diff options
Diffstat (limited to 'dts/src/arm/logicpd-torpedo-som.dtsi')
| -rw-r--r-- | dts/src/arm/logicpd-torpedo-som.dtsi | 84 |
1 files changed, 0 insertions, 84 deletions
diff --git a/dts/src/arm/logicpd-torpedo-som.dtsi b/dts/src/arm/logicpd-torpedo-som.dtsi index 6d89736c7b..b50b796e15 100644 --- a/dts/src/arm/logicpd-torpedo-som.dtsi +++ b/dts/src/arm/logicpd-torpedo-som.dtsi @@ -30,17 +30,6 @@ linux,default-trigger = "none"; }; }; - - wl12xx_vmmc: wl12xx_vmmc { - compatible = "regulator-fixed"; - regulator-name = "vwl1271"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - gpio = <&gpio5 29 0>; /* gpio157 */ - startup-delay-us = <70000>; - enable-active-high; - vin-supply = <&vmmc2>; - }; }; &gpmc { @@ -73,33 +62,6 @@ gpmc,device-width = <2>; #address-cells = <1>; #size-cells = <1>; - - /* u-boot uses mtdparts=omap2-nand.0:512k(x-loader),1920k(u-boot),128k(u-boot-env),4m(kernel),-(fs) */ - - x-loader@0 { - label = "x-loader"; - reg = <0 0x80000>; - }; - - bootloaders@80000 { - label = "u-boot"; - reg = <0x80000 0x1e0000>; - }; - - bootloaders_env@260000 { - label = "u-boot-env"; - reg = <0x260000 0x20000>; - }; - - kernel@280000 { - label = "kernel"; - reg = <0x280000 0x400000>; - }; - - filesystem@680000 { - label = "fs"; - reg = <0x680000 0>; /* 0 = MTDPART_SIZ_FULL */ - }; }; }; @@ -131,44 +93,7 @@ }; }; -/* - * Only found on the wireless SOM. For the SOM without wireless, the pins for - * MMC3 can be routed with jumpers to the second MMC slot on the devkit and - * gpio157 is not connected. So this should be OK to keep common for now, - * probably device tree overlays is the way to go with the various SOM and - * jumpering combinations for the long run. - */ -&mmc3 { - interrupts-extended = <&intc 94 &omap3_pmx_core2 0x46>; - pinctrl-0 = <&mmc3_pins &mmc3_core2_pins>; - pinctrl-names = "default"; - vmmc-supply = <&wl12xx_vmmc>; - non-removable; - bus-width = <4>; - cap-power-off-card; - #address-cells = <1>; - #size-cells = <0>; - wlcore: wlcore@2 { - compatible = "ti,wl1283"; - reg = <2>; - interrupt-parent = <&gpio5>; - interrupts = <24 IRQ_TYPE_LEVEL_HIGH>; /* gpio 152 */ - ref-clock-frequency = <26000000>; - tcxo-clock-frequency = <26000000>; - }; -}; - &omap3_pmx_core { - mmc3_pins: pinmux_mm3_pins { - pinctrl-single,pins = < - OMAP3_CORE1_IOPAD(0x2164, PIN_INPUT_PULLUP | MUX_MODE3) /* sdmmc2_dat4.sdmmc3_dat0 */ - OMAP3_CORE1_IOPAD(0x2166, PIN_INPUT_PULLUP | MUX_MODE3) /* sdmmc2_dat5.sdmmc3_dat1 */ - OMAP3_CORE1_IOPAD(0x2168, PIN_INPUT_PULLUP | MUX_MODE3) /* sdmmc2_dat6.sdmmc3_dat2 */ - OMAP3_CORE1_IOPAD(0x216a, PIN_INPUT_PULLUP | MUX_MODE3) /* sdmmc2_dat6.sdmmc3_dat3 */ - OMAP3_CORE1_IOPAD(0x2184, PIN_INPUT_PULLUP | MUX_MODE4) /* mcbsp4_clkx.gpio_152 */ - OMAP3_CORE1_IOPAD(0x218e, PIN_OUTPUT | MUX_MODE4) /* mcbsp1_fsr.gpio_157 */ - >; - }; mcbsp2_pins: pinmux_mcbsp2_pins { pinctrl-single,pins = < OMAP3_CORE1_IOPAD(0x213c, PIN_INPUT | MUX_MODE0) /* mcbsp2_fsx */ @@ -224,15 +149,6 @@ pinctrl-0 = <&mcspi1_pins>; }; -&omap3_pmx_core2 { - mmc3_core2_pins: pinmux_mmc3_core2_pins { - pinctrl-single,pins = < - OMAP3630_CORE2_IOPAD(0x25d8, PIN_INPUT_PULLUP | MUX_MODE2) /* etk_clk.sdmmc3_clk */ - OMAP3630_CORE2_IOPAD(0x25da, PIN_INPUT_PULLUP | MUX_MODE2) /* etk_ctl.sdmmc3_cmd */ - >; - }; -}; - #include "twl4030.dtsi" #include "twl4030_omap3.dtsi" |