diff options
Diffstat (limited to 'dts/src/arm/imx6qdl-sr-som.dtsi')
-rw-r--r-- | dts/src/arm/imx6qdl-sr-som.dtsi | 121 |
1 files changed, 0 insertions, 121 deletions
diff --git a/dts/src/arm/imx6qdl-sr-som.dtsi b/dts/src/arm/imx6qdl-sr-som.dtsi deleted file mode 100644 index 6d7f6b9035..0000000000 --- a/dts/src/arm/imx6qdl-sr-som.dtsi +++ /dev/null @@ -1,121 +0,0 @@ -/* - * Copyright (C) 2013,2014 Russell King - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. - */ -#include <dt-bindings/gpio/gpio.h> - -/ { - vcc_3v3: regulator-vcc-3v3 { - compatible = "regulator-fixed"; - regulator-always-on; - regulator-name = "vcc_3v3"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - }; -}; - -&fec { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_microsom_enet_ar8035>; - phy-mode = "rgmii-id"; - phy-reset-duration = <2>; - phy-reset-gpios = <&gpio4 15 GPIO_ACTIVE_LOW>; - status = "okay"; -}; - -&iomuxc { - microsom { - pinctrl_microsom_enet_ar8035: microsom-enet-ar8035 { - fsl,pins = < - MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b8b0 - MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0 - /* AR8035 reset */ - MX6QDL_PAD_KEY_ROW4__GPIO4_IO15 0x130b0 - /* AR8035 interrupt */ - MX6QDL_PAD_DI0_PIN2__GPIO4_IO18 0x1b0b0 - /* GPIO16 -> AR8035 25MHz */ - MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0x4001b0b0 - MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x13030 - MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b030 - MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b030 - MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b030 - MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x1b030 - MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b030 - /* AR8035 CLK_25M --> ENET_REF_CLK (V22) */ - MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x0a0b1 - /* AR8035 pin strapping: IO voltage: pull up */ - MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b030 - /* AR8035 pin strapping: PHYADDR#0: pull down */ - MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x13030 - /* AR8035 pin strapping: PHYADDR#1: pull down */ - MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x13030 - /* AR8035 pin strapping: MODE#1: pull up */ - MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b030 - /* AR8035 pin strapping: MODE#3: pull up */ - MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b030 - /* AR8035 pin strapping: MODE#0: pull down */ - MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x13030 - - /* - * As the RMII pins are also connected to RGMII - * so that an AR8030 can be placed, set these - * to high-z with the same pulls as above. - * Use the GPIO settings to avoid changing the - * input select registers. - */ - MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25 0x03000 - MX6QDL_PAD_ENET_RXD0__GPIO1_IO27 0x03000 - MX6QDL_PAD_ENET_RXD1__GPIO1_IO26 0x03000 - >; - }; - - pinctrl_microsom_uart1: microsom-uart1 { - fsl,pins = < - MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA 0x1b0b1 - MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA 0x1b0b1 - >; - }; - }; -}; - -&uart1 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_microsom_uart1>; - status = "okay"; -}; |