ + memory@0 { + device_type = "memory"; + reg = <0 0 0>; + }; + + aliases { + emmc2bus = &emmc2bus; + ethernet0 = &genet; + pcie0 = &pcie0; + blconfig = &blconfig; + }; +}; + +&firmware { + firmware_clocks: clocks { + compatible = "raspberrypi,firmware-clocks"; + #clock-cells = <1>; + }; + + expgpio: gpio { + compatible = "raspberrypi,firmware-gpio"; + gpio-controller; + #gpio-cells = <2>; + status = "okay"; + }; + + reset: reset { + compatible = "raspberrypi,firmware-reset"; + #reset-cells = <1>; + }; +}; + +&hdmi0 { + clocks = <&firmware_clocks 13>, <&firmware_clocks 14>, <&dvp 0>, <&clk_27MHz>; + clock-names = "hdmi", "bvb", "audio", "cec"; + wifi-2.4ghz-coexistence; +}; + +&hdmi1 { + clocks = <&firmware_clocks 13>, <&firmware_clocks 14>, <&dvp 1>, <&clk_27MHz>; + clock-names = "hdmi", "bvb", "audio", "cec"; + wifi-2.4ghz-coexistence; +}; + +&hvs { + clocks = <&firmware_clocks 4>; +}; + +&rmem { + /* + * RPi4's co-processor will copy the board's bootloader configuration + * into memory for the OS to consume. It'll also update this node with + * its placement information. + */ + blconfig: nvram@0 { + compatible = "raspberrypi,bootloader-config", "nvmem-rmem"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x0 0x0 0x0>; + no-map; + status = "disabled"; + }; +}; + +&v3d { + clocks = <&firmware_clocks 5>; +}; + +&vchiq { + interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>; +}; + +&xhci { + power-domains = <&power RPI_POWER_DOMAIN_USB>; +}; diff --git a/dts/src/arm/broadcom/bcm2711.dtsi b/dts/src/arm/broadcom/bcm2711.dtsi new file mode 100644 index 0000000000..22c7f15613 --- /dev/null +++ b/dts/src/arm/broadcom/bcm2711.dtsi @@ -0,0 +1,1186 @@ +// SPDX-License-Identifier: GPL-2.0 +#include "bcm283x.dtsi" + +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/soc/bcm2835-pm.h> + +/ { + compatible = "brcm,bcm2711"; + + #address-cells = <2>; + #size-cells = <1>; + + interrupt-parent = <&gicv2>; + + vc4: gpu { + compatible = "brcm,bcm2711-vc5"; + status = "disabled"; + }; + + clk_27MHz: clk-27M { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <27000000>; + clock-output-names = "27MHz-clock"; + }; + + clk_108MHz: clk-108M { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <108000000>; + clock-output-names = "108MHz-clock"; + }; + + soc { + /* + * Defined ranges: + * Common BCM283x peripherals + * BCM2711-specific peripherals + * ARM-local peripherals + */ + ranges = <0x7e000000 0x0 0xfe000000 0x01800000>, + <0x7c000000 0x0 0xfc000000 0x02000000>, + <0x40000000 0x0 0xff800000 0x00800000>; + /* Emulate a contiguous 30-bit address range for DMA */ + dma-ranges = <0xc0000000 0x0 0x00000000 0x40000000>; + + /* + * This node is the provider for the enable-method for + * bringing up secondary cores. + */ + local_intc: interrupt-controller@40000000 { + compatible = "brcm,bcm2836-l1-intc"; + reg = <0x40000000 0x100>; + }; + + gicv2: interrupt-controller@40041000 { + interrupt-controller; + #interrupt-cells = <3>; + compatible = "arm,gic-400"; + reg = <0x40041000 0x1000>, + <0x40042000 0x2000>, + <0x40044000 0x2000>, + <0x40046000 0x2000>; + interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | + IRQ_TYPE_LEVEL_HIGH)>; + }; + + avs_monitor: avs-monitor@7d5d2000 { + compatible = "brcm,bcm2711-avs-monitor", + "syscon", "simple-mfd"; + reg = <0x7d5d2000 0xf00>; + + thermal: thermal { + compatible = "brcm,bcm2711-thermal"; + #thermal-sensor-cells = <0>; + }; + }; + + dma: dma-controller@7e007000 { + compatible = "brcm,bcm2835-dma"; + reg = <0x7e007000 0xb00>; + interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>, + /* DMA lite 7 - 10 */ + <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "dma0", + "dma1", + "dma2", + "dma3", + "dma4", + "dma5", + "dma6", + "dma7", + "dma8", + "dma9", + "dma10"; + #dma-cells = <1>; + brcm,dma-channel-mask = <0x07f5>; + }; + + pm: watchdog@7e100000 { + compatible = "brcm,bcm2711-pm", "brcm,bcm2835-pm-wdt"; + #power-domain-cells = <1>; + #reset-cells = <1>; + reg = <0x7e100000 0x114>, + <0x7e00a000 0x24>, + <0x7ec11000 0x20>; + reg-names = "pm", "asb", "rpivid_asb"; + clocks = <&clocks BCM2835_CLOCK_V3D>, + <&clocks BCM2835_CLOCK_PERI_IMAGE>, + <&clocks BCM2835_CLOCK_H264>, + <&clocks BCM2835_CLOCK_ISP>; + clock-names = "v3d", "peri_image", "h264", "isp"; + system-power-controller; + }; + + rng@7e104000 { + compatible = "brcm,bcm2711-rng200"; + reg = <0x7e104000 0x28>; + }; + + uart2: serial@7e201400 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0x7e201400 0x200>; + interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clocks BCM2835_CLOCK_UART>, + <&clocks BCM2835_CLOCK_VPU>; + clock-names = "uartclk", "apb_pclk"; + arm,primecell-periphid = <0x00241011>; + status = "disabled"; + }; + + uart3: serial@7e201600 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0x7e201600 0x200>; + interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clocks BCM2835_CLOCK_UART>, + <&clocks BCM2835_CLOCK_VPU>; + clock-names = "uartclk", "apb_pclk"; + arm,primecell-periphid = <0x00241011>; + status = "disabled"; + }; + + uart4: serial@7e201800 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0x7e201800 0x200>; + interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clocks BCM2835_CLOCK_UART>, + <&clocks BCM2835_CLOCK_VPU>; + clock-names = "uartclk", "apb_pclk"; + arm,primecell-periphid = <0x00241011>; + status = "disabled"; + }; + + uart5: serial@7e201a00 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0x7e201a00 0x200>; + interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clocks BCM2835_CLOCK_UART>, + <&clocks BCM2835_CLOCK_VPU>; + clock-names = "uartclk", "apb_pclk"; + arm,primecell-periphid = <0x00241011>; + status = "disabled"; + }; + + spi3: spi@7e204600 { + compatible = "brcm,bcm2835-spi"; + reg = <0x7e204600 0x0200>; + interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clocks BCM2835_CLOCK_VPU>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi4: spi@7e204800 { + compatible = "brcm,bcm2835-spi"; + reg = <0x7e204800 0x0200>; + interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clocks BCM2835_CLOCK_VPU>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi5: spi@7e204a00 { + compatible = "brcm,bcm2835-spi"; + reg = <0x7e204a00 0x0200>; + interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clocks BCM2835_CLOCK_VPU>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi6: spi@7e204c00 { + compatible = "brcm,bcm2835-spi"; + reg = <0x7e204c00 0x0200>; + interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clocks BCM2835_CLOCK_VPU>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c3: i2c@7e205600 { + compatible = "brcm,bcm2711-i2c", "brcm,bcm2835-i2c"; + reg = <0x7e205600 0x200>; + interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clocks BCM2835_CLOCK_VPU>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c4: i2c@7e205800 { + compatible = "brcm,bcm2711-i2c", "brcm,bcm2835-i2c"; + reg = <0x7e205800 0x200>; + interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clocks BCM2835_CLOCK_VPU>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c5: i2c@7e205a00 { + compatible = "brcm,bcm2711-i2c", "brcm,bcm2835-i2c"; + reg = <0x7e205a00 0x200>; + interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clocks BCM2835_CLOCK_VPU>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c6: i2c@7e205c00 { + compatible = "brcm,bcm2711-i2c", "brcm,bcm2835-i2c"; + reg = <0x7e205c00 0x200>; + interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clocks BCM2835_CLOCK_VPU>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + pixelvalve0: pixelvalve@7e206000 { + compatible = "brcm,bcm2711-pixelvalve0"; + reg = <0x7e206000 0x100>; + interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + pixelvalve1: pixelvalve@7e207000 { + compatible = "brcm,bcm2711-pixelvalve1"; + reg = <0x7e207000 0x100>; + interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + pixelvalve2: pixelvalve@7e20a000 { + compatible = "brcm,bcm2711-pixelvalve2"; + reg = <0x7e20a000 0x100>; + interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + pwm1: pwm@7e20c800 { + compatible = "brcm,bcm2835-pwm"; + reg = <0x7e20c800 0x28>; + clocks = <&clocks BCM2835_CLOCK_PWM>; + assigned-clocks = <&clocks BCM2835_CLOCK_PWM>; + assigned-clock-rates = <10000000>; + #pwm-cells = <3>; + status = "disabled"; + }; + + pixelvalve4: pixelvalve@7e216000 { + compatible = "brcm,bcm2711-pixelvalve4"; + reg = <0x7e216000 0x100>; + interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + hvs: hvs@7e400000 { + compatible = "brcm,bcm2711-hvs"; + reg = <0x7e400000 0x8000>; + interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>; + }; + + pixelvalve3: pixelvalve@7ec12000 { + compatible = "brcm,bcm2711-pixelvalve3"; + reg = <0x7ec12000 0x100>; + interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + vec: vec@7ec13000 { + compatible = "brcm,bcm2711-vec"; + reg = <0x7ec13000 0x1000>; + clocks = <&clocks BCM2835_CLOCK_VEC>; + interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + dvp: clock@7ef00000 { + compatible = "brcm,brcm2711-dvp"; + reg = <0x7ef00000 0x10>; + clocks = <&clk_108MHz>; + #clock-cells = <1>; + #reset-cells = <1>; + }; + + aon_intr: interrupt-controller@7ef00100 { + compatible = "brcm,bcm2711-l2-intc", "brcm,l2-intc"; + reg = <0x7ef00100 0x30>; + interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + #interrupt-cells = <1>; + }; + + hdmi0: hdmi@7ef00700 { + compatible = "brcm,bcm2711-hdmi0"; + reg = <0x7ef00700 0x300>, + <0x7ef00300 0x200>, + <0x7ef00f00 0x80>, + <0x7ef00f80 0x80>, + <0x7ef01b00 0x200>, + <0x7ef01f00 0x400>, + <0x7ef00200 0x80>, + <0x7ef04300 0x100>, + <0x7ef20000 0x100>; + reg-names = "hdmi", + "dvp", + "phy", + "rm", + "packet", + "metadata", + "csc", + "cec", + "hd"; + clock-names = "hdmi", "bvb", "audio", "cec"; + resets = <&dvp 0>; + interrupt-parent = <&aon_intr>; + interrupts = <0>, <1>, <2>, + <3>, <4>, <5>; + interrupt-names = "cec-tx", "cec-rx", "cec-low", + "wakeup", "hpd-connected", "hpd-removed"; + ddc = <&ddc0>; + dmas = <&dma 10>; + dma-names = "audio-rx"; + status = "disabled"; + }; + + ddc0: i2c@7ef04500 { + compatible = "brcm,bcm2711-hdmi-i2c"; + reg = <0x7ef04500 0x100>, <0x7ef00b00 0x300>; + reg-names = "bsc", "auto-i2c"; + clock-frequency = <97500>; + status = "disabled"; + }; + + hdmi1: hdmi@7ef05700 { + compatible = "brcm,bcm2711-hdmi1"; + reg = <0x7ef05700 0x300>, + <0x7ef05300 0x200>, + <0x7ef05f00 0x80>, + <0x7ef05f80 0x80>, + <0x7ef06b00 0x200>, + <0x7ef06f00 0x400>, + <0x7ef00280 0x80>, + <0x7ef09300 0x100>, + <0x7ef20000 0x100>; + reg-names = "hdmi", + "dvp", + "phy", + "rm", + "packet", + "metadata", + "csc", + "cec", + "hd"; + ddc = <&ddc1>; + clock-names = "hdmi", "bvb", "audio", "cec"; + resets = <&dvp 1>; + interrupt-parent = <&aon_intr>; + interrupts = <8>, <7>, <6>, + <9>, <10>, <11>; + interrupt-names = "cec-tx", "cec-rx", "cec-low", + "wakeup", "hpd-connected", "hpd-removed"; + dmas = <&dma 17>; + dma-names = "audio-rx"; + status = "disabled"; + }; + + ddc1: i2c@7ef09500 { + compatible = "brcm,bcm2711-hdmi-i2c"; + reg = <0x7ef09500 0x100>, <0x7ef05b00 0x300>; + reg-names = "bsc", "auto-i2c"; + clock-frequency = <97500>; + status = "disabled"; + }; + }; + + /* + * emmc2 has different DMA constraints based on SoC revisions. It was + * moved into its own bus, so as for RPi4's firmware to update them. + * The firmware will find whether the emmc2bus alias is defined, and if + * so, it'll edit the dma-ranges property below accordingly. + */ + emmc2bus: emmc2bus { + compatible = "simple-bus"; + #address-cells = <2>; + #size-cells = <1>; + + ranges = <0x0 0x7e000000 0x0 0xfe000000 0x01800000>; + dma-ranges = <0x0 0xc0000000 0x0 0x00000000 0x40000000>; + + emmc2: mmc@7e340000 { + compatible = "brcm,bcm2711-emmc2"; + reg = <0x0 0x7e340000 0x100>; + interrupts = <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clocks BCM2711_CLOCK_EMMC2>; + status = "disabled"; + }; + }; + + arm-pmu { + compatible = "arm,cortex-a72-pmu", "arm,armv8-pmuv3"; + interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>; + interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | + IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | + IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | + IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | + IRQ_TYPE_LEVEL_LOW)>; + /* This only applies to the ARMv7 stub */ + arm,cpu-registers-not-fw-configured; + }; + + cpus: cpus { + #address-cells = <1>; + #size-cells = <0>; + enable-method = "brcm,bcm2836-smp"; // for ARM 32-bit + + /* Source for d/i-cache-line-size and d/i-cache-sets + * https://developer.arm.com/documentation/100095/0003 + * /Level-1-Memory-System/About-the-L1-memory-system?lang=en + * Source for d/i-cache-size + * https://www.raspberrypi.com/documentation/computers + * /processors.html#bcm2711 + */ + cpu0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a72"; + reg = <0>; + enable-method = "spin-table"; + cpu-release-addr = <0x0 0x000000d8>; + d-cache-size = <0x8000>; + d-cache-line-size = <64>; + d-cache-sets = <256>; // 32KiB(size)/64(line-size)=512ways/2-way set + i-cache-size = <0xc000>; + i-cache-line-size = <64>; + i-cache-sets = <256>; // 48KiB(size)/64(line-size)=768ways/3-way set + next-level-cache = <&l2>; + }; + + cpu1: cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a72"; + reg = <1>; + enable-method = "spin-table"; + cpu-release-addr = <0x0 0x000000e0>; + d-cache-size = <0x8000>; + d-cache-line-size = <64>; + d-cache-sets = <256>; // 32KiB(size)/64(line-size)=512ways/2-way set + i-cache-size = <0xc000>; + i-cache-line-size = <64>; + i-cache-sets = <256>; // 48KiB(size)/64(line-size)=768ways/3-way set + next-level-cache = <&l2>; + }; + + cpu2: cpu@2 { + device_type = "cpu"; + compatible = "arm,cortex-a72"; + reg = <2>; + enable-method = "spin-table"; + cpu-release-addr = <0x0 0x000000e8>; + d-cache-size = <0x8000>; + d-cache-line-size = <64>; + d-cache-sets = <256>; // 32KiB(size)/64(line-size)=512ways/2-way set + i-cache-size = <0xc000>; + i-cache-line-size = <64>; + i-cache-sets = <256>; // 48KiB(size)/64(line-size)=768ways/3-way set + next-level-cache = <&l2>; + }; + + cpu3: cpu@3 { + device_type = "cpu"; + compatible = "arm,cortex-a72"; + reg = <3>; + enable-method = "spin-table"; + cpu-release-addr = <0x0 0x000000f0>; + d-cache-size = <0x8000>; + d-cache-line-size = <64>; + d-cache-sets = <256>; // 32KiB(size)/64(line-size)=512ways/2-way set + i-cache-size = <0xc000>; + i-cache-line-size = <64>; + i-cache-sets = <256>; // 48KiB(size)/64(line-size)=768ways/3-way set + next-level-cache = <&l2>; + }; + + /* Source for d/i-cache-line-size and d/i-cache-sets + * https://developer.arm.com/documentation/100095/0003 + * /Level-2-Memory-System/About-the-L2-memory-system?lang=en + * Source for d/i-cache-size + * https://www.raspberrypi.com/documentation/computers + * /processors.html#bcm2711 + */ + l2: l2-cache0 { + compatible = "cache"; + cache-unified; + cache-size = <0x100000>; + cache-line-size = <64>; + cache-sets = <1024>; // 1MiB(size)/64(line-size)=16384ways/16-way set + cache-level = <2>; + }; + }; + + scb { + compatible = "simple-bus"; + #address-cells = <2>; + #size-cells = <1>; + + ranges = <0x0 0x7c000000 0x0 0xfc000000 0x03800000>, + <0x6 0x00000000 0x6 0x00000000 0x40000000>; + + pcie0: pcie@7d500000 { + compatible = "brcm,bcm2711-pcie"; + reg = <0x0 0x7d500000 0x9310>; + device_type = "pci"; + #address-cells = <3>; + #interrupt-cells = <1>; + #size-cells = <2>; + interrupts = <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "pcie", "msi"; + interrupt-map-mask = <0x0 0x0 0x0 0x7>; + interrupt-map = <0 0 0 1 &gicv2 GIC_SPI 143 + IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 2 &gicv2 GIC_SPI 144 + IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 3 &gicv2 GIC_SPI 145 + IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 4 &gicv2 GIC_SPI 146 + IRQ_TYPE_LEVEL_HIGH>; + msi-controller; + msi-parent = <&pcie0>; + + ranges = <0x02000000 0x0 0xf8000000 0x6 0x00000000 + 0x0 0x04000000>; + /* + * The wrapper around the PCIe block has a bug + * preventing it from accessing beyond the first 3GB of + * memory. + */ + dma-ranges = <0x02000000 0x0 0x00000000 0x0 0x00000000 + 0x0 0xc0000000>; + brcm,enable-ssc; + }; + + genet: ethernet@7d580000 { + compatible = "brcm,bcm2711-genet-v5"; + reg = <0x0 0x7d580000 0x10000>; + #address-cells = <0x1>; + #size-cells = <0x1>; + interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + + genet_mdio: mdio@e14 { + compatible = "brcm,genet-mdio-v5"; + reg = <0xe14 0x8>; + reg-names = "mdio"; + #address-cells = <0x1>; + #size-cells = <0x0>; + }; + }; + + xhci: usb@7e9c0000 { + compatible = "brcm,bcm2711-xhci", "brcm,xhci-brcm-v2"; + reg = <0x0 0x7e9c0000 0x100000>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH>; + /* DWC2 and this IP block share the same USB PHY, + * enabling both at the same time results in lockups. + * So keep this node disabled and let the bootloader + * decide which interface should be enabled. + */ + status = "disabled"; + }; + + v3d: gpu@7ec00000 { + compatible = "brcm,2711-v3d"; + reg = <0x0 0x7ec00000 0x4000>, + <0x0 0x7ec04000 0x4000>; + reg-names = "hub", "core0"; + + power-domains = <&pm BCM2835_POWER_DOMAIN_GRAFX_V3D>; + resets = <&pm BCM2835_RESET_V3D>; + interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>; + }; + }; +}; + +&clk_osc { + clock-frequency = <54000000>; +}; + +&clocks { + compatible = "brcm,bcm2711-cprman"; +}; + +&cpu_thermal { + coefficients = <(-487) 410040>; + thermal-sensors = <&thermal>; +}; + +&dsi0 { + interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>; +}; + +&dsi1 { + interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; + compatible = "brcm,bcm2711-dsi1"; +}; + +&gpio { + compatible = "brcm,bcm2711-gpio"; + interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>; + + gpio-ranges = <&gpio 0 0 58>; + + gpclk0_gpio49: gpclk0-gpio49 { + pin-gpclk { + pins = "gpio49"; + function = "alt1"; + bias-disable; + }; + }; + gpclk1_gpio50: gpclk1-gpio50 { + pin-gpclk { + pins = "gpio50"; + function = "alt1"; + bias-disable; + }; + }; + gpclk2_gpio51: gpclk2-gpio51 { + pin-gpclk { + pins = "gpio51"; + function = "alt1"; + bias-disable; + }; + }; + + i2c0_gpio46: i2c0-gpio46 { + pin-sda { + function = "alt0"; + pins = "gpio46"; + bias-pull-up; + }; + pin-scl { + function = "alt0"; + pins = "gpio47"; + bias-disable; + }; + }; + i2c1_gpio46: i2c1-gpio46 { + pin-sda { + function = "alt1"; + pins = "gpio46"; + bias-pull-up; + }; + pin-scl { + function = "alt1"; + pins = "gpio47"; + bias-disable; + }; + }; + i2c3_gpio2: i2c3-gpio2 { + pin-sda { + function = "alt5"; + pins = "gpio2"; + bias-pull-up; + }; + pin-scl { + function = "alt5"; + pins = "gpio3"; + bias-disable; + }; + }; + i2c3_gpio4: i2c3-gpio4 { + pin-sda { + function = "alt5"; + pins = "gpio4"; + bias-pull-up; + }; + pin-scl { + function = "alt5"; + pins = "gpio5"; + bias-disable; + }; + }; + i2c4_gpio6: i2c4-gpio6 { + pin-sda { + function = "alt5"; + pins = "gpio6"; + bias-pull-up; + }; + pin-scl { + function = "alt5"; + pins = "gpio7"; + bias-disable; + }; + }; + i2c4_gpio8: i2c4-gpio8 { + pin-sda { + function = "alt5"; + pins = "gpio8"; + bias-pull-up; + }; + pin-scl { + function = "alt5"; + pins = "gpio9"; + bias-disable; + }; + }; + i2c5_gpio10: i2c5-gpio10 { + pin-sda { + function = "alt5"; + pins = "gpio10"; + bias-pull-up; + }; + pin-scl { + function = "alt5"; + pins = "gpio11"; + bias-disable; + }; + }; + i2c5_gpio12: i2c5-gpio12 { + pin-sda { + function = "alt5"; + pins = "gpio12"; + bias-pull-up; + }; + pin-scl { + function = "alt5"; + pins = "gpio13"; + bias-disable; + }; + }; + i2c6_gpio0: i2c6-gpio0 { + pin-sda { + function = "alt5"; + pins = "gpio0"; + bias-pull-up; + }; + pin-scl { + function = "alt5"; + pins = "gpio1"; + bias-disable; + }; + }; + i2c6_gpio22: i2c6-gpio22 { + pin-sda { + function = "alt5"; + pins = "gpio22"; + bias-pull-up; + }; + pin-scl { + function = "alt5"; + pins = "gpio23"; + bias-disable; + }; + }; + i2c_slave_gpio8: i2c-slave-gpio8 { + pins-i2c-slave { + pins = "gpio8", + "gpio9", + "gpio10", + "gpio11"; + function = "alt3"; + }; + }; + + jtag_gpio48: jtag-gpio48 { + pins-jtag { + pins = "gpio48", + "gpio49", + "gpio50", + "gpio51", + "gpio52", + "gpio53"; + function = "alt4"; + }; + }; + + mii_gpio28: mii-gpio28 { + pins-mii { + pins = "gpio28", + "gpio29", + "gpio30", + "gpio31"; + function = "alt4"; + }; + }; + mii_gpio36: mii-gpio36 { + pins-mii { + pins = "gpio36", + "gpio37", + "gpio38", + "gpio39"; + function = "alt5"; + }; + }; + + pcm_gpio50: pcm-gpio50 { + pins-pcm { + pins = "gpio50", + "gpio51", + "gpio52", + "gpio53"; + function = "alt2"; + }; + }; + + pwm0_0_gpio12: pwm0-0-gpio12 { + pin-pwm { + pins = "gpio12"; + function = "alt0"; + bias-disable; + }; + }; + pwm0_0_gpio18: pwm0-0-gpio18 { + pin-pwm { + pins = "gpio18"; + function = "alt5"; + bias-disable; + }; + }; + pwm1_0_gpio40: pwm1-0-gpio40 { + pin-pwm { + pins = "gpio40"; + function = "alt0"; + bias-disable; + }; + }; + pwm0_1_gpio13: pwm0-1-gpio13 { + pin-pwm { + pins = "gpio13"; + function = "alt0"; + bias-disable; + }; + }; + pwm0_1_gpio19: pwm0-1-gpio19 { + pin-pwm { + pins = "gpio19"; + function = "alt5"; + bias-disable; + }; + }; + pwm1_1_gpio41: pwm1-1-gpio41 { + pin-pwm { + pins = "gpio41"; + function = "alt0"; + bias-disable; + }; + }; + pwm0_1_gpio45: pwm0-1-gpio45 { + pin-pwm { + pins = "gpio45"; + function = "alt0"; + bias-disable; + }; + }; + pwm0_0_gpio52: pwm0-0-gpio52 { + pin-pwm { + pins = "gpio52"; + function = "alt1"; + bias-disable; + }; + }; + pwm0_1_gpio53: pwm0-1-gpio53 { + pin-pwm { + pins = "gpio53"; + function = "alt1"; + bias-disable; + }; + }; + + rgmii_gpio35: rgmii-gpio35 { + pin-start-stop { + pins = "gpio35"; + function = "alt4"; + }; + pin-rx-ok { + pins = "gpio36"; + function = "alt4"; + }; + }; + rgmii_irq_gpio34: rgmii-irq-gpio34 { + pin-irq { + pins = "gpio34"; + function = "alt5"; + }; + }; + rgmii_irq_gpio39: rgmii-irq-gpio39 { + pin-irq { + pins = "gpio39"; + function = "alt4"; + }; + }; + rgmii_mdio_gpio28: rgmii-mdio-gpio28 { + pins-mdio { + pins = "gpio28", + "gpio29"; + function = "alt5"; + }; + }; + rgmii_mdio_gpio37: rgmii-mdio-gpio37 { + pins-mdio { + pins = "gpio37", + "gpio38"; + function = "alt4"; + }; + }; + + spi0_gpio46: spi0-gpio46 { + pins-spi { + pins = "gpio46", + "gpio47", + "gpio48", + "gpio49"; + function = "alt2"; + }; + }; + spi2_gpio46: spi2-gpio46 { + pins-spi { + pins = "gpio46", + "gpio47", + "gpio48", + "gpio49", + "gpio50"; + function = "alt5"; + }; + }; + spi3_gpio0: spi3-gpio0 { + pins-spi { + pins = "gpio0", + "gpio1", + "gpio2", + "gpio3"; + function = "alt3"; + }; + }; + spi4_gpio4: spi4-gpio4 { + pins-spi { + pins = "gpio4", + "gpio5", + "gpio6", + "gpio7"; + function = "alt3"; + }; + }; + spi5_gpio12: spi5-gpio12 { + pins-spi { + pins = "gpio12", + "gpio13", + "gpio14", + "gpio15"; + function = "alt3"; + }; + }; + spi6_gpio18: spi6-gpio18 { + pins-spi { + pins = "gpio18", + "gpio19", + "gpio20", + "gpio21"; + function = "alt3"; + }; + }; + + uart2_gpio0: uart2-gpio0 { + pin-tx { + pins = "gpio0"; + function = "alt4"; + bias-disable; + }; + pin-rx { + pins = "gpio1"; + function = "alt4"; + bias-pull-up; + }; + }; + uart2_ctsrts_gpio2: uart2-ctsrts-gpio2 { + pin-cts { + pins = "gpio2"; + function = "alt4"; + bias-pull-up; + }; + pin-rts { + pins = "gpio3"; + function = "alt4"; + bias-disable; + }; + }; + uart3_gpio4: uart3-gpio4 { + pin-tx { + pins = "gpio4"; + function = "alt4"; + bias-disable; + }; + pin-rx { + pins = "gpio5"; + function = "alt4"; + bias-pull-up; + }; + }; + uart3_ctsrts_gpio6: uart3-ctsrts-gpio6 { + pin-cts { + pins = "gpio6"; + function = "alt4"; + bias-pull-up; + }; + pin-rts { + pins = "gpio7"; + function = "alt4"; + bias-disable; + }; + }; + uart4_gpio8: uart4-gpio8 { + pin-tx { + pins = "gpio8"; + function = "alt4"; + bias-disable; + }; + pin-rx { + pins = "gpio9"; + function = "alt4"; + bias-pull-up; + }; + }; + uart4_ctsrts_gpio10: uart4-ctsrts-gpio10 { + pin-cts { + pins = "gpio10"; + function = "alt4"; + bias-pull-up; + }; + pin-rts { + pins = "gpio11"; + function = "alt4"; + bias-disable; + }; + }; + uart5_gpio12: uart5-gpio12 { + pin-tx { + pins = "gpio12"; + function = "alt4"; + bias-disable; + }; + pin-rx { + pins = "gpio13"; + function = "alt4"; + bias-pull-up; + }; + }; + uart5_ctsrts_gpio14: uart5-ctsrts-gpio14 { + pin-cts { + pins = "gpio14"; + function = "alt4"; + bias-pull-up; + }; + pin-rts { + pins = "gpio15"; + function = "alt4"; + bias-disable; + }; + }; +}; + +&rmem { + #address-cells = <2>; +}; + +&cma { + /* + * arm64 reserves the CMA by default somewhere in ZONE_DMA32, + * that's not good enough for the BCM2711 as some devices can + * only address the lower 1G of memory (ZONE_DMA). + */ + alloc-ranges = <0x0 0x00000000 0x40000000>; +}; + +&i2c0 { + compatible = "brcm,bcm2711-i2c", "brcm,bcm2835-i2c"; + interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>; +}; + +&i2c1 { + compatible = "brcm,bcm2711-i2c", "brcm,bcm2835-i2c"; + interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>; +}; + +&mailbox { + interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>; +}; + +&sdhci { + interrupts = <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>; +}; + +&sdhost { + interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>; +}; + +&spi { + interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>; +}; + +&spi1 { + interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>; +}; + +&spi2 { + interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>; +}; + +&system_timer { + interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>; +}; + +&txp { + interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>; +}; + +&uart0 { + interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>; +}; + +&uart1 { + interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>; +}; + +&usb { + interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>; +}; + +&vec { + compatible = "brcm,bcm2711-vec"; + interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>; +}; diff --git a/dts/src/arm/broadcom/bcm28155-ap.dts b/dts/src/arm/broadcom/bcm28155-ap.dts new file mode 100644 index 0000000000..2f3634545e --- /dev/null +++ b/dts/src/arm/broadcom/bcm28155-ap.dts @@ -0,0 +1,112 @@ +// SPDX-License-Identifier: GPL-2.0-only +// Copyright (C) 2013 Broadcom Corporation + +/dts-v1/; + +#include <dt-bindings/gpio/gpio.h> + +#include "bcm11351.dtsi" + +/ { + model = "BCM28155 AP board"; + compatible = "brcm,bcm28155-ap", "brcm,bcm11351"; + + memory@80000000 { + device_type = "memory"; + reg = <0x80000000 0x40000000>; /* 1 GB */ + }; +}; + +&bsc1 { + clock-frequency = <400000>; + status = "okay"; +}; + +&bsc2 { + clock-frequency = <400000>; + status = "okay"; +}; + +&bsc3 { + clock-frequency = <400000>; + status = "okay"; +}; + +&pmu_bsc { + clock-frequency = <100000>; + status = "okay"; + + pmu: pmu@8 { + reg = <0x08>; + }; +}; + +&pwm { + status = "okay"; +}; + +&sdio2 { + non-removable; + max-frequency = <48000000>; + vmmc-supply = <&camldo1_reg>; + vqmmc-supply = <&iosr1_reg>; + status = "okay"; +}; + +&sdio4 { + max-frequency = <48000000>; + cd-gpios = <&gpio 14 GPIO_ACTIVE_LOW>; + vmmc-supply = <&sdldo_reg>; + vqmmc-supply = <&sdxldo_reg>; + status = "okay"; +}; + +&uartb { + status = "okay"; +}; + +&usbotg { + vusb_d-supply = <&usbldo_reg>; + vusb_a-supply = <&iosr1_reg>; + status = "okay"; +}; + +&usbphy { + status = "okay"; +}; + +#include "bcm59056.dtsi" + +&pmu { + compatible = "brcm,bcm59056"; + interrupts = <GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH>; + regulators { + camldo1_reg: camldo1 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + sdldo_reg: sdldo { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + }; + + sdxldo_reg: sdxldo { + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <3300000>; + }; + + usbldo_reg: usbldo { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + iosr1_reg: iosr1 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + }; +}; diff --git a/dts/src/arm/broadcom/bcm2835-common.dtsi b/dts/src/arm/broadcom/bcm2835-common.dtsi new file mode 100644 index 0000000000..9261b67dbe --- /dev/null +++ b/dts/src/arm/broadcom/bcm2835-common.dtsi @@ -0,0 +1,208 @@ +// SPDX-License-Identifier: GPL-2.0 + +/* This include file covers the common peripherals and configuration between + * bcm2835, bcm2836 and bcm2837 implementations. + */ + +/ { + interrupt-parent = <&intc>; + + soc { + dma: dma-controller@7e007000 { + compatible = "brcm,bcm2835-dma"; + reg = <0x7e007000 0xf00>; + interrupts = <1 16>, + <1 17>, + <1 18>, + <1 19>, + <1 20>, + <1 21>, + <1 22>, + <1 23>, + <1 24>, + <1 25>, + <1 26>, + /* dma channel 11-14 share one irq */ + <1 27>, + <1 27>, + <1 27>, + <1 27>, + /* unused shared irq for all channels */ + <1 28>; + interrupt-names = "dma0", + "dma1", + "dma2", + "dma3", + "dma4", + "dma5", + "dma6", + "dma7", + "dma8", + "dma9", + "dma10", + "dma11", + "dma12", + "dma13", + "dma14", + "dma-shared-all"; + #dma-cells = <1>; + brcm,dma-channel-mask = <0x7f35>; + }; + + intc: interrupt-controller@7e00b200 { + compatible = "brcm,bcm2835-armctrl-ic"; + reg = <0x7e00b200 0x200>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + pm: watchdog@7e100000 { + compatible = "brcm,bcm2835-pm", "brcm,bcm2835-pm-wdt"; + #power-domain-cells = <1>; + #reset-cells = <1>; + reg = <0x7e100000 0x114>, + <0x7e00a000 0x24>; + reg-names = "pm", "asb"; + clocks = <&clocks BCM2835_CLOCK_V3D>, + <&clocks BCM2835_CLOCK_PERI_IMAGE>, + <&clocks BCM2835_CLOCK_H264>, + <&clocks BCM2835_CLOCK_ISP>; + clock-names = "v3d", "peri_image", "h264", "isp"; + system-power-controller; + }; + + rng@7e104000 { + compatible = "brcm,bcm2835-rng"; + reg = <0x7e104000 0x10>; + interrupts = <2 29>; + }; + + pixelvalve@7e206000 { + compatible = "brcm,bcm2835-pixelvalve0"; + reg = <0x7e206000 0x100>; + interrupts = <2 13>; /* pwa0 */ + }; + + pixelvalve@7e207000 { + compatible = "brcm,bcm2835-pixelvalve1"; + reg = <0x7e207000 0x100>; + interrupts = <2 14>; /* pwa1 */ + }; + + thermal: thermal@7e212000 { + compatible = "brcm,bcm2835-thermal"; + reg = <0x7e212000 0x8>; + clocks = <&clocks BCM2835_CLOCK_TSENS>; + #thermal-sensor-cells = <0>; + status = "disabled"; + }; + + i2c2: i2c@7e805000 { + compatible = "brcm,bcm2835-i2c"; + reg = <0x7e805000 0x1000>; + interrupts = <2 21>; + clocks = <&clocks BCM2835_CLOCK_VPU>; + #address-cells = <1>; + #size-cells = <0>; + status = "okay"; + }; + + vec: vec@7e806000 { + compatible = "brcm,bcm2835-vec"; + reg = <0x7e806000 0x1000>; + clocks = <&clocks BCM2835_CLOCK_VEC>; + interrupts = <2 27>; + status = "disabled"; + }; + + pixelvalve@7e807000 { + compatible = "brcm,bcm2835-pixelvalve2"; + reg = <0x7e807000 0x100>; + interrupts = <2 10>; /* pixelvalve */ + }; + + hdmi: hdmi@7e902000 { + compatible = "brcm,bcm2835-hdmi"; + reg = <0x7e902000 0x600>, + <0x7e808000 0x100>; + interrupts = <2 8>, <2 9>; + ddc = <&i2c2>; + clocks = <&clocks BCM2835_PLLH_PIX>, + <&clocks BCM2835_CLOCK_HSM>; + clock-names = "pixel", "hdmi"; + dmas = <&dma 17>; + dma-names = "audio-rx"; + status = "disabled"; + }; + + v3d: v3d@7ec00000 { + compatible = "brcm,bcm2835-v3d"; + reg = <0x7ec00000 0x1000>; + interrupts = <1 10>; + }; + + vc4: gpu { + compatible = "brcm,bcm2835-vc4"; + }; + }; +}; + +&cpu_thermal { + thermal-sensors = <&thermal>; +}; + +&gpio { + i2c_slave_gpio18: i2c-slave-gpio18 { + brcm,pins = <18 19 20 21>; + brcm,function = <BCM2835_FSEL_ALT3>; + }; + + jtag_gpio4: jtag-gpio4 { + brcm,pins = <4 5 6 12 13>; + brcm,function = <BCM2835_FSEL_ALT5>; + }; + + pwm0_gpio12: pwm0-gpio12 { + brcm,pins = <12>; + brcm,function = <BCM2835_FSEL_ALT0>; + }; + pwm0_gpio18: pwm0-gpio18 { + brcm,pins = <18>; + brcm,function = <BCM2835_FSEL_ALT5>; + }; + pwm0_gpio40: pwm0-gpio40 { + brcm,pins = <40>; + brcm,function = <BCM2835_FSEL_ALT0>; + }; + pwm1_gpio13: pwm1-gpio13 { + brcm,pins = <13>; + brcm,function = <BCM2835_FSEL_ALT0>; + }; + pwm1_gpio19: pwm1-gpio19 { + brcm,pins = <19>; + brcm,function = <BCM2835_FSEL_ALT5>; + }; + pwm1_gpio41: pwm1-gpio41 { + brcm,pins = <41>; + brcm,function = <BCM2835_FSEL_ALT0>; + }; + pwm1_gpio45: pwm1-gpio45 { + brcm,pins = <45>; + brcm,function = <BCM2835_FSEL_ALT0>; + }; +}; + +&i2s { + dmas = <&dma 2>, <&dma 3>; + dma-names = "tx", "rx"; +}; + +&sdhost { + dmas = <&dma 13>; + dma-names = "rx-tx"; +}; + +&spi { + dmas = <&dma 6>, <&dma 7>; + dma-names = "tx", "rx"; +}; diff --git a/dts/src/arm/broadcom/bcm2835-rpi-a-plus.dts b/dts/src/arm/broadcom/bcm2835-rpi-a-plus.dts new file mode 100644 index 0000000000..069b48272a --- /dev/null +++ b/dts/src/arm/broadcom/bcm2835-rpi-a-plus.dts @@ -0,0 +1,130 @@ +// SPDX-License-Identifier: GPL-2.0 +/dts-v1/; +#include "bcm2835.dtsi" +#include "bcm2835-rpi.dtsi" +#include "bcm2835-rpi-common.dtsi" +#include "bcm283x-rpi-led-deprecated.dtsi" +#include "bcm283x-rpi-usb-host.dtsi" + +/ { + compatible = "raspberrypi,model-a-plus", "brcm,bcm2835"; + model = "Raspberry Pi Model A+"; + + memory@0 { + device_type = "memory"; + reg = <0 0x10000000>; + }; +}; + +&gpio { + /* + * This is based on the unreleased schematic for the Model A+. + * + * Legend: + * "FOO" = GPIO line named "FOO" on the schematic + * "FOO_N" = GPIO line named "FOO" on schematic, active low + */ + gpio-line-names = "ID_SDA", + "ID_SCL", + "SDA1", + "SCL1", + "GPIO_GCLK", + "GPIO5", + "GPIO6", + "SPI_CE1_N", + "SPI_CE0_N", + "SPI_MISO", + "SPI_MOSI", + "SPI_SCLK", + "GPIO12", + "GPIO13", + /* Serial port */ + "TXD0", + "RXD0", + "GPIO16", + "GPIO17", + "GPIO18", + "GPIO19", + "GPIO20", + "GPIO21", + "GPIO22", + "GPIO23", + "GPIO24", + "GPIO25", + "GPIO26", + "GPIO27", + "SDA0", + "SCL0", + "", /* GPIO30 */ + "", /* GPIO31 */ + "CAM_GPIO1", /* GPIO32 */ + "", /* GPIO33 */ + "", /* GPIO34 */ + "PWR_LOW_N", /* GPIO35 */ + "", /* GPIO36 */ + "", /* GPIO37 */ + "USB_LIMIT", /* GPIO38 */ + "", /* GPIO39 */ + "PWM0_OUT", /* GPIO40 */ + "CAM_GPIO0", /* GPIO41 */ + "", /* GPIO42 */ + "", /* GPIO43 */ + "", /* GPIO44 */ + "PWM1_OUT", /* GPIO45 */ + "HDMI_HPD_N", + "STATUS_LED", + /* Used by SD Card */ + "SD_CLK_R", + "SD_CMD_R", + "SD_DATA0_R", + "SD_DATA1_R", + "SD_DATA2_R", + "SD_DATA3_R"; + + pinctrl-names = "default"; + pinctrl-0 = <&gpioout &alt0 &i2s_alt0>; + + /* I2S interface */ + i2s_alt0: i2s_alt0 { + brcm,pins = <18 19 20 21>; + brcm,function = <BCM2835_FSEL_ALT0>; + }; +}; + +&hdmi { + hpd-gpios = <&gpio 46 GPIO_ACTIVE_LOW>; + power-domains = <&power RPI_POWER_DOMAIN_HDMI>; + status = "okay"; +}; + +&led_act { + gpios = <&gpio 47 GPIO_ACTIVE_HIGH>; +}; + +&leds { + led-pwr { + label = "PWR"; + gpios = <&gpio 35 GPIO_ACTIVE_HIGH>; + default-state = "keep"; + linux,default-trigger = "default-on"; + }; +}; + +&pwm { + pinctrl-names = "default"; + pinctrl-0 = <&pwm0_gpio40 &pwm1_gpio45>; + status = "okay"; +}; + +&sdhost { + pinctrl-names = "default"; + pinctrl-0 = <&sdhost_gpio48>; + bus-width = <4>; + status = "okay"; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_gpio14>; + status = "okay"; +}; diff --git a/dts/src/arm/broadcom/bcm2835-rpi-a.dts b/dts/src/arm/broadcom/bcm2835-rpi-a.dts new file mode 100644 index 0000000000..2726c00431 --- /dev/null +++ b/dts/src/arm/broadcom/bcm2835-rpi-a.dts @@ -0,0 +1,123 @@ +// SPDX-License-Identifier: GPL-2.0 +/dts-v1/; +#include "bcm2835.dtsi" +#include "bcm2835-rpi.dtsi" +#include "bcm2835-rpi-common.dtsi" +#include "bcm283x-rpi-led-deprecated.dtsi" +#include "bcm283x-rpi-usb-host.dtsi" + +/ { + compatible = "raspberrypi,model-a", "brcm,bcm2835"; + model = "Raspberry Pi Model A"; + + memory@0 { + device_type = "memory"; + reg = <0 0x10000000>; + }; +}; + +&gpio { + /* + * Taken from Raspberry-Pi-Rev-1.0-Model-AB-Schematics.pdf + * RPI00021 sheet 02 + * + * Legend: + * "FOO" = GPIO line named "FOO" on the schematic + * "FOO_N" = GPIO line named "FOO" on schematic, active low + */ + gpio-line-names = "SDA0", + "SCL0", + "SDA1", + "SCL1", + "GPIO_GCLK", + "CAM_GPIO1", + "LAN_RUN", + "SPI_CE1_N", + "SPI_CE0_N", + "SPI_MISO", + "SPI_MOSI", + "SPI_SCLK", + "", /* GPIO12 */ + "", /* GPIO13 */ + /* Serial port */ + "TXD0", + "RXD0", + "STATUS_LED_N", + "GPIO17", + "GPIO18", + "", /* GPIO19 */ + "", /* GPIO20 */ + "GPIO21", + "GPIO22", + "GPIO23", + "GPIO24", + "GPIO25", + "", /* GPIO26 */ + "CAM_GPIO0", + /* Binary number representing build/revision */ + "CONFIG0", + "CONFIG1", + "CONFIG2", + "CONFIG3", + "", /* GPIO32 */ + "", /* GPIO33 */ + "", /* GPIO34 */ + "", /* GPIO35 */ + "", /* GPIO36 */ + "", /* GPIO37 */ + "", /* GPIO38 */ + "", /* GPIO39 */ + "PWM0_OUT", + "", /* GPIO41 */ + "", /* GPIO42 */ + "", /* GPIO43 */ + "", /* GPIO44 */ + "PWM1_OUT", + "HDMI_HPD_P", + "SD_CARD_DET", + /* Used by SD Card */ + "SD_CLK_R", + "SD_CMD_R", + "SD_DATA0_R", + "SD_DATA1_R", + "SD_DATA2_R", + "SD_DATA3_R"; + + pinctrl-names = "default"; + pinctrl-0 = <&gpioout &alt0 &i2s_alt2>; + + /* I2S interface */ + i2s_alt2: i2s_alt2 { + brcm,pins = <28 29 30 31>; + brcm,function = <BCM2835_FSEL_ALT2>; + }; +}; + +&hdmi { + hpd-gpios = <&gpio 46 GPIO_ACTIVE_HIGH>; + power-domains = <&power RPI_POWER_DOMAIN_HDMI>; + status = "okay"; +}; + +&led_act { + gpios = <&gpio 16 GPIO_ACTIVE_LOW>; +}; + +&pwm { + pinctrl-names = "default"; + pinctrl-0 = <&pwm0_gpio40 &pwm1_gpio45>; + status = "okay"; +}; + +&sdhost { + pinctrl-names = "default"; + pinctrl-0 = <&sdhost_gpio48>; + bus-width = <4>; + status = "okay"; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_gpio14>; + status = "okay"; +}; diff --git a/dts/src/arm/broadcom/bcm2835-rpi-b-plus.dts b/dts/src/arm/broadcom/bcm2835-rpi-b-plus.dts new file mode 100644 index 0000000000..c57b999a45 --- /dev/null +++ b/dts/src/arm/broadcom/bcm2835-rpi-b-plus.dts @@ -0,0 +1,132 @@ +// SPDX-License-Identifier: GPL-2.0 +/dts-v1/; +#include "bcm2835.dtsi" +#include "bcm2835-rpi.dtsi" +#include "bcm2835-rpi-common.dtsi" +#include "bcm283x-rpi-led-deprecated.dtsi" +#include "bcm283x-rpi-smsc9514.dtsi" +#include "bcm283x-rpi-usb-host.dtsi" + +/ { + compatible = "raspberrypi,model-b-plus", "brcm,bcm2835"; + model = "Raspberry Pi Model B+"; + + memory@0 { + device_type = "memory"; + reg = <0 0x20000000>; + }; +}; + +&gpio { + /* + * Taken from Raspberry-Pi-B-Plus-V1.2-Schematics.pdf + * RPI-BPLUS sheet 1 + * + * Legend: + * "FOO" = GPIO line named "FOO" on the schematic + * "FOO_N" = GPIO line named "FOO" on schematic, active low + */ + gpio-line-names = "ID_SDA", + "ID_SCL", + "SDA1", + "SCL1", + "GPIO_GCLK", + "GPIO5", + "GPIO6", + "SPI_CE1_N", + "SPI_CE0_N", + "SPI_MISO", + "SPI_MOSI", + "SPI_SCLK", + "GPIO12", + "GPIO13", + /* Serial port */ + "TXD0", + "RXD0", + "GPIO16", + "GPIO17", + "GPIO18", + "GPIO19", + "GPIO20", + "GPIO21", + "GPIO22", + "GPIO23", + "GPIO24", + "GPIO25", + "GPIO26", + "GPIO27", + "SDA0", + "SCL0", + "", /* GPIO30 */ + "LAN_RUN", /* GPIO31 */ + "CAM_GPIO1", /* GPIO32 */ + "", /* GPIO33 */ + "", /* GPIO34 */ + "PWR_LOW_N", /* GPIO35 */ + "", /* GPIO36 */ + "", /* GPIO37 */ + "USB_LIMIT", /* GPIO38 */ + "", /* GPIO39 */ + "PWM0_OUT", /* GPIO40 */ + "CAM_GPIO0", /* GPIO41 */ + "", /* GPIO42 */ + "", /* GPIO43 */ + "ETH_CLK", /* GPIO44 */ + "PWM1_OUT", /* GPIO45 */ + "HDMI_HPD_N", + "STATUS_LED", + /* Used by SD Card */ + "SD_CLK_R", + "SD_CMD_R", + "SD_DATA0_R", + "SD_DATA1_R", + "SD_DATA2_R", + "SD_DATA3_R"; + + pinctrl-names = "default"; + pinctrl-0 = <&gpioout &alt0 &i2s_alt0>; + + /* I2S interface */ + i2s_alt0: i2s_alt0 { + brcm,pins = <18 19 20 21>; + brcm,function = <BCM2835_FSEL_ALT0>; + }; +}; + +&hdmi { + hpd-gpios = <&gpio 46 GPIO_ACTIVE_LOW>; + power-domains = <&power RPI_POWER_DOMAIN_HDMI>; + status = "okay"; +}; + +&led_act { + gpios = <&gpio 47 GPIO_ACTIVE_HIGH>; +}; + +&leds { + led-pwr { + label = "PWR"; + gpios = <&gpio 35 GPIO_ACTIVE_HIGH>; + default-state = "keep"; + linux,default-trigger = "default-on"; + }; +}; + +&pwm { + pinctrl-names = "default"; + pinctrl-0 = <&pwm0_gpio40 &pwm1_gpio45>; + status = "okay"; +}; + +&sdhost { + pinctrl-names = "default"; + pinctrl-0 = <&sdhost_gpio48>; + bus-width = <4>; + status = "okay"; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_gpio14>; + status = "okay"; +}; diff --git a/dts/src/arm/broadcom/bcm2835-rpi-b-rev2.dts b/dts/src/arm/broadcom/bcm2835-rpi-b-rev2.dts new file mode 100644 index 0000000000..ae6d3a9586 --- /dev/null +++ b/dts/src/arm/broadcom/bcm2835-rpi-b-rev2.dts @@ -0,0 +1,123 @@ +// SPDX-License-Identifier: GPL-2.0 +/dts-v1/; +#include "bcm2835.dtsi" +#include "bcm2835-rpi.dtsi" +#include "bcm2835-rpi-common.dtsi" +#include "bcm283x-rpi-led-deprecated.dtsi" +#include "bcm283x-rpi-smsc9512.dtsi" +#include "bcm283x-rpi-usb-host.dtsi" + +/ { + compatible = "raspberrypi,model-b-rev2", "brcm,bcm2835"; + model = "Raspberry Pi Model B rev2"; + + memory@0 { + device_type = "memory"; + reg = <0 0x10000000>; + }; +}; + +&gpio { + /* + * Taken from Raspberry-Pi-Rev-2.0-Model-AB-Schematics.pdf + * RPI00022 sheet 02 + * + * Legend: + * "FOO" = GPIO line named "FOO" on the schematic + * "FOO_N" = GPIO line named "FOO" on schematic, active low + */ + gpio-line-names = "SDA0", + "SCL0", + "SDA1", + "SCL1", + "GPIO_GCLK", + "CAM_CLK", + "LAN_RUN", + "SPI_CE1_N", + "SPI_CE0_N", + "SPI_MISO", + "SPI_MOSI", + "SPI_SCLK", + "", /* GPIO12 */ + "", /* GPIO13 */ + /* Serial port */ + "TXD0", + "RXD0", + "STATUS_LED_N", + "GPIO17", + "GPIO18", + "", /* GPIO19 */ + "", /* GPIO20 */ + "CAM_GPIO", + "GPIO22", + "GPIO23", + "GPIO24", + "GPIO25", + "", /* GPIO26 */ + "GPIO27", + "GPIO28", + "GPIO29", + "GPIO30", + "GPIO31", + "", /* GPIO32 */ + "", /* GPIO33 */ + "", /* GPIO34 */ + "", /* GPIO35 */ + "", /* GPIO36 */ + "", /* GPIO37 */ + "", /* GPIO38 */ + "", /* GPIO39 */ + "PWM0_OUT", + "", /* GPIO41 */ + "", /* GPIO42 */ + "", /* GPIO43 */ + "", /* GPIO44 */ + "PWM1_OUT", + "HDMI_HPD_P", + "SD_CARD_DET", + /* Used by SD Card */ + "SD_CLK_R", + "SD_CMD_R", + "SD_DATA0_R", + "SD_DATA1_R", + "SD_DATA2_R", + "SD_DATA3_R"; + + pinctrl-names = "default"; + pinctrl-0 = <&gpioout &alt0 &i2s_alt2>; + + /* I2S interface */ + i2s_alt2: i2s_alt2 { + brcm,pins = <28 29 30 31>; + brcm,function = <BCM2835_FSEL_ALT2>; + }; +}; + +&hdmi { + hpd-gpios = <&gpio 46 GPIO_ACTIVE_HIGH>; + power-domains = <&power RPI_POWER_DOMAIN_HDMI>; + status = "okay"; +}; + +&led_act { + gpios = <&gpio 16 GPIO_ACTIVE_LOW>; +}; + +&pwm { + pinctrl-names = "default"; + pinctrl-0 = <&pwm0_gpio40 &pwm1_gpio45>; + status = "okay"; +}; + +&sdhost { + pinctrl-names = "default"; + pinctrl-0 = <&sdhost_gpio48>; + bus-width = <4>; + status = "okay"; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_gpio14>; + status = "okay"; +}; diff --git a/dts/src/arm/broadcom/bcm2835-rpi-b.dts b/dts/src/arm/broadcom/bcm2835-rpi-b.dts new file mode 100644 index 0000000000..72764be75a --- /dev/null +++ b/dts/src/arm/broadcom/bcm2835-rpi-b.dts @@ -0,0 +1,117 @@ +// SPDX-License-Identifier: GPL-2.0 +/dts-v1/; +#include "bcm2835.dtsi" +#include "bcm2835-rpi.dtsi" +#include "bcm2835-rpi-common.dtsi" +#include "bcm283x-rpi-led-deprecated.dtsi" +#include "bcm283x-rpi-smsc9512.dtsi" +#include "bcm283x-rpi-usb-host.dtsi" + +/ { + compatible = "raspberrypi,model-b", "brcm,bcm2835"; + model = "Raspberry Pi Model B"; + + memory@0 { + device_type = "memory"; + reg = <0 0x10000000>; + }; +}; + +&gpio { + /* + * Taken from Raspberry-Pi-Rev-1.0-Model-AB-Schematics.pdf + * RPI00021 sheet 02 + * + * Legend: + * "FOO" = GPIO line named "FOO" on the schematic + * "FOO_N" = GPIO line named "FOO" on schematic, active low + */ + gpio-line-names = "SDA0", + "SCL0", + "SDA1", + "SCL1", + "GPIO_GCLK", + "CAM_GPIO1", + "LAN_RUN", + "SPI_CE1_N", + "SPI_CE0_N", + "SPI_MISO", + "SPI_MOSI", + "SPI_SCLK", + "", /* GPIO12 */ + "", /* GPIO13 */ + /* Serial port */ + "TXD0", + "RXD0", + "STATUS_LED_N", + "GPIO17", + "GPIO18", + "", /* GPIO19 */ + "", /* GPIO20 */ + "CAM_GPIO0", + "GPIO22", + "GPIO23", + "GPIO24", + "GPIO25", + "", /* GPIO26 */ + "GPIO27", + "GPIO28", + "GPIO29", + "GPIO30", + "GPIO31", + "", /* GPIO32 */ + "", /* GPIO33 */ + "", /* GPIO34 */ + "", /* GPIO35 */ + "", /* GPIO36 */ + "", /* GPIO37 */ + "", /* GPIO38 */ + "", /* GPIO39 */ + "PWM0_OUT", + "", /* GPIO41 */ + "", /* GPIO42 */ + "", /* GPIO43 */ + "", /* GPIO44 */ + "PWM1_OUT", + "HDMI_HPD_P", + "SD_CARD_DET", + /* Used by SD Card */ + "SD_CLK_R", + "SD_CMD_R", + "SD_DATA0_R", + "SD_DATA1_R", + "SD_DATA2_R", + "SD_DATA3_R"; + + pinctrl-names = "default"; + pinctrl-0 = <&gpioout &alt0>; +}; + +&hdmi { + hpd-gpios = <&gpio 46 GPIO_ACTIVE_HIGH>; + power-domains = <&power RPI_POWER_DOMAIN_HDMI>; + status = "okay"; +}; + +&led_act { + gpios = <&gpio 16 GPIO_ACTIVE_LOW>; +}; + +&pwm { + pinctrl-names = "default"; + pinctrl-0 = <&pwm0_gpio40 &pwm1_gpio45>; + status = "okay"; +}; + +&sdhost { + pinctrl-names = "default"; + pinctrl-0 = <&sdhost_gpio48>; + bus-width = <4>; + status = "okay"; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_gpio14>; + status = "okay"; +}; diff --git a/dts/src/arm/broadcom/bcm2835-rpi-cm1-io1.dts b/dts/src/arm/broadcom/bcm2835-rpi-cm1-io1.dts new file mode 100644 index 0000000000..3f9d198ac3 --- /dev/null +++ b/dts/src/arm/broadcom/bcm2835-rpi-cm1-io1.dts @@ -0,0 +1,97 @@ +// SPDX-License-Identifier: GPL-2.0 +/dts-v1/; +#include "bcm2835-rpi-cm1.dtsi" +#include "bcm283x-rpi-usb-host.dtsi" + +/ { + compatible = "raspberrypi,compute-module", "brcm,bcm2835"; + model = "Raspberry Pi Compute Module IO board rev1"; +}; + +&gpio { + /* + * This is based on the official GPU firmware DT blob. + * + * Legend: + * "FOO" = GPIO line named "FOO" on the schematic + * "FOO_N" = GPIO line named "FOO" on schematic, active low + */ + gpio-line-names = "GPIO0", + "GPIO1", + "GPIO2", + "GPIO3", + "GPIO4", + "GPIO5", + "GPIO6", + "GPIO7", + "GPIO8", + "GPIO9", + "GPIO10", + "GPIO11", + "GPIO12", + "GPIO13", + "GPIO14", + "GPIO15", + "GPIO16", + "GPIO17", + "GPIO18", + "GPIO19", + "GPIO20", + "GPIO21", + "GPIO22", + "GPIO23", + "GPIO24", + "GPIO25", + "GPIO26", + "GPIO27", + "GPIO28", + "GPIO29", + "GPIO30", + "GPIO31", + "GPIO32", + "GPIO33", + "GPIO34", + "GPIO35", + "GPIO36", + "GPIO37", + "GPIO38", + "GPIO39", + "GPIO40", + "GPIO41", + "GPIO42", + "GPIO43", + "GPIO44", + "GPIO45", + "HDMI_HPD_N", + /* Also used as ACT LED */ + "EMMC_EN_N", + /* Used by eMMC */ + "SD_CLK_R", + "SD_CMD_R", + "SD_DATA0_R", + "SD_DATA1_R", + "SD_DATA2_R", + "SD_DATA3_R"; + + pinctrl-names = "default"; + pinctrl-0 = <&gpioout &alt0>; +}; + +&hdmi { + hpd-gpios = <&gpio 46 GPIO_ACTIVE_LOW>; + power-domains = <&power RPI_POWER_DOMAIN_HDMI>; + status = "okay"; +}; + +&sdhost { + pinctrl-names = "default"; + pinctrl-0 = <&sdhost_gpio48>; + bus-width = <4>; + status = "okay"; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_gpio14>; + status = "okay"; +}; diff --git a/dts/src/arm/broadcom/bcm2835-rpi-cm1.dtsi b/dts/src/arm/broadcom/bcm2835-rpi-cm1.dtsi new file mode 100644 index 0000000000..750cd76948 --- /dev/null +++ b/dts/src/arm/broadcom/bcm2835-rpi-cm1.dtsi @@ -0,0 +1,45 @@ +// SPDX-License-Identifier: GPL-2.0 +/dts-v1/; +#include "bcm2835.dtsi" +#include "bcm2835-rpi.dtsi" +#include "bcm2835-rpi-common.dtsi" +#include "bcm283x-rpi-led-deprecated.dtsi" + +/ { + leds { + led-act { + gpios = <&gpio 47 GPIO_ACTIVE_LOW>; + }; + }; + + memory@0 { + device_type = "memory"; + reg = <0 0x20000000>; + }; + + reg_3v3: fixed-regulator { + compatible = "regulator-fixed"; + regulator-name = "3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + reg_1v8: fixed-regulator { + compatible = "regulator-fixed"; + regulator-name = "1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; +}; + +&led_act { + gpios = <&gpio 47 GPIO_ACTIVE_LOW>; +}; + +&sdhost { + non-removable; + vmmc-supply = <®_3v3>; + vqmmc-supply = <®_1v8>; +}; diff --git a/dts/src/arm/broadcom/bcm2835-rpi-common.dtsi b/dts/src/arm/broadcom/bcm2835-rpi-common.dtsi new file mode 100644 index 0000000000..4e7b4a592d --- /dev/null +++ b/dts/src/arm/broadcom/bcm2835-rpi-common.dtsi @@ -0,0 +1,29 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * This include file covers the common peripherals and configuration between + * bcm2835, bcm2836 and bcm2837 implementations that interact with RPi's + * firmware interface. + */ + +#include <dt-bindings/power/raspberrypi-power.h> + +&firmware { + firmware_clocks: clocks { + compatible = "raspberrypi,firmware-clocks"; + #clock-cells = <1>; + }; +}; + +&hdmi { + clocks = <&firmware_clocks 9>, + <&firmware_clocks 13>; + clock-names = "pixel", "hdmi"; +}; + +&v3d { + power-domains = <&power RPI_POWER_DOMAIN_V3D>; +}; + +&vec { + clocks = <&firmware_clocks 15>; +}; diff --git a/dts/src/arm/broadcom/bcm2835-rpi-zero-w.dts b/dts/src/arm/broadcom/bcm2835-rpi-zero-w.dts new file mode 100644 index 0000000000..1f0b163e40 --- /dev/null +++ b/dts/src/arm/broadcom/bcm2835-rpi-zero-w.dts @@ -0,0 +1,139 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright (C) 2017 Stefan Wahren <stefan.wahren@i2se.com> + */ + +/dts-v1/; +#include "bcm2835.dtsi" +#include "bcm2835-rpi.dtsi" +#include "bcm2835-rpi-common.dtsi" +#include "bcm283x-rpi-led-deprecated.dtsi" +#include "bcm283x-rpi-usb-otg.dtsi" +#include "bcm283x-rpi-wifi-bt.dtsi" + +/ { + compatible = "raspberrypi,model-zero-w", "brcm,bcm2835"; + model = "Raspberry Pi Zero W"; + + memory@0 { + device_type = "memory"; + reg = <0 0x20000000>; + }; + + chosen { + /* 8250 auxiliary UART instead of pl011 */ + stdout-path = "serial1:115200n8"; + }; +}; + +&bt { + shutdown-gpios = <&gpio 45 GPIO_ACTIVE_HIGH>; +}; + +&gpio { + /* + * This is based on the official GPU firmware DT blob. + * + * Legend: + * "FOO" = GPIO line named "FOO" on the schematic + * "FOO_N" = GPIO line named "FOO" on schematic, active low + */ + gpio-line-names = "ID_SDA", + "ID_SCL", + "SDA1", + "SCL1", + "GPIO_GCLK", + "GPIO5", + "GPIO6", + "SPI_CE1_N", + "SPI_CE0_N", + "SPI_MISO", + "SPI_MOSI", + "SPI_SCLK", + "GPIO12", + "GPIO13", + /* Serial port */ + "TXD0", + "RXD0", + "GPIO16", + "GPIO17", + "GPIO18", + "GPIO19", + "GPIO20", + "GPIO21", + "GPIO22", + "GPIO23", + "GPIO24", + "GPIO25", + "GPIO26", + "GPIO27", + "SDA0", + "SCL0", + /* Used by BT module */ + "CTS0", + "RTS0", + "TXD0", + "RXD0", + /* Used by Wifi */ + "SD1_CLK", + "SD1_CMD", + "SD1_DATA0", + "SD1_DATA1", + "SD1_DATA2", + "SD1_DATA3", + "CAM_GPIO1", /* GPIO40 */ + "WL_ON", /* GPIO41 */ + "", /* GPIO42 */ + "WIFI_CLK", /* GPIO43 */ + "CAM_GPIO0", /* GPIO44 */ + "BT_ON", /* GPIO45 */ + "HDMI_HPD_N", + "STATUS_LED_N", + /* Used by SD Card */ + "SD_CLK_R", + "SD_CMD_R", + "SD_DATA0_R", + "SD_DATA1_R", + "SD_DATA2_R", + "SD_DATA3_R"; + + pinctrl-names = "default"; + pinctrl-0 = <&gpioout &alt0>; +}; + +&hdmi { + hpd-gpios = <&gpio 46 GPIO_ACTIVE_LOW>; + power-domains = <&power RPI_POWER_DOMAIN_HDMI>; + status = "okay"; +}; + +&led_act { + gpios = <&gpio 47 GPIO_ACTIVE_LOW>; +}; + +&sdhci { + pinctrl-names = "default"; + pinctrl-0 = <&emmc_gpio34 &gpclk2_gpio43>; +}; + +&sdhost { + pinctrl-names = "default"; + pinctrl-0 = <&sdhost_gpio48>; + bus-width = <4>; + status = "okay"; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_gpio32 &uart0_ctsrts_gpio30>; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&uart1_gpio14>; + status = "okay"; +}; + +&wifi_pwrseq { + reset-gpios = <&gpio 41 GPIO_ACTIVE_LOW>; +}; diff --git a/dts/src/arm/broadcom/bcm2835-rpi-zero.dts b/dts/src/arm/broadcom/bcm2835-rpi-zero.dts new file mode 100644 index 0000000000..539c19c109 --- /dev/null +++ b/dts/src/arm/broadcom/bcm2835-rpi-zero.dts @@ -0,0 +1,119 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright (C) 2016 Stefan Wahren <stefan.wahren@i2se.com> + */ + +/dts-v1/; +#include "bcm2835.dtsi" +#include "bcm2835-rpi.dtsi" +#include "bcm2835-rpi-common.dtsi" +#include "bcm283x-rpi-led-deprecated.dtsi" +#include "bcm283x-rpi-usb-otg.dtsi" + +/ { + compatible = "raspberrypi,model-zero", "brcm,bcm2835"; + model = "Raspberry Pi Zero"; + + memory@0 { + device_type = "memory"; + reg = <0 0x20000000>; + }; +}; + +&gpio { + /* + * This is based on the official GPU firmware DT blob. + * + * Legend: + * "FOO" = GPIO line named "FOO" on the schematic + * "FOO_N" = GPIO line named "FOO" on schematic, active low + */ + gpio-line-names = "ID_SDA", + "ID_SCL", + "SDA1", + "SCL1", + "GPIO_GCLK", + "GPIO5", + "GPIO6", + "SPI_CE1_N", + "SPI_CE0_N", + "SPI_MISO", + "SPI_MOSI", + "SPI_SCLK", + "GPIO12", + "GPIO13", + /* Serial port */ + "TXD0", + "RXD0", + "GPIO16", + "GPIO17", + "GPIO18", + "GPIO19", + "GPIO20", + "GPIO21", + "GPIO22", + "GPIO23", + "GPIO24", + "GPIO25", + "GPIO26", + "GPIO27", + "SDA0", + "SCL0", + "", /* GPIO30 */ + "", /* GPIO31 */ + "CAM_GPIO1", /* GPIO32 */ + "", /* GPIO33 */ + "", /* GPIO34 */ + "", /* GPIO35 */ + "", /* GPIO36 */ + "", /* GPIO37 */ + "", /* GPIO38 */ + "", /* GPIO39 */ + "", /* GPIO40 */ + "CAM_GPIO0", /* GPIO41 */ + "", /* GPIO42 */ + "", /* GPIO43 */ + "", /* GPIO44 */ + "", /* GPIO45 */ + "HDMI_HPD_N", + "STATUS_LED_N", + /* Used by SD Card */ + "SD_CLK_R", + "SD_CMD_R", + "SD_DATA0_R", + "SD_DATA1_R", + "SD_DATA2_R", + "SD_DATA3_R"; + + pinctrl-names = "default"; + pinctrl-0 = <&gpioout &alt0 &i2s_alt0>; + + /* I2S interface */ + i2s_alt0: i2s_alt0 { + brcm,pins = <18 19 20 21>; + brcm,function = <BCM2835_FSEL_ALT0>; + }; +}; + +&hdmi { + hpd-gpios = <&gpio 46 GPIO_ACTIVE_LOW>; + power-domains = <&power RPI_POWER_DOMAIN_HDMI>; + status = "okay"; +}; + +&led_act { + gpios = <&gpio 47 GPIO_ACTIVE_HIGH>; +}; + +&sdhost { + pinctrl-names = "default"; + pinctrl-0 = <&sdhost_gpio48>; + bus-width = <4>; + status = "okay"; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_gpio14>; + status = "okay"; +}; diff --git a/dts/src/arm/broadcom/bcm2835-rpi.dtsi b/dts/src/arm/broadcom/bcm2835-rpi.dtsi new file mode 100644 index 0000000000..f0acc9390f --- /dev/null +++ b/dts/src/arm/broadcom/bcm2835-rpi.dtsi @@ -0,0 +1,69 @@ +#include <dt-bindings/power/raspberrypi-power.h> + +/ { + soc { + firmware: firmware { + compatible = "raspberrypi,bcm2835-firmware", "simple-mfd"; + #address-cells = <1>; + #size-cells = <1>; + + mboxes = <&mailbox>; + dma-ranges; + }; + + power: power { + compatible = "raspberrypi,bcm2835-power"; + firmware = <&firmware>; + #power-domain-cells = <1>; + }; + + vchiq: mailbox@7e00b840 { + compatible = "brcm,bcm2835-vchiq"; + reg = <0x7e00b840 0x3c>; + interrupts = <0 2>; + }; + }; +}; + +&gpio { + gpioout: gpioout { + brcm,pins = <6>; + brcm,function = <BCM2835_FSEL_GPIO_OUT>; + }; + + alt0: alt0 { + brcm,pins = <4 5 7 8 9 10 11>; + brcm,function = <BCM2835_FSEL_ALT0>; + }; +}; + +&i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_gpio0>; + status = "okay"; + clock-frequency = <100000>; +}; + +&i2c1 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_gpio2>; + status = "okay"; + clock-frequency = <100000>; +}; + +&usb { + power-domains = <&power RPI_POWER_DOMAIN_USB>; +}; + +&vec { + power-domains = <&power RPI_POWER_DOMAIN_VEC>; + status = "okay"; +}; + +&dsi0 { + power-domains = <&power RPI_POWER_DOMAIN_DSI0>; +}; + +&dsi1 { + power-domains = <&power RPI_POWER_DOMAIN_DSI1>; +}; diff --git a/dts/src/arm/broadcom/bcm2835.dtsi b/dts/src/arm/broadcom/bcm2835.dtsi new file mode 100644 index 0000000000..15cb331feb --- /dev/null +++ b/dts/src/arm/broadcom/bcm2835.dtsi @@ -0,0 +1,54 @@ +// SPDX-License-Identifier: GPL-2.0 +#include "bcm283x.dtsi" +#include "bcm2835-common.dtsi" + +/ { + compatible = "brcm,bcm2835"; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + device_type = "cpu"; + compatible = "arm,arm1176jzf-s"; + reg = <0x0>; + /* Source for d/i-cache-line-size and d/i-cache-sets + * https://developer.arm.com/documentation/ddi0301 + * /h/level-one-memory-system/cache-organization?lang=en + * + * Source for d/i-cache-size + * https://forums.raspberrypi.com/viewtopic.php?t=98428 + * + * NOTE: The BCM2835 has a L2 cache but it is dedicated to the GPU + * It can be shared with the CPU through fw settings, + * but this is not recommended. + */ + d-cache-size = <0x4000>; + d-cache-line-size = <16>; + d-cache-sets = <256>; // 16KiB(size)/16(line-size)=1024ways/4-way set + i-cache-size = <0x4000>; + i-cache-line-size = <16>; + i-cache-sets = <256>; // 16KiB(size)/16(line-size)=1024ways/4-way set + }; + }; + + soc { + ranges = <0x7e000000 0x20000000 0x02000000>; + dma-ranges = <0x40000000 0x00000000 0x20000000>; + }; + + arm-pmu { + compatible = "arm,arm1176-pmu"; + }; +}; + +&cpu_thermal { + coefficients = <(-538) 407000>; +}; + +/* enable thermal sensor with the correct compatible property set */ +&thermal { + compatible = "brcm,bcm2835-thermal"; + status = "okay"; +}; diff --git a/dts/src/arm/broadcom/bcm2836-rpi-2-b.dts b/dts/src/arm/broadcom/bcm2836-rpi-2-b.dts new file mode 100644 index 0000000000..7991803375 --- /dev/null +++ b/dts/src/arm/broadcom/bcm2836-rpi-2-b.dts @@ -0,0 +1,131 @@ +// SPDX-License-Identifier: GPL-2.0 +/dts-v1/; +#include "bcm2836.dtsi" +#include "bcm2836-rpi.dtsi" +#include "bcm283x-rpi-led-deprecated.dtsi" +#include "bcm283x-rpi-smsc9514.dtsi" +#include "bcm283x-rpi-usb-host.dtsi" + +/ { + compatible = "raspberrypi,2-model-b", "brcm,bcm2836"; + model = "Raspberry Pi 2 Model B"; + + memory@0 { + device_type = "memory"; + reg = <0 0x40000000>; + }; +}; + +&gpio { + /* + * Taken from rpi_SCH_2b_1p2_reduced.pdf and + * the official GPU firmware DT blob. + * + * Legend: + * "FOO" = GPIO line named "FOO" on the schematic + * "FOO_N" = GPIO line named "FOO" on schematic, active low + */ + gpio-line-names = "ID_SDA", + "ID_SCL", + "SDA1", + "SCL1", + "GPIO_GCLK", + "GPIO5", + "GPIO6", + "SPI_CE1_N", + "SPI_CE0_N", + "SPI_MISO", + "SPI_MOSI", + "SPI_SCLK", + "GPIO12", + "GPIO13", + /* Serial port */ + "TXD0", + "RXD0", + "GPIO16", + "GPIO17", + "GPIO18", + "GPIO19", + "GPIO20", + "GPIO21", + "GPIO22", + "GPIO23", + "GPIO24", + "GPIO25", + "GPIO26", + "GPIO27", + "SDA0", + "SCL0", + "", /* GPIO30 */ + "LAN_RUN", + "CAM_GPIO1", + "", /* GPIO33 */ + "", /* GPIO34 */ + "PWR_LOW_N", + "", /* GPIO36 */ + "", /* GPIO37 */ + "USB_LIMIT", + "", /* GPIO39 */ + "PWM0_OUT", + "CAM_GPIO0", + "SMPS_SCL", + "SMPS_SDA", + "ETH_CLK", + "PWM1_OUT", + "HDMI_HPD_N", + "STATUS_LED", + /* Used by SD Card */ + "SD_CLK_R", + "SD_CMD_R", + "SD_DATA0_R", + "SD_DATA1_R", + "SD_DATA2_R", + "SD_DATA3_R"; + + pinctrl-names = "default"; + pinctrl-0 = <&gpioout &alt0 &i2s_alt0>; + + /* I2S interface */ + i2s_alt0: i2s_alt0 { + brcm,pins = <18 19 20 21>; + brcm,function = <BCM2835_FSEL_ALT0>; + }; +}; + +&hdmi { + hpd-gpios = <&gpio 46 GPIO_ACTIVE_LOW>; + power-domains = <&power RPI_POWER_DOMAIN_HDMI>; + status = "okay"; +}; + +&led_act { + gpios = <&gpio 47 GPIO_ACTIVE_HIGH>; +}; + +&leds { + led-pwr { + label = "PWR"; + gpios = <&gpio 35 GPIO_ACTIVE_HIGH>; + default-state = "keep"; + linux,default-trigger = "default-on"; + }; +}; + +&pwm { + pinctrl-names = "default"; + pinctrl-0 = <&pwm0_gpio40 &pwm1_gpio45>; + status = "okay"; +}; + +&sdhost { + pinctrl-names = "default"; + pinctrl-0 = <&sdhost_gpio48>; + bus-width = <4>; + status = "okay"; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_gpio14>; + status = "okay"; +}; diff --git a/dts/src/arm/broadcom/bcm2836-rpi.dtsi b/dts/src/arm/broadcom/bcm2836-rpi.dtsi new file mode 100644 index 0000000000..48b03b55ff --- /dev/null +++ b/dts/src/arm/broadcom/bcm2836-rpi.dtsi @@ -0,0 +1,7 @@ +// SPDX-License-Identifier: GPL-2.0 +#include "bcm2835-rpi.dtsi" +#include "bcm2835-rpi-common.dtsi" + +&vchiq { + compatible = "brcm,bcm2836-vchiq", "brcm,bcm2835-vchiq"; +}; diff --git a/dts/src/arm/broadcom/bcm2836.dtsi b/dts/src/arm/broadcom/bcm2836.dtsi new file mode 100644 index 0000000000..783fe624ba --- /dev/null +++ b/dts/src/arm/broadcom/bcm2836.dtsi @@ -0,0 +1,142 @@ +// SPDX-License-Identifier: GPL-2.0 +#include "bcm283x.dtsi" +#include "bcm2835-common.dtsi" + +/ { + compatible = "brcm,bcm2836"; + + soc { + ranges = <0x7e000000 0x3f000000 0x1000000>, + <0x40000000 0x40000000 0x00001000>; + dma-ranges = <0xc0000000 0x00000000 0x3f000000>; + + local_intc: interrupt-controller@40000000 { + compatible = "brcm,bcm2836-l1-intc"; + reg = <0x40000000 0x100>; + interrupt-controller; + #interrupt-cells = <2>; + interrupt-parent = <&local_intc>; + }; + }; + + arm-pmu { + compatible = "arm,cortex-a7-pmu"; + interrupt-parent = <&local_intc>; + interrupts = <9 IRQ_TYPE_LEVEL_HIGH>; + }; + + timer { + compatible = "arm,armv7-timer"; + interrupt-parent = <&local_intc>; + interrupts = <0 IRQ_TYPE_LEVEL_HIGH>, // PHYS_SECURE_PPI + <1 IRQ_TYPE_LEVEL_HIGH>, // PHYS_NONSECURE_PPI + <3 IRQ_TYPE_LEVEL_HIGH>, // VIRT_PPI + <2 IRQ_TYPE_LEVEL_HIGH>; // HYP_PPI + always-on; + }; + + cpus: cpus { + #address-cells = <1>; + #size-cells = <0>; + enable-method = "brcm,bcm2836-smp"; + + /* Source for d/i-cache-line-size and d/i-cache-sets + * https://developer.arm.com/documentation/ddi0464/f/L1-Memory-System + * /About-the-L1-memory-system?lang=en + * + * Source for d/i-cache-size + * https://forums.raspberrypi.com/viewtopic.php?t=98428 + */ + + v7_cpu0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a7"; + reg = <0xf00>; + clock-frequency = <800000000>; + d-cache-size = <0x8000>; + d-cache-line-size = <64>; + d-cache-sets = <128>; // 32KiB(size)/64(line-size)=512ways/4-way set + i-cache-size = <0x8000>; + i-cache-line-size = <32>; + i-cache-sets = <512>; // 32KiB(size)/32(line-size)=1024ways/2-way set + next-level-cache = <&l2>; + }; + + v7_cpu1: cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a7"; + reg = <0xf01>; + clock-frequency = <800000000>; + d-cache-size = <0x8000>; + d-cache-line-size = <64>; + d-cache-sets = <128>; // 32KiB(size)/64(line-size)=512ways/4-way set + i-cache-size = <0x8000>; + i-cache-line-size = <32>; + i-cache-sets = <512>; // 32KiB(size)/32(line-size)=1024ways/2-way set + next-level-cache = <&l2>; + }; + + v7_cpu2: cpu@2 { + device_type = "cpu"; + compatible = "arm,cortex-a7"; + reg = <0xf02>; + clock-frequency = <800000000>; + d-cache-size = <0x8000>; + d-cache-line-size = <64>; + d-cache-sets = <128>; // 32KiB(size)/64(line-size)=512ways/4-way set + i-cache-size = <0x8000>; + i-cache-line-size = <32>; + i-cache-sets = <512>; // 32KiB(size)/32(line-size)=1024ways/2-way set + next-level-cache = <&l2>; + }; + + v7_cpu3: cpu@3 { + device_type = "cpu"; + compatible = "arm,cortex-a7"; + reg = <0xf03>; + clock-frequency = <800000000>; + d-cache-size = <0x8000>; + d-cache-line-size = <64>; + d-cache-sets = <128>; // 32KiB(size)/64(line-size)=512ways/4-way set + i-cache-size = <0x8000>; + i-cache-line-size = <32>; + i-cache-sets = <512>; // 32KiB(size)/32(line-size)=1024ways/2-way set + next-level-cache = <&l2>; + }; + + /* Source for cache-line-size + cache-sets + * https://developer.arm.com/documentation/ddi0464/f/L2-Memory-System + * /About-the-L2-Memory-system?lang=en + * Source for cache-size + * https://forums.raspberrypi.com/viewtopic.php?t=98428 + */ + l2: l2-cache0 { + compatible = "cache"; + cache-unified; + cache-size = <0x80000>; + cache-line-size = <64>; + cache-sets = <1024>; // 512KiB(size)/64(line-size)=8192ways/8-way set + cache-level = <2>; + }; + }; +}; + +/* Make the BCM2835-style global interrupt controller be a child of the + * CPU-local interrupt controller. + */ +&intc { + compatible = "brcm,bcm2836-armctrl-ic"; + reg = <0x7e00b200 0x200>; + interrupt-parent = <&local_intc>; + interrupts = <8 IRQ_TYPE_LEVEL_HIGH>; +}; + +&cpu_thermal { + coefficients = <(-538) 407000>; +}; + +/* enable thermal sensor with the correct compatible property set */ +&thermal { + compatible = "brcm,bcm2836-thermal"; + status = "okay"; +}; diff --git a/dts/src/arm/broadcom/bcm2837-rpi-3-a-plus.dts b/dts/src/arm/broadcom/bcm2837-rpi-3-a-plus.dts new file mode 100644 index 0000000000..3548306dfb --- /dev/null +++ b/dts/src/arm/broadcom/bcm2837-rpi-3-a-plus.dts @@ -0,0 +1,158 @@ +// SPDX-License-Identifier: GPL-2.0 +/dts-v1/; +#include "bcm2837.dtsi" +#include "bcm2836-rpi.dtsi" +#include "bcm283x-rpi-led-deprecated.dtsi" +#include "bcm283x-rpi-usb-host.dtsi" +#include "bcm283x-rpi-wifi-bt.dtsi" + +/ { + compatible = "raspberrypi,3-model-a-plus", "brcm,bcm2837"; + model = "Raspberry Pi 3 Model A+"; + + chosen { + /* 8250 auxiliary UART instead of pl011 */ + stdout-path = "serial1:115200n8"; + }; + + memory@0 { + device_type = "memory"; + reg = <0 0x20000000>; + }; +}; + +&firmware { + expgpio: gpio { + compatible = "raspberrypi,firmware-gpio"; + gpio-controller; + #gpio-cells = <2>; + gpio-line-names = "", + "BT_WL_ON", + "STATUS_LED_R", + "", + "", + "CAM_GPIO0", + "CAM_GPIO1", + ""; + status = "okay"; + }; +}; + +&gpio { + /* + * This is mostly based on the official GPU firmware DT blob. + * + * Legend: + * "FOO" = GPIO line named "FOO" on the schematic + * "FOO_N" = GPIO line named "FOO" on schematic, active low + */ + gpio-line-names = "ID_SDA", + "ID_SCL", + "SDA1", + "SCL1", + "GPIO_GCLK", + "GPIO5", + "GPIO6", + "SPI_CE1_N", + "SPI_CE0_N", + "SPI_MISO", + "SPI_MOSI", + "SPI_SCLK", + "GPIO12", + "GPIO13", + /* Serial port */ + "TXD1", + "RXD1", + "GPIO16", + "GPIO17", + "GPIO18", + "GPIO19", + "GPIO20", + "GPIO21", + "GPIO22", + "GPIO23", + "GPIO24", + "GPIO25", + "GPIO26", + "GPIO27", + "HDMI_HPD_N", + "STATUS_LED_G", + /* Used by BT module */ + "CTS0", + "RTS0", + "TXD0", + "RXD0", + /* Used by Wifi */ + "SD1_CLK", + "SD1_CMD", + "SD1_DATA0", + "SD1_DATA1", + "SD1_DATA2", + "SD1_DATA3", + "PWM0_OUT", + "PWM1_OUT", + "", /* GPIO42 */ + "WIFI_CLK", + "SDA0", + "SCL0", + "SMPS_SCL", + "SMPS_SDA", + /* Used by SD Card */ + "SD_CLK_R", + "SD_CMD_R", + "SD_DATA0_R", + "SD_DATA1_R", + "SD_DATA2_R", + "SD_DATA3_R"; +}; + +&hdmi { + hpd-gpios = <&gpio 28 GPIO_ACTIVE_LOW>; + power-domains = <&power RPI_POWER_DOMAIN_HDMI>; + status = "okay"; +}; + +&led_act { + gpios = <&gpio 29 GPIO_ACTIVE_HIGH>; +}; + +&leds { + led-pwr { + label = "PWR"; + gpios = <&expgpio 2 GPIO_ACTIVE_LOW>; + default-state = "keep"; + linux,default-trigger = "default-on"; + }; +}; + +&pwm { + pinctrl-names = "default"; + pinctrl-0 = <&pwm0_gpio40 &pwm1_gpio41>; + status = "okay"; +}; + +/* SDHOST is used to drive the SD card */ +&sdhost { + pinctrl-names = "default"; + pinctrl-0 = <&sdhost_gpio48>; + status = "okay"; + bus-width = <4>; +}; + +/* uart0 communicates with the BT module + * + * WL_REG_ON and BT_REG_ON of the CYW43455 Wifi/BT module are driven + * by a single GPIO. We can't give GPIO control to one of the drivers, + * otherwise the other part would get unexpectedly disturbed. + */ +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_ctsrts_gpio30 &uart0_gpio32 &gpclk2_gpio43>; +}; + +/* uart1 is mapped to the pin header */ +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&uart1_gpio14>; + status = "okay"; +}; diff --git a/dts/src/arm/broadcom/bcm2837-rpi-3-b-plus.dts b/dts/src/arm/broadcom/bcm2837-rpi-3-b-plus.dts new file mode 100644 index 0000000000..2f1800cbc5 --- /dev/null +++ b/dts/src/arm/broadcom/bcm2837-rpi-3-b-plus.dts @@ -0,0 +1,163 @@ +// SPDX-License-Identifier: GPL-2.0 +/dts-v1/; +#include "bcm2837.dtsi" +#include "bcm2836-rpi.dtsi" +#include "bcm283x-rpi-lan7515.dtsi" +#include "bcm283x-rpi-led-deprecated.dtsi" +#include "bcm283x-rpi-usb-host.dtsi" +#include "bcm283x-rpi-wifi-bt.dtsi" + +/ { + compatible = "raspberrypi,3-model-b-plus", "brcm,bcm2837"; + model = "Raspberry Pi 3 Model B+"; + + chosen { + /* 8250 auxiliary UART instead of pl011 */ + stdout-path = "serial1:115200n8"; + }; + + memory@0 { + device_type = "memory"; + reg = <0 0x40000000>; + }; +}; + +&bt { + shutdown-gpios = <&expgpio 0 GPIO_ACTIVE_HIGH>; +}; + +&firmware { + expgpio: gpio { + compatible = "raspberrypi,firmware-gpio"; + gpio-controller; + #gpio-cells = <2>; + gpio-line-names = "BT_ON", + "WL_ON", + "PWR_LED_R", + "LAN_RUN", + "", + "CAM_GPIO0", + "CAM_GPIO1", + ""; + status = "okay"; + }; +}; + +&gpio { + /* + * Taken from rpi_SCH_3bplus_1p0_reduced.pdf and + * the official GPU firmware DT blob. + * + * Legend: + * "FOO" = GPIO line named "FOO" on the schematic + * "FOO_N" = GPIO line named "FOO" on schematic, active low + */ + gpio-line-names = "ID_SDA", + "ID_SCL", + "SDA1", + "SCL1", + "GPIO_GCLK", + "GPIO5", + "GPIO6", + "SPI_CE1_N", + "SPI_CE0_N", + "SPI_MISO", + "SPI_MOSI", + "SPI_SCLK", + "GPIO12", + "GPIO13", + /* Serial port */ + "TXD1", + "RXD1", + "GPIO16", + "GPIO17", + "GPIO18", + "GPIO19", + "GPIO20", + "GPIO21", + "GPIO22", + "GPIO23", + "GPIO24", + "GPIO25", + "GPIO26", + "GPIO27", + "HDMI_HPD_N", + "STATUS_LED_G", + /* Used by BT module */ + "CTS0", + "RTS0", + "TXD0", + "RXD0", + /* Used by Wifi */ + "SD1_CLK", + "SD1_CMD", + "SD1_DATA0", + "SD1_DATA1", + "SD1_DATA2", + "SD1_DATA3", + "PWM0_OUT", + "PWM1_OUT", + "ETH_CLK", + "WIFI_CLK", + "SDA0", + "SCL0", + "SMPS_SCL", + "SMPS_SDA", + /* Used by SD Card */ + "SD_CLK_R", + "SD_CMD_R", + "SD_DATA0_R", + "SD_DATA1_R", + "SD_DATA2_R", + "SD_DATA3_R"; +}; + +&hdmi { + hpd-gpios = <&gpio 28 GPIO_ACTIVE_LOW>; + power-domains = <&power RPI_POWER_DOMAIN_HDMI>; + status = "okay"; +}; + +&led_act { + gpios = <&gpio 29 GPIO_ACTIVE_HIGH>; +}; + +&leds { + led-pwr { + label = "PWR"; + gpios = <&expgpio 2 GPIO_ACTIVE_LOW>; + default-state = "keep"; + linux,default-trigger = "default-on"; + }; +}; + +&pwm { + pinctrl-names = "default"; + pinctrl-0 = <&pwm0_gpio40 &pwm1_gpio41>; + status = "okay"; +}; + +/* SDHOST is used to drive the SD card */ +&sdhost { + pinctrl-names = "default"; + pinctrl-0 = <&sdhost_gpio48>; + status = "okay"; + bus-width = <4>; +}; + +/* uart0 communicates with the BT module */ +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_ctsrts_gpio30 &uart0_gpio32 &gpclk2_gpio43>; +}; + +/* uart1 is mapped to the pin header */ +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&uart1_gpio14>; + status = "okay"; +}; + +&wifi_pwrseq { + reset-gpios = <&expgpio 1 GPIO_ACTIVE_LOW>; +}; diff --git a/dts/src/arm/broadcom/bcm2837-rpi-3-b.dts b/dts/src/arm/broadcom/bcm2837-rpi-3-b.dts new file mode 100644 index 0000000000..6127034007 --- /dev/null +++ b/dts/src/arm/broadcom/bcm2837-rpi-3-b.dts @@ -0,0 +1,154 @@ +// SPDX-License-Identifier: GPL-2.0 +/dts-v1/; +#include "bcm2837.dtsi" +#include "bcm2836-rpi.dtsi" +#include "bcm283x-rpi-led-deprecated.dtsi" +#include "bcm283x-rpi-smsc9514.dtsi" +#include "bcm283x-rpi-usb-host.dtsi" +#include "bcm283x-rpi-wifi-bt.dtsi" + +/ { + compatible = "raspberrypi,3-model-b", "brcm,bcm2837"; + model = "Raspberry Pi 3 Model B"; + + chosen { + /* 8250 auxiliary UART instead of pl011 */ + stdout-path = "serial1:115200n8"; + }; + + memory@0 { + device_type = "memory"; + reg = <0 0x40000000>; + }; +}; + +&bt { + shutdown-gpios = <&expgpio 0 GPIO_ACTIVE_HIGH>; +}; + +&firmware { + expgpio: gpio { + compatible = "raspberrypi,firmware-gpio"; + gpio-controller; + #gpio-cells = <2>; + gpio-line-names = "BT_ON", + "WL_ON", + "STATUS_LED", + "LAN_RUN", + "HDMI_HPD_N", + "CAM_GPIO0", + "CAM_GPIO1", + "PWR_LOW_N"; + status = "okay"; + }; +}; + +&gpio { + /* + * Taken from rpi_SCH_3b_1p2_reduced.pdf and + * the official GPU firmware DT blob. + * + * Legend: + * "FOO" = GPIO line named "FOO" on the schematic + * "FOO_N" = GPIO line named "FOO" on schematic, active low + */ + gpio-line-names = "ID_SDA", + "ID_SCL", + "SDA1", + "SCL1", + "GPIO_GCLK", + "GPIO5", + "GPIO6", + "SPI_CE1_N", + "SPI_CE0_N", + "SPI_MISO", + "SPI_MOSI", + "SPI_SCLK", + "GPIO12", + "GPIO13", + /* Serial port */ + "TXD1", + "RXD1", + "GPIO16", + "GPIO17", + "GPIO18", + "GPIO19", + "GPIO20", + "GPIO21", + "GPIO22", + "GPIO23", + "GPIO24", + "GPIO25", + "GPIO26", + "GPIO27", + "", /* GPIO 28 */ + "LAN_RUN_BOOT", + /* Used by BT module */ + "CTS0", + "RTS0", + "TXD0", + "RXD0", + /* Used by Wifi */ + "SD1_CLK", + "SD1_CMD", + "SD1_DATA0", + "SD1_DATA1", + "SD1_DATA2", + "SD1_DATA3", + "PWM0_OUT", + "PWM1_OUT", + "ETH_CLK", + "WIFI_CLK", + "SDA0", + "SCL0", + "SMPS_SCL", + "SMPS_SDA", + /* Used by SD Card */ + "SD_CLK_R", + "SD_CMD_R", + "SD_DATA0_R", + "SD_DATA1_R", + "SD_DATA2_R", + "SD_DATA3_R"; +}; + +&pwm { + pinctrl-names = "default"; + pinctrl-0 = <&pwm0_gpio40 &pwm1_gpio41>; + status = "okay"; +}; + +&hdmi { + hpd-gpios = <&expgpio 4 GPIO_ACTIVE_LOW>; + power-domains = <&power RPI_POWER_DOMAIN_HDMI>; + status = "okay"; +}; + +&led_act { + gpios = <&expgpio 2 GPIO_ACTIVE_HIGH>; +}; + +/* uart0 communicates with the BT module */ +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_gpio32 &gpclk2_gpio43>; +}; + +/* uart1 is mapped to the pin header */ +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&uart1_gpio14>; + status = "okay"; +}; + +/* SDHOST is used to drive the SD card */ +&sdhost { + pinctrl-names = "default"; + pinctrl-0 = <&sdhost_gpio48>; + status = "okay"; + bus-width = <4>; +}; + +&wifi_pwrseq { + reset-gpios = <&expgpio 1 GPIO_ACTIVE_LOW>; +}; diff --git a/dts/src/arm/broadcom/bcm2837-rpi-cm3-io3.dts b/dts/src/arm/broadcom/bcm2837-rpi-cm3-io3.dts new file mode 100644 index 0000000000..72d26d130e --- /dev/null +++ b/dts/src/arm/broadcom/bcm2837-rpi-cm3-io3.dts @@ -0,0 +1,96 @@ +// SPDX-License-Identifier: GPL-2.0 +/dts-v1/; +#include "bcm2837-rpi-cm3.dtsi" +#include "bcm283x-rpi-usb-host.dtsi" + +/ { + compatible = "raspberrypi,3-compute-module", "brcm,bcm2837"; + model = "Raspberry Pi Compute Module 3 IO board V3.0"; +}; + +&gpio { + /* + * This is based on the official GPU firmware DT blob. + * + * Legend: + * "FOO" = GPIO line named "FOO" on the schematic + * "FOO_N" = GPIO line named "FOO" on schematic, active low + */ + gpio-line-names = "GPIO0", + "GPIO1", + "GPIO2", + "GPIO3", + "GPIO4", + "GPIO5", + "GPIO6", + "GPIO7", + "GPIO8", + "GPIO9", + "GPIO10", + "GPIO11", + "GPIO12", + "GPIO13", + "GPIO14", + "GPIO15", + "GPIO16", + "GPIO17", + "GPIO18", + "GPIO19", + "GPIO20", + "GPIO21", + "GPIO22", + "GPIO23", + "GPIO24", + "GPIO25", + "GPIO26", + "GPIO27", + "GPIO28", + "GPIO29", + "GPIO30", + "GPIO31", + "GPIO32", + "GPIO33", + "GPIO34", + "GPIO35", + "GPIO36", + "GPIO37", + "GPIO38", + "GPIO39", + "GPIO40", + "GPIO41", + "GPIO42", + "GPIO43", + "GPIO44", + "GPIO45", + "SMPS_SCL", + "SMPS_SDA", + /* Used by eMMC */ + "SD_CLK_R", + "SD_CMD_R", + "SD_DATA0_R", + "SD_DATA1_R", + "SD_DATA2_R", + "SD_DATA3_R"; + + pinctrl-names = "default"; + pinctrl-0 = <&gpioout &alt0>; +}; + +&hdmi { + hpd-gpios = <&expgpio 1 GPIO_ACTIVE_LOW>; + power-domains = <&power RPI_POWER_DOMAIN_HDMI>; + status = "okay"; +}; + +&sdhost { + pinctrl-names = "default"; + pinctrl-0 = <&sdhost_gpio48>; + bus-width = <4>; + status = "okay"; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_gpio14>; + status = "okay"; +}; diff --git a/dts/src/arm/broadcom/bcm2837-rpi-cm3.dtsi b/dts/src/arm/broadcom/bcm2837-rpi-cm3.dtsi new file mode 100644 index 0000000000..1e4e4946b6 --- /dev/null +++ b/dts/src/arm/broadcom/bcm2837-rpi-cm3.dtsi @@ -0,0 +1,53 @@ +// SPDX-License-Identifier: GPL-2.0 +/dts-v1/; +#include "bcm2837.dtsi" +#include "bcm2836-rpi.dtsi" + +/ { + memory@0 { + device_type = "memory"; + reg = <0 0x40000000>; + }; + + reg_3v3: fixed-regulator { + compatible = "regulator-fixed"; + regulator-name = "3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + reg_1v8: fixed-regulator { + compatible = "regulator-fixed"; + regulator-name = "1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; +}; + +&firmware { + expgpio: gpio { + compatible = "raspberrypi,firmware-gpio"; + gpio-controller; + #gpio-cells = <2>; + gpio-line-names = "HDMI_HPD_N", + "EMMC_EN_N", + "", + "", + "", + "", + "", + ""; + status = "okay"; + }; +}; + +&sdhost { + pinctrl-names = "default"; + pinctrl-0 = <&sdhost_gpio48>; + bus-width = <4>; + vmmc-supply = <®_3v3>; + vqmmc-supply = <®_1v8>; + status = "okay"; +}; diff --git a/dts/src/arm/broadcom/bcm2837-rpi-zero-2-w.dts b/dts/src/arm/broadcom/bcm2837-rpi-zero-2-w.dts new file mode 100644 index 0000000000..85cf594724 --- /dev/null +++ b/dts/src/arm/broadcom/bcm2837-rpi-zero-2-w.dts @@ -0,0 +1,137 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright (C) 2022 Stefan Wahren <stefan.wahren@i2se.com> + */ + +/dts-v1/; +#include "bcm2837.dtsi" +#include "bcm2836-rpi.dtsi" +#include "bcm283x-rpi-led-deprecated.dtsi" +#include "bcm283x-rpi-usb-otg.dtsi" +#include "bcm283x-rpi-wifi-bt.dtsi" + +/ { + compatible = "raspberrypi,model-zero-2-w", "brcm,bcm2837"; + model = "Raspberry Pi Zero 2 W"; + + memory@0 { + device_type = "memory"; + reg = <0 0x20000000>; + }; + + chosen { + /* 8250 auxiliary UART instead of pl011 */ + stdout-path = "serial1:115200n8"; + }; +}; + +&bt { + shutdown-gpios = <&gpio 42 GPIO_ACTIVE_HIGH>; +}; + +&gpio { + /* + * This is based on the official GPU firmware DT blob. + * + * Legend: + * "NC" = not connected (no rail from the SoC) + * "FOO" = GPIO line named "FOO" on the schematic + * "FOO_N" = GPIO line named "FOO" on schematic, active low + */ + gpio-line-names = "ID_SDA", + "ID_SCL", + "SDA1", + "SCL1", + "GPIO_GCLK", + "GPIO5", + "GPIO6", + "SPI_CE1_N", + "SPI_CE0_N", + "SPI_MISO", + "SPI_MOSI", + "SPI_SCLK", + "GPIO12", + "GPIO13", + /* Serial port */ + "TXD0", + "RXD0", + "GPIO16", + "GPIO17", + "GPIO18", + "GPIO19", + "GPIO20", + "GPIO21", + "GPIO22", + "GPIO23", + "GPIO24", + "GPIO25", + "GPIO26", + "GPIO27", + "HDMI_HPD_N", + "STATUS_LED_N", + "NC", /* GPIO30 */ + "NC", /* GPIO31 */ + "NC", /* GPIO32 */ + "NC", /* GPIO33 */ + "NC", /* GPIO34 */ + "NC", /* GPIO35 */ + "NC", /* GPIO36 */ + "NC", /* GPIO37 */ + "NC", /* GPIO38 */ + "NC", /* GPIO39 */ + "CAM_GPIO0", /* GPIO40 */ + "WL_ON", /* GPIO41 */ + "BT_ON", /* GPIO42 */ + "WIFI_CLK", /* GPIO43 */ + "SDA0", /* GPIO44 */ + "SCL0", /* GPIO45 */ + "SMPS_SCL", + "SMPS_SDA", + /* Used by SD Card */ + "SD_CLK_R", + "SD_CMD_R", + "SD_DATA0_R", + "SD_DATA1_R", + "SD_DATA2_R", + "SD_DATA3_R"; + + pinctrl-names = "default"; + pinctrl-0 = <&gpioout &alt0>; +}; + +&hdmi { + hpd-gpios = <&gpio 28 GPIO_ACTIVE_LOW>; + power-domains = <&power RPI_POWER_DOMAIN_HDMI>; + status = "okay"; +}; + +&led_act { + gpios = <&gpio 29 GPIO_ACTIVE_LOW>; +}; + +&sdhci { + pinctrl-names = "default"; + pinctrl-0 = <&emmc_gpio34 &gpclk2_gpio43>; +}; + +&sdhost { + pinctrl-names = "default"; + pinctrl-0 = <&sdhost_gpio48>; + bus-width = <4>; + status = "okay"; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_gpio32 &uart0_ctsrts_gpio30>; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&uart1_gpio14>; + status = "okay"; +}; + +&wifi_pwrseq { + reset-gpios = <&gpio 41 GPIO_ACTIVE_LOW>; +}; diff --git a/dts/src/arm/broadcom/bcm2837.dtsi b/dts/src/arm/broadcom/bcm2837.dtsi new file mode 100644 index 0000000000..84c08b4651 --- /dev/null +++ b/dts/src/arm/broadcom/bcm2837.dtsi @@ -0,0 +1,144 @@ +#include "bcm283x.dtsi" +#include "bcm2835-common.dtsi" + +/ { + compatible = "brcm,bcm2837"; + + soc { + ranges = <0x7e000000 0x3f000000 0x1000000>, + <0x40000000 0x40000000 0x00001000>; + dma-ranges = <0xc0000000 0x00000000 0x3f000000>; + + local_intc: local_intc@40000000 { + compatible = "brcm,bcm2836-l1-intc"; + reg = <0x40000000 0x100>; + interrupt-controller; + #interrupt-cells = <2>; + interrupt-parent = <&local_intc>; + }; + }; + + arm-pmu { + compatible = "arm,cortex-a53-pmu"; + interrupt-parent = <&local_intc>; + interrupts = <9 IRQ_TYPE_LEVEL_HIGH>; + }; + + timer { + compatible = "arm,armv7-timer"; + interrupt-parent = <&local_intc>; + interrupts = <0 IRQ_TYPE_LEVEL_HIGH>, // PHYS_SECURE_PPI + <1 IRQ_TYPE_LEVEL_HIGH>, // PHYS_NONSECURE_PPI + <3 IRQ_TYPE_LEVEL_HIGH>, // VIRT_PPI + <2 IRQ_TYPE_LEVEL_HIGH>; // HYP_PPI + always-on; + }; + + cpus: cpus { + #address-cells = <1>; + #size-cells = <0>; + enable-method = "brcm,bcm2836-smp"; // for ARM 32-bit + + /* Source for d/i-cache-line-size and d/i-cache-sets + * https://developer.arm.com/documentation/ddi0500/e/level-1-memory-system + * /about-the-l1-memory-system?lang=en + * + * Source for d/i-cache-size + * https://magpi.raspberrypi.com/articles/raspberry-pi-3-specs-benchmarks + */ + cpu0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0>; + enable-method = "spin-table"; + cpu-release-addr = <0x0 0x000000d8>; + d-cache-size = <0x8000>; + d-cache-line-size = <64>; + d-cache-sets = <128>; // 32KiB(size)/64(line-size)=512ways/4-way set + i-cache-size = <0x8000>; + i-cache-line-size = <64>; + i-cache-sets = <256>; // 32KiB(size)/64(line-size)=512ways/2-way set + next-level-cache = <&l2>; + }; + + cpu1: cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <1>; + enable-method = "spin-table"; + cpu-release-addr = <0x0 0x000000e0>; + d-cache-size = <0x8000>; + d-cache-line-size = <64>; + d-cache-sets = <128>; // 32KiB(size)/64(line-size)=512ways/4-way set + i-cache-size = <0x8000>; + i-cache-line-size = <64>; + i-cache-sets = <256>; // 32KiB(size)/64(line-size)=512ways/2-way set + next-level-cache = <&l2>; + }; + + cpu2: cpu@2 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <2>; + enable-method = "spin-table"; + cpu-release-addr = <0x0 0x000000e8>; + d-cache-size = <0x8000>; + d-cache-line-size = <64>; + d-cache-sets = <128>; // 32KiB(size)/64(line-size)=512ways/4-way set + i-cache-size = <0x8000>; + i-cache-line-size = <64>; + i-cache-sets = <256>; // 32KiB(size)/64(line-size)=512ways/2-way set + next-level-cache = <&l2>; + }; + + cpu3: cpu@3 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <3>; + enable-method = "spin-table"; + cpu-release-addr = <0x0 0x000000f0>; + d-cache-size = <0x8000>; + d-cache-line-size = <64>; + d-cache-sets = <128>; // 32KiB(size)/64(line-size)=512ways/4-way set + i-cache-size = <0x8000>; + i-cache-line-size = <64>; + i-cache-sets = <256>; // 32KiB(size)/64(line-size)=512ways/2-way set + next-level-cache = <&l2>; + }; + + /* Source for cache-line-size + cache-sets + * https://developer.arm.com/documentation/ddi0500 + * /e/level-2-memory-system/about-the-l2-memory-system?lang=en + * Source for cache-size + * https://datasheets.raspberrypi.com/cm/cm1-and-cm3-datasheet.pdf + */ + l2: l2-cache0 { + compatible = "cache"; + cache-unified; + cache-size = <0x80000>; + cache-line-size = <64>; + cache-sets = <512>; // 512KiB(size)/64(line-size)=8192ways/16-way set + cache-level = <2>; + }; + }; +}; + +/* Make the BCM2835-style global interrupt controller be a child of the + * CPU-local interrupt controller. + */ +&intc { + compatible = "brcm,bcm2836-armctrl-ic"; + reg = <0x7e00b200 0x200>; + interrupt-parent = <&local_intc>; + interrupts = <8 IRQ_TYPE_LEVEL_HIGH>; +}; + +&cpu_thermal { + coefficients = <(-538) 412000>; +}; + +/* enable thermal sensor with the correct compatible property set */ +&thermal { + compatible = "brcm,bcm2837-thermal"; + status = "okay"; +}; diff --git a/dts/src/arm/broadcom/bcm283x-rpi-lan7515.dtsi b/dts/src/arm/broadcom/bcm283x-rpi-lan7515.dtsi new file mode 100644 index 0000000000..70bece63f9 --- /dev/null +++ b/dts/src/arm/broadcom/bcm283x-rpi-lan7515.dtsi @@ -0,0 +1,41 @@ +// SPDX-License-Identifier: GPL-2.0 +#include <dt-bindings/net/microchip-lan78xx.h> + +/ { + aliases { + ethernet0 = ðernet; + }; +}; + +&usb { + usb-port@1 { + compatible = "usb424,2514"; + reg = <1>; + #address-cells = <1>; + #size-cells = <0>; + + usb-port@1 { + compatible = "usb424,2514"; + reg = <1>; + #address-cells = <1>; + #size-cells = <0>; + + ethernet: ethernet@1 { + compatible = "usb424,7800"; + reg = <1>; + + mdio { + #address-cells = <0x1>; + #size-cells = <0x0>; + eth_phy: ethernet-phy@1 { + reg = <1>; + microchip,led-modes = < + LAN78XX_LINK_1000_ACTIVITY + LAN78XX_LINK_10_100_ACTIVITY + >; + }; + }; + }; + }; + }; +}; diff --git a/dts/src/arm/broadcom/bcm283x-rpi-led-deprecated.dtsi b/dts/src/arm/broadcom/bcm283x-rpi-led-deprecated.dtsi new file mode 100644 index 0000000000..f83e56de1a --- /dev/null +++ b/dts/src/arm/broadcom/bcm283x-rpi-led-deprecated.dtsi @@ -0,0 +1,18 @@ +// SPDX-License-Identifier: GPL-2.0 + +/ { + /* + * This file provides the now deprecated ACT LED to the + * Raspberry Pi boards. Please don't include this file + * for new boards! + */ + leds: leds { + compatible = "gpio-leds"; + + led_act: led-act { + label = "ACT"; + default-state = "keep"; + linux,default-trigger = "heartbeat"; + }; + }; +}; diff --git a/dts/src/arm/broadcom/bcm283x-rpi-smsc9512.dtsi b/dts/src/arm/broadcom/bcm283x-rpi-smsc9512.dtsi new file mode 100644 index 0000000000..882b138070 --- /dev/null +++ b/dts/src/arm/broadcom/bcm283x-rpi-smsc9512.dtsi @@ -0,0 +1,20 @@ +// SPDX-License-Identifier: GPL-2.0 +/ { + aliases { + ethernet0 = ðernet; + }; +}; + +&usb { + usb1@1 { + compatible = "usb424,9512"; + reg = <1>; + #address-cells = <1>; + #size-cells = <0>; + + ethernet: ethernet@1 { + compatible = "usb424,ec00"; + reg = <1>; + }; + }; +}; diff --git a/dts/src/arm/broadcom/bcm283x-rpi-smsc9514.dtsi b/dts/src/arm/broadcom/bcm283x-rpi-smsc9514.dtsi new file mode 100644 index 0000000000..4273b90b53 --- /dev/null +++ b/dts/src/arm/broadcom/bcm283x-rpi-smsc9514.dtsi @@ -0,0 +1,19 @@ +/ { + aliases { + ethernet0 = ðernet; + }; +}; + +&usb { + usb1@1 { + compatible = "usb424,9514"; + reg = <1>; + #address-cells = <1>; + #size-cells = <0>; + + ethernet: ethernet@1 { + compatible = "usb424,ec00"; + reg = <1>; + }; + }; +}; diff --git a/dts/src/arm/broadcom/bcm283x-rpi-usb-host.dtsi b/dts/src/arm/broadcom/bcm283x-rpi-usb-host.dtsi new file mode 100644 index 0000000000..73f4ece8dc --- /dev/null +++ b/dts/src/arm/broadcom/bcm283x-rpi-usb-host.dtsi @@ -0,0 +1,3 @@ +&usb { + dr_mode = "host"; +}; diff --git a/dts/src/arm/broadcom/bcm283x-rpi-usb-otg.dtsi b/dts/src/arm/broadcom/bcm283x-rpi-usb-otg.dtsi new file mode 100644 index 0000000000..e2fd9610e1 --- /dev/null +++ b/dts/src/arm/broadcom/bcm283x-rpi-usb-otg.dtsi @@ -0,0 +1,11 @@ +// SPDX-License-Identifier: GPL-2.0 +&usb { + dr_mode = "otg"; + g-rx-fifo-size = <256>; + g-np-tx-fifo-size = <32>; + /* + * According to dwc2 the sum of all device EP + * fifo sizes shouldn't exceed 3776 bytes. + */ + g-tx-fifo-size = <256 256 512 512 512 768 768>; +}; diff --git a/dts/src/arm/broadcom/bcm283x-rpi-usb-peripheral.dtsi b/dts/src/arm/broadcom/bcm283x-rpi-usb-peripheral.dtsi new file mode 100644 index 0000000000..0ff0e9e253 --- /dev/null +++ b/dts/src/arm/broadcom/bcm283x-rpi-usb-peripheral.dtsi @@ -0,0 +1,7 @@ +// SPDX-License-Identifier: GPL-2.0 +&usb { + dr_mode = "peripheral"; + g-rx-fifo-size = <256>; + g-np-tx-fifo-size = <32>; + g-tx-fifo-size = <256 256 512 512 512 768 768>; +}; diff --git a/dts/src/arm/broadcom/bcm283x-rpi-wifi-bt.dtsi b/dts/src/arm/broadcom/bcm283x-rpi-wifi-bt.dtsi new file mode 100644 index 0000000000..0b64cc1994 --- /dev/null +++ b/dts/src/arm/broadcom/bcm283x-rpi-wifi-bt.dtsi @@ -0,0 +1,34 @@ +// SPDX-License-Identifier: GPL-2.0 + +/ { + wifi_pwrseq: wifi-pwrseq { + compatible = "mmc-pwrseq-simple"; + }; +}; + +/* SDHCI is used to control the SDIO for wireless */ +&sdhci { + #address-cells = <1>; + #size-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&emmc_gpio34>; + bus-width = <4>; + non-removable; + mmc-pwrseq = <&wifi_pwrseq>; + status = "okay"; + + brcmf: wifi@1 { + reg = <1>; + compatible = "brcm,bcm4329-fmac"; + }; +}; + +/* uart0 communicates with the BT module */ +&uart0 { + status = "okay"; + + bt: bluetooth { + compatible = "brcm,bcm43438-bt"; + max-speed = <2000000>; + }; +}; diff --git a/dts/src/arm/broadcom/bcm283x.dtsi b/dts/src/arm/broadcom/bcm283x.dtsi new file mode 100644 index 0000000000..2ca8a2505a --- /dev/null +++ b/dts/src/arm/broadcom/bcm283x.dtsi @@ -0,0 +1,501 @@ +#include <dt-bindings/pinctrl/bcm2835.h> +#include <dt-bindings/clock/bcm2835.h> +#include <dt-bindings/clock/bcm2835-aux.h> +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/soc/bcm2835-pm.h> + +/* firmware-provided startup stubs live here, where the secondary CPUs are + * spinning. + */ +/memreserve/ 0x00000000 0x00001000; + +/* This include file covers the common peripherals and configuration between + * bcm2835 and bcm2836 implementations, leaving the CPU configuration to + * bcm2835.dtsi and bcm2836.dtsi. + */ + +/ { + compatible = "brcm,bcm2835"; + model = "BCM2835"; + #address-cells = <1>; + #size-cells = <1>; + + aliases { + serial0 = &uart0; + serial1 = &uart1; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + rmem: reserved-memory { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + cma: linux,cma { + compatible = "shared-dma-pool"; + size = <0x4000000>; /* 64MB */ + reusable; + linux,cma-default; + }; + }; + + thermal-zones { + cpu_thermal: cpu-thermal { + polling-delay-passive = <0>; + polling-delay = <1000>; + + trips { + cpu-crit { + temperature = <90000>; + hysteresis = <0>; + type = "critical"; + }; + }; + + cooling-maps { + }; + }; + }; + + soc { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + + system_timer: timer@7e003000 { + compatible = "brcm,bcm2835-system-timer"; + reg = <0x7e003000 0x1000>; + interrupts = <1 0>, <1 1>, <1 2>, <1 3>; + /* This could be a reference to BCM2835_CLOCK_TIMER, + * but we don't have the driver using the common clock + * support yet. + */ + clock-frequency = <1000000>; + }; + + txp: txp@7e004000 { + compatible = "brcm,bcm2835-txp"; + reg = <0x7e004000 0x20>; + interrupts = <1 11>; + }; + + clocks: cprman@7e101000 { + compatible = "brcm,bcm2835-cprman"; + #clock-cells = <1>; + reg = <0x7e101000 0x2000>; + + /* CPRMAN derives almost everything from the + * platform's oscillator. However, the DSI + * pixel clocks come from the DSI analog PHY. + */ + clocks = <&clk_osc>, + <&dsi0 0>, <&dsi0 1>, <&dsi0 2>, + <&dsi1 0>, <&dsi1 1>, <&dsi1 2>; + }; + + mailbox: mailbox@7e00b880 { + compatible = "brcm,bcm2835-mbox"; + reg = <0x7e00b880 0x40>; + interrupts = <0 1>; + #mbox-cells = <0>; + }; + + gpio: gpio@7e200000 { + compatible = "brcm,bcm2835-gpio"; + reg = <0x7e200000 0xb4>; + /* + * The GPIO IP block is designed for 3 banks of GPIOs. + * Each bank has a GPIO interrupt for itself. + * There is an overall "any bank" interrupt. + * In order, these are GIC interrupts 17, 18, 19, 20. + * Since the BCM2835 only has 2 banks, the 2nd bank + * interrupt output appears to be mirrored onto the + * 3rd bank's interrupt signal. + * So, a bank0 interrupt shows up on 17, 20, and + * a bank1 interrupt shows up on 18, 19, 20! + */ + interrupts = <2 17>, <2 18>, <2 19>, <2 20>; + + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + + gpio-ranges = <&gpio 0 0 54>; + + /* Defines common pin muxing groups + * + * While each pin can have its mux selected + * for various functions individually, some + * groups only make sense to switch to a + * particular function together. + */ + dpi_gpio0: dpi-gpio0 { + brcm,pins = <0 1 2 3 4 5 6 7 8 9 10 11 + 12 13 14 15 16 17 18 19 + 20 21 22 23 24 25 26 27>; + brcm,function = <BCM2835_FSEL_ALT2>; + }; + emmc_gpio22: emmc-gpio22 { + brcm,pins = <22 23 24 25 26 27>; + brcm,function = <BCM2835_FSEL_ALT3>; + }; + emmc_gpio34: emmc-gpio34 { + brcm,pins = <34 35 36 37 38 39>; + brcm,function = <BCM2835_FSEL_ALT3>; + brcm,pull = <BCM2835_PUD_OFF + BCM2835_PUD_UP + BCM2835_PUD_UP + BCM2835_PUD_UP + BCM2835_PUD_UP + BCM2835_PUD_UP>; + }; + emmc_gpio48: emmc-gpio48 { + brcm,pins = <48 49 50 51 52 53>; + brcm,function = <BCM2835_FSEL_ALT3>; + }; + + gpclk0_gpio4: gpclk0-gpio4 { + brcm,pins = <4>; + brcm,function = <BCM2835_FSEL_ALT0>; + }; + gpclk1_gpio5: gpclk1-gpio5 { + brcm,pins = <5>; + brcm,function = <BCM2835_FSEL_ALT0>; + }; + gpclk1_gpio42: gpclk1-gpio42 { + brcm,pins = <42>; + brcm,function = <BCM2835_FSEL_ALT0>; + }; + gpclk1_gpio44: gpclk1-gpio44 { + brcm,pins = <44>; + brcm,function = <BCM2835_FSEL_ALT0>; + }; + gpclk2_gpio6: gpclk2-gpio6 { + brcm,pins = <6>; + brcm,function = <BCM2835_FSEL_ALT0>; + }; + gpclk2_gpio43: gpclk2-gpio43 { + brcm,pins = <43>; + brcm,function = <BCM2835_FSEL_ALT0>; + brcm,pull = <BCM2835_PUD_OFF>; + }; + + i2c0_gpio0: i2c0-gpio0 { + brcm,pins = <0 1>; + brcm,function = <BCM2835_FSEL_ALT0>; + }; + i2c0_gpio28: i2c0-gpio28 { + brcm,pins = <28 29>; + brcm,function = <BCM2835_FSEL_ALT0>; + }; + i2c0_gpio44: i2c0-gpio44 { + brcm,pins = <44 45>; + brcm,function = <BCM2835_FSEL_ALT1>; + }; + i2c1_gpio2: i2c1-gpio2 { + brcm,pins = <2 3>; + brcm,function = <BCM2835_FSEL_ALT0>; + }; + i2c1_gpio44: i2c1-gpio44 { + brcm,pins = <44 45>; + brcm,function = <BCM2835_FSEL_ALT2>; + }; + + jtag_gpio22: jtag-gpio22 { + brcm,pins = <22 23 24 25 26 27>; + brcm,function = <BCM2835_FSEL_ALT4>; + }; + + pcm_gpio18: pcm-gpio18 { + brcm,pins = <18 19 20 21>; + brcm,function = <BCM2835_FSEL_ALT0>; + }; + pcm_gpio28: pcm-gpio28 { + brcm,pins = <28 29 30 31>; + brcm,function = <BCM2835_FSEL_ALT2>; + }; + + sdhost_gpio48: sdhost-gpio48 { + brcm,pins = <48 49 50 51 52 53>; + brcm,function = <BCM2835_FSEL_ALT0>; + }; + + spi0_gpio7: spi0-gpio7 { + brcm,pins = <7 8 9 10 11>; + brcm,function = <BCM2835_FSEL_ALT0>; + }; + spi0_gpio35: spi0-gpio35 { + brcm,pins = <35 36 37 38 39>; + brcm,function = <BCM2835_FSEL_ALT0>; + }; + spi1_gpio16: spi1-gpio16 { + brcm,pins = <16 17 18 19 20 21>; + brcm,function = <BCM2835_FSEL_ALT4>; + }; + spi2_gpio40: spi2-gpio40 { + brcm,pins = <40 41 42 43 44 45>; + brcm,function = <BCM2835_FSEL_ALT4>; + }; + + uart0_gpio14: uart0-gpio14 { + brcm,pins = <14 15>; + brcm,function = <BCM2835_FSEL_ALT0>; + }; + /* Separate from the uart0_gpio14 group + * because it conflicts with spi1_gpio16, and + * people often run uart0 on the two pins + * without flow control. + */ + uart0_ctsrts_gpio16: uart0-ctsrts-gpio16 { + brcm,pins = <16 17>; + brcm,function = <BCM2835_FSEL_ALT3>; + }; + uart0_ctsrts_gpio30: uart0-ctsrts-gpio30 { + brcm,pins = <30 31>; + brcm,function = <BCM2835_FSEL_ALT3>; + brcm,pull = <BCM2835_PUD_UP BCM2835_PUD_OFF>; + }; + uart0_gpio32: uart0-gpio32 { + brcm,pins = <32 33>; + brcm,function = <BCM2835_FSEL_ALT3>; + brcm,pull = <BCM2835_PUD_OFF BCM2835_PUD_UP>; + }; + uart0_gpio36: uart0-gpio36 { + brcm,pins = <36 37>; + brcm,function = <BCM2835_FSEL_ALT2>; + }; + uart0_ctsrts_gpio38: uart0-ctsrts-gpio38 { + brcm,pins = <38 39>; + brcm,function = <BCM2835_FSEL_ALT2>; + }; + + uart1_gpio14: uart1-gpio14 { + brcm,pins = <14 15>; + brcm,function = <BCM2835_FSEL_ALT5>; + }; + uart1_ctsrts_gpio16: uart1-ctsrts-gpio16 { + brcm,pins = <16 17>; + brcm,function = <BCM2835_FSEL_ALT5>; + }; + uart1_gpio32: uart1-gpio32 { + brcm,pins = <32 33>; + brcm,function = <BCM2835_FSEL_ALT5>; + }; + uart1_ctsrts_gpio30: uart1-ctsrts-gpio30 { + brcm,pins = <30 31>; + brcm,function = <BCM2835_FSEL_ALT5>; + }; + uart1_gpio40: uart1-gpio40 { + brcm,pins = <40 41>; + brcm,function = <BCM2835_FSEL_ALT5>; + }; + uart1_ctsrts_gpio42: uart1-ctsrts-gpio42 { + brcm,pins = <42 43>; + brcm,function = <BCM2835_FSEL_ALT5>; + }; + }; + + uart0: serial@7e201000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0x7e201000 0x200>; + interrupts = <2 25>; + clocks = <&clocks BCM2835_CLOCK_UART>, + <&clocks BCM2835_CLOCK_VPU>; + clock-names = "uartclk", "apb_pclk"; + arm,primecell-periphid = <0x00241011>; + }; + + sdhost: mmc@7e202000 { + compatible = "brcm,bcm2835-sdhost"; + reg = <0x7e202000 0x100>; + interrupts = <2 24>; + clocks = <&clocks BCM2835_CLOCK_VPU>; + status = "disabled"; + }; + + i2s: i2s@7e203000 { + compatible = "brcm,bcm2835-i2s"; + reg = <0x7e203000 0x24>; + clocks = <&clocks BCM2835_CLOCK_PCM>; + status = "disabled"; + }; + + spi: spi@7e204000 { + compatible = "brcm,bcm2835-spi"; + reg = <0x7e204000 0x200>; + interrupts = <2 22>; + clocks = <&clocks BCM2835_CLOCK_VPU>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c0: i2c@7e205000 { + compatible = "brcm,bcm2835-i2c"; + reg = <0x7e205000 0x200>; + interrupts = <2 21>; + clocks = <&clocks BCM2835_CLOCK_VPU>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + dpi: dpi@7e208000 { + compatible = "brcm,bcm2835-dpi"; + reg = <0x7e208000 0x8c>; + clocks = <&clocks BCM2835_CLOCK_VPU>, + <&clocks BCM2835_CLOCK_DPI>; + clock-names = "core", "pixel"; + status = "disabled"; + }; + + dsi0: dsi@7e209000 { + compatible = "brcm,bcm2835-dsi0"; + reg = <0x7e209000 0x78>; + interrupts = <2 4>; + #address-cells = <1>; + #size-cells = <0>; + #clock-cells = <1>; + + clocks = <&clocks BCM2835_PLLA_DSI0>, + <&clocks BCM2835_CLOCK_DSI0E>, + <&clocks BCM2835_CLOCK_DSI0P>; + clock-names = "phy", "escape", "pixel"; + + clock-output-names = "dsi0_byte", + "dsi0_ddr2", + "dsi0_ddr"; + + status = "disabled"; + }; + + aux: aux@7e215000 { + compatible = "brcm,bcm2835-aux"; + #clock-cells = <1>; + reg = <0x7e215000 0x8>; + clocks = <&clocks BCM2835_CLOCK_VPU>; + }; + + uart1: serial@7e215040 { + compatible = "brcm,bcm2835-aux-uart"; + reg = <0x7e215040 0x40>; + interrupts = <1 29>; + clocks = <&aux BCM2835_AUX_CLOCK_UART>; + status = "disabled"; + }; + + spi1: spi@7e215080 { + compatible = "brcm,bcm2835-aux-spi"; + reg = <0x7e215080 0x40>; + interrupts = <1 29>; + clocks = <&aux BCM2835_AUX_CLOCK_SPI1>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi2: spi@7e2150c0 { + compatible = "brcm,bcm2835-aux-spi"; + reg = <0x7e2150c0 0x40>; + interrupts = <1 29>; + clocks = <&aux BCM2835_AUX_CLOCK_SPI2>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + pwm: pwm@7e20c000 { + compatible = "brcm,bcm2835-pwm"; + reg = <0x7e20c000 0x28>; + clocks = <&clocks BCM2835_CLOCK_PWM>; + assigned-clocks = <&clocks BCM2835_CLOCK_PWM>; + assigned-clock-rates = <10000000>; + #pwm-cells = <3>; + status = "disabled"; + }; + + sdhci: mmc@7e300000 { + compatible = "brcm,bcm2835-sdhci"; + reg = <0x7e300000 0x100>; + interrupts = <2 30>; + clocks = <&clocks BCM2835_CLOCK_EMMC>; + status = "disabled"; + }; + + hvs@7e400000 { + compatible = "brcm,bcm2835-hvs"; + reg = <0x7e400000 0x6000>; + interrupts = <2 1>; + }; + + dsi1: dsi@7e700000 { + compatible = "brcm,bcm2835-dsi1"; + reg = <0x7e700000 0x8c>; + interrupts = <2 12>; + #address-cells = <1>; + #size-cells = <0>; + #clock-cells = <1>; + + clocks = <&clocks BCM2835_PLLD_DSI1>, + <&clocks BCM2835_CLOCK_DSI1E>, + <&clocks BCM2835_CLOCK_DSI1P>; + clock-names = "phy", "escape", "pixel"; + + clock-output-names = "dsi1_byte", + "dsi1_ddr2", + "dsi1_ddr"; + + status = "disabled"; + }; + + i2c1: i2c@7e804000 { + compatible = "brcm,bcm2835-i2c"; + reg = <0x7e804000 0x1000>; + interrupts = <2 21>; + clocks = <&clocks BCM2835_CLOCK_VPU>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + usb: usb@7e980000 { + compatible = "brcm,bcm2835-usb"; + reg = <0x7e980000 0x10000>; + interrupts = <1 9>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&clk_usb>; + clock-names = "otg"; + phys = <&usbphy>; + phy-names = "usb2-phy"; + }; + }; + + clocks { + /* The oscillator is the root of the clock tree. */ + clk_osc: clk-osc { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-output-names = "osc"; + clock-frequency = <19200000>; + }; + + clk_usb: clk-usb { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-output-names = "otg"; + clock-frequency = <480000000>; + }; + }; + + usbphy: phy { + compatible = "usb-nop-xceiv"; + #phy-cells = <0>; + }; +}; diff --git a/dts/src/arm/broadcom/bcm4708-asus-rt-ac56u.dts b/dts/src/arm/broadcom/bcm4708-asus-rt-ac56u.dts new file mode 100644 index 0000000000..c80ac16ad9 --- /dev/null +++ b/dts/src/arm/broadcom/bcm4708-asus-rt-ac56u.dts @@ -0,0 +1,94 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Broadcom BCM470X / BCM5301X ARM platform code. + * DTS for Asus RT-AC56U + * + * Copyright (C) 2015 RafaÅ‚ MiÅ‚ecki <zajec5@gmail.com> + */ + +/dts-v1/; + +#include "bcm4708.dtsi" +#include "bcm5301x-nand-cs0-bch8.dtsi" + +/ { + compatible = "asus,rt-ac56u", "brcm,bcm4708"; + model = "Asus RT-AC56U (BCM4708)"; + + chosen { + bootargs = "console=ttyS0,115200"; + }; + + memory@0 { + device_type = "memory"; + reg = <0x00000000 0x08000000>, + <0x88000000 0x08000000>; + }; + + leds { + compatible = "gpio-leds"; + + led-usb3 { + label = "bcm53xx:blue:usb3"; + gpios = <&chipcommon 0 GPIO_ACTIVE_LOW>; + }; + + led-wan { + label = "bcm53xx:blue:wan"; + gpios = <&chipcommon 1 GPIO_ACTIVE_LOW>; + }; + + led-lan { + label = "bcm53xx:blue:lan"; + gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>; + }; + + led-power { + label = "bcm53xx:blue:power"; + gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>; + linux,default-trigger = "default-on"; + }; + + led-all { + label = "bcm53xx:blue:all"; + gpios = <&chipcommon 4 GPIO_ACTIVE_LOW>; + linux,default-trigger = "default-on"; + }; + + led-2ghz { + label = "bcm53xx:blue:2ghz"; + gpios = <&chipcommon 6 GPIO_ACTIVE_LOW>; + }; + + led-usb2 { + label = "bcm53xx:blue:usb2"; + gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + + button-rfkill { + label = "WiFi"; + linux,code = <KEY_RFKILL>; + gpios = <&chipcommon 7 GPIO_ACTIVE_LOW>; + }; + + button-restart { + label = "Reset"; + linux,code = <KEY_RESTART>; + gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>; + }; + + button-wps { + label = "WPS"; + linux,code = <KEY_WPS_BUTTON>; + gpios = <&chipcommon 15 GPIO_ACTIVE_LOW>; + }; + }; +}; + +&usb3_phy { + status = "okay"; +}; diff --git a/dts/src/arm/broadcom/bcm4708-asus-rt-ac68u.dts b/dts/src/arm/broadcom/bcm4708-asus-rt-ac68u.dts new file mode 100644 index 0000000000..3fe17bd7b8 --- /dev/null +++ b/dts/src/arm/broadcom/bcm4708-asus-rt-ac68u.dts @@ -0,0 +1,85 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Broadcom BCM470X / BCM5301X ARM platform code. + * DTS for Asus RT-AC68U + * + * Copyright (C) 2015 RafaÅ‚ MiÅ‚ecki <zajec5@gmail.com> + */ + +/dts-v1/; + +#include "bcm4708.dtsi" +#include "bcm5301x-nand-cs0-bch8.dtsi" + +/ { + compatible = "asus,rt-ac68u", "brcm,bcm4708"; + model = "Asus RT-AC68U (BCM4708)"; + + chosen { + bootargs = "console=ttyS0,115200"; + }; + + memory@0 { + device_type = "memory"; + reg = <0x00000000 0x08000000>, + <0x88000000 0x08000000>; + }; + + leds { + compatible = "gpio-leds"; + + led-usb2 { + label = "bcm53xx:blue:usb2"; + gpios = <&chipcommon 0 GPIO_ACTIVE_LOW>; + }; + + led-power { + label = "bcm53xx:blue:power"; + gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>; + linux,default-trigger = "default-on"; + }; + + led-logo { + label = "bcm53xx:white:logo"; + gpios = <&chipcommon 4 GPIO_ACTIVE_LOW>; + linux,default-trigger = "default-on"; + }; + + led-usb3 { + label = "bcm53xx:blue:usb3"; + gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + + button-brightness { + label = "Backlight"; + linux,code = <KEY_BRIGHTNESS_ZERO>; + gpios = <&chipcommon 5 GPIO_ACTIVE_LOW>; + }; + + button-wps { + label = "WPS"; + linux,code = <KEY_WPS_BUTTON>; + gpios = <&chipcommon 7 GPIO_ACTIVE_LOW>; + }; + + button-restart { + label = "Reset"; + linux,code = <KEY_RESTART>; + gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>; + }; + + button-rfkill { + label = "WiFi"; + linux,code = <KEY_RFKILL>; + gpios = <&chipcommon 15 GPIO_ACTIVE_LOW>; + }; + }; +}; + +&usb3_phy { + status = "okay"; +}; diff --git a/dts/src/arm/broadcom/bcm4708-buffalo-wzr-1166dhp-common.dtsi b/dts/src/arm/broadcom/bcm4708-buffalo-wzr-1166dhp-common.dtsi new file mode 100644 index 0000000000..9f9084269e --- /dev/null +++ b/dts/src/arm/broadcom/bcm4708-buffalo-wzr-1166dhp-common.dtsi @@ -0,0 +1,193 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Broadcom BCM470X / BCM5301X ARM platform code. + * DTS for Buffalo WZR-1166DHP and WZR-1166DHP2 + * + * Copyright (C) 2014 RafaÅ‚ MiÅ‚ecki <zajec5@gmail.com> + * Copyright (C) 2022 SHIMAMOTO Takayoshi <takayoshi.shimamoto.360@gmail.com> + */ + + +#include "bcm4708.dtsi" +#include "bcm5301x-nand-cs0-bch8.dtsi" +#include <dt-bindings/leds/common.h> + +/ { + spi { + compatible = "spi-gpio"; + num-chipselects = <1>; + sck-gpios = <&chipcommon 7 0>; + mosi-gpios = <&chipcommon 4 0>; + cs-gpios = <&chipcommon 6 0>; + #address-cells = <1>; + #size-cells = <0>; + + hc595: gpio_spi@0 { + compatible = "fairchild,74hc595"; + reg = <0>; + registers-number = <1>; + spi-max-frequency = <100000>; + + gpio-controller; + #gpio-cells = <2>; + + }; + }; + + leds { + compatible = "gpio-leds"; + + led-usb { + /* label = "bcm53xx:blue:usb"; */ + function = LED_FUNCTION_USB; + color = <LED_COLOR_ID_BLUE>; + gpios = <&hc595 0 GPIO_ACTIVE_HIGH>; + trigger-sources = <&ohci_port1>, <&ehci_port1>, + <&xhci_port1>, <&ohci_port2>, + <&ehci_port2>; + linux,default-trigger = "usbport"; + }; + + led-power0 { + /* label = "bcm53xx:red:power"; */ + function = LED_FUNCTION_FAULT; + color = <LED_COLOR_ID_RED>; + gpios = <&hc595 1 GPIO_ACTIVE_HIGH>; + }; + + led-power1 { + /* label = "bcm53xx:white:power"; */ + function = LED_FUNCTION_POWER; + color = <LED_COLOR_ID_WHITE>; + gpios = <&hc595 2 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "default-on"; + }; + + led-router0 { + /* label = "bcm53xx:blue:router"; */ + function = LED_FUNCTION_STATUS; + color = <LED_COLOR_ID_BLUE>; + gpios = <&hc595 3 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "default-on"; + }; + + led-router1 { + /* label = "bcm53xx:amber:router"; */ + function = LED_FUNCTION_STATUS; + color = <LED_COLOR_ID_AMBER>; + gpios = <&hc595 4 GPIO_ACTIVE_HIGH>; + }; + + led-wan { + /* label = "bcm53xx:blue:wan"; */ + function = LED_FUNCTION_WAN; + color = <LED_COLOR_ID_BLUE>; + gpios = <&hc595 5 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "default-on"; + }; + + led-wireless0 { + /* label = "bcm53xx:blue:wireless"; */ + function = LED_FUNCTION_WLAN; + color = <LED_COLOR_ID_BLUE>; + gpios = <&hc595 6 GPIO_ACTIVE_HIGH>; + }; + + led-wireless1 { + /* label = "bcm53xx:amber:wireless"; */ + function = LED_FUNCTION_WLAN; + color = <LED_COLOR_ID_AMBER>; + gpios = <&hc595 7 GPIO_ACTIVE_HIGH>; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + + button-restart { + label = "Reset"; + linux,code = <KEY_RESTART>; + gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>; + }; + + button-aoss { + label = "AOSS"; + linux,code = <KEY_WPS_BUTTON>; + gpios = <&chipcommon 12 GPIO_ACTIVE_LOW>; + }; + + /* Commit mode set by switch? */ + button-mode { + label = "Mode"; + linux,code = <KEY_SETUP>; + gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>; + }; + + /* Switch: AP mode */ + button-sw-ap { + label = "AP"; + linux,code = <BTN_0>; + gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>; + }; + + button-eject { + label = "USB eject"; + linux,code = <KEY_EJECTCD>; + gpios = <&chipcommon 15 GPIO_ACTIVE_LOW>; + }; + }; +}; + +&usb2 { + vcc-gpio = <&chipcommon 9 GPIO_ACTIVE_HIGH>; +}; + +&usb3 { + vcc-gpio = <&chipcommon 10 GPIO_ACTIVE_LOW>; +}; + +&spi_nor { + status = "okay"; +}; + +&usb3_phy { + status = "okay"; +}; + +&srab { + status = "okay"; + + ports { + port@0 { + label = "lan1"; + }; + + port@1 { + label = "lan2"; + }; + + port@2 { + label = "lan3"; + }; + + port@3 { + label = "lan4"; + }; + + port@4 { + label = "wan"; + }; + + port@5 { + label = "cpu"; + }; + + port@7 { + status = "disabled"; + }; + + port@8 { + status = "disabled"; + }; + }; +}; diff --git a/dts/src/arm/broadcom/bcm4708-buffalo-wzr-1166dhp.dts b/dts/src/arm/broadcom/bcm4708-buffalo-wzr-1166dhp.dts new file mode 100644 index 0000000000..8e506269fa --- /dev/null +++ b/dts/src/arm/broadcom/bcm4708-buffalo-wzr-1166dhp.dts @@ -0,0 +1,26 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Device Tree Bindigs for Buffalo WZR-1166DHP + * + * Copyright (C) 2022 SHIMAMOTO Takayoshi <takayoshi.shimamoto.360@gmail.com> + */ + +/dts-v1/; + +#include "bcm4708-buffalo-wzr-1166dhp-common.dtsi" + +/ { + compatible = "buffalo,wzr-1166dhp", "brcm,bcm4708"; + model = "Buffalo WZR-1166DHP"; + + chosen { + bootargs = "console=ttyS0,115200"; + }; + + memory@0 { + device_type = "memory"; + reg = <0x00000000 0x08000000>, + <0x88000000 0x18000000>; + }; + +}; diff --git a/dts/src/arm/broadcom/bcm4708-buffalo-wzr-1166dhp2.dts b/dts/src/arm/broadcom/bcm4708-buffalo-wzr-1166dhp2.dts new file mode 100644 index 0000000000..5961290270 --- /dev/null +++ b/dts/src/arm/broadcom/bcm4708-buffalo-wzr-1166dhp2.dts @@ -0,0 +1,26 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Device Tree Bindigs for Buffalo WZR-1166DHP2 + * + * Copyright (C) 2022 SHIMAMOTO Takayoshi <takayoshi.shimamoto.360@gmail.com> + */ + +/dts-v1/; + +#include "bcm4708-buffalo-wzr-1166dhp-common.dtsi" + +/ { + compatible = "buffalo,wzr-1166dhp2", "brcm,bcm4708"; + model = "Buffalo WZR-1166DHP2"; + + chosen { + bootargs = "console=ttyS0,115200"; + }; + + memory@0 { + device_type = "memory"; + reg = <0x00000000 0x08000000>, + <0x88000000 0x08000000>; + }; + +}; diff --git a/dts/src/arm/broadcom/bcm4708-buffalo-wzr-1750dhp.dts b/dts/src/arm/broadcom/bcm4708-buffalo-wzr-1750dhp.dts new file mode 100644 index 0000000000..95ef6ca721 --- /dev/null +++ b/dts/src/arm/broadcom/bcm4708-buffalo-wzr-1750dhp.dts @@ -0,0 +1,151 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Broadcom BCM470X / BCM5301X ARM platform code. + * DTS for Buffalo WZR-1750DHP + * + * Copyright (C) 2014 RafaÅ‚ MiÅ‚ecki <zajec5@gmail.com> + */ + +/dts-v1/; + +#include "bcm4708.dtsi" +#include "bcm5301x-nand-cs0-bch8.dtsi" + +/ { + compatible = "buffalo,wzr-1750dhp", "brcm,bcm4708"; + model = "Buffalo WZR-1750DHP (BCM4708)"; + + chosen { + bootargs = "console=ttyS0,115200 earlycon"; + }; + + memory@0 { + device_type = "memory"; + reg = <0x00000000 0x08000000>, + <0x88000000 0x18000000>; + }; + + spi { + compatible = "spi-gpio"; + num-chipselects = <1>; + sck-gpios = <&chipcommon 7 0>; + mosi-gpios = <&chipcommon 4 0>; + cs-gpios = <&chipcommon 6 0>; + #address-cells = <1>; + #size-cells = <0>; + + hc595: gpio_spi@0 { + compatible = "fairchild,74hc595"; + reg = <0>; + registers-number = <1>; + spi-max-frequency = <100000>; + + gpio-controller; + #gpio-cells = <2>; + + }; + }; + + leds { + compatible = "gpio-leds"; + + led-usb { + label = "bcm53xx:blue:usb"; + gpios = <&hc595 0 GPIO_ACTIVE_HIGH>; + trigger-sources = <&ohci_port1>, <&ehci_port1>, + <&xhci_port1>, <&ohci_port2>, + <&ehci_port2>; + linux,default-trigger = "usbport"; + }; + + led-power0 { + label = "bcm53xx:red:power"; + gpios = <&hc595 1 GPIO_ACTIVE_HIGH>; + }; + + led-power1 { + label = "bcm53xx:white:power"; + gpios = <&hc595 2 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "default-on"; + }; + + led-router0 { + label = "bcm53xx:blue:router"; + gpios = <&hc595 3 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "default-on"; + }; + + led-router1 { + label = "bcm53xx:amber:router"; + gpios = <&hc595 4 GPIO_ACTIVE_HIGH>; + }; + + led-wan { + label = "bcm53xx:blue:wan"; + gpios = <&hc595 5 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "default-on"; + }; + + led-wireless0 { + label = "bcm53xx:blue:wireless"; + gpios = <&hc595 6 GPIO_ACTIVE_HIGH>; + }; + + led-wireless1 { + label = "bcm53xx:amber:wireless"; + gpios = <&hc595 7 GPIO_ACTIVE_HIGH>; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + + button-restart { + label = "Reset"; + linux,code = <KEY_RESTART>; + gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>; + }; + + button-aoss { + label = "AOSS"; + linux,code = <KEY_WPS_BUTTON>; + gpios = <&chipcommon 12 GPIO_ACTIVE_LOW>; + }; + + /* Commit mode set by switch? */ + button-mode { + label = "Mode"; + linux,code = <KEY_SETUP>; + gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>; + }; + + /* Switch: AP mode */ + button-sw-ap { + label = "AP"; + linux,code = <BTN_0>; + gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>; + }; + + button-eject { + label = "USB eject"; + linux,code = <KEY_EJECTCD>; + gpios = <&chipcommon 15 GPIO_ACTIVE_LOW>; + }; + }; +}; + +&usb2 { + vcc-gpio = <&chipcommon 9 GPIO_ACTIVE_HIGH>; +}; + +&usb3 { + vcc-gpio = <&chipcommon 10 GPIO_ACTIVE_LOW>; +}; + +&spi_nor { + status = "okay"; +}; + +&usb3_phy { + status = "okay"; +}; diff --git a/dts/src/arm/broadcom/bcm4708-linksys-ea6300-v1.dts b/dts/src/arm/broadcom/bcm4708-linksys-ea6300-v1.dts new file mode 100644 index 0000000000..0ed25bf71f --- /dev/null +++ b/dts/src/arm/broadcom/bcm4708-linksys-ea6300-v1.dts @@ -0,0 +1,48 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Copyright (C) 2017 RafaÅ‚ MiÅ‚ecki <rafal@milecki.pl> + */ + +/dts-v1/; + +#include "bcm4708.dtsi" +#include "bcm5301x-nand-cs0-bch8.dtsi" + +/ { + compatible = "linksys,ea6300-v1", "brcm,bcm4708"; + model = "Linksys EA6300 V1"; + + chosen { + bootargs = "console=ttyS0,115200"; + }; + + memory@0 { + device_type = "memory"; + reg = <0x00000000 0x08000000>; + }; + + nvram@1c080000 { + compatible = "brcm,nvram"; + reg = <0x1c080000 0x180000>; + }; + + gpio-keys { + compatible = "gpio-keys"; + + button-wps { + label = "WPS"; + linux,code = <KEY_WPS_BUTTON>; + gpios = <&chipcommon 7 GPIO_ACTIVE_LOW>; + }; + + button-restart { + label = "Reset"; + linux,code = <KEY_RESTART>; + gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>; + }; + }; +}; + +&usb3_phy { + status = "okay"; +}; diff --git a/dts/src/arm/broadcom/bcm4708-linksys-ea6500-v2.dts b/dts/src/arm/broadcom/bcm4708-linksys-ea6500-v2.dts new file mode 100644 index 0000000000..0454423fe1 --- /dev/null +++ b/dts/src/arm/broadcom/bcm4708-linksys-ea6500-v2.dts @@ -0,0 +1,45 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Copyright (C) 2017 RafaÅ‚ MiÅ‚ecki <rafal@milecki.pl> + * Copyright (C) 2018 Rene Kjellerup <rk.katana.steel@gmail.com> + */ + +/dts-v1/; + +#include "bcm4708.dtsi" +#include "bcm5301x-nand-cs0-bch8.dtsi" + +/ { + compatible = "linksys,ea6500-v2", "brcm,bcm4708"; + model = "Linksys EA6500 V2"; + + chosen { + bootargs = "console=ttyS0,115200"; + }; + + memory@0 { + device_type = "memory"; + reg = <0x00000000 0x08000000>, + <0x88000000 0x08000000>; + }; + + gpio-keys { + compatible = "gpio-keys"; + + button-wps { + label = "WPS"; + linux,code = <KEY_WPS_BUTTON>; + gpios = <&chipcommon 7 GPIO_ACTIVE_LOW>; + }; + + button-restart { + label = "Reset"; + linux,code = <KEY_RESTART>; + gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>; + }; + }; +}; + +&usb3_phy { + status = "okay"; +}; diff --git a/dts/src/arm/broadcom/bcm4708-luxul-xap-1510.dts b/dts/src/arm/broadcom/bcm4708-luxul-xap-1510.dts new file mode 100644 index 0000000000..72e960c888 --- /dev/null +++ b/dts/src/arm/broadcom/bcm4708-luxul-xap-1510.dts @@ -0,0 +1,97 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Copyright 2016 Luxul Inc. + */ + +/dts-v1/; + +#include "bcm4708.dtsi" + +/ { + compatible = "luxul,xap-1510-v1", "brcm,bcm4708"; + model = "Luxul XAP-1510 V1"; + + chosen { + bootargs = "console=ttyS0,115200 earlycon"; + }; + + memory@0 { + device_type = "memory"; + reg = <0x00000000 0x08000000>; + }; + + nvram@1eff0000 { + compatible = "brcm,nvram"; + reg = <0x1eff0000 0x10000>; + + et0macaddr: et0macaddr { + }; + }; + + leds { + compatible = "gpio-leds"; + + led-5ghz { + label = "bcm53xx:blue:5ghz"; + gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>; + linux,default-trigger = "none"; + }; + + led-2ghz { + label = "bcm53xx:blue:2ghz"; + gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>; + linux,default-trigger = "none"; + }; + + led-status { + label = "bcm53xx:green:status"; + gpios = <&chipcommon 15 GPIO_ACTIVE_LOW>; + linux,default-trigger = "timer"; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + + button-restart { + label = "Reset"; + linux,code = <KEY_RESTART>; + gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>; + }; + }; +}; + +&gmac0 { + nvmem-cells = <&et0macaddr>; + nvmem-cell-names = "mac-address"; +}; + +&spi_nor { + status = "okay"; +}; + +&srab { + status = "okay"; + + ports { + port@0 { + label = "poe"; + }; + + port@4 { + label = "lan"; + }; + + port@5 { + label = "cpu"; + }; + + port@7 { + status = "disabled"; + }; + + port@8 { + status = "disabled"; + }; + }; +}; diff --git a/dts/src/arm/broadcom/bcm4708-luxul-xwc-1000.dts b/dts/src/arm/broadcom/bcm4708-luxul-xwc-1000.dts new file mode 100644 index 0000000000..750e174823 --- /dev/null +++ b/dts/src/arm/broadcom/bcm4708-luxul-xwc-1000.dts @@ -0,0 +1,100 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Broadcom BCM470X / BCM5301X ARM platform code. + * DTS for Luxul XWC-1000 + * + * Copyright 2014 Luxul Inc. + */ + +/dts-v1/; + +#include "bcm4708.dtsi" +#include "bcm5301x-nand-cs0-bch8.dtsi" + +/ { + compatible = "luxul,xwc-1000", "brcm,bcm4708"; + model = "Luxul XWC-1000 (BCM4708)"; + + chosen { + bootargs = "console=ttyS0,115200 earlycon"; + }; + + memory@0 { + device_type = "memory"; + reg = <0x00000000 0x08000000>; + }; + + nvram@1eff0000 { + compatible = "brcm,nvram"; + reg = <0x1eff0000 0x10000>; + + et0macaddr: et0macaddr { + }; + }; + + nand_controller: nand-controller@18028000 { + nand@0 { + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "ubi"; + reg = <0x00000000 0x08000000>; + }; + }; + }; + }; + + leds { + compatible = "gpio-leds"; + + led-status { + label = "bcm53xx:green:status"; + gpios = <&chipcommon 0 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "timer"; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + + button-restart { + label = "Reset"; + linux,code = <KEY_RESTART>; + gpios = <&chipcommon 7 GPIO_ACTIVE_LOW>; + }; + }; +}; + +&gmac0 { + nvmem-cells = <&et0macaddr>; + nvmem-cell-names = "mac-address"; +}; + +&spi_nor { + status = "okay"; +}; + +&srab { + status = "okay"; + + ports { + port@4 { + label = "lan"; + }; + + port@5 { + label = "cpu"; + }; + + port@7 { + status = "disabled"; + }; + + port@8 { + status = "disabled"; + }; + }; +}; diff --git a/dts/src/arm/broadcom/bcm4708-netgear-r6250.dts b/dts/src/arm/broadcom/bcm4708-netgear-r6250.dts new file mode 100644 index 0000000000..2bdbc7d18b --- /dev/null +++ b/dts/src/arm/broadcom/bcm4708-netgear-r6250.dts @@ -0,0 +1,134 @@ +/* + * Broadcom BCM470X / BCM5301X arm platform code. + * DTS for Netgear R6250 V1 + * + * Copyright 2013 Hauke Mehrtens <hauke@hauke-m.de> + * + * Licensed under the GNU/GPL. See COPYING for details. + */ + +/dts-v1/; + +#include "bcm4708.dtsi" +#include "bcm5301x-nand-cs0-bch8.dtsi" + +/ { + compatible = "netgear,r6250-v1", "brcm,bcm4708"; + model = "Netgear R6250 V1 (BCM4708)"; + + chosen { + bootargs = "console=ttyS0,115200 earlycon"; + }; + + memory@0 { + device_type = "memory"; + reg = <0x00000000 0x08000000>, + <0x88000000 0x08000000>; + }; + + leds { + compatible = "gpio-leds"; + + led-logo { + label = "bcm53xx:white:logo"; + gpios = <&chipcommon 1 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "default-on"; + }; + + led-power0 { + label = "bcm53xx:green:power"; + gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>; + linux,default-trigger = "default-on"; + }; + + led-power1 { + label = "bcm53xx:amber:power"; + gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>; + }; + + led-usb { + label = "bcm53xx:blue:usb"; + gpios = <&chipcommon 8 GPIO_ACTIVE_LOW>; + trigger-sources = <&ohci_port1>, <&ehci_port1>, + <&xhci_port1>; + linux,default-trigger = "usbport"; + }; + + led-wireless { + label = "bcm53xx:blue:wireless"; + gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + + button-wps { + label = "WPS"; + linux,code = <KEY_WPS_BUTTON>; + gpios = <&chipcommon 4 GPIO_ACTIVE_LOW>; + }; + + button-rfkill { + label = "WiFi"; + linux,code = <KEY_RFKILL>; + gpios = <&chipcommon 5 GPIO_ACTIVE_LOW>; + }; + + button-restart { + label = "Reset"; + linux,code = <KEY_RESTART>; + gpios = <&chipcommon 6 GPIO_ACTIVE_LOW>; + }; + }; +}; + +&usb3 { + vcc-gpio = <&chipcommon 0 GPIO_ACTIVE_HIGH>; +}; + +&spi_nor { + status = "okay"; +}; + +&usb3_phy { + status = "okay"; +}; + +&srab { + status = "okay"; + + ports { + port@0 { + label = "lan4"; + }; + + port@1 { + label = "lan3"; + }; + + port@2 { + label = "lan2"; + }; + + port@3 { + label = "lan1"; + }; + + port@4 { + label = "wan"; + }; + + port@5 { + label = "cpu"; + }; + + port@7 { + status = "disabled"; + }; + + port@8 { + status = "disabled"; + }; + }; +}; diff --git a/dts/src/arm/broadcom/bcm4708-netgear-r6300-v2.dts b/dts/src/arm/broadcom/bcm4708-netgear-r6300-v2.dts new file mode 100644 index 0000000000..77396730bd --- /dev/null +++ b/dts/src/arm/broadcom/bcm4708-netgear-r6300-v2.dts @@ -0,0 +1,88 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Broadcom BCM470X / BCM5301X ARM platform code. + * DTS for Netgear R6300 V2 + * + * Copyright (C) 2014 RafaÅ‚ MiÅ‚ecki <zajec5@gmail.com> + */ + +/dts-v1/; + +#include "bcm4708.dtsi" +#include "bcm5301x-nand-cs0-bch8.dtsi" + +/ { + compatible = "netgear,r6300-v2", "brcm,bcm4708"; + model = "Netgear R6300 V2 (BCM4708)"; + + chosen { + bootargs = "console=ttyS0,115200"; + }; + + memory@0 { + device_type = "memory"; + reg = <0x00000000 0x08000000>, + <0x88000000 0x08000000>; + }; + + leds { + compatible = "gpio-leds"; + + led-logo { + label = "bcm53xx:white:logo"; + gpios = <&chipcommon 1 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "default-on"; + }; + + led-power0 { + label = "bcm53xx:green:power"; + gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>; + }; + + led-power1 { + label = "bcm53xx:amber:power"; + gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>; + linux,default-trigger = "default-on"; + }; + + led-usb { + label = "bcm53xx:blue:usb"; + gpios = <&chipcommon 8 GPIO_ACTIVE_LOW>; + }; + + led-wireless { + label = "bcm53xx:blue:wireless"; + gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + + button-wps { + label = "WPS"; + linux,code = <KEY_WPS_BUTTON>; + gpios = <&chipcommon 4 GPIO_ACTIVE_LOW>; + }; + + button-rfkill { + label = "WiFi"; + linux,code = <KEY_RFKILL>; + gpios = <&chipcommon 5 GPIO_ACTIVE_LOW>; + }; + + button-restart { + label = "Reset"; + linux,code = <KEY_RESTART>; + gpios = <&chipcommon 6 GPIO_ACTIVE_LOW>; + }; + }; +}; + +&spi_nor { + status = "okay"; +}; + +&usb3_phy { + status = "okay"; +}; diff --git a/dts/src/arm/broadcom/bcm4708-smartrg-sr400ac.dts b/dts/src/arm/broadcom/bcm4708-smartrg-sr400ac.dts new file mode 100644 index 0000000000..b226bef336 --- /dev/null +++ b/dts/src/arm/broadcom/bcm4708-smartrg-sr400ac.dts @@ -0,0 +1,161 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Broadcom BCM470X / BCM5301X arm platform code. + * DTS for SmartRG SR400ac + * + * Copyright (C) 2015 RafaÅ‚ MiÅ‚ecki <zajec5@gmail.com> + */ + +/dts-v1/; + +#include "bcm4708.dtsi" +#include "bcm5301x-nand-cs0-bch8.dtsi" + +/ { + compatible = "smartrg,sr400ac", "brcm,bcm4708"; + model = "SmartRG SR400ac"; + + chosen { + bootargs = "console=ttyS0,115200 earlycon"; + }; + + memory@0 { + device_type = "memory"; + reg = <0x00000000 0x08000000>, + <0x88000000 0x08000000>; + }; + + leds { + compatible = "gpio-leds"; + + led-power-white { + label = "bcm53xx:white:power"; + gpios = <&chipcommon 1 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "default-on"; + }; + + led-power-amber { + label = "bcm53xx:amber:power"; + gpios = <&chipcommon 2 GPIO_ACTIVE_HIGH>; + }; + + led-usb2 { + label = "bcm53xx:white:usb2"; + gpios = <&chipcommon 3 GPIO_ACTIVE_HIGH>; + trigger-sources = <&ohci_port2>, <&ehci_port2>; + linux,default-trigger = "usbport"; + }; + + led-usb3-white { + label = "bcm53xx:white:usb3"; + gpios = <&chipcommon 4 GPIO_ACTIVE_HIGH>; + trigger-sources = <&xhci_port1>; + linux,default-trigger = "usbport"; + }; + + led-usb3-green { + label = "bcm53xx:green:usb3"; + gpios = <&chipcommon 5 GPIO_ACTIVE_HIGH>; + trigger-sources = <&ohci_port1>, <&ehci_port1>; + linux,default-trigger = "usbport"; + }; + + led-wps { + label = "bcm53xx:white:wps"; + gpios = <&chipcommon 6 GPIO_ACTIVE_HIGH>; + }; + + led-status-red { + label = "bcm53xx:red:status"; + gpios = <&chipcommon 8 GPIO_ACTIVE_HIGH>; + }; + + led-status-green { + label = "bcm53xx:green:status"; + gpios = <&chipcommon 9 GPIO_ACTIVE_HIGH>; + }; + + led-status-blue { + label = "bcm53xx:blue:status"; + gpios = <&chipcommon 10 GPIO_ACTIVE_HIGH>; + }; + + led-wan-white { + label = "bcm53xx:white:wan"; + gpios = <&chipcommon 12 GPIO_ACTIVE_HIGH>; + }; + + led-wan-red { + label = "bcm53xx:red:wan"; + gpios = <&chipcommon 13 GPIO_ACTIVE_HIGH>; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + + button-rfkill { + label = "WiFi"; + linux,code = <KEY_RFKILL>; + gpios = <&chipcommon 0 GPIO_ACTIVE_LOW>; + }; + + button-wps { + label = "WPS"; + linux,code = <KEY_WPS_BUTTON>; + gpios = <&chipcommon 7 GPIO_ACTIVE_LOW>; + }; + + button-restart { + label = "Reset"; + linux,code = <KEY_RESTART>; + gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>; + }; + }; +}; + +&spi_nor { + status = "okay"; +}; + +&srab { + status = "okay"; + + ports { + port@0 { + label = "lan4"; + }; + + port@1 { + label = "lan3"; + }; + + port@2 { + label = "lan2"; + }; + + port@3 { + label = "lan1"; + }; + + port@4 { + label = "wan"; + }; + + port@5 { + label = "cpu"; + }; + + port@7 { + status = "disabled"; + }; + + port@8 { + status = "disabled"; + }; + }; +}; + +&usb3_phy { + status = "okay"; +}; diff --git a/dts/src/arm/broadcom/bcm4708.dtsi b/dts/src/arm/broadcom/bcm4708.dtsi new file mode 100644 index 0000000000..1a19e97a98 --- /dev/null +++ b/dts/src/arm/broadcom/bcm4708.dtsi @@ -0,0 +1,48 @@ +/* + * Broadcom BCM470X / BCM5301X ARM platform code. + * DTS for BCM4708 SoC. + * + * Copyright 2013-2014 Hauke Mehrtens <hauke@hauke-m.de> + * + * Licensed under the GNU/GPL. See COPYING for details. + */ + +#include "bcm5301x.dtsi" + +/ { + compatible = "brcm,bcm4708"; + + aliases { + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + enable-method = "brcm,bcm-nsp-smp"; + + cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a9"; + next-level-cache = <&L2>; + reg = <0x0>; + }; + + cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a9"; + next-level-cache = <&L2>; + secondary-boot-reg = <0xffff0400>; + reg = <0x1>; + }; + }; + +}; + +&uart0 { + status = "okay"; +}; diff --git a/dts/src/arm/broadcom/bcm47081-asus-rt-n18u.dts b/dts/src/arm/broadcom/bcm47081-asus-rt-n18u.dts new file mode 100644 index 0000000000..3854db0118 --- /dev/null +++ b/dts/src/arm/broadcom/bcm47081-asus-rt-n18u.dts @@ -0,0 +1,79 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Broadcom BCM470X / BCM5301X ARM platform code. + * DTS for Asus RT-N18U + * + * Copyright (C) 2014 RafaÅ‚ MiÅ‚ecki <zajec5@gmail.com> + */ + +/dts-v1/; + +#include "bcm47081.dtsi" +#include "bcm5301x-nand-cs0-bch8.dtsi" + +/ { + compatible = "asus,rt-n18u", "brcm,bcm47081", "brcm,bcm4708"; + model = "Asus RT-N18U (BCM47081)"; + + chosen { + bootargs = "console=ttyS0,115200"; + }; + + memory@0 { + device_type = "memory"; + reg = <0x00000000 0x08000000>, + <0x88000000 0x08000000>; + }; + + leds { + compatible = "gpio-leds"; + + led-power { + label = "bcm53xx:blue:power"; + gpios = <&chipcommon 0 GPIO_ACTIVE_LOW>; + linux,default-trigger = "default-on"; + }; + + led-usb2 { + label = "bcm53xx:blue:usb2"; + gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>; + }; + + led-wan { + label = "bcm53xx:blue:wan"; + gpios = <&chipcommon 6 GPIO_ACTIVE_LOW>; + linux,default-trigger = "default-on"; + }; + + led-lan { + label = "bcm53xx:blue:lan"; + gpios = <&chipcommon 9 GPIO_ACTIVE_LOW>; + linux,default-trigger = "default-on"; + }; + + led-usb3 { + label = "bcm53xx:blue:usb3"; + gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + + button-restart { + label = "Reset"; + linux,code = <KEY_RESTART>; + gpios = <&chipcommon 7 GPIO_ACTIVE_LOW>; + }; + + button-wps { + label = "WPS"; + linux,code = <KEY_WPS_BUTTON>; + gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>; + }; + }; +}; + +&usb3_phy { + status = "okay"; +}; diff --git a/dts/src/arm/broadcom/bcm47081-buffalo-wzr-600dhp2.dts b/dts/src/arm/broadcom/bcm47081-buffalo-wzr-600dhp2.dts new file mode 100644 index 0000000000..192b8db5a8 --- /dev/null +++ b/dts/src/arm/broadcom/bcm47081-buffalo-wzr-600dhp2.dts @@ -0,0 +1,157 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Broadcom BCM470X / BCM5301X ARM platform code. + * DTS for Buffalo WZR-600DHP2 + * + * Copyright (C) 2014 RafaÅ‚ MiÅ‚ecki <zajec5@gmail.com> + */ + +/dts-v1/; + +#include "bcm47081.dtsi" +#include "bcm5301x-nand-cs0-bch8.dtsi" + +/ { + compatible = "buffalo,wzr-600dhp2", "brcm,bcm47081", "brcm,bcm4708"; + model = "Buffalo WZR-600DHP2 (BCM47081)"; + + chosen { + bootargs = "console=ttyS0,115200 earlycon"; + }; + + memory@0 { + device_type = "memory"; + reg = <0x00000000 0x08000000>, + <0x88000000 0x08000000>; + }; + + spi { + compatible = "spi-gpio"; + num-chipselects = <1>; + sck-gpios = <&chipcommon 7 0>; + mosi-gpios = <&chipcommon 4 0>; + cs-gpios = <&chipcommon 6 0>; + #address-cells = <1>; + #size-cells = <0>; + + hc595: gpio_spi@0 { + compatible = "fairchild,74hc595"; + reg = <0>; + registers-number = <1>; + spi-max-frequency = <100000>; + + gpio-controller; + #gpio-cells = <2>; + + }; + }; + + leds { + compatible = "gpio-leds"; + + led-power0 { + label = "bcm53xx:green:power"; + gpios = <&hc595 1 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "default-on"; + }; + + led-power1 { + label = "bcm53xx:red:power"; + gpios = <&hc595 2 GPIO_ACTIVE_HIGH>; + }; + + led-router0 { + label = "bcm53xx:green:router"; + gpios = <&hc595 3 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "default-on"; + }; + + led-router1 { + label = "bcm53xx:amber:router"; + gpios = <&hc595 4 GPIO_ACTIVE_HIGH>; + }; + + led-wan { + label = "bcm53xx:green:wan"; + gpios = <&hc595 5 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "default-on"; + }; + + led-wireless0 { + label = "bcm53xx:green:wireless"; + gpios = <&hc595 6 GPIO_ACTIVE_HIGH>; + }; + + led-wireless1 { + label = "bcm53xx:amber:wireless"; + gpios = <&hc595 7 GPIO_ACTIVE_HIGH>; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + + button-aoss { + label = "AOSS"; + linux,code = <KEY_WPS_BUTTON>; + gpios = <&chipcommon 9 GPIO_ACTIVE_LOW>; + }; + + button-restart { + label = "Reset"; + linux,code = <KEY_RESTART>; + gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>; + }; + + /* Switch device mode? */ + button-mode { + label = "Mode"; + linux,code = <KEY_SETUP>; + gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>; + }; + + button-eject { + label = "USB eject"; + linux,code = <KEY_EJECTCD>; + gpios = <&chipcommon 15 GPIO_ACTIVE_LOW>; + }; + }; +}; + +&srab { + status = "okay"; + + ports { + port@0 { + label = "lan1"; + }; + + port@1 { + label = "lan2"; + }; + + port@2 { + label = "lan3"; + }; + + port@3 { + label = "lan4"; + }; + + port@4 { + label = "wan"; + }; + + port@5 { + label = "cpu"; + }; + + port@7 { + status = "disabled"; + }; + + port@8 { + status = "disabled"; + }; + }; +}; diff --git a/dts/src/arm/broadcom/bcm47081-buffalo-wzr-900dhp.dts b/dts/src/arm/broadcom/bcm47081-buffalo-wzr-900dhp.dts new file mode 100644 index 0000000000..7655e4ff2d --- /dev/null +++ b/dts/src/arm/broadcom/bcm47081-buffalo-wzr-900dhp.dts @@ -0,0 +1,109 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Broadcom BCM470X / BCM5301X ARM platform code. + * DTS for Buffalo WZR-900DHP + * + * Copyright (C) 2015 RafaÅ‚ MiÅ‚ecki <zajec5@gmail.com> + */ + +/dts-v1/; + +#include "bcm47081.dtsi" +#include "bcm5301x-nand-cs0-bch8.dtsi" + +/ { + compatible = "buffalo,wzr-900dhp", "brcm,bcm47081", "brcm,bcm4708"; + model = "Buffalo WZR-900DHP (BCM47081)"; + + chosen { + bootargs = "console=ttyS0,115200"; + }; + + memory@0 { + device_type = "memory"; + reg = <0x00000000 0x08000000>, + <0x88000000 0x08000000>; + }; + + spi { + compatible = "spi-gpio"; + num-chipselects = <1>; + sck-gpios = <&chipcommon 7 0>; + mosi-gpios = <&chipcommon 4 0>; + cs-gpios = <&chipcommon 6 0>; + #address-cells = <1>; + #size-cells = <0>; + + hc595: gpio_spi@0 { + compatible = "fairchild,74hc595"; + reg = <0>; + registers-number = <1>; + spi-max-frequency = <100000>; + + gpio-controller; + #gpio-cells = <2>; + + }; + }; + + leds { + compatible = "gpio-leds"; + + led-usb { + label = "bcm53xx:green:usb"; + gpios = <&hc595 0 GPIO_ACTIVE_HIGH>; + }; + + led-power0 { + label = "bcm53xx:green:power"; + gpios = <&hc595 1 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "default-on"; + }; + + led-power1 { + label = "bcm53xx:red:power"; + gpios = <&hc595 2 GPIO_ACTIVE_HIGH>; + }; + + led-router0 { + label = "bcm53xx:green:router"; + gpios = <&hc595 3 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "default-on"; + }; + + led-router1 { + label = "bcm53xx:amber:router"; + gpios = <&hc595 4 GPIO_ACTIVE_HIGH>; + }; + + led-wan { + label = "bcm53xx:green:wan"; + gpios = <&hc595 5 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "default-on"; + }; + + led-wireless0 { + label = "bcm53xx:green:wireless"; + gpios = <&hc595 6 GPIO_ACTIVE_HIGH>; + }; + + led-wireless1 { + label = "bcm53xx:amber:wireless"; + gpios = <&hc595 7 GPIO_ACTIVE_HIGH>; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + + button-restart { + label = "Reset"; + linux,code = <KEY_RESTART>; + gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>; + }; + }; +}; + +&usb3_phy { + status = "okay"; +}; diff --git a/dts/src/arm/broadcom/bcm47081-luxul-xap-1410.dts b/dts/src/arm/broadcom/bcm47081-luxul-xap-1410.dts new file mode 100644 index 0000000000..0198b5f9e4 --- /dev/null +++ b/dts/src/arm/broadcom/bcm47081-luxul-xap-1410.dts @@ -0,0 +1,93 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Copyright 2017 Luxul Inc. + */ + +/dts-v1/; + +#include "bcm47081.dtsi" + +/ { + compatible = "luxul,xap-1410-v1", "brcm,bcm47081", "brcm,bcm4708"; + model = "Luxul XAP-1410 V1"; + + chosen { + bootargs = "console=ttyS0,115200"; + }; + + memory@0 { + device_type = "memory"; + reg = <0x00000000 0x08000000>; + }; + + nvram@1eff0000 { + compatible = "brcm,nvram"; + reg = <0x1eff0000 0x10000>; + + et0macaddr: et0macaddr { + }; + }; + + leds { + compatible = "gpio-leds"; + + led-5ghz { + label = "bcm53xx:blue:5ghz"; + gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>; + linux,default-trigger = "none"; + }; + + led-2ghz { + label = "bcm53xx:blue:2ghz"; + gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>; + linux,default-trigger = "none"; + }; + + led-status { + label = "bcm53xx:green:status"; + gpios = <&chipcommon 15 GPIO_ACTIVE_LOW>; + linux,default-trigger = "timer"; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + + button-restart { + label = "Reset"; + linux,code = <KEY_RESTART>; + gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>; + }; + }; +}; + +&gmac0 { + nvmem-cells = <&et0macaddr>; + nvmem-cell-names = "mac-address"; +}; + +&spi_nor { + status = "okay"; +}; + +&srab { + status = "okay"; + + ports { + port@4 { + label = "poe"; + }; + + port@5 { + label = "cpu"; + }; + + port@7 { + status = "disabled"; + }; + + port@8 { + status = "disabled"; + }; + }; +}; diff --git a/dts/src/arm/broadcom/bcm47081-luxul-xwr-1200.dts b/dts/src/arm/broadcom/bcm47081-luxul-xwr-1200.dts new file mode 100644 index 0000000000..73ff1694a4 --- /dev/null +++ b/dts/src/arm/broadcom/bcm47081-luxul-xwr-1200.dts @@ -0,0 +1,160 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Copyright 2017 Luxul Inc. + */ + +/dts-v1/; + +#include "bcm47081.dtsi" +#include "bcm5301x-nand-cs0-bch4.dtsi" + +/ { + compatible = "luxul,xwr-1200-v1", "brcm,bcm47081", "brcm,bcm4708"; + model = "Luxul XWR-1200 V1"; + + chosen { + bootargs = "console=ttyS0,115200"; + }; + + memory@0 { + device_type = "memory"; + reg = <0x00000000 0x08000000>; + }; + + nvram@1eff0000 { + compatible = "brcm,nvram"; + reg = <0x1eff0000 0x10000>; + + et0macaddr: et0macaddr { + #nvmem-cell-cells = <1>; + }; + }; + + leds { + compatible = "gpio-leds"; + + led-power { + label = "bcm53xx:green:power"; + gpios = <&chipcommon 0 GPIO_ACTIVE_LOW>; + linux,default-trigger = "default-on"; + }; + + led-lan3 { + label = "bcm53xx:green:lan3"; + gpios = <&chipcommon 1 GPIO_ACTIVE_LOW>; + linux,default-trigger = "none"; + }; + + led-lan4 { + label = "bcm53xx:green:lan4"; + gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>; + linux,default-trigger = "none"; + }; + + led-wan { + label = "bcm53xx:green:wan"; + gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>; + linux,default-trigger = "none"; + }; + + led-lan2 { + label = "bcm53xx:green:lan2"; + gpios = <&chipcommon 6 GPIO_ACTIVE_LOW>; + linux,default-trigger = "none"; + }; + + led-usb { + label = "bcm53xx:green:usb"; + gpios = <&chipcommon 8 GPIO_ACTIVE_LOW>; + trigger-sources = <&ohci_port2>, <&ehci_port2>; + linux,default-trigger = "usbport"; + }; + + led-status { + label = "bcm53xx:green:status"; + gpios = <&chipcommon 10 GPIO_ACTIVE_LOW>; + linux,default-trigger = "timer"; + }; + + led-2ghz { + label = "bcm53xx:green:2ghz"; + gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>; + linux,default-trigger = "none"; + }; + + led-5ghz { + label = "bcm53xx:green:5ghz"; + gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>; + linux,default-trigger = "none"; + }; + + led-lan1 { + label = "bcm53xx:green:lan1"; + gpios = <&chipcommon 15 GPIO_ACTIVE_LOW>; + linux,default-trigger = "none"; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + + button-restart { + label = "Reset"; + linux,code = <KEY_RESTART>; + gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>; + }; + }; +}; + +&usb2 { + vcc-gpio = <&chipcommon 9 GPIO_ACTIVE_HIGH>; +}; + +&gmac0 { + nvmem-cells = <&et0macaddr 0>; + nvmem-cell-names = "mac-address"; +}; + +&spi_nor { + status = "okay"; +}; + +&srab { + status = "okay"; + + ports { + port@0 { + label = "lan4"; + }; + + port@1 { + label = "lan3"; + }; + + port@2 { + label = "lan2"; + }; + + port@3 { + label = "lan1"; + }; + + port@4 { + label = "wan"; + nvmem-cells = <&et0macaddr 5>; + nvmem-cell-names = "mac-address"; + }; + + port@5 { + label = "cpu"; + }; + + port@7 { + status = "disabled"; + }; + + port@8 { + status = "disabled"; + }; + }; +}; diff --git a/dts/src/arm/broadcom/bcm47081-tplink-archer-c5-v2.dts b/dts/src/arm/broadcom/bcm47081-tplink-archer-c5-v2.dts new file mode 100644 index 0000000000..b6a5886698 --- /dev/null +++ b/dts/src/arm/broadcom/bcm47081-tplink-archer-c5-v2.dts @@ -0,0 +1,113 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Copyright (C) 2017 RafaÅ‚ MiÅ‚ecki <rafal@milecki.pl> + */ + +/dts-v1/; + +#include "bcm47081.dtsi" + +/ { + compatible = "tplink,archer-c5-v2", "brcm,bcm47081", "brcm,bcm4708"; + model = "TP-LINK Archer C5 V2"; + + chosen { + bootargs = "earlycon"; + }; + + memory@0 { + device_type = "memory"; + reg = <0x00000000 0x08000000>; + }; + + leds { + compatible = "gpio-leds"; + + led-2ghz { + label = "bcm53xx:green:2ghz"; + gpios = <&chipcommon 0 GPIO_ACTIVE_HIGH>; + }; + + led-lan { + label = "bcm53xx:green:lan"; + gpios = <&chipcommon 1 GPIO_ACTIVE_HIGH>; + }; + + led-usb2-port1 { + label = "bcm53xx:green:usb2-port1"; + gpios = <&chipcommon 2 GPIO_ACTIVE_HIGH>; + trigger-sources = <&ohci_port1>, <&ehci_port1>; + linux,default-trigger = "usbport"; + }; + + led-power { + label = "bcm53xx:green:power"; + gpios = <&chipcommon 4 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "default-on"; + }; + + led-wan-green { + label = "bcm53xx:green:wan"; + gpios = <&chipcommon 5 GPIO_ACTIVE_HIGH>; + }; + + led-wps { + label = "bcm53xx:green:wps"; + gpios = <&chipcommon 6 GPIO_ACTIVE_HIGH>; + }; + + led-wan-amber { + label = "bcm53xx:amber:wan"; + gpios = <&chipcommon 8 GPIO_ACTIVE_HIGH>; + }; + + led-5ghz { + label = "bcm53xx:green:5ghz"; + gpios = <&chipcommon 12 GPIO_ACTIVE_HIGH>; + }; + + led-usb2-port2 { + label = "bcm53xx:green:usb2-port2"; + gpios = <&chipcommon 13 GPIO_ACTIVE_HIGH>; + trigger-sources = <&ohci_port2>, <&ehci_port2>; + linux,default-trigger = "usbport"; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + + button-rfkill { + label = "WiFi"; + linux,code = <KEY_RFKILL>; + gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>; + }; + + button-restart { + label = "Reset"; + linux,code = <KEY_RESTART>; + gpios = <&chipcommon 7 GPIO_ACTIVE_LOW>; + }; + }; +}; + +&spi_nor { + status = "okay"; + + partitions { + compatible = "tplink,safeloader-partitions"; + partitions-table-offset = <0xe50000>; + + partition-os-image { + compatible = "brcm,trx"; + }; + + partition-file-system { + linux,rootfs; + }; + }; +}; + +&usb2 { + vcc-gpio = <&chipcommon 9 GPIO_ACTIVE_HIGH>; +}; diff --git a/dts/src/arm/broadcom/bcm47081.dtsi b/dts/src/arm/broadcom/bcm47081.dtsi new file mode 100644 index 0000000000..ed13af0285 --- /dev/null +++ b/dts/src/arm/broadcom/bcm47081.dtsi @@ -0,0 +1,37 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Broadcom BCM470X / BCM5301X ARM platform code. + * DTS for BCM47081 SoC. + * + * Copyright © 2014 RafaÅ‚ MiÅ‚ecki <zajec5@gmail.com> + */ + +#include "bcm5301x.dtsi" + +/ { + compatible = "brcm,bcm47081"; + + aliases { + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a9"; + next-level-cache = <&L2>; + reg = <0x0>; + }; + }; +}; + +&uart0 { + status = "okay"; +}; diff --git a/dts/src/arm/broadcom/bcm4709-asus-rt-ac87u.dts b/dts/src/arm/broadcom/bcm4709-asus-rt-ac87u.dts new file mode 100644 index 0000000000..59400217f8 --- /dev/null +++ b/dts/src/arm/broadcom/bcm4709-asus-rt-ac87u.dts @@ -0,0 +1,109 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Broadcom BCM470X / BCM5301X ARM platform code. + * DTS for Asus RT-AC87U + * + * Copyright (C) 2015 RafaÅ‚ MiÅ‚ecki <zajec5@gmail.com> + */ + +/dts-v1/; + +#include "bcm4709.dtsi" +#include "bcm5301x-nand-cs0-bch8.dtsi" + +/ { + compatible = "asus,rt-ac87u", "brcm,bcm4709", "brcm,bcm4708"; + model = "Asus RT-AC87U"; + + chosen { + bootargs = "console=ttyS0,115200"; + }; + + memory@0 { + device_type = "memory"; + reg = <0x00000000 0x08000000>, + <0x88000000 0x08000000>; + }; + + nvram@1c080000 { + et1macaddr: et1macaddr { + #nvmem-cell-cells = <1>; + }; + }; + + leds { + compatible = "gpio-leds"; + + led-wps { + label = "bcm53xx:blue:wps"; + gpios = <&chipcommon 1 GPIO_ACTIVE_LOW>; + }; + + led-power { + label = "bcm53xx:blue:power"; + gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>; + linux,default-trigger = "default-on"; + }; + + led-wan { + label = "bcm53xx:red:wan"; + gpios = <&chipcommon 5 GPIO_ACTIVE_LOW>; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + + button-wps { + label = "WPS"; + linux,code = <KEY_WPS_BUTTON>; + gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>; + }; + + button-restart { + label = "Reset"; + linux,code = <KEY_RESTART>; + gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>; + }; + }; +}; + +&gmac0 { + nvmem-cells = <&et1macaddr 0>; + nvmem-cell-names = "mac-address"; +}; + +&usb3_phy { + status = "okay"; +}; + +&nandcs { + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + boot@0 { + label = "boot"; + reg = <0x00000000 0x00080000>; + read-only; + }; + + nvram@80000 { + label = "nvram"; + reg = <0x00080000 0x00180000>; + }; + + firmware@200000 { + label = "firmware"; + reg = <0x00200000 0x07cc0000>; + compatible = "brcm,trx"; + }; + + asus@7ec0000 { + label = "asus"; + reg = <0x07ec0000 0x00140000>; + read-only; + }; + }; +}; diff --git a/dts/src/arm/broadcom/bcm4709-buffalo-wxr-1900dhp.dts b/dts/src/arm/broadcom/bcm4709-buffalo-wxr-1900dhp.dts new file mode 100644 index 0000000000..b7cd2faa30 --- /dev/null +++ b/dts/src/arm/broadcom/bcm4709-buffalo-wxr-1900dhp.dts @@ -0,0 +1,132 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Broadcom BCM470X / BCM5301X ARM platform code. + * DTS for Buffalo WXR-1900DHP + * + * Copyright (C) 2015 Felix Fietkau <nbd@openwrt.org> + */ + +/dts-v1/; + +#include "bcm4709.dtsi" +#include "bcm5301x-nand-cs0-bch8.dtsi" + +/ { + compatible = "buffalo,wxr-1900dhp", "brcm,bcm4709", "brcm,bcm4708"; + model = "Buffalo WXR-1900DHP"; + + chosen { + bootargs = "console=ttyS0,115200"; + }; + + memory@0 { + device_type = "memory"; + reg = <0x00000000 0x08000000>, + <0x88000000 0x18000000>; + }; + + leds { + compatible = "gpio-leds"; + + led-usb { + label = "bcm53xx:green:usb"; + gpios = <&chipcommon 4 GPIO_ACTIVE_HIGH>; + }; + + led-power-amber { + label = "bcm53xx:amber:power"; + gpios = <&chipcommon 5 GPIO_ACTIVE_HIGH>; + }; + + led-power-white { + label = "bcm53xx:white:power"; + gpios = <&chipcommon 6 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "default-on"; + }; + + led-router-amber { + label = "bcm53xx:amber:router"; + gpios = <&chipcommon 7 GPIO_ACTIVE_HIGH>; + }; + + led-router-white { + label = "bcm53xx:white:router"; + gpios = <&chipcommon 8 GPIO_ACTIVE_HIGH>; + }; + + led-wan-amber { + label = "bcm53xx:amber:wan"; + gpios = <&chipcommon 9 GPIO_ACTIVE_HIGH>; + }; + + led-wan-white { + label = "bcm53xx:white:wan"; + gpios = <&chipcommon 10 GPIO_ACTIVE_HIGH>; + }; + + led-wireless-amber { + label = "bcm53xx:amber:wireless"; + gpios = <&chipcommon 11 GPIO_ACTIVE_HIGH>; + }; + + led-wireless-white { + label = "bcm53xx:white:wireless"; + gpios = <&chipcommon 12 GPIO_ACTIVE_HIGH>; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + + button-power { + label = "Power"; + linux,code = <KEY_POWER>; + gpios = <&chipcommon 1 GPIO_ACTIVE_LOW>; + }; + + button-restart { + label = "Reset"; + linux,code = <KEY_RESTART>; + gpios = <&chipcommon 15 GPIO_ACTIVE_LOW>; + }; + + button-aoss { + label = "AOSS"; + linux,code = <KEY_WPS_BUTTON>; + gpios = <&chipcommon 16 GPIO_ACTIVE_LOW>; + }; + + /* Commit mode set by switch? */ + button-mode { + label = "Mode"; + linux,code = <KEY_SETUP>; + gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>; + }; + + /* Switch: AP mode */ + button-sw-ap { + label = "AP"; + linux,code = <BTN_0>; + gpios = <&chipcommon 18 GPIO_ACTIVE_LOW>; + }; + + button-eject { + label = "USB eject"; + linux,code = <KEY_EJECTCD>; + gpios = <&chipcommon 20 GPIO_ACTIVE_LOW>; + }; + }; +}; + + +&usb2 { + vcc-gpio = <&chipcommon 13 GPIO_ACTIVE_HIGH>; +}; + +&spi_nor { + status = "okay"; +}; + +&usb3_phy { + status = "okay"; +}; diff --git a/dts/src/arm/broadcom/bcm4709-linksys-ea9200.dts b/dts/src/arm/broadcom/bcm4709-linksys-ea9200.dts new file mode 100644 index 0000000000..2ba5adf2b7 --- /dev/null +++ b/dts/src/arm/broadcom/bcm4709-linksys-ea9200.dts @@ -0,0 +1,87 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Copyright (C) 2017 RafaÅ‚ MiÅ‚ecki <rafal@milecki.pl> + */ + +/dts-v1/; + +#include "bcm4709.dtsi" +#include "bcm5301x-nand-cs0-bch8.dtsi" + +/ { + compatible = "linksys,ea9200", "brcm,bcm4709", "brcm,bcm4708"; + model = "Linksys EA9200"; + + chosen { + bootargs = "console=ttyS0,115200"; + }; + + memory@0 { + device_type = "memory"; + reg = <0x00000000 0x08000000>, + <0x88000000 0x08000000>; + }; + + nvram@1c080000 { + compatible = "brcm,nvram"; + reg = <0x1c080000 0x180000>; + }; + + gpio-keys { + compatible = "gpio-keys"; + + button-wps { + label = "WPS"; + linux,code = <KEY_WPS_BUTTON>; + gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>; + }; + + button-restart { + label = "Reset"; + linux,code = <KEY_RESTART>; + gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>; + }; + }; +}; + +&usb3_phy { + status = "okay"; +}; + +&srab { + status = "okay"; + + ports { + port@0 { + label = "lan1"; + }; + + port@1 { + label = "lan2"; + }; + + port@2 { + label = "lan3"; + }; + + port@3 { + label = "lan4"; + }; + + port@4 { + label = "wan"; + }; + + port@5 { + status = "disabled"; + }; + + port@7 { + status = "disabled"; + }; + + port@8 { + label = "cpu"; + }; + }; +}; diff --git a/dts/src/arm/broadcom/bcm4709-netgear-r7000.dts b/dts/src/arm/broadcom/bcm4709-netgear-r7000.dts new file mode 100644 index 0000000000..24ba8f8f9b --- /dev/null +++ b/dts/src/arm/broadcom/bcm4709-netgear-r7000.dts @@ -0,0 +1,106 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Broadcom BCM470X / BCM5301X ARM platform code. + * DTS for Netgear R7000 + * + * Copyright (C) 2015 RafaÅ‚ MiÅ‚ecki <zajec5@gmail.com> + */ + +/dts-v1/; + +#include "bcm4709.dtsi" +#include "bcm5301x-nand-cs0-bch8.dtsi" + +/ { + compatible = "netgear,r7000", "brcm,bcm4709", "brcm,bcm4708"; + model = "Netgear R7000"; + + chosen { + bootargs = "console=ttyS0,115200"; + }; + + memory@0 { + device_type = "memory"; + reg = <0x00000000 0x08000000>, + <0x88000000 0x08000000>; + }; + + leds { + compatible = "gpio-leds"; + + led-power-white { + label = "bcm53xx:white:power"; + gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>; + linux,default-trigger = "default-on"; + }; + + led-power-amber { + label = "bcm53xx:amber:power"; + gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>; + }; + + led-5ghz { + label = "bcm53xx:white:5ghz"; + gpios = <&chipcommon 12 GPIO_ACTIVE_LOW>; + }; + + led-2ghz { + label = "bcm53xx:white:2ghz"; + gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>; + }; + + led-wps { + label = "bcm53xx:white:wps"; + gpios = <&chipcommon 14 GPIO_ACTIVE_HIGH>; + }; + + led-wireless { + label = "bcm53xx:white:wireless"; + gpios = <&chipcommon 15 GPIO_ACTIVE_HIGH>; + }; + + led-usb3 { + label = "bcm53xx:white:usb3"; + gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>; + }; + + led-usb2 { + label = "bcm53xx:white:usb2"; + gpios = <&chipcommon 18 GPIO_ACTIVE_LOW>; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + + button-wps { + label = "WPS"; + linux,code = <KEY_WPS_BUTTON>; + gpios = <&chipcommon 4 GPIO_ACTIVE_LOW>; + }; + + button-rfkill { + label = "WiFi"; + linux,code = <KEY_RFKILL>; + gpios = <&chipcommon 5 GPIO_ACTIVE_LOW>; + }; + + button-restart { + label = "Reset"; + linux,code = <KEY_RESTART>; + gpios = <&chipcommon 6 GPIO_ACTIVE_LOW>; + }; + }; +}; + +&usb2 { + vcc-gpio = <&chipcommon 0 GPIO_ACTIVE_HIGH>; +}; + +&usb3 { + vcc-gpio = <&chipcommon 0 GPIO_ACTIVE_HIGH>; +}; + +&usb3_phy { + status = "okay"; +}; diff --git a/dts/src/arm/broadcom/bcm4709-netgear-r8000.dts b/dts/src/arm/broadcom/bcm4709-netgear-r8000.dts new file mode 100644 index 0000000000..127ca87412 --- /dev/null +++ b/dts/src/arm/broadcom/bcm4709-netgear-r8000.dts @@ -0,0 +1,252 @@ +/* + * Broadcom BCM470X / BCM5301X ARM platform code. + * DTS for Netgear R8000 + * + * Copyright (C) 2015 RafaÅ‚ MiÅ‚ecki <zajec5@gmail.com> + * + * Permission to use, copy, modify, and/or distribute this software for any + * purpose with or without fee is hereby granted, provided that the above + * copyright notice and this permission notice appear in all copies. + * + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES WITH + * REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY + * AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY SPECIAL, DIRECT, + * INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM + * LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE + * OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR + * PERFORMANCE OF THIS SOFTWARE. + */ + +/dts-v1/; + +#include "bcm4709.dtsi" +#include "bcm5301x-nand-cs0-bch8.dtsi" + +/ { + compatible = "netgear,r8000", "brcm,bcm4709", "brcm,bcm4708"; + model = "Netgear R8000 (BCM4709)"; + + chosen { + bootargs = "console=ttyS0,115200"; + }; + + memory@0 { + device_type = "memory"; + reg = <0x00000000 0x08000000>, + <0x88000000 0x08000000>; + }; + + leds { + compatible = "gpio-leds"; + + led-power-white { + label = "bcm53xx:white:power"; + gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>; + linux,default-trigger = "default-on"; + }; + + led-power-amber { + label = "bcm53xx:amber:power"; + gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>; + }; + + led-wan-white { + label = "bcm53xx:white:wan"; + gpios = <&chipcommon 8 GPIO_ACTIVE_LOW>; + linux,default-trigger = "default-on"; + }; + + led-wan-amber { + label = "bcm53xx:amber:wan"; + gpios = <&chipcommon 9 GPIO_ACTIVE_HIGH>; + }; + + led-5ghz-1 { + label = "bcm53xx:white:5ghz-1"; + gpios = <&chipcommon 12 GPIO_ACTIVE_LOW>; + }; + + led-2ghz { + label = "bcm53xx:white:2ghz"; + gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>; + }; + + led-wireless { + label = "bcm53xx:white:wireless"; + gpios = <&chipcommon 14 GPIO_ACTIVE_HIGH>; + }; + + led-wps { + label = "bcm53xx:white:wps"; + gpios = <&chipcommon 15 GPIO_ACTIVE_HIGH>; + }; + + led-5ghz-2 { + label = "bcm53xx:white:5ghz-2"; + gpios = <&chipcommon 16 GPIO_ACTIVE_LOW>; + }; + + led-usb3 { + label = "bcm53xx:white:usb3"; + gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>; + }; + + led-usb2 { + label = "bcm53xx:white:usb2"; + gpios = <&chipcommon 18 GPIO_ACTIVE_LOW>; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + + button-rfkill { + label = "WiFi"; + linux,code = <KEY_RFKILL>; + gpios = <&chipcommon 4 GPIO_ACTIVE_LOW>; + }; + + button-wps { + label = "WPS"; + linux,code = <KEY_WPS_BUTTON>; + gpios = <&chipcommon 5 GPIO_ACTIVE_LOW>; + }; + + button-restart { + label = "Reset"; + linux,code = <KEY_RESTART>; + gpios = <&chipcommon 6 GPIO_ACTIVE_LOW>; + }; + + button-brightness { + label = "Backlight"; + linux,code = <KEY_BRIGHTNESS_ZERO>; + gpios = <&chipcommon 19 GPIO_ACTIVE_LOW>; + }; + }; +}; + +&pcie0 { + #address-cells = <3>; + #size-cells = <2>; + + bridge@0,0,0 { + reg = <0x0000 0 0 0 0>; + + #address-cells = <3>; + #size-cells = <2>; + + wifi@0,1,0 { + compatible = "brcm,bcm4366-fmac", "brcm,bcm4329-fmac"; + reg = <0x0000 0 0 0 0>; + ieee80211-freq-limit = <5735000 5835000>; + brcm,ccode-map = "JP-JP-78", "US-Q2-86"; + }; + }; +}; + +&pcie1 { + #address-cells = <3>; + #size-cells = <2>; + + bridge@1,0,0 { + reg = <0x0000 0 0 0 0>; + + #address-cells = <3>; + #size-cells = <2>; + + bridge@1,1,0 { + reg = <0x0000 0 0 0 0>; + + #address-cells = <3>; + #size-cells = <2>; + + bridge@1,0 { + reg = <0x800 0 0 0 0>; + + #address-cells = <3>; + #size-cells = <2>; + + wifi@0,0 { + compatible = "brcm,bcm4366-fmac", "brcm,bcm4329-fmac"; + reg = <0x0000 0 0 0 0>; + brcm,ccode-map = "JP-JP-78", "US-Q2-86"; + }; + }; + + bridge@1,2,2 { + reg = <0x1000 0 0 0 0>; + + #address-cells = <3>; + #size-cells = <2>; + + wifi@1,4,0 { + compatible = "brcm,bcm4366-fmac", "brcm,bcm4329-fmac"; + reg = <0x0000 0 0 0 0>; + ieee80211-freq-limit = <5170000 5730000>; + brcm,ccode-map = "JP-JP-78", "US-Q2-86"; + }; + }; + }; + }; +}; + +&usb2 { + vcc-gpio = <&chipcommon 0 GPIO_ACTIVE_HIGH>; +}; + +&usb3 { + vcc-gpio = <&chipcommon 0 GPIO_ACTIVE_HIGH>; +}; + +&usb3_phy { + status = "okay"; +}; + +&srab { + status = "okay"; + + ports { + port@0 { + label = "lan1"; + }; + + port@1 { + label = "lan2"; + }; + + port@2 { + label = "lan3"; + }; + + port@3 { + label = "lan4"; + }; + + port@4 { + label = "wan"; + }; + + port@5 { + status = "disabled"; + + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + + port@7 { + status = "disabled"; + + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + + port@8 { + label = "cpu"; + }; + }; +}; diff --git a/dts/src/arm/broadcom/bcm4709-tplink-archer-c9-v1.dts b/dts/src/arm/broadcom/bcm4709-tplink-archer-c9-v1.dts new file mode 100644 index 0000000000..5a8b2b1567 --- /dev/null +++ b/dts/src/arm/broadcom/bcm4709-tplink-archer-c9-v1.dts @@ -0,0 +1,122 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Copyright (C) 2016 RafaÅ‚ MiÅ‚ecki <rafal@milecki.pl> + */ + +/dts-v1/; + +#include "bcm4709.dtsi" + +/ { + compatible = "tplink,archer-c9-v1", "brcm,bcm4709", "brcm,bcm4708"; + model = "TP-LINK Archer C9 V1"; + + chosen { + bootargs = "console=ttyS0,115200 earlycon"; + }; + + memory@0 { + device_type = "memory"; + reg = <0x00000000 0x08000000>; + }; + + leds { + compatible = "gpio-leds"; + + led-lan { + label = "bcm53xx:blue:lan"; + gpios = <&chipcommon 1 GPIO_ACTIVE_HIGH>; + }; + + led-wps { + label = "bcm53xx:blue:wps"; + gpios = <&chipcommon 2 GPIO_ACTIVE_HIGH>; + }; + + led-2ghz { + label = "bcm53xx:blue:2ghz"; + gpios = <&chipcommon 4 GPIO_ACTIVE_HIGH>; + }; + + led-5ghz { + label = "bcm53xx:blue:5ghz"; + gpios = <&chipcommon 5 GPIO_ACTIVE_HIGH>; + }; + + led-usb3 { + label = "bcm53xx:blue:usb3"; + gpios = <&chipcommon 6 GPIO_ACTIVE_HIGH>; + trigger-sources = <&ohci_port1>, <&ehci_port1>, + <&xhci_port1>; + linux,default-trigger = "usbport"; + }; + + led-usb2 { + label = "bcm53xx:blue:usb2"; + gpios = <&chipcommon 7 GPIO_ACTIVE_HIGH>; + trigger-sources = <&ohci_port2>, <&ehci_port2>; + linux,default-trigger = "usbport"; + }; + + led-wan-blue { + label = "bcm53xx:blue:wan"; + gpios = <&chipcommon 14 GPIO_ACTIVE_HIGH>; + }; + + led-wan-amber { + label = "bcm53xx:amber:wan"; + gpios = <&chipcommon 15 GPIO_ACTIVE_HIGH>; + }; + + led-power { + label = "bcm53xx:blue:power"; + gpios = <&chipcommon 18 GPIO_ACTIVE_LOW>; + linux,default-trigger = "default-on"; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + + button-wps { + label = "WPS"; + linux,code = <KEY_WPS_BUTTON>; + gpios = <&chipcommon 0 GPIO_ACTIVE_LOW>; + }; + + button-restart { + label = "Reset"; + linux,code = <KEY_RESTART>; + gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>; + }; + }; +}; + +&usb2 { + vcc-gpio = <&chipcommon 13 GPIO_ACTIVE_HIGH>; +}; + +&usb3 { + vcc-gpio = <&chipcommon 12 GPIO_ACTIVE_HIGH>; +}; + +&spi_nor { + status = "okay"; + + partitions { + compatible = "tplink,safeloader-partitions"; + partitions-table-offset = <0xe50000>; + + partition-os-image { + compatible = "brcm,trx"; + }; + + partition-file-system { + linux,rootfs; + }; + }; +}; + +&usb3_phy { + status = "okay"; +}; diff --git a/dts/src/arm/broadcom/bcm4709.dtsi b/dts/src/arm/broadcom/bcm4709.dtsi new file mode 100644 index 0000000000..cba3d910be --- /dev/null +++ b/dts/src/arm/broadcom/bcm4709.dtsi @@ -0,0 +1,15 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Copyright (C) 2016 RafaÅ‚ MiÅ‚ecki <rafal@milecki.pl> + */ + +#include "bcm4708.dtsi" + +&uart0 { + clock-frequency = <125000000>; + status = "okay"; +}; + +&srab { + compatible = "brcm,bcm53012-srab", "brcm,bcm5301x-srab"; +}; diff --git a/dts/src/arm/broadcom/bcm47094-asus-rt-ac3100.dts b/dts/src/arm/broadcom/bcm47094-asus-rt-ac3100.dts new file mode 100644 index 0000000000..5f089307cd --- /dev/null +++ b/dts/src/arm/broadcom/bcm47094-asus-rt-ac3100.dts @@ -0,0 +1,23 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Author: Arınç ÃœNAL <arinc.unal@arinc9.com> + */ + +/dts-v1/; + +#include "bcm47094-asus-rt-ac3100.dtsi" + +/ { + compatible = "asus,rt-ac3100", "brcm,bcm47094", "brcm,bcm4708"; + model = "ASUS RT-AC3100"; + + nvram@1c080000 { + et0macaddr: et0macaddr { + }; + }; +}; + +&gmac0 { + nvmem-cells = <&et0macaddr>; + nvmem-cell-names = "mac-address"; +}; diff --git a/dts/src/arm/broadcom/bcm47094-asus-rt-ac3100.dtsi b/dts/src/arm/broadcom/bcm47094-asus-rt-ac3100.dtsi new file mode 100644 index 0000000000..09cefce27f --- /dev/null +++ b/dts/src/arm/broadcom/bcm47094-asus-rt-ac3100.dtsi @@ -0,0 +1,163 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Author: Arınç ÃœNAL <arinc.unal@arinc9.com> + */ + +#include "bcm47094.dtsi" +#include "bcm5301x-nand-cs0-bch8.dtsi" + +/ { + chosen { + bootargs = "earlycon"; + }; + + memory@0 { + device_type = "memory"; + reg = <0x00000000 0x08000000>, + <0x88000000 0x18000000>; + }; + + nvram@1c080000 { + compatible = "brcm,nvram"; + reg = <0x1c080000 0x00180000>; + }; + + leds { + compatible = "gpio-leds"; + + led-power { + label = "white:power"; + gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>; + linux,default-trigger = "default-on"; + }; + + led-wan-red { + label = "red:wan"; + gpios = <&chipcommon 5 GPIO_ACTIVE_HIGH>; + }; + + led-lan { + label = "white:lan"; + gpios = <&chipcommon 21 GPIO_ACTIVE_LOW>; + }; + + led-usb2 { + label = "white:usb2"; + gpios = <&chipcommon 16 GPIO_ACTIVE_LOW>; + trigger-sources = <&ehci_port2>; + linux,default-trigger = "usbport"; + }; + + led-usb3 { + label = "white:usb3"; + gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>; + trigger-sources = <&ehci_port1>, <&xhci_port1>; + linux,default-trigger = "usbport"; + }; + + led-wps { + label = "white:wps"; + gpios = <&chipcommon 19 GPIO_ACTIVE_LOW>; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + + button-wps { + label = "WPS"; + linux,code = <KEY_WPS_BUTTON>; + gpios = <&chipcommon 20 GPIO_ACTIVE_LOW>; + }; + + button-reset { + label = "Reset"; + linux,code = <KEY_RESTART>; + gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>; + }; + + button-wifi { + label = "Wi-Fi"; + linux,code = <KEY_RFKILL>; + gpios = <&chipcommon 18 GPIO_ACTIVE_LOW>; + }; + + button-led { + label = "Backlight"; + linux,code = <KEY_BRIGHTNESS_ZERO>; + gpios = <&chipcommon 4 GPIO_ACTIVE_LOW>; + }; + }; +}; + +&srab { + compatible = "brcm,bcm53012-srab", "brcm,bcm5301x-srab"; + status = "okay"; + + ports { + port@0 { + label = "lan4"; + }; + + port@1 { + label = "lan3"; + }; + + port@2 { + label = "lan2"; + }; + + port@3 { + label = "lan1"; + }; + + port@4 { + label = "wan"; + }; + + port@5 { + label = "cpu"; + }; + + port@7 { + label = "cpu"; + }; + + port@8 { + label = "cpu"; + }; + }; +}; + +&usb2 { + vcc-gpio = <&chipcommon 9 GPIO_ACTIVE_HIGH>; +}; + +&usb3_phy { + status = "okay"; +}; + +&nandcs { + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "boot"; + reg = <0x00000000 0x00080000>; + read-only; + }; + + partition@80000 { + label = "nvram"; + reg = <0x00080000 0x00180000>; + }; + + partition@200000 { + label = "firmware"; + reg = <0x00200000 0x07e00000>; + compatible = "brcm,trx"; + }; + }; +}; diff --git a/dts/src/arm/broadcom/bcm47094-asus-rt-ac88u.dts b/dts/src/arm/broadcom/bcm47094-asus-rt-ac88u.dts new file mode 100644 index 0000000000..fd344b5508 --- /dev/null +++ b/dts/src/arm/broadcom/bcm47094-asus-rt-ac88u.dts @@ -0,0 +1,122 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Author: Arınç ÃœNAL <arinc.unal@arinc9.com> + */ + +/dts-v1/; + +#include "bcm47094-asus-rt-ac3100.dtsi" + +/ { + compatible = "asus,rt-ac88u", "brcm,bcm47094", "brcm,bcm4708"; + model = "ASUS RT-AC88U"; + + nvram@1c080000 { + et1macaddr: et1macaddr { + }; + }; + + switch { + compatible = "realtek,rtl8365mb"; + /* 7 = MDIO (has input reads), 6 = MDC (clock, output only) */ + mdc-gpios = <&chipcommon 6 GPIO_ACTIVE_HIGH>; + mdio-gpios = <&chipcommon 7 GPIO_ACTIVE_HIGH>; + reset-gpios = <&chipcommon 10 GPIO_ACTIVE_LOW>; + realtek,disable-leds; + dsa,member = <1 0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + label = "lan5"; + phy-handle = <ðphy0>; + }; + + port@1 { + reg = <1>; + label = "lan6"; + phy-handle = <ðphy1>; + }; + + port@2 { + reg = <2>; + label = "lan7"; + phy-handle = <ðphy2>; + }; + + port@3 { + reg = <3>; + label = "lan8"; + phy-handle = <ðphy3>; + }; + + port@6 { + reg = <6>; + label = "cpu"; + ethernet = <&sw0_p5>; + phy-mode = "rgmii"; + tx-internal-delay-ps = <2000>; + rx-internal-delay-ps = <2100>; + + fixed-link { + speed = <1000>; + full-duplex; + pause; + }; + }; + }; + + mdio { + compatible = "realtek,smi-mdio"; + #address-cells = <1>; + #size-cells = <0>; + + ethphy0: ethernet-phy@0 { + reg = <0>; + }; + + ethphy1: ethernet-phy@1 { + reg = <1>; + }; + + ethphy2: ethernet-phy@2 { + reg = <2>; + }; + + ethphy3: ethernet-phy@3 { + reg = <3>; + }; + }; + }; +}; + +&srab { + dsa,member = <0 0>; + + ports { + sw0_p5: port@5 { + /delete-property/ethernet; + + label = "extsw"; + phy-mode = "rgmii"; + + fixed-link { + speed = <1000>; + full-duplex; + pause; + }; + }; + }; +}; + +&gmac0 { + status = "disabled"; +}; + +&gmac1 { + nvmem-cells = <&et1macaddr>; + nvmem-cell-names = "mac-address"; +}; diff --git a/dts/src/arm/broadcom/bcm47094-dlink-dir-885l.dts b/dts/src/arm/broadcom/bcm47094-dlink-dir-885l.dts new file mode 100644 index 0000000000..c5099defe9 --- /dev/null +++ b/dts/src/arm/broadcom/bcm47094-dlink-dir-885l.dts @@ -0,0 +1,175 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Broadcom BCM470X / BCM5301X ARM platform code. + * DTS for D-Link DIR-885L + * + * Copyright (C) 2016 RafaÅ‚ MiÅ‚ecki <zajec5@gmail.com> + */ + +/dts-v1/; + +#include "bcm47094.dtsi" +#include "bcm5301x-nand-cs0-bch1.dtsi" + +/ { + compatible = "dlink,dir-885l", "brcm,bcm47094", "brcm,bcm4708"; + model = "D-Link DIR-885L"; + + chosen { + bootargs = "console=ttyS0,115200 earlycon"; + }; + + memory@0 { + device_type = "memory"; + reg = <0x00000000 0x08000000>, + <0x88000000 0x08000000>; + }; + + nvram@1e3f0000 { + compatible = "brcm,nvram"; + reg = <0x1e3f0000 0x10000>; + + et2macaddr: et2macaddr { + #nvmem-cell-cells = <1>; + }; + }; + + nand_controller: nand-controller@18028000 { + nand@0 { + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + compatible = "seama"; + label = "firmware"; + reg = <0x00000000 0x08000000>; + }; + }; + }; + }; + + leds { + compatible = "gpio-leds"; + + led-power-white { + label = "bcm53xx:white:power"; + gpios = <&chipcommon 0 GPIO_ACTIVE_LOW>; + linux,default-trigger = "default-on"; + }; + + led-wan-white { + label = "bcm53xx:white:wan"; + gpios = <&chipcommon 1 GPIO_ACTIVE_LOW>; + }; + + led-power-amber { + label = "bcm53xx:amber:power"; + gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>; + }; + + led-wan-amber { + label = "bcm53xx:amber:wan"; + gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>; + }; + + led-usb3-white { + label = "bcm53xx:white:usb3"; + gpios = <&chipcommon 8 GPIO_ACTIVE_LOW>; + trigger-sources = <&ohci_port1>, <&ehci_port1>, + <&xhci_port1>; + linux,default-trigger = "usbport"; + }; + + led-2ghz { + label = "bcm53xx:white:2ghz"; + gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>; + }; + + led-5ghz { + label = "bcm53xx:white:5ghz"; + gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + + button-wps { + label = "WPS"; + linux,code = <KEY_WPS_BUTTON>; + gpios = <&chipcommon 7 GPIO_ACTIVE_LOW>; + }; + + /* Switch: router / extender */ + button-extender { + label = "Extender"; + linux,code = <BTN_0>; + gpios = <&chipcommon 10 GPIO_ACTIVE_LOW>; + }; + + button-restart { + label = "Reset"; + linux,code = <KEY_RESTART>; + gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>; + }; + }; +}; + +&usb3 { + vcc-gpio = <&chipcommon 18 GPIO_ACTIVE_HIGH>; +}; + +&gmac0 { + nvmem-cells = <&et2macaddr 0>; + nvmem-cell-names = "mac-address"; +}; + +&spi_nor { + status = "okay"; +}; + +&usb3_phy { + status = "okay"; +}; + +&srab { + status = "okay"; + + ports { + port@0 { + label = "lan4"; + }; + + port@1 { + label = "lan3"; + }; + + port@2 { + label = "lan2"; + }; + + port@3 { + label = "lan1"; + }; + + port@4 { + label = "wan"; + nvmem-cells = <&et2macaddr 3>; + nvmem-cell-names = "mac-address"; + }; + + port@5 { + status = "disabled"; + }; + + port@7 { + status = "disabled"; + }; + + port@8 { + label = "cpu"; + }; + }; +}; diff --git a/dts/src/arm/broadcom/bcm47094-dlink-dir-890l.dts b/dts/src/arm/broadcom/bcm47094-dlink-dir-890l.dts new file mode 100644 index 0000000000..3124dfd01b --- /dev/null +++ b/dts/src/arm/broadcom/bcm47094-dlink-dir-890l.dts @@ -0,0 +1,208 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Device tree for D-Link DIR-890L + * D-Link calls this board "WRGAC36" + * this router has the same looks and form factor as D-Link DIR-885L. + * + * Some differences from DIR-885L include a separate USB2 port, separate LEDs + * for USB2 and USB3, a separate VCC supply for the USB2 slot and no + * router/extender switch is mounted (there is an empty mount point on the + * PCB) so this device is a pure router. Also the LAN ports are in the right + * order. + * + * Based on the device tree for DIR-885L + * Copyright (C) 2016 RafaÅ‚ MiÅ‚ecki <zajec5@gmail.com> + * Copyright (C) 2022 Linus Walleij + */ + +/dts-v1/; + +#include "bcm47094.dtsi" +#include "bcm5301x-nand-cs0-bch1.dtsi" + +/ { + compatible = "dlink,dir-890l", "brcm,bcm47094", "brcm,bcm4708"; + model = "D-Link DIR-890L"; + + chosen { + bootargs = "console=ttyS0,115200 earlycon"; + }; + + memory@0 { + device_type = "memory"; + reg = <0x00000000 0x08000000>, + <0x88000000 0x08000000>; + }; + + leds { + /* + * LED information is derived from the boot log which + * conveniently lists all the LEDs. + */ + compatible = "gpio-leds"; + + led-power-white { + label = "bcm53xx:white:power"; + gpios = <&chipcommon 0 GPIO_ACTIVE_LOW>; + linux,default-trigger = "default-on"; + }; + + led-wan-white { + label = "bcm53xx:white:wan"; + gpios = <&chipcommon 1 GPIO_ACTIVE_LOW>; + }; + + led-power-amber { + label = "bcm53xx:amber:power"; + gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>; + }; + + led-wan-amber { + label = "bcm53xx:amber:wan"; + gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>; + }; + + led-usb3-white { + label = "bcm53xx:white:usb3"; + gpios = <&chipcommon 8 GPIO_ACTIVE_LOW>; + trigger-sources = <&xhci_port1>; + linux,default-trigger = "usbport"; + }; + + led-usb2-white { + label = "bcm53xx:white:usb2"; + gpios = <&chipcommon 15 GPIO_ACTIVE_LOW>; + trigger-sources = <&ohci_port1>, <&ehci_port1>; + linux,default-trigger = "usbport"; + }; + + led-2ghz { + label = "bcm53xx:white:2ghz"; + gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>; + }; + + led-5ghz { + label = "bcm53xx:white:5ghz"; + gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + + button-wps { + label = "WPS"; + linux,code = <KEY_WPS_BUTTON>; + gpios = <&chipcommon 7 GPIO_ACTIVE_LOW>; + }; + + /* Called "factory reset" in the vendor dmesg */ + button-restart { + label = "Reset"; + linux,code = <KEY_RESTART>; + gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>; + }; + }; + + /* + * The flash memory is memory mapped at 0x1e000000-0x1fffffff + * 64KB blocks; total size 2MB, same that can be + * found attached to the spi_nor SPI controller. + */ + nvram@1e1f0000 { + compatible = "brcm,nvram"; + reg = <0x1e1f0000 0x00010000>; + + et0macaddr: et0macaddr { + }; + }; +}; + +&gmac2 { + /* + * The NVRAM curiously does not contain a MAC address + * for et2 so since that is the only ethernet interface + * actually in use on the platform, we use this et0 MAC + * address for et2. + */ + nvmem-cells = <&et0macaddr>; + nvmem-cell-names = "mac-address"; +}; + +&spi_nor { + status = "okay"; +}; + +&nandcs { + /* Spansion S34ML01G2, 128MB with 128KB erase blocks */ + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + /* + * This is called "nflash" in the vendor kernel with + * "upgrade" and "rootfs" (probably using OpenWrt + * splitpart). We call it "firmware" like standard tools + * assume. The CFE loader contains incorrect information + * about TRX partitions, ignore this, there are no TRX + * partitions: this device uses SEAMA. + */ + firmware@0 { + compatible = "seama"; + label = "firmware"; + reg = <0x00000000 0x08000000>; + }; + }; +}; + +&usb2 { + vcc-gpios = <&chipcommon 21 GPIO_ACTIVE_HIGH>; +}; + +&usb3 { + vcc-gpios = <&chipcommon 18 GPIO_ACTIVE_HIGH>; +}; + +&usb3_phy { + status = "okay"; +}; + +&srab { + status = "okay"; + + ports { + port@0 { + label = "lan1"; + }; + + port@1 { + label = "lan2"; + }; + + port@2 { + label = "lan3"; + }; + + port@3 { + label = "lan4"; + }; + + port@4 { + label = "wan"; + }; + + port@5 { + status = "disabled"; + }; + + port@7 { + status = "disabled"; + }; + + port@8 { + label = "cpu"; + phy-mode = "rgmii"; + }; + }; +}; diff --git a/dts/src/arm/broadcom/bcm47094-linksys-panamera.dts b/dts/src/arm/broadcom/bcm47094-linksys-panamera.dts new file mode 100644 index 0000000000..2b5c80d835 --- /dev/null +++ b/dts/src/arm/broadcom/bcm47094-linksys-panamera.dts @@ -0,0 +1,302 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Copyright (C) 2017 RafaÅ‚ MiÅ‚ecki <rafal@milecki.pl> + */ + +/dts-v1/; + +#include "bcm47094.dtsi" +#include "bcm5301x-nand-cs0-bch8.dtsi" + +/ { + compatible = "linksys,panamera", "brcm,bcm47094", "brcm,bcm4708"; + model = "Linksys EA9500"; + + chosen { + bootargs = "console=ttyS0,115200"; + }; + + memory@0 { + device_type = "memory"; + reg = <0x00000000 0x08000000>, + <0x88000000 0x08000000>; + }; + + nvram@1c080000 { + compatible = "brcm,nvram"; + reg = <0x1c080000 0x100000>; + }; + + gpio-keys { + compatible = "gpio-keys"; + + button-wps { + label = "WPS"; + linux,code = <KEY_WPS_BUTTON>; + gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>; + }; + + button-rfkill { + label = "WiFi"; + linux,code = <KEY_RFKILL>; + gpios = <&chipcommon 16 GPIO_ACTIVE_LOW>; + }; + + button-reset { + label = "Reset"; + linux,code = <KEY_RESTART>; + gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>; + }; + }; + + leds { + compatible = "gpio-leds"; + + led-wps { + label = "bcm53xx:white:wps"; + gpios = <&chipcommon 22 GPIO_ACTIVE_LOW>; + }; + + led-usb2 { + label = "bcm53xx:green:usb2"; + gpios = <&chipcommon 1 GPIO_ACTIVE_LOW>; + trigger-sources = <&ohci_port2>, <&ehci_port2>; + linux,default-trigger = "usbport"; + }; + + led-usb3 { + label = "bcm53xx:green:usb3"; + gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>; + trigger-sources = <&ohci_port1>, <&ehci_port1>, + <&xhci_port1>; + linux,default-trigger = "usbport"; + }; + + led-power { + label = "bcm53xx:white:power"; + gpios = <&chipcommon 4 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "default-on"; + }; + + led-wifi-disabled { + label = "bcm53xx:amber:wifi-disabled"; + gpios = <&chipcommon 0 GPIO_ACTIVE_LOW>; + }; + + led-wifi-enabled { + label = "bcm53xx:white:wifi-enabled"; + gpios = <&chipcommon 5 GPIO_ACTIVE_HIGH>; + }; + + led-bluebar1 { + label = "bcm53xx:white:bluebar1"; + gpios = <&chipcommon 11 GPIO_ACTIVE_HIGH>; + }; + + led-bluebar2 { + label = "bcm53xx:white:bluebar2"; + gpios = <&chipcommon 12 GPIO_ACTIVE_HIGH>; + }; + + led-bluebar3 { + label = "bcm53xx:white:bluebar3"; + gpios = <&chipcommon 15 GPIO_ACTIVE_LOW>; + }; + + led-bluebar4 { + label = "bcm53xx:white:bluebar4"; + gpios = <&chipcommon 18 GPIO_ACTIVE_HIGH>; + }; + + led-bluebar5 { + label = "bcm53xx:white:bluebar5"; + gpios = <&chipcommon 19 GPIO_ACTIVE_HIGH>; + }; + + led-bluebar6 { + label = "bcm53xx:white:bluebar6"; + gpios = <&chipcommon 20 GPIO_ACTIVE_HIGH>; + }; + + led-bluebar7 { + label = "bcm53xx:white:bluebar7"; + gpios = <&chipcommon 21 GPIO_ACTIVE_HIGH>; + }; + + led-bluebar8 { + label = "bcm53xx:white:bluebar8"; + gpios = <&chipcommon 8 GPIO_ACTIVE_HIGH>; + }; + }; + + mdio-mux@18003000 { + + /* BIT(9) = 1 => external mdio */ + mdio@200 { + reg = <0x200>; + #address-cells = <1>; + #size-cells = <0>; + + switch@0 { + compatible = "brcm,bcm53125"; + #address-cells = <1>; + #size-cells = <0>; + reset-gpios = <&chipcommon 10 GPIO_ACTIVE_LOW>; + reset-names = "robo_reset"; + reg = <0>; + dsa,member = <1 0>; + pinctrl-names = "default"; + pinctrl-0 = <&pinmux_mdio>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + label = "lan1"; + }; + + port@1 { + reg = <1>; + label = "lan5"; + }; + + port@2 { + reg = <2>; + label = "lan2"; + }; + + port@3 { + reg = <3>; + label = "lan6"; + }; + + port@4 { + reg = <4>; + label = "lan3"; + }; + + sw1_p8: port@8 { + reg = <8>; + ethernet = <&sw0_p0>; + label = "cpu"; + + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + }; + }; + }; + }; +}; + +&usb2 { + vcc-gpio = <&chipcommon 13 GPIO_ACTIVE_HIGH>; +}; + +&usb3 { + vcc-gpio = <&chipcommon 14 GPIO_ACTIVE_HIGH>; +}; + +&srab { + compatible = "brcm,bcm53012-srab", "brcm,bcm5301x-srab"; + status = "okay"; + dsa,member = <0 0>; + + ports { + sw0_p0: port@0 { + label = "extsw"; + + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + + port@1 { + label = "lan7"; + }; + + port@2 { + label = "lan4"; + }; + + port@3 { + label = "lan8"; + }; + + port@4 { + label = "wan"; + }; + + port@5 { + label = "cpu"; + status = "disabled"; + + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + + port@7 { + label = "cpu"; + status = "disabled"; + + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + + port@8 { + label = "cpu"; + }; + }; +}; + +&usb3_phy { + status = "okay"; +}; + +&nandcs { + partitions { + compatible = "linksys,ns-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "boot"; + reg = <0x0000000 0x0080000>; + read-only; + }; + + partition@80000 { + label = "nvram"; + reg = <0x080000 0x0100000>; + }; + + partition@180000 { + label = "devinfo"; + reg = <0x0180000 0x080000>; + }; + + partition@200000 { + reg = <0x0200000 0x01d00000>; + compatible = "linksys,ns-firmware", "brcm,trx"; + }; + + partition@1f00000 { + reg = <0x01f00000 0x01d00000>; + compatible = "linksys,ns-firmware", "brcm,trx"; + }; + + partition@5200000 { + label = "system"; + reg = <0x05200000 0x02e00000>; + }; + }; +}; diff --git a/dts/src/arm/broadcom/bcm47094-luxul-abr-4500.dts b/dts/src/arm/broadcom/bcm47094-luxul-abr-4500.dts new file mode 100644 index 0000000000..e374062eb5 --- /dev/null +++ b/dts/src/arm/broadcom/bcm47094-luxul-abr-4500.dts @@ -0,0 +1,119 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Copyright (C) 2017 Luxul Inc. + */ + +/dts-v1/; + +#include "bcm4708.dtsi" +#include "bcm5301x-nand-cs0-bch8.dtsi" + +/ { + compatible = "luxul,abr-4500-v1", "brcm,bcm47094", "brcm,bcm4708"; + model = "Luxul ABR-4500 V1"; + + chosen { + bootargs = "earlycon"; + }; + + memory@0 { + device_type = "memory"; + reg = <0x00000000 0x08000000>, + <0x88000000 0x18000000>; + }; + + nvram@1eff0000 { + compatible = "brcm,nvram"; + reg = <0x1eff0000 0x10000>; + + et0macaddr: et0macaddr { + #nvmem-cell-cells = <1>; + }; + }; + + leds { + compatible = "gpio-leds"; + + led-status { + label = "bcm53xx:green:status"; + gpios = <&chipcommon 20 GPIO_ACTIVE_LOW>; + linux,default-trigger = "timer"; + }; + + led-usb3 { + label = "bcm53xx:green:usb3"; + gpios = <&chipcommon 19 GPIO_ACTIVE_LOW>; + trigger-sources = <&ohci_port1>, <&ehci_port1>, + <&xhci_port1>; + linux,default-trigger = "usbport"; + }; + + }; + + gpio-keys { + compatible = "gpio-keys"; + + button-restart { + label = "Reset"; + linux,code = <KEY_RESTART>; + gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>; + }; + }; +}; + +&usb3 { + vcc-gpio = <&chipcommon 18 GPIO_ACTIVE_HIGH>; +}; + +&gmac0 { + nvmem-cells = <&et0macaddr 0>; + nvmem-cell-names = "mac-address"; +}; + +&spi_nor { + status = "okay"; +}; + +&usb3_phy { + status = "okay"; +}; + +&srab { + status = "okay"; + + ports { + port@0 { + label = "wan"; + nvmem-cells = <&et0macaddr 1>; + nvmem-cell-names = "mac-address"; + }; + + port@1 { + label = "lan4"; + }; + + port@2 { + label = "lan3"; + }; + + port@3 { + label = "lan2"; + }; + + port@4 { + label = "lan1"; + }; + + port@5 { + label = "cpu"; + }; + + port@7 { + status = "disabled"; + }; + + port@8 { + status = "disabled"; + }; + }; +}; diff --git a/dts/src/arm/broadcom/bcm47094-luxul-xap-1610.dts b/dts/src/arm/broadcom/bcm47094-luxul-xap-1610.dts new file mode 100644 index 0000000000..badafa024d --- /dev/null +++ b/dts/src/arm/broadcom/bcm47094-luxul-xap-1610.dts @@ -0,0 +1,132 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Copyright 2018 Luxul Inc. + */ + +/dts-v1/; + +#include "bcm47094.dtsi" + +/ { + compatible = "luxul,xap-1610-v1", "brcm,bcm47094", "brcm,bcm4708"; + model = "Luxul XAP-1610 V1"; + + chosen { + bootargs = "earlycon"; + }; + + memory@0 { + device_type = "memory"; + reg = <0x00000000 0x08000000>; + }; + + nvram@1eff0000 { + compatible = "brcm,nvram"; + reg = <0x1eff0000 0x10000>; + + et0macaddr: et0macaddr { + }; + }; + + leds { + compatible = "gpio-leds"; + + led-status { + label = "bcm53xx:green:status"; + gpios = <&chipcommon 0 GPIO_ACTIVE_LOW>; + linux,default-trigger = "timer"; + }; + + led-2ghz { + label = "bcm53xx:blue:2ghz"; + gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>; + }; + + led-5ghz { + label = "bcm53xx:blue:5ghz"; + gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + + button-restart { + label = "Reset"; + linux,code = <KEY_RESTART>; + gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>; + }; + }; +}; + +&gmac0 { + nvmem-cells = <&et0macaddr>; + nvmem-cell-names = "mac-address"; +}; + + +&pcie0 { + #address-cells = <3>; + #size-cells = <2>; + + bridge@0,0 { + reg = <0x0000 0 0 0 0>; + + #address-cells = <3>; + #size-cells = <2>; + + wifi@0,0 { + compatible = "brcm,bcm4366-fmac", "brcm,bcm4329-fmac"; + reg = <0x0000 0 0 0 0>; + brcm,ccode-map = "AU-AU-920", "CA-CA-892", "GB-DE-964", "NZ-AU-920", "US-US-825"; + }; + }; +}; + +&pcie1 { + #address-cells = <3>; + #size-cells = <2>; + + bridge@0,0 { + reg = <0x0000 0 0 0 0>; + + #address-cells = <3>; + #size-cells = <2>; + + wifi@0,0 { + compatible = "brcm,bcm4366-fmac", "brcm,bcm4329-fmac"; + reg = <0x0000 0 0 0 0>; + brcm,ccode-map = "AU-AU-920", "CA-CA-892", "GB-DE-964", "NZ-AU-920", "US-US-825"; + }; + }; +}; + +&spi_nor { + status = "okay"; +}; + +&srab { + status = "okay"; + + ports { + port@0 { + label = "poe"; + }; + + port@1 { + label = "lan"; + }; + + port@5 { + label = "cpu"; + }; + + port@7 { + status = "disabled"; + }; + + port@8 { + status = "disabled"; + }; + }; +}; diff --git a/dts/src/arm/broadcom/bcm47094-luxul-xbr-4500.dts b/dts/src/arm/broadcom/bcm47094-luxul-xbr-4500.dts new file mode 100644 index 0000000000..cf95af9db1 --- /dev/null +++ b/dts/src/arm/broadcom/bcm47094-luxul-xbr-4500.dts @@ -0,0 +1,119 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Copyright (C) 2017 Luxul Inc. + */ + +/dts-v1/; + +#include "bcm4708.dtsi" +#include "bcm5301x-nand-cs0-bch8.dtsi" + +/ { + compatible = "luxul,xbr-4500-v1", "brcm,bcm47094", "brcm,bcm4708"; + model = "Luxul XBR-4500 V1"; + + chosen { + bootargs = "earlycon"; + }; + + memory@0 { + device_type = "memory"; + reg = <0x00000000 0x08000000>, + <0x88000000 0x18000000>; + }; + + nvram@1eff0000 { + compatible = "brcm,nvram"; + reg = <0x1eff0000 0x10000>; + + et0macaddr: et0macaddr { + #nvmem-cell-cells = <1>; + }; + }; + + leds { + compatible = "gpio-leds"; + + led-status { + label = "bcm53xx:green:status"; + gpios = <&chipcommon 20 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "timer"; + }; + + led-usb3 { + label = "bcm53xx:green:usb3"; + gpios = <&chipcommon 19 GPIO_ACTIVE_HIGH>; + trigger-sources = <&ohci_port1>, <&ehci_port1>, + <&xhci_port1>; + linux,default-trigger = "usbport"; + }; + + }; + + gpio-keys { + compatible = "gpio-keys"; + + button-restart { + label = "Reset"; + linux,code = <KEY_RESTART>; + gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>; + }; + }; +}; + +&usb3 { + vcc-gpio = <&chipcommon 18 GPIO_ACTIVE_HIGH>; +}; + +&gmac0 { + nvmem-cells = <&et0macaddr 0>; + nvmem-cell-names = "mac-address"; +}; + +&spi_nor { + status = "okay"; +}; + +&usb3_phy { + status = "okay"; +}; + +&srab { + status = "okay"; + + ports { + port@0 { + label = "wan"; + nvmem-cells = <&et0macaddr 1>; + nvmem-cell-names = "mac-address"; + }; + + port@1 { + label = "lan4"; + }; + + port@2 { + label = "lan3"; + }; + + port@3 { + label = "lan2"; + }; + + port@4 { + label = "lan1"; + }; + + port@5 { + label = "cpu"; + }; + + port@7 { + status = "disabled"; + }; + + port@8 { + status = "disabled"; + }; + }; +}; diff --git a/dts/src/arm/broadcom/bcm47094-luxul-xwc-2000.dts b/dts/src/arm/broadcom/bcm47094-luxul-xwc-2000.dts new file mode 100644 index 0000000000..992c19e1cf --- /dev/null +++ b/dts/src/arm/broadcom/bcm47094-luxul-xwc-2000.dts @@ -0,0 +1,87 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Copyright 2019 Legrand AV Inc. + */ + +/dts-v1/; + +#include "bcm47094.dtsi" +#include "bcm5301x-nand-cs0-bch8.dtsi" + +/ { + compatible = "luxul,xwc-2000-v1", "brcm,bcm47094", "brcm,bcm4708"; + model = "Luxul XWC-2000 V1"; + + chosen { + bootargs = "earlycon"; + }; + + memory@0 { + device_type = "memory"; + reg = <0x00000000 0x08000000>, + <0x88000000 0x18000000>; + }; + + nvram@1eff0000 { + compatible = "brcm,nvram"; + reg = <0x1eff0000 0x10000>; + + et0macaddr: et0macaddr { + }; + }; + + leds { + compatible = "gpio-leds"; + + led-status { + label = "bcm53xx:green:status"; + gpios = <&chipcommon 18 GPIO_ACTIVE_LOW>; + linux,default-trigger = "timer"; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + + button-restart { + label = "Reset"; + linux,code = <KEY_RESTART>; + gpios = <&chipcommon 19 GPIO_ACTIVE_LOW>; + }; + }; +}; + +&uart1 { + status = "okay"; +}; + +&gmac0 { + nvmem-cells = <&et0macaddr>; + nvmem-cell-names = "mac-address"; +}; + +&spi_nor { + status = "okay"; +}; + +&srab { + status = "okay"; + + ports { + port@0 { + label = "lan"; + }; + + port@5 { + label = "cpu"; + }; + + port@7 { + status = "disabled"; + }; + + port@8 { + status = "disabled"; + }; + }; +}; diff --git a/dts/src/arm/broadcom/bcm47094-luxul-xwr-3100.dts b/dts/src/arm/broadcom/bcm47094-luxul-xwr-3100.dts new file mode 100644 index 0000000000..4d0ba315a2 --- /dev/null +++ b/dts/src/arm/broadcom/bcm47094-luxul-xwr-3100.dts @@ -0,0 +1,159 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Copyright 2016 Luxul Inc. + */ + +/dts-v1/; + +#include "bcm47094.dtsi" +#include "bcm5301x-nand-cs0-bch4.dtsi" + +/ { + compatible = "luxul,xwr-3100-v1", "brcm,bcm47094", "brcm,bcm4708"; + model = "Luxul XWR-3100 V1"; + + chosen { + bootargs = "console=ttyS0,115200 earlycon"; + }; + + memory@0 { + device_type = "memory"; + reg = <0x00000000 0x08000000>, + <0x88000000 0x08000000>; + }; + + nvram@1eff0000 { + compatible = "brcm,nvram"; + reg = <0x1eff0000 0x10000>; + + et0macaddr: et0macaddr { + #nvmem-cell-cells = <1>; + }; + }; + + leds { + compatible = "gpio-leds"; + + led-power { + label = "bcm53xx:green:power"; + gpios = <&chipcommon 0 GPIO_ACTIVE_LOW>; + linux,default-trigger = "default-on"; + }; + + led-lan3 { + label = "bcm53xx:green:lan3"; + gpios = <&chipcommon 1 GPIO_ACTIVE_LOW>; + }; + + led-lan4 { + label = "bcm53xx:green:lan4"; + gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>; + }; + + led-wan { + label = "bcm53xx:green:wan"; + gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>; + }; + + led-lan1 { + label = "bcm53xx:green:lan1"; + gpios = <&chipcommon 4 GPIO_ACTIVE_LOW>; + }; + + led-lan2 { + label = "bcm53xx:green:lan2"; + gpios = <&chipcommon 6 GPIO_ACTIVE_LOW>; + }; + + led-usb3 { + label = "bcm53xx:green:usb3"; + gpios = <&chipcommon 8 GPIO_ACTIVE_LOW>; + trigger-sources = <&ohci_port1>, <&ehci_port1>, + <&xhci_port1>; + linux,default-trigger = "usbport"; + }; + + led-status { + label = "bcm53xx:green:status"; + gpios = <&chipcommon 10 GPIO_ACTIVE_LOW>; + linux,default-trigger = "timer"; + }; + + led-2ghz { + label = "bcm53xx:green:2ghz"; + gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>; + }; + + led-5ghz { + label = "bcm53xx:green:5ghz"; + gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + + button-restart { + label = "Reset"; + linux,code = <KEY_RESTART>; + gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>; + }; + }; +}; + +&usb3 { + vcc-gpio = <&chipcommon 18 GPIO_ACTIVE_HIGH>; +}; + +&gmac0 { + nvmem-cells = <&et0macaddr 0>; + nvmem-cell-names = "mac-address"; +}; + +&spi_nor { + status = "okay"; +}; + +&usb3_phy { + status = "okay"; +}; + +&srab { + status = "okay"; + + ports { + port@0 { + label = "lan4"; + }; + + port@1 { + label = "lan3"; + }; + + port@2 { + label = "lan2"; + }; + + port@3 { + label = "lan1"; + }; + + port@4 { + label = "wan"; + nvmem-cells = <&et0macaddr 5>; + nvmem-cell-names = "mac-address"; + }; + + port@5 { + label = "cpu"; + }; + + port@7 { + status = "disabled"; + }; + + port@8 { + status = "disabled"; + }; + }; +}; diff --git a/dts/src/arm/broadcom/bcm47094-luxul-xwr-3150-v1.dts b/dts/src/arm/broadcom/bcm47094-luxul-xwr-3150-v1.dts new file mode 100644 index 0000000000..83c429afc2 --- /dev/null +++ b/dts/src/arm/broadcom/bcm47094-luxul-xwr-3150-v1.dts @@ -0,0 +1,170 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Copyright 2018 Luxul Inc. + */ + +/dts-v1/; + +#include "bcm47094.dtsi" +#include "bcm5301x-nand-cs0-bch8.dtsi" + +/ { + compatible = "luxul,xwr-3150-v1", "brcm,bcm47094", "brcm,bcm4708"; + model = "Luxul XWR-3150 V1"; + + chosen { + bootargs = "earlycon"; + }; + + memory@0 { + device_type = "memory"; + reg = <0x00000000 0x08000000>, + <0x88000000 0x18000000>; + }; + + nvram@1eff0000 { + compatible = "brcm,nvram"; + reg = <0x1eff0000 0x10000>; + + et0macaddr: et0macaddr { + #nvmem-cell-cells = <1>; + }; + }; + + leds { + compatible = "gpio-leds"; + + led-power { + label = "bcm53xx:green:power"; + gpios = <&chipcommon 0 GPIO_ACTIVE_LOW>; + linux,default-trigger = "default-on"; + }; + + led-usb3 { + label = "bcm53xx:green:usb3"; + gpios = <&chipcommon 8 GPIO_ACTIVE_LOW>; + trigger-sources = <&ohci_port1>, <&ehci_port1>, + <&xhci_port1>; + linux,default-trigger = "usbport"; + }; + + led-status { + label = "bcm53xx:green:status"; + gpios = <&chipcommon 10 GPIO_ACTIVE_LOW>; + linux,default-trigger = "timer"; + }; + + led-2ghz { + label = "bcm53xx:green:2ghz"; + gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>; + }; + + led-5ghz { + label = "bcm53xx:green:5ghz"; + gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + + button-restart { + label = "Reset"; + linux,code = <KEY_RESTART>; + gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>; + }; + }; +}; + +&gmac0 { + nvmem-cells = <&et0macaddr 0>; + nvmem-cell-names = "mac-address"; +}; + +&pcie0 { + #address-cells = <3>; + #size-cells = <2>; + + bridge@0,0 { + reg = <0x0000 0 0 0 0>; + + #address-cells = <3>; + #size-cells = <2>; + + wifi@0,0 { + compatible = "brcm,bcm4366-fmac", "brcm,bcm4329-fmac"; + reg = <0x0000 0 0 0 0>; + brcm,ccode-map = "AU-AU-953", "CA-CA-946", "GB-E0-846", "NZ-AU-953", "US-Q2-930"; + }; + }; +}; + +&pcie1 { + #address-cells = <3>; + #size-cells = <2>; + + bridge@0,0 { + reg = <0x0000 0 0 0 0>; + + #address-cells = <3>; + #size-cells = <2>; + + wifi@0,0 { + compatible = "brcm,bcm4366-fmac", "brcm,bcm4329-fmac"; + reg = <0x0000 0 0 0 0>; + brcm,ccode-map = "AU-AU-953", "CA-CA-946", "GB-E0-846", "NZ-AU-953", "US-Q2-930"; + }; + }; +}; + +&usb3 { + vcc-gpio = <&chipcommon 18 GPIO_ACTIVE_HIGH>; +}; + +&usb3_phy { + status = "okay"; +}; + +&spi_nor { + status = "okay"; +}; + +&srab { + status = "okay"; + + ports { + port@0 { + label = "lan4"; + }; + + port@1 { + label = "lan3"; + }; + + port@2 { + label = "lan2"; + }; + + port@3 { + label = "lan1"; + }; + + port@4 { + label = "wan"; + nvmem-cells = <&et0macaddr 5>; + nvmem-cell-names = "mac-address"; + }; + + port@5 { + label = "cpu"; + }; + + port@7 { + status = "disabled"; + }; + + port@8 { + status = "disabled"; + }; + }; +}; diff --git a/dts/src/arm/broadcom/bcm47094-netgear-r8500.dts b/dts/src/arm/broadcom/bcm47094-netgear-r8500.dts new file mode 100644 index 0000000000..76d5626106 --- /dev/null +++ b/dts/src/arm/broadcom/bcm47094-netgear-r8500.dts @@ -0,0 +1,96 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Copyright (C) 2016 RafaÅ‚ MiÅ‚ecki <rafal@milecki.pl> + */ + +/dts-v1/; + +#include "bcm47094.dtsi" +#include "bcm5301x-nand-cs0-bch8.dtsi" + +/ { + compatible = "netgear,r8500", "brcm,bcm47094", "brcm,bcm4708"; + model = "Netgear R8500"; + + chosen { + bootargs = "console=ttyS0,115200"; + }; + + memory@0 { + device_type = "memory"; + reg = <0x00000000 0x08000000>, + <0x88000000 0x18000000>; + }; + + leds { + compatible = "gpio-leds"; + + led-power0 { + label = "bcm53xx:white:power"; + gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>; + linux,default-trigger = "default-on"; + }; + + led-power1 { + label = "bcm53xx:amber:power"; + gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>; + }; + + led-5ghz-1 { + label = "bcm53xx:white:5ghz-1"; + gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>; + }; + + led-5ghz-2 { + label = "bcm53xx:white:5ghz-2"; + gpios = <&chipcommon 12 GPIO_ACTIVE_LOW>; + }; + + led-2ghz { + label = "bcm53xx:white:2ghz"; + gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>; + }; + + led-usb2 { + label = "bcm53xx:white:usb2"; + gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>; + }; + + led-usb3 { + label = "bcm53xx:white:usb3"; + gpios = <&chipcommon 18 GPIO_ACTIVE_LOW>; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + + button-brightness { + label = "Backlight"; + linux,code = <KEY_BRIGHTNESS_ZERO>; + gpios = <&chipcommon 1 GPIO_ACTIVE_LOW>; + }; + + button-restart { + label = "Reset"; + linux,code = <KEY_RESTART>; + gpios = <&chipcommon 10 GPIO_ACTIVE_LOW>; + }; + + button-wps { + label = "WPS"; + linux,code = <KEY_WPS_BUTTON>; + gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>; + }; + + button-rfkill { + label = "WiFi"; + linux,code = <KEY_RFKILL>; + gpios = <&chipcommon 20 GPIO_ACTIVE_LOW>; + }; + }; +}; + +&usb3_phy { + status = "okay"; +}; diff --git a/dts/src/arm/broadcom/bcm47094-phicomm-k3.dts b/dts/src/arm/broadcom/bcm47094-phicomm-k3.dts new file mode 100644 index 0000000000..bb1bc4e61b --- /dev/null +++ b/dts/src/arm/broadcom/bcm47094-phicomm-k3.dts @@ -0,0 +1,70 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Copyright (C) 2017 Hamster Tian <haotia@gmail.com> + * Copyright (C) 2019 Hao Dong <halbertdong@gmail.com> + */ + +/dts-v1/; + +#include "bcm47094.dtsi" +#include "bcm5301x-nand-cs0-bch4.dtsi" + +/ { + compatible = "phicomm,k3", "brcm,bcm47094", "brcm,bcm4708"; + model = "Phicomm K3"; + + memory@0 { + device_type = "memory"; + reg = <0x00000000 0x08000000>, + <0x88000000 0x18000000>; + }; + + gpio-keys { + compatible = "gpio-keys"; + + button-restart { + label = "Reset"; + linux,code = <KEY_RESTART>; + gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>; + }; + }; +}; + +&uart1 { + status = "okay"; +}; + +&usb3_phy { + status = "okay"; +}; + +&nandcs { + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "boot"; + reg = <0x0000000 0x0080000>; + read-only; + }; + + partition@80000 { + label = "nvram"; + reg = <0x0080000 0x0100000>; + }; + + partition@180000 { + label = "phicomm"; + reg = <0x0180000 0x0280000>; + read-only; + }; + + partition@400000 { + label = "firmware"; + reg = <0x0400000 0x7C00000>; + compatible = "brcm,trx"; + }; + }; +}; diff --git a/dts/src/arm/broadcom/bcm47094.dtsi b/dts/src/arm/broadcom/bcm47094.dtsi new file mode 100644 index 0000000000..6282363313 --- /dev/null +++ b/dts/src/arm/broadcom/bcm47094.dtsi @@ -0,0 +1,31 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Copyright (C) 2016 RafaÅ‚ MiÅ‚ecki <rafal@milecki.pl> + */ + +#include "bcm4708.dtsi" + +/ { +}; + +&pinctrl { + compatible = "brcm,bcm4709-pinmux"; + + pinmux_mdio: mdio-pins { + groups = "mdio_grp"; + function = "mdio"; + }; +}; + +&usb3_phy { + compatible = "brcm,ns-bx-usb3-phy"; +}; + +&uart0 { + clock-frequency = <125000000>; + status = "okay"; +}; + +&srab { + compatible = "brcm,bcm53012-srab", "brcm,bcm5301x-srab"; +}; diff --git a/dts/src/arm/broadcom/bcm47189-luxul-xap-1440.dts b/dts/src/arm/broadcom/bcm47189-luxul-xap-1440.dts new file mode 100644 index 0000000000..ac44c745bd --- /dev/null +++ b/dts/src/arm/broadcom/bcm47189-luxul-xap-1440.dts @@ -0,0 +1,66 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Copyright 2017 Luxul Inc. + */ + +/dts-v1/; + +#include "bcm53573.dtsi" + +/ { + compatible = "luxul,xap-1440-v1", "brcm,bcm47189", "brcm,bcm53573"; + model = "Luxul XAP-1440 V1"; + + chosen { + bootargs = "earlycon"; + }; + + memory@0 { + device_type = "memory"; + reg = <0x00000000 0x08000000>; + }; + + leds { + compatible = "gpio-leds"; + + led-wlan { + label = "bcm53xx:blue:wlan"; + gpios = <&chipcommon 10 GPIO_ACTIVE_LOW>; + }; + + led-system { + label = "bcm53xx:green:system"; + gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>; + linux,default-trigger = "timer"; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + + button-restart { + label = "Reset"; + linux,code = <KEY_RESTART>; + gpios = <&chipcommon 7 GPIO_ACTIVE_LOW>; + }; + }; +}; + +&gmac0 { + phy-mode = "rgmii"; + phy-handle = <&bcm54210e>; + + /delete-node/ fixed-link; + + mdio { + /delete-node/ switch@1e; + + bcm54210e: ethernet-phy@0 { + reg = <0>; + }; + }; +}; + +&gmac1 { + status = "disabled"; +}; diff --git a/dts/src/arm/broadcom/bcm47189-luxul-xap-810.dts b/dts/src/arm/broadcom/bcm47189-luxul-xap-810.dts new file mode 100644 index 0000000000..fd071da26c --- /dev/null +++ b/dts/src/arm/broadcom/bcm47189-luxul-xap-810.dts @@ -0,0 +1,102 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Copyright 2017 Luxul Inc. + */ + +/dts-v1/; + +#include "bcm53573.dtsi" + +/ { + compatible = "luxul,xap-810-v1", "brcm,bcm47189", "brcm,bcm53573"; + model = "Luxul XAP-810 V1"; + + chosen { + bootargs = "earlycon"; + }; + + memory@0 { + device_type = "memory"; + reg = <0x00000000 0x08000000>; + }; + + leds-0 { + compatible = "gpio-leds"; + + led-5ghz { + label = "bcm53xx:blue:5ghz"; + gpios = <&chipcommon 11 GPIO_ACTIVE_HIGH>; + }; + + led-system { + label = "bcm53xx:green:system"; + gpios = <&chipcommon 15 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "timer"; + }; + }; + + leds-1 { + compatible = "gpio-leds"; + + led-2ghz { + label = "bcm53xx:blue:2ghz"; + gpios = <&pcie0_chipcommon 3 GPIO_ACTIVE_HIGH>; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + + button-restart { + label = "Reset"; + linux,code = <KEY_RESTART>; + gpios = <&chipcommon 7 GPIO_ACTIVE_LOW>; + }; + }; +}; + +&pcie0 { + ranges = <0x00000000 0 0 0 0 0x00100000>; + #address-cells = <3>; + #size-cells = <2>; + + bridge@0,0,0 { + reg = <0x0000 0 0 0 0>; + ranges = <0x00000000 0 0 0 0 0 0 0x00100000>; + #address-cells = <3>; + #size-cells = <2>; + + wifi@0,1,0 { + reg = <0x0000 0 0 0 0>; + ranges = <0x00000000 0 0 0 0x00100000>; + #address-cells = <1>; + #size-cells = <1>; + + pcie0_chipcommon: chipcommon@0 { + reg = <0 0x1000>; + + gpio-controller; + #gpio-cells = <2>; + }; + }; + }; +}; + +&gmac0 { + phy-mode = "rgmii"; + phy-handle = <&bcm54210e>; + + /delete-node/ fixed-link; + + mdio { + /delete-node/ switch@1e; + + bcm54210e: ethernet-phy@0 { + reg = <0>; + }; + }; +}; + +&gmac1 { + status = "disabled"; +}; diff --git a/dts/src/arm/broadcom/bcm47189-tenda-ac9.dts b/dts/src/arm/broadcom/bcm47189-tenda-ac9.dts new file mode 100644 index 0000000000..3ac6cac541 --- /dev/null +++ b/dts/src/arm/broadcom/bcm47189-tenda-ac9.dts @@ -0,0 +1,137 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Copyright (C) 2016 RafaÅ‚ MiÅ‚ecki <rafal@milecki.pl> + */ + +/dts-v1/; + +#include "bcm53573.dtsi" + +/ { + compatible = "tenda,ac9", "brcm,bcm47189", "brcm,bcm53573"; + model = "Tenda AC9"; + + chosen { + bootargs = "console=ttyS0,115200 earlycon"; + }; + + memory@0 { + device_type = "memory"; + reg = <0x00000000 0x08000000>; + }; + + leds-0 { + compatible = "gpio-leds"; + + led-usb { + label = "bcm53xx:blue:usb"; + gpios = <&chipcommon 1 GPIO_ACTIVE_HIGH>; + trigger-sources = <&ohci_port1>, <&ehci_port1>; + linux,default-trigger = "usbport"; + }; + + led-wps { + label = "bcm53xx:blue:wps"; + gpios = <&chipcommon 10 GPIO_ACTIVE_HIGH>; + }; + + led-5ghz { + label = "bcm53xx:blue:5ghz"; + gpios = <&chipcommon 11 GPIO_ACTIVE_HIGH>; + }; + + led-system { + label = "bcm53xx:blue:system"; + gpios = <&chipcommon 15 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "timer"; + }; + }; + + leds-1 { + compatible = "gpio-leds"; + + led-2ghz { + label = "bcm53xx:blue:2ghz"; + gpios = <&pcie0_chipcommon 3 GPIO_ACTIVE_HIGH>; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + + button-rfkill { + label = "WiFi"; + linux,code = <KEY_RFKILL>; + gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>; + }; + + button-restart { + label = "Reset"; + linux,code = <KEY_RESTART>; + gpios = <&chipcommon 7 GPIO_ACTIVE_LOW>; + }; + + button-wps { + label = "WPS"; + linux,code = <KEY_WPS_BUTTON>; + gpios = <&chipcommon 9 GPIO_ACTIVE_LOW>; + }; + }; +}; + +&pcie0 { + ranges = <0x00000000 0 0 0 0 0x00100000>; + #address-cells = <3>; + #size-cells = <2>; + + bridge@0,0,0 { + reg = <0x0000 0 0 0 0>; + ranges = <0x00000000 0 0 0 0 0 0 0x00100000>; + #address-cells = <3>; + #size-cells = <2>; + + wifi@0,1,0 { + reg = <0x0000 0 0 0 0>; + ranges = <0x00000000 0 0 0 0x00100000>; + #address-cells = <1>; + #size-cells = <1>; + + pcie0_chipcommon: chipcommon@0 { + reg = <0 0x1000>; + + gpio-controller; + #gpio-cells = <2>; + }; + }; + }; +}; + +&switch { + status = "okay"; + + ports { + port@0 { + label = "wan"; + }; + + port@1 { + label = "lan1"; + }; + + port@2 { + label = "lan2"; + }; + + port@3 { + label = "lan3"; + }; + + port@4 { + label = "lan4"; + }; + + port@8 { + label = "cpu"; + }; + }; +}; diff --git a/dts/src/arm/broadcom/bcm47622.dtsi b/dts/src/arm/broadcom/bcm47622.dtsi new file mode 100644 index 0000000000..485863f9c4 --- /dev/null +++ b/dts/src/arm/broadcom/bcm47622.dtsi @@ -0,0 +1,164 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright 2022 Broadcom Ltd. + */ + +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/interrupt-controller/irq.h> + +/ { + compatible = "brcm,bcm47622", "brcm,bcmbca"; + #address-cells = <1>; + #size-cells = <1>; + + interrupt-parent = <&gic>; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + CA7_0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a7"; + reg = <0x0>; + next-level-cache = <&L2_0>; + enable-method = "psci"; + }; + + CA7_1: cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a7"; + reg = <0x1>; + next-level-cache = <&L2_0>; + enable-method = "psci"; + }; + + CA7_2: cpu@2 { + device_type = "cpu"; + compatible = "arm,cortex-a7"; + reg = <0x2>; + next-level-cache = <&L2_0>; + enable-method = "psci"; + }; + + CA7_3: cpu@3 { + device_type = "cpu"; + compatible = "arm,cortex-a7"; + reg = <0x3>; + next-level-cache = <&L2_0>; + enable-method = "psci"; + }; + + L2_0: l2-cache0 { + compatible = "cache"; + cache-level = <2>; + cache-unified; + }; + }; + + timer { + compatible = "arm,armv7-timer"; + interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>; + arm,cpu-registers-not-fw-configured; + }; + + pmu: pmu { + compatible = "arm,cortex-a7-pmu"; + interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; + interrupt-affinity = <&CA7_0>, <&CA7_1>, + <&CA7_2>, <&CA7_3>; + }; + + clocks: clocks { + periph_clk: periph-clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <200000000>; + }; + + uart_clk: uart-clk { + compatible = "fixed-factor-clock"; + #clock-cells = <0>; + clocks = <&periph_clk>; + clock-div = <4>; + clock-mult = <1>; + }; + + hsspi_pll: hsspi-pll { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <200000000>; + }; + }; + + psci { + compatible = "arm,psci-0.2"; + method = "smc"; + }; + + axi@81000000 { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x81000000 0x8000>; + + gic: interrupt-controller@1000 { + compatible = "arm,cortex-a7-gic"; + #interrupt-cells = <3>; + interrupt-controller; + interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; + reg = <0x1000 0x1000>, + <0x2000 0x2000>, + <0x4000 0x2000>, + <0x6000 0x2000>; + }; + }; + + bus@ff800000 { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0xff800000 0x800000>; + + hsspi: spi@1000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "brcm,bcm47622-hsspi", "brcm,bcmbca-hsspi-v1.0"; + reg = <0x1000 0x600>; + interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&hsspi_pll &hsspi_pll>; + clock-names = "hsspi", "pll"; + num-cs = <8>; + status = "disabled"; + }; + + nand_controller: nand-controller@1800 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "brcm,nand-bcm63138", "brcm,brcmnand-v7.1", "brcm,brcmnand"; + reg = <0x1800 0x600>, <0x2000 0x10>; + reg-names = "nand", "nand-int-base"; + status = "disabled"; + + nandcs: nand@0 { + compatible = "brcm,nandcs"; + reg = <0>; + }; + }; + + uart0: serial@12000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0x12000 0x1000>; + interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&uart_clk>, <&uart_clk>; + clock-names = "uartclk", "apb_pclk"; + status = "disabled"; + }; + }; +}; diff --git a/dts/src/arm/broadcom/bcm53015-meraki-mr26.dts b/dts/src/arm/broadcom/bcm53015-meraki-mr26.dts new file mode 100644 index 0000000000..0bf5106f70 --- /dev/null +++ b/dts/src/arm/broadcom/bcm53015-meraki-mr26.dts @@ -0,0 +1,167 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Broadcom BCM470X / BCM5301X ARM platform code. + * DTS for Meraki MR26 / Codename: Venom + * + * Copyright (C) 2022 Christian Lamparter <chunkeey@gmail.com> + */ + +/dts-v1/; + +#include "bcm4708.dtsi" +#include "bcm5301x-nand-cs0-bch8.dtsi" +#include <dt-bindings/leds/common.h> + +/ { + compatible = "meraki,mr26", "brcm,bcm53015", "brcm,bcm4708"; + model = "Meraki MR26"; + + memory@0 { + reg = <0x00000000 0x08000000>; + device_type = "memory"; + }; + + leds { + compatible = "gpio-leds"; + + led-0 { + function = LED_FUNCTION_FAULT; + color = <LED_COLOR_ID_AMBER>; + gpios = <&chipcommon 13 GPIO_ACTIVE_HIGH>; + panic-indicator; + }; + led-1 { + function = LED_FUNCTION_INDICATOR; + color = <LED_COLOR_ID_WHITE>; + gpios = <&chipcommon 12 GPIO_ACTIVE_HIGH>; + }; + }; + + keys { + compatible = "gpio-keys"; + + key-restart { + label = "Reset"; + linux,code = <KEY_RESTART>; + gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>; + }; + }; +}; + +&uart0 { + clock-frequency = <50000000>; + /delete-property/ clocks; +}; + +&uart1 { + status = "disabled"; +}; + +&gmac0 { + status = "okay"; +}; + +&gmac1 { + status = "disabled"; +}; +&gmac2 { + status = "disabled"; +}; +&gmac3 { + status = "disabled"; +}; + +&nandcs { + partitions { + compatible = "fixed-partitions"; + #address-cells = <0x1>; + #size-cells = <0x1>; + + partition@0 { + label = "u-boot"; + reg = <0x0 0x200000>; + read-only; + }; + + partition@200000 { + label = "u-boot-env"; + reg = <0x200000 0x200000>; + /* empty */ + }; + + partition@400000 { + label = "u-boot-backup"; + reg = <0x400000 0x200000>; + /* empty */ + }; + + partition@600000 { + label = "u-boot-env-backup"; + reg = <0x600000 0x200000>; + /* empty */ + }; + + partition@800000 { + label = "ubi"; + reg = <0x800000 0x7780000>; + }; + }; +}; + +&srab { + status = "okay"; + + ports { + port@0 { + label = "poe"; + }; + + port@5 { + label = "cpu"; + + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + + port@7 { + status = "disabled"; + }; + + port@8 { + status = "disabled"; + }; + }; +}; + +&i2c0 { + status = "okay"; + + pinctrl-names = "default"; + pinctrl-0 = <&pinmux_i2c>; + + clock-frequency = <100000>; + + ina219@40 { + compatible = "ti,ina219"; /* PoE power */ + reg = <0x40>; + shunt-resistor = <60000>; /* = 60 mOhms */ + }; + + eeprom@56 { + compatible = "atmel,24c64"; + reg = <0x56>; + pagesize = <32>; + read-only; + #address-cells = <1>; + #size-cells = <1>; + + /* it's empty */ + }; +}; + +&thermal { + status = "disabled"; + /* does not work, reads 418 degree Celsius */ +}; diff --git a/dts/src/arm/broadcom/bcm53016-dlink-dwl-8610ap.dts b/dts/src/arm/broadcom/bcm53016-dlink-dwl-8610ap.dts new file mode 100644 index 0000000000..c1f5439174 --- /dev/null +++ b/dts/src/arm/broadcom/bcm53016-dlink-dwl-8610ap.dts @@ -0,0 +1,131 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/dts-v1/; + +#include "bcm4709.dtsi" +#include "bcm5301x-nand-cs0-bch8.dtsi" +#include <dt-bindings/leds/common.h> +#include <dt-bindings/input/input.h> + +/ { + model = "D-Link DWL-8610AP"; + compatible = "dlink,dwl-8610ap", "brcm,bcm53016", "brcm,bcm4708"; + + memory@0 { + device_type = "memory"; + /* 512 MB RAM in 2 x Macronix D9PSH chips */ + reg = <0x00000000 0x08000000>, + <0x88000000 0x08000000>; + }; + + leds { + compatible = "gpio-leds"; + + led-power { + function = LED_FUNCTION_POWER; + color = <LED_COLOR_ID_GREEN>; + gpios = <&chipcommon 0 GPIO_ACTIVE_LOW>; + default-state = "on"; + }; + + led-diag { + /* Actually "diag" unclear what this means */ + function = LED_FUNCTION_INDICATOR; + color = <LED_COLOR_ID_RED>; + gpios = <&chipcommon 1 GPIO_ACTIVE_LOW>; + default-state = "on"; + linux,default-trigger = "heartbeat"; + }; + + led-wlan-2g { + function = LED_FUNCTION_WLAN; + color = <LED_COLOR_ID_GREEN>; + gpios = <&chipcommon 5 GPIO_ACTIVE_LOW>; + }; + + led-wlan-5g { + function = LED_FUNCTION_WLAN; + color = <LED_COLOR_ID_GREEN>; + gpios = <&chipcommon 8 GPIO_ACTIVE_LOW>; + }; + }; + + gpio_keys { + compatible = "gpio-keys"; + + button-reset { + debounce-interval = <100>; + wakeup-source; + linux,code = <KEY_RESTART>; + label = "reset"; + /* This GPIO is actually stored in NVRAM, but it's not gonna change */ + gpios = <&chipcommon 4 GPIO_ACTIVE_LOW>; + }; + }; + + /* + * Flash memory at 0x1e000000-0x1fffffff + * Macronix 32 64KB blocks; total size 2MB, same that can be + * found attached to the spi_nor SPI controller. + */ + nvram@1e080000 { + compatible = "brcm,nvram"; + reg = <0x1e080000 0x00020000>; + + et0macaddr: et0macaddr { + }; + + et1macaddr: et1macaddr { + }; + }; +}; + +&gmac0 { + nvmem-cells = <&et0macaddr>; + nvmem-cell-names = "mac-address"; +}; + +&gmac1 { + nvmem-cells = <&et1macaddr>; + nvmem-cell-names = "mac-address"; +}; + +&spi_nor { + /* Serial SPI NOR Flash MX 25L1606E */ + status = "okay"; +}; + +&nandcs { + /* + * Spansion S34ML01G100TFI00 128 MB NAND Flash memory + * + * This ECC is a bit unorthodox but it is what the stock firmware + * is using, so to be able to mount the original partitions + * this is necessary. + */ + nand-ecc-strength = <5>; + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + /* This is named nflash1.trx in CFE */ + trx@0 { + label = "firmware"; + reg = <0x00000000 0x02800000>; + compatible = "brcm,trx"; + }; + + /* This is named nflash1.trx2 in CFE */ + trx2@2800000 { + label = "firmware2"; + reg = <0x02800000 0x02800000>; + compatible = "brcm,trx"; + }; + + /* This is named nflash1.rwfs in CFE */ + free@5000000 { + label = "free"; + reg = <0x05000000 0x03000000>; + }; + }; +}; diff --git a/dts/src/arm/broadcom/bcm53016-meraki-mr32.dts b/dts/src/arm/broadcom/bcm53016-meraki-mr32.dts new file mode 100644 index 0000000000..25eeacf6a2 --- /dev/null +++ b/dts/src/arm/broadcom/bcm53016-meraki-mr32.dts @@ -0,0 +1,225 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Broadcom BCM470X / BCM5301X ARM platform code. + * DTS for Meraki MR32 / Codename: Espresso + * + * Copyright (C) 2018-2020 Christian Lamparter <chunkeey@gmail.com> + */ + +/dts-v1/; + +#include "bcm4708.dtsi" +#include "bcm5301x-nand-cs0-bch8.dtsi" +#include <dt-bindings/leds/common.h> + +/ { + compatible = "meraki,mr32", "brcm,bcm53016", "brcm,bcm4708"; + model = "Meraki MR32"; + + chosen { + bootargs = " console=ttyS0,115200n8 earlycon"; + }; + + memory@0 { + reg = <0x00000000 0x08000000>; + device_type = "memory"; + }; + + aliases { + serial1 = &uart2; + }; + + leds { + compatible = "gpio-leds"; + + sysled3 { + function = LED_FUNCTION_FAULT; + color = <LED_COLOR_ID_AMBER>; + gpios = <&chipcommon 18 GPIO_ACTIVE_LOW>; + panic-indicator; + }; + sysled2 { + function = LED_FUNCTION_INDICATOR; + color = <LED_COLOR_ID_WHITE>; + gpios = <&chipcommon 19 GPIO_ACTIVE_HIGH>; + }; + }; + + keys { + compatible = "gpio-keys"; + + button-restart { + label = "Reset"; + linux,code = <KEY_RESTART>; + gpios = <&chipcommon 21 GPIO_ACTIVE_LOW>; + }; + }; + + pwm-leds { + compatible = "pwm-leds"; + + led-0 { + /* SYS-LED 1 - Tricolor */ + function = LED_FUNCTION_INDICATOR; + color = <LED_COLOR_ID_RED>; + pwms = <&pwm 0 50000 0>; + max-brightness = <255>; + }; + + led-1 { + /* SYS-LED 1 - Tricolor */ + function = LED_FUNCTION_POWER; + color = <LED_COLOR_ID_GREEN>; + pwms = <&pwm 1 50000 0>; + max-brightness = <255>; + }; + + led-2 { + /* SYS-LED 1 - Tricolor */ + function = LED_FUNCTION_INDICATOR; + color = <LED_COLOR_ID_BLUE>; + pwms = <&pwm 2 50000 0>; + max-brightness = <255>; + }; + }; +}; + +&uart0 { + clock-frequency = <62500000>; + /delete-property/ clocks; +}; + +&uart1 { + status = "disabled"; +}; + +&uart2 { + status = "okay"; + /* + * bluetooth-le { + * compatible = "brcm,bcm20732"; + * enable-gpios = <&chipcommon 20 GPIO_ACTIVE_HIGH>; + *}; + */ +}; + +&gmac0 { + nvmem-cell-names = "mac-address"; + nvmem-cells = <&mac_address>; +}; + +&gmac1 { + status = "disabled"; +}; +&gmac2 { + status = "disabled"; +}; +&gmac3 { + status = "disabled"; +}; + +&pwm { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinmux_pwm>; +}; + +&nandcs { + partitions { + /* + * The partition autodetection does not work for this device. + * It will only detect the "nvram" partition with an incorrect size. + * [ 1.721667] 1 bcm47xxpart partitions found on MTD device brcmnand.0 + * [ 1.727962] Creating 1 MTD partitions on "brcmnand.0": + * [ 1.733117] 0x000000400000-0x000008000000 : "nvram" + */ + + compatible = "fixed-partitions"; + #address-cells = <0x1>; + #size-cells = <0x1>; + + partition@0 { + label = "u-boot"; + reg = <0x0 0x100000>; + read-only; + }; + + partition@100000 { + label = "bootkernel1"; + reg = <0x100000 0x300000>; + read-only; + }; + + partition@400000 { + label = "nvram"; + reg = <0x400000 0x100000>; + read-only; + }; + + partition@500000 { + label = "bootkernel2"; + reg = <0x500000 0x300000>; + read-only; + }; + + partition@800000 { + label = "ubi"; + reg = <0x800000 0x7780000>; + }; + }; +}; + +&srab { + status = "okay"; + + ports { + port@0 { + label = "poe"; + }; + + port@5 { + label = "cpu"; + + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + + port@7 { + status = "disabled"; + }; + + port@8 { + status = "disabled"; + }; + }; +}; + +&i2c0 { + status = "okay"; + + pinctrl-names = "default"; + pinctrl-0 = <&pinmux_i2c>; + + clock-frequency = <100000>; + + current_sense: ina219@45 { + compatible = "ti,ina219"; + reg = <0x45>; + shunt-resistor = <60000>; /* = 60 mOhms */ + }; + + eeprom: eeprom@50 { + compatible = "atmel,24c64"; + reg = <0x50>; + pagesize = <32>; + read-only; + #address-cells = <1>; + #size-cells = <1>; + + mac_address: mac-address@66 { + reg = <0x66 0x6>; + }; + }; +}; diff --git a/dts/src/arm/broadcom/bcm5301x-nand-cs0-bch1.dtsi b/dts/src/arm/broadcom/bcm5301x-nand-cs0-bch1.dtsi new file mode 100644 index 0000000000..c349e8f0af --- /dev/null +++ b/dts/src/arm/broadcom/bcm5301x-nand-cs0-bch1.dtsi @@ -0,0 +1,14 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Broadcom Northstar NAND. + * + * Copyright (C) 2016 RafaÅ‚ MiÅ‚ecki <rafal.milecki@gmail.com> + */ + +#include "bcm5301x-nand-cs0.dtsi" + +&nandcs { + nand-ecc-algo = "bch"; + nand-ecc-strength = <1>; + nand-ecc-step-size = <512>; +}; diff --git a/dts/src/arm/broadcom/bcm5301x-nand-cs0-bch4.dtsi b/dts/src/arm/broadcom/bcm5301x-nand-cs0-bch4.dtsi new file mode 100644 index 0000000000..18e25e302b --- /dev/null +++ b/dts/src/arm/broadcom/bcm5301x-nand-cs0-bch4.dtsi @@ -0,0 +1,12 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Copyright 2016 Luxul Inc. + */ + +#include "bcm5301x-nand-cs0.dtsi" + +&nandcs { + nand-ecc-algo = "bch"; + nand-ecc-strength = <4>; + nand-ecc-step-size = <512>; +}; diff --git a/dts/src/arm/broadcom/bcm5301x-nand-cs0-bch8.dtsi b/dts/src/arm/broadcom/bcm5301x-nand-cs0-bch8.dtsi new file mode 100644 index 0000000000..c8e56d30bd --- /dev/null +++ b/dts/src/arm/broadcom/bcm5301x-nand-cs0-bch8.dtsi @@ -0,0 +1,17 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Broadcom BCM470X / BCM5301X Nand chip defaults. + * + * This should be included if the NAND controller is on chip select 0 + * and uses 8 bit ECC. + * + * Copyright (C) 2015 Hauke Mehrtens <hauke@hauke-m.de> + */ + +#include "bcm5301x-nand-cs0.dtsi" + +&nandcs { + nand-ecc-algo = "bch"; + nand-ecc-strength = <8>; + nand-ecc-step-size = <512>; +}; diff --git a/dts/src/arm/broadcom/bcm5301x-nand-cs0.dtsi b/dts/src/arm/broadcom/bcm5301x-nand-cs0.dtsi new file mode 100644 index 0000000000..be9a00ff75 --- /dev/null +++ b/dts/src/arm/broadcom/bcm5301x-nand-cs0.dtsi @@ -0,0 +1,21 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Broadcom Northstar NAND. + * + * Copyright (C) 2015 Hauke Mehrtens <hauke@hauke-m.de> + */ + +/ { + nand-controller@18028000 { + nandcs: nand@0 { + compatible = "brcm,nandcs"; + reg = <0>; + #address-cells = <1>; + #size-cells = <1>; + + partitions { + compatible = "brcm,bcm947xx-cfe-partitions"; + }; + }; + }; +}; diff --git a/dts/src/arm/broadcom/bcm5301x.dtsi b/dts/src/arm/broadcom/bcm5301x.dtsi new file mode 100644 index 0000000000..f06a178a92 --- /dev/null +++ b/dts/src/arm/broadcom/bcm5301x.dtsi @@ -0,0 +1,136 @@ +/* + * Broadcom BCM470X / BCM5301X ARM platform code. + * Generic DTS part for all BCM53010, BCM53011, BCM53012, BCM53014, BCM53015, + * BCM53016, BCM53017, BCM53018, BCM4707, BCM4708 and BCM4709 SoCs + * + * Licensed under the GNU/GPL. See COPYING for details. + */ + +#include "bcm-ns.dtsi" + +/ { + mpcore-bus@19000000 { + a9pll: arm_clk@0 { + #clock-cells = <0>; + compatible = "brcm,nsp-armpll"; + clocks = <&osc>; + reg = <0x00000 0x1000>; + }; + + watchdog@20620 { + compatible = "arm,cortex-a9-twd-wdt"; + reg = <0x20620 0x20>; + interrupts = <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | + IRQ_TYPE_EDGE_RISING)>; + clocks = <&periph_clk>; + }; + }; + + clocks { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + osc: oscillator { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <25000000>; + }; + + iprocmed: iprocmed { + #clock-cells = <0>; + compatible = "fixed-factor-clock"; + clocks = <&genpll BCM_NSP_GENPLL_IPROCFAST_CLK>; + clock-div = <2>; + clock-mult = <1>; + }; + + iprocslow: iprocslow { + #clock-cells = <0>; + compatible = "fixed-factor-clock"; + clocks = <&genpll BCM_NSP_GENPLL_IPROCFAST_CLK>; + clock-div = <4>; + clock-mult = <1>; + }; + + periph_clk: periph_clk { + #clock-cells = <0>; + compatible = "fixed-factor-clock"; + clocks = <&a9pll>; + clock-div = <2>; + clock-mult = <1>; + }; + }; + + i2c0: i2c@18009000 { + compatible = "brcm,iproc-i2c"; + reg = <0x18009000 0x50>; + interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + clock-frequency = <100000>; + status = "disabled"; + }; + + dmu-bus@1800c000 { + cru-bus@100 { + lcpll0: clock-controller@100 { + #clock-cells = <1>; + compatible = "brcm,nsp-lcpll0"; + reg = <0x100 0x14>; + clocks = <&osc>; + clock-output-names = "lcpll0", "pcie_phy", + "sdio", "ddr_phy"; + }; + + genpll: clock-controller@140 { + #clock-cells = <1>; + compatible = "brcm,nsp-genpll"; + reg = <0x140 0x24>; + clocks = <&osc>; + clock-output-names = "genpll", "phy", + "ethernetclk", + "usbclk", "iprocfast", + "sata1", "sata2"; + }; + }; + }; + + spi@18029200 { + compatible = "brcm,spi-nsp-qspi", "brcm,spi-bcm-qspi"; + reg = <0x18029200 0x184>, + <0x18029000 0x124>, + <0x1811b408 0x004>, + <0x180293a0 0x01c>; + reg-names = "mspi", "bspi", "intr_regs", "intr_status_reg"; + interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "mspi_done", + "mspi_halted", + "spi_lr_fullness_reached", + "spi_lr_session_aborted", + "spi_lr_impatient", + "spi_lr_session_done", + "spi_lr_overread"; + clocks = <&iprocmed>; + num-cs = <2>; + #address-cells = <1>; + #size-cells = <0>; + + spi_nor: flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <20000000>; + status = "disabled"; + + partitions { + compatible = "brcm,bcm947xx-cfe-partitions"; + }; + }; + }; +}; diff --git a/dts/src/arm/broadcom/bcm53340-ubnt-unifi-switch8.dts b/dts/src/arm/broadcom/bcm53340-ubnt-unifi-switch8.dts new file mode 100644 index 0000000000..975f854f65 --- /dev/null +++ b/dts/src/arm/broadcom/bcm53340-ubnt-unifi-switch8.dts @@ -0,0 +1,86 @@ +/* + * DTS for Unifi Switch 8 port + * + * Copyright (C) 2017 Florian Fainelli <f.fainelli@gmail.com> + * + * Licensed under the GNU/GPL. See COPYING for details. + */ + +/dts-v1/; + +#include "bcm-hr2.dtsi" + +/ { + compatible = "ubnt,unifi-switch8", "brcm,bcm53342", "brcm,hr2"; + model = "Ubiquiti UniFi Switch 8 (BCM53342)"; + + /* Hurricane 2 designs use the second UART */ + chosen { + bootargs = "console=ttyS1,115200 earlyprintk"; + }; + + memory@0 { + device_type = "memory"; + reg = <0x00000000 0x08000000>, + <0x68000000 0x08000000>; + }; +}; + +&uart1 { + status = "okay"; +}; + +&qspi { + status = "okay"; + bspi-sel = <0>; + + flash: flash@0 { + compatible = "m25p80"; + reg = <0>; + #address-cells = <1>; + #size-cells = <1>; + spi-max-frequency = <12500000>; + spi-cpol; + spi-cpha; + + partition@0 { + label = "u-boot"; + reg = <0x0 0xc0000>; + }; + + partition@c0000 { + label = "u-boot-env"; + reg = <0xc0000 0x10000>; + }; + + partition@d0000 { + label = "shmoo"; + reg = <0xd0000 0x10000>; + }; + + partition@e0000 { + label = "kernel0"; + reg = <0xe0000 0xf00000>; + }; + + partition@fe0000 { + label = "kernel1"; + reg = <0xfe0000 0xf10000>; + }; + + partition@1ef0000 { + label = "cfg"; + reg = <0x1ef0000 0x100000>; + }; + + partition@1ff0000 { + label = "EEPROM"; + reg = <0x1ff0000 0x10000>; + }; + }; +}; + +&pcie0 { + /* Attaches to the internal switch */ + status = "okay"; +}; diff --git a/dts/src/arm/broadcom/bcm53573.dtsi b/dts/src/arm/broadcom/bcm53573.dtsi new file mode 100644 index 0000000000..2df80740d1 --- /dev/null +++ b/dts/src/arm/broadcom/bcm53573.dtsi @@ -0,0 +1,266 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Copyright (C) 2016 RafaÅ‚ MiÅ‚ecki <rafal@milecki.pl> + */ + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> + +/ { + #address-cells = <1>; + #size-cells = <1>; + interrupt-parent = <&gic>; + + aliases { + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a7"; + reg = <0x0>; + }; + }; + + mpcore@18310000 { + compatible = "simple-bus"; + ranges = <0x00000000 0x18310000 0x00008000>; + #address-cells = <1>; + #size-cells = <1>; + + gic: interrupt-controller@1000 { + compatible = "arm,cortex-a7-gic"; + #interrupt-cells = <3>; + #address-cells = <0>; + interrupt-controller; + reg = <0x1000 0x1000>, + <0x2000 0x0100>; + }; + }; + + timer { + compatible = "arm,armv7-timer"; + interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>, + <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>, + <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>, + <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>; + }; + + clocks { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + alp: oscillator { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <40000000>; + }; + }; + + axi@18000000 { + compatible = "brcm,bus-axi"; + reg = <0x18000000 0x1000>; + ranges = <0x00000000 0x18000000 0x00100000>; + #address-cells = <1>; + #size-cells = <1>; + + #interrupt-cells = <1>; + interrupt-map-mask = <0x000fffff 0xffff>; + interrupt-map = + /* ChipCommon */ + <0x00000000 0 &gic GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>, + + /* IEEE 802.11 0 */ + <0x00001000 0 &gic GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>, + + /* PCIe Controller 0 */ + <0x00002000 0 &gic GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>, + <0x00002000 1 &gic GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>, + <0x00002000 2 &gic GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>, + <0x00002000 3 &gic GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>, + <0x00002000 4 &gic GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>, + <0x00002000 5 &gic GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>, + + /* USB 2.0 Controller */ + <0x00004000 0 &gic GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>, + + /* Ethernet Controller 0 */ + <0x00005000 0 &gic GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>, + + /* IEEE 802.11 1 */ + <0x0000a000 0 &gic GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>, + + /* Ethernet Controller 1 */ + <0x0000b000 0 &gic GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>; + + chipcommon: chipcommon@0 { + compatible = "simple-bus"; + reg = <0x00000000 0x1000>; + ranges; + + #address-cells = <1>; + #size-cells = <1>; + + gpio-controller; + #gpio-cells = <2>; + + uart0: serial@300 { + compatible = "ns16550a"; + reg = <0x0300 0x100>; + interrupt-parent = <&gic>; + interrupts = <GIC_PPI 16 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&alp>; + status = "okay"; + }; + }; + + pcie0: pcie@2000 { + reg = <0x00002000 0x1000>; + + #address-cells = <3>; + #size-cells = <2>; + }; + + usb2: usb2@4000 { + reg = <0x4000 0x1000>; + ranges; + #address-cells = <1>; + #size-cells = <1>; + + ehci: usb@4000 { + compatible = "generic-ehci"; + reg = <0x4000 0x1000>; + interrupt-parent = <&gic>; + interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>; + + #address-cells = <1>; + #size-cells = <0>; + + ehci_port1: port@1 { + reg = <1>; + #trigger-source-cells = <0>; + }; + + ehci_port2: port@2 { + reg = <2>; + #trigger-source-cells = <0>; + }; + }; + + ohci: usb@d000 { + compatible = "generic-ohci"; + reg = <0xd000 0x1000>; + interrupt-parent = <&gic>; + interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>; + + #address-cells = <1>; + #size-cells = <0>; + + ohci_port1: port@1 { + reg = <1>; + #trigger-source-cells = <0>; + }; + + ohci_port2: port@2 { + reg = <2>; + #trigger-source-cells = <0>; + }; + }; + }; + + gmac0: ethernet@5000 { + reg = <0x5000 0x1000>; + phy-mode = "internal"; + + fixed-link { + speed = <1000>; + full-duplex; + }; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + switch: switch@1e { + compatible = "brcm,bcm53125"; + reg = <0x1e>; + + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + }; + + port@1 { + reg = <1>; + }; + + port@2 { + reg = <2>; + }; + + port@3 { + reg = <3>; + }; + + port@4 { + reg = <4>; + }; + + port@5 { + reg = <5>; + ethernet = <&gmac1>; + + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + + port@8 { + reg = <8>; + ethernet = <&gmac0>; + }; + }; + }; + }; + }; + + gmac1: ethernet@b000 { + reg = <0xb000 0x1000>; + phy-mode = "internal"; + + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + + pmu@12000 { + compatible = "simple-mfd", "syscon"; + reg = <0x00012000 0x00001000>; + + ilp: ilp { + compatible = "brcm,bcm53573-ilp"; + clocks = <&alp>; + #clock-cells = <0>; + clock-output-names = "ilp"; + }; + }; + }; +}; diff --git a/dts/src/arm/broadcom/bcm59056.dtsi b/dts/src/arm/broadcom/bcm59056.dtsi new file mode 100644 index 0000000000..a9bb7ad813 --- /dev/null +++ b/dts/src/arm/broadcom/bcm59056.dtsi @@ -0,0 +1,91 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* +* Copyright 2014 Linaro Limited +* Author: Matt Porter <mporter@linaro.org> +*/ + +&pmu { + compatible = "brcm,bcm59056"; + regulators { + rfldo_reg: rfldo { + }; + + camldo1_reg: camldo1 { + }; + + camldo2_reg: camldo2 { + }; + + simldo1_reg: simldo1 { + }; + + simldo2_reg: simldo2 { + }; + + sdldo_reg: sdldo { + }; + + sdxldo_reg: sdxldo { + }; + + mmcldo1_reg: mmcldo1 { + }; + + mmcldo2_reg: mmcldo2 { + }; + + audldo_reg: audldo { + }; + + micldo_reg: micldo { + }; + + usbldo_reg: usbldo { + }; + + vibldo_reg: vibldo { + }; + + csr_reg: csr { + }; + + iosr1_reg: iosr1 { + }; + + iosr2_reg: iosr2 { + }; + + msr_reg: msr { + }; + + sdsr1_reg: sdsr1 { + }; + + sdsr2_reg: sdsr2 { + }; + + vsr_reg: vsr { + }; + + gpldo1_reg: gpldo1 { + }; + + gpldo2_reg: gpldo2 { + }; + + gpldo3_reg: gpldo3 { + }; + + gpldo4_reg: gpldo4 { + }; + + gpldo5_reg: gpldo5 { + }; + + gpldo6_reg: gpldo6 { + }; + + vbus_reg: vbus { + }; + }; +}; diff --git a/dts/src/arm/broadcom/bcm63138.dtsi b/dts/src/arm/broadcom/bcm63138.dtsi new file mode 100644 index 0000000000..e74ba6bf37 --- /dev/null +++ b/dts/src/arm/broadcom/bcm63138.dtsi @@ -0,0 +1,258 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Broadcom BCM63138 DSL SoCs Device Tree + */ + +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/interrupt-controller/irq.h> + +/ { + #address-cells = <1>; + #size-cells = <1>; + compatible = "brcm,bcm63138", "brcm,bcmbca"; + model = "Broadcom BCM963138 Reference Board"; + interrupt-parent = <&gic>; + + aliases { + uart0 = &serial0; + uart1 = &serial1; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a9"; + next-level-cache = <&L2>; + reg = <0>; + enable-method = "brcm,bcm63138"; + }; + + cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a9"; + next-level-cache = <&L2>; + reg = <1>; + enable-method = "brcm,bcm63138"; + resets = <&pmb0 4 1>; + }; + }; + + clocks { + /* UBUS peripheral clock */ + periph_clk: periph_clk { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <50000000>; + clock-output-names = "periph"; + }; + + /* peripheral clock for system timer */ + axi_clk: axi_clk { + #clock-cells = <0>; + compatible = "fixed-factor-clock"; + clocks = <&armpll>; + clock-div = <2>; + clock-mult = <1>; + }; + + /* APB bus clock */ + apb_clk: apb_clk { + #clock-cells = <0>; + compatible = "fixed-factor-clock"; + clocks = <&armpll>; + clock-div = <4>; + clock-mult = <1>; + }; + + hsspi_pll: hsspi-pll { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <400000000>; + }; + }; + + /* ARM bus */ + axi@80000000 { + compatible = "simple-bus"; + ranges = <0 0x80000000 0x784000>; + #address-cells = <1>; + #size-cells = <1>; + + L2: cache-controller@1d000 { + compatible = "arm,pl310-cache"; + reg = <0x1d000 0x1000>; + cache-unified; + cache-level = <2>; + cache-size = <524288>; + cache-sets = <1024>; + cache-line-size = <32>; + interrupts = <GIC_PPI 0 IRQ_TYPE_LEVEL_HIGH>; + }; + + scu: scu@1e000 { + compatible = "arm,cortex-a9-scu"; + reg = <0x1e000 0x100>; + }; + + gic: interrupt-controller@1f000 { + compatible = "arm,cortex-a9-gic"; + reg = <0x1f000 0x1000 + 0x1e100 0x100>; + #interrupt-cells = <3>; + #address-cells = <0>; + interrupt-controller; + }; + + global_timer: timer@1e200 { + compatible = "arm,cortex-a9-global-timer"; + reg = <0x1e200 0x20>; + interrupts = <GIC_PPI 11 IRQ_TYPE_EDGE_RISING>; + clocks = <&axi_clk>; + }; + + local_timer: local-timer@1e600 { + compatible = "arm,cortex-a9-twd-timer"; + reg = <0x1e600 0x20>; + interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | + IRQ_TYPE_EDGE_RISING)>; + clocks = <&axi_clk>; + }; + + twd_watchdog: watchdog@1e620 { + compatible = "arm,cortex-a9-twd-wdt"; + reg = <0x1e620 0x20>; + interrupts = <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | + IRQ_TYPE_LEVEL_HIGH)>; + }; + + armpll: armpll@20000 { + #clock-cells = <0>; + compatible = "brcm,bcm63138-armpll"; + clocks = <&periph_clk>; + reg = <0x20000 0xf00>; + }; + + pmb0: reset-controller@4800c0 { + compatible = "brcm,bcm63138-pmb"; + reg = <0x4800c0 0x10>; + #reset-cells = <2>; + }; + + pmb1: reset-controller@4800e0 { + compatible = "brcm,bcm63138-pmb"; + reg = <0x4800e0 0x10>; + #reset-cells = <2>; + }; + + ahci: sata@a000 { + compatible = "brcm,bcm63138-ahci", "brcm,sata3-ahci"; + reg-names = "ahci", "top-ctrl"; + reg = <0xa000 0x9ac>, <0x8040 0x24>; + interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + resets = <&pmb0 3 1>; + reset-names = "ahci"; + status = "disabled"; + + sata0: sata-port@0 { + reg = <0>; + phys = <&sata_phy0>; + }; + }; + + sata_phy: sata-phy@8100 { + compatible = "brcm,bcm63138-sata-phy", "brcm,phy-sata3"; + reg = <0x8100 0x1e00>; + reg-names = "phy"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + + sata_phy0: sata-phy@0 { + reg = <0>; + #phy-cells = <0>; + }; + }; + }; + + /* Legacy UBUS base */ + ubus@fffe8000 { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0xfffe8000 0x8100>; + + timer: timer@80 { + compatible = "brcm,bcm6328-timer", "syscon"; + reg = <0x80 0x3c>; + }; + + serial0: serial@600 { + compatible = "brcm,bcm6345-uart"; + reg = <0x600 0x1b>; + interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&periph_clk>; + clock-names = "periph"; + status = "disabled"; + }; + + serial1: serial@620 { + compatible = "brcm,bcm6345-uart"; + reg = <0x620 0x1b>; + interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&periph_clk>; + clock-names = "periph"; + status = "disabled"; + }; + + hsspi: spi@1000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "brcm,bcm63138-hsspi", "brcm,bcmbca-hsspi-v1.0"; + reg = <0x1000 0x600>; + interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&hsspi_pll &hsspi_pll>; + clock-names = "hsspi", "pll"; + num-cs = <8>; + status = "disabled"; + }; + + nand_controller: nand-controller@2000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "brcm,nand-bcm63138", "brcm,brcmnand-v7.0", "brcm,brcmnand"; + reg = <0x2000 0x600>, <0xf0 0x10>; + reg-names = "nand", "nand-int-base"; + status = "disabled"; + interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "nand_ctlrdy"; + + nandcs: nand@0 { + compatible = "brcm,nandcs"; + reg = <0>; + }; + }; + + serial@4400 { + compatible = "brcm,bcm63138-hs-uart", "brcm,bcmbca-hs-uart"; + reg = <0x4400 0x1e0>; + interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>; + }; + + bootlut: bootlut@8000 { + compatible = "brcm,bcm63138-bootlut"; + reg = <0x8000 0x50>; + }; + + reboot { + compatible = "syscon-reboot"; + regmap = <&timer>; + offset = <0x34>; + mask = <1>; + }; + }; +}; diff --git a/dts/src/arm/broadcom/bcm63148.dtsi b/dts/src/arm/broadcom/bcm63148.dtsi new file mode 100644 index 0000000000..53703827ee --- /dev/null +++ b/dts/src/arm/broadcom/bcm63148.dtsi @@ -0,0 +1,137 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright 2022 Broadcom Ltd. + */ + +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/interrupt-controller/irq.h> + +/ { + compatible = "brcm,bcm63148", "brcm,bcmbca"; + #address-cells = <1>; + #size-cells = <1>; + + interrupt-parent = <&gic>; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + B15_0: cpu@0 { + device_type = "cpu"; + compatible = "brcm,brahma-b15"; + reg = <0x0>; + next-level-cache = <&L2_0>; + enable-method = "psci"; + }; + + B15_1: cpu@1 { + device_type = "cpu"; + compatible = "brcm,brahma-b15"; + reg = <0x1>; + next-level-cache = <&L2_0>; + enable-method = "psci"; + }; + + L2_0: l2-cache0 { + compatible = "cache"; + cache-level = <2>; + cache-unified; + }; + }; + + timer { + compatible = "arm,armv7-timer"; + interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>; + }; + + pmu: pmu { + compatible = "arm,cortex-a15-pmu"; + interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>; + interrupt-affinity = <&B15_0>, <&B15_1>; + }; + + clocks: clocks { + periph_clk: periph-clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <50000000>; + }; + + hsspi_pll: hsspi-pll { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <400000000>; + }; + }; + + psci { + compatible = "arm,psci-0.2"; + method = "smc"; + }; + + axi@80030000 { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x80030000 0x8000>; + + gic: interrupt-controller@1000 { + compatible = "arm,cortex-a15-gic"; + #interrupt-cells = <3>; + interrupt-controller; + reg = <0x1000 0x1000>, + <0x2000 0x2000>, + <0x4000 0x2000>, + <0x6000 0x2000>; + interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(2) | + IRQ_TYPE_LEVEL_HIGH)>; + }; + }; + + bus@ff800000 { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0xfffe8000 0x8000>; + + uart0: serial@600 { + compatible = "brcm,bcm6345-uart"; + reg = <0x600 0x20>; + interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&periph_clk>; + clock-names = "refclk"; + status = "disabled"; + }; + + hsspi: spi@1000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "brcm,bcm63148-hsspi", "brcm,bcmbca-hsspi-v1.0"; + reg = <0x1000 0x600>; + interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&hsspi_pll &hsspi_pll>; + clock-names = "hsspi", "pll"; + num-cs = <8>; + status = "disabled"; + }; + + nand_controller: nand-controller@2000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "brcm,nand-bcm63138", "brcm,brcmnand-v7.1", "brcm,brcmnand"; + reg = <0x2000 0x600>, <0xf0 0x10>; + reg-names = "nand", "nand-int-base"; + status = "disabled"; + + nandcs: nand@0 { + compatible = "brcm,nandcs"; + reg = <0>; + }; + }; + }; +}; diff --git a/dts/src/arm/broadcom/bcm63178.dtsi b/dts/src/arm/broadcom/bcm63178.dtsi new file mode 100644 index 0000000000..6d8d334989 --- /dev/null +++ b/dts/src/arm/broadcom/bcm63178.dtsi @@ -0,0 +1,155 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright 2022 Broadcom Ltd. + */ + +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/interrupt-controller/irq.h> + +/ { + compatible = "brcm,bcm63178", "brcm,bcmbca"; + #address-cells = <1>; + #size-cells = <1>; + + interrupt-parent = <&gic>; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + CA7_0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a7"; + reg = <0x0>; + next-level-cache = <&L2_0>; + enable-method = "psci"; + }; + + CA7_1: cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a7"; + reg = <0x1>; + next-level-cache = <&L2_0>; + enable-method = "psci"; + }; + + CA7_2: cpu@2 { + device_type = "cpu"; + compatible = "arm,cortex-a7"; + reg = <0x2>; + next-level-cache = <&L2_0>; + enable-method = "psci"; + }; + + L2_0: l2-cache0 { + compatible = "cache"; + cache-level = <2>; + cache-unified; + }; + }; + + timer { + compatible = "arm,armv7-timer"; + interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(3) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(3) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(3) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(3) | IRQ_TYPE_LEVEL_LOW)>; + arm,cpu-registers-not-fw-configured; + }; + + pmu: pmu { + compatible = "arm,cortex-a7-pmu"; + interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>; + interrupt-affinity = <&CA7_0>, <&CA7_1>, + <&CA7_2>; + }; + + clocks: clocks { + periph_clk: periph-clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <200000000>; + }; + + uart_clk: uart-clk { + compatible = "fixed-factor-clock"; + #clock-cells = <0>; + clocks = <&periph_clk>; + clock-div = <4>; + clock-mult = <1>; + }; + + hsspi_pll: hsspi-pll { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <200000000>; + }; + }; + + psci { + compatible = "arm,psci-0.2"; + method = "smc"; + }; + + axi@81000000 { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x81000000 0x8000>; + + gic: interrupt-controller@1000 { + compatible = "arm,cortex-a7-gic"; + #interrupt-cells = <3>; + interrupt-controller; + interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(3) | IRQ_TYPE_LEVEL_HIGH)>; + reg = <0x1000 0x1000>, + <0x2000 0x2000>, + <0x4000 0x2000>, + <0x6000 0x2000>; + }; + }; + + bus@ff800000 { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0xff800000 0x800000>; + + hsspi: spi@1000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "brcm,bcm63178-hsspi", "brcm,bcmbca-hsspi-v1.0"; + reg = <0x1000 0x600>; + interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&hsspi_pll &hsspi_pll>; + clock-names = "hsspi", "pll"; + num-cs = <8>; + status = "disabled"; + }; + + nand_controller: nand-controller@1800 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "brcm,nand-bcm63138", "brcm,brcmnand-v7.1", "brcm,brcmnand"; + reg = <0x1800 0x600>, <0x2000 0x10>; + reg-names = "nand", "nand-int-base"; + status = "disabled"; + + nandcs: nand@0 { + compatible = "brcm,nandcs"; + reg = <0>; + }; + }; + + uart0: serial@12000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0x12000 0x1000>; + interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&uart_clk>, <&uart_clk>; + clock-names = "uartclk", "apb_pclk"; + status = "disabled"; + }; + }; +}; diff --git a/dts/src/arm/broadcom/bcm6756.dtsi b/dts/src/arm/broadcom/bcm6756.dtsi new file mode 100644 index 0000000000..6433f8fa5e --- /dev/null +++ b/dts/src/arm/broadcom/bcm6756.dtsi @@ -0,0 +1,165 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright 2022 Broadcom Ltd. + */ + +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/interrupt-controller/irq.h> + +/ { + compatible = "brcm,bcm6756", "brcm,bcmbca"; + #address-cells = <1>; + #size-cells = <1>; + + interrupt-parent = <&gic>; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + CA7_0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a7"; + reg = <0x0>; + next-level-cache = <&L2_0>; + enable-method = "psci"; + }; + + CA7_1: cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a7"; + reg = <0x1>; + next-level-cache = <&L2_0>; + enable-method = "psci"; + }; + + CA7_2: cpu@2 { + device_type = "cpu"; + compatible = "arm,cortex-a7"; + reg = <0x2>; + next-level-cache = <&L2_0>; + enable-method = "psci"; + }; + + CA7_3: cpu@3 { + device_type = "cpu"; + compatible = "arm,cortex-a7"; + reg = <0x3>; + next-level-cache = <&L2_0>; + enable-method = "psci"; + }; + + L2_0: l2-cache0 { + compatible = "cache"; + cache-level = <2>; + cache-unified; + }; + }; + + timer { + compatible = "arm,armv7-timer"; + interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>; + arm,cpu-registers-not-fw-configured; + }; + + pmu: pmu { + compatible = "arm,cortex-a7-pmu"; + interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; + interrupt-affinity = <&CA7_0>, <&CA7_1>, + <&CA7_2>, <&CA7_3>; + }; + + clocks: clocks { + periph_clk: periph-clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <200000000>; + }; + + uart_clk: uart-clk { + compatible = "fixed-factor-clock"; + #clock-cells = <0>; + clocks = <&periph_clk>; + clock-div = <4>; + clock-mult = <1>; + }; + + hsspi_pll: hsspi-pll { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <200000000>; + }; + }; + + psci { + compatible = "arm,psci-0.2"; + method = "smc"; + }; + + axi@81000000 { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x81000000 0x8000>; + + gic: interrupt-controller@1000 { + compatible = "arm,cortex-a7-gic"; + #interrupt-cells = <3>; + interrupt-controller; + interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; + reg = <0x1000 0x1000>, + <0x2000 0x2000>, + <0x4000 0x2000>, + <0x6000 0x2000>; + }; + }; + + bus@ff800000 { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0xff800000 0x800000>; + + hsspi: spi@1000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "brcm,bcm6756-hsspi", "brcm,bcmbca-hsspi-v1.1"; + reg = <0x1000 0x600>, <0x2610 0x4>; + reg-names = "hsspi", "spim-ctrl"; + interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&hsspi_pll &hsspi_pll>; + clock-names = "hsspi", "pll"; + num-cs = <8>; + status = "disabled"; + }; + + nand_controller: nand-controller@1800 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "brcm,nand-bcm63138", "brcm,brcmnand-v7.1", "brcm,brcmnand"; + reg = <0x1800 0x600>, <0x2000 0x10>; + reg-names = "nand", "nand-int-base"; + status = "disabled"; + + nandcs: nand@0 { + compatible = "brcm,nandcs"; + reg = <0>; + }; + }; + + uart0: serial@12000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0x12000 0x1000>; + interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&uart_clk>, <&uart_clk>; + clock-names = "uartclk", "apb_pclk"; + status = "disabled"; + }; + }; +}; diff --git a/dts/src/arm/broadcom/bcm6846.dtsi b/dts/src/arm/broadcom/bcm6846.dtsi new file mode 100644 index 0000000000..ee361cb00b --- /dev/null +++ b/dts/src/arm/broadcom/bcm6846.dtsi @@ -0,0 +1,137 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright 2022 Broadcom Ltd. + */ + +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/interrupt-controller/irq.h> + +/ { + compatible = "brcm,bcm6846", "brcm,bcmbca"; + #address-cells = <1>; + #size-cells = <1>; + + interrupt-parent = <&gic>; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + CA7_0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a7"; + reg = <0x0>; + next-level-cache = <&L2_0>; + enable-method = "psci"; + }; + + CA7_1: cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a7"; + reg = <0x1>; + next-level-cache = <&L2_0>; + enable-method = "psci"; + }; + + L2_0: l2-cache0 { + compatible = "cache"; + cache-level = <2>; + cache-unified; + }; + }; + + timer { + compatible = "arm,armv7-timer"; + interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>; + arm,cpu-registers-not-fw-configured; + }; + + pmu: pmu { + compatible = "arm,cortex-a7-pmu"; + interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; + interrupt-affinity = <&CA7_0>, <&CA7_1>; + }; + + clocks: clocks { + periph_clk: periph-clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <200000000>; + }; + + hsspi_pll: hsspi-pll { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <400000000>; + }; + }; + + psci { + compatible = "arm,psci-0.2"; + method = "smc"; + }; + + axi@81000000 { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x81000000 0x8000>; + + gic: interrupt-controller@1000 { + compatible = "arm,cortex-a7-gic"; + #interrupt-cells = <3>; + interrupt-controller; + interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>; + reg = <0x1000 0x1000>, + <0x2000 0x2000>, + <0x4000 0x2000>, + <0x6000 0x2000>; + }; + }; + + bus@ff800000 { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0xff800000 0x800000>; + + uart0: serial@640 { + compatible = "brcm,bcm6345-uart"; + reg = <0x640 0x1b>; + interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&periph_clk>; + clock-names = "refclk"; + status = "disabled"; + }; + + hsspi: spi@1000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "brcm,bcm6846-hsspi", "brcm,bcmbca-hsspi-v1.0"; + reg = <0x1000 0x600>; + interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&hsspi_pll &hsspi_pll>; + clock-names = "hsspi", "pll"; + num-cs = <8>; + status = "disabled"; + }; + + nand_controller: nand-controller@1800 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "brcm,nand-bcm63138", "brcm,brcmnand-v7.1", "brcm,brcmnand"; + reg = <0x1800 0x600>, <0x2000 0x10>; + reg-names = "nand", "nand-int-base"; + status = "disabled"; + + nandcs: nand@0 { + compatible = "brcm,nandcs"; + reg = <0>; + }; + }; + }; +}; diff --git a/dts/src/arm/broadcom/bcm6855.dtsi b/dts/src/arm/broadcom/bcm6855.dtsi new file mode 100644 index 0000000000..52915ec6f3 --- /dev/null +++ b/dts/src/arm/broadcom/bcm6855.dtsi @@ -0,0 +1,155 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright 2022 Broadcom Ltd. + */ + +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/interrupt-controller/irq.h> + +/ { + compatible = "brcm,bcm6855", "brcm,bcmbca"; + #address-cells = <1>; + #size-cells = <1>; + + interrupt-parent = <&gic>; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + CA7_0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a7"; + reg = <0x0>; + next-level-cache = <&L2_0>; + enable-method = "psci"; + }; + + CA7_1: cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a7"; + reg = <0x1>; + next-level-cache = <&L2_0>; + enable-method = "psci"; + }; + + CA7_2: cpu@2 { + device_type = "cpu"; + compatible = "arm,cortex-a7"; + reg = <0x2>; + next-level-cache = <&L2_0>; + enable-method = "psci"; + }; + + L2_0: l2-cache0 { + compatible = "cache"; + cache-level = <2>; + cache-unified; + }; + }; + + timer { + compatible = "arm,armv7-timer"; + interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(3) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(3) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(3) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(3) | IRQ_TYPE_LEVEL_LOW)>; + arm,cpu-registers-not-fw-configured; + }; + + pmu: pmu { + compatible = "arm,cortex-a7-pmu"; + interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>; + interrupt-affinity = <&CA7_0>, <&CA7_1>, <&CA7_2>; + }; + + clocks: clocks { + periph_clk: periph-clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <200000000>; + }; + + uart_clk: uart-clk { + compatible = "fixed-factor-clock"; + #clock-cells = <0>; + clocks = <&periph_clk>; + clock-div = <4>; + clock-mult = <1>; + }; + + hsspi_pll: hsspi-pll { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <200000000>; + }; + }; + + psci { + compatible = "arm,psci-0.2"; + method = "smc"; + }; + + axi@81000000 { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x81000000 0x8000>; + + gic: interrupt-controller@1000 { + compatible = "arm,cortex-a7-gic"; + #interrupt-cells = <3>; + interrupt-controller; + interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(3) | IRQ_TYPE_LEVEL_HIGH)>; + reg = <0x1000 0x1000>, + <0x2000 0x2000>, + <0x4000 0x2000>, + <0x6000 0x2000>; + }; + }; + + bus@ff800000 { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0xff800000 0x800000>; + + hsspi: spi@1000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "brcm,bcm6855-hsspi", "brcm,bcmbca-hsspi-v1.1"; + reg = <0x1000 0x600>, <0x2610 0x4>; + reg-names = "hsspi", "spim-ctrl"; + interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&hsspi_pll &hsspi_pll>; + clock-names = "hsspi", "pll"; + num-cs = <8>; + status = "disabled"; + }; + + nand_controller: nand-controller@1800 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "brcm,nand-bcm63138", "brcm,brcmnand-v7.1", "brcm,brcmnand"; + reg = <0x1800 0x600>, <0x2000 0x10>; + reg-names = "nand", "nand-int-base"; + status = "disabled"; + + nandcs: nand@0 { + compatible = "brcm,nandcs"; + reg = <0>; + }; + }; + + uart0: serial@12000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0x12000 0x1000>; + interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&uart_clk>, <&uart_clk>; + clock-names = "uartclk", "apb_pclk"; + status = "disabled"; + }; + }; +}; diff --git a/dts/src/arm/broadcom/bcm6878.dtsi b/dts/src/arm/broadcom/bcm6878.dtsi new file mode 100644 index 0000000000..70cf23a65f --- /dev/null +++ b/dts/src/arm/broadcom/bcm6878.dtsi @@ -0,0 +1,146 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright 2022 Broadcom Ltd. + */ + +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/interrupt-controller/irq.h> + +/ { + compatible = "brcm,bcm6878", "brcm,bcmbca"; + #address-cells = <1>; + #size-cells = <1>; + + interrupt-parent = <&gic>; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + CA7_0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a7"; + reg = <0x0>; + next-level-cache = <&L2_0>; + enable-method = "psci"; + }; + + CA7_1: cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a7"; + reg = <0x1>; + next-level-cache = <&L2_0>; + enable-method = "psci"; + }; + + L2_0: l2-cache0 { + compatible = "cache"; + cache-level = <2>; + cache-unified; + }; + }; + + timer { + compatible = "arm,armv7-timer"; + interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>; + arm,cpu-registers-not-fw-configured; + }; + + pmu: pmu { + compatible = "arm,cortex-a7-pmu"; + interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; + interrupt-affinity = <&CA7_0>, <&CA7_1>; + }; + + clocks: clocks { + periph_clk: periph-clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <200000000>; + }; + + uart_clk: uart-clk { + compatible = "fixed-factor-clock"; + #clock-cells = <0>; + clocks = <&periph_clk>; + clock-div = <4>; + clock-mult = <1>; + }; + + hsspi_pll: hsspi-pll { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <200000000>; + }; + }; + + psci { + compatible = "arm,psci-0.2"; + method = "smc"; + }; + + axi@81000000 { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x81000000 0x8000>; + + gic: interrupt-controller@1000 { + compatible = "arm,cortex-a7-gic"; + #interrupt-cells = <3>; + interrupt-controller; + reg = <0x1000 0x1000>, + <0x2000 0x2000>, + <0x4000 0x2000>, + <0x6000 0x2000>; + interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(2) | + IRQ_TYPE_LEVEL_HIGH)>; + }; + }; + + bus@ff800000 { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0xff800000 0x800000>; + + hsspi: spi@1000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "brcm,bcm6878-hsspi", "brcm,bcmbca-hsspi-v1.0"; + reg = <0x1000 0x600>; + interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&hsspi_pll &hsspi_pll>; + clock-names = "hsspi", "pll"; + num-cs = <8>; + status = "disabled"; + }; + + nand_controller: nand-controller@1800 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "brcm,nand-bcm63138", "brcm,brcmnand-v7.1", "brcm,brcmnand"; + reg = <0x1800 0x600>, <0x2000 0x10>; + reg-names = "nand", "nand-int-base"; + status = "disabled"; + + nandcs: nand@0 { + compatible = "brcm,nandcs"; + reg = <0>; + }; + }; + + uart0: serial@12000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0x12000 0x1000>; + interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&uart_clk>, <&uart_clk>; + clock-names = "uartclk", "apb_pclk"; + status = "disabled"; + }; + }; +}; diff --git a/dts/src/arm/broadcom/bcm7445-bcm97445svmb.dts b/dts/src/arm/broadcom/bcm7445-bcm97445svmb.dts new file mode 100644 index 0000000000..f92d2cf859 --- /dev/null +++ b/dts/src/arm/broadcom/bcm7445-bcm97445svmb.dts @@ -0,0 +1,38 @@ +// SPDX-License-Identifier: GPL-2.0 +/dts-v1/; +#include "bcm7445.dtsi" + +/ { + model = "Broadcom STB (bcm7445), SVMB reference board"; + compatible = "brcm,bcm7445", "brcm,brcmstb"; + + memory@0 { + device_type = "memory"; + reg = <0x00 0x00000000 0x00 0x40000000>, + <0x00 0x40000000 0x00 0x40000000>, + <0x00 0x80000000 0x00 0x40000000>; + }; +}; + +&nand_controller { + status = "okay"; + + nand@1 { + compatible = "brcm,nandcs"; + reg = <1>; + nand-ecc-step-size = <512>; + nand-ecc-strength = <8>; + nand-on-flash-bbt; + + #size-cells = <2>; + #address-cells = <2>; + + flash1.rootfs0@0 { + reg = <0x0 0x0 0x0 0x80000000>; + }; + + flash1.rootfs1@80000000 { + reg = <0x0 0x80000000 0x0 0x80000000>; + }; + }; +}; diff --git a/dts/src/arm/broadcom/bcm7445.dtsi b/dts/src/arm/broadcom/bcm7445.dtsi new file mode 100644 index 0000000000..5ac2042515 --- /dev/null +++ b/dts/src/arm/broadcom/bcm7445.dtsi @@ -0,0 +1,315 @@ +// SPDX-License-Identifier: GPL-2.0 +#include <dt-bindings/interrupt-controller/arm-gic.h> + +/ { + #address-cells = <2>; + #size-cells = <2>; + model = "Broadcom STB (bcm7445)"; + compatible = "brcm,bcm7445", "brcm,brcmstb"; + interrupt-parent = <&gic>; + + chosen { + bootargs = "console=ttyS0,115200 earlyprintk"; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + compatible = "brcm,brahma-b15"; + device_type = "cpu"; + enable-method = "brcm,brahma-b15"; + reg = <0>; + }; + + cpu@1 { + compatible = "brcm,brahma-b15"; + device_type = "cpu"; + enable-method = "brcm,brahma-b15"; + reg = <1>; + }; + + cpu@2 { + compatible = "brcm,brahma-b15"; + device_type = "cpu"; + enable-method = "brcm,brahma-b15"; + reg = <2>; + }; + + cpu@3 { + compatible = "brcm,brahma-b15"; + device_type = "cpu"; + enable-method = "brcm,brahma-b15"; + reg = <3>; + }; + }; + + gic: interrupt-controller@ffd00000 { + compatible = "brcm,brahma-b15-gic", "arm,cortex-a15-gic"; + reg = <0x00 0xffd01000 0x00 0x1000>, + <0x00 0xffd02000 0x00 0x2000>, + <0x00 0xffd04000 0x00 0x2000>, + <0x00 0xffd06000 0x00 0x2000>; + interrupt-controller; + #interrupt-cells = <3>; + }; + + timer { + compatible = "arm,armv7-timer"; + interrupts = <GIC_PPI 13 (GIC_CPU_MASK_RAW(15) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 14 (GIC_CPU_MASK_RAW(15) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 11 (GIC_CPU_MASK_RAW(15) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 10 (GIC_CPU_MASK_RAW(15) | IRQ_TYPE_LEVEL_LOW)>; + }; + + rdb@f0000000 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "simple-bus"; + ranges = <0 0x00 0xf0000000 0x1000000>; + + serial@40ab00 { + compatible = "ns16550a"; + reg = <0x40ab00 0x20>; + reg-shift = <2>; + reg-io-width = <4>; + interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>; + clock-frequency = <81000000>; + }; + + sun_top_ctrl: syscon@404000 { + compatible = "brcm,bcm7445-sun-top-ctrl", + "syscon"; + reg = <0x404000 0x51c>; + }; + + hif_cpubiuctrl: syscon@3e2400 { + compatible = "brcm,bcm7445-hif-cpubiuctrl", + "syscon"; + reg = <0x3e2400 0x5b4>; + }; + + hif_continuation: syscon@452000 { + compatible = "brcm,bcm7445-hif-continuation", + "syscon"; + reg = <0x452000 0x100>; + }; + + irq0_intc: interrupt-controller@40a780 { + compatible = "brcm,bcm7120-l2-intc"; + interrupt-parent = <&gic>; + #interrupt-cells = <1>; + reg = <0x40a780 0x8>; + interrupt-controller; + interrupts = <GIC_SPI 0x45 0x0>, + <GIC_SPI 0x43 0x0>; + brcm,int-map-mask = <0x25c>, <0x7000000>; + brcm,int-fwd-mask = <0x70000>; + }; + + irq0_aon_intc: interrupt-controller@417280 { + compatible = "brcm,bcm7120-l2-intc"; + reg = <0x417280 0x8>; + interrupt-parent = <&gic>; + #interrupt-cells = <1>; + interrupt-controller; + interrupts = <GIC_SPI 0x46 0x0>, + <GIC_SPI 0x44 0x0>, + <GIC_SPI 0x49 0x0>; + brcm,int-map-mask = <0x1e3 0x18000000 0x100000>; + brcm,int-fwd-mask = <0x0>; + brcm,irq-can-wake; + }; + + hif_intr2_intc: interrupt-controller@3e1000 { + compatible = "brcm,l2-intc"; + reg = <0x3e1000 0x30>; + interrupt-controller; + #interrupt-cells = <1>; + interrupts = <GIC_SPI 0x20 0x0>; + interrupt-parent = <&gic>; + interrupt-names = "hif"; + }; + + aon_pm_l2_intc: interrupt-controller@410640 { + compatible = "brcm,l2-intc"; + reg = <0x410640 0x30>; + interrupt-controller; + #interrupt-cells = <1>; + interrupts = <GIC_SPI 0x40 0x0>; + interrupt-parent = <&gic>; + brcm,irq-can-wake; + }; + + aon-ctrl@410000 { + compatible = "brcm,brcmstb-aon-ctrl"; + reg = <0x410000 0x200>, <0x410200 0x400>; + reg-names = "aon-ctrl", "aon-sram"; + }; + + nand_controller: nand-controller@3e2800 { + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + compatible = "brcm,brcmnand-v7.1", "brcm,brcmnand"; + reg-names = "nand", "flash-dma"; + reg = <0x3e2800 0x600>, <0x3e3000 0x2c>; + interrupt-parent = <&hif_intr2_intc>; + interrupts = <24>, <4>; + interrupt-names = "nand_ctlrdy", "flash_dma_done"; + }; + + sata@45a000 { + compatible = "brcm,bcm7445-ahci", "brcm,sata3-ahci"; + reg-names = "ahci", "top-ctrl"; + reg = <0x45a000 0xa9c>, <0x458040 0x24>; + interrupts = <GIC_SPI 30 0>; + #address-cells = <1>; + #size-cells = <0>; + + sata0: sata-port@0 { + reg = <0>; + phys = <&sata_phy0>; + }; + + sata1: sata-port@1 { + reg = <1>; + phys = <&sata_phy1>; + }; + }; + + sata_phy: sata-phy@458100 { + compatible = "brcm,bcm7445-sata-phy", "brcm,phy-sata3"; + reg = <0x458100 0x1f00>; + reg-names = "phy"; + #address-cells = <0x1>; + #size-cells = <0x0>; + + sata_phy0: sata-phy@0 { + reg = <0>; + #phy-cells = <0>; + }; + + sata_phy1: sata-phy@1 { + reg = <1>; + #phy-cells = <0>; + }; + }; + + upg_gio: gpio@40a700 { + compatible = "brcm,bcm7445-gpio", "brcm,brcmstb-gpio"; + reg = <0x40a700 0x80>; + #gpio-cells = <2>; + #interrupt-cells = <2>; + gpio-controller; + interrupt-controller; + interrupt-parent = <&irq0_intc>; + interrupts = <6>; + brcm,gpio-bank-widths = <32 32 32 24>; + }; + + upg_gio_aon: gpio@4172c0 { + compatible = "brcm,bcm7445-gpio", "brcm,brcmstb-gpio"; + reg = <0x4172c0 0x40>; + #gpio-cells = <2>; + #interrupt-cells = <2>; + gpio-controller; + interrupt-controller; + interrupts-extended = <&irq0_aon_intc 0x6>, + <&aon_pm_l2_intc 0x5>; + wakeup-source; + brcm,gpio-bank-widths = <18 4>; + }; + + }; + + memory_controllers@f1100000 { + compatible = "simple-bus"; + ranges = <0x0 0x0 0xf1100000 0x200000>; + #address-cells = <1>; + #size-cells = <1>; + + memc@0 { + compatible = "brcm,brcmstb-memc", "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x0 0x80000>; + + memc-ddr@2000 { + compatible = "brcm,brcmstb-memc-ddr"; + reg = <0x2000 0x800>; + }; + + ddr-phy@6000 { + compatible = "brcm,brcmstb-ddr-phy-v240.1"; + reg = <0x6000 0x21c>; + }; + + shimphy@8000 { + compatible = "brcm,brcmstb-ddr-shimphy-v1.0"; + reg = <0x8000 0xe4>; + }; + }; + + memc@80000 { + compatible = "brcm,brcmstb-memc", "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x80000 0x80000>; + + memc-ddr@2000 { + compatible = "brcm,brcmstb-memc-ddr"; + reg = <0x2000 0x800>; + }; + + ddr-phy@6000 { + compatible = "brcm,brcmstb-ddr-phy-v240.1"; + reg = <0x6000 0x21c>; + }; + + shimphy@8000 { + compatible = "brcm,brcmstb-ddr-shimphy-v1.0"; + reg = <0x8000 0xe4>; + }; + }; + + memc@100000 { + compatible = "brcm,brcmstb-memc", "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x100000 0x80000>; + + memc-ddr@2000 { + compatible = "brcm,brcmstb-memc-ddr"; + reg = <0x2000 0x800>; + }; + + ddr-phy@6000 { + compatible = "brcm,brcmstb-ddr-phy-v240.1"; + reg = <0x6000 0x21c>; + }; + + shimphy@8000 { + compatible = "brcm,brcmstb-ddr-shimphy-v1.0"; + reg = <0x8000 0xe4>; + }; + }; + }; + + sram@ffe00000 { + compatible = "brcm,boot-sram", "mmio-sram"; + reg = <0x0 0xffe00000 0x0 0x10000>; + }; + + smpboot { + compatible = "brcm,brcmstb-smpboot"; + syscon-cpu = <&hif_cpubiuctrl 0x88 0x178>; + syscon-cont = <&hif_continuation>; + }; + + reboot { + compatible = "brcm,brcmstb-reboot"; + syscon = <&sun_top_ctrl 0x304 0x308>; + }; +}; diff --git a/dts/src/arm/broadcom/bcm911360_entphn.dts b/dts/src/arm/broadcom/bcm911360_entphn.dts new file mode 100644 index 0000000000..363009e747 --- /dev/null +++ b/dts/src/arm/broadcom/bcm911360_entphn.dts @@ -0,0 +1,99 @@ +/* + * BSD LICENSE + * + * Copyright(c) 2014 Broadcom Corporation. All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * * Neither the name of Broadcom Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/dts-v1/; + +#include "bcm-cygnus.dtsi" +#include "dt-bindings/input/input.h" + +/ { + model = "Cygnus Enterprise Phone (BCM911360_ENTPHN)"; + compatible = "brcm,bcm11360", "brcm,cygnus"; + + aliases { + serial0 = &uart3; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + gpio-keys { + compatible = "gpio-keys"; + + button-hook { + label = "HOOK"; + linux,code = <KEY_O>; + gpios = <&gpio_asiu 48 0>; + }; + }; +}; + +ð0 { + status = "okay"; +}; + +&mdio { + status = "okay"; +}; + +&switch { + status = "okay"; +}; + +&v3d { + assigned-clocks = + <&mipipll BCM_CYGNUS_MIPIPLL>, + <&mipipll BCM_CYGNUS_MIPIPLL_CH2_V3D>; + assigned-clock-rates = <525000000>, <300000000>; + status = "okay"; +}; + +&uart3 { + status = "okay"; +}; + +&nand_controller { + nand@1 { + compatible = "brcm,nandcs"; + reg = <0>; + nand-on-flash-bbt; + + #address-cells = <1>; + #size-cells = <1>; + + nand-ecc-strength = <24>; + nand-ecc-step-size = <1024>; + + brcm,nand-oob-sector-size = <27>; + }; +}; diff --git a/dts/src/arm/broadcom/bcm911360k.dts b/dts/src/arm/broadcom/bcm911360k.dts new file mode 100644 index 0000000000..091c73a46e --- /dev/null +++ b/dts/src/arm/broadcom/bcm911360k.dts @@ -0,0 +1,52 @@ +/* + * BSD LICENSE + * + * Copyright(c) 2014 Broadcom Corporation. All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * * Neither the name of Broadcom Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/dts-v1/; + +#include "bcm-cygnus.dtsi" + +/ { + model = "Cygnus SVK (BCM911360K)"; + compatible = "brcm,bcm11360", "brcm,cygnus"; + + aliases { + serial0 = &uart3; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; +}; + +&uart3 { + status = "okay"; +}; diff --git a/dts/src/arm/broadcom/bcm94708.dts b/dts/src/arm/broadcom/bcm94708.dts new file mode 100644 index 0000000000..d9eb2040b9 --- /dev/null +++ b/dts/src/arm/broadcom/bcm94708.dts @@ -0,0 +1,49 @@ +/* + * BSD LICENSE + * + * Copyright(c) 2015 Broadcom Corporation. All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * * Neither the name of Broadcom Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/dts-v1/; + +#include "bcm4708.dtsi" + +/ { + model = "NorthStar SVK (BCM94708)"; + compatible = "brcm,bcm94708", "brcm,bcm4708"; + + memory@0 { + device_type = "memory"; + reg = <0x00000000 0x08000000>; + }; +}; + +&usb3_phy { + status = "okay"; +}; diff --git a/dts/src/arm/broadcom/bcm94709.dts b/dts/src/arm/broadcom/bcm94709.dts new file mode 100644 index 0000000000..618c812eef --- /dev/null +++ b/dts/src/arm/broadcom/bcm94709.dts @@ -0,0 +1,49 @@ +/* + * BSD LICENSE + * + * Copyright(c) 2015 Broadcom Corporation. All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * * Neither the name of Broadcom Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/dts-v1/; + +#include "bcm4708.dtsi" + +/ { + model = "NorthStar SVK (BCM94709)"; + compatible = "brcm,bcm94709", "brcm,bcm4709", "brcm,bcm4708"; + + memory@0 { + device_type = "memory"; + reg = <0x00000000 0x08000000>; + }; +}; + +&usb3_phy { + status = "okay"; +}; diff --git a/dts/src/arm/broadcom/bcm947189acdbmr.dts b/dts/src/arm/broadcom/bcm947189acdbmr.dts new file mode 100644 index 0000000000..0b8727ae6f --- /dev/null +++ b/dts/src/arm/broadcom/bcm947189acdbmr.dts @@ -0,0 +1,96 @@ +/* + * Copyright (C) 2017 Broadcom + * Author: Florian Fainelli <f.fainelli@gmail.com> + * + * Licensed under the ISC license. + */ + +/dts-v1/; + +#include "bcm53573.dtsi" + +/ { + compatible = "brcm,bcm947189acdbmr", "brcm,bcm47189", "brcm,bcm53573"; + model = "Broadcom BCM947189ACDBMR"; + + chosen { + bootargs = "console=ttyS0,115200 earlycon"; + }; + + memory@0 { + device_type = "memory"; + reg = <0x00000000 0x08000000>; + }; + + leds { + compatible = "gpio-leds"; + + led-wps { + label = "bcm53xx:blue:wps"; + gpios = <&chipcommon 10 GPIO_ACTIVE_HIGH>; + }; + + led-5ghz { + label = "bcm53xx:blue:5ghz"; + gpios = <&chipcommon 11 GPIO_ACTIVE_HIGH>; + }; + + led-2ghz { + label = "bcm53xx:blue:2ghz"; + gpios = <&chipcommon 12 GPIO_ACTIVE_HIGH>; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + + button-restart { + label = "Reset"; + linux,code = <KEY_RESTART>; + gpios = <&chipcommon 7 GPIO_ACTIVE_HIGH>; + }; + + button-wps { + label = "WPS"; + linux,code = <KEY_WPS_BUTTON>; + gpios = <&chipcommon 9 GPIO_ACTIVE_LOW>; + }; + }; + + spi { + compatible = "spi-gpio"; + num-chipselects = <1>; + sck-gpios = <&chipcommon 21 0>; + miso-gpios = <&chipcommon 22 0>; + mosi-gpios = <&chipcommon 23 0>; + cs-gpios = <&chipcommon 24 0>; + #address-cells = <1>; + #size-cells = <0>; + + /* External BCM6802 MoCA chip is connected */ + }; +}; + +&pcie0 { + ranges = <0x00000000 0 0 0 0 0x00100000>; + #address-cells = <3>; + #size-cells = <2>; + + bridge@0,0,0 { + reg = <0x0000 0 0 0 0>; + ranges = <0x00000000 0 0 0 0 0 0 0x00100000>; + #address-cells = <3>; + #size-cells = <2>; + + wifi@0,1,0 { + reg = <0x0000 0 0 0 0>; + ranges = <0x00000000 0 0 0 0x00100000>; + #address-cells = <1>; + #size-cells = <1>; + }; + }; +}; + +&usb2 { + vcc-gpio = <&chipcommon 8 GPIO_ACTIVE_HIGH>; +}; diff --git a/dts/src/arm/broadcom/bcm947622.dts b/dts/src/arm/broadcom/bcm947622.dts new file mode 100644 index 0000000000..6241485408 --- /dev/null +++ b/dts/src/arm/broadcom/bcm947622.dts @@ -0,0 +1,44 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright 2019 Broadcom Ltd. + */ + +/dts-v1/; + +#include "bcm47622.dtsi" + +/ { + model = "Broadcom BCM947622 Reference Board"; + compatible = "brcm,bcm947622", "brcm,bcm47622", "brcm,bcmbca"; + + aliases { + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x08000000>; + }; +}; + +&uart0 { + status = "okay"; +}; + +&hsspi { + status = "okay"; +}; + +&nand_controller { + brcm,wp-not-connected; + status = "okay"; +}; + +&nandcs { + nand-on-flash-bbt; + brcm,nand-ecc-use-strap; +}; diff --git a/dts/src/arm/broadcom/bcm953012er.dts b/dts/src/arm/broadcom/bcm953012er.dts new file mode 100644 index 0000000000..d939ec9f4a --- /dev/null +++ b/dts/src/arm/broadcom/bcm953012er.dts @@ -0,0 +1,100 @@ +/* + * BSD LICENSE + * + * Copyright(c) 2016 Broadcom. All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * * Neither the name of Broadcom Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/dts-v1/; + +#include "bcm4708.dtsi" +#include "bcm5301x-nand-cs0-bch8.dtsi" + +/ { + model = "NorthStar Enterprise Router (BCM953012ER)"; + compatible = "brcm,bcm953012er", "brcm,bcm53012", "brcm,bcm4708"; + + memory@0 { + device_type = "memory"; + reg = <0x00000000 0x8000000>; + }; + + gpio-keys { + compatible = "gpio-keys"; + + button-wps { + label = "WPS"; + linux,code = <KEY_WPS_BUTTON>; + gpios = <&chipcommon 6 GPIO_ACTIVE_LOW>; + }; + + button-restart { + label = "Reset"; + linux,code = <KEY_RESTART>; + gpios = <&chipcommon 15 GPIO_ACTIVE_LOW>; + }; + }; +}; + +&spi_nor { + status = "okay"; +}; + +&srab { + status = "okay"; + + ports { + port@0 { + reg = <0>; + label = "port0"; + }; + + port@1 { + reg = <1>; + label = "port1"; + }; + + port@5 { + reg = <5>; + label = "cpu"; + ethernet = <&gmac0>; + }; + + port@7 { + status = "disabled"; + }; + + port@8 { + status = "disabled"; + }; + }; +}; + +&usb3_phy { + status = "okay"; +}; diff --git a/dts/src/arm/broadcom/bcm953012hr.dts b/dts/src/arm/broadcom/bcm953012hr.dts new file mode 100644 index 0000000000..b070b69466 --- /dev/null +++ b/dts/src/arm/broadcom/bcm953012hr.dts @@ -0,0 +1,102 @@ +/* + * SPDX-License-Identifier: BSD-3-Clause + * + * Copyright(c) 2017 Broadcom + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * * Neither the name of Broadcom nor the names of its contributors + * may be used to endorse or promote products derived from this + * software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/dts-v1/; + +#include "bcm4708.dtsi" +#include "bcm5301x-nand-cs0-bch4.dtsi" + +/ { + model = "NorthStar HR (BCM953012HR)"; + compatible = "brcm,bcm953012hr", "brcm,bcm53012", "brcm,bcm4708"; + + aliases { + ethernet0 = &gmac0; + ethernet1 = &gmac1; + ethernet2 = &gmac2; + }; + + memory@80000000 { + device_type = "memory"; + reg = <0x80000000 0x10000000>; + }; +}; + +&nandcs { + partition@0 { + label = "nboot"; + reg = <0x00000000 0x00200000>; + read-only; + }; + partition@200000 { + label = "nenv"; + reg = <0x00200000 0x00400000>; + }; + partition@600000 { + label = "nsystem"; + reg = <0x00600000 0x00a00000>; + }; + partition@1000000 { + label = "nrootfs"; + reg = <0x01000000 0x07000000>; + }; +}; + +&spi_nor { + status = "okay"; + spi-max-frequency = <62500000>; + m25p,default-addr-width = <3>; + + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "boot"; + reg = <0x00000000 0x000d0000>; + }; + partition@d000 { + label = "env"; + reg = <0x000d0000 0x00030000>; + }; + partition@100000 { + label = "system"; + reg = <0x00100000 0x00600000>; + }; + partition@700000 { + label = "rootfs"; + reg = <0x00700000 0x00900000>; + }; +}; + +&usb3_phy { + status = "okay"; +}; diff --git a/dts/src/arm/broadcom/bcm953012k.dts b/dts/src/arm/broadcom/bcm953012k.dts new file mode 100644 index 0000000000..f1e6bcaa1e --- /dev/null +++ b/dts/src/arm/broadcom/bcm953012k.dts @@ -0,0 +1,120 @@ +/* + * BSD LICENSE + * + * Copyright(c) 2015 Broadcom Corporation. All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * * Neither the name of Broadcom Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/dts-v1/; + +#include "bcm4708.dtsi" + +/ { + model = "NorthStar SVK (BCM953012K)"; + compatible = "brcm,bcm953012k", "brcm,bcm53012", "brcm,bcm4708"; + + aliases { + serial0 = &uart0; + serial1 = &uart1; + }; + + memory@80000000 { + device_type = "memory"; + reg = <0x80000000 0x10000000>; + }; +}; + +&nand_controller { + nand@0 { + compatible = "brcm,nandcs"; + reg = <0>; + nand-on-flash-bbt; + + #address-cells = <1>; + #size-cells = <1>; + + nand-ecc-strength = <4>; + nand-ecc-step-size = <512>; + + partition@0 { + label = "nboot"; + reg = <0x00000000 0x00200000>; + read-only; + }; + partition@200000 { + label = "nenv"; + reg = <0x00200000 0x00400000>; + }; + partition@600000 { + label = "nsystem"; + reg = <0x00600000 0x00a00000>; + }; + partition@1000000 { + label = "nrootfs"; + reg = <0x01000000 0x07000000>; + }; + }; +}; + +&spi_nor { + status = "okay"; + spi-max-frequency = <62500000>; + m25p,default-addr-width = <3>; + + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "boot"; + reg = <0x00000000 0x000d0000>; + }; + partition@d000 { + label = "env"; + reg = <0x000d0000 0x00030000>; + }; + partition@100000 { + label = "system"; + reg = <0x00100000 0x00600000>; + }; + partition@700000 { + label = "rootfs"; + reg = <0x00700000 0x00900000>; + }; +}; + +&uart0 { + status = "okay"; +}; + +&uart1 { + status = "okay"; +}; + +&usb3_phy { + status = "okay"; +}; diff --git a/dts/src/arm/broadcom/bcm958300k.dts b/dts/src/arm/broadcom/bcm958300k.dts new file mode 100644 index 0000000000..dda3e11b71 --- /dev/null +++ b/dts/src/arm/broadcom/bcm958300k.dts @@ -0,0 +1,77 @@ +/* + * BSD LICENSE + * + * Copyright(c) 2014 Broadcom Corporation. All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * * Neither the name of Broadcom Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/dts-v1/; + +#include "bcm-cygnus.dtsi" +#include "bcm9hmidc.dtsi" + +/ { + model = "Cygnus SVK (BCM958300K)"; + compatible = "brcm,bcm58300", "brcm,cygnus"; + + aliases { + serial0 = &uart3; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; +}; + +&pcie0 { + status = "okay"; +}; + +&pcie1 { + status = "okay"; +}; + +&uart3 { + status = "okay"; +}; + +&nand_controller { + nand@1 { + compatible = "brcm,nandcs"; + reg = <0>; + nand-on-flash-bbt; + + #address-cells = <1>; + #size-cells = <1>; + + nand-ecc-strength = <24>; + nand-ecc-step-size = <1024>; + + brcm,nand-oob-sector-size = <27>; + }; +}; diff --git a/dts/src/arm/broadcom/bcm958305k.dts b/dts/src/arm/broadcom/bcm958305k.dts new file mode 100644 index 0000000000..ea3c6b88b3 --- /dev/null +++ b/dts/src/arm/broadcom/bcm958305k.dts @@ -0,0 +1,85 @@ +/* + * BSD LICENSE + * + * Copyright(c) 2015 Broadcom Corporation. All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * * Neither the name of Broadcom Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/dts-v1/; + +#include "bcm-cygnus.dtsi" +#include "bcm9hmidc.dtsi" + +/ { + model = "Cygnus Wireless Audio (BCM958305K)"; + compatible = "brcm,bcm58305", "brcm,cygnus"; + + aliases { + serial0 = &uart3; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; +}; + +&i2c0 { + status = "okay"; +}; + +&i2c1 { + status = "okay"; +}; + +&pcie0 { + status = "okay"; +}; + +&pcie1 { + status = "okay"; +}; + +&uart3 { + status = "okay"; +}; + +&nand_controller { + nand@1 { + compatible = "brcm,nandcs"; + reg = <0>; + nand-on-flash-bbt; + + #address-cells = <1>; + #size-cells = <1>; + + nand-ecc-strength = <24>; + nand-ecc-step-size = <1024>; + + brcm,nand-oob-sector-size = <27>; + }; +}; diff --git a/dts/src/arm/broadcom/bcm958522er.dts b/dts/src/arm/broadcom/bcm958522er.dts new file mode 100644 index 0000000000..15f023656d --- /dev/null +++ b/dts/src/arm/broadcom/bcm958522er.dts @@ -0,0 +1,185 @@ +/* + * BSD LICENSE + * + * Copyright(c) 2016 Broadcom. All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * * Neither the name of Broadcom Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/dts-v1/; + +#include "bcm-nsp.dtsi" +#include <dt-bindings/gpio/gpio.h> + +/ { + model = "NorthStar Plus SVK (BCM958522ER)"; + compatible = "brcm,bcm958522er", "brcm,bcm58522", "brcm,nsp"; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + memory@60000000 { + device_type = "memory"; + reg = <0x60000000 0x80000000>; + }; + + gpio-restart { + compatible = "gpio-restart"; + gpios = <&gpioa 15 GPIO_ACTIVE_LOW>; + open-source; + priority = <200>; + }; +}; + +/* USB 3 support needed to be complete */ + +&dma { + status = "okay"; +}; + +&amac0 { + status = "okay"; +}; + +&amac1 { + status = "okay"; +}; + +&ehci0 { + status = "okay"; +}; + +&nand_controller { + nand@0 { + compatible = "brcm,nandcs"; + reg = <0>; + nand-on-flash-bbt; + + #address-cells = <1>; + #size-cells = <1>; + + nand-ecc-strength = <24>; + nand-ecc-step-size = <1024>; + + brcm,nand-oob-sector-size = <27>; + + partition@0 { + label = "nboot"; + reg = <0x00000000 0x00200000>; + read-only; + }; + partition@200000 { + label = "nenv"; + reg = <0x00200000 0x00400000>; + }; + partition@600000 { + label = "nsystem"; + reg = <0x00600000 0x00a00000>; + }; + partition@1000000 { + label = "nrootfs"; + reg = <0x01000000 0x03000000>; + }; + partition@4000000 { + label = "ncustfs"; + reg = <0x04000000 0x3c000000>; + }; + }; +}; + +&ohci0 { + status = "okay"; +}; + +&pcie0 { + status = "okay"; +}; + +&pcie1 { + status = "okay"; +}; + +&pinctrl { + pinctrl-names = "default"; + pinctrl-0 = <&nand_sel>; + nand_sel: nand_sel { + function = "nand"; + groups = "nand_grp"; + }; +}; + +&qspi { + status = "okay"; + bspi-sel = <0>; + flash: flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "m25p80"; + reg = <0x0>; + spi-max-frequency = <12500000>; + m25p,fast-read; + spi-cpol; + spi-cpha; + + partition@0 { + label = "boot"; + reg = <0x00000000 0x000a0000>; + }; + + partition@a0000 { + label = "env"; + reg = <0x000a0000 0x00060000>; + }; + + partition@100000 { + label = "system"; + reg = <0x00100000 0x00600000>; + }; + + partition@700000 { + label = "rootfs"; + reg = <0x00700000 0x01900000>; + }; + }; +}; + +&uart0 { + status = "okay"; +}; + +&usb3_phy { + status = "okay"; +}; + +&xhci { + status = "okay"; +}; + +&srab { + compatible = "brcm,bcm58522-srab", "brcm,nsp-srab"; +}; diff --git a/dts/src/arm/broadcom/bcm958525er.dts b/dts/src/arm/broadcom/bcm958525er.dts new file mode 100644 index 0000000000..9b9c225a1f --- /dev/null +++ b/dts/src/arm/broadcom/bcm958525er.dts @@ -0,0 +1,197 @@ +/* + * BSD LICENSE + * + * Copyright(c) 2016 Broadcom. All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * * Neither the name of Broadcom Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/dts-v1/; + +#include "bcm-nsp.dtsi" +#include <dt-bindings/gpio/gpio.h> + +/ { + model = "NorthStar Plus SVK (BCM958525ER)"; + compatible = "brcm,bcm958525er", "brcm,bcm58525", "brcm,nsp"; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + memory@60000000 { + device_type = "memory"; + reg = <0x60000000 0x80000000>; + }; + + gpio-restart { + compatible = "gpio-restart"; + gpios = <&gpioa 15 GPIO_ACTIVE_LOW>; + open-source; + priority = <200>; + }; +}; + +/* USB 3 support needed to be complete */ + +&dma { + status = "okay"; +}; + +&amac0 { + status = "okay"; +}; + +&amac1 { + status = "okay"; +}; + +&ehci0 { + status = "okay"; +}; + +&nand_controller { + nand@0 { + compatible = "brcm,nandcs"; + reg = <0>; + nand-on-flash-bbt; + + #address-cells = <1>; + #size-cells = <1>; + + nand-ecc-strength = <24>; + nand-ecc-step-size = <1024>; + + brcm,nand-oob-sector-size = <27>; + + partition@0 { + label = "nboot"; + reg = <0x00000000 0x00200000>; + read-only; + }; + partition@200000 { + label = "nenv"; + reg = <0x00200000 0x00400000>; + }; + partition@600000 { + label = "nsystem"; + reg = <0x00600000 0x00a00000>; + }; + partition@1000000 { + label = "nrootfs"; + reg = <0x01000000 0x03000000>; + }; + partition@4000000 { + label = "ncustfs"; + reg = <0x04000000 0x3c000000>; + }; + }; +}; + +&ohci0 { + status = "okay"; +}; + +&pcie0 { + status = "okay"; +}; + +&pcie1 { + status = "okay"; +}; + +&pinctrl { + pinctrl-names = "default"; + pinctrl-0 = <&nand_sel>; + nand_sel: nand_sel { + function = "nand"; + groups = "nand_grp"; + }; +}; + +&qspi { + status = "okay"; + bspi-sel = <0>; + flash: flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "m25p80"; + reg = <0x0>; + spi-max-frequency = <12500000>; + m25p,fast-read; + spi-cpol; + spi-cpha; + + partition@0 { + label = "boot"; + reg = <0x00000000 0x000a0000>; + }; + + partition@a0000 { + label = "env"; + reg = <0x000a0000 0x00060000>; + }; + + partition@100000 { + label = "system"; + reg = <0x00100000 0x00600000>; + }; + + partition@700000 { + label = "rootfs"; + reg = <0x00700000 0x01900000>; + }; + }; +}; + +&sata_phy0 { + status = "okay"; +}; + +&sata_phy1 { + status = "okay"; +}; + +&sata { + status = "okay"; +}; + +&uart0 { + status = "okay"; +}; + +&usb3_phy { + status = "okay"; +}; + +&xhci { + status = "okay"; +}; + +&srab { + compatible = "brcm,bcm58525-srab", "brcm,nsp-srab"; +}; diff --git a/dts/src/arm/broadcom/bcm958525xmc.dts b/dts/src/arm/broadcom/bcm958525xmc.dts new file mode 100644 index 0000000000..ca93114527 --- /dev/null +++ b/dts/src/arm/broadcom/bcm958525xmc.dts @@ -0,0 +1,217 @@ +/* + * BSD LICENSE + * + * Copyright(c) 2016 Broadcom. All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * * Neither the name of Broadcom Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/dts-v1/; + +#include "bcm-nsp.dtsi" +#include <dt-bindings/gpio/gpio.h> + +/ { + model = "NorthStar Plus XMC (BCM958525xmc)"; + compatible = "brcm,bcm958525xmc", "brcm,bcm58525", "brcm,nsp"; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + memory@60000000 { + device_type = "memory"; + reg = <0x60000000 0x40000000>; + }; + + gpio-restart { + compatible = "gpio-restart"; + gpios = <&gpioa 31 GPIO_ACTIVE_LOW>; + open-source; + priority = <200>; + }; +}; + +/* XHCI support needed to be complete */ + +&dma { + status = "okay"; +}; + +&amac0 { + status = "okay"; +}; + +&ehci0 { + status = "okay"; +}; + +&i2c0 { + status = "okay"; + + temperature-sensor@4c { + compatible = "adi,adt7461a"; + reg = <0x4c>; + }; + + eeprom@52 { + compatible = "atmel,24c02"; + reg = <0x52>; + pagesize = <16>; + }; + + rtc@68 { + compatible = "st,m41t81"; + reg = <0x68>; + }; +}; + +&nand_controller { + nand@0 { + compatible = "brcm,nandcs"; + reg = <0>; + nand-on-flash-bbt; + + #address-cells = <1>; + #size-cells = <1>; + + nand-ecc-strength = <24>; + nand-ecc-step-size = <1024>; + + brcm,nand-oob-sector-size = <27>; + + partition@0 { + label = "nboot"; + reg = <0x00000000 0x00200000>; + read-only; + }; + partition@200000 { + label = "nenv"; + reg = <0x00200000 0x00400000>; + }; + partition@600000 { + label = "nsystem"; + reg = <0x00600000 0x00a00000>; + }; + partition@1000000 { + label = "nrootfs"; + reg = <0x01000000 0x03000000>; + }; + partition@4000000 { + label = "ncustfs"; + reg = <0x04000000 0x3c000000>; + }; + }; +}; + +&ohci0 { + status = "okay"; +}; + +&pcie0 { + status = "okay"; +}; + +&pcie1 { + status = "okay"; +}; + +&pinctrl { + pinctrl-names = "default"; + pinctrl-0 = <&nand_sel>; + nand_sel: nand_sel { + function = "nand"; + groups = "nand_grp"; + }; +}; + +&qspi { + status = "okay"; + bspi-sel = <0>; + flash: flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "m25p80"; + reg = <0x0>; + spi-max-frequency = <12500000>; + m25p,fast-read; + spi-cpol; + spi-cpha; + + partition@0 { + label = "boot"; + reg = <0x00000000 0x000a0000>; + }; + + partition@a0000 { + label = "env"; + reg = <0x000a0000 0x00060000>; + }; + + partition@100000 { + label = "system"; + reg = <0x00100000 0x00600000>; + }; + + partition@700000 { + label = "rootfs"; + reg = <0x00700000 0x01900000>; + }; + }; +}; + +&sata_phy0 { + status = "okay"; +}; + +&sata_phy1 { + status = "okay"; +}; + +&sata { + status = "okay"; +}; + +&sdio { + status = "okay"; +}; + +&uart0 { + status = "okay"; +}; + +&usb3_phy { + status = "okay"; +}; + +&xhci { + status = "okay"; +}; + +&srab { + compatible = "brcm,bcm58525-srab", "brcm,nsp-srab"; +}; diff --git a/dts/src/arm/broadcom/bcm958622hr.dts b/dts/src/arm/broadcom/bcm958622hr.dts new file mode 100644 index 0000000000..9db3c85145 --- /dev/null +++ b/dts/src/arm/broadcom/bcm958622hr.dts @@ -0,0 +1,227 @@ +/* + * BSD LICENSE + * + * Copyright(c) 2016 Broadcom. All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * * Neither the name of Broadcom Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/dts-v1/; + +#include "bcm-nsp.dtsi" +#include <dt-bindings/gpio/gpio.h> + +/ { + model = "NorthStar Plus SVK (BCM958622HR)"; + compatible = "brcm,bcm958622hr", "brcm,bcm58622", "brcm,nsp"; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + memory@60000000 { + device_type = "memory"; + reg = <0x60000000 0x80000000>; + }; + + gpio-restart { + compatible = "gpio-restart"; + gpios = <&gpioa 15 GPIO_ACTIVE_LOW>; + open-source; + priority = <200>; + }; +}; + +/* USB 3 and SLIC support needed to be complete */ + +&dma { + status = "okay"; +}; + +&amac0 { + status = "okay"; +}; + +&amac1 { + status = "okay"; +}; + +&amac2 { + status = "okay"; +}; + +&ehci0 { + status = "okay"; +}; + +&nand_controller { + nand@0 { + compatible = "brcm,nandcs"; + reg = <0>; + nand-on-flash-bbt; + + #address-cells = <1>; + #size-cells = <1>; + + nand-ecc-strength = <24>; + nand-ecc-step-size = <1024>; + + brcm,nand-oob-sector-size = <27>; + + partition@0 { + label = "nboot"; + reg = <0x00000000 0x00200000>; + read-only; + }; + partition@200000 { + label = "nenv"; + reg = <0x00200000 0x00400000>; + }; + partition@600000 { + label = "nsystem"; + reg = <0x00600000 0x00a00000>; + }; + partition@1000000 { + label = "nrootfs"; + reg = <0x01000000 0x03000000>; + }; + partition@4000000 { + label = "ncustfs"; + reg = <0x04000000 0x3c000000>; + }; + }; +}; + +&ohci0 { + status = "okay"; +}; + +&pcie0 { + status = "okay"; +}; + +&pcie1 { + status = "okay"; +}; + +&pinctrl { + pinctrl-names = "default"; + pinctrl-0 = <&nand_sel>; + nand_sel: nand_sel { + function = "nand"; + groups = "nand_grp"; + }; +}; + +&qspi { + status = "okay"; + bspi-sel = <0>; + flash: flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "m25p80"; + reg = <0x0>; + spi-max-frequency = <12500000>; + m25p,fast-read; + spi-cpol; + spi-cpha; + + partition@0 { + label = "boot"; + reg = <0x00000000 0x000a0000>; + }; + + partition@a0000 { + label = "env"; + reg = <0x000a0000 0x00060000>; + }; + + partition@100000 { + label = "system"; + reg = <0x00100000 0x00600000>; + }; + + partition@700000 { + label = "rootfs"; + reg = <0x00700000 0x01900000>; + }; + }; +}; + +&srab { + compatible = "brcm,bcm58622-srab", "brcm,nsp-srab"; + status = "okay"; + + ports { + port@0 { + label = "port0"; + reg = <0>; + }; + + port@1 { + label = "port1"; + reg = <1>; + }; + + port@2 { + label = "port2"; + reg = <2>; + }; + + port@3 { + label = "port3"; + reg = <3>; + }; + + port@4 { + label = "port4"; + reg = <4>; + }; + + port@8 { + ethernet = <&amac2>; + label = "cpu"; + reg = <8>; + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + }; +}; + +&uart0 { + status = "okay"; +}; + +&usb3_phy { + status = "okay"; +}; + +&xhci { + status = "okay"; +}; diff --git a/dts/src/arm/broadcom/bcm958623hr.dts b/dts/src/arm/broadcom/bcm958623hr.dts new file mode 100644 index 0000000000..32786e7c4e --- /dev/null +++ b/dts/src/arm/broadcom/bcm958623hr.dts @@ -0,0 +1,231 @@ +/* + * BSD LICENSE + * + * Copyright(c) 2016 Broadcom. All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * * Neither the name of Broadcom Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/dts-v1/; + +#include "bcm-nsp.dtsi" +#include <dt-bindings/gpio/gpio.h> + +/ { + model = "NorthStar Plus SVK (BCM958623HR)"; + compatible = "brcm,bcm958623hr", "brcm,bcm58623", "brcm,nsp"; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + memory@60000000 { + device_type = "memory"; + reg = <0x60000000 0x80000000>; + }; + + gpio-restart { + compatible = "gpio-restart"; + gpios = <&gpioa 15 GPIO_ACTIVE_LOW>; + open-source; + priority = <200>; + }; +}; + +/* USB 3 and SLIC support needed to be complete */ + +&dma { + status = "okay"; +}; + +&amac0 { + status = "okay"; +}; + +&amac1 { + status = "okay"; +}; + +&amac2 { + status = "okay"; +}; + +&ehci0 { + status = "okay"; +}; + +&nand_controller { + nand@0 { + compatible = "brcm,nandcs"; + reg = <0>; + nand-on-flash-bbt; + + #address-cells = <1>; + #size-cells = <1>; + + nand-ecc-strength = <24>; + nand-ecc-step-size = <1024>; + + brcm,nand-oob-sector-size = <27>; + + partition@0 { + label = "nboot"; + reg = <0x00000000 0x00200000>; + read-only; + }; + partition@200000 { + label = "nenv"; + reg = <0x00200000 0x00400000>; + }; + partition@600000 { + label = "nsystem"; + reg = <0x00600000 0x00a00000>; + }; + partition@1000000 { + label = "nrootfs"; + reg = <0x01000000 0x03000000>; + }; + partition@4000000 { + label = "ncustfs"; + reg = <0x04000000 0x3c000000>; + }; + }; +}; + +&ohci0 { + status = "okay"; +}; + +&pcie0 { + status = "okay"; +}; + +&pcie1 { + status = "okay"; +}; + +&pinctrl { + pinctrl-names = "default"; + pinctrl-0 = <&nand_sel>; + nand_sel: nand_sel { + function = "nand"; + groups = "nand_grp"; + }; +}; + +&sata_phy0 { + status = "okay"; +}; + +&qspi { + status = "okay"; + bspi-sel = <0>; + flash: flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "m25p80"; + reg = <0x0>; + spi-max-frequency = <12500000>; + m25p,fast-read; + spi-cpol; + spi-cpha; + + partition@0 { + label = "boot"; + reg = <0x00000000 0x000a0000>; + }; + + partition@a0000 { + label = "env"; + reg = <0x000a0000 0x00060000>; + }; + + partition@100000 { + label = "system"; + reg = <0x00100000 0x00600000>; + }; + + partition@700000 { + label = "rootfs"; + reg = <0x00700000 0x01900000>; + }; + }; +}; + +&srab { + compatible = "brcm,bcm58623-srab", "brcm,nsp-srab"; + status = "okay"; + + ports { + port@0 { + label = "port0"; + reg = <0>; + }; + + port@1 { + label = "port1"; + reg = <1>; + }; + + port@2 { + label = "port2"; + reg = <2>; + }; + + port@3 { + label = "port3"; + reg = <3>; + }; + + port@4 { + label = "port4"; + reg = <4>; + }; + + port@8 { + ethernet = <&amac2>; + label = "cpu"; + reg = <8>; + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + }; +}; + +&uart0 { + status = "okay"; +}; + +&usb3_phy { + status = "okay"; +}; + +&xhci { + status = "okay"; +}; diff --git a/dts/src/arm/broadcom/bcm958625-meraki-alamo.dtsi b/dts/src/arm/broadcom/bcm958625-meraki-alamo.dtsi new file mode 100644 index 0000000000..c54451dde6 --- /dev/null +++ b/dts/src/arm/broadcom/bcm958625-meraki-alamo.dtsi @@ -0,0 +1,284 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Device Tree Bindings for Cisco Meraki MX65 series (Alamo). + * + * Copyright (C) 2020-2021 Matthew Hagan <mnhagan88@gmail.com> + */ + +#include "bcm958625-meraki-mx6x-common.dtsi" + +/ { + keys { + compatible = "gpio-keys-polled"; + autorepeat; + poll-interval = <20>; + + button-reset { + label = "reset"; + linux,code = <KEY_RESTART>; + gpios = <&gpioa 8 GPIO_ACTIVE_LOW>; + }; + }; + + leds { + compatible = "gpio-leds"; + + led-0 { + /* green:wan1-left */ + function = LED_FUNCTION_ACTIVITY; + function-enumerator = <0>; + color = <LED_COLOR_ID_GREEN>; + gpios = <&gpioa 25 GPIO_ACTIVE_LOW>; + }; + + led-1 { + /* green:wan1-right */ + function = LED_FUNCTION_ACTIVITY; + function-enumerator = <1>; + color = <LED_COLOR_ID_GREEN>; + gpios = <&gpioa 24 GPIO_ACTIVE_LOW>; + }; + + led-2 { + /* green:wan2-left */ + function = LED_FUNCTION_ACTIVITY; + function-enumerator = <2>; + color = <LED_COLOR_ID_GREEN>; + gpios = <&gpioa 27 GPIO_ACTIVE_LOW>; + }; + + led-3 { + /* green:wan2-right */ + function = LED_FUNCTION_ACTIVITY; + function-enumerator = <3>; + color = <LED_COLOR_ID_GREEN>; + gpios = <&gpioa 26 GPIO_ACTIVE_LOW>; + }; + + led-4 { + /* amber:power */ + function = LED_FUNCTION_FAULT; + color = <LED_COLOR_ID_AMBER>; + gpios = <&gpioa 3 GPIO_ACTIVE_HIGH>; + }; + + led-5 { + /* white:status */ + function = LED_FUNCTION_STATUS; + color = <LED_COLOR_ID_WHITE>; + gpios = <&gpioa 31 GPIO_ACTIVE_HIGH>; + }; + }; +}; + +&axi { + mdio-mux@3f1c0 { + compatible = "mdio-mux-mmioreg", "mdio-mux"; + reg = <0x3f1c0 0x4>; + mux-mask = <0x2000>; + mdio-parent-bus = <&mdio_ext>; + #address-cells = <1>; + #size-cells = <0>; + + mdio@0 { + reg = <0x0>; + #address-cells = <1>; + #size-cells = <0>; + + phy_port6: phy@0 { + reg = <0>; + }; + + phy_port7: phy@1 { + reg = <1>; + }; + + phy_port8: phy@2 { + reg = <2>; + }; + + phy_port9: phy@3 { + reg = <3>; + }; + + phy_port10: phy@4 { + reg = <4>; + }; + + switch@10 { + compatible = "qca,qca8337"; + reg = <0x10>; + dsa,member = <1 0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + port@0 { + reg = <0>; + ethernet = <&sgmii1>; + phy-mode = "sgmii"; + qca,sgmii-enable-pll; + qca,sgmii-txclk-falling-edge; + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + + port@1 { + reg = <1>; + label = "lan8"; + phy-handle = <&phy_port6>; + }; + + port@2 { + reg = <2>; + label = "lan9"; + phy-handle = <&phy_port7>; + }; + + port@3 { + reg = <3>; + label = "lan10"; + phy-handle = <&phy_port8>; + }; + + port@4 { + reg = <4>; + label = "lan11"; + phy-handle = <&phy_port9>; + }; + + port@5 { + reg = <5>; + label = "lan12"; + phy-handle = <&phy_port10>; + }; + }; + }; + }; + + mdio-mii@2000 { + reg = <0x2000>; + #address-cells = <1>; + #size-cells = <0>; + + phy_port1: phy@0 { + reg = <0>; + }; + + phy_port2: phy@1 { + reg = <1>; + }; + + phy_port3: phy@2 { + reg = <2>; + }; + + phy_port4: phy@3 { + reg = <3>; + }; + + phy_port5: phy@4 { + reg = <4>; + }; + + switch@10 { + compatible = "qca,qca8337"; + reg = <0x10>; + dsa,member = <2 0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + port@0 { + reg = <0>; + ethernet = <&sgmii0>; + phy-mode = "sgmii"; + qca,sgmii-enable-pll; + qca,sgmii-txclk-falling-edge; + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + + port@1 { + reg = <1>; + label = "lan3"; + phy-handle = <&phy_port1>; + }; + + port@2 { + reg = <2>; + label = "lan4"; + phy-handle = <&phy_port2>; + }; + + port@3 { + reg = <3>; + label = "lan5"; + phy-handle = <&phy_port3>; + }; + + port@4 { + reg = <4>; + label = "lan6"; + phy-handle = <&phy_port4>; + }; + + port@5 { + reg = <5>; + label = "lan7"; + phy-handle = <&phy_port5>; + }; + }; + }; + }; + }; +}; + +&srab { + compatible = "brcm,bcm58625-srab", "brcm,nsp-srab"; + status = "okay"; + dsa,member = <0 0>; + + ports { + port@0 { + label = "wan1"; + reg = <0>; + }; + + port@1 { + label = "wan2"; + reg = <1>; + }; + + sgmii0: port@4 { + label = "sw0"; + reg = <4>; + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + + sgmii1: port@5 { + label = "sw1"; + reg = <5>; + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + + port@8 { + ethernet = <&amac2>; + reg = <8>; + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + }; +}; diff --git a/dts/src/arm/broadcom/bcm958625-meraki-kingpin.dtsi b/dts/src/arm/broadcom/bcm958625-meraki-kingpin.dtsi new file mode 100644 index 0000000000..1830844c84 --- /dev/null +++ b/dts/src/arm/broadcom/bcm958625-meraki-kingpin.dtsi @@ -0,0 +1,162 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Device Tree Bindings for Cisco Meraki MX64 series (Kingpin). + * + * Copyright (C) 2020-2021 Matthew Hagan <mnhagan88@gmail.com> + */ + +#include "bcm958625-meraki-mx6x-common.dtsi" + +/ { + + keys { + compatible = "gpio-keys-polled"; + autorepeat; + poll-interval = <20>; + + button-reset { + label = "reset"; + linux,code = <KEY_RESTART>; + gpios = <&gpioa 6 GPIO_ACTIVE_LOW>; + }; + }; + + leds { + compatible = "gpio-leds"; + + led-0 { + /* green:lan1-left */ + function = LED_FUNCTION_ACTIVITY; + function-enumerator = <0>; + color = <LED_COLOR_ID_GREEN>; + gpios = <&gpioa 19 GPIO_ACTIVE_LOW>; + }; + + led-1 { + /* green:lan1-right */ + function = LED_FUNCTION_ACTIVITY; + function-enumerator = <1>; + color = <LED_COLOR_ID_GREEN>; + gpios = <&gpioa 18 GPIO_ACTIVE_LOW>; + }; + + led-2 { + /* green:lan2-left */ + function = LED_FUNCTION_ACTIVITY; + function-enumerator = <2>; + color = <LED_COLOR_ID_GREEN>; + gpios = <&gpioa 24 GPIO_ACTIVE_LOW>; + }; + + led-3 { + /* green:lan2-right */ + function = LED_FUNCTION_ACTIVITY; + function-enumerator = <3>; + color = <LED_COLOR_ID_GREEN>; + gpios = <&gpioa 20 GPIO_ACTIVE_LOW>; + }; + + led-4 { + /* green:lan3-left */ + function = LED_FUNCTION_ACTIVITY; + function-enumerator = <4>; + color = <LED_COLOR_ID_GREEN>; + gpios = <&gpioa 26 GPIO_ACTIVE_LOW>; + }; + + led-5 { + /* green:lan3-right */ + function = LED_FUNCTION_ACTIVITY; + function-enumerator = <5>; + color = <LED_COLOR_ID_GREEN>; + gpios = <&gpioa 25 GPIO_ACTIVE_LOW>; + }; + + led-6 { + /* green:lan4-left */ + function = LED_FUNCTION_ACTIVITY; + function-enumerator = <6>; + color = <LED_COLOR_ID_GREEN>; + gpios = <&gpioa 28 GPIO_ACTIVE_LOW>; + }; + + led-7 { + /* green:lan4-right */ + function = LED_FUNCTION_ACTIVITY; + function-enumerator = <7>; + color = <LED_COLOR_ID_GREEN>; + gpios = <&gpioa 27 GPIO_ACTIVE_LOW>; + }; + + led-8 { + /* green:wan-left */ + function = LED_FUNCTION_ACTIVITY; + function-enumerator = <8>; + color = <LED_COLOR_ID_GREEN>; + gpios = <&gpioa 30 GPIO_ACTIVE_LOW>; + }; + + led-9 { + /* green:wan-right */ + function = LED_FUNCTION_ACTIVITY; + function-enumerator = <9>; + color = <LED_COLOR_ID_GREEN>; + gpios = <&gpioa 29 GPIO_ACTIVE_LOW>; + }; + + led-a { + /* amber:power */ + function = LED_FUNCTION_FAULT; + color = <LED_COLOR_ID_AMBER>; + gpios = <&gpioa 0 GPIO_ACTIVE_LOW>; + }; + + led-b { + /* white:status */ + function = LED_FUNCTION_STATUS; + color = <LED_COLOR_ID_WHITE>; + gpios = <&gpioa 31 GPIO_ACTIVE_HIGH>; + }; + }; +}; + +&srab { + compatible = "brcm,bcm58625-srab", "brcm,nsp-srab"; + status = "okay"; + + ports { + port@0 { + label = "lan1"; + reg = <0>; + }; + + port@1 { + label = "lan2"; + reg = <1>; + }; + + port@2 { + label = "lan3"; + reg = <2>; + }; + + port@3 { + label = "lan4"; + reg = <3>; + }; + + port@4 { + label = "wan"; + reg = <4>; + }; + + port@8 { + ethernet = <&amac2>; + reg = <8>; + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + }; +}; diff --git a/dts/src/arm/broadcom/bcm958625-meraki-mx64-a0.dts b/dts/src/arm/broadcom/bcm958625-meraki-mx64-a0.dts new file mode 100644 index 0000000000..9944566c11 --- /dev/null +++ b/dts/src/arm/broadcom/bcm958625-meraki-mx64-a0.dts @@ -0,0 +1,25 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Device Tree Bindings for Cisco Meraki MX64 with A0 SoC. + * + * Copyright (C) 2020-2021 Matthew Hagan <mnhagan88@gmail.com> + */ + +/dts-v1/; + +#include "bcm958625-meraki-kingpin.dtsi" +#include "bcm-nsp-ax.dtsi" + +/ { + model = "Cisco Meraki MX64(A0)"; + compatible = "meraki,mx64-a0", "brcm,bcm58625", "brcm,nsp"; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + memory@60000000 { + device_type = "memory"; + reg = <0x60000000 0x80000000>; + }; +}; diff --git a/dts/src/arm/broadcom/bcm958625-meraki-mx64.dts b/dts/src/arm/broadcom/bcm958625-meraki-mx64.dts new file mode 100644 index 0000000000..06939438e8 --- /dev/null +++ b/dts/src/arm/broadcom/bcm958625-meraki-mx64.dts @@ -0,0 +1,24 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Device Tree Bindings for Cisco Meraki MX64 with B0+ SoC. + * + * Copyright (C) 2020-2021 Matthew Hagan <mnhagan88@gmail.com> + */ + +/dts-v1/; + +#include "bcm958625-meraki-kingpin.dtsi" + +/ { + model = "Cisco Meraki MX64"; + compatible = "meraki,mx64", "brcm,bcm58625", "brcm,nsp"; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + memory@60000000 { + device_type = "memory"; + reg = <0x60000000 0x80000000>; + }; +}; diff --git a/dts/src/arm/broadcom/bcm958625-meraki-mx64w-a0.dts b/dts/src/arm/broadcom/bcm958625-meraki-mx64w-a0.dts new file mode 100644 index 0000000000..112fddb1ee --- /dev/null +++ b/dts/src/arm/broadcom/bcm958625-meraki-mx64w-a0.dts @@ -0,0 +1,33 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Device Tree Bindings for Cisco Meraki MX64W with A0 SoC. + * + * Copyright (C) 2020-2021 Matthew Hagan <mnhagan88@gmail.com> + */ + +/dts-v1/; + +#include "bcm958625-meraki-kingpin.dtsi" +#include "bcm-nsp-ax.dtsi" + +/ { + model = "Cisco Meraki MX64W(A0)"; + compatible = "meraki,mx64w-a0", "brcm,bcm58625", "brcm,nsp"; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + memory@60000000 { + device_type = "memory"; + reg = <0x60000000 0x80000000>; + }; +}; + +&pcie0 { + status = "okay"; +}; + +&pcie1 { + status = "okay"; +}; diff --git a/dts/src/arm/broadcom/bcm958625-meraki-mx64w.dts b/dts/src/arm/broadcom/bcm958625-meraki-mx64w.dts new file mode 100644 index 0000000000..de2e367c3e --- /dev/null +++ b/dts/src/arm/broadcom/bcm958625-meraki-mx64w.dts @@ -0,0 +1,32 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Device Tree Bindings for Cisco Meraki MX64W with B0+ SoC. + * + * Copyright (C) 2020-2021 Matthew Hagan <mnhagan88@gmail.com> + */ + +/dts-v1/; + +#include "bcm958625-meraki-kingpin.dtsi" + +/ { + model = "Cisco Meraki MX64W"; + compatible = "meraki,mx64w", "brcm,bcm58625", "brcm,nsp"; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + memory@60000000 { + device_type = "memory"; + reg = <0x60000000 0x80000000>; + }; +}; + +&pcie0 { + status = "okay"; +}; + +&pcie1 { + status = "okay"; +}; diff --git a/dts/src/arm/broadcom/bcm958625-meraki-mx65.dts b/dts/src/arm/broadcom/bcm958625-meraki-mx65.dts new file mode 100644 index 0000000000..d1b684dcdb --- /dev/null +++ b/dts/src/arm/broadcom/bcm958625-meraki-mx65.dts @@ -0,0 +1,24 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Device Tree Bindings for Cisco Meraki MX65. + * + * Copyright (C) 2020-2021 Matthew Hagan <mnhagan88@gmail.com> + */ + +/dts-v1/; + +#include "bcm958625-meraki-alamo.dtsi" + +/ { + model = "Cisco Meraki MX65"; + compatible = "meraki,mx65", "brcm,bcm58625", "brcm,nsp"; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + memory@60000000 { + device_type = "memory"; + reg = <0x60000000 0x80000000>; + }; +}; diff --git a/dts/src/arm/broadcom/bcm958625-meraki-mx65w.dts b/dts/src/arm/broadcom/bcm958625-meraki-mx65w.dts new file mode 100644 index 0000000000..a2165aba36 --- /dev/null +++ b/dts/src/arm/broadcom/bcm958625-meraki-mx65w.dts @@ -0,0 +1,32 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Device Tree Bindings for Cisco Meraki MX65W. + * + * Copyright (C) 2020-2021 Matthew Hagan <mnhagan88@gmail.com> + */ + +/dts-v1/; + +#include "bcm958625-meraki-alamo.dtsi" + +/ { + model = "Cisco Meraki MX65W"; + compatible = "meraki,mx65w", "brcm,bcm58625", "brcm,nsp"; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + memory@60000000 { + device_type = "memory"; + reg = <0x60000000 0x80000000>; + }; +}; + +&pcie0 { + status = "okay"; +}; + +&pcie1 { + status = "okay"; +}; diff --git a/dts/src/arm/broadcom/bcm958625-meraki-mx6x-common.dtsi b/dts/src/arm/broadcom/bcm958625-meraki-mx6x-common.dtsi new file mode 100644 index 0000000000..b0854d881a --- /dev/null +++ b/dts/src/arm/broadcom/bcm958625-meraki-mx6x-common.dtsi @@ -0,0 +1,137 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Common Bindings for Cisco Meraki MX64 (Kingpin) and MX65 (Alamo) devices. + * + * Copyright (C) 2020-2021 Matthew Hagan <mnhagan88@gmail.com> + */ + +#include "bcm-nsp.dtsi" +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/leds/common.h> + +/ { + pwm-leds { + compatible = "pwm-leds"; + + led-1 { + function = LED_FUNCTION_INDICATOR; + color = <LED_COLOR_ID_RED>; + pwms = <&pwm 1 50000>; + max-brightness = <255>; + }; + + led-2 { + function = LED_FUNCTION_POWER; + color = <LED_COLOR_ID_GREEN>; + pwms = <&pwm 2 50000>; + max-brightness = <255>; + }; + + led-3 { + function = LED_FUNCTION_INDICATOR; + color = <LED_COLOR_ID_BLUE>; + pwms = <&pwm 3 50000>; + max-brightness = <255>; + }; + }; +}; + +&amac2 { + status = "okay"; + nvmem-cells = <&mac_address>; + nvmem-cell-names = "mac-address"; +}; + +&ehci0 { + status = "okay"; +}; + +&i2c0 { + status = "okay"; + + eeprom@50 { + compatible = "atmel,24c64"; + reg = <0x50>; + pagesize = <32>; + read-only; + #address-cells = <1>; + #size-cells = <1>; + + mac_address: mac-address@66 { + reg = <0x66 0x6>; + }; + }; +}; + +&nand_controller { + nand@0 { + compatible = "brcm,nandcs"; + reg = <0>; + nand-on-flash-bbt; + + #address-cells = <1>; + #size-cells = <1>; + + nand-ecc-strength = <24>; + nand-ecc-step-size = <1024>; + + brcm,nand-oob-sector-size = <27>; + + partition@0 { + label = "u-boot"; + reg = <0x0 0x80000>; + read-only; + }; + + partition@80000 { + label = "shmoo"; + reg = <0x80000 0x80000>; + read-only; + }; + + partition@100000 { + label = "bootkernel1"; + reg = <0x100000 0x300000>; + }; + + partition@400000 { + label = "nvram"; + reg = <0x400000 0x100000>; + }; + + partition@500000 { + label = "bootkernel2"; + reg = <0x500000 0x300000>; + }; + + partition@800000 { + label = "ubi"; + reg = <0x800000 0x3f700000>; + }; + }; +}; + +&ohci0 { + status = "okay"; +}; + +&pinctrl { + pinctrl-names = "default"; + pinctrl-0 = <&pwm_leds>; + + pwm_leds: pwm_leds { + function = "pwm"; + groups = "pwm1_grp", "pwm2_grp", "pwm3_grp"; + }; +}; + +&pwm { + status = "okay"; + #pwm-cells = <2>; +}; + +&uart0 { + clock-frequency = <62500000>; + status = "okay"; +}; diff --git a/dts/src/arm/broadcom/bcm958625hr.dts b/dts/src/arm/broadcom/bcm958625hr.dts new file mode 100644 index 0000000000..74263d98de --- /dev/null +++ b/dts/src/arm/broadcom/bcm958625hr.dts @@ -0,0 +1,254 @@ +/* + * BSD LICENSE + * + * Copyright(c) 2016 Broadcom. All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * * Neither the name of Broadcom Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/dts-v1/; + +#include "bcm-nsp.dtsi" +#include <dt-bindings/gpio/gpio.h> + +/ { + model = "NorthStar Plus SVK (BCM958625HR)"; + compatible = "brcm,bcm958625hr", "brcm,bcm58625", "brcm,nsp"; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + memory@60000000 { + device_type = "memory"; + reg = <0x60000000 0x20000000>; + }; + + gpio-restart { + compatible = "gpio-restart"; + gpios = <&gpioa 15 GPIO_ACTIVE_LOW>; + open-source; + priority = <200>; + }; + + sfp: sfp { + compatible = "sff,sfp"; + i2c-bus = <&i2c0>; + mod-def0-gpios = <&gpioa 28 GPIO_ACTIVE_LOW>; + los-gpios = <&gpioa 24 GPIO_ACTIVE_HIGH>; + tx-fault-gpios = <&gpioa 30 GPIO_ACTIVE_HIGH>; + tx-disable-gpios = <&gpioa 26 GPIO_ACTIVE_HIGH>; + }; +}; + +&i2c0 { + status = "okay"; +}; + +&dma { + status = "okay"; +}; + +&amac0 { + status = "okay"; +}; + +&amac1 { + status = "okay"; +}; + +&amac2 { + status = "okay"; +}; + +&ehci0 { + status = "okay"; +}; + +&nand_controller { + nand@0 { + compatible = "brcm,nandcs"; + reg = <0>; + nand-on-flash-bbt; + + #address-cells = <1>; + #size-cells = <1>; + + nand-ecc-strength = <24>; + nand-ecc-step-size = <1024>; + + brcm,nand-oob-sector-size = <27>; + + partition@0 { + label = "nboot"; + reg = <0x00000000 0x00200000>; + read-only; + }; + partition@200000 { + label = "nenv"; + reg = <0x00200000 0x00400000>; + }; + partition@600000 { + label = "nsystem"; + reg = <0x00600000 0x00a00000>; + }; + partition@1000000 { + label = "nrootfs"; + reg = <0x01000000 0x03000000>; + }; + partition@4000000 { + label = "ncustfs"; + reg = <0x04000000 0x3c000000>; + }; + }; +}; + +&ohci0 { + status = "okay"; +}; + +&pcie0 { + status = "okay"; +}; + +&pcie1 { + status = "okay"; +}; + +&pinctrl { + pinctrl-names = "default"; + pinctrl-0 = <&nand_sel>; + nand_sel: nand_sel { + function = "nand"; + groups = "nand_grp"; + }; +}; + +&qspi { + status = "okay"; + bspi-sel = <0>; + flash: flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "m25p80"; + reg = <0x0>; + spi-max-frequency = <12500000>; + m25p,fast-read; + spi-cpol; + spi-cpha; + + partition@0 { + label = "boot"; + reg = <0x00000000 0x000a0000>; + }; + + partition@a0000 { + label = "env"; + reg = <0x000a0000 0x00060000>; + }; + + partition@100000 { + label = "system"; + reg = <0x00100000 0x00600000>; + }; + + partition@700000 { + label = "rootfs"; + reg = <0x00700000 0x01900000>; + }; + }; +}; + +&sata_phy0 { + status = "okay"; +}; + +&sata_phy1 { + status = "okay"; +}; + +&srab { + compatible = "brcm,bcm58625-srab", "brcm,nsp-srab"; + status = "okay"; + + ports { + port@0 { + label = "port0"; + reg = <0>; + }; + + port@1 { + label = "port1"; + reg = <1>; + }; + + port@2 { + label = "port2"; + reg = <2>; + }; + + port@3 { + label = "port3"; + reg = <3>; + }; + + port@4 { + label = "port4"; + reg = <4>; + }; + + port@5 { + label = "sfp"; + phy-mode = "sgmii"; + reg = <5>; + sfp = <&sfp>; + managed = "in-band-status"; + }; + + port@8 { + ethernet = <&amac2>; + label = "cpu"; + reg = <8>; + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + }; +}; + +&uart0 { + status = "okay"; +}; + +&usb3_phy { + status = "okay"; +}; + +&xhci { + status = "okay"; +}; diff --git a/dts/src/arm/broadcom/bcm958625k.dts b/dts/src/arm/broadcom/bcm958625k.dts new file mode 100644 index 0000000000..69ebc7a913 --- /dev/null +++ b/dts/src/arm/broadcom/bcm958625k.dts @@ -0,0 +1,271 @@ +/* + * BSD LICENSE + * + * Copyright(c) 2015 Broadcom Corporation. All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * * Neither the name of Broadcom Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/dts-v1/; + +#include "bcm-nsp.dtsi" + +/ { + model = "NorthStar Plus SVK (BCM958625K)"; + compatible = "brcm,bcm958625k", "brcm,bcm58625", "brcm,nsp"; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + memory@60000000 { + device_type = "memory"; + reg = <0x60000000 0x80000000>; + }; +}; + +&dma { + status = "okay"; +}; + +&amac0 { + status = "okay"; +}; + +&amac1 { + status = "okay"; +}; + +&amac2 { + status = "okay"; +}; + +&ehci0 { + status = "okay"; +}; + +&nand_controller { + nand@0 { + compatible = "brcm,nandcs"; + reg = <0>; + nand-on-flash-bbt; + + #address-cells = <1>; + #size-cells = <1>; + + nand-ecc-strength = <24>; + nand-ecc-step-size = <1024>; + + brcm,nand-oob-sector-size = <27>; + + partition@0 { + label = "nboot"; + reg = <0x00000000 0x00200000>; + read-only; + }; + partition@200000 { + label = "nenv"; + reg = <0x00200000 0x00400000>; + }; + partition@600000 { + label = "nsystem"; + reg = <0x00600000 0x00a00000>; + }; + partition@1000000 { + label = "nrootfs"; + reg = <0x01000000 0x03000000>; + }; + partition@4000000 { + label = "ncustfs"; + reg = <0x04000000 0x3c000000>; + }; + }; +}; + +&ohci0 { + status = "okay"; +}; + +&pcie0 { + status = "okay"; +}; + +&pcie1 { + status = "okay"; +}; + +&pcie2 { + status = "okay"; +}; + +&pinctrl { + pinctrl-names = "default"; + pinctrl-0 = <&nand_sel>, <&gpiobs>, <&pwmc>; + + nand_sel: nand_sel { + function = "nand"; + groups = "nand_grp"; + }; + + gpiobs: gpiobs { + function = "gpio_b"; + groups = "gpio_b_0_grp", "gpio_b_1_grp", "gpio_b_2_grp", + "gpio_b_3_grp"; + }; + + pwmc: pwmc { + function = "pwm"; + groups = "pwm0_grp", "pwm1_grp", "pwm2_grp", "pwm3_grp"; + }; + + emmc_sel: emmc_sel { + function = "emmc"; + groups = "emmc_grp"; + }; +}; + +&pwm { + status = "okay"; +}; + +&qspi { + status = "okay"; + bspi-sel = <0>; + flash: flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "m25p80"; + reg = <0x0>; + spi-max-frequency = <12500000>; + m25p,fast-read; + spi-cpol; + spi-cpha; + + partition@0 { + label = "boot"; + reg = <0x00000000 0x000a0000>; + }; + + partition@a0000 { + label = "env"; + reg = <0x000a0000 0x00060000>; + }; + + partition@100000 { + label = "system"; + reg = <0x00100000 0x00600000>; + }; + + partition@700000 { + label = "rootfs"; + reg = <0x00700000 0x01900000>; + }; + }; +}; + +&sata_phy0 { + status = "okay"; +}; + +&sata_phy1 { + status = "okay"; +}; + +&sata { + status = "okay"; +}; + +/* + * By default the sd slot is functional. For emmc to work add "<&emmc_sel>" + * and delete "<&nand_sel>" in "pinctrl-0" property of pinctrl node. Remove the + * bus-width property here and disable the nand node with status = "disabled";. + * + * Ex: pinctrl-0 = <&emmc_sel>, <&gpiobs>, <&pwmc>; + */ +&sdio { + bus-width = <4>; + no-1-8-v; + status = "okay"; +}; + +&srab { + compatible = "brcm,bcm58625-srab", "brcm,nsp-srab"; + status = "okay"; + + ports { + port@0 { + label = "port0"; + reg = <0>; + }; + + port@1 { + label = "port1"; + reg = <1>; + }; + + port@2 { + label = "port2"; + reg = <2>; + }; + + port@3 { + label = "port3"; + reg = <3>; + }; + + port@4 { + label = "port4"; + reg = <4>; + }; + + port@8 { + ethernet = <&amac2>; + label = "cpu"; + reg = <8>; + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + }; +}; + +&uart0 { + status = "okay"; +}; + +&uart1 { + status = "okay"; +}; + +&usb3_phy { + status = "okay"; +}; + +&xhci { + status = "okay"; +}; diff --git a/dts/src/arm/broadcom/bcm963138.dts b/dts/src/arm/broadcom/bcm963138.dts new file mode 100644 index 0000000000..7fd87e05ec --- /dev/null +++ b/dts/src/arm/broadcom/bcm963138.dts @@ -0,0 +1,41 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright 2022 Broadcom Ltd. + */ + +/dts-v1/; + +#include "bcm63138.dtsi" + +/ { + model = "Broadcom BCM963138 Reference Board"; + compatible = "brcm,bcm963138", "brcm,bcm63138", "brcm,bcmbca"; + + chosen { + bootargs = "console=ttyS0,115200"; + stdout-path = &serial0; + }; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x08000000>; + }; +}; + +&serial0 { + status = "okay"; +}; + +&hsspi { + status = "okay"; +}; + +&nand_controller { + brcm,wp-not-connected; + status = "okay"; +}; + +&nandcs { + nand-on-flash-bbt; + brcm,nand-ecc-use-strap; +}; diff --git a/dts/src/arm/broadcom/bcm963138dvt.dts b/dts/src/arm/broadcom/bcm963138dvt.dts new file mode 100644 index 0000000000..f60d09908a --- /dev/null +++ b/dts/src/arm/broadcom/bcm963138dvt.dts @@ -0,0 +1,56 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Broadcom BCM63138 Reference Board DTS + */ + +/dts-v1/; + +#include "bcm63138.dtsi" + +/ { + compatible = "brcm,BCM963138DVT", "brcm,bcm63138", "brcm,bcmbca"; + model = "Broadcom BCM963138DVT"; + + chosen { + bootargs = "console=ttyS0,115200"; + stdout-path = &serial0; + }; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x08000000>; + }; + +}; + +&serial0 { + status = "okay"; +}; + +&serial1 { + status = "okay"; +}; + +&nand_controller { + brcm,wp-not-connected; + status = "okay"; +}; + +&nandcs { + nand-ecc-strength = <4>; + nand-ecc-step-size = <512>; + brcm,nand-oob-sector-size = <16>; + nand-on-flash-bbt; +}; + +&ahci { + status = "okay"; +}; + +&sata_phy { + status = "okay"; +}; + +&hsspi { + status = "okay"; +}; diff --git a/dts/src/arm/broadcom/bcm963148.dts b/dts/src/arm/broadcom/bcm963148.dts new file mode 100644 index 0000000000..44bca063a3 --- /dev/null +++ b/dts/src/arm/broadcom/bcm963148.dts @@ -0,0 +1,44 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright 2019 Broadcom Ltd. + */ + +/dts-v1/; + +#include "bcm63148.dtsi" + +/ { + model = "Broadcom BCM963148 Reference Board"; + compatible = "brcm,bcm963148", "brcm,bcm63148", "brcm,bcmbca"; + + aliases { + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x08000000>; + }; +}; + +&uart0 { + status = "okay"; +}; + +&hsspi { + status = "okay"; +}; + +&nand_controller { + brcm,wp-not-connected; + status = "okay"; +}; + +&nandcs { + nand-on-flash-bbt; + brcm,nand-ecc-use-strap; +}; diff --git a/dts/src/arm/broadcom/bcm963178.dts b/dts/src/arm/broadcom/bcm963178.dts new file mode 100644 index 0000000000..098a222cd7 --- /dev/null +++ b/dts/src/arm/broadcom/bcm963178.dts @@ -0,0 +1,44 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright 2019 Broadcom Ltd. + */ + +/dts-v1/; + +#include "bcm63178.dtsi" + +/ { + model = "Broadcom BCM963178 Reference Board"; + compatible = "brcm,bcm963178", "brcm,bcm63178", "brcm,bcmbca"; + + aliases { + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x08000000>; + }; +}; + +&uart0 { + status = "okay"; +}; + +&hsspi { + status = "okay"; +}; + +&nand_controller { + brcm,wp-not-connected; + status = "okay"; +}; + +&nandcs { + nand-on-flash-bbt; + brcm,nand-ecc-use-strap; +}; diff --git a/dts/src/arm/broadcom/bcm96756.dts b/dts/src/arm/broadcom/bcm96756.dts new file mode 100644 index 0000000000..402038d3cd --- /dev/null +++ b/dts/src/arm/broadcom/bcm96756.dts @@ -0,0 +1,44 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright 2019 Broadcom Ltd. + */ + +/dts-v1/; + +#include "bcm6756.dtsi" + +/ { + model = "Broadcom BCM96756 Reference Board"; + compatible = "brcm,bcm96756", "brcm,bcm6756", "brcm,bcmbca"; + + aliases { + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x08000000>; + }; +}; + +&uart0 { + status = "okay"; +}; + +&hsspi { + status = "okay"; +}; + +&nand_controller { + brcm,wp-not-connected; + status = "okay"; +}; + +&nandcs { + nand-on-flash-bbt; + brcm,nand-ecc-use-strap; +}; diff --git a/dts/src/arm/broadcom/bcm96846.dts b/dts/src/arm/broadcom/bcm96846.dts new file mode 100644 index 0000000000..943896afb7 --- /dev/null +++ b/dts/src/arm/broadcom/bcm96846.dts @@ -0,0 +1,44 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright 2022 Broadcom Ltd. + */ + +/dts-v1/; + +#include "bcm6846.dtsi" + +/ { + model = "Broadcom BCM96846 Reference Board"; + compatible = "brcm,bcm96846", "brcm,bcm6846", "brcm,bcmbca"; + + aliases { + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x08000000>; + }; +}; + +&uart0 { + status = "okay"; +}; + +&hsspi { + status = "okay"; +}; + +&nand_controller { + brcm,wp-not-connected; + status = "okay"; +}; + +&nandcs { + nand-on-flash-bbt; + brcm,nand-ecc-use-strap; +}; diff --git a/dts/src/arm/broadcom/bcm96855.dts b/dts/src/arm/broadcom/bcm96855.dts new file mode 100644 index 0000000000..571663d9a1 --- /dev/null +++ b/dts/src/arm/broadcom/bcm96855.dts @@ -0,0 +1,44 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright 2019 Broadcom Ltd. + */ + +/dts-v1/; + +#include "bcm6855.dtsi" + +/ { + model = "Broadcom BCM96855 Reference Board"; + compatible = "brcm,bcm96855", "brcm,bcm6855", "brcm,bcmbca"; + + aliases { + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x08000000>; + }; +}; + +&uart0 { + status = "okay"; +}; + +&hsspi { + status = "okay"; +}; + +&nand_controller { + brcm,wp-not-connected; + status = "okay"; +}; + +&nandcs { + nand-on-flash-bbt; + brcm,nand-ecc-use-strap; +}; diff --git a/dts/src/arm/broadcom/bcm96878.dts b/dts/src/arm/broadcom/bcm96878.dts new file mode 100644 index 0000000000..8d6eddd54c --- /dev/null +++ b/dts/src/arm/broadcom/bcm96878.dts @@ -0,0 +1,44 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright 2019 Broadcom Ltd. + */ + +/dts-v1/; + +#include "bcm6878.dtsi" + +/ { + model = "Broadcom BCM96878 Reference Board"; + compatible = "brcm,bcm96878", "brcm,bcm6878", "brcm,bcmbca"; + + aliases { + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x08000000>; + }; +}; + +&uart0 { + status = "okay"; +}; + +&hsspi { + status = "okay"; +}; + +&nand_controller { + brcm,wp-not-connected; + status = "okay"; +}; + +&nandcs { + nand-on-flash-bbt; + brcm,nand-ecc-use-strap; +}; diff --git a/dts/src/arm/broadcom/bcm988312hr.dts b/dts/src/arm/broadcom/bcm988312hr.dts new file mode 100644 index 0000000000..e96bc3f2d5 --- /dev/null +++ b/dts/src/arm/broadcom/bcm988312hr.dts @@ -0,0 +1,231 @@ +/* + * BSD LICENSE + * + * Copyright(c) 2016 Broadcom. All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * * Neither the name of Broadcom Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/dts-v1/; + +#include "bcm-nsp.dtsi" +#include <dt-bindings/gpio/gpio.h> + +/ { + model = "NorthStar Plus SVK (BCM988312HR)"; + compatible = "brcm,bcm988312hr", "brcm,bcm88312", "brcm,nsp"; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + memory@60000000 { + device_type = "memory"; + reg = <0x60000000 0x80000000>; + }; + + gpio-restart { + compatible = "gpio-restart"; + gpios = <&gpioa 15 GPIO_ACTIVE_LOW>; + open-source; + priority = <200>; + }; +}; + +/* USB 3 support needed to be complete */ + +&dma { + status = "okay"; +}; + +&amac0 { + status = "okay"; +}; + +&amac1 { + status = "okay"; +}; + +&amac2 { + status = "okay"; +}; + +&ehci0 { + status = "okay"; +}; + +&nand_controller { + nand@0 { + compatible = "brcm,nandcs"; + reg = <0>; + nand-on-flash-bbt; + + #address-cells = <1>; + #size-cells = <1>; + + nand-ecc-strength = <24>; + nand-ecc-step-size = <1024>; + + brcm,nand-oob-sector-size = <27>; + + partition@0 { + label = "nboot"; + reg = <0x00000000 0x00200000>; + read-only; + }; + partition@200000 { + label = "nenv"; + reg = <0x00200000 0x00400000>; + }; + partition@600000 { + label = "nsystem"; + reg = <0x00600000 0x00a00000>; + }; + partition@1000000 { + label = "nrootfs"; + reg = <0x01000000 0x03000000>; + }; + partition@4000000 { + label = "ncustfs"; + reg = <0x04000000 0x3c000000>; + }; + }; +}; + +&ohci0 { + status = "okay"; +}; + +&pcie0 { + status = "okay"; +}; + +&pcie1 { + status = "okay"; +}; + +&pinctrl { + pinctrl-names = "default"; + pinctrl-0 = <&nand_sel>; + nand_sel: nand_sel { + function = "nand"; + groups = "nand_grp"; + }; +}; + +&qspi { + status = "okay"; + bspi-sel = <0>; + flash: flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "m25p80"; + reg = <0x0>; + spi-max-frequency = <12500000>; + m25p,fast-read; + spi-cpol; + spi-cpha; + + partition@0 { + label = "boot"; + reg = <0x00000000 0x000a0000>; + }; + + partition@a0000 { + label = "env"; + reg = <0x000a0000 0x00060000>; + }; + + partition@100000 { + label = "system"; + reg = <0x00100000 0x00600000>; + }; + + partition@700000 { + label = "rootfs"; + reg = <0x00700000 0x01900000>; + }; + }; +}; + +&sata_phy0 { + status = "okay"; +}; + +&sata_phy1 { + status = "okay"; +}; + +&sata { + status = "okay"; +}; + +&srab { + compatible = "brcm,bcm88312-srab", "brcm,nsp-srab"; + status = "okay"; + + ports { + port@0 { + label = "port0"; + reg = <0>; + }; + + port@1 { + label = "port1"; + reg = <1>; + }; + + port@2 { + label = "port2"; + reg = <2>; + }; + + port@3 { + label = "port3"; + reg = <3>; + }; + + port@4 { + label = "port4"; + reg = <4>; + }; + + port@8 { + ethernet = <&amac2>; + label = "cpu"; + reg = <8>; + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + }; +}; + +&uart0 { + status = "okay"; +}; diff --git a/dts/src/arm/broadcom/bcm9hmidc.dtsi b/dts/src/arm/broadcom/bcm9hmidc.dtsi new file mode 100644 index 0000000000..65397c0883 --- /dev/null +++ b/dts/src/arm/broadcom/bcm9hmidc.dtsi @@ -0,0 +1,42 @@ +/* + * BSD LICENSE + * + * Copyright(c) 2015 Broadcom Corporation. All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * * Neither the name of Broadcom Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/* + * Broadcom human machine interface daughter card (bcm9hmidc) installed on + * bcm958300k/bcm958305k boards + */ + +&touchscreen { + touchscreen-inverted-x; + touchscreen-inverted-y; + status = "okay"; +}; |