diff options
Diffstat (limited to 'dts/src/arm/imx6dl-plym2m.dts')
| -rw-r--r-- | dts/src/arm/imx6dl-plym2m.dts | 131 |
1 files changed, 115 insertions, 16 deletions
diff --git a/dts/src/arm/imx6dl-plym2m.dts b/dts/src/arm/imx6dl-plym2m.dts index 60fe5f1466..c4ce23d8ac 100644 --- a/dts/src/arm/imx6dl-plym2m.dts +++ b/dts/src/arm/imx6dl-plym2m.dts @@ -50,6 +50,11 @@ }; }; + iio-hwmon { + compatible = "iio-hwmon"; + io-channels = <&vdiv_vaccu>; + }; + leds { compatible = "gpio-leds"; pinctrl-names = "default"; @@ -101,6 +106,64 @@ regulator-min-microvolt = <12000000>; regulator-max-microvolt = <12000000>; }; + + thermal-zones { + chassis-thermal { + polling-delay = <20000>; + polling-delay-passive = <0>; + thermal-sensors = <&tsens0>; + }; + + touch-thermal0 { + polling-delay = <20000>; + polling-delay-passive = <0>; + thermal-sensors = <&touch_temp0>; + }; + + touch-thermal1 { + polling-delay = <20000>; + polling-delay-passive = <0>; + thermal-sensors = <&touch_temp1>; + }; + }; + + touchscreen { + compatible = "resistive-adc-touch"; + io-channels = <&adc_ts 1>, <&adc_ts 3>, <&adc_ts 4>, + <&adc_ts 5>; + io-channel-names = "y", "z1", "z2", "x"; + touchscreen-min-pressure = <64687>; + touchscreen-inverted-x; + touchscreen-inverted-y; + touchscreen-x-plate-ohms = <300>; + touchscreen-y-plate-ohms = <800>; + }; + + touch_temp0: touch-temperature-sensor0 { + compatible = "generic-adc-thermal"; + #thermal-sensor-cells = <0>; + io-channels = <&adc_ts 0>; + io-channel-names = "sensor-channel"; + temperature-lookup-table = < (-40000) 736 + 85000 474>; + }; + + touch_temp1: touch-temperature-sensor1 { + compatible = "generic-adc-thermal"; + #thermal-sensor-cells = <0>; + io-channels = <&adc_ts 7>; + io-channel-names = "sensor-channel"; + temperature-lookup-table = < (-40000) 826 + 85000 609>; + }; + + vdiv_vaccu: voltage-divider-vaccu { + compatible = "voltage-divider"; + io-channels = <&adc_ts 2>; + output-ohms = <2500>; + full-ohms = <64000>; + #io-channel-cells = <0>; + }; }; &can1 { @@ -129,26 +192,61 @@ pinctrl-0 = <&pinctrl_ecspi2>; status = "okay"; - touchscreen@0 { - compatible = "ti,tsc2046"; + adc_ts: adc@0 { + compatible = "ti,tsc2046e-adc"; reg = <0>; pinctrl-0 = <&pinctrl_tsc2046>; pinctrl-names ="default"; - spi-max-frequency = <100000>; - interrupts-extended = <&gpio3 20 IRQ_TYPE_EDGE_FALLING>; - pendown-gpio = <&gpio3 20 GPIO_ACTIVE_LOW>; + spi-max-frequency = <1000000>; + interrupts-extended = <&gpio3 20 IRQ_TYPE_LEVEL_LOW>; + #io-channel-cells = <1>; - touchscreen-inverted-x; - touchscreen-inverted-y; - touchscreen-max-pressure = <4095>; + #address-cells = <1>; + #size-cells = <0>; + + channel@0 { + reg = <0>; + settling-time-us = <300>; + oversampling-ratio = <5>; + }; - ti,vref-delay-usecs = /bits/ 16 <100>; - ti,x-plate-ohms = /bits/ 16 <800>; - ti,y-plate-ohms = /bits/ 16 <300>; - ti,debounce-max = /bits/ 16 <3>; - ti,debounce-tol = /bits/ 16 <70>; - ti,debounce-rep = /bits/ 16 <3>; - wakeup-source; + channel@1 { + reg = <1>; + settling-time-us = <700>; + oversampling-ratio = <5>; + }; + + channel@2 { + reg = <2>; + settling-time-us = <300>; + oversampling-ratio = <5>; + }; + + channel@3 { + reg = <3>; + settling-time-us = <700>; + oversampling-ratio = <5>; + }; + + channel@4 { + reg = <4>; + settling-time-us = <700>; + oversampling-ratio = <5>; + }; + + channel@5 { + reg = <5>; + settling-time-us = <700>; + oversampling-ratio = <5>; + }; + + /* channel 6 is not connected */ + + channel@7 { + reg = <7>; + settling-time-us = <300>; + oversampling-ratio = <5>; + }; }; }; @@ -233,9 +331,10 @@ pinctrl-0 = <&pinctrl_i2c3>; status = "okay"; - temperature-sensor@70 { + tsens0: temperature-sensor@70 { compatible = "ti,tmp103"; reg = <0x70>; + #thermal-sensor-cells = <0>; }; }; |