diff options
Diffstat (limited to 'dts/src/arm/imx6dl-b1x5pv2.dtsi')
-rw-r--r-- | dts/src/arm/imx6dl-b1x5pv2.dtsi | 413 |
1 files changed, 0 insertions, 413 deletions
diff --git a/dts/src/arm/imx6dl-b1x5pv2.dtsi b/dts/src/arm/imx6dl-b1x5pv2.dtsi deleted file mode 100644 index ec5b664531..0000000000 --- a/dts/src/arm/imx6dl-b1x5pv2.dtsi +++ /dev/null @@ -1,413 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 or MIT -// -// Device Tree Source for General Electric B1x5Pv2 -// patient monitor series -// -// Copyright 2018-2021 General Electric Company -// Copyright 2018-2021 Collabora - -#include <dt-bindings/input/input.h> -#include "imx6dl-qmx6.dtsi" - -/ { - chosen { - stdout-path = &uart3; - }; - - /* Do not allow frequencies above 800MHz */ - cpus { - cpu@0 { - operating-points = < - /* kHz uV */ - 792000 1175000 - 396000 1150000 - >; - fsl,soc-operating-points = < - /* ARM kHz SOC-PU uV */ - 792000 1175000 - 396000 1175000 - >; - }; - - cpu@1 { - operating-points = < - /* kHz uV */ - 792000 1175000 - 396000 1150000 - >; - fsl,soc-operating-points = < - /* ARM kHz SOC-PU uV */ - 792000 1175000 - 396000 1175000 - >; - }; - }; - - reg_syspwr: regulator-12v { - compatible = "regulator-fixed"; - regulator-name = "SYS_PWR"; - regulator-min-microvolt = <12000000>; - regulator-max-microvolt = <12000000>; - }; - - reg_5v_pmc: regulator-5v-pmc { - compatible = "regulator-fixed"; - regulator-name = "5V PMC"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - vin-supply = <®_syspwr>; - }; - - reg_5v: regulator-5v { - compatible = "regulator-fixed"; - regulator-name = "5V"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - vin-supply = <®_syspwr>; - }; - - reg_3v3: regulator-3v3 { - compatible = "regulator-fixed"; - regulator-name = "3V3"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - vin-supply = <®_syspwr>; - }; - - reg_5v0_audio: regulator-5v0-audio { - compatible = "regulator-fixed"; - regulator-name = "5V0_AUDIO"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - vin-supply = <®_5v>; - gpio = <&tca6424a 16 GPIO_ACTIVE_HIGH>; - enable-active-high; - /* - * This must be always-on for da7212, which has some not - * properly documented dependencies for it's speaker supply - * pin. The issue manifests as speaker volume being very low. - */ - regulator-always-on; - }; - - - reg_3v3_audio: regulator-3v3-audio { - compatible = "regulator-fixed"; - regulator-name = "3V3_AUDIO"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - vin-supply = <®_3v3>; - pinctrl-0 = <&pinctrl_q7_hda_reset>; - pinctrl-names = "default"; - gpio = <&gpio6 8 GPIO_ACTIVE_HIGH>; - enable-active-high; - }; - - reg_2v5_audio: regulator-2v5-audio { - compatible = "regulator-fixed"; - regulator-name = "2V5_AUDIO"; - regulator-min-microvolt = <2500000>; - regulator-max-microvolt = <2500000>; - regulator-always-on; - vin-supply = <®_3v3_audio>; - - }; - - reg_wlan: regulator-wlan { - compatible = "regulator-fixed"; - regulator-name = "WLAN"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - vin-supply = <®_3v3>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_q7_sdio_power>; - gpio = <&gpio4 30 GPIO_ACTIVE_HIGH>; - enable-active-high; - startup-delay-us = <70000>; - }; - - reg_bl: regulator-backlight { - compatible = "regulator-fixed"; - regulator-name = "LED_VCC"; - regulator-min-microvolt = <12000000>; - regulator-max-microvolt = <12000000>; - vin-supply = <®_syspwr>; - pinctrl-0 = <&pinctrl_q7_lcd_power>; - pinctrl-names = "default"; - gpio = <&gpio1 7 GPIO_ACTIVE_HIGH>; - enable-active-high; - }; - - reg_lcd: regulator-lcd { - compatible = "regulator-fixed"; - regulator-name = "LCD_5V"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - vin-supply = <®_5v>; - }; - - usb_power: regulator-usb-power { - compatible = "regulator-fixed"; - regulator-name = "USB POWER"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - vin-supply = <®_5v>; - }; - - charger: battery-charger { - compatible = "gpio-charger"; /* ti,bq24172 */ - charger-type = "mains"; - gpios = <&tca6424a 3 GPIO_ACTIVE_LOW>; - charge-current-limit-gpios = <&tca6424a 11 GPIO_ACTIVE_HIGH>, - <&tca6424a 12 GPIO_ACTIVE_HIGH>; - charge-current-limit-mapping = <1300000 0x0>, - <700000 0x1>, - <0 0x2>; - charge-status-gpios = <&tca6424a 6 GPIO_ACTIVE_HIGH>; - }; - - poweroff { - compatible = "gpio-poweroff"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_q7_spi_cs1>; - gpios = <&gpio4 25 GPIO_ACTIVE_LOW>; - }; - - power-button-key { - compatible = "gpio-keys"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_q7_sleep_button>; - - power-button { - label = "power button"; - gpios = <&gpio4 7 GPIO_ACTIVE_LOW>; - linux,code = <KEY_POWER>; - }; - }; - - rotary-encoder-key { - compatible = "gpio-keys"; - - rotary-encoder-press { - label = "rotary-encoder press"; - gpios = <&tca6424a 0 GPIO_ACTIVE_HIGH>; - linux,code = <KEY_ENTER>; - linux,can-disable; - }; - }; - - rotary-encoder { - compatible = "rotary-encoder"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_q7_gpio2 &pinctrl_q7_gpio4>; - gpios = <&gpio4 26 GPIO_ACTIVE_LOW>, <&gpio1 0 GPIO_ACTIVE_LOW>; - rotary-encoder,relative-axis; - rotary-encoder,steps-per-period = <2>; - wakeup-source; - }; - - leds { - compatible = "gpio-leds"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_q7_gpio1 &pinctrl_q7_gpio3 &pinctrl_q7_gpio5>; - - alarm1 { - label = "alarm:red"; - gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>; - }; - - alarm2 { - label = "alarm:yellow"; - gpios = <&gpio4 27 GPIO_ACTIVE_HIGH>; - }; - - alarm3 { - label = "alarm:blue"; - gpios = <&gpio4 15 GPIO_ACTIVE_HIGH>; - }; - }; - - backlight: backlight { - compatible = "pwm-backlight"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_q7_backlight_enable>; - power-supply = <®_bl>; - pwms = <&pwm4 0 5000000 0>; - brightness-levels = <0 255>; - num-interpolated-steps = <255>; - default-brightness-level = <179>; - enable-gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>; - }; - - panel { - backlight = <&backlight>; - power-supply = <®_lcd>; - - port { - panel_in: endpoint { - remote-endpoint = <&lvds0_out>; - }; - }; - }; - - sound { - compatible = "simple-audio-card"; - simple-audio-card,name = "audio-card"; - simple-audio-card,format = "i2s"; - simple-audio-card,bitclock-master = <&dailink_master>; - simple-audio-card,frame-master = <&dailink_master>; - simple-audio-card,widgets = "Speaker", "Ext Spk"; - simple-audio-card,audio-routing = "Ext Spk", "LINE"; - - simple-audio-card,cpu { - sound-dai = <&ssi1>; - }; - - dailink_master: simple-audio-card,codec { - sound-dai = <&codec>; - }; - }; - - clk_ext_audio_codec: clock-codec { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <12288000>; - }; -}; - -&audmux { - status = "okay"; -}; - -&fec { - status = "okay"; -}; - -&hdmi { - status = "okay"; -}; - -&i2c1 { - battery: battery@b { - compatible = "ti,bq20z65", "sbs,sbs-battery"; - reg = <0x0b>; - sbs,battery-detect-gpios = <&tca6424a 5 GPIO_ACTIVE_LOW>; - sbs,i2c-retry-count = <5>; - power-supplies = <&charger>; - }; - - codec: audio-codec@1a { - compatible = "dlg,da7212"; - reg = <0x1a>; - #sound-dai-cells = <0>; - VDDA-supply = <®_2v5_audio>; - VDDSP-supply = <®_5v0_audio>; - VDDMIC-supply = <®_3v3_audio>; - VDDIO-supply = <®_3v3_audio>; - clocks = <&clk_ext_audio_codec>; - clock-names = "mclk"; - }; -}; - -&i2c5 { - tca6424a: gpio-controller@22 { - compatible = "ti,tca6424"; - reg = <0x22>; - gpio-controller; - #gpio-cells = <2>; - vcc-supply = <®_3v3>; - interrupt-parent = <&gpio7>; - interrupts = <11 IRQ_TYPE_LEVEL_LOW>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_q7_gpio6>; - interrupt-controller; - #interrupt-cells = <2>; - gpio-line-names = "GPIO_ROTOR#", "ACM_IO_INT", "TMP_SENSOR_IRQ", "AC_IN", - "TF_S", "BATT_T", "LED_INC_CHAR", "ACM1_OCF", - "ACM2_OCF", "ACM_IO_RST", "USB1_POWER_EN", "EGPIO_CC_CTL0", - "EGPIO_CC_CTL1", "12V_OEMNBP_EN", "CP2105_RST", "", - "SPEAKER_PA_EN", "ARM7_UPI_RESET", "ARM7_PWR_RST", "NURSE_CALL", - "MARKER_EN", "EGPIO_TOUCH_RST", "PRESSURE_INT1", "PRESSURE_INT2"; - - }; - - tmp75: temperature-sensor@48 { - compatible = "ti,tmp75"; - reg = <0x48>; - vs-supply = <®_3v3>; - interrupt-parent = <&tca6424a>; - interrupts = <2 IRQ_TYPE_EDGE_FALLING>; - }; -}; - -&ldb { - status = "okay"; - - lvds0: lvds-channel@0 { - status = "okay"; - fsl,data-mapping = "spwg"; - fsl,data-width = <24>; - - port@4 { - reg = <4>; - - lvds0_out: endpoint { - remote-endpoint = <&panel_in>; - }; - }; - }; -}; - -&pwm4 { - status = "okay"; -}; - -&ssi1 { - fsl,mode = "i2s-slave"; - status = "okay"; -}; - -&usbotg { - vbus-supply = <&usb_power>; - disable-over-current; - dr_mode = "host"; - status = "okay"; - - /* - * TPS2051BDGN fault-gpio is connected to Q7[86] USB_0_1_OC_N. - * On QMX6 this is not connceted to the i.MX6, but to the USB Hub - * from &usbh1. This means, that we cannot easily detect and handle - * over-current events. Fortunately the regulator limits the current - * automatically, so the hardware is still protected. - */ -}; - -&usdhc4 { - /* WiFi module */ - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usdhc4>; - bus-width = <4>; - no-1-8-v; - non-removable; - wakeup-source; - keep-power-in-suspend; - cap-power-off-card; - max-frequency = <25000000>; - vmmc-supply = <®_wlan>; - #address-cells = <1>; - #size-cells = <0>; - status = "okay"; - - wlcore: wlcore@2 { - compatible = "ti,wl1837"; - reg = <2>; - - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_q7_gpio7>; - - interrupt-parent = <&gpio4>; - interrupts = <14 IRQ_TYPE_LEVEL_HIGH>; - - tcxo-clock-frequency = <26000000>; - }; -}; |