diff options
Diffstat (limited to 'dts/src/arm/exynos4210-trats.dts')
-rw-r--r-- | dts/src/arm/exynos4210-trats.dts | 563 |
1 files changed, 0 insertions, 563 deletions
diff --git a/dts/src/arm/exynos4210-trats.dts b/dts/src/arm/exynos4210-trats.dts deleted file mode 100644 index 01f44d95f6..0000000000 --- a/dts/src/arm/exynos4210-trats.dts +++ /dev/null @@ -1,563 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * Samsung's Exynos4210 based Trats board device tree source - * - * Copyright (c) 2012 Samsung Electronics Co., Ltd. - * http://www.samsung.com - * - * Device tree source file for Samsung's Trats board which is based on - * Samsung's Exynos4210 SoC. - */ - -/dts-v1/; -#include "exynos4210.dtsi" -#include <dt-bindings/gpio/gpio.h> - -/ { - model = "Samsung Trats based on Exynos4210"; - compatible = "samsung,trats", "samsung,exynos4210", "samsung,exynos4"; - chassis-type = "handset"; - - memory@40000000 { - device_type = "memory"; - reg = <0x40000000 0x10000000 - 0x50000000 0x10000000 - 0x60000000 0x10000000 - 0x70000000 0x10000000>; - }; - - chosen { - bootargs = "root=/dev/mmcblk0p5 rootwait earlyprintk panic=5"; - stdout-path = "serial2:115200n8"; - }; - - vemmc_reg: regulator-0 { - compatible = "regulator-fixed"; - regulator-name = "VMEM_VDD_2.8V"; - regulator-min-microvolt = <2800000>; - regulator-max-microvolt = <2800000>; - gpio = <&gpk0 2 GPIO_ACTIVE_HIGH>; - enable-active-high; - }; - - tsp_reg: regulator-1 { - compatible = "regulator-fixed"; - regulator-name = "TSP_FIXED_VOLTAGES"; - regulator-min-microvolt = <2800000>; - regulator-max-microvolt = <2800000>; - gpio = <&gpl0 3 GPIO_ACTIVE_HIGH>; - enable-active-high; - }; - - cam_af_28v_reg: regulator-2 { - compatible = "regulator-fixed"; - regulator-name = "8M_AF_2.8V_EN"; - regulator-min-microvolt = <2800000>; - regulator-max-microvolt = <2800000>; - gpio = <&gpk1 1 GPIO_ACTIVE_HIGH>; - enable-active-high; - }; - - cam_io_en_reg: regulator-3 { - compatible = "regulator-fixed"; - regulator-name = "CAM_IO_EN"; - regulator-min-microvolt = <2800000>; - regulator-max-microvolt = <2800000>; - gpio = <&gpe2 1 GPIO_ACTIVE_HIGH>; - enable-active-high; - }; - - cam_io_12v_reg: regulator-4 { - compatible = "regulator-fixed"; - regulator-name = "8M_1.2V_EN"; - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - gpio = <&gpe2 5 GPIO_ACTIVE_HIGH>; - enable-active-high; - }; - - vt_core_15v_reg: regulator-5 { - compatible = "regulator-fixed"; - regulator-name = "VT_CORE_1.5V"; - regulator-min-microvolt = <1500000>; - regulator-max-microvolt = <1500000>; - gpio = <&gpe2 2 GPIO_ACTIVE_HIGH>; - enable-active-high; - }; - - gpio-keys { - compatible = "gpio-keys"; - - vol-down-key { - gpios = <&gpx2 1 GPIO_ACTIVE_LOW>; - linux,code = <114>; - label = "volume down"; - debounce-interval = <10>; - }; - - vol-up-key { - gpios = <&gpx2 0 GPIO_ACTIVE_LOW>; - linux,code = <115>; - label = "volume up"; - debounce-interval = <10>; - }; - - power-key { - gpios = <&gpx2 7 GPIO_ACTIVE_LOW>; - linux,code = <116>; - label = "power"; - debounce-interval = <10>; - wakeup-source; - }; - - ok-key { - gpios = <&gpx3 5 GPIO_ACTIVE_LOW>; - linux,code = <352>; - label = "ok"; - debounce-interval = <10>; - }; - }; - - wlan_pwrseq: sdhci3-pwrseq { - compatible = "mmc-pwrseq-simple"; - reset-gpios = <&gpl1 2 GPIO_ACTIVE_LOW>; - }; - - fixed-rate-clocks { - xxti { - compatible = "samsung,clock-xxti"; - clock-frequency = <0>; - }; - - xusbxti { - compatible = "samsung,clock-xusbxti"; - clock-frequency = <24000000>; - }; - - pmic_ap_clk: pmic-ap-clk { - /* Workaround for missing clock on max8997 PMIC */ - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <32768>; - }; - }; -}; - -&camera { - pinctrl-names = "default"; - pinctrl-0 = <>; - status = "okay"; -}; - -&cpu0 { - cpu0-supply = <&varm_breg>; -}; - -&cpu_thermal { - cooling-maps { - map0 { - /* Corresponds to 800MHz at freq_table */ - cooling-device = <&cpu0 2 2>, <&cpu1 2 2>; - }; - map1 { - /* Corresponds to 200MHz at freq_table */ - cooling-device = <&cpu0 4 4>, <&cpu1 4 4>; - }; - }; -}; - -&dsi_0 { - vddcore-supply = <&vusb_reg>; - vddio-supply = <&vmipi_reg>; - samsung,burst-clock-frequency = <500000000>; - samsung,esc-clock-frequency = <20000000>; - samsung,pll-clock-frequency = <24000000>; - status = "okay"; - - panel@0 { - reg = <0>; - compatible = "samsung,s6e8aa0"; - vdd3-supply = <&vcclcd_reg>; - vci-supply = <&vlcd_reg>; - reset-gpios = <&gpy4 5 GPIO_ACTIVE_HIGH>; - power-on-delay= <50>; - reset-delay = <100>; - init-delay = <100>; - flip-horizontal; - flip-vertical; - panel-width-mm = <58>; - panel-height-mm = <103>; - - display-timings { - timing-0 { - clock-frequency = <57153600>; - hactive = <720>; - vactive = <1280>; - hfront-porch = <5>; - hback-porch = <5>; - hsync-len = <5>; - vfront-porch = <13>; - vback-porch = <1>; - vsync-len = <2>; - }; - }; - }; -}; - -&exynos_usbphy { - status = "okay"; - vbus-supply = <&safe1_sreg>; -}; - -&fimc_0 { - status = "okay"; - assigned-clocks = <&clock CLK_MOUT_FIMC0>, - <&clock CLK_SCLK_FIMC0>; - assigned-clock-parents = <&clock CLK_SCLK_MPLL>; - assigned-clock-rates = <0>, <160000000>; -}; - -&fimc_1 { - status = "okay"; - assigned-clocks = <&clock CLK_MOUT_FIMC1>, - <&clock CLK_SCLK_FIMC1>; - assigned-clock-parents = <&clock CLK_SCLK_MPLL>; - assigned-clock-rates = <0>, <160000000>; -}; - -&fimc_2 { - status = "okay"; - assigned-clocks = <&clock CLK_MOUT_FIMC2>, - <&clock CLK_SCLK_FIMC2>; - assigned-clock-parents = <&clock CLK_SCLK_MPLL>; - assigned-clock-rates = <0>, <160000000>; -}; - -&fimc_3 { - status = "okay"; - assigned-clocks = <&clock CLK_MOUT_FIMC3>, - <&clock CLK_SCLK_FIMC3>; - assigned-clock-parents = <&clock CLK_SCLK_MPLL>; - assigned-clock-rates = <0>, <160000000>; -}; - -&fimd { - status = "okay"; -}; - -&gpu { - status = "okay"; -}; - -&hsotg { - vusb_d-supply = <&vusb_reg>; - vusb_a-supply = <&vusbdac_reg>; - dr_mode = "peripheral"; - status = "okay"; -}; - -&i2c_3 { - samsung,i2c-sda-delay = <100>; - samsung,i2c-slave-addr = <0x10>; - samsung,i2c-max-bus-freq = <400000>; - pinctrl-0 = <&i2c3_bus>; - pinctrl-names = "default"; - status = "okay"; - - touchscreen@48 { - compatible = "melfas,mms114"; - reg = <0x48>; - interrupt-parent = <&gpx0>; - interrupts = <4 IRQ_TYPE_EDGE_FALLING>; - touchscreen-size-x = <720>; - touchscreen-size-y = <1280>; - avdd-supply = <&tsp_reg>; - vdd-supply = <&tsp_reg>; - }; -}; - -&i2c_5 { - samsung,i2c-sda-delay = <100>; - samsung,i2c-slave-addr = <0x10>; - samsung,i2c-max-bus-freq = <100000>; - pinctrl-0 = <&i2c5_bus>; - pinctrl-names = "default"; - status = "okay"; - - pmic@66 { - compatible = "maxim,max8997-pmic"; - - reg = <0x66>; - interrupts-extended = <&gpx0 7 IRQ_TYPE_LEVEL_LOW>, - <&gpx2 3 IRQ_TYPE_EDGE_FALLING>; - - max8997,pmic-buck1-uses-gpio-dvs; - max8997,pmic-buck2-uses-gpio-dvs; - max8997,pmic-buck5-uses-gpio-dvs; - - max8997,pmic-ignore-gpiodvs-side-effect; - max8997,pmic-buck125-default-dvs-idx = <0>; - - max8997,pmic-buck125-dvs-gpios = <&gpx0 5 GPIO_ACTIVE_HIGH>, - <&gpx0 6 GPIO_ACTIVE_HIGH>, - <&gpl0 0 GPIO_ACTIVE_HIGH>; - - max8997,pmic-buck1-dvs-voltage = <1350000>, <1300000>, - <1250000>, <1200000>, - <1150000>, <1100000>, - <1000000>, <950000>; - - max8997,pmic-buck2-dvs-voltage = <1100000>, <1000000>, - <950000>, <900000>, - <1100000>, <1000000>, - <950000>, <900000>; - - max8997,pmic-buck5-dvs-voltage = <1200000>, <1200000>, - <1200000>, <1200000>, - <1200000>, <1200000>, - <1200000>, <1200000>; - - regulators { - valive_reg: LDO2 { - regulator-name = "VALIVE_1.1V_C210"; - regulator-min-microvolt = <1100000>; - regulator-max-microvolt = <1100000>; - regulator-always-on; - }; - - vusb_reg: LDO3 { - regulator-name = "VUSB_1.1V_C210"; - regulator-min-microvolt = <1100000>; - regulator-max-microvolt = <1100000>; - }; - - vmipi_reg: LDO4 { - regulator-name = "VMIPI_1.8V"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - vpda_reg: LDO6 { - regulator-name = "VCC_1.8V_PDA"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - }; - - vcam_reg: LDO7 { - regulator-name = "CAM_ISP_1.8V"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - vusbdac_reg: LDO8 { - regulator-name = "VUSB+VDAC_3.3V_C210"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - }; - - vccpda_reg: LDO9 { - regulator-name = "VCC_2.8V_PDA"; - regulator-min-microvolt = <2800000>; - regulator-max-microvolt = <2800000>; - regulator-always-on; - }; - - vpll_reg: LDO10 { - regulator-name = "VPLL_1.1V_C210"; - regulator-min-microvolt = <1100000>; - regulator-max-microvolt = <1100000>; - regulator-always-on; - }; - - vtcam_reg: LDO12 { - regulator-name = "VT_CAM_1.8V"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - vcclcd_reg: LDO13 { - regulator-name = "VCC_3.3V_LCD"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - }; - - vlcd_reg: LDO15 { - regulator-name = "VLCD_2.2V"; - regulator-min-microvolt = <2200000>; - regulator-max-microvolt = <2200000>; - }; - - camsensor_reg: LDO16 { - regulator-name = "CAM_SENSOR_IO_1.8V"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - tflash_reg: LDO17 { - regulator-name = "VTF_2.8V"; - regulator-min-microvolt = <2800000>; - regulator-max-microvolt = <2800000>; - }; - - vddq_reg: LDO21 { - regulator-name = "VDDQ_M1M2_1.2V"; - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - regulator-always-on; - }; - - varm_breg: BUCK1 { - regulator-name = "VARM_1.2V_C210"; - regulator-min-microvolt = <900000>; - regulator-max-microvolt = <1350000>; - regulator-always-on; - }; - - vint_breg: BUCK2 { - regulator-name = "VINT_1.1V_C210"; - regulator-min-microvolt = <900000>; - regulator-max-microvolt = <1100000>; - regulator-always-on; - }; - - camisp_breg: BUCK4 { - regulator-name = "CAM_ISP_CORE_1.2V"; - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - }; - - vmem_breg: BUCK5 { - regulator-name = "VMEM_1.2V_C210"; - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - regulator-always-on; - }; - - vccsub_breg: BUCK7 { - regulator-name = "VCC_SUB_2.0V"; - regulator-min-microvolt = <2000000>; - regulator-max-microvolt = <2000000>; - regulator-always-on; - }; - - safe1_sreg: ESAFEOUT1 { - regulator-name = "SAFEOUT1"; - }; - - safe2_sreg: ESAFEOUT2 { - regulator-name = "SAFEOUT2"; - regulator-boot-on; - }; - - EN32KHZ_AP { - regulator-name = "EN32KHZ_AP"; - regulator-always-on; - }; - - EN32KHZ_CP { - regulator-name = "EN32KHZ_CP"; - regulator-always-on; - }; - }; - }; -}; - -&pinctrl_1 { - bt_shutdown: bt-shutdown-pins { - samsung,pins = "gpl1-0"; - samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>; - samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; - }; - - bt_host_wakeup: bt-host-wakeup-pins { - samsung,pins = "gpx2-6"; - samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>; - samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; - }; - - bt_device_wakeup: bt-device-wakeup-pins { - samsung,pins = "gpx3-1"; - samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>; - samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; - }; -}; - -&rtc { - status = "okay"; - clocks = <&clock CLK_RTC>, <&pmic_ap_clk>; - clock-names = "rtc", "rtc_src"; -}; - -&sdhci_0 { - bus-width = <8>; - non-removable; - pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus8>; - pinctrl-names = "default"; - vmmc-supply = <&vemmc_reg>; - status = "okay"; -}; - -&sdhci_2 { - bus-width = <4>; - pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_bus4>; - pinctrl-names = "default"; - vmmc-supply = <&tflash_reg>; - cd-gpios = <&gpx3 4 GPIO_ACTIVE_LOW>; - status = "okay"; -}; - -&sdhci_3 { - status = "okay"; - - #address-cells = <1>; - #size-cells = <0>; - - non-removable; - bus-width = <4>; - mmc-pwrseq = <&wlan_pwrseq>; - vmmc-supply = <&tflash_reg>; - - pinctrl-names = "default"; - pinctrl-0 = <&sd3_clk>, <&sd3_cmd>, <&sd3_bus4>; - - brcmf: wifi@1 { - compatible = "brcm,bcm4330-fmac", "brcm,bcm4329-fmac"; - reg = <1>; - - interrupt-parent = <&gpx2>; - interrupts = <5 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "host-wake"; - }; -}; - -&serial_0 { - status = "okay"; - pinctrl-0 = <&uart0_data &uart0_fctl>; - pinctrl-names = "default"; - - bluetooth { - compatible = "brcm,bcm4330-bt"; - pinctrl-0 = <&bt_shutdown &bt_device_wakeup &bt_host_wakeup>; - pinctrl-names = "default"; - shutdown-gpios = <&gpl1 0 GPIO_ACTIVE_HIGH>; - device-wakeup-gpios = <&gpx3 1 GPIO_ACTIVE_HIGH>; - host-wakeup-gpios = <&gpx2 6 GPIO_ACTIVE_HIGH>; - }; -}; - -&serial_1 { - status = "okay"; -}; - -&serial_2 { - status = "okay"; -}; - -&serial_3 { - status = "okay"; -}; - -&tmu { - status = "okay"; -}; |