diff options
Diffstat (limited to 'dts/src/arm/qcom-apq8064-ifc6410.dts')
-rw-r--r-- | dts/src/arm/qcom-apq8064-ifc6410.dts | 381 |
1 files changed, 0 insertions, 381 deletions
diff --git a/dts/src/arm/qcom-apq8064-ifc6410.dts b/dts/src/arm/qcom-apq8064-ifc6410.dts deleted file mode 100644 index 2638b380be..0000000000 --- a/dts/src/arm/qcom-apq8064-ifc6410.dts +++ /dev/null @@ -1,381 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -#include "qcom-apq8064-v2.0.dtsi" -#include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/pinctrl/qcom,pmic-gpio.h> - -/ { - model = "Qualcomm APQ8064/IFC6410"; - compatible = "qcom,apq8064-ifc6410", "qcom,apq8064"; - - aliases { - serial0 = &gsbi7_serial; - serial1 = &gsbi6_serial; - i2c0 = &gsbi1_i2c; - i2c1 = &gsbi2_i2c; - i2c2 = &gsbi3_i2c; - i2c3 = &gsbi4_i2c; - spi0 = &gsbi5_spi; - }; - - chosen { - stdout-path = "serial0:115200n8"; - }; - - pwrseq { - compatible = "simple-bus"; - - sdcc4_pwrseq: sdcc4_pwrseq { - pinctrl-names = "default"; - pinctrl-0 = <&wlan_default_gpios>; - compatible = "mmc-pwrseq-simple"; - reset-gpios = <&pm8921_gpio 43 GPIO_ACTIVE_LOW>; - }; - }; - - leds { - compatible = "gpio-leds"; - pinctrl-names = "default"; - pinctrl-0 = <¬ify_led>; - - led@1 { - label = "apq8064:green:user1"; - gpios = <&pm8921_gpio 18 GPIO_ACTIVE_HIGH>; - default-state = "on"; - }; - }; - - hdmi-out { - compatible = "hdmi-connector"; - type = "d"; - - port { - hdmi_con: endpoint { - remote-endpoint = <&hdmi_out>; - }; - }; - }; - - soc { - pinctrl@800000 { - card_detect: card_detect { - mux { - pins = "gpio26"; - function = "gpio"; - bias-disable; - }; - }; - - pcie_pins: pcie_pinmux { - mux { - pins = "gpio27"; - function = "gpio"; - }; - conf { - pins = "gpio27"; - drive-strength = <12>; - bias-disable; - }; - }; - }; - - rpm@108000 { - regulators { - vin_lvs1_3_6-supply = <&pm8921_s4>; - vin_lvs2-supply = <&pm8921_s1>; - vin_lvs4_5_7-supply = <&pm8921_s4>; - - vdd_l1_l2_l12_l18-supply = <&pm8921_s4>; - vdd_l24-supply = <&pm8921_s1>; - vdd_l25-supply = <&pm8921_s1>; - vdd_l26-supply = <&pm8921_s7>; - vdd_l27-supply = <&pm8921_s7>; - vdd_l28-supply = <&pm8921_s7>; - - - /* Buck SMPS */ - s1 { - regulator-always-on; - regulator-min-microvolt = <1225000>; - regulator-max-microvolt = <1225000>; - qcom,switch-mode-frequency = <3200000>; - bias-pull-down; - }; - - s3 { - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <1400000>; - qcom,switch-mode-frequency = <4800000>; - }; - - s4 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - qcom,switch-mode-frequency = <3200000>; - }; - - s7 { - regulator-min-microvolt = <1300000>; - regulator-max-microvolt = <1300000>; - qcom,switch-mode-frequency = <3200000>; - }; - - l3 { - regulator-min-microvolt = <3050000>; - regulator-max-microvolt = <3300000>; - bias-pull-down; - }; - - l4 { - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <1800000>; - bias-pull-down; - }; - - l5 { - regulator-min-microvolt = <2750000>; - regulator-max-microvolt = <3000000>; - bias-pull-down; - }; - - l6 { - regulator-min-microvolt = <2950000>; - regulator-max-microvolt = <2950000>; - bias-pull-down; - }; - - l23 { - regulator-min-microvolt = <1700000>; - regulator-max-microvolt = <1900000>; - bias-pull-down; - }; - - lvs1 { - bias-pull-down; - }; - - lvs6 { - bias-pull-down; - }; - }; - }; - - ext_3p3v: regulator-fixed@1 { - compatible = "regulator-fixed"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-name = "ext_3p3v"; - regulator-type = "voltage"; - startup-delay-us = <0>; - gpio = <&tlmm_pinmux 77 GPIO_ACTIVE_HIGH>; - enable-active-high; - regulator-boot-on; - }; - - gsbi3: gsbi@16200000 { - status = "okay"; - qcom,mode = <GSBI_PROT_I2C>; - i2c@16280000 { - status = "okay"; - }; - }; - - gsbi@16300000 { - status = "okay"; - qcom,mode = <GSBI_PROT_I2C>; - /* CAM I2C MIPI-CSI connector */ - i2c@16380000 { - status = "okay"; - }; - }; - - gsbi@12440000 { - status = "okay"; - qcom,mode = <GSBI_PROT_I2C>; - - i2c@12460000 { - status = "okay"; - clock-frequency = <200000>; - - eeprom@52 { - compatible = "atmel,24c128"; - reg = <0x52>; - pagesize = <32>; - }; - }; - }; - - gsbi@1a200000 { - qcom,mode = <GSBI_PROT_SPI>; - status = "okay"; - spi4: spi@1a280000 { - status = "okay"; - num-cs = <1>; - cs-gpios = <&tlmm_pinmux 53 0>; - }; - }; - - gsbi@16500000 { - status = "okay"; - qcom,mode = <GSBI_PROT_UART_W_FC>; - - serial@16540000 { - status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&gsbi6_uart_4pins>; - }; - }; - - gsbi@16600000 { - status = "okay"; - qcom,mode = <GSBI_PROT_I2C_UART>; - serial@16640000 { - status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&gsbi7_uart_2pins>; - }; - }; - - sata_phy0: phy@1b400000 { - status = "okay"; - }; - - sata0: sata@29000000 { - status = "okay"; - target-supply = <&pm8921_s4>; - }; - - /* OTG */ - usb@12500000 { - status = "okay"; - dr_mode = "otg"; - ulpi { - phy { - v3p3-supply = <&pm8921_l3>; - v1p8-supply = <&pm8921_l4>; - }; - }; - }; - - usb@12520000 { - status = "okay"; - dr_mode = "host"; - ulpi { - phy { - v3p3-supply = <&pm8921_l3>; - v1p8-supply = <&pm8921_l23>; - }; - }; - }; - - usb@12530000 { - status = "okay"; - dr_mode = "host"; - ulpi { - phy { - v3p3-supply = <&pm8921_l3>; - v1p8-supply = <&pm8921_l23>; - }; - }; - }; - - pci@1b500000 { - status = "okay"; - vdda-supply = <&pm8921_s3>; - vdda_phy-supply = <&pm8921_lvs6>; - vdda_refclk-supply = <&ext_3p3v>; - pinctrl-0 = <&pcie_pins>; - pinctrl-names = "default"; - perst-gpio = <&tlmm_pinmux 27 GPIO_ACTIVE_LOW>; - }; - - qcom,ssbi@500000 { - pmic@0 { - gpio@150 { - wlan_default_gpios: wlan-gpios { - pios { - pins = "gpio43"; - function = "normal"; - bias-disable; - power-source = <PM8921_GPIO_S4>; - }; - }; - - notify_led: nled { - pios { - pins = "gpio18"; - function = "normal"; - bias-disable; - power-source = <PM8921_GPIO_S4>; - }; - }; - }; - }; - }; - - amba { - /* eMMC */ - sdcc1: mmc@12400000 { - status = "okay"; - vmmc-supply = <&pm8921_l5>; - vqmmc-supply = <&pm8921_s4>; - }; - - /* External micro SD card */ - sdcc3: mmc@12180000 { - status = "okay"; - vmmc-supply = <&pm8921_l6>; - pinctrl-names = "default"; - pinctrl-0 = <&card_detect>; - cd-gpios = <&tlmm_pinmux 26 GPIO_ACTIVE_LOW>; - }; - /* WLAN */ - sdcc4: mmc@121c0000 { - status = "okay"; - vmmc-supply = <&ext_3p3v>; - vqmmc-supply = <&pm8921_lvs1>; - mmc-pwrseq = <&sdcc4_pwrseq>; - }; - }; - - hdmi-tx@4a00000 { - status = "okay"; - - core-vdda-supply = <&pm8921_hdmi_switch>; - hdmi-mux-supply = <&ext_3p3v>; - - hpd-gpios = <&tlmm_pinmux 72 GPIO_ACTIVE_HIGH>; - - ports { - port@0 { - endpoint { - remote-endpoint = <&mdp_dtv_out>; - }; - }; - - port@1 { - endpoint { - remote-endpoint = <&hdmi_con>; - }; - }; - }; - }; - - hdmi-phy@4a00400 { - status = "okay"; - - core-vdda-supply = <&pm8921_hdmi_switch>; - }; - - mdp@5100000 { - status = "okay"; - - ports { - port@3 { - endpoint { - remote-endpoint = <&hdmi_in>; - }; - }; - }; - }; - }; -}; |