diff options
Diffstat (limited to 'dts/src/arm/imx7d.dtsi')
-rw-r--r-- | dts/src/arm/imx7d.dtsi | 220 |
1 files changed, 0 insertions, 220 deletions
diff --git a/dts/src/arm/imx7d.dtsi b/dts/src/arm/imx7d.dtsi deleted file mode 100644 index f8cba47536..0000000000 --- a/dts/src/arm/imx7d.dtsi +++ /dev/null @@ -1,220 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ OR MIT -// -// Copyright 2015 Freescale Semiconductor, Inc. -// Copyright 2016 Toradex AG - -#include "imx7s.dtsi" -#include <dt-bindings/reset/imx7-reset.h> - -/ { - aliases { - usb0 = &usbotg1; - usb1 = &usbotg2; - usb2 = &usbh; - }; - - cpus { - cpu0: cpu@0 { - clock-frequency = <996000000>; - operating-points-v2 = <&cpu0_opp_table>; - #cooling-cells = <2>; - nvmem-cells = <&fuse_grade>; - nvmem-cell-names = "speed_grade"; - }; - - cpu1: cpu@1 { - compatible = "arm,cortex-a7"; - device_type = "cpu"; - reg = <1>; - clock-frequency = <996000000>; - operating-points-v2 = <&cpu0_opp_table>; - #cooling-cells = <2>; - cpu-idle-states = <&cpu_sleep_wait>; - }; - }; - - timer { - compatible = "arm,armv7-timer"; - interrupt-parent = <&intc>; - interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, - <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, - <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, - <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>; - }; - - cpu0_opp_table: opp-table { - compatible = "operating-points-v2"; - opp-shared; - - opp-792000000 { - opp-hz = /bits/ 64 <792000000>; - opp-microvolt = <1000000>; - clock-latency-ns = <150000>; - opp-supported-hw = <0xd>, <0x7>; - opp-suspend; - }; - - opp-996000000 { - opp-hz = /bits/ 64 <996000000>; - opp-microvolt = <1100000>; - clock-latency-ns = <150000>; - opp-supported-hw = <0xc>, <0x7>; - opp-suspend; - }; - - opp-1200000000 { - opp-hz = /bits/ 64 <1200000000>; - opp-microvolt = <1225000>; - clock-latency-ns = <150000>; - opp-supported-hw = <0x8>, <0x3>; - opp-suspend; - }; - }; - - usbphynop2: usbphynop2 { - compatible = "usb-nop-xceiv"; - clocks = <&clks IMX7D_USB_PHY2_CLK>; - clock-names = "main_clk"; - #phy-cells = <0>; - }; - - soc { - etm@3007d000 { - compatible = "arm,coresight-etm3x", "arm,primecell"; - reg = <0x3007d000 0x1000>; - - /* - * System will hang if added nosmp in kernel command line - * without arm,primecell-periphid because amba bus try to - * read id and core1 power off at this time. - */ - arm,primecell-periphid = <0xbb956>; - cpu = <&cpu1>; - clocks = <&clks IMX7D_MAIN_AXI_ROOT_CLK>; - clock-names = "apb_pclk"; - - out-ports { - port { - etm1_out_port: endpoint { - remote-endpoint = <&ca_funnel_in_port1>; - }; - }; - }; - }; - - intc: interrupt-controller@31001000 { - compatible = "arm,cortex-a7-gic"; - interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>; - #interrupt-cells = <3>; - interrupt-controller; - interrupt-parent = <&intc>; - reg = <0x31001000 0x1000>, - <0x31002000 0x2000>, - <0x31004000 0x2000>, - <0x31006000 0x2000>; - }; - - pcie: pcie@33800000 { - compatible = "fsl,imx7d-pcie"; - reg = <0x33800000 0x4000>, - <0x4ff00000 0x80000>; - reg-names = "dbi", "config"; - #address-cells = <3>; - #size-cells = <2>; - device_type = "pci"; - bus-range = <0x00 0xff>; - ranges = <0x81000000 0 0 0x4ff80000 0 0x00010000>, /* downstream I/O */ - <0x82000000 0 0x40000000 0x40000000 0 0x0ff00000>; /* non-prefetchable memory */ - num-lanes = <1>; - interrupts = <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "msi"; - #interrupt-cells = <1>; - interrupt-map-mask = <0 0 0 0x7>; - /* - * Reference manual lists pci irqs incorrectly - * Real hardware ordering is same as imx6: D+MSI, C, B, A - */ - interrupt-map = <0 0 0 1 &intc GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>, - <0 0 0 2 &intc GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>, - <0 0 0 3 &intc GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>, - <0 0 0 4 &intc GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks IMX7D_PCIE_CTRL_ROOT_CLK>, - <&clks IMX7D_PLL_ENET_MAIN_100M_CLK>, - <&clks IMX7D_PCIE_PHY_ROOT_CLK>; - clock-names = "pcie", "pcie_bus", "pcie_phy"; - assigned-clocks = <&clks IMX7D_PCIE_CTRL_ROOT_SRC>, - <&clks IMX7D_PCIE_PHY_ROOT_SRC>; - assigned-clock-parents = <&clks IMX7D_PLL_ENET_MAIN_250M_CLK>, - <&clks IMX7D_PLL_ENET_MAIN_100M_CLK>; - - fsl,max-link-speed = <2>; - power-domains = <&pgc_pcie_phy>; - resets = <&src IMX7_RESET_PCIEPHY>, - <&src IMX7_RESET_PCIE_CTRL_APPS_EN>, - <&src IMX7_RESET_PCIE_CTRL_APPS_TURNOFF>; - reset-names = "pciephy", "apps", "turnoff"; - fsl,imx7d-pcie-phy = <&pcie_phy>; - status = "disabled"; - }; - }; -}; - -&aips2 { - pcie_phy: pcie-phy@306d0000 { - compatible = "fsl,imx7d-pcie-phy"; - reg = <0x306d0000 0x10000>; - status = "disabled"; - }; -}; - -&aips3 { - usbotg2: usb@30b20000 { - compatible = "fsl,imx7d-usb", "fsl,imx27-usb"; - reg = <0x30b20000 0x200>; - interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks IMX7D_USB_CTRL_CLK>; - fsl,usbphy = <&usbphynop2>; - fsl,usbmisc = <&usbmisc2 0>; - phy-clkgate-delay-us = <400>; - status = "disabled"; - }; - - usbmisc2: usbmisc@30b20200 { - #index-cells = <1>; - compatible = "fsl,imx7d-usbmisc", "fsl,imx6q-usbmisc"; - reg = <0x30b20200 0x200>; - }; - - fec2: ethernet@30bf0000 { - compatible = "fsl,imx7d-fec", "fsl,imx6sx-fec"; - reg = <0x30bf0000 0x10000>; - interrupt-names = "int0", "int1", "int2", "pps"; - interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks IMX7D_ENET2_IPG_ROOT_CLK>, - <&clks IMX7D_ENET_AXI_ROOT_CLK>, - <&clks IMX7D_ENET2_TIME_ROOT_CLK>, - <&clks IMX7D_PLL_ENET_MAIN_125M_CLK>, - <&clks IMX7D_ENET_PHY_REF_ROOT_CLK>; - clock-names = "ipg", "ahb", "ptp", - "enet_clk_ref", "enet_out"; - fsl,num-tx-queues = <3>; - fsl,num-rx-queues = <3>; - fsl,stop-mode = <&gpr 0x10 4>; - status = "disabled"; - }; -}; - -&ca_funnel_in_ports { - #address-cells = <1>; - #size-cells = <0>; - - port@1 { - reg = <1>; - ca_funnel_in_port1: endpoint { - remote-endpoint = <&etm1_out_port>; - }; - }; -}; |