diff options
Diffstat (limited to 'dts/src/arm/gemini-dlink-dns-313.dts')
-rw-r--r-- | dts/src/arm/gemini-dlink-dns-313.dts | 304 |
1 files changed, 0 insertions, 304 deletions
diff --git a/dts/src/arm/gemini-dlink-dns-313.dts b/dts/src/arm/gemini-dlink-dns-313.dts deleted file mode 100644 index 360642a02a..0000000000 --- a/dts/src/arm/gemini-dlink-dns-313.dts +++ /dev/null @@ -1,304 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * Device Tree file for D-Link DNS-313 1-Bay Network Storage Enclosure - */ - -/dts-v1/; - -#include "gemini.dtsi" -#include <dt-bindings/input/input.h> -#include <dt-bindings/thermal/thermal.h> - -/ { - model = "D-Link DNS-313 1-Bay Network Storage Enclosure"; - compatible = "dlink,dns-313", "cortina,gemini"; - #address-cells = <1>; - #size-cells = <1>; - - memory@0 { - /* 64 MB SDRAM in a Nanya NT5DS32M16BS-6K package */ - device_type = "memory"; - reg = <0x00000000 0x4000000>; - }; - - aliases { - mdio-gpio0 = &mdio0; - }; - - chosen { - bootargs = "console=ttyS0,19200n8 root=/dev/sda4 rw rootwait"; - stdout-path = "uart0:19200n8"; - }; - - gpio_keys { - compatible = "gpio-keys"; - - button-esc { - debounce-interval = <100>; - wakeup-source; - linux,code = <KEY_ESC>; - label = "reset"; - gpios = <&gpio1 31 GPIO_ACTIVE_LOW>; - }; - }; - - leds { - compatible = "gpio-leds"; - led-power { - label = "dns313:blue:power"; - gpios = <&gpio0 1 GPIO_ACTIVE_HIGH>; - default-state = "on"; - linux,default-trigger = "heartbeat"; - }; - led-disk-blue { - label = "dns313:blue:disk"; - gpios = <&gpio0 2 GPIO_ACTIVE_HIGH>; - default-state = "off"; - }; - led-disk-green { - label = "dns313:green:disk"; - gpios = <&gpio0 3 GPIO_ACTIVE_HIGH>; - default-state = "off"; - linux,default-trigger = "disk-read"; - }; - led-disk-red { - label = "dns313:red:disk"; - gpios = <&gpio0 4 GPIO_ACTIVE_HIGH>; - default-state = "off"; - linux,default-trigger = "disk-write"; - }; - }; - - /* - * This is a ADDA AD0405GB-G73 fan @3000 and 6000 RPM. - */ - fan0: gpio-fan { - compatible = "gpio-fan"; - gpios = <&gpio0 11 GPIO_ACTIVE_HIGH>, - <&gpio0 12 GPIO_ACTIVE_HIGH>; - gpio-fan,speed-map = <0 0>, <3000 1>, <6000 2>; - #cooling-cells = <2>; - }; - - - /* Global Mixed-Mode Technology G751 mounted on GPIO I2C */ - gpio-i2c { - compatible = "i2c-gpio"; - sda-gpios = <&gpio0 15 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>; - scl-gpios = <&gpio0 16 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>; - #address-cells = <1>; - #size-cells = <0>; - - g751: temperature-sensor@48 { - compatible = "gmt,g751"; - reg = <0x48>; - #thermal-sensor-cells = <0>; - }; - }; - - thermal-zones { - chassis-thermal { - /* Poll every 20 seconds */ - polling-delay = <20000>; - /* Poll every 2nd second when cooling */ - polling-delay-passive = <2000>; - - thermal-sensors = <&g751>; - - /* Tripping points from the fan.script in the rootfs */ - trips { - chassis_alert0: chassis-alert0 { - /* At 43 degrees turn on low speed */ - temperature = <43000>; - hysteresis = <3000>; - type = "active"; - }; - chassis_alert1: chassis-alert1 { - /* At 47 degrees turn on high speed */ - temperature = <47000>; - hysteresis = <3000>; - type = "active"; - }; - chassis_crit: chassis-crit { - /* Just shut down at 60 degrees */ - temperature = <60000>; - hysteresis = <2000>; - type = "critical"; - }; - }; - - cooling-maps { - map0 { - trip = <&chassis_alert0>; - cooling-device = <&fan0 1 1>; - }; - map1 { - trip = <&chassis_alert1>; - cooling-device = <&fan0 2 2>; - }; - }; - }; - }; - - mdio0: ethernet-phy { - compatible = "virtual,mdio-gpio"; - /* Uses MDC and MDIO */ - gpios = <&gpio0 22 GPIO_ACTIVE_HIGH>, /* MDC */ - <&gpio0 21 GPIO_ACTIVE_HIGH>; /* MDIO */ - #address-cells = <1>; - #size-cells = <0>; - - /* This is a Realtek RTL8211B Gigabit ethernet transceiver */ - phy0: ethernet-phy@1 { - reg = <1>; - device_type = "ethernet-phy"; - }; - }; - - soc { - flash@30000000 { - /* - * This is a Eon EN29LV400AB 512 KiB flash with - * three partitions. - */ - compatible = "cortina,gemini-flash", "jedec-flash"; - status = "okay"; - reg = <0x30000000 0x00080000>; - - /* - * This "RedBoot" is the Storlink derivative. - */ - partition@0 { - label = "RedBoot"; - reg = <0x00000000 0x00040000>; - read-only; - }; - partition@40000 { - label = "MTD1"; - reg = <0x00040000 0x00020000>; - read-only; - }; - partition@60000 { - label = "MTD2"; - reg = <0x00060000 0x00020000>; - read-only; - }; - }; - - syscon: syscon@40000000 { - pinctrl { - /* - */ - gpio0_default_pins: pinctrl-gpio0 { - mux { - function = "gpio0"; - groups = - /* Used by LEDs conflicts ICE */ - "gpio0bgrp", - /* Used by ? conflicts ICE */ - "gpio0cgrp", - /* - * Used by fan & G751, conflicts LPC, - * UART modem lines, SSP - */ - "gpio0egrp", - /* Used by G751 */ - "gpio0fgrp", - /* Used by MDIO */ - "gpio0igrp"; - }; - }; - gpio1_default_pins: pinctrl-gpio1 { - mux { - function = "gpio1"; - /* Used by "reset" button */ - groups = "gpio1dgrp"; - }; - }; - pinctrl-gmii { - mux { - function = "gmii"; - groups = "gmii_gmac0_grp"; - }; - /* - * In the vendor Linux tree, these values are set for the C3 - * version of the SL3512 ASIC with the comment "benson suggest" - */ - conf0 { - pins = "R8 GMAC0 RXDV", "U11 GMAC1 RXDV"; - skew-delay = <0>; - }; - conf1 { - pins = "T8 GMAC0 RXC"; - skew-delay = <10>; - }; - conf2 { - pins = "T11 GMAC1 RXC"; - skew-delay = <15>; - }; - conf3 { - pins = "P8 GMAC0 TXEN", "V11 GMAC1 TXEN"; - skew-delay = <7>; - }; - conf4 { - pins = "V7 GMAC0 TXC", "P10 GMAC1 TXC"; - skew-delay = <10>; - }; - conf5 { - /* The data lines all have default skew */ - pins = "U8 GMAC0 RXD0", "V8 GMAC0 RXD1", - "P9 GMAC0 RXD2", "R9 GMAC0 RXD3", - "R11 GMAC1 RXD0", "P11 GMAC1 RXD1", - "V12 GMAC1 RXD2", "U12 GMAC1 RXD3", - "R10 GMAC1 TXD0", "T10 GMAC1 TXD1", - "U10 GMAC1 TXD2", "V10 GMAC1 TXD3"; - skew-delay = <7>; - }; - conf6 { - pins = "U7 GMAC0 TXD0", "T7 GMAC0 TXD1", - "R7 GMAC0 TXD2", "P7 GMAC0 TXD3"; - skew-delay = <5>; - }; - /* Set up drive strength on GMAC0 to 16 mA */ - conf7 { - groups = "gmii_gmac0_grp"; - drive-strength = <16>; - }; - }; - }; - }; - - sata: sata@46000000 { - /* The ROM uses this muxmode */ - cortina,gemini-ata-muxmode = <0>; - cortina,gemini-enable-sata-bridge; - status = "okay"; - }; - - gpio0: gpio@4d000000 { - pinctrl-names = "default"; - pinctrl-0 = <&gpio0_default_pins>; - }; - - gpio1: gpio@4e000000 { - pinctrl-names = "default"; - pinctrl-0 = <&gpio1_default_pins>; - }; - - ethernet@60000000 { - status = "okay"; - - ethernet-port@0 { - phy-mode = "rgmii"; - phy-handle = <&phy0>; - }; - ethernet-port@1 { - /* Not used in this platform */ - }; - }; - - ata@63000000 { - status = "okay"; - }; - }; -}; |